hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

net: ethernet: mediatek: fix flow control settings on GMAC0 is not being enabled properly 

Commit 08ef55c6f2
("net-next: mediatek: fix gigabit and flow control advertisement")
had supported proper flow control settings for GMAC1. But for GMAC0,

1.GMAC0 shares the common logic with GMAC1 inside mtk_phy_link_adjust()
to adapt various settings for the target phy.

2.GMAC0 uses fixed-phy to connect to a builtin gigabit switch with
fixed link speed as commit 0c72c50f6f
("net-next: mediatek: add fixed-phy support") describes.

3.However, fixed-phy doesn't enable SUPPORTED_Pause & SUPPORTED_Asym_Pause
supported flag on default that would cause mtk_phy_link_adjust() not to
enable flow control setting on GMAC0 properly and cause packet dropped
when high traffic.

Due to these reasons, the patch adds SUPPORTED_Pause & SUPPORTED_Asym_Pause
supported flags on fixed-phy used by the driver to have proper handling on
the both GMAC with the shared common logic.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
sean.wang@mediatek.com 2016-08-16 13:55:14 +08:00 committed by David S. Miller
parent 8ca7f4fe07
commit b2025c7cc9
1 changed files with 5 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
drivers/net/ethernet/mediatek/mtk_eth_soc.c
View File

@ -267,6 +267,11 @@ static int mtk_phy_connect(struct mtk_mac *mac)
mac->phy_dev->autoneg = AUTONEG_ENABLE;
mac->phy_dev->speed = 0;
mac->phy_dev->duplex = 0;
if (of_phy_is_fixed_link(mac->of_node))
mac->phy_dev->supported |=
SUPPORTED_Pause | SUPPORTED_Asym_Pause;
mac->phy_dev->supported &= PHY_GBIT_FEATURES | SUPPORTED_Pause |
SUPPORTED_Asym_Pause;
mac->phy_dev->advertising = mac->phy_dev->supported |