diff --git a/CREDITS b/CREDITS
index a347520bef2d..5b1edf3a38a2 100644
--- a/CREDITS
+++ b/CREDITS
@@ -2247,6 +2247,12 @@ S: 249 Nichols Avenue
S: Syracuse, New York 13206
S: USA
+N: Kyle McMartin
+E: kyle@parisc-linux.org
+D: Linux/PARISC hacker
+D: AD1889 sound driver
+S: Ottawa, Canada
+
N: Dirk Melchers
E: dirk@merlin.nbg.sub.org
D: 8 bit XT hard disk driver for OMTI5520
diff --git a/Documentation/Changes b/Documentation/Changes
index 27232be26e1a..783ddc3ce4e8 100644
--- a/Documentation/Changes
+++ b/Documentation/Changes
@@ -65,7 +65,7 @@ o isdn4k-utils 3.1pre1 # isdnctrl 2>&1|grep version
o nfs-utils 1.0.5 # showmount --version
o procps 3.2.0 # ps --version
o oprofile 0.9 # oprofiled --version
-o udev 058 # udevinfo -V
+o udev 071 # udevinfo -V
Kernel compilation
==================
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index 375ae760dc1e..d260d92089ad 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -415,6 +415,362 @@ and other resources, etc.
+
+ Error handling
+
+
+ This chapter describes how errors are handled under libata.
+ Readers are advised to read SCSI EH
+ (Documentation/scsi/scsi_eh.txt) and ATA exceptions doc first.
+
+
+ Origins of commands
+
+ In libata, a command is represented with struct ata_queued_cmd
+ or qc. qc's are preallocated during port initialization and
+ repetitively used for command executions. Currently only one
+ qc is allocated per port but yet-to-be-merged NCQ branch
+ allocates one for each tag and maps each qc to NCQ tag 1-to-1.
+
+
+ libata commands can originate from two sources - libata itself
+ and SCSI midlayer. libata internal commands are used for
+ initialization and error handling. All normal blk requests
+ and commands for SCSI emulation are passed as SCSI commands
+ through queuecommand callback of SCSI host template.
+
+
+
+ How commands are issued
+
+
+
+ Internal commands
+
+
+ First, qc is allocated and initialized using
+ ata_qc_new_init(). Although ata_qc_new_init() doesn't
+ implement any wait or retry mechanism when qc is not
+ available, internal commands are currently issued only during
+ initialization and error recovery, so no other command is
+ active and allocation is guaranteed to succeed.
+
+
+ Once allocated qc's taskfile is initialized for the command to
+ be executed. qc currently has two mechanisms to notify
+ completion. One is via qc->complete_fn() callback and the
+ other is completion qc->waiting. qc->complete_fn() callback
+ is the asynchronous path used by normal SCSI translated
+ commands and qc->waiting is the synchronous (issuer sleeps in
+ process context) path used by internal commands.
+
+
+ Once initialization is complete, host_set lock is acquired
+ and the qc is issued.
+
+
+
+
+ SCSI commands
+
+
+ All libata drivers use ata_scsi_queuecmd() as
+ hostt->queuecommand callback. scmds can either be simulated
+ or translated. No qc is involved in processing a simulated
+ scmd. The result is computed right away and the scmd is
+ completed.
+
+
+ For a translated scmd, ata_qc_new_init() is invoked to
+ allocate a qc and the scmd is translated into the qc. SCSI
+ midlayer's completion notification function pointer is stored
+ into qc->scsidone.
+
+
+ qc->complete_fn() callback is used for completion
+ notification. ATA commands use ata_scsi_qc_complete() while
+ ATAPI commands use atapi_qc_complete(). Both functions end up
+ calling qc->scsidone to notify upper layer when the qc is
+ finished. After translation is completed, the qc is issued
+ with ata_qc_issue().
+
+
+ Note that SCSI midlayer invokes hostt->queuecommand while
+ holding host_set lock, so all above occur while holding
+ host_set lock.
+
+
+
+
+
+
+
+ How commands are processed
+
+ Depending on which protocol and which controller are used,
+ commands are processed differently. For the purpose of
+ discussion, a controller which uses taskfile interface and all
+ standard callbacks is assumed.
+
+
+ Currently 6 ATA command protocols are used. They can be
+ sorted into the following four categories according to how
+ they are processed.
+
+
+
+ ATA NO DATA or DMA
+
+
+ ATA_PROT_NODATA and ATA_PROT_DMA fall into this category.
+ These types of commands don't require any software
+ intervention once issued. Device will raise interrupt on
+ completion.
+
+
+
+
+ ATA PIO
+
+
+ ATA_PROT_PIO is in this category. libata currently
+ implements PIO with polling. ATA_NIEN bit is set to turn
+ off interrupt and pio_task on ata_wq performs polling and
+ IO.
+
+
+
+
+ ATAPI NODATA or DMA
+
+
+ ATA_PROT_ATAPI_NODATA and ATA_PROT_ATAPI_DMA are in this
+ category. packet_task is used to poll BSY bit after
+ issuing PACKET command. Once BSY is turned off by the
+ device, packet_task transfers CDB and hands off processing
+ to interrupt handler.
+
+
+
+
+ ATAPI PIO
+
+
+ ATA_PROT_ATAPI is in this category. ATA_NIEN bit is set
+ and, as in ATAPI NODATA or DMA, packet_task submits cdb.
+ However, after submitting cdb, further processing (data
+ transfer) is handed off to pio_task.
+
+
+
+
+
+
+ How commands are completed
+
+ Once issued, all qc's are either completed with
+ ata_qc_complete() or time out. For commands which are handled
+ by interrupts, ata_host_intr() invokes ata_qc_complete(), and,
+ for PIO tasks, pio_task invokes ata_qc_complete(). In error
+ cases, packet_task may also complete commands.
+
+
+ ata_qc_complete() does the following.
+
+
+
+
+
+
+ DMA memory is unmapped.
+
+
+
+
+
+ ATA_QCFLAG_ACTIVE is clared from qc->flags.
+
+
+
+
+
+ qc->complete_fn() callback is invoked. If the return value of
+ the callback is not zero. Completion is short circuited and
+ ata_qc_complete() returns.
+
+
+
+
+
+ __ata_qc_complete() is called, which does
+
+
+
+
+ qc->flags is cleared to zero.
+
+
+
+
+
+ ap->active_tag and qc->tag are poisoned.
+
+
+
+
+
+ qc->waiting is claread & completed (in that order).
+
+
+
+
+
+ qc is deallocated by clearing appropriate bit in ap->qactive.
+
+
+
+
+
+
+
+
+
+
+ So, it basically notifies upper layer and deallocates qc. One
+ exception is short-circuit path in #3 which is used by
+ atapi_qc_complete().
+
+
+ For all non-ATAPI commands, whether it fails or not, almost
+ the same code path is taken and very little error handling
+ takes place. A qc is completed with success status if it
+ succeeded, with failed status otherwise.
+
+
+ However, failed ATAPI commands require more handling as
+ REQUEST SENSE is needed to acquire sense data. If an ATAPI
+ command fails, ata_qc_complete() is invoked with error status,
+ which in turn invokes atapi_qc_complete() via
+ qc->complete_fn() callback.
+
+
+ This makes atapi_qc_complete() set scmd->result to
+ SAM_STAT_CHECK_CONDITION, complete the scmd and return 1. As
+ the sense data is empty but scmd->result is CHECK CONDITION,
+ SCSI midlayer will invoke EH for the scmd, and returning 1
+ makes ata_qc_complete() to return without deallocating the qc.
+ This leads us to ata_scsi_error() with partially completed qc.
+
+
+
+
+ ata_scsi_error()
+
+ ata_scsi_error() is the current hostt->eh_strategy_handler()
+ for libata. As discussed above, this will be entered in two
+ cases - timeout and ATAPI error completion. This function
+ calls low level libata driver's eng_timeout() callback, the
+ standard callback for which is ata_eng_timeout(). It checks
+ if a qc is active and calls ata_qc_timeout() on the qc if so.
+ Actual error handling occurs in ata_qc_timeout().
+
+
+ If EH is invoked for timeout, ata_qc_timeout() stops BMDMA and
+ completes the qc. Note that as we're currently in EH, we
+ cannot call scsi_done. As described in SCSI EH doc, a
+ recovered scmd should be either retried with
+ scsi_queue_insert() or finished with scsi_finish_command().
+ Here, we override qc->scsidone with scsi_finish_command() and
+ calls ata_qc_complete().
+
+
+ If EH is invoked due to a failed ATAPI qc, the qc here is
+ completed but not deallocated. The purpose of this
+ half-completion is to use the qc as place holder to make EH
+ code reach this place. This is a bit hackish, but it works.
+
+
+ Once control reaches here, the qc is deallocated by invoking
+ __ata_qc_complete() explicitly. Then, internal qc for REQUEST
+ SENSE is issued. Once sense data is acquired, scmd is
+ finished by directly invoking scsi_finish_command() on the
+ scmd. Note that as we already have completed and deallocated
+ the qc which was associated with the scmd, we don't need
+ to/cannot call ata_qc_complete() again.
+
+
+
+
+ Problems with the current EH
+
+
+
+
+
+ Error representation is too crude. Currently any and all
+ error conditions are represented with ATA STATUS and ERROR
+ registers. Errors which aren't ATA device errors are treated
+ as ATA device errors by setting ATA_ERR bit. Better error
+ descriptor which can properly represent ATA and other
+ errors/exceptions is needed.
+
+
+
+
+
+ When handling timeouts, no action is taken to make device
+ forget about the timed out command and ready for new commands.
+
+
+
+
+
+ EH handling via ata_scsi_error() is not properly protected
+ from usual command processing. On EH entrance, the device is
+ not in quiescent state. Timed out commands may succeed or
+ fail any time. pio_task and atapi_task may still be running.
+
+
+
+
+
+ Too weak error recovery. Devices / controllers causing HSM
+ mismatch errors and other errors quite often require reset to
+ return to known state. Also, advanced error handling is
+ necessary to support features like NCQ and hotplug.
+
+
+
+
+
+ ATA errors are directly handled in the interrupt handler and
+ PIO errors in pio_task. This is problematic for advanced
+ error handling for the following reasons.
+
+
+ First, advanced error handling often requires context and
+ internal qc execution.
