hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Omap dts changes for v4.3 merge window. There are also related 

changes for reemoteproc platform_data and audio options for
 omap2plus_defconfig to keep audio working when changing boards
 to use SIMPLE_CARD. The summary of changes is:
 
 - A large set of audio related changes for SIMPLE_CARD from
   Peter Ujfalusi <peter.ujfalusi@ti.com> for am335x and am437x
 
 - Pinctrl dts defines for dra7 virtual mode to configure timings
 
 - Change to use cpsw slave0 for dra7 Ethernet
 
 - Remove unconfigured and wrong l3-mux entry for dm816x
 
 - Add support for Gumstix Palo35 and TobiDuo boards, and  Overo
   PoP NAND and McBSP2
 
 - Start using new HDMI binding for tilcdc
 
 - Start using new sDMA crossbar for dra7
 
 - Start using rproc for am335x and am437x M3 coprocessor
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJVpj6yAAoJEBvUPslcq6VzfckP/AvU56IuA4wHlnHgLGtXprhb
 etGAW40xAzWlBF+fZcIUkKnRmncJ59j5s9Ou9D47q0PvDobRDiqYsZUg7M4qd1SX
 DhiALUhZS1q5+JvW5CCUhz3kKsQ1iSicJE+0lSOmlHNfXK0r8DO868M6+TQqVHlW
 0B5bo9cKDjWxF19wQfUv1Q3PtYcTXZI/oDFGH3zD2PhPZQLkTGs9h2rhrmqqpcuj
 OH6qRUOQmpCVTjrcp1aqODn8qy3laivSH5TUyqsuYt7uPVIwPNtZFNLSCLHSs4o2
 N8EgOV/R09+4u4JRIXra1ooawJp+izSt6057180UZfkdnkV/qX9dYshs4v95QN1U
 iiv2fFTtSvlwHKAFn27LKS1crDtcNKDmlGePOnYufCfcRl+Zy6t48o49LBS7Xyoq
 nafdLpqSRhhjkNNwgSNaBLHbZS6alRnTQIDykLlVTkIcMXF13AN5yOZs2gqT5+HQ
 SLohf5PAb1u4iGRW+4vF5jGFKAANZEdpOMSxy1BVOKRsE712C81hTzgN1/z28IW5
 REB1OHMnguf78fIqnhPYl9ml69Q358YtLtHQacqzCxA8QpHn/dEe+F6CyJINCl53
 qJwg8UpEUQRheJJJTGlZ1tSpy7gnn89ZPx0QVQZPYYvO/fWA9C6Vq6RJ5PNTy69Q
 q7uHoCL0bETCNK0BiUEH
 =sPfQ
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.3/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Merge "omap dts changes for v4.3, part 1" from Tony Lindgren:

Omap dts changes for v4.3 merge window. There are also related
changes for reemoteproc platform_data and audio options for
omap2plus_defconfig to keep audio working when changing boards
to use SIMPLE_CARD. The summary of changes is:

- A large set of audio related changes for SIMPLE_CARD from
  Peter Ujfalusi <peter.ujfalusi@ti.com> for am335x and am437x

- Pinctrl dts defines for dra7 virtual mode to configure timings

- Change to use cpsw slave0 for dra7 Ethernet

- Remove unconfigured and wrong l3-mux entry for dm816x

- Add support for Gumstix Palo35 and TobiDuo boards, and  Overo
  PoP NAND and McBSP2

- Start using new HDMI binding for tilcdc

- Start using new sDMA crossbar for dra7

- Start using rproc for am335x and am437x M3 coprocessor

* tag 'omap-for-v4.3/dt-pt1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (32 commits)
  ARM: dts: am335x-evm: Switch using simple-audio-card for audio support
  ARM: dts: am335x-evm: Add sleep pin settings for mcasp1
  ARM: dts: am335x-evm: Rename pinctrl section for McASP1
  ARM: dts: am335x-evm: Fix mcasp1 node's indentation
  ARM: dts: am335x-evmsk: Switch using simple-audio-card for audio support
  ARM: dts: am335x-evmsk: Add sleep pin settings for mcasp1
  ARM: dts: am335x-evmsk: Fix mcasp1 node's indentation
  ARM: dts: am437x-gp-evm: Enable analog audio via simple-card
  ARM: dts: am437x-gp-evm: McASP1 node for audio support
  ARM: dts: am437x-gp-evm: Add node for tlv320aic3106 audio codec
  ARM: dts: am437x-gp-evm: Rename fixed regulator vmmcsd_fixed to evm_v3_3d
  ARM: dts: am437x-gp-evm: Add gpio-hog for configuring the display/audio mux
  ARM: dts: am43xx-epos-evm: Enable analog audio via simple-card
  ARM: dts: am43xx-epos-evm: Add node for tlv320aic3111 audio codec
  ARM: dts: am43xx-epos-evm: McASP1 node for audio support
  ARM: dts: am43xx-epos-evm: Add regulator for VBAT and DCDC4 of tps65218
  ARM: dts: am43xx-epos-evm: Add gpio-hog for configuring the display/audio mux
  ARM: dts: am437x-sk-evm: Switch using simple-audio-card for audio support
  ARM: dts: am437x-sk-evm: Add sleep pin settings for mcasp1
  ARM: omap2plus_defconfig: Enable audio related config options
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
This commit is contained in:
Olof Johansson 2015-07-15 10:17:14 -04:00
parent 216883a420 80edaaead3
commit b1d725ee58
24 changed files with 745 additions and 122 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
arch/arm/boot/dts/Makefile
View File

