V4L/DVB (3432): Hauppauge HVR 900 Composite support

- Hauppauge HVR 900 Composite support

Signed-off-by: Markus Rechberger <mrechberger@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
This commit is contained in:
Markus Rechberger 2006-01-23 17:11:10 -02:00 committed by Mauro Carvalho Chehab
parent cbcf749382
commit a94e95b443
3 changed files with 56 additions and 14 deletions

View File

@ -136,6 +136,28 @@ struct em28xx_board em28xx_boards[] = {
.amux = 1,
}},
},
[EM2880_BOARD_WINTV_HVR_900] = {
.name = "WinTV HVR 900",
.vchannels = 3,
.norm = VIDEO_MODE_PAL,
.has_tuner = 0,
.tda9887_conf = TDA9887_PRESENT,
.has_tuner = 1,
.decoder = EM28XX_TVP5150,
.input = {{
.type = EM28XX_VMUX_COMPOSITE1,
.vmux = 2,
.amux = 0,
},{
.type = EM28XX_VMUX_TELEVISION,
.vmux = 0,
.amux = 1,
},{
.type = EM28XX_VMUX_SVIDEO,
.vmux = 9,
.amux = 1,
}},
},
[EM2820_BOARD_MSI_VOX_USB_2] = {
.name = "MSI VOX USB 2.0",
.vchannels = 3,
@ -254,30 +276,47 @@ struct usb_device_id em28xx_id_table [] = {
{ USB_DEVICE(0x2304, 0x0208), .driver_info = EM2820_BOARD_PINNACLE_USB_2 },
{ USB_DEVICE(0x2040, 0x4200), .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 },
{ USB_DEVICE(0x2304, 0x0207), .driver_info = EM2820_BOARD_PINNACLE_DVC_90 },
{ USB_DEVICE(0x2040, 0x6500), .driver_info = EM2880_BOARD_WINTV_HVR_900 },
{ },
};
void em28xx_pre_card_setup(struct em28xx *dev)
{
/* request some modules */
switch(dev->model){
case EM2880_BOARD_WINTV_HVR_900:
{
em28xx_write_regs_req(dev, 0x00, 0x08, "\x7d", 1); // reset through GPIO?
break;
}
}
}
void em28xx_card_setup(struct em28xx *dev)
{
/* request some modules */
if (dev->model == EM2820_BOARD_HAUPPAUGE_WINTV_USB_2) {
struct tveeprom tv;
switch(dev->model){
case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2:
{
struct tveeprom tv;
#ifdef CONFIG_MODULES
request_module("tveeprom");
request_module("ir-kbd-i2c");
request_module("msp3400");
request_module("tveeprom");
request_module("ir-kbd-i2c");
request_module("msp3400");
#endif
/* Call first TVeeprom */
/* Call first TVeeprom */
dev->i2c_client.addr = 0xa0 >> 1;
tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
dev->i2c_client.addr = 0xa0 >> 1;
tveeprom_hauppauge_analog(&dev->i2c_client, &tv, dev->eedata);
dev->tuner_type= tv.tuner_type;
if (tv.audio_processor == AUDIO_CHIP_MSP34XX) {
dev->i2s_speed=2048000;
dev->has_msp34xx=1;
} else
dev->has_msp34xx=0;
dev->tuner_type= tv.tuner_type;
if (tv.audio_processor == AUDIO_CHIP_MSP34XX) {
dev->i2s_speed=2048000;
dev->has_msp34xx=1;
} else
dev->has_msp34xx=0;
break;
}
}
}

View File

@ -1766,6 +1766,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
dev->vpic.depth = 16;
dev->vpic.palette = VIDEO_PALETTE_YUV422;
em28xx_pre_card_setup(dev);
#ifdef CONFIG_MODULES
/* request some modules */
if (dev->decoder == EM28XX_SAA7113 || dev->decoder == EM28XX_SAA7114)

View File

@ -41,6 +41,7 @@
#define EM2800_BOARD_LEADTEK_WINFAST_USBII 7
#define EM2800_BOARD_KWORLD_USB2800 8
#define EM2820_BOARD_PINNACLE_DVC_90 9
#define EM2880_BOARD_WINTV_HVR_900 10
#define UNSET -1
@ -327,6 +328,7 @@ int em28xx_set_alternate(struct em28xx *dev);
/* Provided by em28xx-cards.c */
extern int em2800_variant_detect(struct usb_device* udev,int model);
extern void em28xx_pre_card_setup(struct em28xx *dev);
extern void em28xx_card_setup(struct em28xx *dev);
extern struct em28xx_board em28xx_boards[];
extern struct usb_device_id em28xx_id_table[];