diff --git a/drivers/staging/wilc1000/sdio.c b/drivers/staging/wilc1000/sdio.c
index 0670c5956aef..2301e90c21ca 100644
--- a/drivers/staging/wilc1000/sdio.c
+++ b/drivers/staging/wilc1000/sdio.c
@@ -686,13 +686,16 @@ static int wilc_sdio_init(struct wilc *wilc, bool resume)
 	 *      make sure can read back chip id correctly
 	 **/
 	if (!resume) {
-		ret = wilc_sdio_read_reg(wilc, 0x1000, &chipid);
+		int rev;
+
+		ret = wilc_sdio_read_reg(wilc, WILC_CHIPID, &chipid);
 		if (ret) {
 			dev_err(&func->dev, "Fail cmd read chip id...\n");
 			return ret;
 		}
 		dev_err(&func->dev, "chipid (%08x)\n", chipid);
-		if ((chipid & 0xfff) > 0x2a0)
+		rev = FIELD_GET(WILC_CHIP_REV_FIELD, chipid);
+		if (rev > FIELD_GET(WILC_CHIP_REV_FIELD, WILC_1000_BASE_ID_2A))
 			sdio_priv->has_thrpt_enh3 = 1;
 		else
 			sdio_priv->has_thrpt_enh3 = 0;
diff --git a/drivers/staging/wilc1000/spi.c b/drivers/staging/wilc1000/spi.c
index 37be627e72ce..44f7d48851b5 100644
--- a/drivers/staging/wilc1000/spi.c
+++ b/drivers/staging/wilc1000/spi.c
@@ -683,7 +683,7 @@ static int wilc_spi_read_reg(struct wilc *wilc, u32 addr, u32 *data)
 	u8 cmd = CMD_SINGLE_READ;
 	u8 clockless = 0;
 
-	if (addr < 0x30) {
+	if (addr < WILC_SPI_CLOCKLESS_ADDR_LIMIT) {
 		/* Clockless register */
 		cmd = CMD_INTERNAL_READ;
 		clockless = 1;
@@ -760,7 +760,7 @@ static int wilc_spi_write_reg(struct wilc *wilc, u32 addr, u32 data)
 	u8 cmd = CMD_SINGLE_WRITE;
 	u8 clockless = 0;
 
-	if (addr < 0x30) {
+	if (addr < WILC_SPI_CLOCKLESS_ADDR_LIMIT) {
 		/* Clockless register */
 		cmd = CMD_INTERNAL_WRITE;
 		clockless = 1;
@@ -829,7 +829,7 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
 	int ret;
 
 	if (isinit) {
-		ret = wilc_spi_read_reg(wilc, 0x1000, &chipid);
+		ret = wilc_spi_read_reg(wilc, WILC_CHIPID, &chipid);
 		if (ret)
 			dev_err(&spi->dev, "Fail cmd read chip id...\n");
 
@@ -881,7 +881,7 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
 	/*
 	 * make sure can read back chip id correctly
 	 */
-	ret = wilc_spi_read_reg(wilc, 0x1000, &chipid);
+	ret = wilc_spi_read_reg(wilc, WILC_CHIPID, &chipid);
 	if (ret) {
 		dev_err(&spi->dev, "Fail cmd read chip id...\n");
 		return ret;
@@ -896,7 +896,8 @@ static int wilc_spi_read_size(struct wilc *wilc, u32 *size)
 {
 	int ret;
 
-	ret = spi_internal_read(wilc, 0xe840 - WILC_SPI_REG_BASE, size);
+	ret = spi_internal_read(wilc,
+				WILC_SPI_INT_STATUS - WILC_SPI_REG_BASE, size);
 	*size = FIELD_GET(IRQ_DMA_WD_CNT_MASK, *size);
 
 	return ret;
@@ -904,12 +905,14 @@ static int wilc_spi_read_size(struct wilc *wilc, u32 *size)
 
 static int wilc_spi_read_int(struct wilc *wilc, u32 *int_status)
 {
-	return spi_internal_read(wilc, 0xe840 - WILC_SPI_REG_BASE, int_status);
+	return spi_internal_read(wilc, WILC_SPI_INT_STATUS - WILC_SPI_REG_BASE,
+				 int_status);
 }
 
 static int wilc_spi_clear_int_ext(struct wilc *wilc, u32 val)
 {
-	return spi_internal_write(wilc, 0xe844 - WILC_SPI_REG_BASE, val);
+	return spi_internal_write(wilc, WILC_SPI_INT_CLEAR - WILC_SPI_REG_BASE,
+				  val);
 }
 
