regmap: Updates for v3.11

A small but useful set of regmap updates this time around:
 
 - An abstraction for bitfields within a register map contributed by
   Srinivas Kandagatla, allowing drivers to cope more easily when
   hardware designers randomly move things about (mainly when talking
   to things like system controllers).
 
 - Changes from Lars-Peter Clausen to allow the MMIO regmap to be used from
   hard IRQ context.
 
 - Small improvements to the cache infrastructure and performance,
   including a default cache sync operation so now all regmaps can sync
   easily.
 
 There's also a pinctrl driver making use of the new bitfield API, merged
 here for dependency reasons.  There will be a simple add/add conflict
 with the pinctrl tree as a result.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJR0BkmAAoJELSic+t+oim94wgP/A+a0uJNxkQ3VK2myUU42VzA
 LkiSgmpV/IsywyMJjV+/WgSPXv5BALjWdoHqaPGxEzbVTrQdxTVWhrlPsFAu7rLo
 dQXoAXckvyhaw+GlJNpUkpIrNV3qxZN9eT8/Lm16pehXzllZif7CynJk6F5NQgMw
 32HKuNFJxig+NMDzbeID1aSTg5yCsU+TCB40J7naYDAGIBXwNsXwGmVwoTJi6513
 xWEJ8KvQ5F2C5PCUass+9Cozil/H95V1Vvei5qyo7aVG1Z2SF4ueC8sRZgULvTr/
 wpPt/ia8TnjQcjYvnFVWyiiCGDmmYB+CQHxtIjsLVYoaBb2FsLEVfscYD+84+EAz
 mQqEKxLIPfYvzZmU8zxcdXzDkD+Ztm0T8HJWrKwIWfBiKgrSk6R2kegFOrCrqmLX
 cVHW3RXVZM3oW8G9T5FGR5fzh9acnAvvTKstSPnpMXTRLKozPG6G61+FtjDQNvxI
 0IGgNnkZCxGFmVLAxzX/Z4WmuwARO+dSbY2t92qlOhfRLVJ8VR5WVu+ECDYDSBUD
 U0EhXfmu2UJdClY2T+lw3TRo3F7hKHx5+C6cS6pNZC43lKtGWu8qClFmdJ+Y2Pzp
 4yRUvKXjfnyuRNSYaIRcjxJQ7dPVfxsUz3w9cak4V/Gi2u/1cbbTjS+Wob1+jdEu
 9ldwQ9d3gMMVWR5yb/Z4
 =8WLH
 -----END PGP SIGNATURE-----

Merge tag 'regmap-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap

Pull regmap updates from Mark Brown:
 "A small but useful set of regmap updates this time around:

   - An abstraction for bitfields within a register map contributed by
     Srinivas Kandagatla, allowing drivers to cope more easily when
     hardware designers randomly move things about (mainly when talking
     to things like system controllers).

   - Changes from Lars-Peter Clausen to allow the MMIO regmap to be used
     from hard IRQ context.

   - Small improvements to the cache infrastructure and performance,
     including a default cache sync operation so now all regmaps can
     sync easily.

  There's also a pinctrl driver making use of the new bitfield API,
  merged here for dependency reasons.  There will be a simple add/add
  conflict with the pinctrl tree as a result."

* tag 'regmap-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  pinctrl: st: Remove unnecessary use of of_match_ptr macro
  pinctrl: st: fix return value check
  pinctrl: st: Add pinctrl and pinconf support.
  regmap: debugfs: Suppress cache for partial register files
  regmap: Add regmap_field APIs
  regmap: core: Cache all registers by default when cache is enabled
  regmap: Implemented default cache sync operation
  regmap: Make regmap-mmio usable from atomic contexts
  regmap: regcache: Fixup locking for custom lock callbacks
  regmap: debugfs: Fix return from regmap_debugfs_get_dump_start
  regmap: debugfs: Don't mark lockdep as broken due to debugfs write
  regmap: rbtree: Use range information to allocate nodes
  regmap: rbtree: Factor out node allocation
  regmap: Make regmap_check_range_table() a public API
  regmap: Add support for discarding parts of the register cache
This commit is contained in:
Linus Torvalds 2013-07-03 11:40:58 -07:00
commit a6e6d863cf
11 changed files with 1875 additions and 30 deletions