+
+
+ Second, even a simple failure (say, CRC error) needs
+ information gathering and could trigger complex error handling
+ (say, resetting & reconfiguring). Having multiple code
+ paths to gather information, enter EH and trigger actions
+ makes life painful.
+
+
+ Third, scattered EH code makes implementing low level drivers
+ difficult. Low level drivers override libata callbacks. If
+ EH is scattered over several places, each affected callbacks
+ should perform its part of error handling. This can be error
+ prone and painful.
+
+
+
+
+
+
+
libata Library
!Edrivers/scsi/libata-core.c
@@ -431,6 +787,722 @@ and other resources, etc.
!Idrivers/scsi/libata-scsi.c
+
+ ATA errors & exceptions
+
+
+ This chapter tries to identify what error/exception conditions exist
+ for ATA/ATAPI devices and describe how they should be handled in
+ implementation-neutral way.
+
+
+
+ The term 'error' is used to describe conditions where either an
+ explicit error condition is reported from device or a command has
+ timed out.
+
+
+
+ The term 'exception' is either used to describe exceptional
+ conditions which are not errors (say, power or hotplug events), or
+ to describe both errors and non-error exceptional conditions. Where
+ explicit distinction between error and exception is necessary, the
+ term 'non-error exception' is used.
+
+
+
+ Exception categories
+
+ Exceptions are described primarily with respect to legacy
+ taskfile + bus master IDE interface. If a controller provides
+ other better mechanism for error reporting, mapping those into
+ categories described below shouldn't be difficult.
+
+
+
+ In the following sections, two recovery actions - reset and
+ reconfiguring transport - are mentioned. These are described
+ further in .
+
+
+
+ HSM violation
+
+ This error is indicated when STATUS value doesn't match HSM
+ requirement during issuing or excution any ATA/ATAPI command.
+
+
+
+ Examples
+
+
+
+ ATA_STATUS doesn't contain !BSY && DRDY && !DRQ while trying
+ to issue a command.
+
+
+
+
+
+ !BSY && !DRQ during PIO data transfer.
+
+
+
+
+
+ DRQ on command completion.
+
+
+
+
+
+ !BSY && ERR after CDB tranfer starts but before the
+ last byte of CDB is transferred. ATA/ATAPI standard states
+ that "The device shall not terminate the PACKET command
+ with an error before the last byte of the command packet has
+ been written" in the error outputs description of PACKET
+ command and the state diagram doesn't include such
+ transitions.
+
+
+
+
+
+
+ In these cases, HSM is violated and not much information
+ regarding the error can be acquired from STATUS or ERROR
+ register. IOW, this error can be anything - driver bug,
+ faulty device, controller and/or cable.
+
+
+
+ As HSM is violated, reset is necessary to restore known state.
+ Reconfiguring transport for lower speed might be helpful too
+ as transmission errors sometimes cause this kind of errors.
+
+
+
+
+ ATA/ATAPI device error (non-NCQ / non-CHECK CONDITION)
+
+
+ These are errors detected and reported by ATA/ATAPI devices
+ indicating device problems. For this type of errors, STATUS
+ and ERROR register values are valid and describe error
+ condition. Note that some of ATA bus errors are detected by
+ ATA/ATAPI devices and reported using the same mechanism as
+ device errors. Those cases are described later in this
+ section.
+
+
+
+ For ATA commands, this type of errors are indicated by !BSY
+ && ERR during command execution and on completion.
+
+
+ For ATAPI commands,
+
+
+
+
+
+ !BSY && ERR && ABRT right after issuing PACKET
+ indicates that PACKET command is not supported and falls in
+ this category.
+
+
+
+
+
+ !BSY && ERR(==CHK) && !ABRT after the last
+ byte of CDB is transferred indicates CHECK CONDITION and
+ doesn't fall in this category.
+
+
+
+
+
+ !BSY && ERR(==CHK) && ABRT after the last byte
+ of CDB is transferred *probably* indicates CHECK CONDITION and
+ doesn't fall in this category.
+
+
+
+
+
+
+ Of errors detected as above, the followings are not ATA/ATAPI
+ device errors but ATA bus errors and should be handled
+ according to .
+
+
+
+
+
+ CRC error during data transfer
+
+
+ This is indicated by ICRC bit in the ERROR register and
+ means that corruption occurred during data transfer. Upto
+ ATA/ATAPI-7, the standard specifies that this bit is only
+ applicable to UDMA transfers but ATA/ATAPI-8 draft revision
+ 1f says that the bit may be applicable to multiword DMA and
+ PIO.
+
+
+
+
+
+ ABRT error during data transfer or on completion
+
+
+ Upto ATA/ATAPI-7, the standard specifies that ABRT could be
+ set on ICRC errors and on cases where a device is not able
+ to complete a command. Combined with the fact that MWDMA
+ and PIO transfer errors aren't allowed to use ICRC bit upto
+ ATA/ATAPI-7, it seems to imply that ABRT bit alone could
+ indicate tranfer errors.
+
+
+ However, ATA/ATAPI-8 draft revision 1f removes the part
+ that ICRC errors can turn on ABRT. So, this is kind of
+ gray area. Some heuristics are needed here.
+
+
+
+
+
+
+
+ ATA/ATAPI device errors can be further categorized as follows.
+
+
+
+
+
+ Media errors
+
+
+ This is indicated by UNC bit in the ERROR register. ATA
+ devices reports UNC error only after certain number of
+ retries cannot recover the data, so there's nothing much
+ else to do other than notifying upper layer.
+
+
+ READ and WRITE commands report CHS or LBA of the first
+ failed sector but ATA/ATAPI standard specifies that the
+ amount of transferred data on error completion is
+ indeterminate, so we cannot assume that sectors preceding
+ the failed sector have been transferred and thus cannot
+ complete those sectors successfully as SCSI does.
+
+
+
+
+
+ Media changed / media change requested error
+
+
+ <<TODO: fill here>>
+
+
+
+
+ Address error
+
+
+ This is indicated by IDNF bit in the ERROR register.
+ Report to upper layer.
+
+
+
+
+ Other errors
+
+
+ This can be invalid command or parameter indicated by ABRT
+ ERROR bit or some other error condition. Note that ABRT
+ bit can indicate a lot of things including ICRC and Address
+ errors. Heuristics needed.
+
+
+
+
+
+
+
+ Depending on commands, not all STATUS/ERROR bits are
+ applicable. These non-applicable bits are marked with
+ "na" in the output descriptions but upto ATA/ATAPI-7
+ no definition of "na" can be found. However,
+ ATA/ATAPI-8 draft revision 1f describes "N/A" as
+ follows.
+
+
+
+
+ 3.2.3.3a N/A
+
+
+ A keyword the indicates a field has no defined value in
+ this standard and should not be checked by the host or
+ device. N/A fields should be cleared to zero.
+
+
+
+
+
+
+
+ So, it seems reasonable to assume that "na" bits are
+ cleared to zero by devices and thus need no explicit masking.
+
+
+
+
+
+ ATAPI device CHECK CONDITION
+
+
+ ATAPI device CHECK CONDITION error is indicated by set CHK bit
+ (ERR bit) in the STATUS register after the last byte of CDB is
+ transferred for a PACKET command. For this kind of errors,
+ sense data should be acquired to gather information regarding
+ the errors. REQUEST SENSE packet command should be used to
+ acquire sense data.
+
+
+
+ Once sense data is acquired, this type of errors can be
+ handled similary to other SCSI errors. Note that sense data
+ may indicate ATA bus error (e.g. Sense Key 04h HARDWARE ERROR
+ && ASC/ASCQ 47h/00h SCSI PARITY ERROR). In such
+ cases, the error should be considered as an ATA bus error and
+ handled according to .
+
+
+
+
+
+ ATA device error (NCQ)
+
+
+ NCQ command error is indicated by cleared BSY and set ERR bit
+ during NCQ command phase (one or more NCQ commands
+ outstanding). Although STATUS and ERROR registers will
+ contain valid values describing the error, READ LOG EXT is
+ required to clear the error condition, determine which command
+ has failed and acquire more information.
+
+
+
+ READ LOG EXT Log Page 10h reports which tag has failed and
+ taskfile register values describing the error. With this
+ information the failed command can be handled as a normal ATA
+ command error as in and all
+ other in-flight commands must be retried. Note that this
+ retry should not be counted - it's likely that commands
+ retried this way would have completed normally if it were not
+ for the failed command.
+
+
+
+ Note that ATA bus errors can be reported as ATA device NCQ
+ errors. This should be handled as described in .
+
+
+
+ If READ LOG EXT Log Page 10h fails or reports NQ, we're
+ thoroughly screwed. This condition should be treated
+ according to .
+
+
+
+
+
+ ATA bus error
+
+
+ ATA bus error means that data corruption occurred during
+ transmission over ATA bus (SATA or PATA). This type of errors
+ can be indicated by
+
+
+
+
+
+
+ ICRC or ABRT error as described in .
+
+
+
+
+
+ Controller-specific error completion with error information
+ indicating transmission error.
+
+
+
+
+
+ On some controllers, command timeout. In this case, there may
+ be a mechanism to determine that the timeout is due to
+ transmission error.
+
+
+
+
+
+ Unknown/random errors, timeouts and all sorts of weirdities.
+
+
+
+
+
+
+ As described above, transmission errors can cause wide variety
+ of symptoms ranging from device ICRC error to random device
+ lockup, and, for many cases, there is no way to tell if an
+ error condition is due to transmission error or not;
+ therefore, it's necessary to employ some kind of heuristic
+ when dealing with errors and timeouts. For example,
+ encountering repetitive ABRT errors for known supported
+ command is likely to indicate ATA bus error.
+
+
+
+ Once it's determined that ATA bus errors have possibly
+ occurred, lowering ATA bus transmission speed is one of
+ actions which may alleviate the problem. See for more information.
+
+
+
+
+
+ PCI bus error
+
+
+ Data corruption or other failures during transmission over PCI
+ (or other system bus). For standard BMDMA, this is indicated
+ by Error bit in the BMDMA Status register. This type of
+ errors must be logged as it indicates something is very wrong
+ with the system. Resetting host controller is recommended.
+
+
+
+
+
+ Late completion
+
+
+ This occurs when timeout occurs and the timeout handler finds
+ out that the timed out command has completed successfully or
+ with error. This is usually caused by lost interrupts. This
+ type of errors must be logged. Resetting host controller is
+ recommended.
