hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

mac80211: Optimize scans on current operating channel. 

This should decrease un-necessary flushes, on/off channel work,
and channel changes in cases where the only scanned channel is
the current operating channel.

* Removes SCAN_OFF_CHANNEL flag, uses SDATA_STATE_OFFCHANNEL
  and is-scanning flags instead.

* Add helper method to determine if we are currently configured
  for the operating channel.

* Do no blindly go off/on channel in work.c  Instead, only call
  appropriate on/off code when we really need to change channels.
  Always enable offchannel-ps mode when starting work,
  and disable it when we are done.

* Consolidate ieee80211_offchannel_stop_station and
  ieee80211_offchannel_stop_beaconing, call it
  ieee80211_offchannel_stop_vifs instead.

* Accept non-beacon frames when scanning on operating channel.

* Scan state machine optimized to minimize on/off channel
  transitions.  Also, when going on-channel, go ahead and
  re-enable beaconing.  We're going to be there for 200ms,
  so seems like some useful beaconing could happen.
  Always enable offchannel-ps mode when starting software
  scan, and disable it when we are done.

* Grab local->mtx earlier in __ieee80211_scan_completed_finish
  so that we are protected when calling hw_config(), etc.

* Pass probe-responses up the stack if scanning on local
  channel, so that mlme can take a look.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Ben Greear 2011-02-04 11:54:17 -08:00 committed by John W. Linville
parent cb8d61de2d
commit b23b025fe2
7 changed files with 233 additions and 108 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
net/mac80211/ieee80211_i.h
View File

@ -655,8 +655,6 @@ struct tpt_led_trigger {
* well be on the operating channel
* @SCAN_HW_SCANNING: The hardware is scanning for us, we have no way to
* determine if we are on the operating channel or not
* @SCAN_OFF_CHANNEL: We're off our operating channel for scanning,
* gets only set in conjunction with SCAN_SW_SCANNING
* @SCAN_COMPLETED: Set for our scan work function when the driver reported
* that the scan completed.
* @SCAN_ABORTED: Set for our scan work function when the driver reported
@ -665,7 +663,6 @@ struct tpt_led_trigger {
enum {
SCAN_SW_SCANNING,
SCAN_HW_SCANNING,
SCAN_OFF_CHANNEL,
SCAN_COMPLETED,
SCAN_ABORTED,
};
@ -1148,10 +1145,14 @@ void ieee80211_rx_bss_put(struct ieee80211_local *local,
struct ieee80211_bss *bss);
/* off-channel helpers */
void ieee80211_offchannel_stop_beaconing(struct ieee80211_local *local);
void ieee80211_offchannel_stop_station(struct ieee80211_local *local);
bool ieee80211_cfg_on_oper_channel(struct ieee80211_local *local);
void ieee80211_offchannel_enable_all_ps(struct ieee80211_local *local,
bool tell_ap);
void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local,
bool offchannel_ps_enable);
void ieee80211_offchannel_return(struct ieee80211_local *local,
bool enable_beaconing);
bool enable_beaconing,
bool offchannel_ps_disable);
void ieee80211_hw_roc_setup(struct ieee80211_local *local);
/* interface handling */

