diff --git a/Documentation/devicetree/bindings/arm/arm,scpi.txt b/Documentation/devicetree/bindings/arm/arm,scpi.txt
index faa4b44572e3..d1882c4540d0 100644
--- a/Documentation/devicetree/bindings/arm/arm,scpi.txt
+++ b/Documentation/devicetree/bindings/arm/arm,scpi.txt
@@ -59,18 +59,14 @@ SRAM and Shared Memory for SCPI
 A small area of SRAM is reserved for SCPI communication between application
 processors and SCP.
 
-Required properties:
-- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM on Juno
-
-The rest of the properties should follow the generic mmio-sram description
-found in ../../sram/sram.txt
+The properties should follow the generic mmio-sram description found in [3]
 
 Each sub-node represents the reserved area for SCPI.
 
 Required sub-node properties:
 - reg : The base offset and size of the reserved area with the SRAM
-- compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based
-	       shared memory on Juno platforms
+- compatible : should be "arm,scp-shmem" for Non-secure SRAM based
+	       shared memory
 
 Sensor bindings for the sensors based on SCPI Message Protocol
 --------------------------------------------------------------
@@ -81,11 +77,9 @@ Required properties:
 - #thermal-sensor-cells: should be set to 1. This property follows the
 			 thermal device tree bindings[2].
 
-			 Valid cell values are raw identifiers (Sensor
-			 ID) as used by the firmware. Refer to
-			 platform documentation for your
-			 implementation for the IDs to use. For Juno
-			 R0 and Juno R1 refer to [3].
+			 Valid cell values are raw identifiers (Sensor ID)
+			 as used by the firmware. Refer to  platform details
+			 for your implementation for the IDs to use.
 
 Power domain bindings for the power domains based on SCPI Message Protocol
 ------------------------------------------------------------
@@ -112,7 +106,7 @@ Required properties:
 [0] http://infocenter.arm.com/help/topic/com.arm.doc.dui0922b/index.html
 [1] Documentation/devicetree/bindings/clock/clock-bindings.txt
 [2] Documentation/devicetree/bindings/thermal/thermal.txt
-[3] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html
+[3] Documentation/devicetree/bindings/sram/sram.txt
 [4] Documentation/devicetree/bindings/power/power_domain.txt
 
 Example:
diff --git a/Documentation/devicetree/bindings/arm/juno,scpi.txt b/Documentation/devicetree/bindings/arm/juno,scpi.txt
new file mode 100644
index 000000000000..2ace8696bbee
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/juno,scpi.txt
@@ -0,0 +1,26 @@
+System Control and Power Interface (SCPI) Message Protocol
+(in addition to the standard binding in [0])
+
+Juno SRAM and Shared Memory for SCPI
+------------------------------------
+
+Required properties:
+- compatible : should be "arm,juno-sram-ns" for Non-secure SRAM
+
+Each sub-node represents the reserved area for SCPI.
+
+Required sub-node properties:
+- reg : The base offset and size of the reserved area with the SRAM
+- compatible : should be "arm,juno-scp-shmem" for Non-secure SRAM based
+	       shared memory on Juno platforms
+
+Sensor bindings for the sensors based on SCPI Message Protocol
+--------------------------------------------------------------
+Required properties:
+- compatible : should be "arm,scpi-sensors".
+- #thermal-sensor-cells: should be set to 1.
+			 For Juno R0 and Juno R1 refer to [1] for the
+			 sensor identifiers
+
+[0] Documentation/devicetree/bindings/arm/arm,scpi.txt
+[1] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0922b/apas03s22.html