@ -409,15 +409,19 @@ dtb-$(CONFIG_ARCH_OMAP3) += \
omap3-overo-alto35.dtb \
omap3-overo-chestnut43.dtb \
omap3-overo-gallop43.dtb \
omap3-overo-palo35.dtb \
omap3-overo-palo43.dtb \
omap3-overo-storm-alto35.dtb \
omap3-overo-storm-chestnut43.dtb \
omap3-overo-storm-gallop43.dtb \
omap3-overo-storm-palo35.dtb \
omap3-overo-storm-palo43.dtb \
omap3-overo-storm-summit.dtb \
omap3-overo-storm-tobi.dtb \
omap3-overo-storm-tobiduo.dtb \
omap3-overo-summit.dtb \
omap3-overo-tobi.dtb \
omap3-overo-tobiduo.dtb \
omap3-pandora-600mhz.dtb \
omap3-pandora-1ghz.dtb \
omap3-sbc-t3517.dtb \

20
arch/arm/boot/dts/am335x-boneblack.dts
View File

@ -68,16 +68,26 @@
&lcdc {
status = "okay";
port {
lcdc_0: endpoint@0 {
remote-endpoint = <&hdmi_0>;
};
};
};
/ {
hdmi {
compatible = "ti,tilcdc,slave";
i2c = <&i2c0>;
&i2c0 {
tda19988 {
compatible = "nxp,tda998x";
reg = <0x70>;
pinctrl-names = "default", "off";
pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
status = "okay";
port {
hdmi_0: endpoint@0 {
remote-endpoint = <&lcdc_0>;
};
};
};
};

69
arch/arm/boot/dts/am335x-evm.dts
View File

@ -136,16 +136,29 @@
};
sound {
compatible = "ti,da830-evm-audio";
ti,model = "AM335x-EVM";
ti,audio-codec = <&tlv320aic3106>;
ti,mcasp-controller = <&mcasp1>;
ti,codec-clock-rate = <12000000>;
ti,audio-routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT",
"LINE1L", "Line In",
"LINE1R", "Line In";
compatible = "simple-audio-card";
simple-audio-card,name = "AM335x-EVM";
simple-audio-card,widgets =
"Headphone", "Headphone Jack",
"Line", "Line In";
simple-audio-card,routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT",
"LINE1L", "Line In",
"LINE1R", "Line In";
simple-audio-card,format = "dsp_b";
simple-audio-card,bitclock-master = <&sound_master>;
simple-audio-card,frame-master = <&sound_master>;
simple-audio-card,bitclock-inversion;
simple-audio-card,cpu {
sound-dai = <&mcasp1>;
};
sound_master: simple-audio-card,codec {
sound-dai = <&tlv320aic3106>;
system-clock-frequency = <12000000>;
};
};
};
@ -342,7 +355,7 @@
>;
};
am335x_evm_audio_pins: am335x_evm_audio_pins {
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
@ -351,6 +364,15 @@
>;
};
mcasp1_pins_sleep: mcasp1_pins_sleep {
pinctrl-single,pins = <
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
@ -460,6 +482,7 @@
};
tlv320aic3106: tlv320aic3106@1b {
#sound-dai-cells = <0>;
compatible = "ti,tlv320aic3106";
reg = <0x1b>;
status = "okay";
@ -575,19 +598,21 @@
#include "tps65910.dtsi"
&mcasp1 {
pinctrl-names = "default";
pinctrl-0 = <&am335x_evm_audio_pins>;
#sound-dai-cells = <0>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp1_pins>;
pinctrl-1 = <&mcasp1_pins_sleep>;
status = "okay";
status = "okay";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
/* 4 serializers */
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
>;
tx-num-evt = <32>;
rx-num-evt = <32>;
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
/* 4 serializers */
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&tps {