View File

@ -0,0 +1,110 @@
*ST pin controller.
Each multi-function pin is controlled, driven and routed through the
PIO multiplexing block. Each pin supports GPIO functionality (ALT0)
and multiple alternate functions(ALT1 - ALTx) that directly connect
the pin to different hardware blocks.
When a pin is in GPIO mode, Output Enable (OE), Open Drain(OD), and
Pull Up (PU) are driven by the related PIO block.
ST pinctrl driver controls PIO multiplexing block and also interacts with
gpio driver to configure a pin.
Required properties: (PIO multiplexing block)
- compatible : should be "st,<SOC>-<pio-block>-pinctrl"
like st,stih415-sbc-pinctrl, st,stih415-front-pinctrl and so on.
- gpio-controller : Indicates this device is a GPIO controller
- #gpio-cells : Should be one. The first cell is the pin number.
- st,retime-pin-mask : Should be mask to specify which pins can be retimed.
If the property is not present, it is assumed that all the pins in the
bank are capable of retiming. Retiming is mainly used to improve the
IO timing margins of external synchronous interfaces.
- st,bank-name : Should be a name string for this bank as
specified in datasheet.
- st,syscfg : Should be a phandle of the syscfg node.
Example:
pin-controller-sbc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stih415-sbc-pinctrl";
st,syscfg = <&syscfg_sbc>;
ranges = <0 0xfe610000 0x5000>;
PIO0: gpio@fe610000 {
gpio-controller;
#gpio-cells = <1>;
reg = <0 0x100>;
st,bank-name = "PIO0";
};
...
pin-functions nodes follow...
};
Contents of function subnode node:
----------------------
Required properties for pin configuration node:
- st,pins : Child node with list of pins with configuration.
Below is the format of how each pin conf should look like.
<bank offset mux mode rt_type rt_delay rt_clk>
Every PIO is represented with 4-7 parameters depending on retime configuration.
Each parameter is explained as below.
-bank : Should be bank phandle to which this PIO belongs.
-offset : Offset in the PIO bank.
-mux : Should be alternate function number associated this pin.
Use same numbers from datasheet.
-mode :pin configuration is selected from one of the below values.
IN
IN_PU
OUT
BIDIR
BIDIR_PU
-rt_type Retiming Configuration for the pin.
Possible retime configuration are:
------- -------------
value args
------- -------------
NICLK <delay> <clk>
ICLK_IO <delay> <clk>
BYPASS <delay>
DE_IO <delay> <clk>
SE_ICLK_IO <delay> <clk>
SE_NICLK_IO <delay> <clk>
- delay is retime delay in pico seconds as mentioned in data sheet.
- rt_clk :clk to be use for retime.
Possible values are:
CLK_A
CLK_B
CLK_C
CLK_D
Example of mmcclk pin which is a bi-direction pull pu with retime config
as non inverted clock retimed with CLK_B and delay of 0 pico seconds:
pin-controller {
...
mmc0 {
pinctrl_mmc: mmc {
st,pins {
mmcclk = <&PIO13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
...
};
};
...
};
};
sdhci0:sdhci@fe810000{
...
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mmc>;
};

