V4L/DVB (9162): ivtv: fix raw/sliced VBI mixup

The service_set field was used in saa7115 and cx25840 to determine
whether raw or sliced VBI was desired. This is incorrect since it is
perfectly valid to select sliced VBI with a service_set of 0.

Instead these drivers should checked on VIDIOC_S_FMT whether the type
field matches the raw or sliced VBI type.

Updated ivtv accordingly.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
This commit is contained in:
Hans Verkuil 2008-10-04 08:05:30 -03:00 committed by Mauro Carvalho Chehab
parent 3c7b933bea
commit a8b864354e
8 changed files with 27 additions and 12 deletions

View File

@ -141,10 +141,11 @@ int cx25840_vbi(struct i2c_client *client, unsigned int cmd, void *arg)
u8 lcr[24];
fmt = arg;
if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE)
if (fmt->type != V4L2_BUF_TYPE_SLICED_VBI_CAPTURE &&
fmt->type != V4L2_BUF_TYPE_VBI_CAPTURE)
return -EINVAL;
svbi = &fmt->fmt.sliced;
if (svbi->service_set == 0) {
if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
/* raw VBI */
memset(svbi, 0, sizeof(*svbi));

View File

@ -720,7 +720,7 @@ static int __devinit ivtv_init_struct1(struct ivtv *itv)
itv->speed = 1000;
/* VBI */
itv->vbi.in.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
itv->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE;
itv->vbi.sliced_in = &itv->vbi.in.fmt.sliced;
/* Init the sg table for osd/yuv output */

View File

@ -750,6 +750,12 @@ void ivtv_read_eeprom(struct ivtv *itv, struct tveeprom *tv);
/* First-open initialization: load firmware, init cx25840, etc. */
int ivtv_init_on_first_open(struct ivtv *itv);
/* Test if the current VBI mode is raw (1) or sliced (0) */
static inline int ivtv_raw_vbi(const struct ivtv *itv)
{
return itv->vbi.in.type == V4L2_BUF_TYPE_VBI_CAPTURE;
}
/* This is a PCI post thing, where if the pci register is not read, then
the write doesn't always take effect right away. By reading back the
register any pending PCI writes will be performed (in order), and so

View File

@ -78,7 +78,7 @@ static int ivtv_claim_stream(struct ivtv_open_id *id, int type)
if (type == IVTV_DEC_STREAM_TYPE_MPG) {
vbi_type = IVTV_DEC_STREAM_TYPE_VBI;
} else if (type == IVTV_ENC_STREAM_TYPE_MPG &&
itv->vbi.insert_mpeg && itv->vbi.sliced_in->service_set) {
itv->vbi.insert_mpeg && !ivtv_raw_vbi(itv)) {
vbi_type = IVTV_ENC_STREAM_TYPE_VBI;
} else {
return 0;
@ -305,7 +305,7 @@ static size_t ivtv_copy_buf_to_user(struct ivtv_stream *s, struct ivtv_buffer *b
if (len > ucount) len = ucount;
if (itv->vbi.insert_mpeg && s->type == IVTV_ENC_STREAM_TYPE_MPG &&
itv->vbi.sliced_in->service_set && buf != &itv->vbi.sliced_mpeg_buf) {
!ivtv_raw_vbi(itv) && buf != &itv->vbi.sliced_mpeg_buf) {
const char *start = buf->buf + buf->readpos;
const char *p = start + 1;
const u8 *q;
@ -372,7 +372,7 @@ static ssize_t ivtv_read(struct ivtv_stream *s, char __user *ubuf, size_t tot_co
/* Each VBI buffer is one frame, the v4l2 API says that for VBI the frames should
arrive one-by-one, so make sure we never output more than one VBI frame at a time */
if (s->type == IVTV_DEC_STREAM_TYPE_VBI ||
(s->type == IVTV_ENC_STREAM_TYPE_VBI && itv->vbi.sliced_in->service_set))
(s->type == IVTV_ENC_STREAM_TYPE_VBI && !ivtv_raw_vbi(itv)))
single_frame = 1;
for (;;) {

View File

@ -575,8 +575,11 @@ static int ivtv_s_fmt_vbi_cap(struct file *file, void *fh, struct v4l2_format *f
{
struct ivtv *itv = ((struct ivtv_open_id *)fh)->itv;
if (!ivtv_raw_vbi(itv) && atomic_read(&itv->capturing) > 0)
return -EBUSY;
itv->vbi.sliced_in->service_set = 0;
itv->video_dec_func(itv, VIDIOC_S_FMT, &itv->vbi.in);
itv->vbi.in.type = V4L2_BUF_TYPE_VBI_CAPTURE;
itv->video_dec_func(itv, VIDIOC_S_FMT, fmt);
return ivtv_g_fmt_vbi_cap(file, fh, fmt);
}
@ -591,8 +594,9 @@ static int ivtv_s_fmt_sliced_vbi_cap(struct file *file, void *fh, struct v4l2_fo
return ret;
check_service_set(vbifmt, itv->is_50hz);
if (atomic_read(&itv->capturing) > 0)
if (ivtv_raw_vbi(itv) && atomic_read(&itv->capturing) > 0)
return -EBUSY;
itv->vbi.in.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
itv->video_dec_func(itv, VIDIOC_S_FMT, fmt);
memcpy(itv->vbi.sliced_in, vbifmt, sizeof(*itv->vbi.sliced_in));
return 0;

View File

@ -334,7 +334,7 @@ void ivtv_streams_cleanup(struct ivtv *itv, int unregister)
static void ivtv_vbi_setup(struct ivtv *itv)
{
int raw = itv->vbi.sliced_in->service_set == 0;
int raw = ivtv_raw_vbi(itv);
u32 data[CX2341X_MBOX_MAX_DATA];
int lines;
int i;

View File

@ -334,7 +334,7 @@ void ivtv_process_vbi_data(struct ivtv *itv, struct ivtv_buffer *buf,
int y;
/* Raw VBI data */
if (streamtype == IVTV_ENC_STREAM_TYPE_VBI && itv->vbi.sliced_in->service_set == 0) {
if (streamtype == IVTV_ENC_STREAM_TYPE_VBI && ivtv_raw_vbi(itv)) {
u8 type;
ivtv_buf_swap(buf);

View File

@ -1057,7 +1057,7 @@ static void saa711x_set_lcr(struct i2c_client *client, struct v4l2_sliced_vbi_fo
for (i = 0; i <= 23; i++)
lcr[i] = 0xff;
if (fmt->service_set == 0) {
if (fmt == NULL) {
/* raw VBI */
if (is_50hz)
for (i = 6; i <= 23; i++)
@ -1113,7 +1113,7 @@ static void saa711x_set_lcr(struct i2c_client *client, struct v4l2_sliced_vbi_fo
}
/* enable/disable raw VBI capturing */
saa711x_writeregs(client, fmt->service_set == 0 ?
saa711x_writeregs(client, fmt == NULL ?
saa7115_cfg_vbi_on :
saa7115_cfg_vbi_off);
}
@ -1153,6 +1153,10 @@ static int saa711x_set_v4lfmt(struct i2c_client *client, struct v4l2_format *fmt
saa711x_set_lcr(client, &fmt->fmt.sliced);
return 0;
}
if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) {
saa711x_set_lcr(client, NULL);
return 0;
}
if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE)
return -EINVAL;