62
arch/arm/boot/dts/am335x-evmsk.dts
View File

@ -141,14 +141,26 @@
};
sound {
compatible = "ti,da830-evm-audio";
ti,model = "AM335x-EVMSK";
ti,audio-codec = <&tlv320aic3106>;
ti,mcasp-controller = <&mcasp1>;
ti,codec-clock-rate = <24000000>;
ti,audio-routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT";
compatible = "simple-audio-card";
simple-audio-card,name = "AM335x-EVMSK";
simple-audio-card,widgets =
"Headphone", "Headphone Jack";
simple-audio-card,routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT";
simple-audio-card,format = "dsp_b";
simple-audio-card,bitclock-master = <&sound_master>;
simple-audio-card,frame-master = <&sound_master>;
simple-audio-card,bitclock-inversion;
simple-audio-card,cpu {
sound-dai = <&mcasp1>;
};
sound_master: simple-audio-card,codec {
sound-dai = <&tlv320aic3106>;
system-clock-frequency = <24000000>;
};
};
panel {
@ -396,6 +408,15 @@
>;
};
mcasp1_pins_sleep: mcasp1_pins_sleep {
pinctrl-single,pins = <
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
@ -462,6 +483,7 @@
};
tlv320aic3106: tlv320aic3106@1b {
#sound-dai-cells = <0>;
compatible = "ti,tlv320aic3106";
reg = <0x1b>;
status = "okay";
@ -661,19 +683,21 @@
};
&mcasp1 {
pinctrl-names = "default";
pinctrl-0 = <&mcasp1_pins>;
#sound-dai-cells = <0>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp1_pins>;
pinctrl-1 = <&mcasp1_pins_sleep>;
status = "okay";
status = "okay";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
/* 4 serializers */
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
>;
tx-num-evt = <32>;
rx-num-evt = <32>;
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
/* 4 serializers */
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};
&tscadc {

17
arch/arm/boot/dts/am33xx.dtsi
View File

@ -103,6 +103,15 @@
#size-cells = <1>;
ranges = <0 0x44c00000 0x280000>;
wkup_m3: wkup_m3@100000 {
compatible = "ti,am3352-wkup-m3";
reg = <0x100000 0x4000>,
<0x180000 0x2000>;
reg-names = "umem", "dmem";
ti,hwmods = "wkup_m3";
ti,pm-firmware = "am335x-pm-firmware.elf";
};
prcm: prcm@200000 {
compatible = "ti,am3-prcm";
reg = <0x200000 0x4000>;
@ -762,14 +771,6 @@
reg = <0x40300000 0x10000>; /* 64k */
};
wkup_m3: wkup_m3@44d00000 {
compatible = "ti,am3353-wkup-m3";
reg = <0x44d00000 0x4000 /* M3 UMEM */
0x44d80000 0x2000>; /* M3 DMEM */
ti,hwmods = "wkup_m3";
ti,no-reset-on-init;
};
elm: elm@48080000 {
compatible = "ti,am3352-elm";
reg = <0x48080000 0x2000>;

9
arch/arm/boot/dts/am4372.dtsi
View File

@ -83,6 +83,15 @@
#size-cells = <1>;
ranges = <0 0x44c00000 0x287000>;
wkup_m3: wkup_m3@100000 {
compatible = "ti,am4372-wkup-m3";
reg = <0x100000 0x4000>,
<0x180000 0x2000>;
reg-names = "umem", "dmem";
ti,hwmods = "wkup_m3";
ti,pm-firmware = "am335x-pm-firmware.elf";
};
prcm: prcm@1f0000 {
compatible = "ti,am4-prcm";
reg = <0x1f0000 0x11000>;

108
arch/arm/boot/dts/am437x-gp-evm.dts
View File

@ -24,9 +24,9 @@
serial3 = &uart3;
};
vmmcsd_fixed: fixedregulator-sd {
evm_v3_3d: fixedregulator-v3_3d {
compatible = "regulator-fixed";
regulator-name = "vmmcsd_fixed";
regulator-name = "evm_v3_3d";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
@ -83,17 +83,6 @@
compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
label = "lcd";
pinctrl-names = "default";
pinctrl-0 = <&lcd_pins>;
/*
* SelLCDorHDMI, LOW to select HDMI. This is not really the
* panel's enable GPIO, but we don't have HDMI driver support nor
* support to switch between two displays, so using this gpio as
* panel's enable should be safe.
*/
enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>;
panel-timing {
clock-frequency = <33000000>;
hactive = <800>;
@ -124,6 +113,32 @@
clock-frequency = <12000000>;
};
sound0: sound@0 {
compatible = "simple-audio-card";
simple-audio-card,name = "AM437x-GP-EVM";
simple-audio-card,widgets =
"Headphone", "Headphone Jack",
"Line", "Line In";
simple-audio-card,routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT",
"LINE1L", "Line In",
"LINE1R", "Line In";
simple-audio-card,format = "dsp_b";
simple-audio-card,bitclock-master = <&sound0_master>;
simple-audio-card,frame-master = <&sound0_master>;
simple-audio-card,bitclock-inversion;
simple-audio-card,cpu {
sound-dai = <&mcasp1>;
system-clock-frequency = <12000000>;
};
sound0_master: simple-audio-card,codec {
sound-dai = <&tlv320aic3106>;
system-clock-frequency = <12000000>;
};
};
};
&am43xx_pinmux {
@ -270,7 +285,7 @@
>;
};
lcd_pins: lcd_pins {
display_mux_pins: display_mux_pins {
pinctrl-single,pins = <
/* GPIO 5_8 to select LCD / HDMI */
0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
@ -409,6 +424,24 @@
0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */
>;
};
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>;
};
mcasp1_sleep_pins: mcasp1_sleep_pins {
pinctrl-single,pins = <
0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
};
&i2c0 {
@ -521,6 +554,19 @@
};
};
};
tlv320aic3106: tlv320aic3106@1b {
#sound-dai-cells = <0>;
compatible = "ti,tlv320aic3106";
reg = <0x1b>;
status = "okay";
/* Regulators */
IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */
AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */
DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */
};
};
&epwmss0 {
@ -558,13 +604,27 @@
};
&gpio5 {
pinctrl-names = "default";
pinctrl-0 = <&display_mux_pins>;
status = "okay";
ti,no-reset-on-init;
p8 {
/*
* SelLCDorHDMI selects between display and audio paths:
* Low: HDMI display with audio via HDMI
* High: LCD display with analog audio via aic3111 codec
*/
gpio-hog;
gpios = <8 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "SelLCDorHDMI";
};
};
&mmc1 {
status = "okay";
vmmc-supply = <&vmmcsd_fixed>;
vmmc-supply = <&evm_v3_3d>;
bus-width = <4>;
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
@ -790,3 +850,21 @@
};
};
};
&mcasp1 {
#sound-dai-cells = <0>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp1_pins>;
pinctrl-1 = <&mcasp1_sleep_pins>;
status = "okay";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
/* 4 serializers */
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};

