usb: fixes for v3.8-rc5

Finally we have a build fix for fsl-mxc-udc UDC driver.
 
 We also have a fix for ep0 maxburst setting on DWC3
 which could confuse the HW if we tell it we had way
 too many streams on that endpoint when it _has_ to be
 only one.
 
 cppi_dma support for MUSB got a fix when running as a
 module. By dropping the wrong __init annotation, the
 function will be available even when we're modules and
 we're done with .init.text section.
 
 Last, but not least, we have a fix on FunctionFS which
 was causing a bug on our option parsing algorithm.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJQ+T2OAAoJEIaOsuA1yqRE/eEP/jJTOGu8LJegFohGFSVY80RK
 IuMhPCRa3uE26YFaP6OQOFHwVSrzMYfITcptQQsrQKv6zE25m+ZYOpD7pL8MQV8q
 YNhvBS44G7j42akQVoE0kqN00PCWyQgjGxx93+NSOik8IOUy4s9Em8yTkAsXwGa6
 CHId1KmEgEq3IbT/+XJAEjMvV7FHONF7p08LK1riPRtIC7sb6BODjdAPKj5Hv5r6
 o2xta0LslSNHMIs8CUpeK6qol9n6n9Oz7NRj2yEFiC/bebLjQ0X0Eo44QfwkLtqj
 u3hFL1BPfv39U47fmAugZqeelKfmPgpohY+CUrCc2Wqrvo1aae7nEJrU4xQV02WH
 kFj1I8EVtcSmq9TvnXaAW75MNPRUtKAJsxWTTVqTIzPBRYvVv0i+8whDDSiEj+xN
 FlqzpHd1ojKnqk+BS9nI9XXPGFV022xecPGj5rg9gTEuoutYndHl2LDBB+u6lraP
 FnhUHkQ4UtJH3yzuZ3Xv7ugrGK9FQX3zJKtXJXS85QTNtFlL80cK3Ph12d6xOCs1
 oGadH0wdCOE4lEjeTloaaC+/tMuiSWzLPQBcIUC5IAXrH9zLXuFnkB6RFEqspSJH
 ebFeJRNKodOaZxge4YbO2/kaY2MQa1hJfzlJtXexZNCKxK7iA+fL9a70KgmWJUs+
 DwPlhoa+JFwJLSYVnOow
 =4n68
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-v3.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

  usb: fixes for v3.8-rc5

  Finally we have a build fix for fsl-mxc-udc UDC driver.

  We also have a fix for ep0 maxburst setting on DWC3
  which could confuse the HW if we tell it we had way
  too many streams on that endpoint when it _has_ to be
  only one.

  cppi_dma support for MUSB got a fix when running as a
  module. By dropping the wrong __init annotation, the
  function will be available even when we're modules and
  we're done with .init.text section.

  Last, but not least, we have a fix on FunctionFS which
  was causing a bug on our option parsing algorithm.
This commit is contained in:
Greg Kroah-Hartman 2013-01-21 11:37:57 -08:00
commit ad2e632966
1706 changed files with 17823 additions and 10078 deletions

View File

@ -116,7 +116,7 @@ my_suspend (struct pci_dev * pci_dev,
return 0; /* a negative value on error, 0 on success. */
}
static void __devexit
static void
my_remove (struct pci_dev * pci_dev)
{
my_device *my = pci_get_drvdata (pci_dev);
@ -124,7 +124,7 @@ my_remove (struct pci_dev * pci_dev)
/* Describe me. */
}
static int __devinit
static int
my_probe (struct pci_dev * pci_dev,
const struct pci_device_id * pci_id)
{
@ -157,7 +157,7 @@ my_pci_driver = {
.id_table = my_pci_device_ids,
.probe = my_probe,
.remove = __devexit_p (my_remove),
.remove = my_remove,
/* Power management functions. */
.suspend = my_suspend,

View File

@ -76,7 +76,7 @@ To notify SR-IOV core of Virtual Function Migration:
Following piece of code illustrates the usage of the SR-IOV API.
static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
static int dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
pci_enable_sriov(dev, NR_VIRTFN);
@ -85,7 +85,7 @@ static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *
return 0;
}
static void __devexit dev_remove(struct pci_dev *dev)
static void dev_remove(struct pci_dev *dev)
{
pci_disable_sriov(dev);
@ -131,7 +131,7 @@ static struct pci_driver dev_driver = {
.name = "SR-IOV Physical Function driver",
.id_table = dev_id_table,
.probe = dev_probe,
.remove = __devexit_p(dev_remove),
.remove = dev_remove,
.suspend = dev_suspend,
.resume = dev_resume,
.shutdown = dev_shutdown,

View File

@ -183,12 +183,6 @@ Please mark the initialization and cleanup functions where appropriate
initializes.
__exit Exit code. Ignored for non-modular drivers.
__devinit Device initialization code.
Identical to __init if the kernel is not compiled
with CONFIG_HOTPLUG, normal function otherwise.
__devexit The same for __exit.
Tips on when/where to use the above attributes:
o The module_init()/module_exit() functions (and all
initialization functions called _only_ from these)
@ -196,20 +190,6 @@ Tips on when/where to use the above attributes:
o Do not mark the struct pci_driver.
o The ID table array should be marked __devinitconst; this is done
automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE().
o The probe() and remove() functions should be marked __devinit
and __devexit respectively. All initialization functions
exclusively called by the probe() routine, can be marked __devinit.
Ditto for remove() and __devexit.
o If mydriver_remove() is marked with __devexit(), then all address
references to mydriver_remove must use __devexit_p(mydriver_remove)
(in the struct pci_driver declaration for example).
__devexit_p() will generate the function name _or_ NULL if the
function will be discarded. For an example, see drivers/net/tg3.c.
o Do NOT mark a function if you are not sure which mark to use.
Better to not mark the function than mark the function wrong.

View File

@ -185,7 +185,7 @@ input driver:
.acpi_match_table ACPI_PTR(mpu3050_acpi_match),
},
.probe = mpu3050_probe,
.remove = __devexit_p(mpu3050_remove),
.remove = mpu3050_remove,
.id_table = mpu3050_ids,
};

View File

@ -60,11 +60,6 @@ clks: clkctrl@80040000 {
compatible = "fsl,imx23-clkctrl";
reg = <0x80040000 0x2000>;
#clock-cells = <1>;
clock-output-names =
...
"uart", /* 32 */
...
"end_of_list";
};
auart0: serial@8006c000 {

View File

@ -146,10 +146,6 @@ clks: ccm@53f80000 {
compatible = "fsl,imx25-ccm";
reg = <0x53f80000 0x4000>;
interrupts = <31>;
clock-output-names = ...
"uart_ipg",
"uart_serial",
...;
};
uart1: serial@43f90000 {

View File

@ -83,11 +83,6 @@ clks: clkctrl@80040000 {
compatible = "fsl,imx28-clkctrl";
reg = <0x80040000 0x2000>;
#clock-cells = <1>;
clock-output-names =
...
"uart", /* 45 */
...
"end_of_list";
};
auart0: serial@8006a000 {

View File

@ -211,10 +211,6 @@ clks: ccm@020c4000 {
reg = <0x020c4000 0x4000>;
interrupts = <0 87 0x04 0 88 0x04>;
#clock-cells = <1>;
clock-output-names = ...
"uart_ipg",
"uart_serial",
...;
};
uart1: serial@02020000 {

View File

@ -1,4 +1,19 @@
GPIO line that should be set high/low to power off a device
Driver a GPIO line that can be used to turn the power off.
The driver supports both level triggered and edge triggered power off.
At driver load time, the driver will request the given gpio line and
install a pm_power_off handler. If the optional properties 'input' is
not found, the GPIO line will be driven in the inactive
state. Otherwise its configured as an input.
When the pm_power_off is called, the gpio is configured as an output,
and drive active, so triggering a level triggered power off
condition. This will also cause an inactive->active edge condition, so
triggering positive edge triggered power off. After a delay of 100ms,
the GPIO is set to inactive, thus causing an active->inactive edge,
triggering negative edge triggered power off. After another 100ms
delay the GPIO is driver active again. If the power is still on and
the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted.
Required properties:
- compatible : should be "gpio-poweroff".
@ -13,10 +28,9 @@ Optional properties:
property is not specified, the GPIO is initialized as an output in its
inactive state.
Examples:
gpio-poweroff {
compatible = "gpio-poweroff";
gpios = <&gpio 4 0>; /* GPIO 4 Active Low */
gpios = <&gpio 4 0>;
};

View File

@ -0,0 +1,47 @@
CSR SiRFprimaII pinmux controller
Required properties:
- compatible : "sirf,prima2-pinctrl"
- reg : Address range of the pinctrl registers
- interrupts : Interrupts used by every GPIO group
- gpio-controller : Indicates this device is a GPIO controller
- interrupt-controller : Marks the device node as an interrupt controller
Optional properties:
- sirf,pullups : if n-th bit of m-th bank is set, set a pullup on GPIO-n of bank m
- sirf,pulldowns : if n-th bit of m-th bank is set, set a pulldown on GPIO-n of bank m
Please refer to pinctrl-bindings.txt in this directory for details of the common
pinctrl bindings used by client devices.
SiRFprimaII's pinmux nodes act as a container for an abitrary number of subnodes.
Each of these subnodes represents some desired configuration for a group of pins.
Required subnode-properties:
- sirf,pins : An array of strings. Each string contains the name of a group.
- sirf,function: A string containing the name of the function to mux to the
group.
Valid values for group and function names can be found from looking at the
group and function arrays in driver files:
drivers/pinctrl/pinctrl-sirf.c
For example, pinctrl might have subnodes like the following:
uart2_pins_a: uart2@0 {
uart {
sirf,pins = "uart2grp";
sirf,function = "uart2";
};
};
uart2_noflow_pins_a: uart2@1 {
uart {
sirf,pins = "uart2_nostreamctrlgrp";
sirf,function = "uart2_nostreamctrl";
};
};
For a specific board, if it wants to use uart2 without hardware flow control,
it can add the following to its board-specific .dts file.
uart2: uart@0xb0070000 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_noflow_pins_a>;
}

