[media] doc-rst: add documentation for si4713
Convert it to ReST and add it to the media/v4l-drivers book. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
This commit is contained in:
parent
b4a41387be
commit
b299357065
|
@ -1,11 +1,16 @@
|
|||
Driver for I2C radios for the Silicon Labs Si4713 FM Radio Transmitters
|
||||
.. include:: <isonum.txt>
|
||||
|
||||
The Silicon Labs Si4713 FM Radio Transmitter Driver
|
||||
===================================================
|
||||
|
||||
Copyright |copy| 2009 Nokia Corporation
|
||||
|
||||
Copyright (c) 2009 Nokia Corporation
|
||||
Contact: Eduardo Valentin <eduardo.valentin@nokia.com>
|
||||
|
||||
|
||||
Information about the Device
|
||||
============================
|
||||
----------------------------
|
||||
|
||||
This chip is a Silicon Labs product. It is a I2C device, currently on 0x63 address.
|
||||
Basically, it has transmission and signal noise level measurement features.
|
||||
|
||||
|
@ -19,7 +24,8 @@ properties which can change the behavior of this chip.
|
|||
Users must comply with local regulations on radio frequency (RF) transmission.
|
||||
|
||||
Device driver description
|
||||
=========================
|
||||
-------------------------
|
||||
|
||||
There are two modules to handle this device. One is a I2C device driver
|
||||
and the other is a platform driver.
|
||||
|
||||
|
@ -37,140 +43,148 @@ etc. But mostly of its properties will be present in the extended controls.
|
|||
When the v4l2 mute property is set to 1 (true), the driver will turn the chip off.
|
||||
|
||||
Properties description
|
||||
======================
|
||||
----------------------
|
||||
|
||||
The properties can be accessed using v4l2 extended controls.
|
||||
Here is an output from v4l2-ctl util:
|
||||
/ # v4l2-ctl -d /dev/radio0 --all -L
|
||||
Driver Info:
|
||||
Driver name : radio-si4713
|
||||
Card type : Silicon Labs Si4713 Modulator
|
||||
Bus info :
|
||||
Driver version: 0
|
||||
Capabilities : 0x00080800
|
||||
RDS Output
|
||||
Modulator
|
||||
Audio output: 0 (FM Modulator Audio Out)
|
||||
Frequency: 1408000 (88.000000 MHz)
|
||||
Video Standard = 0x00000000
|
||||
Modulator:
|
||||
Name : FM Modulator
|
||||
Capabilities : 62.5 Hz stereo rds
|
||||
Frequency range : 76.0 MHz - 108.0 MHz
|
||||
Subchannel modulation: stereo+rds
|
||||
|
||||
User Controls
|
||||
.. code-block:: none
|
||||
|
||||
mute (bool) : default=1 value=0
|
||||
/ # v4l2-ctl -d /dev/radio0 --all -L
|
||||
Driver Info:
|
||||
Driver name : radio-si4713
|
||||
Card type : Silicon Labs Si4713 Modulator
|
||||
Bus info :
|
||||
Driver version: 0
|
||||
Capabilities : 0x00080800
|
||||
RDS Output
|
||||
Modulator
|
||||
Audio output: 0 (FM Modulator Audio Out)
|
||||
Frequency: 1408000 (88.000000 MHz)
|
||||
Video Standard = 0x00000000
|
||||
Modulator:
|
||||
Name : FM Modulator
|
||||
Capabilities : 62.5 Hz stereo rds
|
||||
Frequency range : 76.0 MHz - 108.0 MHz
|
||||
Subchannel modulation: stereo+rds
|
||||
|
||||
FM Radio Modulator Controls
|
||||
User Controls
|
||||
|
||||
rds_signal_deviation (int) : min=0 max=90000 step=10 default=200 value=200 flags=slider
|
||||
rds_program_id (int) : min=0 max=65535 step=1 default=0 value=0
|
||||
rds_program_type (int) : min=0 max=31 step=1 default=0 value=0
|
||||
rds_ps_name (str) : min=0 max=96 step=8 value='si4713 '
|
||||
rds_radio_text (str) : min=0 max=384 step=32 value=''
|
||||
audio_limiter_feature_enabled (bool) : default=1 value=1
|
||||
audio_limiter_release_time (int) : min=250 max=102390 step=50 default=5010 value=5010 flags=slider
|
||||
audio_limiter_deviation (int) : min=0 max=90000 step=10 default=66250 value=66250 flags=slider
|
||||
audio_compression_feature_enabl (bool) : default=1 value=1
|
||||
audio_compression_gain (int) : min=0 max=20 step=1 default=15 value=15 flags=slider
|
||||
audio_compression_threshold (int) : min=-40 max=0 step=1 default=-40 value=-40 flags=slider
|
||||
audio_compression_attack_time (int) : min=0 max=5000 step=500 default=0 value=0 flags=slider
|
||||