+
+
+
+
+
+ Unknown error (timeout)
+
+
+ This is when timeout occurs and the command is still
+ processing or the host and device are in unknown state. When
+ this occurs, HSM could be in any valid or invalid state. To
+ bring the device to known state and make it forget about the
+ timed out command, resetting is necessary. The timed out
+ command may be retried.
+
+
+
+ Timeouts can also be caused by transmission errors. Refer to
+ for more details.
+
+
+
+
+
+ Hotplug and power management exceptions
+
+
+ <<TODO: fill here>>
+
+
+
+
+
+
+
+ EH recovery actions
+
+
+ This section discusses several important recovery actions.
+
+
+
+ Clearing error condition
+
+
+ Many controllers require its error registers to be cleared by
+ error handler. Different controllers may have different
+ requirements.
+
+
+
+ For SATA, it's strongly recommended to clear at least SError
+ register during error handling.
+
+
+
+
+ Reset
+
+
+ During EH, resetting is necessary in the following cases.
+
+
+
+
+
+
+ HSM is in unknown or invalid state
+
+
+
+
+
+ HBA is in unknown or invalid state
+
+
+
+
+
+ EH needs to make HBA/device forget about in-flight commands
+
+
+
+
+
+ HBA/device behaves weirdly
+
+
+
+
+
+
+ Resetting during EH might be a good idea regardless of error
+ condition to improve EH robustness. Whether to reset both or
+ either one of HBA and device depends on situation but the
+ following scheme is recommended.
+
+
+
+
+
+
+ When it's known that HBA is in ready state but ATA/ATAPI
+ device in in unknown state, reset only device.
+
+
+
+
+
+ If HBA is in unknown state, reset both HBA and device.
+
+
+
+
+
+
+ HBA resetting is implementation specific. For a controller
+ complying to taskfile/BMDMA PCI IDE, stopping active DMA
+ transaction may be sufficient iff BMDMA state is the only HBA
+ context. But even mostly taskfile/BMDMA PCI IDE complying
+ controllers may have implementation specific requirements and
+ mechanism to reset themselves. This must be addressed by
+ specific drivers.
+
+
+
+ OTOH, ATA/ATAPI standard describes in detail ways to reset
+ ATA/ATAPI devices.
+
+
+
+
+ PATA hardware reset
+
+
+ This is hardware initiated device reset signalled with
+ asserted PATA RESET- signal. There is no standard way to
+ initiate hardware reset from software although some
+ hardware provides registers that allow driver to directly
+ tweak the RESET- signal.
+
+
+
+
+ Software reset
+
+
+ This is achieved by turning CONTROL SRST bit on for at
+ least 5us. Both PATA and SATA support it but, in case of
+ SATA, this may require controller-specific support as the
+ second Register FIS to clear SRST should be transmitted
+ while BSY bit is still set. Note that on PATA, this resets
+ both master and slave devices on a channel.
+
+
+
+
+ EXECUTE DEVICE DIAGNOSTIC command
+
+
+ Although ATA/ATAPI standard doesn't describe exactly, EDD
+ implies some level of resetting, possibly similar level
+ with software reset. Host-side EDD protocol can be handled
+ with normal command processing and most SATA controllers
+ should be able to handle EDD's just like other commands.
+ As in software reset, EDD affects both devices on a PATA
+ bus.
+
+
+ Although EDD does reset devices, this doesn't suit error
+ handling as EDD cannot be issued while BSY is set and it's
+ unclear how it will act when device is in unknown/weird
+ state.
+
+
+
+
+ ATAPI DEVICE RESET command
+
+
+ This is very similar to software reset except that reset
+ can be restricted to the selected device without affecting
+ the other device sharing the cable.
+
+
+
+
+ SATA phy reset
+
+
+ This is the preferred way of resetting a SATA device. In
+ effect, it's identical to PATA hardware reset. Note that
+ this can be done with the standard SCR Control register.
+ As such, it's usually easier to implement than software
+ reset.
+
+
+
+
+
+
+
+ One more thing to consider when resetting devices is that
+ resetting clears certain configuration parameters and they
+ need to be set to their previous or newly adjusted values
+ after reset.
+
+
+
+ Parameters affected are.
+
+
+
+
+
+
+ CHS set up with INITIALIZE DEVICE PARAMETERS (seldomly used)
+
+
+
+
+
+ Parameters set with SET FEATURES including transfer mode setting
+
+
+
+
+
+ Block count set with SET MULTIPLE MODE
+
+
+
+
+
+ Other parameters (SET MAX, MEDIA LOCK...)
+
+
+
+
+
+
+ ATA/ATAPI standard specifies that some parameters must be
+ maintained across hardware or software reset, but doesn't
+ strictly specify all of them. Always reconfiguring needed
+ parameters after reset is required for robustness. Note that
+ this also applies when resuming from deep sleep (power-off).
+
+
+
+ Also, ATA/ATAPI standard requires that IDENTIFY DEVICE /
+ IDENTIFY PACKET DEVICE is issued after any configuration
+ parameter is updated or a hardware reset and the result used
+ for further operation. OS driver is required to implement
+ revalidation mechanism to support this.
+
+
+
+
+
+ Reconfigure transport
+
+
+ For both PATA and SATA, a lot of corners are cut for cheap
+ connectors, cables or controllers and it's quite common to see
+ high transmission error rate. This can be mitigated by
+ lowering transmission speed.
+
+
+
+ The following is a possible scheme Jeff Garzik suggested.
+
+
+
+
+ If more than $N (3?) transmission errors happen in 15 minutes,
+
+
+
+
+ if SATA, decrease SATA PHY speed. if speed cannot be decreased,
+
+
+
+
+ decrease UDMA xfer speed. if at UDMA0, switch to PIO4,
+
+
+
+
+ decrease PIO xfer speed. if at PIO3, complain, but continue
+
+
+
+
+
+
+
+
+
+
+
ata_piix Internals
!Idrivers/scsi/ata_piix.c
diff --git a/Documentation/DocBook/writing_usb_driver.tmpl b/Documentation/DocBook/writing_usb_driver.tmpl
index 51f3bfb6fb6e..008a341234d0 100644
--- a/Documentation/DocBook/writing_usb_driver.tmpl
+++ b/Documentation/DocBook/writing_usb_driver.tmpl
@@ -345,8 +345,7 @@ if (!retval) {
static inline void skel_delete (struct usb_skel *dev)
{
- if (dev->bulk_in_buffer != NULL)
- kfree (dev->bulk_in_buffer);
+ kfree (dev->bulk_in_buffer);
if (dev->bulk_out_buffer != NULL)
usb_buffer_free (dev->udev, dev->bulk_out_size,
dev->bulk_out_buffer,
diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt
index 6dd274d7e1cf..2d65c2182161 100644
--- a/Documentation/block/biodoc.txt
+++ b/Documentation/block/biodoc.txt
@@ -906,9 +906,20 @@ Aside:
4. The I/O scheduler
-I/O schedulers are now per queue. They should be runtime switchable and modular
-but aren't yet. Jens has most bits to do this, but the sysfs implementation is
-missing.
+I/O scheduler, a.k.a. elevator, is implemented in two layers. Generic dispatch
+queue and specific I/O schedulers. Unless stated otherwise, elevator is used
+to refer to both parts and I/O scheduler to specific I/O schedulers.
+
+Block layer implements generic dispatch queue in ll_rw_blk.c and elevator.c.
+The generic dispatch queue is responsible for properly ordering barrier
+requests, requeueing, handling non-fs requests and all other subtleties.
+
+Specific I/O schedulers are responsible for ordering normal filesystem
+requests. They can also choose to delay certain requests to improve
+throughput or whatever purpose. As the plural form indicates, there are
+multiple I/O schedulers. They can be built as modules but at least one should
+be built inside the kernel. Each queue can choose different one and can also
+change to another one dynamically.
A block layer call to the i/o scheduler follows the convention elv_xxx(). This
calls elevator_xxx_fn in the elevator switch (drivers/block/elevator.c). Oh,
@@ -921,44 +932,36 @@ keeping work.
The functions an elevator may implement are: (* are mandatory)
elevator_merge_fn called to query requests for merge with a bio
-elevator_merge_req_fn " " " with another request
+elevator_merge_req_fn called when two requests get merged. the one
+ which gets merged into the other one will be
+ never seen by I/O scheduler again. IOW, after
+ being merged, the request is gone.
elevator_merged_fn called when a request in the scheduler has been
involved in a merge. It is used in the deadline
scheduler for example, to reposition the request
if its sorting order has changed.
-*elevator_next_req_fn returns the next scheduled request, or NULL
- if there are none (or none are ready).
+elevator_dispatch_fn fills the dispatch queue with ready requests.
+ I/O schedulers are free to postpone requests by
+ not filling the dispatch queue unless @force
+ is non-zero. Once dispatched, I/O schedulers
+ are not allowed to manipulate the requests -
+ they belong to generic dispatch queue.
-*elevator_add_req_fn called to add a new request into the scheduler
+elevator_add_req_fn called to add a new request into the scheduler
elevator_queue_empty_fn returns true if the merge queue is empty.
Drivers shouldn't use this, but rather check
if elv_next_request is NULL (without losing the
request if one exists!)
-elevator_remove_req_fn This is called when a driver claims ownership of
- the target request - it now belongs to the
- driver. It must not be modified or merged.
- Drivers must not lose the request! A subsequent
- call of elevator_next_req_fn must return the
- _next_ request.
-
-elevator_requeue_req_fn called to add a request to the scheduler. This
- is used when the request has alrnadebeen
- returned by elv_next_request, but hasn't
- completed. If this is not implemented then
- elevator_add_req_fn is called instead.
-
elevator_former_req_fn
elevator_latter_req_fn These return the request before or after the
one specified in disk sort order. Used by the
block layer to find merge possibilities.
-elevator_completed_req_fn called when a request is completed. This might
- come about due to being merged with another or
- when the device completes the request.
+elevator_completed_req_fn called when a request is completed.
elevator_may_queue_fn returns true if the scheduler wants to allow the
current context to queue a new request even if
@@ -967,13 +970,33 @@ elevator_may_queue_fn returns true if the scheduler wants to allow the
elevator_set_req_fn
elevator_put_req_fn Must be used to allocate and free any elevator
- specific storate for a request.
+ specific storage for a request.