View File

@ -91,7 +91,7 @@ Example (from the nxp OHCI driver):
static const unsigned short normal_i2c[] = { 0x2c, 0x2d, I2C_CLIENT_END };
static int __devinit usb_hcd_nxp_probe(struct platform_device *pdev)
static int usb_hcd_nxp_probe(struct platform_device *pdev)
{
(...)
struct i2c_adapter *i2c_adap;

View File

@ -36,7 +36,7 @@ neigh/default/unres_qlen_bytes - INTEGER
The maximum number of bytes which may be used by packets
queued for each unresolved address by other network layers.
(added in linux 3.3)
Seting negative value is meaningless and will retrun error.
Setting negative value is meaningless and will return error.
Default: 65536 Bytes(64KB)
neigh/default/unres_qlen - INTEGER
@ -215,7 +215,7 @@ tcp_ecn - INTEGER
Possible values are:
0 Disable ECN. Neither initiate nor accept ECN.
1 Always request ECN on outgoing connection attempts.
2 Enable ECN when requested by incomming connections
2 Enable ECN when requested by incoming connections
but do not request ECN on outgoing connections.
Default: 2
@ -503,7 +503,7 @@ tcp_fastopen - INTEGER
tcp_syn_retries - INTEGER
Number of times initial SYNs for an active TCP connection attempt
will be retransmitted. Should not be higher than 255. Default value
is 6, which corresponds to 63seconds till the last restransmission
is 6, which corresponds to 63seconds till the last retransmission
with the current initial RTO of 1second. With this the final timeout
for an active TCP connection attempt will happen after 127seconds.
@ -1331,6 +1331,12 @@ force_tllao - BOOLEAN
race condition where the sender deletes the cached link-layer address
prior to receiving a response to a previous solicitation."
ndisc_notify - BOOLEAN
Define mode for notification of address and device changes.
0 - (default): do nothing
1 - Generate unsolicited neighbour advertisements when device is brought
up or hardware address changes.
icmp/*:
ratelimit - INTEGER
Limit the maximal rates for sending ICMPv6 packets.
@ -1530,7 +1536,7 @@ cookie_hmac_alg - STRING
* sha1
* none
Ability to assign md5 or sha1 as the selected alg is predicated on the
configuarion of those algorithms at build time (CONFIG_CRYPTO_MD5 and
configuration of those algorithms at build time (CONFIG_CRYPTO_MD5 and
CONFIG_CRYPTO_SHA1).
Default: Dependent on configuration. MD5 if available, else SHA1 if
@ -1548,7 +1554,7 @@ rcvbuf_policy - INTEGER
blocking.
1: rcvbuf space is per association
0: recbuf space is per socket
0: rcvbuf space is per socket
Default: 0

View File

@ -642,12 +642,13 @@ out the following operations:
* During system suspend it calls pm_runtime_get_noresume() and
pm_runtime_barrier() for every device right before executing the
subsystem-level .suspend() callback for it. In addition to that it calls
pm_runtime_disable() for every device right after executing the
subsystem-level .suspend() callback for it.
__pm_runtime_disable() with 'false' as the second argument for every device
right before executing the subsystem-level .suspend_late() callback for it.
* During system resume it calls pm_runtime_enable() and pm_runtime_put_sync()
for every device right before and right after executing the subsystem-level
.resume() callback for it, respectively.
for every device right after executing the subsystem-level .resume_early()
callback and right after executing the subsystem-level .resume() callback
for it, respectively.
7. Generic subsystem callbacks

View File

@ -236,7 +236,7 @@ static int rpmsg_sample_probe(struct rpmsg_channel *rpdev)
return 0;
}
static void __devexit rpmsg_sample_remove(struct rpmsg_channel *rpdev)
static void rpmsg_sample_remove(struct rpmsg_channel *rpdev)
{
dev_info(&rpdev->dev, "rpmsg sample client driver is removed\n");
}
@ -253,7 +253,7 @@ static struct rpmsg_driver rpmsg_sample_client = {
.id_table = rpmsg_driver_sample_id_table,
.probe = rpmsg_sample_probe,
.callback = rpmsg_sample_cb,
.remove = __devexit_p(rpmsg_sample_remove),
.remove = rpmsg_sample_remove,
};
static int __init init(void)

View File

@ -345,7 +345,7 @@ SPI protocol drivers somewhat resemble platform device drivers:
},
.probe = CHIP_probe,
.remove = __devexit_p(CHIP_remove),
.remove = CHIP_remove,
.suspend = CHIP_suspend,
.resume = CHIP_resume,
};
@ -355,7 +355,7 @@ device whose board_info gave a modalias of "CHIP". Your probe() code
might look like this unless you're creating a device which is managing
a bus (appearing under /sys/class/spi_master).
static int __devinit CHIP_probe(struct spi_device *spi)
static int CHIP_probe(struct spi_device *spi)
{
struct CHIP *chip;
struct CHIP_platform_data *pdata;

View File

@ -38,6 +38,7 @@ show up in /proc/sys/kernel:
- l2cr [ PPC only ]
- modprobe ==> Documentation/debugging-modules.txt
- modules_disabled
- msg_next_id [ sysv ipc ]
- msgmax
- msgmnb
- msgmni
@ -62,7 +63,9 @@ show up in /proc/sys/kernel:
- rtsig-max
- rtsig-nr
- sem
- sem_next_id [ sysv ipc ]
- sg-big-buff [ generic SCSI device (sg) ]
- shm_next_id [ sysv ipc ]
- shm_rmid_forced
- shmall
- shmmax [ sysv ipc ]
@ -320,6 +323,22 @@ to false.
==============================================================
msg_next_id, sem_next_id, and shm_next_id:
These three toggles allows to specify desired id for next allocated IPC
object: message, semaphore or shared memory respectively.
By default they are equal to -1, which means generic allocation logic.
Possible values to set are in range {0..INT_MAX}.
Notes:
1) kernel doesn't guarantee, that new object will have desired id. So,
it's up to userspace, how to handle an object with "wrong" id.
2) Toggle with non-default value will be set back to -1 by kernel after
successful IPC object allocation.
==============================================================
nmi_watchdog:
Enables/Disables the NMI watchdog on x86 systems. When the value is
@ -542,6 +561,19 @@ are doing anyway :)
==============================================================
shmall:
This parameter sets the total amount of shared memory pages that
can be used system wide. Hence, SHMALL should always be at least
ceil(shmmax/PAGE_SIZE).
If you are not sure what the default PAGE_SIZE is on your Linux
system, you can run the following command:
# getconf PAGE_SIZE
==============================================================
shmmax:
This value can be used to query and set the run time limit

View File

@ -174,8 +174,7 @@ The recommended approach is as follows:
static atomic_t drv_instance = ATOMIC_INIT(0);
static int __devinit drv_probe(struct pci_dev *pdev,
const struct pci_device_id *pci_id)
static int drv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
{
...
state->instance = atomic_inc_return(&drv_instance) - 1;

View File

@ -182,8 +182,7 @@ int iterate(void *p)
static atomic_t drv_instance = ATOMIC_INIT(0);
static int __devinit drv_probe(struct pci_dev *pdev,
const struct pci_device_id *pci_id)
static int drv_probe(struct pci_dev *pdev, const struct pci_device_id *pci_id)
{
...
state->instance = atomic_inc_return(&drv_instance) - 1;

File diff suppressed because it is too large Load Diff

View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 8
SUBLEVEL = 0
EXTRAVERSION = -rc2
EXTRAVERSION = -rc4
NAME = Terrified Chipmunk
# *DOCUMENTATION*

View File

@ -9,8 +9,8 @@
#ifndef _ASM_AXP_PARPORT_H
#define _ASM_AXP_PARPORT_H 1
static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma);
static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma)
static int parport_pc_find_isa_ports (int autoirq, int autodma);
static int parport_pc_find_nonpci_ports (int autoirq, int autodma)
{
return parport_pc_find_isa_ports (autoirq, autodma);
}

View File

@ -59,13 +59,13 @@ struct pci_controller *pci_isa_hose;
* Quirks.
*/
static void __devinit quirk_isa_bridge(struct pci_dev *dev)
static void quirk_isa_bridge(struct pci_dev *dev)
{
dev->class = PCI_CLASS_BRIDGE_ISA << 8;
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_isa_bridge);
static void __devinit quirk_cypress(struct pci_dev *dev)
static void quirk_cypress(struct pci_dev *dev)
{
/* The Notorious Cy82C693 chip. */
@ -104,7 +104,7 @@ static void __devinit quirk_cypress(struct pci_dev *dev)
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, quirk_cypress);
/* Called for each device after PCI setup is done. */
static void __devinit pcibios_fixup_final(struct pci_dev *dev)
static void pcibios_fixup_final(struct pci_dev *dev)
{
unsigned int class = dev->class >> 8;
@ -198,8 +198,7 @@ subsys_initcall(pcibios_init);
#ifdef ALPHA_RESTORE_SRM_SETUP
static struct pdev_srm_saved_conf *srm_saved_configs;
void __devinit
pdev_save_srm_config(struct pci_dev *dev)
void pdev_save_srm_config(struct pci_dev *dev)
{
struct pdev_srm_saved_conf *tmp;
static int printed = 0;
@ -241,8 +240,7 @@ pci_restore_srm_config(void)
}
#endif
void __devinit
pcibios_fixup_bus(struct pci_bus *bus)
void pcibios_fixup_bus(struct pci_bus *bus)
{
struct pci_dev *dev = bus->self;

