xscale: Move the Intel XScale IXP drivers

Move the Intel XScale IXP drivers into drivers/net/ethernet/xscale/
and make the necessary Kconfig and Makefile changes.

CC: Krzysztof Halasa <khc@pm.waw.pl>
CC: Lennert Buytenhek <kernel@wantstofly.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This commit is contained in:
Jeff Kirsher 2011-07-14 22:13:23 -07:00
parent d9fb9f3842
commit b47da97728
26 changed files with 42 additions and 15 deletions

View File

@ -3319,7 +3319,7 @@ F: arch/arm/mach-ixp4xx/include/mach/qmgr.h
F: arch/arm/mach-ixp4xx/include/mach/npe.h
F: arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
F: arch/arm/mach-ixp4xx/ixp4xx_npe.c
F: drivers/net/arm/ixp4xx_eth.c
F: drivers/net/ethernet/xscale/ixp4xx_eth.c
F: drivers/net/wan/ixp4xx_hss.c
INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
@ -3331,7 +3331,7 @@ INTEL IXP2000 ETHERNET DRIVER
M: Lennert Buytenhek <kernel@wantstofly.org>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ixp2000/
F: drivers/net/ethernet/xscale/ixp2000/
INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/igbvf/ixgb/ixgbe/ixgbevf)
M: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

View File

@ -989,8 +989,6 @@ config IP1000
To compile this driver as a module, choose M here: the module
will be called ipg. This is recommended.
source "drivers/net/ixp2000/Kconfig"
config HAMACHI
tristate "Packet Engines Hamachi GNIC-II support"
depends on PCI

View File

@ -166,7 +166,6 @@ obj-$(CONFIG_NET_TULIP) += tulip/
obj-$(CONFIG_HAMRADIO) += hamradio/
obj-$(CONFIG_IRDA) += irda/
obj-$(CONFIG_ETRAX_ETHERNET) += cris/
obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
obj-$(CONFIG_NETCONSOLE) += netconsole.o

View File

@ -34,14 +34,6 @@ config EP93XX_ETH
This is a driver for the ethernet hardware included in EP93xx CPUs.
Say Y if you are building a kernel for EP93xx based devices.
config IXP4XX_ETH
tristate "Intel IXP4xx Ethernet support"
depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
select PHYLIB
help
Say Y here if you want to use built-in Ethernet ports
on IXP4xx processor.
config W90P910_ETH
tristate "Nuvoton w90p910 Ethernet support"
depends on ARM && ARCH_W90X900

View File

@ -7,5 +7,4 @@ obj-$(CONFIG_ARM_ETHER3) += ether3.o
obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695net.o
obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
obj-$(CONFIG_W90P910_ETH) += w90p910_ether.o

View File

@ -23,6 +23,7 @@ source "drivers/net/ethernet/neterion/Kconfig"
source "drivers/net/ethernet/ibm/Kconfig"
source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/i825xx/Kconfig"
source "drivers/net/ethernet/xscale/Kconfig"
source "drivers/net/ethernet/mellanox/Kconfig"
source "drivers/net/ethernet/myricom/Kconfig"
source "drivers/net/ethernet/natsemi/Kconfig"

View File

@ -15,6 +15,7 @@ obj-$(CONFIG_NET_VENDOR_EXAR) += neterion/
obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
obj-$(CONFIG_NET_VENDOR_XSCALE) += xscale/
obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/

View File

@ -0,0 +1,31 @@
#
# Intel XScale IXP device configuration
#
config NET_VENDOR_XSCALE
bool "Intel XScale IXP devices"
depends on NET_VENDOR_INTEL && ((ARM && ARCH_IXP4XX && \
IXP4XX_NPE && IXP4XX_QMGR) || ARCH_ENP2611)
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
Note that the answer to this question does not directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about XSacle IXP devices. If you say Y, you will be
asked for your specific card in the following questions.
if NET_VENDOR_XSCALE
config IXP4XX_ETH
tristate "Intel IXP4xx Ethernet support"
depends on ARM && ARCH_IXP4XX && IXP4XX_NPE && IXP4XX_QMGR
select PHYLIB
---help---
Say Y here if you want to use built-in Ethernet ports
on IXP4xx processor.
source "drivers/net/ethernet/xscale/ixp2000/Kconfig"
endif # NET_VENDOR_XSCALE

View File

@ -0,0 +1,6 @@
#
# Makefile for the Intel XScale IXP device drivers.
#
obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o

View File

@ -1,6 +1,6 @@
config ENP2611_MSF_NET
tristate "Radisys ENP2611 MSF network interface support"
depends on ARCH_ENP2611
help
---help---
This is a driver for the MSF network interface unit in
the IXP2400 on the Radisys ENP2611 platform.