45
arch/arm/boot/dts/am437x-sk-evm.dts
View File

@ -32,14 +32,29 @@
};
sound {
compatible = "ti,da830-evm-audio";
ti,model = "AM437x-SK-EVM";
ti,audio-codec = <&tlv320aic3106>;
ti,mcasp-controller = <&mcasp1>;
ti,codec-clock-rate = <24000000>;
ti,audio-routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT";
compatible = "simple-audio-card";
simple-audio-card,name = "AM437x-SK-EVM";
simple-audio-card,widgets =
"Headphone", "Headphone Jack",
"Line", "Line In";
simple-audio-card,routing =
"Headphone Jack", "HPLOUT",
"Headphone Jack", "HPROUT",
"LINE1L", "Line In",
"LINE1R", "Line In";
simple-audio-card,format = "dsp_b";
simple-audio-card,bitclock-master = <&sound_master>;
simple-audio-card,frame-master = <&sound_master>;
simple-audio-card,bitclock-inversion;
simple-audio-card,cpu {
sound-dai = <&mcasp1>;
};
sound_master: simple-audio-card,codec {
sound-dai = <&tlv320aic3106>;
system-clock-frequency = <24000000>;
};
};
matrix_keypad: matrix_keypad@0 {
@ -364,6 +379,15 @@
>;
};
mcasp1_pins_sleep: mcasp1_pins_sleep {
pinctrl-single,pins = <
0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
lcd_pins: lcd_pins {
pinctrl-single,pins = <
0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */
@ -480,6 +504,7 @@
};
tlv320aic3106: tlv320aic3106@1b {
#sound-dai-cells = <0>;
compatible = "ti,tlv320aic3106";
reg = <0x1b>;
status = "okay";
@ -640,8 +665,10 @@
};
&mcasp1 {
pinctrl-names = "default";
#sound-dai-cells = <0>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp1_pins>;
pinctrl-1 = <&mcasp1_pins_sleep>;
status = "okay";