 static int wilc_spi_sync_ext(struct wilc *wilc, int nint)
diff --git a/drivers/staging/wilc1000/wlan.c b/drivers/staging/wilc1000/wlan.c
index 31f424efe01d..f633c6b9f0a9 100644
--- a/drivers/staging/wilc1000/wlan.c
+++ b/drivers/staging/wilc1000/wlan.c
@@ -11,7 +11,7 @@
 
 static inline bool is_wilc1000(u32 id)
 {
-	return (id & 0xfffff000) == 0x100000;
+	return (id & (~WILC_CHIP_REV_FIELD)) == WILC_1000_BASE_ID;
 }
 
 static inline void acquire_bus(struct wilc *wilc, enum bus_acquire acquire)
@@ -393,10 +393,11 @@ void chip_allow_sleep(struct wilc *wilc)
 {
 	u32 reg = 0;
 
-	wilc->hif_func->hif_read_reg(wilc, 0xf0, &reg);
+	wilc->hif_func->hif_read_reg(wilc, WILC_SDIO_WAKEUP_REG, &reg);
 
-	wilc->hif_func->hif_write_reg(wilc, 0xf0, reg & ~BIT(0));
-	wilc->hif_func->hif_write_reg(wilc, 0xfa, 0);
+	wilc->hif_func->hif_write_reg(wilc, WILC_SDIO_WAKEUP_REG,
+				      reg & ~WILC_SDIO_WAKEUP_BIT);
+	wilc->hif_func->hif_write_reg(wilc, WILC_SDIO_HOST_TO_FW_REG, 0);
 }
 EXPORT_SYMBOL_GPL(chip_allow_sleep);
 
@@ -407,9 +408,11 @@ void chip_wakeup(struct wilc *wilc)
 
 	if (wilc->io_type == WILC_HIF_SPI) {
 		do {
-			h->hif_read_reg(wilc, 1, &reg);
-			h->hif_write_reg(wilc, 1, reg | BIT(1));
-			h->hif_write_reg(wilc, 1, reg & ~BIT(1));
+			h->hif_read_reg(wilc, WILC_SPI_WAKEUP_REG, &reg);
+			h->hif_write_reg(wilc, WILC_SPI_WAKEUP_REG,
+					 reg | WILC_SPI_WAKEUP_BIT);
+			h->hif_write_reg(wilc, WILC_SPI_WAKEUP_REG,
+					 reg & ~WILC_SPI_WAKEUP_BIT);
 
 			do {
 				usleep_range(2000, 2500);
@@ -417,35 +420,40 @@ void chip_wakeup(struct wilc *wilc)
 			} while (wilc_get_chipid(wilc, true) == 0);
 		} while (wilc_get_chipid(wilc, true) == 0);
 	} else if (wilc->io_type == WILC_HIF_SDIO) {
-		h->hif_write_reg(wilc, 0xfa, 1);
+		h->hif_write_reg(wilc, WILC_SDIO_HOST_TO_FW_REG,
+				 WILC_SDIO_HOST_TO_FW_BIT);
 		usleep_range(200, 400);
-		h->hif_read_reg(wilc, 0xf0, &reg);
+		h->hif_read_reg(wilc, WILC_SDIO_WAKEUP_REG, &reg);
 		do {
-			h->hif_write_reg(wilc, 0xf0, reg | BIT(0));
-			h->hif_read_reg(wilc, 0xf1, &clk_status_reg);
+			h->hif_write_reg(wilc, WILC_SDIO_WAKEUP_REG,
+					 reg | WILC_SDIO_WAKEUP_BIT);
+			h->hif_read_reg(wilc, WILC_SDIO_CLK_STATUS_REG,
+					&clk_status_reg);
 
-			while ((clk_status_reg & 0x1) == 0) {
+			while (!(clk_status_reg & WILC_SDIO_CLK_STATUS_BIT)) {
 				usleep_range(2000, 2500);
 
-				h->hif_read_reg(wilc, 0xf1, &clk_status_reg);
+				h->hif_read_reg(wilc, WILC_SDIO_CLK_STATUS_REG,
+						&clk_status_reg);
 			}
-			if ((clk_status_reg & 0x1) == 0) {
-				h->hif_write_reg(wilc, 0xf0, reg & (~BIT(0)));
+			if (!(clk_status_reg & WILC_SDIO_CLK_STATUS_BIT)) {
+				h->hif_write_reg(wilc, WILC_SDIO_WAKEUP_REG,
+						 reg & ~WILC_SDIO_WAKEUP_BIT);
 			}
-		} while ((clk_status_reg & 0x1) == 0);
+		} while (!(clk_status_reg & WILC_SDIO_CLK_STATUS_BIT));
 	}
 
 	if (wilc->chip_ps_state == WILC_CHIP_SLEEPING_MANUAL) {
-		if (wilc_get_chipid(wilc, false) < 0x1002b0) {
+		if (wilc_get_chipid(wilc, false) < WILC_1000_BASE_ID_2B) {
 			u32 val32;
 