View File

@ -52,6 +52,7 @@ struct regmap_async {
struct regmap {
struct mutex mutex;
spinlock_t spinlock;
unsigned long spinlock_flags;
regmap_lock lock;
regmap_unlock unlock;
void *lock_arg; /* This is passed to lock/unlock functions */
@ -148,6 +149,7 @@ struct regcache_ops {
int (*read)(struct regmap *map, unsigned int reg, unsigned int *value);
int (*write)(struct regmap *map, unsigned int reg, unsigned int value);
int (*sync)(struct regmap *map, unsigned int min, unsigned int max);
int (*drop)(struct regmap *map, unsigned int min, unsigned int max);
};
bool regmap_writeable(struct regmap *map, unsigned int reg);
@ -174,6 +176,14 @@ struct regmap_range_node {
unsigned int window_len;
};
struct regmap_field {
struct regmap *regmap;
unsigned int mask;
/* lsb */
unsigned int shift;
unsigned int reg;
};
#ifdef CONFIG_DEBUG_FS
extern void regmap_debugfs_initcall(void);
extern void regmap_debugfs_init(struct regmap *map, const char *name);

View File

@ -304,6 +304,48 @@ static int regcache_rbtree_insert_to_block(struct regmap *map,
return 0;
}
static struct regcache_rbtree_node *
regcache_rbtree_node_alloc(struct regmap *map, unsigned int reg)
{
struct regcache_rbtree_node *rbnode;
const struct regmap_range *range;
int i;
rbnode = kzalloc(sizeof(*rbnode), GFP_KERNEL);
if (!rbnode)
return NULL;
/* If there is a read table then use it to guess at an allocation */
if (map->rd_table) {
for (i = 0; i < map->rd_table->n_yes_ranges; i++) {
if (regmap_reg_in_range(reg,
&map->rd_table->yes_ranges[i]))
break;
}
if (i != map->rd_table->n_yes_ranges) {
range = &map->rd_table->yes_ranges[i];
rbnode->blklen = range->range_max - range->range_min
+ 1;
rbnode->base_reg = range->range_min;
}
}
if (!rbnode->blklen) {
rbnode->blklen = sizeof(*rbnode);
rbnode->base_reg = reg;
}
rbnode->block = kmalloc(rbnode->blklen * map->cache_word_size,
GFP_KERNEL);
if (!rbnode->block) {
kfree(rbnode);
return NULL;
}
return rbnode;
}
static int regcache_rbtree_write(struct regmap *map, unsigned int reg,
unsigned int value)
{
@ -354,23 +396,15 @@ static int regcache_rbtree_write(struct regmap *map, unsigned int reg,
return 0;
}
}
/* we did not manage to find a place to insert it in an existing
* block so create a new rbnode with a single register in its block.
* This block will get populated further if any other adjacent
* registers get modified in the future.
/* We did not manage to find a place to insert it in
* an existing block so create a new rbnode.
*/
rbnode = kzalloc(sizeof *rbnode, GFP_KERNEL);
rbnode = regcache_rbtree_node_alloc(map, reg);
if (!rbnode)
return -ENOMEM;
rbnode->blklen = sizeof(*rbnode);
rbnode->base_reg = reg;
rbnode->block = kmalloc(rbnode->blklen * map->cache_word_size,
GFP_KERNEL);
if (!rbnode->block) {
kfree(rbnode);
return -ENOMEM;
}
regcache_rbtree_set_register(map, rbnode, 0, value);
regcache_rbtree_set_register(map, rbnode,
reg - rbnode->base_reg, value);
regcache_rbtree_insert(map, &rbtree_ctx->root, rbnode);
rbtree_ctx->cached_rbnode = rbnode;
}