53
net/mac80211/main.c
View File

@ -98,6 +98,41 @@ static void ieee80211_reconfig_filter(struct work_struct *work)
ieee80211_configure_filter(local);
}
/*
* Returns true if we are logically configured to be on
* the operating channel AND the hardware-conf is currently
* configured on the operating channel. Compares channel-type
* as well.
*/
bool ieee80211_cfg_on_oper_channel(struct ieee80211_local *local)
{
struct ieee80211_channel *chan, *scan_chan;
enum nl80211_channel_type channel_type;
/* This logic needs to match logic in ieee80211_hw_config */
if (local->scan_channel) {
chan = local->scan_channel;
channel_type = NL80211_CHAN_NO_HT;
} else if (local->tmp_channel) {
chan = scan_chan = local->tmp_channel;
channel_type = local->tmp_channel_type;
} else {
chan = local->oper_channel;
channel_type = local->_oper_channel_type;
}
if (chan != local->oper_channel ||
channel_type != local->_oper_channel_type)
return false;
/* Check current hardware-config against oper_channel. */
if ((local->oper_channel != local->hw.conf.channel) ||
(local->_oper_channel_type != local->hw.conf.channel_type))
return false;
return true;
}
int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
{
struct ieee80211_channel *chan, *scan_chan;
@ -110,21 +145,27 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed)
scan_chan = local->scan_channel;
/* If this off-channel logic ever changes, ieee80211_on_oper_channel
* may need to change as well.
*/
offchannel_flag = local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
if (scan_chan) {
chan = scan_chan;
channel_type = NL80211_CHAN_NO_HT;
local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
} else if (local->tmp_channel &&
local->oper_channel != local->tmp_channel) {
} else if (local->tmp_channel) {
chan = scan_chan = local->tmp_channel;
channel_type = local->tmp_channel_type;
local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
} else {
chan = local->oper_channel;
channel_type = local->_oper_channel_type;
local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL;
}
if (chan != local->oper_channel ||
channel_type != local->_oper_channel_type)
local->hw.conf.flags |= IEEE80211_CONF_OFFCHANNEL;
else
local->hw.conf.flags &= ~IEEE80211_CONF_OFFCHANNEL;
offchannel_flag ^= local->hw.conf.flags & IEEE80211_CONF_OFFCHANNEL;
if (offchannel_flag || chan != local->hw.conf.channel ||
@ -231,7 +272,7 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata,
if (changed & BSS_CHANGED_BEACON_ENABLED) {
if (local->quiescing || !ieee80211_sdata_running(sdata) ||
test_bit(SCAN_SW_SCANNING, &local->scanning)) {
test_bit(SDATA_STATE_OFFCHANNEL, &sdata->state)) {
sdata->vif.bss_conf.enable_beacon = false;
} else {
/*

98
net/mac80211/offchannel.c
View File

@ -17,10 +17,14 @@
#include "driver-trace.h"
/*
* inform AP that we will go to sleep so that it will buffer the frames
* while we scan
* Tell our hardware to disable PS.
* Optionally inform AP that we will go to sleep so that it will buffer
* the frames while we are doing off-channel work. This is optional
* because we *may* be doing work on-operating channel, and want our
* hardware unconditionally awake, but still let the AP send us normal frames.
*/
static void ieee80211_offchannel_ps_enable(struct ieee80211_sub_if_data *sdata)
static void ieee80211_offchannel_ps_enable(struct ieee80211_sub_if_data *sdata,
bool tell_ap)
{
struct ieee80211_local *local = sdata->local;
struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
@ -41,8 +45,8 @@ static void ieee80211_offchannel_ps_enable(struct ieee80211_sub_if_data *sdata)
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
}
if (!(local->offchannel_ps_enabled) ||
!(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK))
if (tell_ap && (!local->offchannel_ps_enabled ||
!(local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)))
/*
* If power save was enabled, no need to send a nullfunc
* frame because AP knows that we are sleeping. But if the
@ -77,6 +81,9 @@ static void ieee80211_offchannel_ps_disable(struct ieee80211_sub_if_data *sdata)
* we are sleeping, let's just enable power save mode in
* hardware.
*/
/* TODO: Only set hardware if CONF_PS changed?
* TODO: Should we set offchannel_ps_enabled to false?
*/
local->hw.conf.flags |= IEEE80211_CONF_PS;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
} else if (local->hw.conf.dynamic_ps_timeout > 0) {
@ -95,63 +102,61 @@ static void ieee80211_offchannel_ps_disable(struct ieee80211_sub_if_data *sdata)
ieee80211_sta_reset_conn_monitor(sdata);
}
void ieee80211_offchannel_stop_beaconing(struct ieee80211_local *local)
{
struct ieee80211_sub_if_data *sdata;
mutex_lock(&local->iflist_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
if (!ieee80211_sdata_running(sdata))
continue;
/* disable beaconing */
if (sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_ADHOC ||
sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
ieee80211_bss_info_change_notify(
sdata, BSS_CHANGED_BEACON_ENABLED);
/*
* only handle non-STA interfaces here, STA interfaces
* are handled in ieee80211_offchannel_stop_station(),
* e.g., from the background scan state machine.
*
* In addition, do not stop monitor interface to allow it to be
* used from user space controlled off-channel operations.
*/
if (sdata->vif.type != NL80211_IFTYPE_STATION &&
sdata->vif.type != NL80211_IFTYPE_MONITOR) {
set_bit(SDATA_STATE_OFFCHANNEL, &sdata->state);
netif_tx_stop_all_queues(sdata->dev);
}
}
mutex_unlock(&local->iflist_mtx);
}
void ieee80211_offchannel_stop_station(struct ieee80211_local *local)
void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local,
bool offchannel_ps_enable)
{
struct ieee80211_sub_if_data *sdata;
/*
* notify the AP about us leaving the channel and stop all STA interfaces
* notify the AP about us leaving the channel and stop all
* STA interfaces.
*/
mutex_lock(&local->iflist_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
if (!ieee80211_sdata_running(sdata))
continue;
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
if (sdata->vif.type != NL80211_IFTYPE_MONITOR)
set_bit(SDATA_STATE_OFFCHANNEL, &sdata->state);
/* Check to see if we should disable beaconing. */
if (sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_ADHOC ||
sdata->vif.type == NL80211_IFTYPE_MESH_POINT)
ieee80211_bss_info_change_notify(
sdata, BSS_CHANGED_BEACON_ENABLED);
if (sdata->vif.type != NL80211_IFTYPE_MONITOR) {
netif_tx_stop_all_queues(sdata->dev);
if (sdata->u.mgd.associated)
ieee80211_offchannel_ps_enable(sdata);
if (offchannel_ps_enable &&
(sdata->vif.type == NL80211_IFTYPE_STATION) &&
sdata->u.mgd.associated)
ieee80211_offchannel_ps_enable(sdata, true);
}
}
mutex_unlock(&local->iflist_mtx);
}
void ieee80211_offchannel_enable_all_ps(struct ieee80211_local *local,
bool tell_ap)
{
struct ieee80211_sub_if_data *sdata;
mutex_lock(&local->iflist_mtx);
list_for_each_entry(sdata, &local->interfaces, list) {
if (!ieee80211_sdata_running(sdata))
continue;
if (sdata->vif.type == NL80211_IFTYPE_STATION &&
sdata->u.mgd.associated)
ieee80211_offchannel_ps_enable(sdata, tell_ap);
}
mutex_unlock(&local->iflist_mtx);
}
void ieee80211_offchannel_return(struct ieee80211_local *local,
bool enable_beaconing)
bool enable_beaconing,
bool offchannel_ps_disable)
{
struct ieee80211_sub_if_data *sdata;
@ -161,7 +166,8 @@ void ieee80211_offchannel_return(struct ieee80211_local *local,
continue;
/* Tell AP we're back */
if (sdata->vif.type == NL80211_IFTYPE_STATION) {
if (offchannel_ps_disable &&
sdata->vif.type == NL80211_IFTYPE_STATION) {
if (sdata->u.mgd.associated)
ieee80211_offchannel_ps_disable(sdata);
}
@ -181,7 +187,7 @@ void ieee80211_offchannel_return(struct ieee80211_local *local,
netif_tx_wake_all_queues(sdata->dev);
}
/* re-enable beaconing */
/* Check to see if we should re-enable beaconing */
if (enable_beaconing &&
(sdata->vif.type == NL80211_IFTYPE_AP ||
sdata->vif.type == NL80211_IFTYPE_ADHOC ||