130
arch/arm/boot/dts/am43x-epos-evm.dts
View File

@ -14,6 +14,7 @@
#include <dt-bindings/pinctrl/am43xx.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pwm/pwm.h>
#include <dt-bindings/sound/tlv320aic31xx-micbias.h>
/ {
model = "TI AM43x EPOS EVM";
@ -31,21 +32,18 @@
enable-active-high;
};
vbat: fixedregulator@0 {
compatible = "regulator-fixed";
regulator-name = "vbat";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-boot-on;
};
lcd0: display {
compatible = "osddisplays,osd057T0559-34ts", "panel-dpi";
label = "lcd";
pinctrl-names = "default";
pinctrl-0 = <&lcd_pins>;
/*
* SelLCDorHDMI, LOW to select HDMI. This is not really the
* panel's enable GPIO, but we don't have HDMI driver support nor
* support to switch between two displays, so using this gpio as
* panel's enable should be safe.
*/
enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
panel-timing {
clock-frequency = <33000000>;
hactive = <800>;
@ -108,6 +106,38 @@
brightness-levels = <0 51 53 56 62 75 101 152 255>;
default-brightness-level = <8>;
};
sound0: sound@0 {
compatible = "simple-audio-card";
simple-audio-card,name = "AM43-EPOS-EVM";
simple-audio-card,widgets =
"Microphone", "Microphone Jack",
"Headphone", "Headphone Jack",
"Speaker", "Speaker";
simple-audio-card,routing =
"MIC1LP", "Microphone Jack",
"MIC1RP", "Microphone Jack",
"MIC1LP", "MICBIAS",
"MIC1RP", "MICBIAS",
"Headphone Jack", "HPL",
"Headphone Jack", "HPR",
"Speaker", "SPL",
"Speaker", "SPR";
simple-audio-card,format = "dsp_b";
simple-audio-card,bitclock-master = <&sound0_master>;
simple-audio-card,frame-master = <&sound0_master>;
simple-audio-card,bitclock-inversion;
simple-audio-card,cpu {
sound-dai = <&mcasp1>;
system-clock-frequency = <12000000>;
};
sound0_master: simple-audio-card,codec {
sound-dai = <&tlv320aic3111>;
system-clock-frequency = <12000000>;
};
};
};
&am43xx_pinmux {
@ -278,7 +308,7 @@
>;
};
lcd_pins: lcd_pins {
display_mux_pins: display_mux_pins {
pinctrl-single,pins = <
/* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */
0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7)
@ -320,6 +350,24 @@
0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7)
>;
};
mcasp1_pins: mcasp1_pins {
pinctrl-single,pins = <
0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */
0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */
0x1a8 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */
0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */
>;
};
mcasp1_sleep_pins: mcasp1_sleep_pins {
pinctrl-single,pins = <
0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
};
&mmc1 {
@ -399,6 +447,15 @@
regulator-always-on;
};
dcdc4: regulator-dcdc4 {
compatible = "ti,tps65218-dcdc4";
regulator-name = "vdcdc4";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
dcdc5: regulator-dcdc5 {
compatible = "ti,tps65218-dcdc5";
regulator-name = "v1_0bat";
@ -441,6 +498,23 @@
touchscreen-size-x = <1024>;
touchscreen-size-y = <600>;
};
tlv320aic3111: tlv320aic3111@18 {
#sound-dai-cells = <0>;
compatible = "ti,tlv320aic3111";
reg = <0x18>;
status = "okay";
ai31xx-micbias-vg = <MICBIAS_2_0V>;
/* Regulators */
HPVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
SPRVDD-supply = <&vbat>; /* vbat */
SPLVDD-supply = <&vbat>; /* vbat */
AVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */
IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */
DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */
};
};
&i2c2 {
@ -458,7 +532,21 @@
};
&gpio2 {
pinctrl-names = "default";
pinctrl-0 = <&display_mux_pins>;
status = "okay";
p1 {
/*
* SelLCDorHDMI selects between display and audio paths:
* Low: HDMI display with audio via HDMI
* High: LCD display with analog audio via aic3111 codec
*/
gpio-hog;
gpios = <1 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "SelLCDorHDMI";
};
};
&gpio3 {
@ -686,3 +774,21 @@
};
};
};
&mcasp1 {
#sound-dai-cells = <0>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&mcasp1_pins>;
pinctrl-1 = <&mcasp1_sleep_pins>;
status = "okay";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
/* 4 serializer */
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
1 2 0 0
>;
tx-num-evt = <32>;
rx-num-evt = <32>;
};

2
arch/arm/boot/dts/dm816x.dtsi
View File

@ -58,7 +58,7 @@
* the whole bus hierarchy.
*/
ocp {
compatible = "ti,omap3-l3-smx", "simple-bus";
compatible = "simple-bus";
reg = <0x44000000 0x10000>;
interrupts = <9 10>;
#address-cells = <1>;

