MIPS: ath25: add board configuration detection
All boards based on AR5312/AR2315 SoC have a special structure located at the end of flash. This structure contains board-specific data such as Ethernet and Wireless MAC addresses. The flash is mapped to the memmory at predefined location. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Linux MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/8243/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Sergey Ryazanov
Ralf Baechle
parent
1ac91b1f68
commit
a747371748
|
|
@ -160,6 +160,12 @@ void __init ar2315_arch_init_irq(void)
|
|||
ar2315_misc_irq_domain = domain;
|
||||
}
|
||||
|
||||
void __init ar2315_init_devices(void)
|
||||
{
|
||||
/* Find board configuration */
|
||||
ath25_find_config(AR2315_SPI_READ_BASE, AR2315_SPI_READ_SIZE);
|
||||
}
|
||||
|
||||
static void ar2315_restart(char *command)
|
||||
{
|
||||
void (*mips_reset_vec)(void) = (void *)0xbfc00000;
|
||||
|
|
|
|||
|
|
@ -4,6 +4,7 @@
|
|||
#ifdef CONFIG_SOC_AR2315
|
||||
|
||||
void ar2315_arch_init_irq(void);
|
||||
void ar2315_init_devices(void);
|
||||
void ar2315_plat_time_init(void);
|
||||
void ar2315_plat_mem_setup(void);
|
||||
void ar2315_arch_init(void);
|
||||
|
|
@ -11,6 +12,7 @@ void ar2315_arch_init(void);
|
|||
#else
|
||||
|
||||
static inline void ar2315_arch_init_irq(void) {}
|
||||
static inline void ar2315_init_devices(void) {}
|
||||
static inline void ar2315_plat_time_init(void) {}
|
||||
static inline void ar2315_plat_mem_setup(void) {}
|
||||
static inline void ar2315_arch_init(void) {}
|
||||
|
|
|
|||
|
|
@ -158,6 +158,45 @@ void __init ar5312_arch_init_irq(void)
|
|||
ar5312_misc_irq_domain = domain;
|
||||
}
|
||||
|
||||
static void __init ar5312_flash_init(void)
|
||||
{
|
||||
void __iomem *flashctl_base;
|
||||
u32 ctl;
|
||||
|
||||
flashctl_base = ioremap_nocache(AR5312_FLASHCTL_BASE,
|
||||
AR5312_FLASHCTL_SIZE);
|
||||
|
||||
/*
|
||||
* Configure flash bank 0.
|
||||
* Assume 8M window size. Flash will be aliased if it's smaller
|
||||
*/
|
||||
ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL0);
|
||||
ctl &= AR5312_FLASHCTL_MW;
|
||||
ctl |= AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC_8M | AR5312_FLASHCTL_RBLE;
|
||||
ctl |= 0x01 << AR5312_FLASHCTL_IDCY_S;
|
||||
ctl |= 0x07 << AR5312_FLASHCTL_WST1_S;
|
||||
ctl |= 0x07 << AR5312_FLASHCTL_WST2_S;
|
||||
__raw_writel(ctl, flashctl_base + AR5312_FLASHCTL0);
|
||||
|
||||
/* Disable other flash banks */
|
||||
ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL1);
|
||||
ctl &= ~(AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC);
|
||||
__raw_writel(ctl, flashctl_base + AR5312_FLASHCTL1);
|
||||
ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL2);
|
||||
ctl &= ~(AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC);
|
||||
__raw_writel(ctl, flashctl_base + AR5312_FLASHCTL2);
|
||||
|
||||
iounmap(flashctl_base);
|
||||
}
|
||||
|
||||
void __init ar5312_init_devices(void)
|
||||
{
|
||||
ar5312_flash_init();
|
||||
|
||||
/* Locate board/radio config data */
|
||||
ath25_find_config(AR5312_FLASH_BASE, AR5312_FLASH_SIZE);
|
||||
}
|
||||
|
||||
static void ar5312_restart(char *command)
|
||||
{
|
||||
/* reset the system */
|
||||
|
|
|
|||
|
|
@ -4,6 +4,7 @@
|