+
+elevator_activate_req_fn Called when device driver first sees a request.
+ I/O schedulers can use this callback to
+ determine when actual execution of a request
+ starts.
+elevator_deactivate_req_fn Called when device driver decides to delay
+ a request by requeueing it.
elevator_init_fn
elevator_exit_fn Allocate and free any elevator specific storage
for a queue.
-4.2 I/O scheduler implementation
+4.2 Request flows seen by I/O schedulers
+All requests seens by I/O schedulers strictly follow one of the following three
+flows.
+
+ set_req_fn ->
+
+ i. add_req_fn -> (merged_fn ->)* -> dispatch_fn -> activate_req_fn ->
+ (deactivate_req_fn -> activate_req_fn ->)* -> completed_req_fn
+ ii. add_req_fn -> (merged_fn ->)* -> merge_req_fn
+ iii. [none]
+
+ -> put_req_fn
+
+4.3 I/O scheduler implementation
The generic i/o scheduler algorithm attempts to sort/merge/batch requests for
optimal disk scan and request servicing performance (based on generic
principles and device capabilities), optimized for:
@@ -993,18 +1016,7 @@ request in sort order to prevent binary tree lookups.
This arrangement is not a generic block layer characteristic however, so
elevators may implement queues as they please.
-ii. Last merge hint
-The last merge hint is part of the generic queue layer. I/O schedulers must do
-some management on it. For the most part, the most important thing is to make
-sure q->last_merge is cleared (set to NULL) when the request on it is no longer
-a candidate for merging (for example if it has been sent to the driver).
-
-The last merge performed is cached as a hint for the subsequent request. If
-sequential data is being submitted, the hint is used to perform merges without
-any scanning. This is not sufficient when there are multiple processes doing
-I/O though, so a "merge hash" is used by some schedulers.
-
-iii. Merge hash
+ii. Merge hash
AS and deadline use a hash table indexed by the last sector of a request. This
enables merging code to quickly look up "back merge" candidates, even when
multiple I/O streams are being performed at once on one disk.
@@ -1013,29 +1025,8 @@ multiple I/O streams are being performed at once on one disk.
are far less common than "back merges" due to the nature of most I/O patterns.
Front merges are handled by the binary trees in AS and deadline schedulers.
-iv. Handling barrier cases
-A request with flags REQ_HARDBARRIER or REQ_SOFTBARRIER must not be ordered
-around. That is, they must be processed after all older requests, and before
-any newer ones. This includes merges!
-
-In AS and deadline schedulers, barriers have the effect of flushing the reorder
-queue. The performance cost of this will vary from nothing to a lot depending
-on i/o patterns and device characteristics. Obviously they won't improve
-performance, so their use should be kept to a minimum.
-
-v. Handling insertion position directives
-A request may be inserted with a position directive. The directives are one of
-ELEVATOR_INSERT_BACK, ELEVATOR_INSERT_FRONT, ELEVATOR_INSERT_SORT.
-
-ELEVATOR_INSERT_SORT is a general directive for non-barrier requests.
-ELEVATOR_INSERT_BACK is used to insert a barrier to the back of the queue.
-ELEVATOR_INSERT_FRONT is used to insert a barrier to the front of the queue, and
-overrides the ordering requested by any previous barriers. In practice this is
-harmless and required, because it is used for SCSI requeueing. This does not
-require flushing the reorder queue, so does not impose a performance penalty.
-
-vi. Plugging the queue to batch requests in anticipation of opportunities for
- merge/sort optimizations
+iii. Plugging the queue to batch requests in anticipation of opportunities for
+ merge/sort optimizations
This is just the same as in 2.4 so far, though per-device unplugging
support is anticipated for 2.5. Also with a priority-based i/o scheduler,
@@ -1069,7 +1060,7 @@ Aside:
blk_kick_queue() to unplug a specific queue (right away ?)
or optionally, all queues, is in the plan.
-4.3 I/O contexts
+4.4 I/O contexts
I/O contexts provide a dynamically allocated per process data area. They may
be used in I/O schedulers, and in the block layer (could be used for IO statis,
priorities for example). See *io_context in drivers/block/ll_rw_blk.c, and
diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt
index fabaca1ab1b0..59806c9761f7 100644
--- a/Documentation/driver-model/driver.txt
+++ b/Documentation/driver-model/driver.txt
@@ -14,8 +14,8 @@ struct device_driver {
int (*probe) (struct device * dev);
int (*remove) (struct device * dev);
- int (*suspend) (struct device * dev, pm_message_t state, u32 level);
- int (*resume) (struct device * dev, u32 level);
+ int (*suspend) (struct device * dev, pm_message_t state);
+ int (*resume) (struct device * dev);
};
@@ -194,69 +194,13 @@ device; i.e. anything in the device's driver_data field.
If the device is still present, it should quiesce the device and place
it into a supported low-power state.
- int (*suspend) (struct device * dev, pm_message_t state, u32 level);
+ int (*suspend) (struct device * dev, pm_message_t state);
-suspend is called to put the device in a low power state. There are
-several stages to successfully suspending a device, which is denoted in
-the @level parameter. Breaking the suspend transition into several
-stages affords the platform flexibility in performing device power
-management based on the requirements of the system and the
-user-defined policy.
+suspend is called to put the device in a low power state.
-SUSPEND_NOTIFY notifies the device that a suspend transition is about
-to happen. This happens on system power state transitions to verify
-that all devices can successfully suspend.
+ int (*resume) (struct device * dev);
-A driver may choose to fail on this call, which should cause the
-entire suspend transition to fail. A driver should fail only if it
-knows that the device will not be able to be resumed properly when the
-system wakes up again. It could also fail if it somehow determines it
-is in the middle of an operation too important to stop.
-
-SUSPEND_DISABLE tells the device to stop I/O transactions. When it
-stops transactions, or what it should do with unfinished transactions
-is a policy of the driver. After this call, the driver should not
-accept any other I/O requests.
-
-SUSPEND_SAVE_STATE tells the device to save the context of the
-hardware. This includes any bus-specific hardware state and
-device-specific hardware state. A pointer to this saved state can be
-stored in the device's saved_state field.
-
-SUSPEND_POWER_DOWN tells the driver to place the device in the low
-power state requested.
-
-Whether suspend is called with a given level is a policy of the
-platform. Some levels may be omitted; drivers must not assume the
-reception of any level. However, all levels must be called in the
-order above; i.e. notification will always come before disabling;
-disabling the device will come before suspending the device.
-
-All calls are made with interrupts enabled, except for the
-SUSPEND_POWER_DOWN level.
-
- int (*resume) (struct device * dev, u32 level);
-
-Resume is used to bring a device back from a low power state. Like the
-suspend transition, it happens in several stages.
-
-RESUME_POWER_ON tells the driver to set the power state to the state
-before the suspend call (The device could have already been in a low
-power state before the suspend call to put in a lower power state).
-
-RESUME_RESTORE_STATE tells the driver to restore the state saved by
-the SUSPEND_SAVE_STATE suspend call.
-
-RESUME_ENABLE tells the driver to start accepting I/O transactions
-again. Depending on driver policy, the device may already have pending
-I/O requests.
-
-RESUME_POWER_ON is called with interrupts disabled. The other resume
-levels are called with interrupts enabled.
-
-As with the various suspend stages, the driver must not assume that
-any other resume calls have been or will be made. Each call should be
-self-contained and not dependent on any external state.
+Resume is used to bring a device back from a low power state.
Attributes
diff --git a/Documentation/driver-model/porting.txt b/Documentation/driver-model/porting.txt
index ff2fef2107f0..98b233cb8b36 100644
--- a/Documentation/driver-model/porting.txt
+++ b/Documentation/driver-model/porting.txt
@@ -350,7 +350,7 @@ When a driver is registered, the bus's list of devices is iterated
over. bus->match() is called for each device that is not already
claimed by a driver.
-When a device is successfully bound to a device, device->driver is
+When a device is successfully bound to a driver, device->driver is
set, the device is added to a per-driver list of devices, and a
symlink is created in the driver's sysfs directory that points to the
device's physical directory:
diff --git a/Documentation/hwmon/it87 b/Documentation/hwmon/it87
index 0d0195040d88..7f42e441c645 100644
--- a/Documentation/hwmon/it87
+++ b/Documentation/hwmon/it87
@@ -4,18 +4,18 @@ Kernel driver it87
Supported chips:
* IT8705F
Prefix: 'it87'
- Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports)
+ Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: Publicly available at the ITE website
http://www.ite.com.tw/
* IT8712F
Prefix: 'it8712'
Addresses scanned: I2C 0x28 - 0x2f
- from Super I/O config space, or default ISA 0x290 (8 I/O ports)
+ from Super I/O config space (8 I/O ports)
Datasheet: Publicly available at the ITE website
http://www.ite.com.tw/
* SiS950 [clone of IT8705F]
- Prefix: 'sis950'
- Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports)
+ Prefix: 'it87'
+ Addresses scanned: from Super I/O config space (8 I/O ports)
Datasheet: No longer be available
Author: Christophe Gauthron
diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90
index 2c4cf39471f4..438cb24cee5b 100644
--- a/Documentation/hwmon/lm90
+++ b/Documentation/hwmon/lm90
@@ -24,14 +24,14 @@ Supported chips:
http://www.national.com/pf/LM/LM86.html
* Analog Devices ADM1032
Prefix: 'adm1032'
- Addresses scanned: I2C 0x4c
+ Addresses scanned: I2C 0x4c and 0x4d
Datasheet: Publicly available at the Analog Devices website
- http://products.analog.com/products/info.asp?product=ADM1032
+ http://www.analog.com/en/prod/0,2877,ADM1032,00.html
* Analog Devices ADT7461
Prefix: 'adt7461'
- Addresses scanned: I2C 0x4c
+ Addresses scanned: I2C 0x4c and 0x4d
Datasheet: Publicly available at the Analog Devices website
- http://products.analog.com/products/info.asp?product=ADT7461
+ http://www.analog.com/en/prod/0,2877,ADT7461,00.html
Note: Only if in ADM1032 compatibility mode
* Maxim MAX6657
Prefix: 'max6657'
@@ -71,8 +71,8 @@ increased resolution of the remote temperature measurement.