57
arch/arm/boot/dts/dra7.dtsi
View File

@ -308,6 +308,15 @@
dma-requests = <127>;
};
sdma_xbar: dma-router@4a002b78 {
compatible = "ti,dra7-dma-crossbar";
reg = <0x4a002b78 0xfc>;
#dma-cells = <1>;
dma-requests = <205>;
ti,dma-safe-map = <0>;
dma-masters = <&sdma>;
};
gpio1: gpio@4ae10000 {
compatible = "ti,omap4-gpio";
reg = <0x4ae10000 0x200>;
@ -403,7 +412,7 @@
ti,hwmods = "uart1";
clock-frequency = <48000000>;
status = "disabled";
dmas = <&sdma 49>, <&sdma 50>;
dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
dma-names = "tx", "rx";
};
@ -414,7 +423,7 @@
ti,hwmods = "uart2";
clock-frequency = <48000000>;
status = "disabled";
dmas = <&sdma 51>, <&sdma 52>;
dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
dma-names = "tx", "rx";
};
@ -425,7 +434,7 @@
ti,hwmods = "uart3";
clock-frequency = <48000000>;
status = "disabled";
dmas = <&sdma 53>, <&sdma 54>;
dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
dma-names = "tx", "rx";
};
@ -436,7 +445,7 @@
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
dmas = <&sdma 55>, <&sdma 56>;
dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
dma-names = "tx", "rx";
};
@ -447,7 +456,7 @@
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
dmas = <&sdma 63>, <&sdma 64>;
dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
dma-names = "tx", "rx";
};
@ -458,7 +467,7 @@
ti,hwmods = "uart6";
clock-frequency = <48000000>;
status = "disabled";
dmas = <&sdma 79>, <&sdma 80>;
dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
dma-names = "tx", "rx";
};
@ -867,7 +876,7 @@
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
dmas = <&sdma 61>, <&sdma 62>;
dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
dma-names = "tx", "rx";
status = "disabled";
pbias-supply = <&pbias_mmc_reg>;
@ -879,7 +888,7 @@
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
dmas = <&sdma 47>, <&sdma 48>;
dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
dma-names = "tx", "rx";
status = "disabled";
};
@ -890,7 +899,7 @@
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc3";
ti,needs-special-reset;
dmas = <&sdma 77>, <&sdma 78>;
dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
dma-names = "tx", "rx";
status = "disabled";
};
@ -901,7 +910,7 @@
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc4";
ti,needs-special-reset;
dmas = <&sdma 57>, <&sdma 58>;
dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
dma-names = "tx", "rx";
status = "disabled";
};
@ -1046,14 +1055,14 @@
#size-cells = <0>;
ti,hwmods = "mcspi1";
ti,spi-num-cs = <4>;
dmas = <&sdma 35>,
<&sdma 36>,
<&sdma 37>,
<&sdma 38>,
<&sdma 39>,
<&sdma 40>,
<&sdma 41>,
<&sdma 42>;
dmas = <&sdma_xbar 35>,
<&sdma_xbar 36>,
<&sdma_xbar 37>,
<&sdma_xbar 38>,
<&sdma_xbar 39>,
<&sdma_xbar 40>,
<&sdma_xbar 41>,
<&sdma_xbar 42>;
dma-names = "tx0", "rx0", "tx1", "rx1",
"tx2", "rx2", "tx3", "rx3";
status = "disabled";
@ -1067,10 +1076,10 @@
#size-cells = <0>;
ti,hwmods = "mcspi2";
ti,spi-num-cs = <2>;
dmas = <&sdma 43>,
<&sdma 44>,
<&sdma 45>,
<&sdma 46>;
dmas = <&sdma_xbar 43>,
<&sdma_xbar 44>,
<&sdma_xbar 45>,
<&sdma_xbar 46>;
dma-names = "tx0", "rx0", "tx1", "rx1";
status = "disabled";
};
@ -1083,7 +1092,7 @@
#size-cells = <0>;
ti,hwmods = "mcspi3";
ti,spi-num-cs = <2>;
dmas = <&sdma 15>, <&sdma 16>;
dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
dma-names = "tx0", "rx0";
status = "disabled";
};
@ -1096,7 +1105,7 @@
#size-cells = <0>;
ti,hwmods = "mcspi4";
ti,spi-num-cs = <1>;
dmas = <&sdma 70>, <&sdma 71>;
dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
dma-names = "tx0", "rx0";
status = "disabled";
};

10
arch/arm/boot/dts/dra72-evm.dts
View File

@ -343,6 +343,12 @@
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
interrupt-controller;
#interrupt-cells = <2>;
cpsw_sel_s0 {
gpio-hog;
gpios = <4 GPIO_ACTIVE_HIGH>;
output-low;
};
};
};
@ -571,9 +577,10 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&cpsw_default>;
pinctrl-1 = <&cpsw_sleep>;
slaves = <1>;
};
&cpsw_emac1 {
&cpsw_emac0 {
phy_id = <&davinci_mdio>, <3>;
phy-mode = "rgmii";
};
@ -582,7 +589,6 @@
pinctrl-names = "default", "sleep";
pinctrl-0 = <&davinci_mdio_default>;
pinctrl-1 = <&davinci_mdio_sleep>;
active_slave = <1>;
};
&dcan1 {

55
arch/arm/boot/dts/omap3-overo-base.dtsi
View File

@ -218,3 +218,58 @@
pinctrl-0 = <&uart2_pins>;
};
&mcbsp2 {
status = "okay";
};
&gpmc {
ranges = <0 0 0x00000000 0x20000000>;
nand@0,0 {
linux,mtd-name= "micron,mt29c4g96maz";
reg = <0 0 0>;
nand-bus-width = <16>;
gpmc,device-width = <2>;
ti,nand-ecc-opt = "bch8";
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <44>;
gpmc,cs-wr-off-ns = <44>;
gpmc,adv-on-ns = <6>;
gpmc,adv-rd-off-ns = <34>;
gpmc,adv-wr-off-ns = <44>;
gpmc,we-off-ns = <40>;
gpmc,oe-off-ns = <54>;
gpmc,access-ns = <64>;
gpmc,rd-cycle-ns = <82>;
gpmc,wr-cycle-ns = <82>;
gpmc,wr-access-ns = <40>;
gpmc,wr-data-mux-bus-ns = <0>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SPL";
reg = <0 0x80000>; /* 512KiB */
};
partition@80000 {
label = "U-Boot";
reg = <0x80000 0x1C0000>; /* 1792KiB */
};
partition@1c0000 {
label = "Environment";
reg = <0x240000 0x40000>; /* 256KiB */
};
partition@280000 {
label = "Kernel";
reg = <0x280000 0x800000>; /* 8192KiB */
};
partition@780000 {
label = "Filesystem";
reg = <0xA80000 0>;
/* HACK: MTDPART_SIZ_FULL=0 so fill to end */
};
};
};

