hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

phy: rockchip-emmc: output tap delay dt property 

Update the rockchip-emmc phy to set the otapdlysec register with
a dt property. This was mentioned from Brian Norris when he sent
the path to set the default value in the driver.
This patch add a dt property 'output-tapdelay-select' u32 and allow
to set the 0x0-0xf. If not set in dts, the old default 0x4 applies.

Tested with our customized rk3399 to tune the eMMC.

Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
Link: https://lore.kernel.org/r/20201202082507.3536-2-chris.ruehl@gtsys.com.hk
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This commit is contained in:
Chris Ruehl 2020-12-02 16:25:06 +08:00 committed by Vinod Koul
parent 31de313dfd
commit a8cef92827
1 changed files with 12 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

13
drivers/phy/rockchip/phy-rockchip-emmc.c
View File

@ -65,6 +65,8 @@
#define PHYCTRL_OTAPDLYENA 0x1
#define PHYCTRL_OTAPDLYENA_MASK 0x1
#define PHYCTRL_OTAPDLYENA_SHIFT 0xb
#define PHYCTRL_OTAPDLYSEL_DEFAULT 0x4
#define PHYCTRL_OTAPDLYSEL_MAXVALUE 0xf
#define PHYCTRL_OTAPDLYSEL_MASK 0xf
#define PHYCTRL_OTAPDLYSEL_SHIFT 0x7
#define PHYCTRL_REN_STRB_DISABLE 0x0
@ -85,6 +87,7 @@ struct rockchip_emmc_phy {
struct clk *emmcclk;
unsigned int drive_impedance;
unsigned int enable_strobe_pulldown;
unsigned int output_tapdelay_select;
};
static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
@ -296,7 +299,7 @@ static int rockchip_emmc_phy_power_on(struct phy *phy)
/* Output tap delay */
regmap_write(rk_phy->reg_base,
rk_phy->reg_offset + GRF_EMMCPHY_CON0,
HIWORD_UPDATE(4,
HIWORD_UPDATE(rk_phy->output_tapdelay_select,
PHYCTRL_OTAPDLYSEL_MASK,
PHYCTRL_OTAPDLYSEL_SHIFT));
@ -372,6 +375,7 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev)
rk_phy->reg_base = grf;
rk_phy->drive_impedance = PHYCTRL_DR_50OHM;
rk_phy->enable_strobe_pulldown = PHYCTRL_REN_STRB_DISABLE;
rk_phy->output_tapdelay_select = PHYCTRL_OTAPDLYSEL_DEFAULT;
if (!of_property_read_u32(dev->of_node, "drive-impedance-ohm", &val))
rk_phy->drive_impedance = convert_drive_impedance_ohm(pdev, val);
@ -379,6 +383,13 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev)
if (of_property_read_bool(dev->of_node, "enable-strobe-pulldown"))
rk_phy->enable_strobe_pulldown = PHYCTRL_REN_STRB_ENABLE;
if (!of_property_read_u32(dev->of_node, "output-tapdelay-select", &val)) {
if (val <= PHYCTRL_OTAPDLYSEL_MAXVALUE)
rk_phy->output_tapdelay_select = val;
else
dev_err(dev, "output-tapdelay-select exceeds limit, apply default\n");
}
generic_phy = devm_phy_create(dev, dev->of_node, &ops);
if (IS_ERR(generic_phy)) {
dev_err(dev, "failed to create PHY\n");