The different chipsets of the family are not strictly identical, although
very similar. This driver doesn't handle any specific feature for now,
-but could if there ever was a need for it. For reference, here comes a
-non-exhaustive list of specific features:
+with the exception of SMBus PEC. For reference, here comes a non-exhaustive
+list of specific features:
LM90:
* Filter and alert configuration register at 0xBF.
@@ -91,6 +91,7 @@ ADM1032:
* Conversion averaging.
* Up to 64 conversions/s.
* ALERT is triggered by open remote sensor.
+ * SMBus PEC support for Write Byte and Receive Byte transactions.
ADT7461
* Extended temperature range (breaks compatibility)
@@ -119,3 +120,37 @@ The lm90 driver will not update its values more frequently than every
other second; reading them more often will do no harm, but will return
'old' values.
+PEC Support
+-----------
+
+The ADM1032 is the only chip of the family which supports PEC. It does
+not support PEC on all transactions though, so some care must be taken.
+
+When reading a register value, the PEC byte is computed and sent by the
+ADM1032 chip. However, in the case of a combined transaction (SMBus Read
+Byte), the ADM1032 computes the CRC value over only the second half of
+the message rather than its entirety, because it thinks the first half
+of the message belongs to a different transaction. As a result, the CRC
+value differs from what the SMBus master expects, and all reads fail.
+
+For this reason, the lm90 driver will enable PEC for the ADM1032 only if
+the bus supports the SMBus Send Byte and Receive Byte transaction types.
+These transactions will be used to read register values, instead of
+SMBus Read Byte, and PEC will work properly.
+
+Additionally, the ADM1032 doesn't support SMBus Send Byte with PEC.
+Instead, it will try to write the PEC value to the register (because the
+SMBus Send Byte transaction with PEC is similar to a Write Byte transaction
+without PEC), which is not what we want. Thus, PEC is explicitely disabled
+on SMBus Send Byte transactions in the lm90 driver.
+
+PEC on byte data transactions represents a significant increase in bandwidth
+usage (+33% for writes, +25% for reads) in normal conditions. With the need
+to use two SMBus transaction for reads, this overhead jumps to +50%. Worse,
+two transactions will typically mean twice as much delay waiting for
+transaction completion, effectively doubling the register cache refresh time.
+I guess reliability comes at a price, but it's quite expensive this time.
+
+So, as not everyone might enjoy the slowdown, PEC can be disabled through
+sysfs. Just write 0 to the "pec" file and PEC will be disabled. Write 1
+to that file to enable PEC again.
diff --git a/Documentation/hwmon/smsc47b397 b/Documentation/hwmon/smsc47b397
index da9d80c96432..20682f15ae41 100644
--- a/Documentation/hwmon/smsc47b397
+++ b/Documentation/hwmon/smsc47b397
@@ -3,6 +3,7 @@ Kernel driver smsc47b397
Supported chips:
* SMSC LPC47B397-NC
+ * SMSC SCH5307-NS
Prefix: 'smsc47b397'
Addresses scanned: none, address read from Super I/O config space
Datasheet: In this file
@@ -12,11 +13,14 @@ Authors: Mark M. Hoffman
November 23, 2004
-The following specification describes the SMSC LPC47B397-NC sensor chip
+The following specification describes the SMSC LPC47B397-NC[1] sensor chip
(for which there is no public datasheet available). This document was
provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected
by Mark M. Hoffman .
+[1] And SMSC SCH5307-NS, which has a different device ID but is otherwise
+compatible.
+
* * * * *
Methods for detecting the HP SIO and reading the thermal data on a dc7100.
@@ -127,7 +131,7 @@ OUT DX,AL
The registers of interest for identifying the SIO on the dc7100 are Device ID
(0x20) and Device Rev (0x21).
-The Device ID will read 0X6F
+The Device ID will read 0x6F (for SCH5307-NS, 0x81)
The Device Rev currently reads 0x01
Obtaining the HWM Base Address.
diff --git a/Documentation/hwmon/smsc47m1 b/Documentation/hwmon/smsc47m1
index 34e6478c1425..c15bbe68264e 100644
--- a/Documentation/hwmon/smsc47m1
+++ b/Documentation/hwmon/smsc47m1
@@ -12,6 +12,10 @@ Supported chips:
http://www.smsc.com/main/datasheets/47m14x.pdf
http://www.smsc.com/main/tools/discontinued/47m15x.pdf
http://www.smsc.com/main/datasheets/47m192.pdf
+ * SMSC LPC47M997
+ Addresses scanned: none, address read from Super I/O config space
+ Prefix: 'smsc47m1'
+ Datasheet: none
Authors:
Mark D. Studebaker ,
@@ -30,6 +34,9 @@ The 47M15x and 47M192 chips contain a full 'hardware monitoring block'
in addition to the fan monitoring and control. The hardware monitoring
block is not supported by the driver.
+No documentation is available for the 47M997, but it has the same device
+ID as the 47M15x and 47M192 chips and seems to be compatible.
+
Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
triggered if the rotation speed has dropped below a programmable limit. Fan
readings can be divided by a programmable divider (1, 2, 4 or 8) to give
diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface
index 346400519d0d..764cdc5480e7 100644
--- a/Documentation/hwmon/sysfs-interface
+++ b/Documentation/hwmon/sysfs-interface
@@ -272,3 +272,6 @@ beep_mask Bitmask for beep.
eeprom Raw EEPROM data in binary form.
Read only.
+
+pec Enable or disable PEC (SMBus only)
+ Read/Write
diff --git a/Documentation/hwmon/via686a b/Documentation/hwmon/via686a
index b82014cb7c53..a936fb3824b2 100644
--- a/Documentation/hwmon/via686a
+++ b/Documentation/hwmon/via686a
@@ -18,8 +18,9 @@ Authors:
Module Parameters
-----------------
-force_addr=0xaddr Set the I/O base address. Useful for Asus A7V boards
- that don't set the address in the BIOS. Does not do a
+force_addr=0xaddr Set the I/O base address. Useful for boards that
+ don't set the address in the BIOS. Look for a BIOS
+ upgrade before resorting to this. Does not do a
PCI force; the via686a must still be present in lspci.
Don't use this unless the driver complains that the
base address is not set.
@@ -63,3 +64,15 @@ miss once-only alarms.
The driver only updates its values each 1.5 seconds; reading it more often
will do no harm, but will return 'old' values.
+
+Known Issues
+------------
+
+This driver handles sensors integrated in some VIA south bridges. It is
+possible that a motherboard maker used a VT82C686A/B chip as part of a
+product design but was not interested in its hardware monitoring features,
+in which case the sensor inputs will not be wired. This is the case of
+the Asus K7V, A7V and A7V133 motherboards, to name only a few of them.
+So, if you need the force_addr parameter, and end up with values which
+don't seem to make any sense, don't look any further: your chip is simply
+not wired for hardware monitoring.
diff --git a/Documentation/i2c/busses/i2c-i810 b/Documentation/i2c/busses/i2c-i810
index 0544eb332887..83c3b9743c3c 100644
--- a/Documentation/i2c/busses/i2c-i810
+++ b/Documentation/i2c/busses/i2c-i810
@@ -2,6 +2,7 @@ Kernel driver i2c-i810
Supported adapters:
* Intel 82810, 82810-DC100, 82810E, and 82815 (GMCH)
+ * Intel 82845G (GMCH)
Authors:
Frodo Looijaard ,
diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro
index 702f5ac68c09..9363b8bd6109 100644
--- a/Documentation/i2c/busses/i2c-viapro
+++ b/Documentation/i2c/busses/i2c-viapro
@@ -4,17 +4,18 @@ Supported adapters:
* VIA Technologies, Inc. VT82C596A/B
Datasheet: Sometimes available at the VIA website
- * VIA Technologies, Inc. VT82C686A/B
+ * VIA Technologies, Inc. VT82C686A/B
Datasheet: Sometimes available at the VIA website
* VIA Technologies, Inc. VT8231, VT8233, VT8233A, VT8235, VT8237
Datasheet: available on request from Via
Authors:
- Frodo Looijaard ,
- Philip Edelbrock ,
- Kyösti Mälkki ,
- Mark D. Studebaker
+ Frodo Looijaard ,
+ Philip Edelbrock ,
+ Kyösti Mälkki ,
+ Mark D. Studebaker ,
+ Jean Delvare
Module Parameters
-----------------
@@ -28,20 +29,22 @@ Description
-----------
i2c-viapro is a true SMBus host driver for motherboards with one of the
-supported VIA southbridges.
+supported VIA south bridges.
Your lspci -n listing must show one of these :
- device 1106:3050 (VT82C596 function 3)
- device 1106:3051 (VT82C596 function 3)
+ device 1106:3050 (VT82C596A function 3)
+ device 1106:3051 (VT82C596B function 3)
device 1106:3057 (VT82C686 function 4)
device 1106:3074 (VT8233)
device 1106:3147 (VT8233A)
- device 1106:8235 (VT8231)
- devide 1106:3177 (VT8235)
- devide 1106:3227 (VT8237)
+ device 1106:8235 (VT8231 function 4)
+ device 1106:3177 (VT8235)
+ device 1106:3227 (VT8237R)
If none of these show up, you should look in the BIOS for settings like
enable ACPI / SMBus or even USB.
-
+Except for the oldest chips (VT82C596A/B, VT82C686A and most probably
+VT8231), this driver supports I2C block transactions. Such transactions
+are mainly useful to read from and write to EEPROMs.
diff --git a/Documentation/i2c/chips/x1205 b/Documentation/i2c/chips/x1205
new file mode 100644
index 000000000000..09407c991fe5
--- /dev/null
+++ b/Documentation/i2c/chips/x1205
@@ -0,0 +1,38 @@
+Kernel driver x1205
+===================
+
+Supported chips:
+ * Xicor X1205 RTC
+ Prefix: 'x1205'
+ Addresses scanned: none
+ Datasheet: http://www.intersil.com/cda/deviceinfo/0,1477,X1205,00.html
+
+Authors:
+ Karen Spearel ,
+ Alessandro Zummo
+
+Description
+-----------
+
+This module aims to provide complete access to the Xicor X1205 RTC.
+Recently Xicor has merged with Intersil, but the chip is
+still sold under the Xicor brand.
+
+This chip is located at address 0x6f and uses a 2-byte register addressing.
+Two bytes need to be written to read a single register, while most
+other chips just require one and take the second one as the data
+to be written. To prevent corrupting unknown chips, the user must
+explicitely set the probe parameter.