|||
#ifdef CONFIG_SOC_AR5312
|
||||
|
||||
void ar5312_arch_init_irq(void);
|
||||
void ar5312_init_devices(void);
|
||||
void ar5312_plat_time_init(void);
|
||||
void ar5312_plat_mem_setup(void);
|
||||
void ar5312_arch_init(void);
|
||||
|
|
@ -11,6 +12,7 @@ void ar5312_arch_init(void);
|
|||
#else
|
||||
|
||||
static inline void ar5312_arch_init_irq(void) {}
|
||||
static inline void ar5312_init_devices(void) {}
|
||||
static inline void ar5312_plat_time_init(void) {}
|
||||
static inline void ar5312_plat_mem_setup(void) {}
|
||||
static inline void ar5312_arch_init(void) {}
|
||||
|
|
|
|||
|
|
@ -16,12 +16,173 @@
|
|||
#include <asm/bootinfo.h>
|
||||
#include <asm/time.h>
|
||||
|
||||
#include <ath25_platform.h>
|
||||
#include "devices.h"
|
||||
#include "ar5312.h"
|
||||
#include "ar2315.h"
|
||||
|
||||
void (*ath25_irq_dispatch)(void);
|
||||
|
||||
static inline bool check_radio_magic(const void __iomem *addr)
|
||||
{
|
||||
addr += 0x7a; /* offset for flash magic */
|
||||
return (__raw_readb(addr) == 0x5a) && (__raw_readb(addr + 1) == 0xa5);
|
||||
}
|
||||
|
||||
static inline bool check_notempty(const void __iomem *addr)
|
||||
{
|
||||
return __raw_readl(addr) != 0xffffffff;
|
||||
}
|
||||
|
||||
static inline bool check_board_data(const void __iomem *addr, bool broken)
|
||||
{
|
||||
/* config magic found */
|
||||
if (__raw_readl(addr) == ATH25_BD_MAGIC)
|
||||
return true;
|
||||
|
||||
if (!broken)
|
||||
return false;
|
||||
|
||||
/* broken board data detected, use radio data to find the
|
||||
* offset, user will fix this */
|
||||
|
||||
if (check_radio_magic(addr + 0x1000))
|
||||
return true;
|
||||
if (check_radio_magic(addr + 0xf8))
|
||||
return true;
|
||||
|
||||
return false;
|
||||
}
|
||||
|
||||
static const void __iomem * __init find_board_config(const void __iomem *limit,
|
||||
const bool broken)
|
||||
{
|
||||
const void __iomem *addr;
|
||||
const void __iomem *begin = limit - 0x1000;
|
||||
const void __iomem *end = limit - 0x30000;
|
||||
|
||||
for (addr = begin; addr >= end; addr -= 0x1000)
|
||||
if (check_board_data(addr, broken))
|
||||
return addr;
|
||||
|
||||
return NULL;
|
||||
}
|
||||
|
||||
static const void __iomem * __init find_radio_config(const void __iomem *limit,
|
||||
const void __iomem *bcfg)
|
||||
{
|
||||
const void __iomem *rcfg, *begin, *end;
|
||||
|
||||
/*
|
||||
* Now find the start of Radio Configuration data, using heuristics:
|
||||
* Search forward from Board Configuration data by 0x1000 bytes
|
||||
* at a time until we find non-0xffffffff.
|
||||
*/
|
||||
begin = bcfg + 0x1000;
|
||||
end = limit;
|
||||
for (rcfg = begin; rcfg < end; rcfg += 0x1000)
|
||||
if (check_notempty(rcfg) && check_radio_magic(rcfg))
|
||||
return rcfg;
|
||||
|
||||
/* AR2316 relocates radio config to new location */
|
||||
begin = bcfg + 0xf8;
|
||||
end = limit - 0x1000 + 0xf8;
|
||||
for (rcfg = begin; rcfg < end; rcfg += 0x1000)
|
||||
if (check_notempty(rcfg) && check_radio_magic(rcfg))
|
||||
return rcfg;
|
||||
|
||||
return NULL;
|
||||
}
|
||||
|
||||
/*
|
||||
* NB: Search region size could be larger than the actual flash size,
|
||||
* but this shouldn't be a problem here, because the flash
|
||||
* will simply be mapped multiple times.