3
arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi
View File

@ -62,6 +62,7 @@
OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */
OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */
OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */
OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT | MUX_MODE0) /* mcspi1_cs1.mcspi1_cs1 */
>;
};
@ -123,7 +124,7 @@
label = "lcd";
reg = <1>; /* CS1 */
spi-max-frequency = <10000000>;
spi-max-frequency = <500000>;
spi-cpol;
spi-cpha;

53
arch/arm/boot/dts/omap3-overo-palo35-common.dtsi Normal file
View File

@ -0,0 +1,53 @@
/*
* Copyright (C) 2015 Ash Charles, Gumstix Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Palo35 expansion board is manufactured by Gumstix Inc.
*/
#include "omap3-overo-common-peripherals.dtsi"
#include "omap3-overo-common-lcd35.dtsi"
#include <dt-bindings/input/input.h>
/ {
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pins>;
heartbeat {
label = "overo:red:gpio21";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */
linux,default-trigger = "heartbeat";
};
gpio22 {
label = "overo:blue:gpio22";
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */
};
};
gpio_keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&button_pins>;
#address-cells = <1>;
#size-cells = <0>;
button0@23 {
label = "button0";
linux,code = <BTN_0>;
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */
gpio-key,wakeup;
};
button1@14 {
label = "button1";
linux,code = <BTN_1>;
gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */
gpio-key,wakeup;
};
};
};

37
arch/arm/boot/dts/omap3-overo-palo35.dts Normal file
View File

@ -0,0 +1,37 @@
/*
* Copyright (C) 2015 Ash Charles, Gumstix Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Palo35 expansion board is manufactured by Gumstix Inc.
*/
/dts-v1/;
#include "omap3-overo.dtsi"
#include "omap3-overo-palo35-common.dtsi"
/ {
model = "OMAP35xx Gumstix Overo on Palo35";
compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
};
&omap3_pmx_core2 {
led_pins: pinmux_led_pins {
pinctrl-single,pins = <
OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */
>;
};
button_pins: pinmux_button_pins {
pinctrl-single,pins = <
OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */
OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */
>;
};
};

37
arch/arm/boot/dts/omap3-overo-storm-palo35.dts Normal file
View File

@ -0,0 +1,37 @@
/*
* Copyright (C) 2015 Ash Charles, Gumstix, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* Palo35 expansion board is manufactured by Gumstix Inc.
*/
/dts-v1/;
#include "omap3-overo-storm.dtsi"
#include "omap3-overo-palo35-common.dtsi"
/ {
model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35";
compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
};
&omap3_pmx_core2 {
led_pins: pinmux_led_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */
OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */
>;
};
button_pins: pinmux_button_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */
OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */
>;
};
};

21
arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts Normal file
View File

@ -0,0 +1,21 @@
/*
* Copyright (C) 2015 Ash Charles, Gumstix, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* TobiDuo expansion board is manufactured by Gumstix Inc.
*/
/dts-v1/;
#include "omap3-overo-storm.dtsi"
#include "omap3-overo-tobiduo-common.dtsi"
/ {
model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo";
compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
};

65
arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi Normal file
View File

@ -0,0 +1,65 @@
/*
* Copyright (C) 2015 Ash Charles, Gumstix, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* TobiDuo expansion board is manufactured by Gumstix Inc.
*/
#include "omap3-overo-common-peripherals.dtsi"
#include "omap-gpmc-smsc9221.dtsi"
&gpmc {
ranges = <4 0 0x2b000000 0x1000000>, /* CS4 */
<5 0 0x2c000000 0x1000000>; /* CS5 */
smsc1: ethernet@gpmc {
reg = <5 0 0xff>;
interrupt-parent = <&gpio6>;
interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */
};
smsc2: ethernet@4,0 {
compatible = "smsc,lan9221","smsc,lan9115";
bank-width = <2>;
gpmc,mux-add-data;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <42>;
gpmc,cs-wr-off-ns = <36>;
gpmc,adv-on-ns = <6>;
gpmc,adv-rd-off-ns = <12>;
gpmc,adv-wr-off-ns = <12>;
gpmc,oe-on-ns = <0>;
gpmc,oe-off-ns = <42>;
gpmc,we-on-ns = <0>;
gpmc,we-off-ns = <36>;
gpmc,rd-cycle-ns = <60>;
gpmc,wr-cycle-ns = <54>;
gpmc,access-ns = <36>;
gpmc,page-burst-access-ns = <0>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,wr-data-mux-bus-ns = <18>;
gpmc,wr-access-ns = <42>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
vddvario-supply = <&vddvario>;
vdd33a-supply = <&vdd33a>;
reg-io-width = <4>;
smsc,save-mac-address;
reg = <4 0 0xff>;
interrupt-parent = <&gpio3>;
interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* GPIO 65 */
};
};
&lis33de {
status = "disabled";
};

