From c5df457ffe6db7569de9fb856de490b5317c97b4 Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Wed, 5 Jun 2013 02:26:51 +0000 Subject: [PATCH 1/8] powerpc/pci: Check the bus address instead of resource address in pcibios_fixup_resources If a BAR has the value of 0, we would assume that it is unset yet and then mark the resource as unset and would reassign it later. But after commit 6c5705fe (powerpc/PCI: get rid of device resource fixups) the pcibios_fixup_resources is invoked after the bus address was translated to linux resource. So the value of res->start is resource address. And since the resource and bus address may be different, we should translate it to the bus address before doing the check. Signed-off-by: Kevin Hao Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/pci-common.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 7f2273cc3c7d..eabeec991016 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -827,6 +827,7 @@ static void pcibios_fixup_resources(struct pci_dev *dev) } for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { struct resource *res = dev->resource + i; + struct pci_bus_region reg; if (!res->flags) continue; @@ -835,8 +836,9 @@ static void pcibios_fixup_resources(struct pci_dev *dev) * at 0 as unset as well, except if PCI_PROBE_ONLY is also set * since in that case, we don't want to re-assign anything */ + pcibios_resource_to_bus(dev, ®, res); if (pci_has_flag(PCI_REASSIGN_ALL_RSRC) || - (res->start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) { + (reg.start == 0 && !pci_has_flag(PCI_PROBE_ONLY))) { /* Only print message if not re-assigning */ if (!pci_has_flag(PCI_REASSIGN_ALL_RSRC)) pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] " From b8b3de224f194005ad87ede6fd022fcc2bef3b1a Mon Sep 17 00:00:00 2001 From: Gavin Shan Date: Wed, 5 Jun 2013 14:25:50 +0000 Subject: [PATCH 2/8] powerpc/eeh: Don't check RTAS token to get PE addr RTAS token "ibm,get-config-addr-info" or ibm,get-config-addr-info2" are used to retrieve the PE address according to PCI address, which made up of domain/bus/slot/function. If we don't have those 2 tokens, the domain/bus/slot/function would be used as the address for EEH RTAS operations. Some older f/w might not have those 2 tokens and that blocks the EEH functionality to be initialized. It was introduced by commit e2af155c ("powerpc/eeh: pseries platform EEH initialization"). The patch skips the check on those 2 tokens so we can bring up EEH functionality successfully. And domain/bus/slot/function will be used as address for EEH RTAS operations. Cc: # v3.4+ Reported-by: Robert Knight Signed-off-by: Gavin Shan Tested-by: Robert Knight Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/platforms/pseries/eeh_pseries.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-) diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index 19506f935737..b456b157d33d 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -83,7 +83,11 @@ static int pseries_eeh_init(void) ibm_configure_pe = rtas_token("ibm,configure-pe"); ibm_configure_bridge = rtas_token("ibm,configure-bridge"); - /* necessary sanity check */ + /* + * Necessary sanity check. We needn't check "get-config-addr-info" + * and its variant since the old firmware probably support address + * of domain/bus/slot/function for EEH RTAS operations. + */ if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE) { pr_warning("%s: RTAS service invalid\n", __func__); @@ -102,12 +106,6 @@ static int pseries_eeh_init(void) pr_warning("%s: RTAS service invalid\n", __func__); return -EINVAL; - } else if (ibm_get_config_addr_info2 == RTAS_UNKNOWN_SERVICE && - ibm_get_config_addr_info == RTAS_UNKNOWN_SERVICE) { - pr_warning("%s: RTAS service and " - " invalid\n", - __func__); - return -EINVAL; } else if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE && ibm_configure_bridge == RTAS_UNKNOWN_SERVICE) { pr_warning("%s: RTAS service and " From 6a60f9e7d8bb3e81fa8bd6752f1473e216424ec4 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Tue, 4 Jun 2013 19:38:54 +0000 Subject: [PATCH 3/8] powerpc/power8: Fix oprofile and perf In 2ac6f42 powerpc/cputable: Fix oprofile_cpu_type on power8 we broke all power8 hw events. This reverts this change and uses oprofile_type instead. Perf now works on POWER8 again and oprofile will revert to using timers on POWER8. Kudos to mpe this fix. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/cputable.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 1f0937d7d4b5..2a45d0f04385 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -452,8 +452,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .mmu_features = MMU_FTRS_POWER8, .icache_bsize = 128, .dcache_bsize = 128, - .oprofile_type = PPC_OPROFILE_POWER4, - .oprofile_cpu_type = 0, + .oprofile_type = PPC_OPROFILE_INVALID, + .oprofile_cpu_type = "ppc64/ibm-compat-v1", .cpu_setup = __setup_cpu_power8, .cpu_restore = __restore_cpu_power8, .platform = "power8", @@ -506,8 +506,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 6, .pmc_type = PPC_PMC_IBM, - .oprofile_cpu_type = 0, - .oprofile_type = PPC_OPROFILE_POWER4, + .oprofile_cpu_type = "ppc64/power8", + .oprofile_type = PPC_OPROFILE_INVALID, .cpu_setup = __setup_cpu_power8, .cpu_restore = __restore_cpu_power8, .platform = "power8", From d7c67fb1cf00b84829ae06fca04ad39408f156ba Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 29 May 2013 21:33:18 +0000 Subject: [PATCH 4/8] powerpc/pseries: Simplify denormalization handler The following simplifies the denorm code by using macros to generate the long stream of almost identical instructions. This patch results in no changes to the output binary, but removes a lot of lines of code. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/exceptions-64s.S | 80 ++++++---------------------- 1 file changed, 16 insertions(+), 64 deletions(-) diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index e6eba1bf61ad..3c9296bcf960 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -454,38 +454,14 @@ BEGIN_FTR_SECTION xori r10,r10,(MSR_FE0|MSR_FE1) mtmsrd r10 sync - fmr 0,0 - fmr 1,1 - fmr 2,2 - fmr 3,3 - fmr 4,4 - fmr 5,5 - fmr 6,6 - fmr 7,7 - fmr 8,8 - fmr 9,9 - fmr 10,10 - fmr 11,11 - fmr 12,12 - fmr 13,13 - fmr 14,14 - fmr 15,15 - fmr 16,16 - fmr 17,17 - fmr 18,18 - fmr 19,19 - fmr 20,20 - fmr 21,21 - fmr 22,22 - fmr 23,23 - fmr 24,24 - fmr 25,25 - fmr 26,26 - fmr 27,27 - fmr 28,28 - fmr 29,29 - fmr 30,30 - fmr 31,31 + +#define FMR2(n) fmr (n), (n) ; fmr n+1, n+1 +#define FMR4(n) FMR2(n) ; FMR2(n+2) +#define FMR8(n) FMR4(n) ; FMR4(n+4) +#define FMR16(n) FMR8(n) ; FMR8(n+8) +#define FMR32(n) FMR16(n) ; FMR16(n+16) + FMR32(0) + FTR_SECTION_ELSE /* * To denormalise we need to move a copy of the register to itself. @@ -495,38 +471,14 @@ FTR_SECTION_ELSE oris r10,r10,MSR_VSX@h mtmsrd r10 sync - XVCPSGNDP(0,0,0) - XVCPSGNDP(1,1,1) - XVCPSGNDP(2,2,2) - XVCPSGNDP(3,3,3) - XVCPSGNDP(4,4,4) - XVCPSGNDP(5,5,5) - XVCPSGNDP(6,6,6) - XVCPSGNDP(7,7,7) - XVCPSGNDP(8,8,8) - XVCPSGNDP(9,9,9) - XVCPSGNDP(10,10,10) - XVCPSGNDP(11,11,11) - XVCPSGNDP(12,12,12) - XVCPSGNDP(13,13,13) - XVCPSGNDP(14,14,14) - XVCPSGNDP(15,15,15) - XVCPSGNDP(16,16,16) - XVCPSGNDP(17,17,17) - XVCPSGNDP(18,18,18) - XVCPSGNDP(19,19,19) - XVCPSGNDP(20,20,20) - XVCPSGNDP(21,21,21) - XVCPSGNDP(22,22,22) - XVCPSGNDP(23,23,23) - XVCPSGNDP(24,24,24) - XVCPSGNDP(25,25,25) - XVCPSGNDP(26,26,26) - XVCPSGNDP(27,27,27) - XVCPSGNDP(28,28,28) - XVCPSGNDP(29,29,29) - XVCPSGNDP(30,30,30) - XVCPSGNDP(31,31,31) + +#define XVCPSGNDP2(n) XVCPSGNDP(n,n,n) ; XVCPSGNDP(n+1,n+1,n+1) +#define XVCPSGNDP4(n) XVCPSGNDP2(n) ; XVCPSGNDP2(n+2) +#define XVCPSGNDP8(n) XVCPSGNDP4(n) ; XVCPSGNDP4(n+4) +#define XVCPSGNDP16(n) XVCPSGNDP8(n) ; XVCPSGNDP8(n+8) +#define XVCPSGNDP32(n) XVCPSGNDP16(n) ; XVCPSGNDP16(n+16) + XVCPSGNDP32(0) + ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206) mtspr SPRN_HSRR0,r11 mtcrf 0x80,r9 From fb0fce3e554e5513aaa1c1c52b2ece11feea3c7d Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Wed, 29 May 2013 21:33:19 +0000 Subject: [PATCH 5/8] powerpc/power8: Update denormalization handler POWER8 can take a denormalisation exception on any VSX registers. This does the extra 32 VSX registers we don't currently handle. Signed-off-by: Michael Neuling Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/exceptions-64s.S | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/powerpc/kernel/exceptions-64s.S b/arch/powerpc/kernel/exceptions-64s.S index 3c9296bcf960..e783453f910d 100644 --- a/arch/powerpc/kernel/exceptions-64s.S +++ b/arch/powerpc/kernel/exceptions-64s.S @@ -480,6 +480,16 @@ FTR_SECTION_ELSE XVCPSGNDP32(0) ALT_FTR_SECTION_END_IFCLR(CPU_FTR_ARCH_206) + +BEGIN_FTR_SECTION + b denorm_done +END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S) +/* + * To denormalise we need to move a copy of the register to itself. + * For POWER8 we need to do that for all 64 VSX registers + */ + XVCPSGNDP32(32) +denorm_done: mtspr SPRN_HSRR0,r11 mtcrf 0x80,r9 ld r9,PACA_EXGEN+EX_R9(r13) From 82a9f16adc12f51c3f8ea59a7c3c120241aff836 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Thu, 16 May 2013 20:27:31 +0000 Subject: [PATCH 6/8] powerpc/hw_breakpoints: Add DABRX cpu feature to fix 32-bit regression When introducing support for DABRX in 4474ef0, we broke older 32-bit CPUs that don't have that register. Some CPUs have a DABR but not DABRX. Configuration are: - No 32bit CPUs have DABRX but some have DABR. - POWER4+ and below have the DABR but no DABRX. - 970 and POWER5 and above have DABR and DABRX. - POWER8 has DAWR, hence no DABRX. This introduces CPU_FTR_DABRX and sets it on appropriate CPUs. We use the top 64 bits for CPU FTR bits since only 64 bit CPUs have this. Processors that don't have the DABRX will still work as they will fall back to software filtering these breakpoints via perf_exclude_event(). Signed-off-by: Michael Neuling Reported-by: "Gorelik, Jacob (335F)" cc: stable@vger.kernel.org (v3.9 only) Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/include/asm/cputable.h | 17 ++++++++++------- arch/powerpc/kernel/process.c | 3 ++- 2 files changed, 12 insertions(+), 8 deletions(-) diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h index 26807e5aff51..6f3887d884d2 100644 --- a/arch/powerpc/include/asm/cputable.h +++ b/arch/powerpc/include/asm/cputable.h @@ -176,6 +176,7 @@ extern const char *powerpc_base_platform; #define CPU_FTR_CFAR LONG_ASM_CONST(0x0100000000000000) #define CPU_FTR_HAS_PPR LONG_ASM_CONST(0x0200000000000000) #define CPU_FTR_DAWR LONG_ASM_CONST(0x0400000000000000) +#define CPU_FTR_DABRX LONG_ASM_CONST(0x0800000000000000) #ifndef __ASSEMBLY__ @@ -394,19 +395,20 @@ extern const char *powerpc_base_platform; CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_201 | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA | \ CPU_FTR_CP_USE_DCBTZ | CPU_FTR_STCX_CHECKS_ADDRESS | \ - CPU_FTR_HVMODE) + CPU_FTR_HVMODE | CPU_FTR_DABRX) #define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | CPU_FTR_PURR | \ - CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB) + CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_DABRX) #define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_COHERENT_ICACHE | \ CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \ CPU_FTR_DSCR | CPU_FTR_UNALIGNED_LD_STD | \ - CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_CFAR) + CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_CFAR | \ + CPU_FTR_DABRX) #define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\ CPU_FTR_MMCRA | CPU_FTR_SMT | \ @@ -415,7 +417,7 @@ extern const char *powerpc_base_platform; CPU_FTR_DSCR | CPU_FTR_SAO | CPU_FTR_ASYM_SMT | \ CPU_FTR_STCX_CHECKS_ADDRESS | CPU_FTR_POPCNTB | CPU_FTR_POPCNTD | \ CPU_FTR_ICSWX | CPU_FTR_CFAR | CPU_FTR_HVMODE | \ - CPU_FTR_VMX_COPY | CPU_FTR_HAS_PPR) + CPU_FTR_VMX_COPY | CPU_FTR_HAS_PPR | CPU_FTR_DABRX) #define CPU_FTRS_POWER8 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | CPU_FTR_ARCH_206 |\ CPU_FTR_MMCRA | CPU_FTR_SMT | \ @@ -430,14 +432,15 @@ extern const char *powerpc_base_platform; CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \ CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \ CPU_FTR_PAUSE_ZERO | CPU_FTR_CELL_TB_BUG | CPU_FTR_CP_USE_DCBTZ | \ - CPU_FTR_UNALIGNED_LD_STD) + CPU_FTR_UNALIGNED_LD_STD | CPU_FTR_DABRX) #define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_ALTIVEC_COMP | \ - CPU_FTR_PURR | CPU_FTR_REAL_LE) + CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_DABRX) #define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | CPU_FTR_PPCAS_ARCH_V2) #define CPU_FTRS_A2 (CPU_FTR_USE_TB | CPU_FTR_SMT | CPU_FTR_DBELL | \ - CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN | CPU_FTR_ICSWX) + CPU_FTR_NOEXECUTE | CPU_FTR_NODSISRALIGN | \ + CPU_FTR_ICSWX | CPU_FTR_DABRX ) #ifdef __powerpc64__ #ifdef CONFIG_PPC_BOOK3E diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c index a902723fdc69..b0f3e3f77e72 100644 --- a/arch/powerpc/kernel/process.c +++ b/arch/powerpc/kernel/process.c @@ -399,7 +399,8 @@ static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) static inline int __set_dabr(unsigned long dabr, unsigned long dabrx) { mtspr(SPRN_DABR, dabr); - mtspr(SPRN_DABRX, dabrx); + if (cpu_has_feature(CPU_FTR_DABRX)) + mtspr(SPRN_DABRX, dabrx); return 0; } #else From 6772faa1ba22eba18d087c2459030a683b65be57 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 5 Jun 2013 17:58:20 +0000 Subject: [PATCH 7/8] powerpc/perf: Fix deadlock caused by calling printk() in PMU exception In commit bc09c21 "Fix finding overflowed PMC in interrupt" we added a printk() to the PMU exception handler. Unfortunately that is not safe. The problem is that the PMU exception may run even when interrupts are soft disabled, aka NMI context. We do this so that we can profile parts of the kernel