View File

@ -250,6 +250,38 @@ int regcache_write(struct regmap *map,
return 0;
}
static int regcache_default_sync(struct regmap *map, unsigned int min,
unsigned int max)
{
unsigned int reg;
for (reg = min; reg <= max; reg++) {
unsigned int val;
int ret;
if (regmap_volatile(map, reg))
continue;
ret = regcache_read(map, reg, &val);
if (ret)
return ret;
/* Is this the hardware default? If so skip. */
ret = regcache_lookup_reg(map, reg);
if (ret >= 0 && val == map->reg_defaults[ret].def)
continue;
map->cache_bypass = 1;
ret = _regmap_write(map, reg, val);
map->cache_bypass = 0;
if (ret)
return ret;
dev_dbg(map->dev, "Synced register %#x, value %#x\n", reg, val);
}
return 0;
}
/**
* regcache_sync: Sync the register cache with the hardware.
*
@ -268,7 +300,7 @@ int regcache_sync(struct regmap *map)
const char *name;
unsigned int bypass;
BUG_ON(!map->cache_ops || !map->cache_ops->sync);
BUG_ON(!map->cache_ops);
map->lock(map->lock_arg);
/* Remember the initial bypass state */
@ -297,7 +329,10 @@ int regcache_sync(struct regmap *map)
}
map->cache_bypass = 0;
ret = map->cache_ops->sync(map, 0, map->max_register);
if (map->cache_ops->sync)
ret = map->cache_ops->sync(map, 0, map->max_register);
else
ret = regcache_default_sync(map, 0, map->max_register);
if (ret == 0)
map->cache_dirty = false;
@ -331,7 +366,7 @@ int regcache_sync_region(struct regmap *map, unsigned int min,
const char *name;
unsigned int bypass;
BUG_ON(!map->cache_ops || !map->cache_ops->sync);
BUG_ON(!map->cache_ops);
map->lock(map->lock_arg);
@ -346,7 +381,10 @@ int regcache_sync_region(struct regmap *map, unsigned int min,
if (!map->cache_dirty)
goto out;
ret = map->cache_ops->sync(map, min, max);
if (map->cache_ops->sync)
ret = map->cache_ops->sync(map, min, max);
else
ret = regcache_default_sync(map, min, max);
out:
trace_regcache_sync(map->dev, name, "stop region");
@ -358,6 +396,43 @@ out:
}
EXPORT_SYMBOL_GPL(regcache_sync_region);
/**
* regcache_drop_region: Discard part of the register cache
*
* @map: map to operate on
* @min: first register to discard
* @max: last register to discard
*
* Discard part of the register cache.
*
* Return a negative value on failure, 0 on success.
*/
int regcache_drop_region(struct regmap *map, unsigned int min,
unsigned int max)
{
unsigned int reg;
int ret = 0;
if (!map->cache_present && !(map->cache_ops && map->cache_ops->drop))
return -EINVAL;
map->lock(map->lock_arg);
trace_regcache_drop_region(map->dev, min, max);
if (map->cache_present)
for (reg = min; reg < max + 1; reg++)
clear_bit(reg, map->cache_present);
if (map->cache_ops && map->cache_ops->drop)
ret = map->cache_ops->drop(map, min, max);
map->unlock(map->lock_arg);
return ret;
}
EXPORT_SYMBOL_GPL(regcache_drop_region);
/**
* regcache_cache_only: Put a register map into cache only mode
*

View File

@ -84,6 +84,10 @@ static unsigned int regmap_debugfs_get_dump_start(struct regmap *map,
unsigned int fpos_offset;
unsigned int reg_offset;
/* Suppress the cache if we're using a subrange */
if (from)
return from;
/*
* If we don't have a cache build one so we don't have to do a
* linear scan each time.
@ -145,7 +149,7 @@ static unsigned int regmap_debugfs_get_dump_start(struct regmap *map,
reg_offset = fpos_offset / map->debugfs_tot_len;
*pos = c->min + (reg_offset * map->debugfs_tot_len);
mutex_unlock(&map->cache_lock);
return c->base_reg + reg_offset;
return c->base_reg + (reg_offset * map->reg_stride);
}
*pos = c->max;
@ -281,7 +285,7 @@ static ssize_t regmap_map_write_file(struct file *file,
return -EINVAL;
/* Userspace has been fiddling around behind the kernel's back */
add_taint(TAINT_USER, LOCKDEP_NOW_UNRELIABLE);
add_taint(TAINT_USER, LOCKDEP_STILL_OK);
ret = regmap_write(map, reg, value);
if (ret < 0)