View File

@ -68,7 +68,7 @@ enum ipi_message_type {
};
/* Set to a secondary's cpuid when it comes online. */
static int smp_secondary_alive __devinitdata = 0;
static int smp_secondary_alive = 0;
int smp_num_probed; /* Internal processor count */
int smp_num_cpus = 1; /* Number that came online. */
@ -172,7 +172,7 @@ smp_callin(void)
}
/* Wait until hwrpb->txrdy is clear for cpu. Return -1 on timeout. */
static int __devinit
static int
wait_for_txrdy (unsigned long cpumask)
{
unsigned long timeout;
@ -468,7 +468,7 @@ smp_prepare_cpus(unsigned int max_cpus)
smp_num_cpus = smp_num_probed;
}
void __devinit
void
smp_prepare_boot_cpu(void)
{
}

View File

@ -303,7 +303,7 @@ titan_late_init(void)
}
static int __devinit
static int
titan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
u8 intline;

View File

@ -371,7 +371,6 @@ config ARCH_CNS3XXX
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
select ARCH_REQUIRE_GPIOLIB
select ARCH_USES_GETTIMEOFFSET
select AUTO_ZRELADDR
select CLKDEV_LOOKUP
select COMMON_CLK
@ -1230,6 +1229,7 @@ config ARM_ERRATA_430973
config ARM_ERRATA_458693
bool "ARM errata: Processor deadlock when a false hazard is created"
depends on CPU_V7
depends on !ARCH_MULTIPLATFORM
help
This option enables the workaround for the 458693 Cortex-A8 (r2p0)
erratum. For very specific sequences of memory operations, it is
@ -1243,6 +1243,7 @@ config ARM_ERRATA_458693
config ARM_ERRATA_460075
bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
depends on CPU_V7
depends on !ARCH_MULTIPLATFORM
help
This option enables the workaround for the 460075 Cortex-A8 (r2p0)
erratum. Any asynchronous access to the L2 cache may encounter a
@ -1255,6 +1256,7 @@ config ARM_ERRATA_460075
config ARM_ERRATA_742230
bool "ARM errata: DMB operation may be faulty"
depends on CPU_V7 && SMP
depends on !ARCH_MULTIPLATFORM
help
This option enables the workaround for the 742230 Cortex-A9
(r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
@ -1267,6 +1269,7 @@ config ARM_ERRATA_742230
config ARM_ERRATA_742231
bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
depends on CPU_V7 && SMP
depends on !ARCH_MULTIPLATFORM
help
This option enables the workaround for the 742231 Cortex-A9
(r2p0..r2p2) erratum. Under certain conditions, specific to the
@ -1317,6 +1320,7 @@ config PL310_ERRATA_727915
config ARM_ERRATA_743622
bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
depends on CPU_V7
depends on !ARCH_MULTIPLATFORM
help
This option enables the workaround for the 743622 Cortex-A9
(r2p*) erratum. Under very rare conditions, a faulty
@ -1330,6 +1334,7 @@ config ARM_ERRATA_743622
config ARM_ERRATA_751472
bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
depends on CPU_V7
depends on !ARCH_MULTIPLATFORM
help
This option enables the workaround for the 751472 Cortex-A9 (prior
to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the

View File

@ -155,6 +155,7 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
targets += dtbs
targets += $(dtb-y)
endif
# *.dtb used to be generated in the directory above. Clean out the

View File

@ -50,17 +50,19 @@
ranges;
serial@d0012000 {
compatible = "ns16550";
compatible = "snps,dw-apb-uart";
reg = <0xd0012000 0x100>;
reg-shift = <2>;
interrupts = <41>;
reg-io-width = <4>;
status = "disabled";
};
serial@d0012100 {
compatible = "ns16550";
compatible = "snps,dw-apb-uart";
reg = <0xd0012100 0x100>;
reg-shift = <2>;
interrupts = <42>;
reg-io-width = <4>;
status = "disabled";
};

View File

@ -34,7 +34,14 @@
reg = <0>;
clocks = <&cpuclk 0>;
};
}
cpu@1 {
device_type = "cpu";
compatible = "marvell,sheeva-v7";
reg = <1>;
clocks = <&cpuclk 1>;
};
};
soc {
pinctrl {

View File

@ -85,5 +85,13 @@
#interrupts-cells = <2>;
interrupts = <24>;
};
ethernet@d0034000 {
compatible = "marvell,armada-370-neta";
reg = <0xd0034000 0x2500>;
interrupts = <14>;
clocks = <&gateclk 1>;
status = "disabled";
};
};
};

View File

@ -100,5 +100,13 @@
#interrupts-cells = <2>;
interrupts = <24>;
};
ethernet@d0034000 {
compatible = "marvell,armada-370-neta";
reg = <0xd0034000 0x2500>;
interrupts = <14>;
clocks = <&gateclk 1>;
status = "disabled";
};
};
};

View File

@ -42,17 +42,19 @@
soc {
serial@d0012200 {
compatible = "ns16550";
compatible = "snps,dw-apb-uart";
reg = <0xd0012200 0x100>;
reg-shift = <2>;
interrupts = <43>;
reg-io-width = <4>;
status = "disabled";
};
serial@d0012300 {
compatible = "ns16550";
compatible = "snps,dw-apb-uart";
reg = <0xd0012300 0x100>;
reg-shift = <2>;
interrupts = <44>;
reg-io-width = <4>;
status = "disabled";
};
@ -93,14 +95,6 @@
status = "disabled";
};
ethernet@d0034000 {
compatible = "marvell,armada-370-neta";
reg = <0xd0034000 0x2500>;
interrupts = <14>;
clocks = <&gateclk 1>;
status = "disabled";
};
xor@d0060900 {
compatible = "marvell,orion-xor";
reg = <0xd0060900 0x100

View File

@ -306,6 +306,22 @@
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<1 16 0x1 0x0 /* PB16 periph A */
1 17 0x1 0x0 /* PB17 periph A */
1 18 0x1 0x0>; /* PB18 periph A */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<1 19 0x1 0x0 /* PB19 periph A */
1 20 0x1 0x0 /* PB20 periph A */
1 21 0x1 0x0>; /* PB21 periph A */
};
};
pioA: gpio@fffff400 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@ -450,6 +466,8 @@
compatible = "atmel,at91rm9200-ssc";
reg = <0xfffbc000 0x4000>;
interrupts = <14 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};

View File

@ -271,6 +271,38 @@
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<1 0 0x2 0x0 /* PB0 periph B */
1 1 0x2 0x0 /* PB1 periph B */
1 2 0x2 0x0>; /* PB2 periph B */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<1 3 0x2 0x0 /* PB3 periph B */
1 4 0x2 0x0 /* PB4 periph B */
1 5 0x2 0x0>; /* PB5 periph B */
};
};
ssc1 {
pinctrl_ssc1_tx: ssc1_tx-0 {
atmel,pins =
<1 6 0x1 0x0 /* PB6 periph A */
1 7 0x1 0x0 /* PB7 periph A */
1 8 0x1 0x0>; /* PB8 periph A */
};
pinctrl_ssc1_rx: ssc1_rx-0 {
atmel,pins =
<1 9 0x1 0x0 /* PB9 periph A */
1 10 0x1 0x0 /* PB10 periph A */
1 11 0x1 0x0>; /* PB11 periph A */
};
};
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@ -368,6 +400,8 @@
compatible = "atmel,at91rm9200-ssc";
reg = <0xfff98000 0x4000>;
interrupts = <16 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
@ -375,6 +409,8 @@
compatible = "atmel,at91rm9200-ssc";
reg = <0xfff9c000 0x4000>;
interrupts = <17 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled";
};

View File

@ -290,6 +290,38 @@
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<3 0 0x1 0x0 /* PD0 periph A */
3 1 0x1 0x0 /* PD1 periph A */
3 2 0x1 0x0>; /* PD2 periph A */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<3 3 0x1 0x0 /* PD3 periph A */
3 4 0x1 0x0 /* PD4 periph A */
3 5 0x1 0x0>; /* PD5 periph A */
};
};
ssc1 {
pinctrl_ssc1_tx: ssc1_tx-0 {
atmel,pins =
<3 10 0x1 0x0 /* PD10 periph A */
3 11 0x1 0x0 /* PD11 periph A */
3 12 0x1 0x0>; /* PD12 periph A */
};
pinctrl_ssc1_rx: ssc1_rx-0 {
atmel,pins =
<3 13 0x1 0x0 /* PD13 periph A */
3 14 0x1 0x0 /* PD14 periph A */
3 15 0x1 0x0>; /* PD15 periph A */
};
};
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
@ -425,6 +457,8 @@
compatible = "atmel,at91sam9g45-ssc";
reg = <0xfff9c000 0x4000>;
interrupts = <16 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
@ -432,6 +466,8 @@
compatible = "atmel,at91sam9g45-ssc";
reg = <0xfffa0000 0x4000>;
interrupts = <17 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
status = "disabled";
};

