Blackfin Serial Driver: Fix bug - ircp fails on sir over Blackfin UART

We now use the sir_dev/irtty_sir/uart/bfin_serial drivers framework
to monitor the TX status.

Signed-off-by: Graf Yang <graf.yang@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This commit is contained in:
Graf Yang 2008-10-13 10:33:42 +01:00 committed by Linus Torvalds
parent 5ffdeea2f9
commit b3ef5aba64
6 changed files with 17 additions and 0 deletions

View File

@ -78,6 +78,9 @@
# define CONFIG_UART1_RTS_PIN -1
# endif
#endif
#define BFIN_UART_TX_FIFO_SIZE 2
/*
* The pin configuration is different from schematic
*/

View File

@ -69,6 +69,8 @@
# endif
#endif
#define BFIN_UART_TX_FIFO_SIZE 2
struct bfin_serial_port {
struct uart_port port;
unsigned int old_status;

View File

@ -78,6 +78,9 @@
# define CONFIG_UART1_RTS_PIN -1
# endif
#endif
#define BFIN_UART_TX_FIFO_SIZE 2
/*
* The pin configuration is different from schematic
*/

View File

@ -82,6 +82,9 @@
# define CONFIG_UART1_RTS_PIN -1
# endif
#endif
#define BFIN_UART_TX_FIFO_SIZE 2
/*
* The pin configuration is different from schematic
*/

View File

@ -69,6 +69,8 @@
# endif
#endif
#define BFIN_UART_TX_FIFO_SIZE 2
struct bfin_serial_port {
struct uart_port port;
unsigned int old_status;

View File

@ -761,6 +761,9 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
val |= UCEN;
UART_PUT_GCTL(uart, val);
/* Port speed changed, update the per-port timeout. */
uart_update_timeout(port, termios->c_cflag, baud);
spin_unlock_irqrestore(&uart->port.lock, flags);
}
@ -865,6 +868,7 @@ static void __init bfin_serial_init_ports(void)
for (i = 0; i < nr_active_ports; i++) {
bfin_serial_ports[i].port.uartclk = get_sclk();
bfin_serial_ports[i].port.fifosize = BFIN_UART_TX_FIFO_SIZE;
bfin_serial_ports[i].port.ops = &bfin_serial_pops;
bfin_serial_ports[i].port.line = i;
bfin_serial_ports[i].port.iotype = UPIO_MEM;