View File

@ -65,9 +65,8 @@ bool regmap_reg_in_ranges(unsigned int reg,
}
EXPORT_SYMBOL_GPL(regmap_reg_in_ranges);
static bool _regmap_check_range_table(struct regmap *map,
unsigned int reg,
const struct regmap_access_table *table)
bool regmap_check_range_table(struct regmap *map, unsigned int reg,
const struct regmap_access_table *table)
{
/* Check "no ranges" first */
if (regmap_reg_in_ranges(reg, table->no_ranges, table->n_no_ranges))
@ -80,6 +79,7 @@ static bool _regmap_check_range_table(struct regmap *map,
return regmap_reg_in_ranges(reg, table->yes_ranges,
table->n_yes_ranges);
}
EXPORT_SYMBOL_GPL(regmap_check_range_table);
bool regmap_writeable(struct regmap *map, unsigned int reg)
{
@ -90,7 +90,7 @@ bool regmap_writeable(struct regmap *map, unsigned int reg)
return map->writeable_reg(map->dev, reg);
if (map->wr_table)
return _regmap_check_range_table(map, reg, map->wr_table);
return regmap_check_range_table(map, reg, map->wr_table);
return true;
}
@ -107,7 +107,7 @@ bool regmap_readable(struct regmap *map, unsigned int reg)
return map->readable_reg(map->dev, reg);
if (map->rd_table)
return _regmap_check_range_table(map, reg, map->rd_table);
return regmap_check_range_table(map, reg, map->rd_table);
return true;
}
@ -121,9 +121,12 @@ bool regmap_volatile(struct regmap *map, unsigned int reg)
return map->volatile_reg(map->dev, reg);
if (map->volatile_table)
return _regmap_check_range_table(map, reg, map->volatile_table);
return regmap_check_range_table(map, reg, map->volatile_table);
return true;
if (map->cache_ops)
return false;
else
return true;
}
bool regmap_precious(struct regmap *map, unsigned int reg)
@ -135,7 +138,7 @@ bool regmap_precious(struct regmap *map, unsigned int reg)
return map->precious_reg(map->dev, reg);
if (map->precious_table)
return _regmap_check_range_table(map, reg, map->precious_table);
return regmap_check_range_table(map, reg, map->precious_table);
return false;
}
@ -302,13 +305,16 @@ static void regmap_unlock_mutex(void *__map)
static void regmap_lock_spinlock(void *__map)
{
struct regmap *map = __map;
spin_lock(&map->spinlock);
unsigned long flags;
spin_lock_irqsave(&map->spinlock, flags);
map->spinlock_flags = flags;
}
static void regmap_unlock_spinlock(void *__map)
{
struct regmap *map = __map;
spin_unlock(&map->spinlock);
spin_unlock_irqrestore(&map->spinlock, map->spinlock_flags);
}
static void dev_get_regmap_release(struct device *dev, void *res)
@ -801,6 +807,95 @@ struct regmap *devm_regmap_init(struct device *dev,
}
EXPORT_SYMBOL_GPL(devm_regmap_init);
static void regmap_field_init(struct regmap_field *rm_field,
struct regmap *regmap, struct reg_field reg_field)
{
int field_bits = reg_field.msb - reg_field.lsb + 1;
rm_field->regmap = regmap;
rm_field->reg = reg_field.reg;
rm_field->shift = reg_field.lsb;
rm_field->mask = ((BIT(field_bits) - 1) << reg_field.lsb);
}
/**
* devm_regmap_field_alloc(): Allocate and initialise a register field
* in a register map.
*
* @dev: Device that will be interacted with
* @regmap: regmap bank in which this register field is located.
* @reg_field: Register field with in the bank.
*
* The return value will be an ERR_PTR() on error or a valid pointer
* to a struct regmap_field. The regmap_field will be automatically freed
