microblaze: Use asm-generic/io.h

Using generic io.h will narrow down code duplication
in architecture io.h.

- define PCI_IOBASE
- remove non existing pci_io_base extern

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

arch/microblaze/include/asm/io.h

@@ -15,7 +15,6 @@
 #include <asm/page.h>
 #include <linux/types.h>
 #include <linux/mm.h>          /* Get struct page {...} */
-#include <asm-generic/iomap.h>
 
 #ifndef CONFIG_PCI
 #define _IO_BASE	0
@@ -25,211 +24,32 @@
 #define _IO_BASE	isa_io_base
 #define _ISA_MEM_BASE	isa_mem_base
 #define PCI_DRAM_OFFSET	pci_dram_offset
-#endif
+struct pci_dev;
+extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
+#define pci_iounmap pci_iounmap
 
 extern unsigned long isa_io_base;
-extern unsigned long pci_io_base;
 extern unsigned long pci_dram_offset;
-
 extern resource_size_t isa_mem_base;
+#endif
 
+#define PCI_IOBASE	((void __iomem *)_IO_BASE)
 #define IO_SPACE_LIMIT (0xFFFFFFFF)
 
-/* the following is needed to support PCI with some drivers */
-
-#define mmiowb()
-
-static inline unsigned char __raw_readb(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned char __force *)addr;
-}
-static inline unsigned short __raw_readw(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned short __force *)addr;
-}
-static inline unsigned int __raw_readl(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned int __force *)addr;
-}
-static inline unsigned long __raw_readq(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned long __force *)addr;
-}
-static inline void __raw_writeb(unsigned char v, volatile void __iomem *addr)
-{
-	*(volatile unsigned char __force *)addr = v;
-}
-static inline void __raw_writew(unsigned short v, volatile void __iomem *addr)
-{
-	*(volatile unsigned short __force *)addr = v;
-}
-static inline void __raw_writel(unsigned int v, volatile void __iomem *addr)
-{
-	*(volatile unsigned int __force *)addr = v;
-}
-static inline void __raw_writeq(unsigned long v, volatile void __iomem *addr)
-{
-	*(volatile unsigned long __force *)addr = v;
-}
-
-/*
- * read (readb, readw, readl, readq) and write (writeb, writew,
- * writel, writeq) accessors are for PCI and thus little endian.
- * Linux 2.4 for Microblaze had this wrong.
- */
-static inline unsigned char readb(const volatile void __iomem *addr)
-{
-	return *(volatile unsigned char __force *)addr;
-}
-static inline unsigned short readw(const volatile void __iomem *addr)
-{
-	return le16_to_cpu(*(volatile unsigned short __force *)addr);
-}
-static inline unsigned int readl(const volatile void __iomem *addr)
-{
-	return le32_to_cpu(*(volatile unsigned int __force *)addr);
-}
-#define readq readq
-static inline u64 readq(const volatile void __iomem *addr)
-{
-	return le64_to_cpu(__raw_readq(addr));
-}
-static inline void writeb(unsigned char v, volatile void __iomem *addr)
-{
-	*(volatile unsigned char __force *)addr = v;
-}
-static inline void writew(unsigned short v, volatile void __iomem *addr)
-{
-	*(volatile unsigned short __force *)addr = cpu_to_le16(v);
-}
-static inline void writel(unsigned int v, volatile void __iomem *addr)
-{
-	*(volatile unsigned int __force *)addr = cpu_to_le32(v);
-}
-#define writeq(b, addr) __raw_writeq(cpu_to_le64(b), addr)
-
-/* ioread and iowrite variants. thease are for now same as __raw_
- * variants of accessors. we might check for endianess in the feature
- */
-#define ioread8(addr)		__raw_readb((u8 *)(addr))
-#define ioread16(addr)		__raw_readw((u16 *)(addr))
-#define ioread32(addr)		__raw_readl((u32 *)(addr))
-#define iowrite8(v, addr)	__raw_writeb((u8)(v), (u8 *)(addr))
-#define iowrite16(v, addr)	__raw_writew((u16)(v), (u16 *)(addr))
-#define iowrite32(v, addr)	__raw_writel((u32)(v), (u32 *)(addr))
-
-#define ioread16be(addr)	__raw_readw((u16 *)(addr))
-#define ioread32be(addr)	__raw_readl((u32 *)(addr))
-#define iowrite16be(v, addr)	__raw_writew((u16)(v), (u16 *)(addr))
-#define iowrite32be(v, addr)	__raw_writel((u32)(v), (u32 *)(addr))
-
-/* These are the definitions for the x86 IO instructions
- * inb/inw/inl/outb/outw/outl, the "string" versions
- * insb/insw/insl/outsb/outsw/outsl, and the "pausing" versions
- * inb_p/inw_p/...
- * The macros don't do byte-swapping.
- */
-#define inb(port)		readb((u8 *)((unsigned long)(port)))
-#define outb(val, port)		writeb((val), (u8 *)((unsigned long)(port)))
-#define inw(port)		readw((u16 *)((unsigned long)(port)))
-#define outw(val, port)		writew((val), (u16 *)((unsigned long)(port)))
-#define inl(port)		readl((u32 *)((unsigned long)(port)))
-#define outl(val, port)		writel((val), (u32 *)((unsigned long)(port)))
-
-#define inb_p(port)		inb((port))
-#define outb_p(val, port)	outb((val), (port))
-#define inw_p(port)		inw((port))
-#define outw_p(val, port)	outw((val), (port))
-#define inl_p(port)		inl((port))
-#define outl_p(val, port)	outl((val), (port))
-
-#define memset_io(a, b, c)	memset((void *)(a), (b), (c))
-#define memcpy_fromio(a, b, c)	memcpy((a), (void *)(b), (c))
-#define memcpy_toio(a, b, c)	memcpy((void *)(a), (b), (c))
-
 #ifdef CONFIG_MMU
-
-#define phys_to_virt(addr)	((void *)__phys_to_virt(addr))
-#define virt_to_phys(addr)	((unsigned long)__virt_to_phys(addr))
-#define virt_to_bus(addr)	((unsigned long)__virt_to_phys(addr))
-
 #define page_to_bus(page)	(page_to_phys(page))
-#define bus_to_virt(addr)	(phys_to_virt(addr))
 
