From d55bda1b3e7c5a87f10da54fdda866a9a9cef30b Mon Sep 17 00:00:00 2001 From: Christian Hoff Date: Mon, 12 Nov 2018 11:11:29 -0800 Subject: [PATCH 01/14] Input: matrix_keypad - check for errors from of_get_named_gpio() "of_get_named_gpio()" returns a negative error value if it fails and drivers should check for this. This missing check was now added to the matrix_keypad driver. In my case "of_get_named_gpio()" returned -EPROBE_DEFER because the referenced GPIOs belong to an I/O expander, which was not yet probed at the point in time when the matrix_keypad driver was loading. Because the driver did not check for errors from the "of_get_named_gpio()" routine, it was assuming that "-EPROBE_DEFER" is actually a GPIO number and continued as usual, which led to further errors like this later on: WARNING: CPU: 3 PID: 167 at drivers/gpio/gpiolib.c:114 gpio_to_desc+0xc8/0xd0 invalid GPIO -517 Note that the "GPIO number" -517 in the error message above is actually "-EPROBE_DEFER". As part of the patch a misleading error message "no platform data defined" was also removed. This does not lead to information loss because the other error paths in matrix_keypad_parse_dt() already print an error. Signed-off-by: Christian Hoff Suggested-by: Sebastian Reichel Reviewed-by: Sebastian Reichel Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/matrix_keypad.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c index 41614c185918..782dda68d93a 100644 --- a/drivers/input/keyboard/matrix_keypad.c +++ b/drivers/input/keyboard/matrix_keypad.c @@ -407,7 +407,7 @@ matrix_keypad_parse_dt(struct device *dev) struct matrix_keypad_platform_data *pdata; struct device_node *np = dev->of_node; unsigned int *gpios; - int i, nrow, ncol; + int ret, i, nrow, ncol; if (!np) { dev_err(dev, "device lacks DT data\n"); @@ -452,12 +452,19 @@ matrix_keypad_parse_dt(struct device *dev) return ERR_PTR(-ENOMEM); } - for (i = 0; i < pdata->num_row_gpios; i++) - gpios[i] = of_get_named_gpio(np, "row-gpios", i); + for (i = 0; i < nrow; i++) { + ret = of_get_named_gpio(np, "row-gpios", i); + if (ret < 0) + return ERR_PTR(ret); + gpios[i] = ret; + } - for (i = 0; i < pdata->num_col_gpios; i++) - gpios[pdata->num_row_gpios + i] = - of_get_named_gpio(np, "col-gpios", i); + for (i = 0; i < ncol; i++) { + ret = of_get_named_gpio(np, "col-gpios", i); + if (ret < 0) + return ERR_PTR(ret); + gpios[nrow + i] = ret; + } pdata->row_gpios = gpios; pdata->col_gpios = &gpios[pdata->num_row_gpios]; @@ -484,10 +491,8 @@ static int matrix_keypad_probe(struct platform_device *pdev) pdata = dev_get_platdata(&pdev->dev); if (!pdata) { pdata = matrix_keypad_parse_dt(&pdev->dev); - if (IS_ERR(pdata)) { - dev_err(&pdev->dev, "no platform data defined\n"); + if (IS_ERR(pdata)) return PTR_ERR(pdata); - } } else if (!pdata->keymap_data) { dev_err(&pdev->dev, "no keymap data defined\n"); return -EINVAL; From 3ed64da3b790be7c63601e8ca6341b7dff74a660 Mon Sep 17 00:00:00 2001 From: Patrick Gaskin Date: Mon, 12 Nov 2018 11:12:24 -0800 Subject: [PATCH 02/14] Input: elan_i2c - add ELAN0620 to the ACPI table Add ELAN0620 to the ACPI table to support the elan touchpad in the Lenovo IdeaPad 130-15IKB. Signed-off-by: Patrick Gaskin Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elan_i2c_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index b0f9d19b3410..99227807a584 