hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

spi: rspi: Increase accuracy of bit rate for RZ 

When you leave the clock divider at 0, 130kHz is the lowest you can go.
Also, by adjusting the clock divider you can get more accurate resolutions
for clock speeds lower than 16MHz. This patch uses the clock divider as
part of the bit rate setup.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Chris Brandt 2016-08-05 09:36:03 -04:00 committed by Mark Brown
parent 29b4817d40
commit aeb8f8cb15
1 changed files with 12 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
drivers/spi/spi-rspi.c
View File

@ -295,14 +295,24 @@ static int rspi_set_config_register(struct rspi_data *rspi, int access_size)
static int rspi_rz_set_config_register(struct rspi_data *rspi, int access_size)
{
int spbr;
int div = 0;
unsigned long clksrc;
/* Sets output mode, MOSI signal, and (optionally) loopback */
rspi_write8(rspi, rspi->sppcr, RSPI_SPPCR);
clksrc = clk_get_rate(rspi->clk);
while (div < 3) {
if (rspi->max_speed_hz >= clksrc/4) /* 4=(CLK/2)/2 */
break;
div++;
clksrc /= 2;
}
/* Sets transfer bit rate */
spbr = DIV_ROUND_UP(clk_get_rate(rspi->clk),
2 * rspi->max_speed_hz) - 1;
spbr = DIV_ROUND_UP(clksrc, 2 * rspi->max_speed_hz) - 1;
rspi_write8(rspi, clamp(spbr, 0, 255), RSPI_SPBR);
rspi->spcmd |= div << 2;
/* Disable dummy transmission, set byte access */
rspi_write8(rspi, SPDCR_SPLBYTE, RSPI_SPDCR);