12
net/mac80211/rx.c
View File

@ -409,16 +409,10 @@ ieee80211_rx_h_passive_scan(struct ieee80211_rx_data *rx)
if (likely(!(status->rx_flags & IEEE80211_RX_IN_SCAN)))
return RX_CONTINUE;
if (test_bit(SCAN_HW_SCANNING, &local->scanning))
if (test_bit(SCAN_HW_SCANNING, &local->scanning) ||
test_bit(SCAN_SW_SCANNING, &local->scanning))
return ieee80211_scan_rx(rx->sdata, skb);
if (test_bit(SCAN_SW_SCANNING, &local->scanning)) {
/* drop all the other packets during a software scan anyway */
if (ieee80211_scan_rx(rx->sdata, skb) != RX_QUEUED)
dev_kfree_skb(skb);
return RX_QUEUED;
}
/* scanning finished during invoking of handlers */
I802_DEBUG_INC(local->rx_handlers_drop_passive_scan);
return RX_DROP_UNUSABLE;
@ -2793,7 +2787,7 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
local->dot11ReceivedFragmentCount++;
if (unlikely(test_bit(SCAN_HW_SCANNING, &local->scanning) ||
test_bit(SCAN_OFF_CHANNEL, &local->scanning)))
test_bit(SCAN_SW_SCANNING, &local->scanning)))
status->rx_flags |= IEEE80211_RX_IN_SCAN;
if (ieee80211_is_mgmt(fc))