-			h->hif_read_reg(wilc, 0x1e1c, &val32);
+			h->hif_read_reg(wilc, WILC_REG_4_TO_1_RX, &val32);
 			val32 |= BIT(6);
-			h->hif_write_reg(wilc, 0x1e1c, val32);
+			h->hif_write_reg(wilc, WILC_REG_4_TO_1_RX, val32);
 
-			h->hif_read_reg(wilc, 0x1e9c, &val32);
+			h->hif_read_reg(wilc, WILC_REG_4_TO_1_TX_BANK0, &val32);
 			val32 |= BIT(6);
-			h->hif_write_reg(wilc, 0x1e9c, val32);
+			h->hif_write_reg(wilc, WILC_REG_4_TO_1_TX_BANK0, val32);
 		}
 	}
 	wilc->chip_ps_state = WILC_CHIP_WAKEDUP;
@@ -455,7 +463,7 @@ EXPORT_SYMBOL_GPL(chip_wakeup);
 void host_wakeup_notify(struct wilc *wilc)
 {
 	acquire_bus(wilc, WILC_BUS_ACQUIRE_ONLY);
-	wilc->hif_func->hif_write_reg(wilc, 0x10b0, 1);
+	wilc->hif_func->hif_write_reg(wilc, WILC_CORTUS_INTERRUPT_2, 1);
 	release_bus(wilc, WILC_BUS_RELEASE_ONLY);
 }
 EXPORT_SYMBOL_GPL(host_wakeup_notify);
@@ -463,7 +471,7 @@ EXPORT_SYMBOL_GPL(host_wakeup_notify);
 void host_sleep_notify(struct wilc *wilc)
 {
 	acquire_bus(wilc, WILC_BUS_ACQUIRE_ONLY);
-	wilc->hif_func->hif_write_reg(wilc, 0x10ac, 1);
+	wilc->hif_func->hif_write_reg(wilc, WILC_CORTUS_INTERRUPT_1, 1);
 	release_bus(wilc, WILC_BUS_RELEASE_ONLY);
 }
 EXPORT_SYMBOL_GPL(host_sleep_notify);
@@ -884,7 +892,7 @@ int wilc_wlan_start(struct wilc *wilc)
 
 	wilc->hif_func->hif_sync_ext(wilc, NUM_INT_EXT);
 
-	ret = wilc->hif_func->hif_read_reg(wilc, 0x1000, &chipid);
+	ret = wilc->hif_func->hif_read_reg(wilc, WILC_CHIPID, &chipid);
 	if (ret) {
 		release_bus(wilc, WILC_BUS_RELEASE_ONLY);
 		return ret;
@@ -1125,18 +1133,24 @@ static int init_chip(struct net_device *dev)
 	chipid = wilc_get_chipid(wilc, true);
 
 	if ((chipid & 0xfff) != 0xa0) {
-		ret = wilc->hif_func->hif_read_reg(wilc, 0x1118, &reg);
+		ret = wilc->hif_func->hif_read_reg(wilc,
+						   WILC_CORTUS_RESET_MUX_SEL,
+						   &reg);
 		if (ret) {
 			netdev_err(dev, "fail read reg 0x1118\n");
 			goto release;
 		}
 		reg |= BIT(0);
-		ret = wilc->hif_func->hif_write_reg(wilc, 0x1118, reg);
+		ret = wilc->hif_func->hif_write_reg(wilc,
+						    WILC_CORTUS_RESET_MUX_SEL,
+						    reg);
 		if (ret) {
 			netdev_err(dev, "fail write reg 0x1118\n");
 			goto release;
 		}
-		ret = wilc->hif_func->hif_write_reg(wilc, 0xc0000, 0x71);
+		ret = wilc->hif_func->hif_write_reg(wilc,
+						    WILC_CORTUS_BOOT_REGISTER,
+						    WILC_CORTUS_BOOT_FROM_IRAM);
 		if (ret) {
 			netdev_err(dev, "fail write reg 0xc0000\n");
 			goto release;
@@ -1156,20 +1170,21 @@ u32 wilc_get_chipid(struct wilc *wilc, bool update)
 	u32 rfrevid = 0;
 