View File

@ -28,6 +28,7 @@
tcb1 = &tcb1;
i2c0 = &i2c0;
i2c1 = &i2c1;
ssc0 = &ssc0;
};
cpus {
cpu@0 {
@ -244,6 +245,22 @@
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<0 24 0x2 0x0 /* PA24 periph B */
0 25 0x2 0x0 /* PA25 periph B */
0 26 0x2 0x0>; /* PA26 periph B */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<0 27 0x2 0x0 /* PA27 periph B */
0 28 0x2 0x0 /* PA28 periph B */
0 29 0x2 0x0>; /* PA29 periph B */
};
};
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@ -294,6 +311,15 @@
status = "disabled";
};
ssc0: ssc@f0010000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0010000 0x4000>;
interrupts = <28 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
usart0: serial@f801c000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf801c000 0x4000>;

View File

@ -88,13 +88,6 @@
interrupts = <1 4 7>;
};
ssc0: ssc@f0010000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0010000 0x4000>;
interrupts = <28 4 5>;
status = "disabled";
};
tcb0: timer@f8008000 {
compatible = "atmel,at91sam9x5-tcb";
reg = <0xf8008000 0x100>;
@ -290,6 +283,22 @@
};
};
ssc0 {
pinctrl_ssc0_tx: ssc0_tx-0 {
atmel,pins =
<0 24 0x2 0x0 /* PA24 periph B */
0 25 0x2 0x0 /* PA25 periph B */
0 26 0x2 0x0>; /* PA26 periph B */
};
pinctrl_ssc0_rx: ssc0_rx-0 {
atmel,pins =
<0 27 0x2 0x0 /* PA27 periph B */
0 28 0x2 0x0 /* PA28 periph B */
0 29 0x2 0x0>; /* PA29 periph B */
};
};
pioA: gpio@fffff400 {
compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
reg = <0xfffff400 0x200>;
@ -333,6 +342,15 @@
};
};
ssc0: ssc@f0010000 {
compatible = "atmel,at91sam9g45-ssc";
reg = <0xf0010000 0x4000>;
interrupts = <28 4 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
status = "disabled";
};
mmc0: mmc@f0008000 {
compatible = "atmel,hsmci";
reg = <0xf0008000 0x600>;

View File

@ -170,7 +170,9 @@
gpio-bank = <8>;
};
pinctrl {
pinctrl@80157000 {
// This is actually the PRCMU base address
reg = <0x80157000 0x2000>;
compatible = "stericsson,nmk_pinctrl";
};

View File

@ -117,6 +117,7 @@
pinctrl: pinctrl@d0200 {
compatible = "marvell,dove-pinctrl";
reg = <0xd0200 0x10>;
clocks = <&gate_clk 22>;
};
spi0: spi@10600 {

View File

@ -32,6 +32,7 @@
cpu@0 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <0>;
clocks = <&a9pll>;
clock-names = "cpu";
@ -39,6 +40,7 @@
cpu@1 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <1>;
clocks = <&a9pll>;
clock-names = "cpu";
@ -46,6 +48,7 @@
cpu@2 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <2>;
clocks = <&a9pll>;
clock-names = "cpu";
@ -53,6 +56,7 @@
cpu@3 {
compatible = "arm,cortex-a15";
device_type = "cpu";
reg = <3>;
clocks = <&a9pll>;
clock-names = "cpu";

View File

@ -26,7 +26,7 @@
};
chosen {
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc";
};
sdhci@12530000 {

View File

@ -574,7 +574,7 @@
hdmi {
compatible = "samsung,exynos5-hdmi";
reg = <0x14530000 0x100000>;
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
};

View File

@ -21,7 +21,7 @@
};
chosen {
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC2,115200 init=/linuxrc";
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x81000000,8M console=ttySAC0,115200 init=/linuxrc";
};
spi {

View File

@ -30,33 +30,37 @@
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
cpu@900 {
compatible = "arm,cortex-a9";
reg = <0>;
device_type = "cpu";
reg = <0x900>;
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
};
cpu@1 {
cpu@901 {
compatible = "arm,cortex-a9";
reg = <1>;
device_type = "cpu";
reg = <0x901>;
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
};
cpu@2 {
cpu@902 {
compatible = "arm,cortex-a9";
reg = <2>;
device_type = "cpu";
reg = <0x902>;
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";
};
cpu@3 {
cpu@903 {
compatible = "arm,cortex-a9";
reg = <3>;
device_type = "cpu";
reg = <0x903>;
next-level-cache = <&L2>;
clocks = <&a9pll>;
clock-names = "cpu";

View File

@ -39,17 +39,17 @@
hog_pins_a: hog@0 {
reg = <0>;
fsl,pinmux-ids = <
0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
fsl,pull-up = <0>;
};
led_pin_gpio0_17: led_gpio0_17@0 {
led_pin_gpio2_1: led_gpio2_1@0 {
reg = <0>;
fsl,pinmux-ids = <
0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */
0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */
>;
fsl,drive-strength = <0>;
fsl,voltage = <1>;
@ -110,7 +110,7 @@
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&led_pin_gpio0_17>;
pinctrl-0 = <&led_pin_gpio2_1>;
user {
label = "green";

View File

@ -14,7 +14,7 @@
/ {
model = "Buglabs i.MX31 Bug 1.x";
compatible = "fsl,imx31-bug", "fsl,imx31";
compatible = "buglabs,imx31-bug", "fsl,imx31";
memory {
reg = <0x80000000 0x8000000>; /* 128M */

View File

@ -492,7 +492,7 @@
compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
reg = <0x53fcc000 0x4000>;
interrupts = <83>;
clocks = <&clks 158>, <&clks 157>;
clocks = <&clks 87>, <&clks 86>;
clock-names = "ipg", "per";
status = "disabled";
};

View File

@ -39,6 +39,7 @@
#size-cells = <0>;
interrupts = <32>;
clock-frequency = <100000>;
clocks = <&gate_clk 7>;
status = "disabled";
};
};

View File

@ -82,4 +82,21 @@
gpios = <&gpio1 16 1>;
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
sata0_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "SATA0 Power";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
gpio = <&gpio1 4 0>;
};
};
};

View File

@ -144,6 +144,7 @@
compatible = "marvell,orion-ehci";
reg = <0x50000 0x1000>;
interrupts = <19>;
clocks = <&gate_clk 3>;
status = "okay";
};

View File

@ -686,8 +686,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
* %-EINVAL no platform data passed
* %0 successful.
*/
static int __devinit
__sa1111_probe(struct device *me, struct resource *mem, int irq)
static int __sa1111_probe(struct device *me, struct resource *mem, int irq)
{
struct sa1111_platform_data *pd = me->platform_data;
struct sa1111 *sachip;
@ -1011,7 +1010,7 @@ static int sa1111_resume(struct platform_device *dev)
#define sa1111_resume NULL
#endif
static int __devinit sa1111_probe(struct platform_device *pdev)
static int sa1111_probe(struct platform_device *pdev)
{
struct resource *mem;
int irq;

View File

@ -176,7 +176,7 @@ static int scoop_resume(struct platform_device *dev)
#define scoop_resume NULL
#endif
static int __devinit scoop_probe(struct platform_device *pdev)
static int scoop_probe(struct platform_device *pdev)
{
struct scoop_dev *devptr;
struct scoop_config *inf;
@ -243,7 +243,7 @@ err_ioremap:
return ret;
}
static int __devexit scoop_remove(struct platform_device *pdev)
static int scoop_remove(struct platform_device *pdev)
{
struct scoop_dev *sdev = platform_get_drvdata(pdev);
int ret;
@ -268,7 +268,7 @@ static int __devexit scoop_remove(struct platform_device *pdev)
static struct platform_driver scoop_driver = {
.probe = scoop_probe,
.remove = __devexit_p(scoop_remove),
.remove = scoop_remove,
.suspend = scoop_suspend,
.resume = scoop_resume,
.driver = {

View File

@ -206,6 +206,7 @@ static void __init vic_register(void __iomem *base, unsigned int irq,
struct device_node *node)
{
struct vic_device *v;
int i;
if (vic_id >= ARRAY_SIZE(vic_devices)) {
printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
@ -220,6 +221,10 @@ static void __init vic_register(void __iomem *base, unsigned int irq,
vic_id++;
v->domain = irq_domain_add_simple(node, fls(valid_sources), irq,
&vic_irqdomain_ops, v);
/* create an IRQ mapping for each valid IRQ */
for (i = 0; i < fls(valid_sources); i++)
if (valid_sources & (1 << i))
irq_create_mapping(v->domain, i);
}
static void vic_ack_irq(struct irq_data *d)
@ -416,9 +421,9 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent)
return -EIO;
/*
* Passing -1 as first IRQ makes the simple domain allocate descriptors
* Passing 0 as first IRQ makes the simple domain allocate descriptors
*/
__vic_init(regs, -1, ~0, ~0, node);
__vic_init(regs, 0, ~0, ~0, node);
return 0;
}

View File

@ -33,9 +33,7 @@ CONFIG_MVNETA=y
CONFIG_MARVELL_PHY=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_I2C=y
CONFIG_I2C_MV64XXX=y
CONFIG_SERIAL_8250_DW=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_USB_SUPPORT is not set