21
arch/arm/boot/dts/omap3-overo-tobiduo.dts Normal file
View File

@ -0,0 +1,21 @@
/*
* Copyright (C) 2015 Ash Charles, Gumstix, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/*
* TobiDuo expansion board is manufactured by Gumstix Inc.
*/
/dts-v1/;
#include "omap3-overo.dtsi"
#include "omap3-overo-tobiduo-common.dtsi"
/ {
model = "OMAP35xx Gumstix Overo on TobiDuo";
compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
};

4
arch/arm/boot/dts/omap3-overo.dtsi
View File

@ -32,7 +32,3 @@
>;
};
};
&mcbsp2 {
status = "okay";
};

3
arch/arm/configs/omap2plus_defconfig
View File

@ -324,10 +324,13 @@ CONFIG_SND_USB_AUDIO=m
CONFIG_SND_SOC=m
CONFIG_SND_EDMA_SOC=m
CONFIG_SND_AM33XX_SOC_EVM=m
CONFIG_SND_DAVINCI_SOC_MCASP=m
CONFIG_SND_OMAP_SOC=m
CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
CONFIG_SND_SIMPLE_CARD=m
CONFIG_SND_SOC_TLV320AIC3X=m
CONFIG_HID_GENERIC=m
CONFIG_USB_HIDDEV=y
CONFIG_USB_KBD=m

15
arch/arm/mach-omap2/pdata-quirks.c
View File

@ -17,6 +17,7 @@
#include <linux/platform_data/pinctrl-single.h>
#include <linux/platform_data/iommu-omap.h>
#include <linux/platform_data/wkup_m3.h>
#include "common.h"
#include "common-board-devices.h"
@ -278,6 +279,14 @@ static struct iommu_platform_data omap4_iommu_pdata = {
};
#endif
#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
static struct wkup_m3_platform_data wkup_m3_data = {
.reset_name = "wkup_m3",
.assert_reset = omap_device_assert_hardreset,
.deassert_reset = omap_device_deassert_hardreset,
};
#endif
#ifdef CONFIG_SOC_OMAP5
static void __init omap5_uevm_legacy_init(void)
{
@ -340,6 +349,10 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
&am35xx_emac_pdata),
#endif
#ifdef CONFIG_SOC_AM33XX
OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
&wkup_m3_data),
#endif
#ifdef CONFIG_ARCH_OMAP4
OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata),
@ -353,6 +366,8 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
#endif
#ifdef CONFIG_SOC_AM43XX
OF_DEV_AUXDATA("ti,am437-padconf", 0x44e10800, "44e10800.pinmux", &pcs_pdata),
OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
&wkup_m3_data),
#endif
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",

20
include/dt-bindings/pinctrl/dra.h
View File

@ -30,6 +30,26 @@
#define MUX_MODE14 0xe
#define MUX_MODE15 0xf
/* Certain pins need virtual mode, but note: they may glitch */
#define MUX_VIRTUAL_MODE0 (MODE_SELECT | (0x0 << 4))
#define MUX_VIRTUAL_MODE1 (MODE_SELECT | (0x1 << 4))
#define MUX_VIRTUAL_MODE2 (MODE_SELECT | (0x2 << 4))
#define MUX_VIRTUAL_MODE3 (MODE_SELECT | (0x3 << 4))
#define MUX_VIRTUAL_MODE4 (MODE_SELECT | (0x4 << 4))
#define MUX_VIRTUAL_MODE5 (MODE_SELECT | (0x5 << 4))
#define MUX_VIRTUAL_MODE6 (MODE_SELECT | (0x6 << 4))
#define MUX_VIRTUAL_MODE7 (MODE_SELECT | (0x7 << 4))
#define MUX_VIRTUAL_MODE8 (MODE_SELECT | (0x8 << 4))
#define MUX_VIRTUAL_MODE9 (MODE_SELECT | (0x9 << 4))
#define MUX_VIRTUAL_MODE10 (MODE_SELECT | (0xa << 4))
#define MUX_VIRTUAL_MODE11 (MODE_SELECT | (0xb << 4))
#define MUX_VIRTUAL_MODE12 (MODE_SELECT | (0xc << 4))
#define MUX_VIRTUAL_MODE13 (MODE_SELECT | (0xd << 4))
#define MUX_VIRTUAL_MODE14 (MODE_SELECT | (0xe << 4))
#define MUX_VIRTUAL_MODE15 (MODE_SELECT | (0xf << 4))
#define MODE_SELECT (1 << 8)
#define PULL_ENA (0 << 16)
#define PULL_DIS (1 << 16)
#define PULL_UP (1 << 17)