ARM: at91: add ram controller DT support

We can now drop the call to ioremap_registers() as we have the binding for the
SDRAM/DDR Controller.

Drop ioremap_registers() for sam9x5 too.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Documentation/devicetree/bindings/arm/atmel-at91.txt

@@ -42,3 +42,22 @@ Example:
 		compatible = "atmel,at91sam9260-rstc";
 		reg = <0xfffffd00 0x10>;
 	};
+
+RAMC SDRAM/DDR Controller required properties:
+- compatible: Should be "atmel,at91sam9260-sdramc",
+			"atmel,at91sam9g45-ddramc",
+- reg: Should contain registers location and length
+  For at91sam9263 and at91sam9g45 you must specify 2 entries.
+
+Examples:
+
+	ramc0: ramc@ffffe800 {
+		compatible = "atmel,at91sam9g45-ddramc";
+		reg = <0xffffe800 0x200>;
+	};
+
+	ramc0: ramc@ffffe400 {
+		compatible = "atmel,at91sam9g45-ddramc";
+		reg = <0xffffe400 0x200
+		       0xffffe600 0x200>;
+	};

arch/arm/boot/dts/at91sam9g20.dtsi

@@ -59,6 +59,11 @@
 				reg = <0xfffff000 0x200>;
 			};
 
+			ramc0: ramc@ffffea00 {
+				compatible = "atmel,at91sam9260-sdramc";
+				reg = <0xffffea00 0x200>;
+			};
+
 			pmc: pmc@fffffc00 {
 				compatible = "atmel,at91rm9200-pmc";
 				reg = <0xfffffc00 0x100>;

arch/arm/boot/dts/at91sam9g45.dtsi

@@ -60,6 +60,12 @@
 				reg = <0xfffff000 0x200>;
 			};
 
+			ramc0: ramc@ffffe400 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe400 0x200
+				       0xffffe600 0x200>;
+			};
+
 			pmc: pmc@fffffc00 {
 				compatible = "atmel,at91rm9200-pmc";
 				reg = <0xfffffc00 0x100>;

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -58,6 +58,11 @@
 				reg = <0xfffff000 0x200>;
 			};
 
+			ramc0: ramc@ffffe800 {
+				compatible = "atmel,at91sam9g45-ddramc";
+				reg = <0xffffe800 0x200>;
+			};
+
 			pmc: pmc@fffffc00 {
 				compatible = "atmel,at91rm9200-pmc";
 				reg = <0xfffffc00 0x100>;

arch/arm/mach-at91/at91sam9x5.c

@@ -299,11 +299,6 @@ static void __init at91sam9x5_map_io(void)
 	at91_init_sram(0, AT91SAM9X5_SRAM_BASE, AT91SAM9X5_SRAM_SIZE);
 }
 
-static void __init at91sam9x5_ioremap_registers(void)
-{
-	at91_ioremap_ramc(0, AT91SAM9X5_BASE_DDRSDRC0, 512);
-}
-
 void __init at91sam9x5_initialize(void)
 {
 	at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0);
@@ -356,7 +351,6 @@ static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = {
 struct at91_init_soc __initdata at91sam9x5_soc = {
 	.map_io = at91sam9x5_map_io,
 	.default_irq_priority = at91sam9x5_default_irq_priority,
-	.ioremap_registers = at91sam9x5_ioremap_registers,
 	.register_clocks = at91sam9x5_register_clocks,
 	.init = at91sam9x5_initialize,
 };

arch/arm/mach-at91/include/mach/at91sam9x5.h

@@ -54,11 +54,6 @@
 #define AT91SAM9X5_BASE_USART1	0xf8020000
 #define AT91SAM9X5_BASE_USART2	0xf8024000
 
-/*
- * System Peripherals
- */
-#define AT91SAM9X5_BASE_DDRSDRC0	0xffffe800
-
 /*
  * Base addresses for early serial code (uncompress.h)
  */

arch/arm/mach-at91/pm.c

@@ -197,19 +197,6 @@ extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0,
 extern u32 at91_slow_clock_sz;
 #endif
 
-void __iomem *at91_ramc_base[2];
-
-void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
-{
-	if (id < 0 || id > 1) {
-		pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id);
-		BUG();
-	}
-	at91_ramc_base[id] = ioremap(addr, size);
-	if (!at91_ramc_base[id])
-		panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
-}
-
 static int at91_pm_enter(suspend_state_t state)
 {
 	at91_gpio_suspend();

arch/arm/mach-at91/setup.c

@@ -52,6 +52,19 @@ void __init at91_init_interrupts(unsigned int *priority)
 	at91_gpio_irq_setup();
 }
 
+void __iomem *at91_ramc_base[2];
+
+void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
+{
+	if (id < 0 || id > 1) {
+		pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id);
+		BUG();
+	}
+	at91_ramc_base[id] = ioremap(addr, size);
+	if (!at91_ramc_base[id])
+		panic("Impossible to ioremap ramc.%d 0x%x\n", id, addr);
+}
+
 static struct map_desc sram_desc[2] __initdata;
 
 void __init at91_init_sram(int bank, unsigned long base, unsigned int length)
@@ -315,12 +328,33 @@ static void at91_dt_rstc(void)
 	of_node_put(np);
 }
 
+static struct of_device_id ramc_ids[] = {
+	{ .compatible = "atmel,at91sam9260-sdramc" },
+	{ .compatible = "atmel,at91sam9g45-ddramc" },
+	{ /*sentinel*/ }
+};
+
+static void at91_dt_ramc(void)
+{
+	struct device_node *np;
+
+	np = of_find_matching_node(NULL, ramc_ids);
+	if (!np)
+		panic("unable to find compatible ram conroller node in dtb\n");
+
+	at91_ramc_base[0] = of_iomap(np, 0);
+	if (!at91_ramc_base[0])
+		panic("unable to map ramc[0] cpu registers\n");
+	/* the controller may have 2 banks */
+	at91_ramc_base[1] = of_iomap(np, 1);
+
+	of_node_put(np);
+}
+
 void __init at91_dt_initialize(void)
 {
 	at91_dt_rstc();
-
+	at91_dt_ramc();
-	/* temporary until have the ramc binding*/
-	at91_boot_soc.ioremap_registers();
 
 	/* Init clock subsystem */
 	at91_dt_clock_init();