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -1348,6 +1348,7 @@ static const struct acpi_device_id elan_acpi_id[] = { { "ELAN0618", 0 }, { "ELAN061C", 0 }, { "ELAN061D", 0 }, + { "ELAN0620", 0 }, { "ELAN0622", 0 }, { "ELAN1000", 0 }, { } From ac5722c1643a2fb75224c79b578214956d34f989 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Mon, 12 Nov 2018 11:23:39 -0800 Subject: [PATCH 03/14] Input: cros_ec_keyb - fix button/switch capability reports The cros_ec_keyb_bs array lists buttons and switches together, expecting that its users will match the appropriate type and bit fields. But cros_ec_keyb_register_bs() only checks the 'bit' field, which causes misreported input capabilities in some cases. For example, tablets (e.g., Scarlet -- a.k.a. Acer Chromebook Tab 10) were reporting a SW_LID capability, because EC_MKBP_POWER_BUTTON and EC_MKBP_LID_OPEN happen to share the same bit. (This has comedic effect on a tablet, in which a power-management daemon then thinks this "lid" is closed, and so puts the system to sleep as soon as it boots!) To fix this, check both the 'ev_type' and 'bit' fields before reporting the capability. Tested with a lid (Kevin / Samsung Chromebook Plus) and without a lid (Scarlet / Acer Chromebook Tab 10). This error got introduced when porting the feature from the downstream Chromium OS kernel to be upstreamed. Fixes: cdd7950e7aa4 ("input: cros_ec_keyb: Add non-matrix buttons and switches") Cc: Signed-off-by: Brian Norris Reviewed-by: Heiko Stuebner Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/cros_ec_keyb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c index 81be6f781f0b..d56001181598 100644 --- a/drivers/input/keyboard/cros_ec_keyb.c +++ b/drivers/input/keyboard/cros_ec_keyb.c @@ -493,7 +493,8 @@ static int cros_ec_keyb_register_bs(struct cros_ec_keyb *ckdev) for (i = 0; i < ARRAY_SIZE(cros_ec_keyb_bs); i++) { const struct cros_ec_bs_map *map = &cros_ec_keyb_bs[i]; - if (buttons & BIT(map->bit)) + if ((map->ev_type == EV_KEY && (buttons & BIT(map->bit))) || + (map->ev_type == EV_SW && (switches & BIT(map->bit)))) input_set_capability(idev, map->ev_type, map->code); } From 6c4b88288abf908d6fe9fc71fdfeb69cb4135193 Mon Sep 17 00:00:00 2001 From: Ding Tao Date: Mon, 12 Nov 2018 11:27:11 -0800 Subject: [PATCH 04/14] Input: dt-bindings - fix a typo in file input-reset.txt Replace sysrq-reset-seq with keyset. Signed-off-by: Ding Tao Signed-off-by: Dmitry Torokhov --- Documentation/devicetree/bindings/input/input-reset.txt | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/input/input-reset.txt b/Documentation/devicetree/bindings/input/input-reset.txt index 2bb2626fdb78..1ca6cc5ebf8e 100644 --- a/Documentation/devicetree/bindings/input/input-reset.txt +++ b/Documentation/devicetree/bindings/input/input-reset.txt @@ -12,7 +12,7 @@ The /chosen node should contain a 'linux,sysrq-reset-seq' child node to define a set of keys. Required property: -sysrq-reset-seq: array of Linux keycodes, one keycode per cell. +keyset: array of Linux keycodes, one keycode per cell. Optional property: timeout-ms: duration keys must be pressed together in milliseconds before From dda2af7418db9dd51913cb71d9ec9266d4f7924d Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 12 Nov 2018 11:29:27 -0800 Subject: [PATCH 05/14] Input: migor_ts - convert to SPDX identifiers