+
+example:
+
+modprobe x1205 probe=0,0x6f
+
+The module supports one more option, hctosys, which is used to set the
+software clock from the x1205. On systems where the x1205 is the
+only hardware rtc, this parameter could be used to achieve a correct
+date/time earlier in the system boot sequence.
+
+example:
+
+modprobe x1205 probe=0,0x6f hctosys=1
diff --git a/Documentation/i2c/functionality b/Documentation/i2c/functionality
index 41ffefbdc60c..60cca249e452 100644
--- a/Documentation/i2c/functionality
+++ b/Documentation/i2c/functionality
@@ -17,9 +17,10 @@ For the most up-to-date list of functionality constants, please check
I2C_FUNC_I2C Plain i2c-level commands (Pure SMBus
adapters typically can not do these)
I2C_FUNC_10BIT_ADDR Handles the 10-bit address extensions
- I2C_FUNC_PROTOCOL_MANGLING Knows about the I2C_M_REV_DIR_ADDR,
- I2C_M_REV_DIR_ADDR and I2C_M_REV_DIR_NOSTART
- flags (which modify the i2c protocol!)
+ I2C_FUNC_PROTOCOL_MANGLING Knows about the I2C_M_IGNORE_NAK,
+ I2C_M_REV_DIR_ADDR, I2C_M_NOSTART and
+ I2C_M_NO_RD_ACK flags (which modify the
+ I2C protocol!)
I2C_FUNC_SMBUS_QUICK Handles the SMBus write_quick command
I2C_FUNC_SMBUS_READ_BYTE Handles the SMBus read_byte command
I2C_FUNC_SMBUS_WRITE_BYTE Handles the SMBus write_byte command
diff --git a/Documentation/i2c/porting-clients b/Documentation/i2c/porting-clients
index 4849dfd6961c..184fac2377aa 100644
--- a/Documentation/i2c/porting-clients
+++ b/Documentation/i2c/porting-clients
@@ -82,7 +82,7 @@ Technical changes:
exit and exit_free. For i2c+isa drivers, labels should be named
ERROR0, ERROR1 and ERROR2. Don't forget to properly set err before
jumping to error labels. By the way, labels should be left-aligned.
- Use memset to fill the client and data area with 0x00.
+ Use kzalloc instead of kmalloc.
Use i2c_set_clientdata to set the client data (as opposed to
a direct access to client->data).
Use strlcpy instead of strcpy to copy the client name.
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index 077275722a7c..e94d9c6cc522 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -33,8 +33,8 @@ static struct i2c_driver foo_driver = {
.command = &foo_command /* may be NULL */
}
-The name can be chosen freely, and may be upto 40 characters long. Please
-use something descriptive here.
+The name field must match the driver name, including the case. It must not
+contain spaces, and may be up to 31 characters long.
Don't worry about the flags field; just put I2C_DF_NOTIFY into it. This
means that your driver will be notified when new adapters are found.
@@ -43,9 +43,6 @@ This is almost always what you want.
All other fields are for call-back functions which will be explained
below.
-There use to be two additional fields in this structure, inc_use et dec_use,
-for module usage count, but these fields were obsoleted and removed.
-
Extra client data
=================
@@ -58,6 +55,7 @@ be very useful.
An example structure is below.
struct foo_data {
+ struct i2c_client client;
struct semaphore lock; /* For ISA access in `sensors' drivers. */
int sysctl_id; /* To keep the /proc directory entry for
`sensors' drivers. */
@@ -310,22 +308,15 @@ For now, you can ignore the `flags' parameter. It is there for future use.
client structure, even though we cannot fill it completely yet.
But it allows us to access several i2c functions safely */
- /* Note that we reserve some space for foo_data too. If you don't
- need it, remove it. We do it here to help to lessen memory
- fragmentation. */
- if (! (new_client = kmalloc(sizeof(struct i2c_client) +
- sizeof(struct foo_data),
- GFP_KERNEL))) {
+ if (!(data = kzalloc(sizeof(struct foo_data), GFP_KERNEL))) {
err = -ENOMEM;
goto ERROR0;
}
- /* This is tricky, but it will set the data to the right value. */
- client->data = new_client + 1;
- data = (struct foo_data *) (client->data);
+ new_client = &data->client;
+ i2c_set_clientdata(new_client, data);
new_client->addr = address;
- new_client->data = data;
new_client->adapter = adapter;
new_client->driver = &foo_driver;
new_client->flags = 0;
@@ -451,7 +442,7 @@ much simpler than the attachment code, fortunately!
release_region(client->addr,LM78_EXTENT);
/* HYBRID SENSORS CHIP ONLY END */
- kfree(client); /* Frees client data too, if allocated at the same time */
+ kfree(data);
return 0;
}
@@ -576,12 +567,12 @@ SMBus communication
extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
u8 command, u8 length,
u8 *values);
+ extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
+ u8 command, u8 *values);
These ones were removed in Linux 2.6.10 because they had no users, but could
be added back later if needed:
- extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
- u8 command, u8 *values);
extern s32 i2c_smbus_read_block_data(struct i2c_client * client,
u8 command, u8 *values);
extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index a55f0f95b171..b0fe41da007b 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -777,7 +777,7 @@ doing so is the same as described in the "Configuring Multiple Bonds
Manually" section, below.
NOTE: It has been observed that some Red Hat supplied kernels
-are apparently unable to rename modules at load time (the "-obonding1"
+are apparently unable to rename modules at load time (the "-o bond1"
part). Attempts to pass that option to modprobe will produce an
"Operation not permitted" error. This has been reported on some
Fedora Core kernels, and has been seen on RHEL 4 as well. On kernels
@@ -883,7 +883,8 @@ the above does not work, and the second bonding instance never sees
its options. In that case, the second options line can be substituted
as follows:
-install bonding1 /sbin/modprobe bonding -obond1 mode=balance-alb miimon=50
+install bond1 /sbin/modprobe --ignore-install bonding -o bond1 \
+ mode=balance-alb miimon=50
This may be repeated any number of times, specifying a new and
unique name in place of bond1 for each subsequent instance.
diff --git a/MAINTAINERS b/MAINTAINERS
index 767fb610963e..3928dc7d6ea9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -197,6 +197,15 @@ M: Thorsten Knabe
W: http://linux.thorsten-knabe.de
S: Maintained
+AD1889 SOUND DRIVER
+P: Kyle McMartin
+M: kyle@parisc-linux.org
+P: Thibaut Varene
+M: T-Bone@parisc-linux.org
+W: http://wiki.parisc-linux.org/AD1889
+L: parisc-linux@lists.parisc-linux.org
+S: Maintained
+
ADM1025 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
@@ -2727,6 +2736,12 @@ P: Roger Luethi
M: rl@hellgate.ch
S: Maintained
+VIAPRO SMBUS DRIVER
+P: Jean Delvare
+M: khali@linux-fr.org
+L: lm-sensors@lm-sensors.org
+S: Maintained
+
UCLINUX (AND M68KNOMMU)
P: Greg Ungerer
M: gerg@uclinux.org
diff --git a/Makefile b/Makefile
index 4a7000e353b5..79601320ac3e 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 14
-EXTRAVERSION =-rc5
+EXTRAVERSION =
NAME=Affluent Albatross
# *DOCUMENTATION*
@@ -334,7 +334,7 @@ KALLSYMS = scripts/kallsyms
PERL = perl
CHECK = sparse
-CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ $(CF)
+CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ -Wbitwise $(CF)
MODFLAGS = -DMODULE
CFLAGS_MODULE = $(MODFLAGS)
AFLAGS_MODULE = $(MODFLAGS)
@@ -371,8 +371,8 @@ export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_ve
# Files to ignore in find ... statements
-RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg \) -prune -o
-export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg
+RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg -o -name .git \) -prune -o
+export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn --exclude CVS --exclude .pc --exclude .hg --exclude .git
# ===========================================================================
# Rules shared between *config targets and build targets
diff --git a/arch/alpha/kernel/pci-noop.c b/arch/alpha/kernel/pci-noop.c
index 582a3519fb28..9903e3a79102 100644
--- a/arch/alpha/kernel/pci-noop.c
+++ b/arch/alpha/kernel/pci-noop.c
@@ -154,7 +154,7 @@ pci_dma_supported(struct pci_dev *hwdev, dma_addr_t mask)
void *
dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int gfp)
+ dma_addr_t *dma_handle, gfp_t gfp)
{
void *ret;
diff --git a/arch/alpha/kernel/pci_iommu.c b/arch/alpha/kernel/pci_iommu.c
index 7cb23f12ecbd..c468e312e5f8 100644
--- a/arch/alpha/kernel/pci_iommu.c
+++ b/arch/alpha/kernel/pci_iommu.c
@@ -397,7 +397,7 @@ pci_alloc_consistent(struct pci_dev *pdev, size_t size, dma_addr_t *dma_addrp)
{
void *cpu_addr;
long order = get_order(size);
- int gfp = GFP_ATOMIC;
+ gfp_t gfp = GFP_ATOMIC;
try_again:
cpu_addr = (void *)__get_free_pages(gfp, order);
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 11fff042aa81..682367bd0f65 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -204,6 +204,7 @@ config ARCH_H720X
config ARCH_AAEC2000
bool "Agilent AAEC-2000 based"
+ select ARM_AMBA
help
This enables support for systems based on the Agilent AAEC-2000
@@ -687,7 +688,8 @@ source "drivers/acorn/block/Kconfig"
if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
|| ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
- || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
+ || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE \
+ || MACH_MP1000
source "drivers/ide/Kconfig"
endif
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 7c7f475e213e..a54d2eb64892 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -39,7 +39,8 @@
defined(CONFIG_ARCH_IXP4XX) || \
defined(CONFIG_ARCH_IXP2000) || \
defined(CONFIG_ARCH_LH7A40X) || \
- defined(CONFIG_ARCH_OMAP)
+ defined(CONFIG_ARCH_OMAP) || \
+ defined(CONFIG_MACH_MP1000)
.macro loadsp, rb
addruart \rb
.endm
diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c
index e8053d16829b..5cdb4122f057 100644
--- a/arch/arm/common/locomo.c
+++ b/arch/arm/common/locomo.c
@@ -550,15 +550,12 @@ struct locomo_save_data {
u16 LCM_SPIMD;
};
-static int locomo_suspend(struct device *dev, pm_message_t state, u32 level)
+static int locomo_suspend(struct device *dev, pm_message_t state)
{
struct locomo *lchip = dev_get_drvdata(dev);
struct locomo_save_data *save;
unsigned long flags;
- if (level != SUSPEND_DISABLE)
- return 0;
-
save = kmalloc(sizeof(struct locomo_save_data), GFP_KERNEL);
if (!save)
return -ENOMEM;
@@ -597,16 +594,13 @@ static int locomo_suspend(struct device *dev, pm_message_t state, u32 level)
return 0;
}
-static int locomo_resume(struct device *dev, u32 level)
+static int locomo_resume(struct device *dev)
{
struct locomo *lchip = dev_get_drvdata(dev);
struct locomo_save_data *save;
unsigned long r;
unsigned long flags;
- if (level != RESUME_ENABLE)
- return 0;
-
save = (struct locomo_save_data *) dev->power.saved_state;
if (!save)
return 0;
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 1a47fbf9cbbc..21e2a518ad3a 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -801,7 +801,7 @@ struct sa1111_save_data {
#ifdef CONFIG_PM
-static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level)
+static int sa1111_suspend(struct device *dev, pm_message_t state)
{
struct sa1111 *sachip = dev_get_drvdata(dev);
struct sa1111_save_data *save;
@@ -809,9 +809,6 @@ static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level)
unsigned int val;
void __iomem *base;
- if (level != SUSPEND_DISABLE)
- return 0;
-
save = kmalloc(sizeof(struct sa1111_save_data), GFP_KERNEL);
if (!save)
return -ENOMEM;
@@ -856,23 +853,19 @@ static int sa1111_suspend(struct device *dev, pm_message_t state, u32 level)
/*
* sa1111_resume - Restore the SA1111 device state.