96
net/mac80211/scan.c
View File

@ -212,6 +212,14 @@ ieee80211_scan_rx(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb)
if (bss)
ieee80211_rx_bss_put(sdata->local, bss);
/* If we are on-operating-channel, and this packet is for the
* current channel, pass the pkt on up the stack so that
* the rest of the stack can make use of it.
*/
if (ieee80211_cfg_on_oper_channel(sdata->local)
&& (channel == sdata->local->oper_channel))
return RX_CONTINUE;
dev_kfree_skb(skb);
return RX_QUEUED;
}
@ -293,15 +301,31 @@ static void __ieee80211_scan_completed_finish(struct ieee80211_hw *hw,
bool was_hw_scan)
{
struct ieee80211_local *local = hw_to_local(hw);
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
if (!was_hw_scan) {
ieee80211_configure_filter(local);
drv_sw_scan_complete(local);
ieee80211_offchannel_return(local, true);
}
bool on_oper_chan;
bool enable_beacons = false;
mutex_lock(&local->mtx);
on_oper_chan = ieee80211_cfg_on_oper_channel(local);
if (was_hw_scan || !on_oper_chan) {
if (WARN_ON(local->scan_channel))
local->scan_channel = NULL;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
}
if (!was_hw_scan) {
bool on_oper_chan2;
ieee80211_configure_filter(local);
drv_sw_scan_complete(local);
on_oper_chan2 = ieee80211_cfg_on_oper_channel(local);
/* We should always be on-channel at this point. */
WARN_ON(!on_oper_chan2);
if (on_oper_chan2 && (on_oper_chan != on_oper_chan2))
enable_beacons = true;
ieee80211_offchannel_return(local, enable_beacons, true);
}
ieee80211_recalc_idle(local);
mutex_unlock(&local->mtx);
@ -341,13 +365,15 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local)
*/
drv_sw_scan_start(local);
ieee80211_offchannel_stop_beaconing(local);
local->leave_oper_channel_time = 0;
local->next_scan_state = SCAN_DECISION;
local->scan_channel_idx = 0;
drv_flush(local, false);
/* We always want to use off-channel PS, even if we
* are not really leaving oper-channel. Don't
* tell the AP though, as long as we are on-channel.
*/
ieee80211_offchannel_enable_all_ps(local, false);
ieee80211_configure_filter(local);
@ -487,7 +513,21 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local,
}
mutex_unlock(&local->iflist_mtx);
if (local->scan_channel) {
next_chan = local->scan_req->channels[local->scan_channel_idx];
if (ieee80211_cfg_on_oper_channel(local)) {
/* We're currently on operating channel. */
if ((next_chan == local->oper_channel) &&
(local->_oper_channel_type == NL80211_CHAN_NO_HT))
/* We don't need to move off of operating channel. */
local->next_scan_state = SCAN_SET_CHANNEL;
else
/*
* We do need to leave operating channel, as next
* scan is somewhere else.
*/
local->next_scan_state = SCAN_LEAVE_OPER_CHANNEL;
} else {
/*
* we're currently scanning a different channel, let's
* see if we can scan another channel without interfering
@ -503,7 +543,6 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local,
*
* Otherwise switch back to the operating channel.
*/
next_chan = local->scan_req->channels[local->scan_channel_idx];
bad_latency = time_after(jiffies +
ieee80211_scan_get_channel_time(next_chan),
@ -521,12 +560,6 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local,
local->next_scan_state = SCAN_ENTER_OPER_CHANNEL;
else
local->next_scan_state = SCAN_SET_CHANNEL;
} else {
/*
* we're on the operating channel currently, let's
* leave that channel now to scan another one
*/
local->next_scan_state = SCAN_LEAVE_OPER_CHANNEL;
}
*next_delay = 0;
@ -535,9 +568,10 @@ static void ieee80211_scan_state_decision(struct ieee80211_local *local,
static void ieee80211_scan_state_leave_oper_channel(struct ieee80211_local *local,
unsigned long *next_delay)
{
ieee80211_offchannel_stop_station(local);
__set_bit(SCAN_OFF_CHANNEL, &local->scanning);
/* PS will already be in off-channel mode,
* we do that once at the beginning of scanning.
*/
ieee80211_offchannel_stop_vifs(local, false);
/*
* What if the nullfunc frames didn't arrive?
@ -560,15 +594,15 @@ static void ieee80211_scan_state_enter_oper_channel(struct ieee80211_local *loca
{
/* switch back to the operating channel */
local->scan_channel = NULL;
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
if (!ieee80211_cfg_on_oper_channel(local))
ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL);
/*
* Only re-enable station mode interface now; beaconing will be
* re-enabled once the full scan has been completed.
* Re-enable vifs and beaconing. Leave PS
* in off-channel state..will put that back
* on-channel at the end of scanning.
*/
ieee80211_offchannel_return(local, false);
__clear_bit(SCAN_OFF_CHANNEL, &local->scanning);
ieee80211_offchannel_return(local, true, false);
*next_delay = HZ / 5;
local->next_scan_state = SCAN_DECISION;
@ -584,8 +618,12 @@ static void ieee80211_scan_state_set_channel(struct ieee80211_local *local,
chan = local->scan_req->channels[local->scan_channel_idx];
local->scan_channel = chan;
if (ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL))
skip = 1;
/* Only call hw-config if we really need to change channels. */
if ((chan != local->hw.conf.channel) ||
(local->hw.conf.channel_type != NL80211_CHAN_NO_HT))
if (ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL))
skip = 1;
/* advance state machine to next channel/band */
local->scan_channel_idx++;