This patch updates license to use SPDX-License-Identifier instead of verbose license text. Signed-off-by: Kuninori Morimoto Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/migor_ts.c | 15 +-------------- 1 file changed, 1 insertion(+), 14 deletions(-) diff --git a/drivers/input/touchscreen/migor_ts.c b/drivers/input/touchscreen/migor_ts.c index 02fb11985819..42d3fd7e04d7 100644 --- a/drivers/input/touchscreen/migor_ts.c +++ b/drivers/input/touchscreen/migor_ts.c @@ -1,23 +1,10 @@ +// SPDX-License-Identifier: GPL-2.0+ /* * Touch Screen driver for Renesas MIGO-R Platform * * Copyright (c) 2008 Magnus Damm * Copyright (c) 2007 Ujjwal Pande , * Kenati Technologies Pvt Ltd. - * - * This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public - * License as published by the Free Software Foundation; either - * version 2 of the License, or (at your option) any later version. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public - * License along with this library; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include #include From 4aeba6418a160d8e58501cd57800252ba349ad1a Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Mon, 12 Nov 2018 11:30:06 -0800 Subject: [PATCH 06/14] Input: st1232 - convert to SPDX identifiers This patch updates license to use SPDX-License-Identifier instead of verbose license text. As original license mentioned, it is GPL-2.0 in SPDX. Then, MODULE_LICENSE() should be "GPL v2" instead of "GPL". See ${LINUX}/include/linux/module.h "GPL" [GNU Public License v2 or later] "GPL v2" [GNU Public License v2] Signed-off-by: Kuninori Morimoto Signed-off-by: Dmitry Torokhov --- drivers/input/touchscreen/st1232.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c index b71673911aac..11ff32c68025 100644 --- a/drivers/input/touchscreen/st1232.c +++ b/drivers/input/touchscreen/st1232.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0 /* * ST1232 Touchscreen Controller Driver * @@ -7,15 +8,6 @@ * Using code from: * - android.git.kernel.org: projects/kernel/common.git: synaptics_i2c_rmi.c * Copyright (C) 2007 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. */ #include @@ -295,4 +287,4 @@ module_i2c_driver(st1232_ts_driver); MODULE_AUTHOR("Tony SIM "); MODULE_DESCRIPTION("SITRONIX ST1232 Touchscreen Controller Driver"); -MODULE_LICENSE("GPL"); +MODULE_LICENSE("GPL v2"); From e94b9f12fa2ceb4d5067aa2a7580b02850fb272e Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 12 Nov 2018 11:41:04 -0800 Subject: [PATCH 07/14] Input: atkbd - clean up indentation issue Trivial fix to clean up indentation issues, add missing tab Signed-off-by: Colin Ian King Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/atkbd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 7e75835e220f..850bb259c20e 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -841,7 +841,7 @@ static int atkbd_select_set(struct atkbd *atkbd, int target_set, int allow_extra if (param[0] != 3) { param[0] = 2; if (ps2_command(ps2dev, param, ATKBD_CMD_SSCANSET)) - return 2; + return 2; } ps2_command(ps2dev, param, ATKBD_CMD_SETALL_MBR); From 10f91c73cc41ceead210a905dbd196398e99c7d2 Mon Sep 17 00:00:00 2001 From: Vitaly Kuznetsov Date: Thu, 15 Nov 2018 11:05:10 -0800 Subject: [PATCH 08/14] Input: hyper-v - fix wakeup from suspend-to-idle It makes little sense but still possible to put Hyper-V guests