 	if (chipid == 0 || update) {
-		wilc->hif_func->hif_read_reg(wilc, 0x1000, &tempchipid);
-		wilc->hif_func->hif_read_reg(wilc, 0x13f4, &rfrevid);
+		wilc->hif_func->hif_read_reg(wilc, WILC_CHIPID, &tempchipid);
+		wilc->hif_func->hif_read_reg(wilc, WILC_RF_REVISION_ID,
+					     &rfrevid);
 		if (!is_wilc1000(tempchipid)) {
 			chipid = 0;
 			return chipid;
 		}
-		if (tempchipid == 0x1002a0) {
+		if (tempchipid == WILC_1000_BASE_ID_2A) { /* 0x1002A0 */
 			if (rfrevid != 0x1)
-				tempchipid = 0x1002a1;
-		} else if (tempchipid == 0x1002b0) {
+				tempchipid = WILC_1000_BASE_ID_2A_REV1;
+		} else if (tempchipid == WILC_1000_BASE_ID_2B) { /* 0x1002B0 */
 			if (rfrevid == 0x4)
-				tempchipid = 0x1002b1;
+				tempchipid = WILC_1000_BASE_ID_2B_REV1;
 			else if (rfrevid != 0x3)
-				tempchipid = 0x1002b2;
+				tempchipid = WILC_1000_BASE_ID_2B_REV2;
 		}
 
 		chipid = tempchipid;
diff --git a/drivers/staging/wilc1000/wlan.h b/drivers/staging/wilc1000/wlan.h
index ceec4801f18f..5999c5490ea5 100644
--- a/drivers/staging/wilc1000/wlan.h
+++ b/drivers/staging/wilc1000/wlan.h
@@ -66,6 +66,8 @@
 #define WILC_INTR_CLEAR			(WILC_INTR_REG_BASE + 0x30)
 #define WILC_INTR_STATUS		(WILC_INTR_REG_BASE + 0x40)
 
+#define WILC_RF_REVISION_ID		0x13f4
+
 #define WILC_VMM_TBL_SIZE		64
 #define WILC_VMM_TX_TBL_BASE		0x150400
 #define WILC_VMM_RX_TBL_BASE		0x150500
@@ -89,10 +91,17 @@
 #define WILC_SPI_TX_MODE		(WILC_SPI_REG_BASE + 0x20)
 #define WILC_SPI_PROTOCOL_CONFIG	(WILC_SPI_REG_BASE + 0x24)
 #define WILC_SPI_INTR_CTL		(WILC_SPI_REG_BASE + 0x2c)
+#define WILC_SPI_INT_STATUS		(WILC_SPI_REG_BASE + 0x40)
+#define WILC_SPI_INT_CLEAR		(WILC_SPI_REG_BASE + 0x44)
+
+#define WILC_SPI_WAKEUP_REG		0x1
+#define WILC_SPI_WAKEUP_BIT		BIT(1)
 
 #define WILC_SPI_PROTOCOL_OFFSET	(WILC_SPI_PROTOCOL_CONFIG - \
 					 WILC_SPI_REG_BASE)
 
+#define WILC_SPI_CLOCKLESS_ADDR_LIMIT	0x30
+
 /* Functions IO enables bits */
 #define WILC_SDIO_CCCR_IO_EN_FUNC1	BIT(1)
 
@@ -149,6 +158,32 @@
 #define WILC_HAVE_DISABLE_WILC_UART	BIT(7)
 #define WILC_HAVE_USE_IRQ_AS_HOST_WAKE	BIT(8)
 
+#define WILC_CORTUS_INTERRUPT_BASE	0x10A8
+#define WILC_CORTUS_INTERRUPT_1		(WILC_CORTUS_INTERRUPT_BASE + 0x4)
+#define WILC_CORTUS_INTERRUPT_2		(WILC_CORTUS_INTERRUPT_BASE + 0x8)
+
+/* tx control register 1 to 4 for RX */
+#define WILC_REG_4_TO_1_RX		0x1e1c
+
+/* tx control register 1 to 4 for TX Bank_0 */
+#define WILC_REG_4_TO_1_TX_BANK0	0x1e9c
+
+#define WILC_CORTUS_RESET_MUX_SEL	0x1118
+#define WILC_CORTUS_BOOT_REGISTER	0xc0000
+
+#define WILC_CORTUS_BOOT_FROM_IRAM	0x71
+
+#define WILC_1000_BASE_ID		0x100000
+
+#define WILC_1000_BASE_ID_2A		0x1002A0
+#define WILC_1000_BASE_ID_2A_REV1	(WILC_1000_BASE_ID_2A + 1)
+
+#define WILC_1000_BASE_ID_2B		0x1002B0
+#define WILC_1000_BASE_ID_2B_REV1	(WILC_1000_BASE_ID_2B + 1)
+#define WILC_1000_BASE_ID_2B_REV2	(WILC_1000_BASE_ID_2B + 2)
+
+#define WILC_CHIP_REV_FIELD		GENMASK(11, 0)
+
 /********************************************
  *
  *      Wlan Defines