* by the device management code.
*/
struct regmap_field *devm_regmap_field_alloc(struct device *dev,
struct regmap *regmap, struct reg_field reg_field)
{
struct regmap_field *rm_field = devm_kzalloc(dev,
sizeof(*rm_field), GFP_KERNEL);
if (!rm_field)
return ERR_PTR(-ENOMEM);
regmap_field_init(rm_field, regmap, reg_field);
return rm_field;
}
EXPORT_SYMBOL_GPL(devm_regmap_field_alloc);
/**
* devm_regmap_field_free(): Free register field allocated using
* devm_regmap_field_alloc. Usally drivers need not call this function,
* as the memory allocated via devm will be freed as per device-driver
* life-cyle.
*
* @dev: Device that will be interacted with
* @field: regmap field which should be freed.
*/
void devm_regmap_field_free(struct device *dev,
struct regmap_field *field)
{
devm_kfree(dev, field);
}
EXPORT_SYMBOL_GPL(devm_regmap_field_free);
/**
* regmap_field_alloc(): Allocate and initialise a register field
* in a register map.
*
* @regmap: regmap bank in which this register field is located.
* @reg_field: Register field with in the bank.
*
* The return value will be an ERR_PTR() on error or a valid pointer
* to a struct regmap_field. The regmap_field should be freed by the
* user once its finished working with it using regmap_field_free().
*/
struct regmap_field *regmap_field_alloc(struct regmap *regmap,
struct reg_field reg_field)
{
struct regmap_field *rm_field = kzalloc(sizeof(*rm_field), GFP_KERNEL);
if (!rm_field)
return ERR_PTR(-ENOMEM);
regmap_field_init(rm_field, regmap, reg_field);
return rm_field;
}
EXPORT_SYMBOL_GPL(regmap_field_alloc);
/**
* regmap_field_free(): Free register field allocated using regmap_field_alloc
*
* @field: regmap field which should be freed.
*/
void regmap_field_free(struct regmap_field *field)
{
kfree(field);
}
EXPORT_SYMBOL_GPL(regmap_field_free);
/**
* regmap_reinit_cache(): Reinitialise the current register cache
*
@ -1249,6 +1344,22 @@ int regmap_raw_write(struct regmap *map, unsigned int reg,
}
EXPORT_SYMBOL_GPL(regmap_raw_write);
/**
* regmap_field_write(): Write a value to a single register field
*
* @field: Register field to write to
* @val: Value to be written
*
* A value of zero will be returned on success, a negative errno will
* be returned in error cases.
*/
int regmap_field_write(struct regmap_field *field, unsigned int val)
{
return regmap_update_bits(field->regmap, field->reg,
field->mask, val << field->shift);
}
EXPORT_SYMBOL_GPL(regmap_field_write);
/*
* regmap_bulk_write(): Write multiple registers to the device
*
@ -1531,6 +1642,31 @@ int regmap_raw_read(struct regmap *map, unsigned int reg, void *val,
}
EXPORT_SYMBOL_GPL(regmap_raw_read);
/**
* regmap_field_read(): Read a value to a single register field
*
* @field: Register field to read from
* @val: Pointer to store read value
*
* A value of zero will be returned on success, a negative errno will
* be returned in error cases.
*/
int regmap_field_read(struct regmap_field *field, unsigned int *val)
{
int ret;
unsigned int reg_val;
ret = regmap_read(field->regmap, field->reg, &reg_val);
if (ret != 0)
return ret;
reg_val &= field->mask;
reg_val >>= field->shift;
*val = reg_val;
return ret;
}
EXPORT_SYMBOL_GPL(regmap_field_read);
/**
* regmap_bulk_read(): Read multiple registers from the device
*

