MXC: mach_armadillo5x0: Add USB Host support.
This add USB Host capability. The Armadillo 500 board is supplied with two USB Host connectors driven by the USB OTG and USB Host 2 ports, through two NXP isp 1504 transceivers. Signed-off-by: Alberto Panizzo <maramaopercheseimorto@gmail.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit is contained in:
Alberto Panizzo
Sascha Hauer
parent
17669fd60e
commit
b3aa111f7a
|
|
@ -104,6 +104,7 @@ config MACH_PCM043
|
|||
config MACH_ARMADILLO5X0
|
||||
bool "Support Atmark Armadillo-500 Development Base Board"
|
||||
select ARCH_MX31
|
||||
select MXC_ULPI if USB_ULPI
|
||||
help
|
||||
Include support for Atmark Armadillo-500 platform. This includes
|
||||
specific configurations for the board and its peripherals.
|
||||
|
|
|
|||
|
|
@ -36,6 +36,9 @@
|
|||
#include <linux/input.h>
|
||||
#include <linux/gpio_keys.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/usb/otg.h>
|
||||
#include <linux/usb/ulpi.h>
|
||||
#include <linux/delay.h>
|
||||
|
||||
#include <mach/hardware.h>
|
||||
#include <asm/mach-types.h>
|
||||
|
|
@ -52,6 +55,8 @@
|
|||
#include <mach/ipu.h>
|
||||
#include <mach/mx3fb.h>
|
||||
#include <mach/mxc_nand.h>
|
||||
#include <mach/mxc_ehci.h>
|
||||
#include <mach/ulpi.h>
|
||||
|
||||
#include "devices.h"
|
||||
#include "crm_regs.h"
|
||||
|
|
@ -103,8 +108,158 @@ static int armadillo5x0_pins[] = {
|
|||
/* I2C2 */
|
||||
MX31_PIN_CSPI2_MOSI__SCL,
|
||||
MX31_PIN_CSPI2_MISO__SDA,
|
||||
/* OTG */
|
||||
MX31_PIN_USBOTG_DATA0__USBOTG_DATA0,
|
||||
MX31_PIN_USBOTG_DATA1__USBOTG_DATA1,
|
||||
MX31_PIN_USBOTG_DATA2__USBOTG_DATA2,
|
||||
MX31_PIN_USBOTG_DATA3__USBOTG_DATA3,
|
||||
MX31_PIN_USBOTG_DATA4__USBOTG_DATA4,
|
||||
MX31_PIN_USBOTG_DATA5__USBOTG_DATA5,
|
||||
MX31_PIN_USBOTG_DATA6__USBOTG_DATA6,
|
||||
MX31_PIN_USBOTG_DATA7__USBOTG_DATA7,
|
||||
MX31_PIN_USBOTG_CLK__USBOTG_CLK,
|
||||
MX31_PIN_USBOTG_DIR__USBOTG_DIR,
|
||||
MX31_PIN_USBOTG_NXT__USBOTG_NXT,
|
||||
MX31_PIN_USBOTG_STP__USBOTG_STP,
|
||||
/* USB host 2 */
|
||||
IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC),
|
||||
IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC),
|
||||
IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC),
|
||||
IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC),
|
||||
IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC),
|
||||
IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC),
|
||||
IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC),
|
||||
IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC),
|
||||
IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC),
|
||||
IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC),
|
||||
IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC),
|
||||
IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC),
|
||||
};
|
||||
|
||||
/* USB */
|
||||
#if defined(CONFIG_USB_ULPI)
|
||||
|
||||
#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4)
|
||||
#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6)
|
||||
#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)
|
||||
|
||||
#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
|
||||
PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
|
||||
|
||||
static int usbotg_init(struct platform_device *pdev)
|
||||
{
|
||||
int err;
|
||||
|
||||
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG);
