gigaset: documentation update

Mention handling of unregisteted DECT wireless datasets in README.gigaset.

Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Tilman Schmidt 2009-05-13 12:44:17 +00:00 committed by David S. Miller
parent 7226d7c960
commit b3fcb13f1c
1 changed files with 22 additions and 1 deletions

View File

@ -192,7 +192,6 @@ GigaSet 307x Device Driver
2.6. M105 Undocumented USB Requests
------------------------------
The Gigaset M105 USB data box understands a couple of useful, but
undocumented USB commands. These requests are not used in normal
operation (for wireless access to the base), but are needed for access
@ -204,6 +203,20 @@ GigaSet 307x Device Driver
M105, try setting that option to "y" via 'make {x,menu}config' and
recompiling the driver.
2.7. Unregistered Wireless Devices (M101/M105)
-----------------------------------------
The main purpose of the ser_gigaset and usb_gigaset drivers is to allow
the M101 and M105 wireless devices to be used as ISDN devices for ISDN
connections through a Gigaset base. Therefore they assume that the device
is registered to a DECT base.
If the M101/M105 device is not registered to a base, initialization of
the device fails, and a corresponding error message is logged by the
driver. In that situation, a restricted set of functions is available
which includes, in particular, those necessary for registering the device
to a base or for switching it between Fixed Part and Portable Part
modes. For the M105, these commands require the "Support for undocumented
USB requests" configuration option (see section 2.6.) to be enabled.
3. Troubleshooting
---------------
@ -240,6 +253,14 @@ GigaSet 307x Device Driver
Recompile the usb_gigaset driver with the kernel configuration option
CONFIG_GIGASET_UNDOCREQ set to 'y'. (see section 2.6.)
Problem:
Messages like this:
usb_gigaset 3-2:1.0: Could not initialize the device.
appear in your syslog.
Solution:
Check whether your M10x wireless device is correctly registered to the
Gigaset base. (see section 2.7.)
3.2. Telling the driver to provide more information
----------------------------------------------
Building the driver with the "Gigaset debugging" kernel configuration