View File

@ -78,7 +78,7 @@ void pcibios_report_status(u_int status_mask, int warn)
* Bug 3 is responsible for the sound DMA grinding to a halt. We now
* live with bug 2.
*/
static void __devinit pci_fixup_83c553(struct pci_dev *dev)
static void pci_fixup_83c553(struct pci_dev *dev)
{
/*
* Set memory region to start at address 0, and enable IO
@ -130,7 +130,7 @@ static void __devinit pci_fixup_83c553(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND, PCI_DEVICE_ID_WINBOND_83C553, pci_fixup_83c553);
static void __devinit pci_fixup_unassign(struct pci_dev *dev)
static void pci_fixup_unassign(struct pci_dev *dev)
{
dev->resource[0].end -= dev->resource[0].start;
dev->resource[0].start = 0;
@ -142,7 +142,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_WINBOND2, PCI_DEVICE_ID_WINBOND2_89C940F,
* if it is the host bridge by marking it as such. These resources are of
* no consequence to the PCI layer (they are handled elsewhere).
*/
static void __devinit pci_fixup_dec21285(struct pci_dev *dev)
static void pci_fixup_dec21285(struct pci_dev *dev)
{
int i;
@ -161,7 +161,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21285, pci_fixup_d
/*
* PCI IDE controllers use non-standard I/O port decoding, respect it.
*/
static void __devinit pci_fixup_ide_bases(struct pci_dev *dev)
static void pci_fixup_ide_bases(struct pci_dev *dev)
{
struct resource *r;
int i;
@ -182,7 +182,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pci_fixup_ide_bases);
/*
* Put the DEC21142 to sleep
*/
static void __devinit pci_fixup_dec21142(struct pci_dev *dev)
static void pci_fixup_dec21142(struct pci_dev *dev)
{
pci_write_config_dword(dev, 0x40, 0x80000000);
}
@ -204,7 +204,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_DEC, PCI_DEVICE_ID_DEC_21142, pci_fixup_d
* functional. However, The CY82C693U _does not work_ in bus
* master mode without locking the PCI bus solid.
*/
static void __devinit pci_fixup_cy82c693(struct pci_dev *dev)
static void pci_fixup_cy82c693(struct pci_dev *dev)
{
if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE) {
u32 base0, base1;
@ -254,7 +254,7 @@ static void __devinit pci_fixup_cy82c693(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693);
static void __devinit pci_fixup_it8152(struct pci_dev *dev)
static void pci_fixup_it8152(struct pci_dev *dev)
{
int i;
/* fixup for ITE 8152 devices */
@ -361,9 +361,7 @@ void pcibios_fixup_bus(struct pci_bus *bus)
printk(KERN_INFO "PCI: bus%d: Fast back to back transfers %sabled\n",
bus->number, (features & PCI_COMMAND_FAST_BACK) ? "en" : "dis");
}
#ifdef CONFIG_HOTPLUG
EXPORT_SYMBOL(pcibios_fixup_bus);
#endif
/*
* Swizzle the device pin each time we cross a bridge. If a platform does
@ -380,7 +378,7 @@ EXPORT_SYMBOL(pcibios_fixup_bus);
* PCI standard swizzle is implemented on plug-in cards and Cardbus based
* PCI extenders, so it can not be ignored.
*/
static u8 __devinit pcibios_swizzle(struct pci_dev *dev, u8 *pin)
static u8 pcibios_swizzle(struct pci_dev *dev, u8 *pin)
{
struct pci_sys_data *sys = dev->sysdata;
int slot, oldpin = *pin;

View File

@ -339,7 +339,7 @@ static struct miscdevice etb_miscdev = {
.fops = &etb_fops,
};
static int __devinit etb_probe(struct amba_device *dev, const struct amba_id *id)
static int etb_probe(struct amba_device *dev, const struct amba_id *id)
{
struct tracectx *t = &tracer;
int ret = 0;
@ -531,7 +531,7 @@ static ssize_t trace_mode_store(struct kobject *kobj,
static struct kobj_attribute trace_mode_attr =
__ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store);
static int __devinit etm_probe(struct amba_device *dev, const struct amba_id *id)
static int etm_probe(struct amba_device *dev, const struct amba_id *id)
{
struct tracectx *t = &tracer;
int ret = 0;

View File

@ -132,7 +132,7 @@ static int cpu_pmu_request_irq(struct arm_pmu *cpu_pmu, irq_handler_t handler)
return 0;
}
static void __devinit cpu_pmu_init(struct arm_pmu *cpu_pmu)
static void cpu_pmu_init(struct arm_pmu *cpu_pmu)
{
int cpu;
for_each_possible_cpu(cpu) {
@ -178,7 +178,7 @@ static struct notifier_block __cpuinitdata cpu_pmu_hotplug_notifier = {
/*
* PMU platform driver and devicetree bindings.
*/
static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = {
static struct of_device_id cpu_pmu_of_device_ids[] = {
{.compatible = "arm,cortex-a15-pmu", .data = armv7_a15_pmu_init},
{.compatible = "arm,cortex-a9-pmu", .data = armv7_a9_pmu_init},
{.compatible = "arm,cortex-a8-pmu", .data = armv7_a8_pmu_init},
@ -190,7 +190,7 @@ static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = {
{},
};
static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = {
static struct platform_device_id cpu_pmu_plat_device_ids[] = {
{.name = "arm-pmu"},
{},
};
@ -198,7 +198,7 @@ static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = {
/*
* CPU PMU identification and probing.
*/
static int __devinit probe_current_pmu(struct arm_pmu *pmu)
static int probe_current_pmu(struct arm_pmu *pmu)
{
int cpu = get_cpu();
unsigned long cpuid = read_cpuid_id();
@ -252,7 +252,7 @@ static int __devinit probe_current_pmu(struct arm_pmu *pmu)
return ret;
}
static int __devinit cpu_pmu_device_probe(struct platform_device *pdev)
static int cpu_pmu_device_probe(struct platform_device *pdev)
{
const struct of_device_id *of_id;
int (*init_fn)(struct arm_pmu *);

View File

@ -653,7 +653,7 @@ static int armv6_map_event(struct perf_event *event)
&armv6_perf_cache_map, 0xFF);
}
static int __devinit armv6pmu_init(struct arm_pmu *cpu_pmu)
static int armv6pmu_init(struct arm_pmu *cpu_pmu)
{
cpu_pmu->name = "v6";
cpu_pmu->handle_irq = armv6pmu_handle_irq;
@ -685,7 +685,7 @@ static int armv6mpcore_map_event(struct perf_event *event)
&armv6mpcore_perf_cache_map, 0xFF);
}
static int __devinit armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu)
{
cpu_pmu->name = "v6mpcore";
cpu_pmu->handle_irq = armv6pmu_handle_irq;

View File

@ -1226,7 +1226,7 @@ static void armv7pmu_init(struct arm_pmu *cpu_pmu)
cpu_pmu->max_period = (1LLU << 32) - 1;
};
static u32 __devinit armv7_read_num_pmnc_events(void)
static u32 armv7_read_num_pmnc_events(void)
{
u32 nb_cnt;
@ -1237,7 +1237,7 @@ static u32 __devinit armv7_read_num_pmnc_events(void)
return nb_cnt + 1;
}
static int __devinit armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
{
armv7pmu_init(cpu_pmu);
cpu_pmu->name = "ARMv7 Cortex-A8";
@ -1246,7 +1246,7 @@ static int __devinit armv7_a8_pmu_init(struct arm_pmu *cpu_pmu)
return 0;
}
static int __devinit armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
{
armv7pmu_init(cpu_pmu);
cpu_pmu->name = "ARMv7 Cortex-A9";
@ -1255,7 +1255,7 @@ static int __devinit armv7_a9_pmu_init(struct arm_pmu *cpu_pmu)
return 0;
}
static int __devinit armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
{
armv7pmu_init(cpu_pmu);
cpu_pmu->name = "ARMv7 Cortex-A5";
@ -1264,7 +1264,7 @@ static int __devinit armv7_a5_pmu_init(struct arm_pmu *cpu_pmu)
return 0;
}
static int __devinit armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
{
armv7pmu_init(cpu_pmu);
cpu_pmu->name = "ARMv7 Cortex-A15";
@ -1274,7 +1274,7 @@ static int __devinit armv7_a15_pmu_init(struct arm_pmu *cpu_pmu)
return 0;
}
static int __devinit armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu)
{
armv7pmu_init(cpu_pmu);
cpu_pmu->name = "ARMv7 Cortex-A7";

View File

@ -440,7 +440,7 @@ static int xscale_map_event(struct perf_event *event)
&xscale_perf_cache_map, 0xFF);
}
static int __devinit xscale1pmu_init(struct arm_pmu *cpu_pmu)
static int xscale1pmu_init(struct arm_pmu *cpu_pmu)
{
cpu_pmu->name = "xscale1";
cpu_pmu->handle_irq = xscale1pmu_handle_irq;
@ -810,7 +810,7 @@ static inline void xscale2pmu_write_counter(struct perf_event *event, u32 val)
}
}
static int __devinit xscale2pmu_init(struct arm_pmu *cpu_pmu)
static int xscale2pmu_init(struct arm_pmu *cpu_pmu)
{
cpu_pmu->name = "xscale2";
cpu_pmu->handle_irq = xscale2pmu_handle_irq;

View File

@ -358,7 +358,7 @@ static int cpld_video_probe(struct i2c_client *client,
return 0;
}
static int __devexit cpld_video_remove(struct i2c_client *client)
static int cpld_video_remove(struct i2c_client *client)
{
cpld_client = NULL;
return 0;

View File

@ -256,7 +256,7 @@ static int cdce_probe(struct i2c_client *client,
return 0;
}
static int __devexit cdce_remove(struct i2c_client *client)
static int cdce_remove(struct i2c_client *client)
{
cdce_i2c_client = NULL;
return 0;
@ -274,7 +274,7 @@ static struct i2c_driver cdce_driver = {
.name = "cdce949",
},
.probe = cdce_probe,
.remove = __devexit_p(cdce_remove),
.remove = cdce_remove,
.id_table = cdce_id,
};

View File

@ -135,7 +135,7 @@ static struct pci_ops pcie_ops = {
.write = pcie_wr_conf,
};
static void __devinit rc_pci_fixup(struct pci_dev *dev)
static void rc_pci_fixup(struct pci_dev *dev)
{
/*
* Prevent enumeration of root complex.