audio_compression_release_time (int) : min=100000 max=1000000 step=100000 default=1000000 value=1000000 flags=slider
|
||||
pilot_tone_feature_enabled (bool) : default=1 value=1
|
||||
pilot_tone_deviation (int) : min=0 max=90000 step=10 default=6750 value=6750 flags=slider
|
||||
pilot_tone_frequency (int) : min=0 max=19000 step=1 default=19000 value=19000 flags=slider
|
||||
pre_emphasis_settings (menu) : min=0 max=2 default=1 value=1
|
||||
tune_power_level (int) : min=0 max=120 step=1 default=88 value=88 flags=slider
|
||||
tune_antenna_capacitor (int) : min=0 max=191 step=1 default=0 value=110 flags=slider
|
||||
/ #
|
||||
mute (bool) : default=1 value=0
|
||||
|
||||
FM Radio Modulator Controls
|
||||
|
||||
rds_signal_deviation (int) : min=0 max=90000 step=10 default=200 value=200 flags=slider
|
||||
rds_program_id (int) : min=0 max=65535 step=1 default=0 value=0
|
||||
rds_program_type (int) : min=0 max=31 step=1 default=0 value=0
|
||||
rds_ps_name (str) : min=0 max=96 step=8 value='si4713 '
|
||||
rds_radio_text (str) : min=0 max=384 step=32 value=''
|
||||
audio_limiter_feature_enabled (bool) : default=1 value=1
|
||||
audio_limiter_release_time (int) : min=250 max=102390 step=50 default=5010 value=5010 flags=slider
|
||||
audio_limiter_deviation (int) : min=0 max=90000 step=10 default=66250 value=66250 flags=slider
|
||||
audio_compression_feature_enabl (bool) : default=1 value=1
|
||||
audio_compression_gain (int) : min=0 max=20 step=1 default=15 value=15 flags=slider
|
||||
audio_compression_threshold (int) : min=-40 max=0 step=1 default=-40 value=-40 flags=slider
|
||||
audio_compression_attack_time (int) : min=0 max=5000 step=500 default=0 value=0 flags=slider
|
||||
audio_compression_release_time (int) : min=100000 max=1000000 step=100000 default=1000000 value=1000000 flags=slider
|
||||
pilot_tone_feature_enabled (bool) : default=1 value=1
|
||||
pilot_tone_deviation (int) : min=0 max=90000 step=10 default=6750 value=6750 flags=slider
|
||||
pilot_tone_frequency (int) : min=0 max=19000 step=1 default=19000 value=19000 flags=slider
|
||||
pre_emphasis_settings (menu) : min=0 max=2 default=1 value=1
|
||||
tune_power_level (int) : min=0 max=120 step=1 default=88 value=88 flags=slider
|
||||
tune_antenna_capacitor (int) : min=0 max=191 step=1 default=0 value=110 flags=slider
|
||||
|
||||
Here is a summary of them:
|
||||
|
||||
* Pilot is an audible tone sent by the device.
|
||||
|
||||
pilot_frequency - Configures the frequency of the stereo pilot tone.
|
||||
pilot_deviation - Configures pilot tone frequency deviation level.
|
||||
pilot_enabled - Enables or disables the pilot tone feature.
|
||||
- pilot_frequency - Configures the frequency of the stereo pilot tone.
|
||||
- pilot_deviation - Configures pilot tone frequency deviation level.
|
||||
- pilot_enabled - Enables or disables the pilot tone feature.
|
||||
|
||||
* The si4713 device is capable of applying audio compression to the transmitted signal.
|
||||
* The si4713 device is capable of applying audio compression to the
|
||||
transmitted signal.
|
||||
|
||||
acomp_enabled - Enables or disables the audio dynamic range control feature.
|
||||
acomp_gain - Sets the gain for audio dynamic range control.
|
||||
acomp_threshold - Sets the threshold level for audio dynamic range control.
|
||||
acomp_attack_time - Sets the attack time for audio dynamic range control.
|
||||
acomp_release_time - Sets the release time for audio dynamic range control.
|
||||
- acomp_enabled - Enables or disables the audio dynamic range control feature.
|
||||
- acomp_gain - Sets the gain for audio dynamic range control.
|
||||
- acomp_threshold - Sets the threshold level for audio dynamic range control.
|
||||
- acomp_attack_time - Sets the attack time for audio dynamic range control.
|
||||
- acomp_release_time - Sets the release time for audio dynamic range control.
|
||||
|
||||
* Limiter setups audio deviation limiter feature. Once a over deviation occurs,
|
||||
it is possible to adjust the front-end gain of the audio input and always
|
||||
prevent over deviation.