|
||||
*/
|
||||
int __init ath25_find_config(phys_addr_t base, unsigned long size)
|
||||
{
|
||||
const void __iomem *flash_base, *flash_limit;
|
||||
struct ath25_boarddata *config;
|
||||
unsigned int rcfg_size;
|
||||
int broken_boarddata = 0;
|
||||
const void __iomem *bcfg, *rcfg;
|
||||
u8 *board_data;
|
||||
u8 *radio_data;
|
||||
u8 *mac_addr;
|
||||
u32 offset;
|
||||
|
||||
flash_base = ioremap_nocache(base, size);
|
||||
flash_limit = flash_base + size;
|
||||
|
||||
ath25_board.config = NULL;
|
||||
ath25_board.radio = NULL;
|
||||
|
||||
/* Copy the board and radio data to RAM, because accessing the mapped
|
||||
* memory of the flash directly after booting is not safe */
|
||||
|
||||
/* Try to find valid board and radio data */
|
||||
bcfg = find_board_config(flash_limit, false);
|
||||
|
||||
/* If that fails, try to at least find valid radio data */
|
||||
if (!bcfg) {
|
||||
bcfg = find_board_config(flash_limit, true);
|
||||
broken_boarddata = 1;
|
||||
}
|
||||
|
||||
if (!bcfg) {
|
||||
pr_warn("WARNING: No board configuration data found!\n");
|
||||
goto error;
|
||||
}
|
||||
|
||||
board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
|
||||
ath25_board.config = (struct ath25_boarddata *)board_data;
|
||||
memcpy_fromio(board_data, bcfg, 0x100);
|
||||
if (broken_boarddata) {
|
||||
pr_warn("WARNING: broken board data detected\n");
|
||||
config = ath25_board.config;
|
||||
if (is_zero_ether_addr(config->enet0_mac)) {
|
||||
pr_info("Fixing up empty mac addresses\n");
|
||||
config->reset_config_gpio = 0xffff;
|
||||
config->sys_led_gpio = 0xffff;
|
||||
random_ether_addr(config->wlan0_mac);
|
||||
config->wlan0_mac[0] &= ~0x06;
|
||||
random_ether_addr(config->enet0_mac);
|
||||
random_ether_addr(config->enet1_mac);
|
||||
}
|
||||
}
|
||||
|
||||
/* Radio config starts 0x100 bytes after board config, regardless
|
||||
* of what the physical layout on the flash chip looks like */
|
||||
|
||||
rcfg = find_radio_config(flash_limit, bcfg);
|
||||
if (!rcfg) {
|
||||
pr_warn("WARNING: Could not find Radio Configuration data\n");
|
||||
goto error;
|
||||
}
|
||||
|
||||
radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff);
|
||||
ath25_board.radio = radio_data;
|
||||
offset = radio_data - board_data;
|
||||
pr_info("Radio config found at offset 0x%x (0x%x)\n", rcfg - bcfg,
|
||||
offset);
|
||||
rcfg_size = BOARD_CONFIG_BUFSZ - offset;
|
||||
memcpy_fromio(radio_data, rcfg, rcfg_size);
|
||||
|
||||
mac_addr = &radio_data[0x1d * 2];
|
||||
if (is_broadcast_ether_addr(mac_addr)) {
|
||||
pr_info("Radio MAC is blank; using board-data\n");
|
||||
ether_addr_copy(mac_addr, ath25_board.config->wlan0_mac);
|
||||
}
|
||||
|
||||
iounmap(flash_base);
|
||||
|
||||
return 0;
|
||||
|
||||
error:
|
||||
iounmap(flash_base);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
static void ath25_halt(void)
|
||||
{
|
||||
local_irq_disable();
|
||||
|
|
|
|||
|
|
@ -3,10 +3,13 @@
|
|||
#include <linux/serial_8250.h>
|
||||
#include <asm/bootinfo.h>
|
||||
|
||||
#include <ath25_platform.h>
|
||||
#include "devices.h"
|
||||
#include "ar5312.h"
|
||||
#include "ar2315.h"
|
||||
|
||||
struct ar231x_board_config ath25_board;
|
||||
|
||||
const char *get_system_type(void)
|
||||
{
|
||||
return "Atheros (unknown)";
|
||||
|
|
@ -28,6 +31,18 @@ void __init ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk)
|
|||
early_serial_setup(&s);
|
||||
}
|
||||
|
||||
static int __init ath25_register_devices(void)
|
||||
{
|
||||
if (is_ar5312())
|
||||
ar5312_init_devices();
|
||||
else
|
||||
ar2315_init_devices();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
