hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Phonet: improve documentation 

Fix grammar errors spotted by Randy Dunlap,
and adds some more details.

Signed-off-by: Remi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Rémi Denis-Courmont 2008-09-30 02:52:01 -07:00 committed by David S. Miller
parent 8980713b97
commit ac2dc8ca14
1 changed files with 20 additions and 10 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

30
Documentation/networking/phonet.txt
View File

@ -21,7 +21,7 @@ depending on the device, such as:
Packets format
--------------
Phonet packet have a common header as follow:
Phonet packets have a common header as follows:
struct phonethdr {
uint8_t pn_media; /* Media type (link-layer identifier) */
@ -33,14 +33,17 @@ Phonet packet have a common header as follow:
uint8_t pn_sobj; /* Sender object ID */
};
The device ID is split: the 6 higher order bits consitutes the device
address, while the 2 lower order bits are used for multiplexing, as are
the 8-bits object identifiers. As such, Phonet can be considered as a
On Linux, the link-layer header includes the pn_media byte (see below).
The next 7 bytes are part of the network-layer header.
The device ID is split: the 6 higher-order bits consitute the device
address, while the 2 lower-order bits are used for multiplexing, as are
the 8-bit object identifiers. As such, Phonet can be considered as a
network layer with 6 bits of address space and 10 bits for transport
protocol (much like port numbers in IP world).
The modem always has address number zero. Each other device has a its
own 6-bits address.
The modem always has address number zero. All other device have a their
own 6-bit address.
Link layer
@ -49,11 +52,18 @@ Link layer
Phonet links are always point-to-point links. The link layer header
consists of a single Phonet media type byte. It uniquely identifies the
link through which the packet is transmitted, from the modem's
perspective.
perspective. Each Phonet network device shall prepend and set the media
type byte as appropriate. For convenience, a common phonet_header_ops
link-layer header operations structure is provided. It sets the
media type according to the network device hardware address.
Linux Phonet network interfaces use a dedicated link layer type
(ETH_P_PHONET) which is out of the Ethernet type range. They can only
send and receive Phonet packets.
Linux Phonet network interfaces support a dedicated link layer packets
type (ETH_P_PHONET) which is out of the Ethernet type range. They can
only send and receive Phonet packets.
The virtual TUN tunnel device driver can also be used for Phonet. This
requires IFF_TUN mode, _without_ the IFF_NO_PI flag. In this case,
there is no link-layer header, so there is no Phonet media type byte.
Note that Phonet interfaces are not allowed to re-order packets, so
only the (default) Linux FIFO qdisc should be used with them.