into suspend-to-idle state. To wake them up two wakeup sources were registered in the past: hyperv-keyboard and hid-hyperv. However, since commit eed4d47efe95 ("ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle") pm_wakeup_event() from these devices is ignored. Switch to pm_wakeup_hard_event() API as these devices are actually the only possible way to wakeup Hyper-V guests. Fixes: eed4d47efe95 (ACPI / sleep: Ignore spurious SCI wakeups from suspend-to-idle) Reviewed-by: Rafael J. Wysocki Acked-by: K. Y. Srinivasan Acked-by: Jiri Kosina Signed-off-by: Vitaly Kuznetsov Signed-off-by: Dmitry Torokhov --- drivers/hid/hid-hyperv.c | 2 +- drivers/input/serio/hyperv-keyboard.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/hid/hid-hyperv.c b/drivers/hid/hid-hyperv.c index 3aa2bb9f0f81..fc1db8c4ff0f 100644 --- a/drivers/hid/hid-hyperv.c +++ b/drivers/hid/hid-hyperv.c @@ -309,7 +309,7 @@ static void mousevsc_on_receive(struct hv_device *device, hid_input_report(input_dev->hid_device, HID_INPUT_REPORT, input_dev->input_buf, len, 1); - pm_wakeup_event(&input_dev->device->device, 0); + pm_wakeup_hard_event(&input_dev->device->device); break; default: diff --git a/drivers/input/serio/hyperv-keyboard.c b/drivers/input/serio/hyperv-keyboard.c index 25151d9214e0..55288a026e4e 100644 --- a/drivers/input/serio/hyperv-keyboard.c +++ b/drivers/input/serio/hyperv-keyboard.c @@ -177,7 +177,7 @@ static void hv_kbd_on_receive(struct hv_device *hv_dev, * state because the Enter-UP can trigger a wakeup at once. */ if (!(info & IS_BREAK)) - pm_wakeup_event(&hv_dev->device, 0); + pm_wakeup_hard_event(&hv_dev->device); break; From bf87ade0dd7f8cf19dac4d3161d5e86abe0c062b Mon Sep 17 00:00:00 2001 From: Adam Wong Date: Thu, 29 Nov 2018 10:04:35 -0800 Subject: [PATCH 09/14] Input: elan_i2c - add support for ELAN0621 touchpad Added the ability to detect the ELAN0621 touchpad found in some Lenovo laptops. Signed-off-by: Adam Wong Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elan_i2c_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index 99227807a584..1428de803d2d 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -1349,6 +1349,7 @@ static const struct acpi_device_id elan_acpi_id[] = { { "ELAN061C", 0 }, { "ELAN061D", 0 }, { "ELAN0620", 0 }, + { "ELAN0621", 0 }, { "ELAN0622", 0 }, { "ELAN1000", 0 }, { } From ad33429cd02565c28404bb16ae7a4c2bdfda6626 Mon Sep 17 00:00:00 2001 From: Noah Westervelt Date: Thu, 29 Nov 2018 10:10:35 -0800 Subject: [PATCH 10/14] Input: elan_i2c - add ACPI ID for Lenovo IdeaPad 330-15ARR Add ELAN061E to the ACPI table to support Elan touchpad found in Lenovo IdeaPad 330-15ARR. Signed-off-by: Noah Westervelt Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/elan_i2c_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index 1428de803d2d..a94b6494e71a 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -1348,6 +1348,7 @@ static const struct acpi_device_id elan_acpi_id[] = { { "ELAN0618", 0 }, { "ELAN061C", 0 }, { "ELAN061D", 0 }, + { "ELAN061E", 0 }, { "ELAN0620", 0 }, { "ELAN0621", 0 }, { "ELAN0622", 0 }, From 9df39bedbf292680655c6a947c77d6562c693d4a Mon Sep 17 00:00:00 2001 From: Lyude Paul Date: Sat, 24 Nov 2018 23:28:10 -0800 Subject: [PATCH 11/14] Input: synaptics - add PNP ID for ThinkPad P50 to SMBus Noticed the other day the trackpoint felt different on my P50, then