|
||||
it is possible to adjust the front-end gain of the audio input and always
|
||||
prevent over deviation.
|
||||
|
||||
limiter_enabled - Enables or disables the limiter feature.
|
||||
limiter_deviation - Configures audio frequency deviation level.
|
||||
limiter_release_time - Sets the limiter release time.
|
||||
- limiter_enabled - Enables or disables the limiter feature.
|
||||
- limiter_deviation - Configures audio frequency deviation level.
|
||||
- limiter_release_time - Sets the limiter release time.
|
||||
|
||||
* Tuning power
|
||||
|
||||
power_level - Sets the output power level for signal transmission.
|
||||
antenna_capacitor - This selects the value of antenna tuning capacitor manually
|
||||
or automatically if set to zero.
|
||||
- power_level - Sets the output power level for signal transmission.
|
||||
antenna_capacitor - This selects the value of antenna tuning capacitor
|
||||
manually or automatically if set to zero.
|
||||
|
||||
* RDS related
|
||||
|
||||
rds_ps_name - Sets the RDS ps name field for transmission.
|
||||
rds_radio_text - Sets the RDS radio text for transmission.
|
||||
rds_pi - Sets the RDS PI field for transmission.
|
||||
rds_pty - Sets the RDS PTY field for transmission.
|
||||
- rds_ps_name - Sets the RDS ps name field for transmission.
|
||||
- rds_radio_text - Sets the RDS radio text for transmission.
|
||||
- rds_pi - Sets the RDS PI field for transmission.
|
||||
- rds_pty - Sets the RDS PTY field for transmission.
|
||||
|
||||
* Region related
|
||||
|
||||
preemphasis - sets the preemphasis to be applied for transmission.
|
||||
- preemphasis - sets the preemphasis to be applied for transmission.
|
||||
|
||||
RNL
|
||||
===
|
||||
---
|
||||
|
||||
This device also has an interface to measure received noise level. To do that, you should
|
||||
ioctl the device node. Here is an code of example:
|
||||
|
||||
int main (int argc, char *argv[])
|
||||
{
|
||||
struct si4713_rnl rnl;
|
||||
int fd = open("/dev/radio0", O_RDWR);
|
||||
int rval;
|
||||
.. code-block:: none
|
||||
|
||||
if (argc < 2)
|
||||
return -EINVAL;
|
||||
int main (int argc, char *argv[])
|
||||
{
|
||||
struct si4713_rnl rnl;
|
||||
int fd = open("/dev/radio0", O_RDWR);
|
||||
int rval;
|
||||
|
||||
if (fd < 0)
|
||||
return fd;
|
||||
if (argc < 2)
|
||||
return -EINVAL;
|
||||
|
||||
sscanf(argv[1], "%d", &rnl.frequency);
|
||||
if (fd < 0)
|
||||
return fd;
|
||||
|
||||
rval = ioctl(fd, SI4713_IOC_MEASURE_RNL, &rnl);
|
||||
if (rval < 0)
|
||||
return rval;
|
||||
sscanf(argv[1], "%d", &rnl.frequency);
|
||||
|
||||
printf("received noise level: %d\n", rnl.rnl);
|
||||
rval = ioctl(fd, SI4713_IOC_MEASURE_RNL, &rnl);
|
||||
if (rval < 0)
|
||||
return rval;
|
||||
|
||||
close(fd);
|
||||
}
|
||||
printf("received noise level: %d\n", rnl.rnl);
|
||||
|
||||
close(fd);
|
||||
}
|
||||
|
||||
The struct si4713_rnl and SI4713_IOC_MEASURE_RNL are defined under
|
||||
include/linux/platform_data/media/si4713.h.
|
||||
|
||||
Stereo/Mono and RDS subchannels
|
||||
===============================
|
||||
-------------------------------
|
||||
|
||||
The device can also be configured using the available sub channels for
|
||||
transmission. To do that use S/G_MODULATOR ioctl and configure txsubchans properly.
|
||||
Refer to the V4L2 API specification for proper use of this ioctl.
|
||||
|
||||
Testing
|
||||
=======
|
||||
-------
|
||||
Testing is usually done with v4l2-ctl utility for managing FM tuner cards.
|
||||
The tool can be found in v4l-dvb repository under v4l2-apps/util directory.
|
||||
|
||||
Example for setting rds ps name:
|
||||
# v4l2-ctl -d /dev/radio0 --set-ctrl=rds_ps_name="Dummy"
|
||||
|
||||
.. code-block:: none
|
||||
|
||||
# v4l2-ctl -d /dev/radio0 --set-ctrl=rds_ps_name="Dummy"
|
||||
|
||||
|
|
Loading…
Reference in New Issue