View File

@ -74,6 +74,8 @@ config SOC_EXYNOS5440
depends on ARCH_EXYNOS5
select ARM_ARCH_TIMER
select AUTO_ZRELADDR
select PINCTRL
select PINCTRL_EXYNOS5440
help
Enable EXYNOS5440 SoC support

View File

@ -424,11 +424,18 @@ static void __init exynos5_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
/* EXYNOS5440 can support only common clock framework */
if (soc_is_exynos5440())
return;
#ifdef CONFIG_SOC_EXYNOS5250
s3c24xx_register_baseclocks(xtal);
s5p_register_clocks(xtal);
exynos5_register_clocks();
exynos5_setup_clocks();
#endif
}
#define COMBINER_ENABLE_SET 0x0

View File

@ -135,7 +135,7 @@ static struct sys_timer highbank_timer = {
static void highbank_power_off(void)
{
hignbank_set_pwr_shutdown();
highbank_set_pwr_shutdown();
while (1)
cpu_do_idle();

View File

@ -30,7 +30,7 @@ void __ref highbank_cpu_die(unsigned int cpu)
{
flush_cache_all();
highbank_set_cpu_jump(cpu, secondary_startup);
highbank_set_cpu_jump(cpu, phys_to_virt(0));
highbank_set_core_pwr();
cpu_do_idle();

View File

@ -32,6 +32,7 @@ static void __cpuinit highbank_secondary_init(unsigned int cpu)
static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
highbank_set_cpu_jump(cpu, secondary_startup);
gic_raise_softirq(cpumask_of(cpu), 0);
return 0;
}
@ -61,19 +62,8 @@ static void __init highbank_smp_init_cpus(void)
static void __init highbank_smp_prepare_cpus(unsigned int max_cpus)
{
int i;
if (scu_base_addr)
scu_enable(scu_base_addr);
/*
* Write the address of secondary startup into the jump table
* The cores are in wfi and wait until they receive a soft interrupt
* and a non-zero value to jump to. Then the secondary CPU branches
* to this address.
*/
for (i = 1; i < max_cpus; i++)
highbank_set_cpu_jump(i, secondary_startup);
}
struct smp_operations highbank_smp_ops __initdata = {

View File

@ -14,10 +14,12 @@
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/cpu_pm.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/suspend.h>
#include <asm/cacheflush.h>
#include <asm/proc-fns.h>
#include <asm/suspend.h>
@ -26,16 +28,31 @@
static int highbank_suspend_finish(unsigned long val)
{
outer_flush_all();
outer_disable();
highbank_set_pwr_suspend();
cpu_do_idle();
highbank_clear_pwr_request();
return 0;
}
static int highbank_pm_enter(suspend_state_t state)
{
hignbank_set_pwr_suspend();
cpu_pm_enter();
cpu_cluster_pm_enter();
highbank_set_cpu_jump(0, cpu_resume);
cpu_suspend(0, highbank_suspend_finish);
cpu_cluster_pm_exit();
cpu_pm_exit();
highbank_smc1(0x102, 0x1);
if (scu_base_addr)
scu_enable(scu_base_addr);
return 0;
}

View File

@ -44,28 +44,43 @@ static inline void highbank_set_core_pwr(void)
writel_relaxed(1, sregs_base + SREG_CPU_PWR_CTRL(cpu));
}
static inline void hignbank_set_pwr_suspend(void)
static inline void highbank_clear_core_pwr(void)
{
int cpu = cpu_logical_map(smp_processor_id());
if (scu_base_addr)
scu_power_mode(scu_base_addr, SCU_PM_NORMAL);
else
writel_relaxed(0, sregs_base + SREG_CPU_PWR_CTRL(cpu));
}
static inline void highbank_set_pwr_suspend(void)
{
writel(HB_PWR_SUSPEND, sregs_base + HB_SREG_A9_PWR_REQ);
highbank_set_core_pwr();
}
static inline void hignbank_set_pwr_shutdown(void)
static inline void highbank_set_pwr_shutdown(void)
{
writel(HB_PWR_SHUTDOWN, sregs_base + HB_SREG_A9_PWR_REQ);
highbank_set_core_pwr();
}
static inline void hignbank_set_pwr_soft_reset(void)
static inline void highbank_set_pwr_soft_reset(void)
{
writel(HB_PWR_SOFT_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
highbank_set_core_pwr();
}
static inline void hignbank_set_pwr_hard_reset(void)
static inline void highbank_set_pwr_hard_reset(void)
{
writel(HB_PWR_HARD_RESET, sregs_base + HB_SREG_A9_PWR_REQ);
highbank_set_core_pwr();
}
static inline void highbank_clear_pwr_request(void)
{
writel(~0UL, sregs_base + HB_SREG_A9_PWR_REQ);
highbank_clear_core_pwr();
}
#endif

View File

@ -22,9 +22,9 @@
void highbank_restart(char mode, const char *cmd)
{
if (mode == 'h')
hignbank_set_pwr_hard_reset();
highbank_set_pwr_hard_reset();
else
hignbank_set_pwr_soft_reset();
highbank_set_pwr_soft_reset();
while (1)
cpu_do_idle();

View File

@ -841,8 +841,6 @@ config SOC_IMX6Q
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
select ARM_CPU_SUSPEND if PM
select ARM_ERRATA_743622
select ARM_ERRATA_751472
select ARM_ERRATA_754322
select ARM_ERRATA_764369 if SMP
select ARM_ERRATA_775420

View File

@ -254,9 +254,9 @@ int __init mx25_clocks_init(void)
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
/* i.mx25 has the i.mx35 type cspi */
clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");

View File

@ -236,9 +236,9 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0");
clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27");
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");

View File

@ -139,9 +139,9 @@ int __init mx31_clocks_init(unsigned long fref)
clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27");
clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
/* i.mx31 has the i.mx21 type uart */
clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");

View File

@ -251,9 +251,9 @@ int __init mx35_clocks_init()
clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27");
clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");

View File

@ -269,9 +269,9 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2");
clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2");
clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2");
clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
clk_register_clkdev(clk[usboh3_per_gate], "per", "imx-udc-mx51");
clk_register_clkdev(clk[usboh3_gate], "ipg", "imx-udc-mx51");
clk_register_clkdev(clk[usboh3_gate], "ahb", "imx-udc-mx51");
clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand");
clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");

View File

@ -188,7 +188,7 @@ static struct cpufreq_driver mxc_driver = {
.name = "imx",
};
static int __devinit mxc_cpufreq_driver_init(void)
static int mxc_cpufreq_driver_init(void)
{
return cpufreq_register_driver(&mxc_driver);
}

View File

@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan(
#include <linux/fsl_devices.h>
struct imx_fsl_usb2_udc_data {
const char *devid;
resource_size_t iobase;
resource_size_t irq;
};

View File

@ -11,35 +11,36 @@
#include "../hardware.h"
#include "devices-common.h"
#define imx_fsl_usb2_udc_data_entry_single(soc) \
#define imx_fsl_usb2_udc_data_entry_single(soc, _devid) \
{ \
.devid = _devid, \
.iobase = soc ## _USB_OTG_BASE_ADDR, \
.irq = soc ## _INT_USB_OTG, \
}
#ifdef CONFIG_SOC_IMX25
const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX25);
imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX25 */
#ifdef CONFIG_SOC_IMX27
const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX27);
imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX27 */
#ifdef CONFIG_SOC_IMX31
const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX31);
imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX31 */
#ifdef CONFIG_SOC_IMX35
const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX35);
imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
#endif /* ifdef CONFIG_SOC_IMX35 */
#ifdef CONFIG_SOC_IMX51
const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
imx_fsl_usb2_udc_data_entry_single(MX51);
imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
#endif
struct platform_device *__init imx_add_fsl_usb2_udc(
@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc(
.flags = IORESOURCE_IRQ,
},
};
return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
return imx_add_platform_device_dmamask(data->devid, -1,
res, ARRAY_SIZE(res),
pdata, sizeof(*pdata), DMA_BIT_MASK(32));
}

View File

@ -21,7 +21,7 @@
#define BP_MMDC_MAPSR_PSD 0
#define BP_MMDC_MAPSR_PSS 4
static int __devinit imx_mmdc_probe(struct platform_device *pdev)
static int imx_mmdc_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
void __iomem *mmdc_base, *reg;