realized it was because rmi4 wasn't loading for this machine automatically. Suspend/resume, hibernate, and everything else seem to work perfectly fine on here. Signed-off-by: Lyude Paul Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index 5e85f3cca867..c42813d50591 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -170,6 +170,7 @@ static const char * const smbus_pnp_ids[] = { "LEN0048", /* X1 Carbon 3 */ "LEN0046", /* X250 */ "LEN004a", /* W541 */ + "LEN005b", /* P50 */ "LEN0071", /* T480 */ "LEN0072", /* X1 Carbon Gen 5 (2017) - Elan/ALPS trackpoint */ "LEN0073", /* X1 Carbon G5 (Elantech) */ From 5a6dab15f7a79817cab4af612ddd99eda793fce6 Mon Sep 17 00:00:00 2001 From: Teika Kazura Date: Mon, 3 Dec 2018 11:26:03 -0800 Subject: [PATCH 12/14] Input: synaptics - enable SMBus for HP 15-ay000 SMBus works fine for the touchpad with id SYN3221, used in the HP 15-ay000 series, This device has been reported in these messages in the "linux-input" mailing list: * https://marc.info/?l=linux-input&m=152016683003369&w=2 * https://www.spinics.net/lists/linux-input/msg52525.html Reported-by: Nitesh Debnath Reported-by: Teika Kazura Signed-off-by: Teika Kazura Reviewed-by: Benjamin Tissoires Signed-off-by: Dmitry Torokhov --- drivers/input/mouse/synaptics.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index c42813d50591..2bd5bb11c8ba 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -178,6 +178,7 @@ static const char * const smbus_pnp_ids[] = { "LEN0096", /* X280 */ "LEN0097", /* X280 -> ALPS trackpoint */ "LEN200f", /* T450s */ + "SYN3221", /* HP 15-ay000 */ NULL }; From a6754fae1e66e9a40fed406290d7ca3f2b4d227c Mon Sep 17 00:00:00 2001 From: Cameron Gutman Date: Thu, 29 Nov 2018 10:09:33 -0800 Subject: [PATCH 13/14] Input: xpad - quirk all PDP Xbox One gamepads Since we continue to find tons of new variants [0,1,2,3,4,5,6] that need the PDP quirk, let's just quirk all devices from PDP. [0]: https://github.com/paroj/xpad/pull/104 [1]: https://github.com/paroj/xpad/pull/105 [2]: https://github.com/paroj/xpad/pull/108 [3]: https://github.com/paroj/xpad/pull/109 [4]: https://github.com/paroj/xpad/pull/112 [5]: https://github.com/paroj/xpad/pull/115 [6]: https://github.com/paroj/xpad/pull/116 Fixes: e5c9c6a885fa ("Input: xpad - add support for PDP Xbox One controllers") Cc: stable@vger.kernel.org Signed-off-by: Cameron Gutman Signed-off-by: Dmitry Torokhov --- drivers/input/joystick/xpad.c | 16 ++++++---------- 1 file changed, 6 insertions(+), 10 deletions(-) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index d4b9db487b16..cfc8b94527b9 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -480,18 +480,18 @@ static const u8 xboxone_hori_init[] = { }; /* - * This packet is required for some of the PDP pads to start + * This packet is required for most (all?) of the PDP pads to start * sending input reports. These pads include: (0x0e6f:0x02ab), - * (0x0e6f:0x02a4). + * (0x0e6f:0x02a4), (0x0e6f:0x02a6). */ static const u8 xboxone_pdp_init1[] = { 0x0a, 0x20, 0x00, 0x03, 0x00, 0x01, 0x14 }; /* - * This packet is required for some of the PDP pads to start + * This packet is required for most (all?) of the PDP pads to start * sending input reports. These pads include: (0x0e6f:0x02ab), - * (0x0e6f:0x02a4). + * (0x0e6f:0x02a4), (0x0e6f:0x02a6). */ static const u8 xboxone_pdp_init2[] = { 0x06, 