device_initcall(ath25_register_devices);
|
||||
|
||||
static int __init ath25_arch_init(void)
|
||||
{
|
||||
if (is_ar5312())
|
||||
|
|
|
|||
|
|
@ -7,8 +7,10 @@
|
|||
|
||||
#define ATH25_IRQ_CPU_CLOCK (MIPS_CPU_IRQ_BASE + 7) /* C0_CAUSE: 0x8000 */
|
||||
|
||||
extern struct ar231x_board_config ath25_board;
|
||||
extern void (*ath25_irq_dispatch)(void);
|
||||
|
||||
int ath25_find_config(phys_addr_t offset, unsigned long size);
|
||||
void ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk);
|
||||
|
||||
static inline bool is_ar2315(void)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,73 @@
|
|||
#ifndef __ASM_MACH_ATH25_PLATFORM_H
|
||||
#define __ASM_MACH_ATH25_PLATFORM_H
|
||||
|
||||
#include <linux/etherdevice.h>
|
||||
|
||||
/*
|
||||
* This is board-specific data that is stored in a "fixed" location in flash.
|
||||
* It is shared across operating systems, so it should not be changed lightly.
|
||||
* The main reason we need it is in order to extract the ethernet MAC
|
||||
* address(es).
|
||||
*/
|
||||
struct ath25_boarddata {
|
||||
u32 magic; /* board data is valid */
|
||||
#define ATH25_BD_MAGIC 0x35333131 /* "5311", for all 531x/231x platforms */
|
||||
u16 cksum; /* checksum (starting with BD_REV 2) */
|
||||
u16 rev; /* revision of this struct */
|
||||
#define BD_REV 4
|
||||
char board_name[64]; /* Name of board */
|
||||
u16 major; /* Board major number */
|
||||
u16 minor; /* Board minor number */
|
||||
u32 flags; /* Board configuration */
|
||||
#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
|
||||
#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
|
||||
#define BD_UART1 0x00000004 /* UART1 is stuffed */
|
||||
#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
|
||||
#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
|
||||
#define BD_SYSLED 0x00000020 /* System LED stuffed */
|
||||
#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
|
||||
#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
|
||||
#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
|
||||
#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
|
||||
#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ mem_cap for testing */
|
||||
#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
|
||||
#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
|
||||
#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
|
||||
#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
|
||||
#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
|
||||
#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
|
||||
#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
|
||||
u16 reset_config_gpio; /* Reset factory GPIO pin */
|
||||
u16 sys_led_gpio; /* System LED GPIO pin */
|
||||
|
||||
u32 cpu_freq; /* CPU core frequency in Hz */
|
||||
u32 sys_freq; /* System frequency in Hz */
|
||||
u32 cnt_freq; /* Calculated C0_COUNT frequency */
|
||||
|
||||
u8 wlan0_mac[ETH_ALEN];
|
||||
u8 enet0_mac[ETH_ALEN];
|
||||
u8 enet1_mac[ETH_ALEN];
|
||||
|
||||
u16 pci_id; /* Pseudo PCIID for common code */
|
||||
u16 mem_cap; /* cap bank1 in MB */
|
||||
|
||||
/* version 3 */
|
||||
u8 wlan1_mac[ETH_ALEN]; /* (ar5212) */
|
||||
};
|
||||
|
||||
#define BOARD_CONFIG_BUFSZ 0x1000
|
||||
|
||||
/*
|
||||
* Platform device information for the Wireless MAC
|
||||
*/
|
||||
struct ar231x_board_config {
|
||||
u16 devid;
|
||||
|
||||
/* board config data */
|
||||
struct ath25_boarddata *config;
|
||||
|
||||
/* radio calibration data */
|
||||
const char *radio;
|
||||
};
|
||||
|
||||
#endif /* __ASM_MACH_ATH25_PLATFORM_H */
|
||||
Loading…
Reference in New Issue