 extern void iounmap(void __iomem *addr);
-/*extern void *__ioremap(phys_addr_t address, unsigned long size,
+
-		unsigned long flags);*/
 extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
-#define ioremap_writethrough(addr, size) ioremap((addr), (size))
+#define ioremap_writethrough(addr, size)	ioremap((addr), (size))
-#define ioremap_nocache(addr, size)      ioremap((addr), (size))
+#define ioremap_nocache(addr, size)		ioremap((addr), (size))
-#define ioremap_fullcache(addr, size)    ioremap((addr), (size))
+#define ioremap_fullcache(addr, size)		ioremap((addr), (size))
-
+#define ioremap_wc(addr, size)			ioremap((addr), (size))
-#else /* CONFIG_MMU */
-
-/**
- *	virt_to_phys - map virtual addresses to physical
- *	@address: address to remap
- *
- *	The returned physical address is the physical (CPU) mapping for
- *	the memory address given. It is only valid to use this function on
- *	addresses directly mapped or allocated via kmalloc.
- *
- *	This function does not give bus mappings for DMA transfers. In
- *	almost all conceivable cases a device driver should not be using
- *	this function
- */
-static inline unsigned long __iomem virt_to_phys(volatile void *address)
-{
-	return __pa((unsigned long)address);
-}
-
-#define virt_to_bus virt_to_phys
-
-/**
- *	phys_to_virt - map physical address to virtual
- *	@address: address to remap
- *
- *	The returned virtual address is a current CPU mapping for
- *	the memory address given. It is only valid to use this function on
- *	addresses that have a kernel mapping
- *
- *	This function does not handle bus mappings for DMA transfers. In
- *	almost all conceivable cases a device driver should not be using
- *	this function
- */
-static inline void *phys_to_virt(unsigned long address)
-{
-	return (void *)__va(address);
-}
-
-#define bus_to_virt(a) phys_to_virt(a)
-
-static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
-			unsigned long flags)
-{
-	return (void *)address;
-}
-
-#define ioremap(physaddr, size)	((void __iomem *)(unsigned long)(physaddr))
-#define iounmap(addr)		((void)0)
-#define ioremap_nocache(physaddr, size)	ioremap(physaddr, size)
 
 #endif /* CONFIG_MMU */
 
-/*
+/* Big Endian */
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p)	__va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p)	p
-
-/*
- * Big Endian
- */
 #define out_be32(a, v) __raw_writel((v), (void __iomem __force *)(a))
 #define out_be16(a, v) __raw_writew((v), (a))
 
@@ -239,10 +59,7 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
 #define writel_be(v, a)	out_be32((__force unsigned *)a, v)
 #define readl_be(a)	in_be32((__force unsigned *)a)
 
-/*
+/* Little endian */
- * Little endian
- */
-
 #define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (a))
 #define out_le16(a, v) __raw_writew(__cpu_to_le16(v), (a))
 
@@ -253,100 +70,7 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
 #define out_8(a, v) __raw_writeb((v), (a))
 #define in_8(a) __raw_readb(a)
 