View File

@ -504,7 +504,7 @@ iop13xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
/* Scan an IOP13XX PCI bus. nr selects which ATU we use.
*/
struct pci_bus * __devinit iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys)
{
int which_atu;
struct pci_bus *bus = NULL;

View File

@ -67,6 +67,10 @@ static void __init kirkwood_legacy_clk_init(void)
orion_clkdev_add(NULL, "mv643xx_eth_port.1",
of_clk_get_from_provider(&clkspec));
clkspec.args[0] = CGC_BIT_SDIO;
orion_clkdev_add(NULL, "mvsdio",
of_clk_get_from_provider(&clkspec));
}
static void __init kirkwood_of_clk_init(void)

View File

@ -64,8 +64,6 @@ static unsigned int topkick_mpp_config[] __initdata = {
0
};
#define TOPKICK_SATA0_PWR_ENABLE 36
void __init usi_topkick_init(void)
{
/*
@ -73,8 +71,6 @@ void __init usi_topkick_init(void)
*/
kirkwood_mpp_conf(topkick_mpp_config);
/* SATA0 power enable */
gpio_set_value(TOPKICK_SATA0_PWR_ENABLE, 1);
kirkwood_ge00_init(&topkick_ge00_data);
kirkwood_sdio_init(&topkick_mvsdio_data);

View File

@ -214,7 +214,7 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys)
* PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
* the device. Decoding setup is handled by the orion code.
*/
static void __devinit rc_pci_fixup(struct pci_dev *dev)
static void rc_pci_fixup(struct pci_dev *dev)
{
if (dev->bus->parent == NULL && dev->devfn == 0) {
int i;

View File

@ -92,7 +92,7 @@ static struct i2c_board_info acs5k_i2c_devs[] __initdata = {
},
};
static void __devinit acs5k_i2c_init(void)
static void acs5k_i2c_init(void)
{
/* The gpio interface */
platform_device_register(&acs5k_i2c_device);

View File

@ -61,7 +61,7 @@ struct gen_pool *sram_get_gpool(char *pool_name)
}
EXPORT_SYMBOL(sram_get_gpool);
static int __devinit sram_probe(struct platform_device *pdev)
static int sram_probe(struct platform_device *pdev)
{
struct sram_platdata *pdata = pdev->dev.platform_data;
struct sram_bank_info *info;
@ -125,7 +125,7 @@ out:
return ret;
}
static int __devexit sram_remove(struct platform_device *pdev)
static int sram_remove(struct platform_device *pdev)
{
struct sram_bank_info *info;

View File

@ -120,7 +120,7 @@ int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2)
* and unknown state. This function should be called early to
* wait on the ARM9.
*/
void __devinit proc_comm_boot_wait(void)
void proc_comm_boot_wait(void)
{
void __iomem *base = MSM_SHARED_RAM_BASE;

View File

@ -988,7 +988,7 @@ int smd_core_init(void)
return 0;
}
static int __devinit msm_smd_probe(struct platform_device *pdev)
static int msm_smd_probe(struct platform_device *pdev)
{
/*
* If we haven't waited for the ARM9 to boot up till now,

View File

@ -173,7 +173,7 @@ static struct pci_ops pcie_ops = {
.write = pcie_wr_conf,
};
static void __devinit rc_pci_fixup(struct pci_dev *dev)
static void rc_pci_fixup(struct pci_dev *dev)
{
/*
* Prevent enumeration of root complex.

View File

@ -27,7 +27,6 @@
#include <linux/pinctrl/machine.h>
#include <linux/platform_data/pinctrl-nomadik.h>
#include <linux/platform_data/clocksource-nomadik-mtu.h>
#include <linux/platform_data/mtd-nomadik-nand.h>
#include <asm/hardware/vic.h>
#include <asm/sizes.h>
#include <asm/mach-types.h>

View File

@ -22,49 +22,49 @@
#include <mach/hardware.h>
#define IRQ_VIC_START 1 /* first VIC interrupt is 1 */
#define IRQ_VIC_START 32 /* first VIC interrupt is 1 */
/*
* Interrupt numbers generic for all Nomadik Chip cuts
*/
#define IRQ_WATCHDOG 1
#define IRQ_SOFTINT 2
#define IRQ_CRYPTO 3
#define IRQ_OWM 4
#define IRQ_MTU0 5
#define IRQ_MTU1 6
#define IRQ_GPIO0 7
#define IRQ_GPIO1 8
#define IRQ_GPIO2 9
#define IRQ_GPIO3 10
#define IRQ_RTC_RTT 11
#define IRQ_SSP 12
#define IRQ_UART0 13
#define IRQ_DMA1 14
#define IRQ_CLCD_MDIF 15
#define IRQ_DMA0 16
#define IRQ_PWRFAIL 17
#define IRQ_UART1 18
#define IRQ_FIRDA 19
#define IRQ_MSP0 20
#define IRQ_I2C0 21
#define IRQ_I2C1 22
#define IRQ_SDMMC 23
#define IRQ_USBOTG 24
#define IRQ_SVA_IT0 25
#define IRQ_SVA_IT1 26
#define IRQ_SAA_IT0 27
#define IRQ_SAA_IT1 28
#define IRQ_UART2 29
#define IRQ_MSP2 30
#define IRQ_L2CC 49
#define IRQ_HPI 50
#define IRQ_SKE 51
#define IRQ_KP 52
#define IRQ_MEMST 55
#define IRQ_SGA_IT 59
#define IRQ_USBM 61
#define IRQ_MSP1 63
#define IRQ_WATCHDOG (IRQ_VIC_START+0)
#define IRQ_SOFTINT (IRQ_VIC_START+1)
#define IRQ_CRYPTO (IRQ_VIC_START+2)
#define IRQ_OWM (IRQ_VIC_START+3)
#define IRQ_MTU0 (IRQ_VIC_START+4)
#define IRQ_MTU1 (IRQ_VIC_START+5)
#define IRQ_GPIO0 (IRQ_VIC_START+6)
#define IRQ_GPIO1 (IRQ_VIC_START+7)
#define IRQ_GPIO2 (IRQ_VIC_START+8)
#define IRQ_GPIO3 (IRQ_VIC_START+9)
#define IRQ_RTC_RTT (IRQ_VIC_START+10)
#define IRQ_SSP (IRQ_VIC_START+11)
#define IRQ_UART0 (IRQ_VIC_START+12)
#define IRQ_DMA1 (IRQ_VIC_START+13)
#define IRQ_CLCD_MDIF (IRQ_VIC_START+14)
#define IRQ_DMA0 (IRQ_VIC_START+15)
#define IRQ_PWRFAIL (IRQ_VIC_START+16)
#define IRQ_UART1 (IRQ_VIC_START+17)
#define IRQ_FIRDA (IRQ_VIC_START+18)
#define IRQ_MSP0 (IRQ_VIC_START+19)
#define IRQ_I2C0 (IRQ_VIC_START+20)
#define IRQ_I2C1 (IRQ_VIC_START+21)
#define IRQ_SDMMC (IRQ_VIC_START+22)
#define IRQ_USBOTG (IRQ_VIC_START+23)
#define IRQ_SVA_IT0 (IRQ_VIC_START+24)
#define IRQ_SVA_IT1 (IRQ_VIC_START+25)
#define IRQ_SAA_IT0 (IRQ_VIC_START+26)
#define IRQ_SAA_IT1 (IRQ_VIC_START+27)
#define IRQ_UART2 (IRQ_VIC_START+28)
#define IRQ_MSP2 (IRQ_VIC_START+29)
#define IRQ_L2CC (IRQ_VIC_START+30)
#define IRQ_HPI (IRQ_VIC_START+31)
#define IRQ_SKE (IRQ_VIC_START+32)
#define IRQ_KP (IRQ_VIC_START+33)
#define IRQ_MEMST (IRQ_VIC_START+34)
#define IRQ_SGA_IT (IRQ_VIC_START+35)
#define IRQ_USBM (IRQ_VIC_START+36)
#define IRQ_MSP1 (IRQ_VIC_START+37)
#define NOMADIK_GPIO_OFFSET (IRQ_VIC_START+64)

View File

@ -160,7 +160,7 @@ static struct omap_lcd_config ams_delta_lcd_config __initdata = {
.ctrl_name = "internal",
};
static struct omap_usb_config ams_delta_usb_config = {
static struct omap_usb_config ams_delta_usb_config __initdata = {
.register_host = 1,
.hmc_mode = 16,
.pins[0] = 2,

View File

@ -142,7 +142,7 @@ static struct omap_mbox mbox_dsp_info = {
static struct omap_mbox *omap1_mboxes[] = { &mbox_dsp_info, NULL };
static int __devinit omap1_mbox_probe(struct platform_device *pdev)
static int omap1_mbox_probe(struct platform_device *pdev)
{
struct resource *mem;
int ret;
@ -165,7 +165,7 @@ static int __devinit omap1_mbox_probe(struct platform_device *pdev)
return 0;
}
static int __devexit omap1_mbox_remove(struct platform_device *pdev)
static int omap1_mbox_remove(struct platform_device *pdev)
{
omap_mbox_unregister();
iounmap(mbox_base);
@ -174,7 +174,7 @@ static int __devexit omap1_mbox_remove(struct platform_device *pdev)
static struct platform_driver omap1_mbox_driver = {
.probe = omap1_mbox_probe,
.remove = __devexit_p(omap1_mbox_remove),
.remove = omap1_mbox_remove,
.driver = {
.name = "omap-mailbox",
},