View File

@ -169,6 +169,12 @@ config PINCTRL_SUNXI
select PINMUX
select GENERIC_PINCONF
config PINCTRL_ST
bool
depends on OF
select PINMUX
select PINCONF
config PINCTRL_TEGRA
bool
select PINMUX

View File

@ -46,6 +46,7 @@ obj-$(CONFIG_PINCTRL_S3C24XX) += pinctrl-s3c24xx.o
obj-$(CONFIG_PINCTRL_S3C64XX) += pinctrl-s3c64xx.o
obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o
obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o
obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o
obj-$(CONFIG_PLAT_ORION) += mvebu/
obj-$(CONFIG_ARCH_SHMOBILE) += sh-pfc/

1403
drivers/pinctrl/pinctrl-st.c Normal file

File diff suppressed because it is too large Load Diff

View File

@ -23,6 +23,7 @@ struct irq_domain;
struct spi_device;
struct regmap;
struct regmap_range_cfg;
struct regmap_field;
/* An enum of all the supported cache types */
enum regcache_type {
@ -394,10 +395,15 @@ bool regmap_can_raw_write(struct regmap *map);
int regcache_sync(struct regmap *map);
int regcache_sync_region(struct regmap *map, unsigned int min,
unsigned int max);
int regcache_drop_region(struct regmap *map, unsigned int min,
unsigned int max);
void regcache_cache_only(struct regmap *map, bool enable);
void regcache_cache_bypass(struct regmap *map, bool enable);
void regcache_mark_dirty(struct regmap *map);
bool regmap_check_range_table(struct regmap *map, unsigned int reg,
const struct regmap_access_table *table);
int regmap_register_patch(struct regmap *map, const struct reg_default *regs,
int num_regs);
@ -411,6 +417,36 @@ bool regmap_reg_in_ranges(unsigned int reg,
const struct regmap_range *ranges,
unsigned int nranges);
/**
* Description of an register field
*
* @reg: Offset of the register within the regmap bank
* @lsb: lsb of the register field.
* @reg: msb of the register field.
*/
struct reg_field {
unsigned int reg;
unsigned int lsb;
unsigned int msb;
};
#define REG_FIELD(_reg, _lsb, _msb) { \
.reg = _reg, \
.lsb = _lsb, \
.msb = _msb, \
}
struct regmap_field *regmap_field_alloc(struct regmap *regmap,
struct reg_field reg_field);
void regmap_field_free(struct regmap_field *field);
struct regmap_field *devm_regmap_field_alloc(struct device *dev,
struct regmap *regmap, struct reg_field reg_field);
void devm_regmap_field_free(struct device *dev, struct regmap_field *field);
int regmap_field_read(struct regmap_field *field, unsigned int *val);
int regmap_field_write(struct regmap_field *field, unsigned int val);
/**
* Description of an IRQ for the generic regmap irq_chip.
*
@ -562,6 +598,13 @@ static inline int regcache_sync_region(struct regmap *map, unsigned int min,
return -EINVAL;
}
static inline int regcache_drop_region(struct regmap *map, unsigned int min,
unsigned int max)
{
WARN_ONCE(1, "regmap API is disabled");
return -EINVAL;
}
static inline void regcache_cache_only(struct regmap *map, bool enable)
{
WARN_ONCE(1, "regmap API is disabled");

View File

@ -223,6 +223,29 @@ DEFINE_EVENT(regmap_async, regmap_async_complete_done,
);
TRACE_EVENT(regcache_drop_region,
TP_PROTO(struct device *dev, unsigned int from,
unsigned int to),
TP_ARGS(dev, from, to),
TP_STRUCT__entry(
__string( name, dev_name(dev) )
__field( unsigned int, from )
__field( unsigned int, to )
),
TP_fast_assign(
__assign_str(name, dev_name(dev));
__entry->from = from;
__entry->to = to;
),
TP_printk("%s %u-%u", __get_str(name), (unsigned int)__entry->from,
(unsigned int)__entry->to)
);
#endif /* _TRACE_REGMAP_H */
/* This part must be outside protection */