* @dev: device to restore
- * @level: resume level
*
* Restore the general state of the SA1111; clock control and
* interrupt controller. Other parts of the SA1111 must be
* restored by their respective drivers, and must be called
* via LDM after this function.
*/
-static int sa1111_resume(struct device *dev, u32 level)
+static int sa1111_resume(struct device *dev)
{
struct sa1111 *sachip = dev_get_drvdata(dev);
struct sa1111_save_data *save;
unsigned long flags, id;
void __iomem *base;
- if (level != RESUME_ENABLE)
- return 0;
-
save = (struct sa1111_save_data *)dev->power.saved_state;
if (!save)
return 0;
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 9e5245c702de..e8356b76d7c6 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -102,26 +102,24 @@ static void check_scoop_reg(struct scoop_dev *sdev)
}
#ifdef CONFIG_PM
-static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level)
+static int scoop_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN) {
- struct scoop_dev *sdev = dev_get_drvdata(dev);
+ struct scoop_dev *sdev = dev_get_drvdata(dev);
+
+ check_scoop_reg(sdev);
+ sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
+ SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
- check_scoop_reg(sdev);
- sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
- SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
- }
return 0;
}
-static int scoop_resume(struct device *dev, uint32_t level)
+static int scoop_resume(struct device *dev)
{
- if (level == RESUME_POWER_ON) {
- struct scoop_dev *sdev = dev_get_drvdata(dev);
+ struct scoop_dev *sdev = dev_get_drvdata(dev);
+
+ check_scoop_reg(sdev);
+ SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
- check_scoop_reg(sdev);
- SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
- }
return 0;
}
#else
diff --git a/arch/arm/configs/mp1000_defconfig b/arch/arm/configs/mp1000_defconfig
new file mode 100644
index 000000000000..d2cbc6fada1d
--- /dev/null
+++ b/arch/arm/configs/mp1000_defconfig
@@ -0,0 +1,897 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc1
+# Fri Sep 16 15:48:13 2005
+#
+CONFIG_ARM=y
+CONFIG_MMU=y
+CONFIG_UID16=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+
+#
+# Code maturity level options
+#
+CONFIG_EXPERIMENTAL=y
+# CONFIG_CLEAN_COMPILE is not set
+CONFIG_BROKEN=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+
+#
+# General setup
+#
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
+# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_EMBEDDED=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
+
+#
+# Loadable module support
+#
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
+
+#
+# System Type
+#
+# CONFIG_ARCH_CLPS7500 is not set
+CONFIG_ARCH_CLPS711X=y
+# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_CAMELOT is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_AAEC2000 is not set
+
+#
+# CLPS711X/EP721X Implementations
+#
+# CONFIG_ARCH_AUTCPU12 is not set
+# CONFIG_ARCH_CDB89712 is not set
+# CONFIG_ARCH_CEIVA is not set
+# CONFIG_ARCH_CLEP7312 is not set
+# CONFIG_ARCH_EDB7211 is not set
+# CONFIG_ARCH_P720T is not set
+# CONFIG_ARCH_FORTUNET is not set
+CONFIG_MACH_MP1000=y
+CONFIG_MP1000_90MHZ=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM720T=y
+CONFIG_CPU_32v4=y
+CONFIG_CPU_ABRT_LV4T=y
+CONFIG_CPU_CACHE_V4=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WT=y
+CONFIG_CPU_TLB_V4WT=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+
+#
+# Bus support
+#
+CONFIG_ISA_DMA_API=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_SMP is not set
+CONFIG_PREEMPT=y
+# CONFIG_NO_IDLE_HZ is not set
+# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyCL,38400 root=/dev/discs/disc0/part1 ip=any cs89x0_media=rj45"
+# CONFIG_XIP_KERNEL is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+# CONFIG_ARTHUR is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NETFILTER_NETLINK is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+CONFIG_MTD=y
+CONFIG_MTD_DEBUG=y
+CONFIG_MTD_DEBUG_VERBOSE=3
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=m
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
+CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
+# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=m
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+# CONFIG_MTD_CFI_I1 is not set
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=m
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+CONFIG_MTD_PHYSMAP_START=0x0000000
+CONFIG_MTD_PHYSMAP_LEN=0x4000000
+CONFIG_MTD_PHYSMAP_BANKWIDTH=2
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_EDB7312=m
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+
+#
+# NAND Flash Device Drivers
+#
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+CONFIG_MTD_NAND_MP1000=y
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+
+#
+# Parallel port support
+#
+# CONFIG_PARPORT is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=16384
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+# CONFIG_BLK_DEV_HD_IDE is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+CONFIG_IDE_ARM=y
+CONFIG_BLK_DEV_IDE_MP1000=y
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_DM=y
+# CONFIG_DM_CRYPT is not set
+# CONFIG_DM_SNAPSHOT is not set
+# CONFIG_DM_MIRROR is not set
+# CONFIG_DM_ZERO is not set
+# CONFIG_DM_MULTIPATH is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
+#
+# Ethernet (10 or 100Mbit)
+#
+CONFIG_NET_ETHERNET=y
+# CONFIG_MII is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+CONFIG_CS89x0=y
+
+#
+# Ethernet (1000 Mbit)
+#
+
+#
+# Ethernet (10000 Mbit)
+#
+
+#
+# Token Ring devices
+#
+
+#
+# Wireless LAN (non-hamradio)
+#
+# CONFIG_NET_RADIO is not set
+
+#
+# Wan interfaces
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+
+#
+# ISDN subsystem
+#
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_TSDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+CONFIG_INPUT_EVBUG=y
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_LIBPS2 is not set
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CLPS711X=y
+CONFIG_SERIAL_CLPS711X_CONSOLE=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+CONFIG_NVRAM=y
+CONFIG_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_RAW_DRIVER is not set
+
+#
+# TPM devices
+#
+
+#
+# I2C support
+#
+# CONFIG_I2C is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Misc devices
+#
+
+#
+# Multimedia Capabilities Port drivers
+#
+
+#
+# Multimedia devices
+#
+# CONFIG_VIDEO_DEV is not set
+
+#
+# Digital Video Broadcasting Devices
+#
+# CONFIG_DVB is not set
+
+#
+# Graphics support
+#
+# CONFIG_FB is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+
+#
+# Sound
+#
+# CONFIG_SOUND is not set
+
+#
+# USB support
+#
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB is not set
+
+#
+# USB Gadget Support
+#
+# CONFIG_USB_GADGET is not set
+
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+# CONFIG_EXT2_FS_POSIX_ACL is not set
+# CONFIG_EXT2_FS_SECURITY is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+# CONFIG_REISERFS_PROC_INFO is not set
+# CONFIG_REISERFS_FS_XATTR is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
+CONFIG_QUOTA=y
+# CONFIG_QFMT_V1 is not set
+# CONFIG_QFMT_V2 is not set
+CONFIG_QUOTACTL=y
+CONFIG_DNOTIFY=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_HUGETLBFS is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
+
+#
+# Miscellaneous filesystems
+#
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=m
+# CONFIG_VXFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Network File Systems
+#
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_DIRECTIO is not set
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+CONFIG_NFSD_V4=y
+CONFIG_NFSD_TCP=y
+CONFIG_ROOT_NFS=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+CONFIG_CIFS=m
+# CONFIG_CIFS_STATS is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_EXPERIMENTAL is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+
+#
+# Native Language Support
+#
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_WAITQ=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+# CONFIG_DEBUG_CLPS711X_UART2 is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+
+#
+# Cryptographic options
+#
+CONFIG_CRYPTO=y
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Hardware crypto devices
+#
+
+#
+# Library routines
+#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_DEFLATE=m
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index 1a85cfdad5ac..6055e1427ba3 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -11,6 +11,7 @@
*/
#include
#include
+#include
#include
#include
#include
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index f6de76e0a45d..baa09601a64e 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -345,7 +345,9 @@ static int bad_syscall(int n, struct pt_regs *regs)
struct thread_info *thread = current_thread_info();
siginfo_t info;
- if (current->personality != PER_LINUX && thread->exec_domain->handler) {
+ if (current->personality != PER_LINUX &&
+ current->personality != PER_LINUX_32BIT &&
+ thread->exec_domain->handler) {
thread->exec_domain->handler(n, regs);
return regs->ARM_r0;
}
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 8725d63e4219..71e5b99e519e 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -11,7 +11,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \
strnlen_user.o strchr.o strrchr.o testchangebit.o \
testclearbit.o testsetbit.o uaccess.o getuser.o \
putuser.o ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \
- ucmpdi2.o lib1funcs.o div64.o \
+ ucmpdi2.o lib1funcs.o div64.o sha1.o \
io-readsb.o io-writesb.o io-readsl.o io-writesl.o
ifeq ($(CONFIG_CPU_32v3),y)
diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S
new file mode 100644
index 000000000000..ff6ece487ffc
--- /dev/null
+++ b/arch/arm/lib/sha1.S
@@ -0,0 +1,206 @@
+/*
+ * linux/arch/arm/lib/sha1.S
+ *
+ * SHA transform optimized for ARM
+ *
+ * Copyright: (C) 2005 by Nicolas Pitre
+ * Created: September 17, 2005
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * The reference implementation for this code is linux/lib/sha1.c
+ */
+
+#include
+
+ .text
+
+
+/*
+ * void sha_transform(__u32 *digest, const char *in, __u32 *W)
+ *
+ * Note: the "in" ptr may be unaligned.