that have interrupts soft-disabled. But by calling printk() from the exception handler, we can potentially deadlock in the printk code on logbuf_lock, eg: [c00000038ba575c0] c000000000081928 .vprintk_emit+0xa8/0x540 [c00000038ba576a0] c0000000007bcde8 .printk+0x48/0x58 [c00000038ba57710] c000000000076504 .perf_event_interrupt+0x2d4/0x490 [c00000038ba57810] c00000000001f6f8 .performance_monitor_exception+0x48/0x60 [c00000038ba57880] c0000000000032cc performance_monitor_common+0x14c/0x180 --- Exception: f01 (Performance Monitor) at c0000000007b25d4 ._raw_spin_lock_irq +0x64/0xc0 [c00000038ba57bf0] c00000000007ed90 .devkmsg_read+0xd0/0x5a0 [c00000038ba57d00] c0000000001c2934 .vfs_read+0xc4/0x1e0 [c00000038ba57d90] c0000000001c2cd8 .SyS_read+0x58/0xd0 [c00000038ba57e30] c000000000009d54 syscall_exit+0x0/0x98 --- Exception: c01 (System Call) at 00001fffffbf6f7c SP (3ffff6d4de10) is in userspace Fix it by making sure we only call printk() when we are not in NMI context. Signed-off-by: Michael Ellerman Cc: # 3.9 Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/perf/core-book3s.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/perf/core-book3s.c b/arch/powerpc/perf/core-book3s.c index 845c867444e6..29c6482890c8 100644 --- a/arch/powerpc/perf/core-book3s.c +++ b/arch/powerpc/perf/core-book3s.c @@ -1758,7 +1758,7 @@ static void perf_event_interrupt(struct pt_regs *regs) } } } - if ((!found) && printk_ratelimit()) + if (!found && !nmi && printk_ratelimit()) printk(KERN_WARNING "Can't find PMC that caused IRQ\n"); /* From b11ae95100f7061b39a15e5c1ecbf862464ac4b4 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 5 Jun 2013 18:03:36 +0000 Subject: [PATCH 8/8] powerpc: Partial revert of "Context switch more PMU related SPRs" In commit 59affcd I added context switching of more PMU SPRs, because they are potentially exposed to userspace on Power8. However despite me being a smart arse in the commit message it's actually not correct. In particular it interacts badly with a global perf record. We will have to do something more complicated, but that will have to wait for 3.11. Signed-off-by: Michael Ellerman Signed-off-by: Benjamin Herrenschmidt --- arch/powerpc/kernel/entry_64.S | 28 ---------------------------- 1 file changed, 28 deletions(-) diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 246b11c4fe7e..8741c854e03d 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -465,20 +465,6 @@ BEGIN_FTR_SECTION std r0, THREAD_EBBHR(r3) mfspr r0, SPRN_EBBRR std r0, THREAD_EBBRR(r3) - - /* PMU registers made user read/(write) by EBB */ - mfspr r0, SPRN_SIAR - std r0, THREAD_SIAR(r3) - mfspr r0, SPRN_SDAR - std r0, THREAD_SDAR(r3) - mfspr r0, SPRN_SIER - std r0, THREAD_SIER(r3) - mfspr r0, SPRN_MMCR0 - std r0, THREAD_MMCR0(r3) - mfspr r0, SPRN_MMCR2 - std r0, THREAD_MMCR2(r3) - mfspr r0, SPRN_MMCRA - std r0, THREAD_MMCRA(r3) END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) #endif @@ -581,20 +567,6 @@ BEGIN_FTR_SECTION ld r0, THREAD_EBBRR(r4) mtspr SPRN_EBBRR, r0 - /* PMU registers made user read/(write) by EBB */ - ld r0, THREAD_SIAR(r4) - mtspr SPRN_SIAR, r0 - ld r0, THREAD_SDAR(r4) - mtspr SPRN_SDAR, r0 - ld r0, THREAD_SIER(r4) - mtspr SPRN_SIER, r0 - ld r0, THREAD_MMCR0(r4) - mtspr SPRN_MMCR0, r0 - ld r0, THREAD_MMCR2(r4) - mtspr SPRN_MMCR2, r0 - ld r0, THREAD_MMCRA(r4) - mtspr SPRN_MMCRA, r0 - ld r0,THREAD_TAR(r4) mtspr SPRN_TAR,r0 END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)