0x20, 0x00, 0x02, 0x01, 0x00 @@ -527,12 +527,8 @@ static const struct xboxone_init_packet xboxone_init_packets[] = { XBOXONE_INIT_PKT(0x0e6f, 0x0165, xboxone_hori_init), XBOXONE_INIT_PKT(0x0f0d, 0x0067, xboxone_hori_init), XBOXONE_INIT_PKT(0x0000, 0x0000, xboxone_fw2015_init), - XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init1), - XBOXONE_INIT_PKT(0x0e6f, 0x02ab, xboxone_pdp_init2), - XBOXONE_INIT_PKT(0x0e6f, 0x02a4, xboxone_pdp_init1), - XBOXONE_INIT_PKT(0x0e6f, 0x02a4, xboxone_pdp_init2), - XBOXONE_INIT_PKT(0x0e6f, 0x02a6, xboxone_pdp_init1), - XBOXONE_INIT_PKT(0x0e6f, 0x02a6, xboxone_pdp_init2), + XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_init1), + XBOXONE_INIT_PKT(0x0e6f, 0x0000, xboxone_pdp_init2), XBOXONE_INIT_PKT(0x24c6, 0x541a, xboxone_rumblebegin_init), XBOXONE_INIT_PKT(0x24c6, 0x542a, xboxone_rumblebegin_init), XBOXONE_INIT_PKT(0x24c6, 0x543a, xboxone_rumblebegin_init), From 6c3516fed7b61a3527459ccfa67fab130d910610 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 3 Dec 2018 11:24:30 -0800 Subject: [PATCH 14/14] Input: omap-keypad - fix keyboard debounce configuration I noticed that the Android v3.0.8 kernel on droid4 is using different keypad values from the mainline kernel and does not have issues with keys occasionally being stuck until pressed again. Turns out there was an earlier patch posted to fix this as "Input: omap-keypad: errata i689: Correct debounce time", but it was never reposted to fix use macros for timing calculations. This updated version is using macros, and also fixes the use of the input clock rate to use 32768KiHz instead of 32000KiHz. And we want to use the known good Android kernel values of 3 and 6 instead of 2 and 6 in the earlier patch. Reported-by: Pavel Machek Signed-off-by: Tony Lindgren Signed-off-by: Dmitry Torokhov --- drivers/input/keyboard/omap4-keypad.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/input/keyboard/omap4-keypad.c b/drivers/input/keyboard/omap4-keypad.c index 940d38b08e6b..ce8e2baf31bb 100644 --- a/drivers/input/keyboard/omap4-keypad.c +++ b/drivers/input/keyboard/omap4-keypad.c @@ -60,8 +60,18 @@ /* OMAP4 values */ #define OMAP4_VAL_IRQDISABLE 0x0 -#define OMAP4_VAL_DEBOUNCINGTIME 0x7 -#define OMAP4_VAL_PVT 0x7 + +/* + * Errata i689: If a key is released for a time shorter than debounce time, + * the keyboard will idle and never detect the key release. The workaround + * is to use at least a 12ms debounce time. See omap5432 TRM chapter + * "26.4.6.2 Keyboard Controller Timer" for more information. + */ +#define OMAP4_KEYPAD_PTV_DIV_128 0x6 +#define OMAP4_KEYPAD_DEBOUNCINGTIME_MS(dbms, ptv) \ + ((((dbms) * 1000) / ((1 << ((ptv) + 1)) * (1000000 / 32768))) - 1) +#define OMAP4_VAL_DEBOUNCINGTIME_16MS \ + OMAP4_KEYPAD_DEBOUNCINGTIME_MS(16, OMAP4_KEYPAD_PTV_DIV_128) enum { KBD_REVISION_OMAP4 = 0, @@ -181,9 +191,9 @@ static int omap4_keypad_open(struct input_dev *input) kbd_writel(keypad_data, OMAP4_KBD_CTRL, OMAP4_DEF_CTRL_NOSOFTMODE | - (OMAP4_VAL_PVT << OMAP4_DEF_CTRL_PTV_SHIFT)); + (OMAP4_KEYPAD_PTV_DIV_128 << OMAP4_DEF_CTRL_PTV_SHIFT)); kbd_writel(keypad_data, OMAP4_KBD_DEBOUNCINGTIME, - OMAP4_VAL_DEBOUNCINGTIME); + OMAP4_VAL_DEBOUNCINGTIME_16MS); /* clear pending interrupts */ kbd_write_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS, kbd_read_irqreg(keypad_data, OMAP4_KBD_IRQSTATUS));