|
||||
|
||||
/* Chip already enabled by hardware */
|
||||
/* OTG phy reset*/
|
||||
err = gpio_request(OTG_RESET, "USB-OTG-RESET");
|
||||
if (err) {
|
||||
pr_err("Failed to request the usb otg reset gpio\n");
|
||||
return err;
|
||||
}
|
||||
|
||||
err = gpio_direction_output(OTG_RESET, 1/*HIGH*/);
|
||||
if (err) {
|
||||
pr_err("Failed to reset the usb otg phy\n");
|
||||
goto otg_free_reset;
|
||||
}
|
||||
|
||||
gpio_set_value(OTG_RESET, 0/*LOW*/);
|
||||
mdelay(5);
|
||||
gpio_set_value(OTG_RESET, 1/*HIGH*/);
|
||||
|
||||
return 0;
|
||||
|
||||
otg_free_reset:
|
||||
gpio_free(OTG_RESET);
|
||||
return err;
|
||||
}
|
||||
|
||||
static int usbh2_init(struct platform_device *pdev)
|
||||
{
|
||||
int err;
|
||||
|
||||
mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
|
||||
mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
|
||||
|
||||
mxc_iomux_set_gpr(MUX_PGP_UH2, true);
|
||||
|
||||
|
||||
/* Enable the chip */
|
||||
err = gpio_request(USBH2_CS, "USB-H2-CS");
|
||||
if (err) {
|
||||
pr_err("Failed to request the usb host 2 CS gpio\n");
|
||||
return err;
|
||||
}
|
||||
|
||||
err = gpio_direction_output(USBH2_CS, 0/*Enabled*/);
|
||||
if (err) {
|
||||
pr_err("Failed to drive the usb host 2 CS gpio\n");
|
||||
goto h2_free_cs;
|
||||
}
|
||||
|
||||
/* H2 phy reset*/
|
||||
err = gpio_request(USBH2_RESET, "USB-H2-RESET");
|
||||
if (err) {
|
||||
pr_err("Failed to request the usb host 2 reset gpio\n");
|
||||
goto h2_free_cs;
|
||||
}
|
||||
|
||||
err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/);
|
||||
if (err) {
|
||||
pr_err("Failed to reset the usb host 2 phy\n");
|
||||
goto h2_free_reset;
|
||||
}
|
||||
|
||||
gpio_set_value(USBH2_RESET, 0/*LOW*/);
|
||||
mdelay(5);
|
||||
gpio_set_value(USBH2_RESET, 1/*HIGH*/);
|
||||
|
||||
return 0;
|
||||
|
||||
h2_free_reset:
|
||||
gpio_free(USBH2_RESET);
|
||||
h2_free_cs:
|
||||
gpio_free(USBH2_CS);
|
||||
return err;
|
||||
}
|
||||
|
||||
static struct mxc_usbh_platform_data usbotg_pdata = {
|
||||
.init = usbotg_init,
|
||||
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
|
||||
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
|
||||
};
|
||||
|
||||
static struct mxc_usbh_platform_data usbh2_pdata = {
|
||||
.init = usbh2_init,
|
||||
.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
|
||||
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
|
||||
};
|
||||
#endif /* CONFIG_USB_ULPI */
|
||||
|
||||
/* RTC over I2C*/
|
||||
#define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4)
|
||||
|
||||
|
|
@ -393,6 +548,17 @@ static void __init armadillo5x0_init(void)
|
|||
if (armadillo5x0_i2c_rtc.irq == 0)
|
||||
pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
|
||||
i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
|
||||
|
||||
/* USB */
|
||||
#if defined(CONFIG_USB_ULPI)
|
||||
usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
|
||||
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
|
||||
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
|
||||
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
|
||||
|
||||
mxc_register_device(&mxc_otg_host, &usbotg_pdata);
|
||||
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
|
||||
#endif
|
||||
}
|
||||
|
||||
static void __init armadillo5x0_timer_init(void)
|
||||
|
|
|
|||
Loading…
Reference in New Issue