-#define mmiowb()
+#include <asm-generic/io.h>
-
-#define ioport_map(port, nr)	((void __iomem *)(port))
-#define ioport_unmap(addr)
-
-/* from asm-generic/io.h */
-#ifndef insb
-static inline void insb(unsigned long addr, void *buffer, int count)
-{
-	if (count) {
-		u8 *buf = buffer;
-		do {
-			u8 x = inb(addr);
-			*buf++ = x;
-		} while (--count);
-	}
-}
-#endif
-
-#ifndef insw
-static inline void insw(unsigned long addr, void *buffer, int count)
-{
-	if (count) {
-		u16 *buf = buffer;
-		do {
-			u16 x = inw(addr);
-			*buf++ = x;
-		} while (--count);
-	}
-}
-#endif
-
-#ifndef insl
-static inline void insl(unsigned long addr, void *buffer, int count)
-{
-	if (count) {
-		u32 *buf = buffer;
-		do {
-			u32 x = inl(addr);
-			*buf++ = x;
-		} while (--count);
-	}
-}
-#endif
-
-#ifndef outsb
-static inline void outsb(unsigned long addr, const void *buffer, int count)
-{
-	if (count) {
-		const u8 *buf = buffer;
-		do {
-			outb(*buf++, addr);
-		} while (--count);
-	}
-}
-#endif
-
-#ifndef outsw
-static inline void outsw(unsigned long addr, const void *buffer, int count)
-{
-	if (count) {
-		const u16 *buf = buffer;
-		do {
-			outw(*buf++, addr);
-		} while (--count);
-	}
-}
-#endif
-
-#ifndef outsl
-static inline void outsl(unsigned long addr, const void *buffer, int count)
-{
-	if (count) {
-		const u32 *buf = buffer;
-		do {
-			outl(*buf++, addr);
-		} while (--count);
-	}
-}
-#endif
-
-#define ioread8_rep(p, dst, count) \
-	insb((unsigned long) (p), (dst), (count))
-#define ioread16_rep(p, dst, count) \
-	insw((unsigned long) (p), (dst), (count))
-#define ioread32_rep(p, dst, count) \
-	insl((unsigned long) (p), (dst), (count))
-
-#define iowrite8_rep(p, src, count) \
-	outsb((unsigned long) (p), (src), (count))
-#define iowrite16_rep(p, src, count) \
-	outsw((unsigned long) (p), (src), (count))
-#define iowrite32_rep(p, src, count) \
-	outsl((unsigned long) (p), (src), (count))
 
 #define readb_relaxed	readb
 #define readw_relaxed	readw

arch/microblaze/kernel/signal.c

@@ -216,7 +216,7 @@ static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
 		/* MS: I need add offset in page */
 		address += ((unsigned long)frame->tramp) & ~PAGE_MASK;
 		/* MS address is virtual */
-		address = virt_to_phys(address);
+		address = __virt_to_phys(address);
 		invalidate_icache_range(address, address + 8);
 		flush_dcache_range(address, address + 8);
 	}

arch/microblaze/mm/consistent.c

@@ -117,7 +117,7 @@ void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle)
 	ret = (void *)va;
 
 	/* This gives us the real physical address of the first page. */
-	*dma_handle = pa = virt_to_bus((void *)vaddr);
+	*dma_handle = pa = __virt_to_phys(vaddr);
 #endif
 
 	/*

arch/microblaze/mm/init.c

@@ -369,7 +369,7 @@ asmlinkage void __init mmu_init(void)
 	if (initrd_start) {
 		unsigned long size;
 		size = initrd_end - initrd_start;
-		memblock_reserve(virt_to_phys(initrd_start), size);
+		memblock_reserve(__virt_to_phys(initrd_start), size);
 	}
 #endif /* CONFIG_BLK_DEV_INITRD */
 

arch/microblaze/mm/pgtable.c

@@ -69,10 +69,11 @@ static void __iomem *__ioremap(phys_addr_t addr, unsigned long size,
 	 *
 	 * However, allow remap of rootfs: TBD
 	 */
+
 	if (mem_init_done &&
 		p >= memory_start && p < virt_to_phys(high_memory) &&
-		!(p >= virt_to_phys((unsigned long)&__bss_stop) &&
+		!(p >= __virt_to_phys((phys_addr_t)__bss_stop) &&
-		p < virt_to_phys((unsigned long)__bss_stop))) {
+		p < __virt_to_phys((phys_addr_t)__bss_stop))) {
 		pr_warn("__ioremap(): phys addr "PTE_FMT" is RAM lr %pf\n",
 			(unsigned long)p, __builtin_return_address(0));
 		return NULL;