3
net/mac80211/tx.c
View File

@ -257,7 +257,8 @@ ieee80211_tx_h_check_assoc(struct ieee80211_tx_data *tx)
if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED))
return TX_CONTINUE;
if (unlikely(test_bit(SCAN_OFF_CHANNEL, &tx->local->scanning)) &&
if (unlikely(test_bit(SCAN_SW_SCANNING, &tx->local->scanning)) &&
test_bit(SDATA_STATE_OFFCHANNEL, &tx->sdata->state) &&
!ieee80211_is_probe_req(hdr->frame_control) &&
!ieee80211_is_nullfunc(hdr->frame_control))
/*

66
net/mac80211/work.c
View File

@ -924,18 +924,44 @@ static void ieee80211_work_work(struct work_struct *work)
}
if (!started && !local->tmp_channel) {
/*
* TODO: could optimize this by leaving the
* station vifs in awake mode if they
* happen to be on the same channel as
* the requested channel
*/
ieee80211_offchannel_stop_beaconing(local);
ieee80211_offchannel_stop_station(local);
bool on_oper_chan;
bool tmp_chan_changed = false;
bool on_oper_chan2;
on_oper_chan = ieee80211_cfg_on_oper_channel(local);
if (local->tmp_channel)
if ((local->tmp_channel != wk->chan) ||
(local->tmp_channel_type != wk->chan_type))
tmp_chan_changed = true;
local->tmp_channel = wk->chan;
local->tmp_channel_type = wk->chan_type;
ieee80211_hw_config(local, 0);
/*
* Leave the station vifs in awake mode if they
* happen to be on the same channel as
* the requested channel.
*/
on_oper_chan2 = ieee80211_cfg_on_oper_channel(local);
if (on_oper_chan != on_oper_chan2) {
if (on_oper_chan2) {
/* going off oper channel, PS too */
ieee80211_offchannel_stop_vifs(local,
true);
ieee80211_hw_config(local, 0);
} else {
/* going on channel, but leave PS
* off-channel. */
ieee80211_hw_config(local, 0);
ieee80211_offchannel_return(local,
true,
false);
}
} else if (tmp_chan_changed)
/* Still off-channel, but on some other
* channel, so update hardware.
* PS should already be off-channel.
*/
ieee80211_hw_config(local, 0);
started = true;
wk->timeout = jiffies;
}
@ -1011,9 +1037,27 @@ static void ieee80211_work_work(struct work_struct *work)
}
if (!remain_off_channel && local->tmp_channel) {
bool on_oper_chan = ieee80211_cfg_on_oper_channel(local);
local->tmp_channel = NULL;
ieee80211_hw_config(local, 0);
ieee80211_offchannel_return(local, true);
/* If tmp_channel wasn't operating channel, then
* we need to go back on-channel.
* NOTE: If we can ever be here while scannning,
* or if the hw_config() channel config logic changes,
* then we may need to do a more thorough check to see if
* we still need to do a hardware config. Currently,
* we cannot be here while scanning, however.
*/
if (ieee80211_cfg_on_oper_channel(local) && !on_oper_chan)
ieee80211_hw_config(local, 0);
/* At the least, we need to disable offchannel_ps,
* so just go ahead and run the entire offchannel
* return logic here. We *could* skip enabling
* beaconing if we were already on-oper-channel
* as a future optimization.
*/
ieee80211_offchannel_return(local, true, true);
/* give connection some time to breathe */
run_again(local, jiffies + HZ/2);
}