View File

@ -629,8 +629,14 @@ static void __init omap_1510_usb_init(struct omap_usb_config *config)
static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
#endif
void __init omap1_usb_init(struct omap_usb_config *pdata)
void __init omap1_usb_init(struct omap_usb_config *_pdata)
{
struct omap_usb_config *pdata;
pdata = kmemdup(_pdata, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return;
pdata->usb0_init = omap1_usb0_init;
pdata->usb1_init = omap1_usb1_init;
pdata->usb2_init = omap1_usb2_init;

View File

@ -1167,6 +1167,8 @@ static const struct clk_ops emu_src_ck_ops = {
.recalc_rate = &omap2_clksel_recalc,
.get_parent = &omap2_clksel_find_parent_index,
.set_parent = &omap2_clksel_set_parent,
.enable = &omap2_clkops_enable_clkdm,
.disable = &omap2_clkops_disable_clkdm,
};
static struct clk emu_src_ck;

View File

@ -744,7 +744,7 @@ static int gpmc_setup_irq(void)
return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL);
}
static __devexit int gpmc_free_irq(void)
static int gpmc_free_irq(void)
{
int i;
@ -762,7 +762,7 @@ static __devexit int gpmc_free_irq(void)
return 0;
}
static void __devexit gpmc_mem_exit(void)
static void gpmc_mem_exit(void)
{
int cs;
@ -774,7 +774,7 @@ static void __devexit gpmc_mem_exit(void)
}
static int __devinit gpmc_mem_init(void)
static int gpmc_mem_init(void)
{
int cs, rc;
unsigned long boot_rom_space = 0;
@ -1121,7 +1121,7 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
return 0;
}
static __devinit int gpmc_probe(struct platform_device *pdev)
static int gpmc_probe(struct platform_device *pdev)
{
int rc;
u32 l;
@ -1177,7 +1177,7 @@ static __devinit int gpmc_probe(struct platform_device *pdev)
return 0;
}
static __devexit int gpmc_remove(struct platform_device *pdev)
static int gpmc_remove(struct platform_device *pdev)
{
gpmc_free_irq();
gpmc_mem_exit();
@ -1187,7 +1187,7 @@ static __devexit int gpmc_remove(struct platform_device *pdev)
static struct platform_driver gpmc_driver = {
.probe = gpmc_probe,
.remove = __devexit_p(gpmc_remove),
.remove = gpmc_remove,
.driver = {
.name = DEVICE_NAME,
.owner = THIS_MODULE,

View File

@ -342,7 +342,7 @@ struct omap_mbox mbox_2_info = {
struct omap_mbox *omap4_mboxes[] = { &mbox_1_info, &mbox_2_info, NULL };
#endif
static int __devinit omap2_mbox_probe(struct platform_device *pdev)
static int omap2_mbox_probe(struct platform_device *pdev)
{
struct resource *mem;
int ret;
@ -395,7 +395,7 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
return 0;
}
static int __devexit omap2_mbox_remove(struct platform_device *pdev)
static int omap2_mbox_remove(struct platform_device *pdev)
{
omap_mbox_unregister();
iounmap(mbox_base);
@ -404,7 +404,7 @@ static int __devexit omap2_mbox_remove(struct platform_device *pdev)
static struct platform_driver omap2_mbox_driver = {
.probe = omap2_mbox_probe,
.remove = __devexit_p(omap2_mbox_remove),
.remove = omap2_mbox_remove,
.driver = {
.name = "omap-mailbox",
},

View File

@ -2070,7 +2070,7 @@ static struct omap_hwmod_irq_info am33xx_usbss_mpu_irqs[] = {
{ .name = "usbss-irq", .irq = 17 + OMAP_INTC_START, },
{ .name = "musb0-irq", .irq = 18 + OMAP_INTC_START, },
{ .name = "musb1-irq", .irq = 19 + OMAP_INTC_START, },
{ .irq = -1 + OMAP_INTC_START, },
{ .irq = -1, },
};
static struct omap_hwmod am33xx_usbss_hwmod = {
@ -2515,7 +2515,7 @@ static struct omap_hwmod_ocp_if am33xx_l4_hs__cpgmac0 = {
.user = OCP_USER_MPU,
};
struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
static struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
{
.pa_start = 0x4A101000,
.pa_end = 0x4A101000 + SZ_256 - 1,
@ -2523,7 +2523,7 @@ struct omap_hwmod_addr_space am33xx_mdio_addr_space[] = {
{ }
};
struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
static struct omap_hwmod_ocp_if am33xx_cpgmac0__mdio = {
.master = &am33xx_cpgmac0_hwmod,
.slave = &am33xx_mdio_hwmod,
.addr = am33xx_mdio_addr_space,

View File

@ -27,6 +27,14 @@
#include "cm2xxx_3xxx.h"
#include "prm-regbits-24xx.h"
/*
* OMAP24xx PM_PWSTCTRL_*.POWERSTATE and PM_PWSTST_*.LASTSTATEENTERED bits -
* these are reversed from the bits used on OMAP3+
*/
#define OMAP24XX_PWRDM_POWER_ON 0x0
#define OMAP24XX_PWRDM_POWER_RET 0x1
#define OMAP24XX_PWRDM_POWER_OFF 0x3
/*
* omap2xxx_prm_reset_src_map - map from bits in the PRM_RSTST_WKUP
* hardware register (which are specific to the OMAP2xxx SoCs) to
@ -67,6 +75,34 @@ static u32 omap2xxx_prm_read_reset_sources(void)
return r;
}
/**
* omap2xxx_pwrst_to_common_pwrst - convert OMAP2xxx pwrst to common pwrst
* @omap2xxx_pwrst: OMAP2xxx hardware power state to convert
*
* Return the common power state bits corresponding to the OMAP2xxx
* hardware power state bits @omap2xxx_pwrst, or -EINVAL upon error.
*/
static int omap2xxx_pwrst_to_common_pwrst(u8 omap2xxx_pwrst)
{
u8 pwrst;
switch (omap2xxx_pwrst) {
case OMAP24XX_PWRDM_POWER_OFF:
pwrst = PWRDM_POWER_OFF;
break;
case OMAP24XX_PWRDM_POWER_RET:
pwrst = PWRDM_POWER_RET;
break;
case OMAP24XX_PWRDM_POWER_ON:
pwrst = PWRDM_POWER_ON;
break;
default:
return -EINVAL;
}
return pwrst;
}
/**
* omap2xxx_prm_dpll_reset - use DPLL reset to reboot the OMAP SoC
*
@ -97,10 +133,56 @@ int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm)
return 0;
}
static int omap2xxx_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
{
u8 omap24xx_pwrst;
switch (pwrst) {
case PWRDM_POWER_OFF:
omap24xx_pwrst = OMAP24XX_PWRDM_POWER_OFF;
break;
case PWRDM_POWER_RET:
omap24xx_pwrst = OMAP24XX_PWRDM_POWER_RET;
break;
case PWRDM_POWER_ON:
omap24xx_pwrst = OMAP24XX_PWRDM_POWER_ON;
break;
default:
return -EINVAL;
}
omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
(omap24xx_pwrst << OMAP_POWERSTATE_SHIFT),
pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
return 0;
}
static int omap2xxx_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
{
u8 omap2xxx_pwrst;
omap2xxx_pwrst = omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP2_PM_PWSTCTRL,
OMAP_POWERSTATE_MASK);
return omap2xxx_pwrst_to_common_pwrst(omap2xxx_pwrst);
}
static int omap2xxx_pwrdm_read_pwrst(struct powerdomain *pwrdm)
{
u8 omap2xxx_pwrst;
omap2xxx_pwrst = omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP2_PM_PWSTST,
OMAP_POWERSTATEST_MASK);
return omap2xxx_pwrst_to_common_pwrst(omap2xxx_pwrst);
}
struct pwrdm_ops omap2_pwrdm_operations = {
.pwrdm_set_next_pwrst = omap2_pwrdm_set_next_pwrst,
.pwrdm_read_next_pwrst = omap2_pwrdm_read_next_pwrst,
.pwrdm_read_pwrst = omap2_pwrdm_read_pwrst,
.pwrdm_set_next_pwrst = omap2xxx_pwrdm_set_next_pwrst,
.pwrdm_read_next_pwrst = omap2xxx_pwrdm_read_next_pwrst,
.pwrdm_read_pwrst = omap2xxx_pwrdm_read_pwrst,
.pwrdm_set_logic_retst = omap2_pwrdm_set_logic_retst,
.pwrdm_set_mem_onst = omap2_pwrdm_set_mem_onst,
.pwrdm_set_mem_retst = omap2_pwrdm_set_mem_retst,

View File

@ -103,28 +103,6 @@ int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift)
/* Powerdomain low-level functions */
/* Common functions across OMAP2 and OMAP3 */
int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
{
omap2_prm_rmw_mod_reg_bits(OMAP_POWERSTATE_MASK,
(pwrst << OMAP_POWERSTATE_SHIFT),
pwrdm->prcm_offs, OMAP2_PM_PWSTCTRL);
return 0;
}
int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP2_PM_PWSTCTRL,
OMAP_POWERSTATE_MASK);
}
int omap2_pwrdm_read_pwrst(struct powerdomain *pwrdm)
{
return omap2_prm_read_mod_bits_shift(pwrdm->prcm_offs,
OMAP2_PM_PWSTST,
OMAP_POWERSTATEST_MASK);
}
int omap2_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
u8 pwrst)
{

Some files were not shown because too many files have changed in this diff Show More