+ */
+
+ENTRY(sha_transform)
+
+ stmfd sp!, {r4 - r8, lr}
+
+ @ for (i = 0; i < 16; i++)
+ @ W[i] = be32_to_cpu(in[i]); */
+
+#ifdef __ARMEB__
+ mov r4, r0
+ mov r0, r2
+ mov r2, #64
+ bl memcpy
+ mov r2, r0
+ mov r0, r4
+#else
+ mov r3, r2
+ mov lr, #16
+1: ldrb r4, [r1], #1
+ ldrb r5, [r1], #1
+ ldrb r6, [r1], #1
+ ldrb r7, [r1], #1
+ subs lr, lr, #1
+ orr r5, r5, r4, lsl #8
+ orr r6, r6, r5, lsl #8
+ orr r7, r7, r6, lsl #8
+ str r7, [r3], #4
+ bne 1b
+#endif
+
+ @ for (i = 0; i < 64; i++)
+ @ W[i+16] = ror(W[i+13] ^ W[i+8] ^ W[i+2] ^ W[i], 31);
+
+ sub r3, r2, #4
+ mov lr, #64
+2: ldr r4, [r3, #4]!
+ subs lr, lr, #1
+ ldr r5, [r3, #8]
+ ldr r6, [r3, #32]
+ ldr r7, [r3, #52]
+ eor r4, r4, r5
+ eor r4, r4, r6
+ eor r4, r4, r7
+ mov r4, r4, ror #31
+ str r4, [r3, #64]
+ bne 2b
+
+ /*
+ * The SHA functions are:
+ *
+ * f1(B,C,D) = (D ^ (B & (C ^ D)))
+ * f2(B,C,D) = (B ^ C ^ D)
+ * f3(B,C,D) = ((B & C) | (D & (B | C)))
+ *
+ * Then the sub-blocks are processed as follows:
+ *
+ * A' = ror(A, 27) + f(B,C,D) + E + K + *W++
+ * B' = A
+ * C' = ror(B, 2)
+ * D' = C
+ * E' = D
+ *
+ * We therefore unroll each loop 5 times to avoid register shuffling.
+ * Also the ror for C (and also D and E which are successivelyderived
+ * from it) is applied in place to cut on an additional mov insn for
+ * each round.
+ */
+
+ .macro sha_f1, A, B, C, D, E
+ ldr r3, [r2], #4
+ eor ip, \C, \D
+ add \E, r1, \E, ror #2
+ and ip, \B, ip, ror #2
+ add \E, \E, \A, ror #27
+ eor ip, ip, \D, ror #2
+ add \E, \E, r3
+ add \E, \E, ip
+ .endm
+
+ .macro sha_f2, A, B, C, D, E
+ ldr r3, [r2], #4
+ add \E, r1, \E, ror #2
+ eor ip, \B, \C, ror #2
+ add \E, \E, \A, ror #27
+ eor ip, ip, \D, ror #2
+ add \E, \E, r3
+ add \E, \E, ip
+ .endm
+
+ .macro sha_f3, A, B, C, D, E
+ ldr r3, [r2], #4
+ add \E, r1, \E, ror #2
+ orr ip, \B, \C, ror #2
+ add \E, \E, \A, ror #27
+ and ip, ip, \D, ror #2
+ add \E, \E, r3
+ and r3, \B, \C, ror #2
+ orr ip, ip, r3
+ add \E, \E, ip
+ .endm
+
+ ldmia r0, {r4 - r8}
+
+ mov lr, #4
+ ldr r1, .L_sha_K + 0
+
+ /* adjust initial values */
+ mov r6, r6, ror #30
+ mov r7, r7, ror #30
+ mov r8, r8, ror #30
+
+3: subs lr, lr, #1
+ sha_f1 r4, r5, r6, r7, r8
+ sha_f1 r8, r4, r5, r6, r7
+ sha_f1 r7, r8, r4, r5, r6
+ sha_f1 r6, r7, r8, r4, r5
+ sha_f1 r5, r6, r7, r8, r4
+ bne 3b
+
+ ldr r1, .L_sha_K + 4
+ mov lr, #4
+
+4: subs lr, lr, #1
+ sha_f2 r4, r5, r6, r7, r8
+ sha_f2 r8, r4, r5, r6, r7
+ sha_f2 r7, r8, r4, r5, r6
+ sha_f2 r6, r7, r8, r4, r5
+ sha_f2 r5, r6, r7, r8, r4
+ bne 4b
+
+ ldr r1, .L_sha_K + 8
+ mov lr, #4
+
+5: subs lr, lr, #1
+ sha_f3 r4, r5, r6, r7, r8
+ sha_f3 r8, r4, r5, r6, r7
+ sha_f3 r7, r8, r4, r5, r6
+ sha_f3 r6, r7, r8, r4, r5
+ sha_f3 r5, r6, r7, r8, r4
+ bne 5b
+
+ ldr r1, .L_sha_K + 12
+ mov lr, #4
+
+6: subs lr, lr, #1
+ sha_f2 r4, r5, r6, r7, r8
+ sha_f2 r8, r4, r5, r6, r7
+ sha_f2 r7, r8, r4, r5, r6
+ sha_f2 r6, r7, r8, r4, r5
+ sha_f2 r5, r6, r7, r8, r4
+ bne 6b
+
+ ldmia r0, {r1, r2, r3, ip, lr}
+ add r4, r1, r4
+ add r5, r2, r5
+ add r6, r3, r6, ror #2
+ add r7, ip, r7, ror #2
+ add r8, lr, r8, ror #2
+ stmia r0, {r4 - r8}
+
+ ldmfd sp!, {r4 - r8, pc}
+
+.L_sha_K:
+ .word 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6
+
+
+/*
+ * void sha_init(__u32 *buf)
+ */
+
+.L_sha_initial_digest:
+ .word 0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0
+
+ENTRY(sha_init)
+
+ str lr, [sp, #-4]!
+ adr r1, .L_sha_initial_digest
+ ldmia r1, {r1, r2, r3, ip, lr}
+ stmia r0, {r1, r2, r3, ip, lr}
+ ldr pc, [sp], #4
+
diff --git a/arch/arm/mach-aaec2000/Makefile b/arch/arm/mach-aaec2000/Makefile
index 20ec83896c37..a8e462f58bc9 100644
--- a/arch/arm/mach-aaec2000/Makefile
+++ b/arch/arm/mach-aaec2000/Makefile
@@ -3,7 +3,7 @@
#
# Common support (must be linked before board specific support)
-obj-y += core.o
+obj-y += core.o clock.o
# Specific board support
obj-$(CONFIG_MACH_AAED2000) += aaed2000.o
diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c
index c9d899886648..f5ef69702296 100644
--- a/arch/arm/mach-aaec2000/aaed2000.c
+++ b/arch/arm/mach-aaec2000/aaed2000.c
@@ -27,16 +27,65 @@
#include
#include
+#include
+
#include "core.h"
+static void aaed2000_clcd_disable(struct clcd_fb *fb)
+{
+ AAED_EXT_GPIO &= ~AAED_EGPIO_LCD_PWR_EN;
+}
+
+static void aaed2000_clcd_enable(struct clcd_fb *fb)
+{
+ AAED_EXT_GPIO |= AAED_EGPIO_LCD_PWR_EN;
+}
+
+struct aaec2000_clcd_info clcd_info = {
+ .enable = aaed2000_clcd_enable,
+ .disable = aaed2000_clcd_disable,
+ .panel = {
+ .mode = {
+ .name = "Sharp",
+ .refresh = 60,
+ .xres = 640,
+ .yres = 480,
+ .pixclock = 39721,
+ .left_margin = 20,
+ .right_margin = 44,
+ .upper_margin = 21,
+ .lower_margin = 34,
+ .hsync_len = 96,
+ .vsync_len = 2,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED,
+ },
+ .width = -1,
+ .height = -1,
+ .tim2 = TIM2_IVS | TIM2_IHS,
+ .cntl = CNTL_LCDTFT,
+ .bpp = 16,
+ },
+};
+
static void __init aaed2000_init_irq(void)
{
aaec2000_init_irq();
}
+static void __init aaed2000_init(void)
+{
+ aaec2000_set_clcd_plat_data(&clcd_info);
+}
+
+static struct map_desc aaed2000_io_desc[] __initdata = {
+ { EXT_GPIO_VBASE, EXT_GPIO_PBASE, EXT_GPIO_LENGTH, MT_DEVICE }, /* Ext GPIO */
+};
+
static void __init aaed2000_map_io(void)
{
aaec2000_map_io();
+ iotable_init(aaed2000_io_desc, ARRAY_SIZE(aaed2000_io_desc));
}
MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
@@ -47,4 +96,5 @@ MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
.map_io = aaed2000_map_io,
.init_irq = aaed2000_init_irq,
.timer = &aaec2000_timer,
+ .init_machine = aaed2000_init,
MACHINE_END
diff --git a/arch/arm/mach-aaec2000/clock.c b/arch/arm/mach-aaec2000/clock.c
new file mode 100644
index 000000000000..99e019169dda
--- /dev/null
+++ b/arch/arm/mach-aaec2000/clock.c
@@ -0,0 +1,110 @@
+/*
+ * linux/arch/arm/mach-aaec2000/clock.c
+ *
+ * Copyright (C) 2005 Nicolas Bellido Y Ortega
+ *
+ * Based on linux/arch/arm/mach-integrator/clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+
+#include "clock.h"
+
+static LIST_HEAD(clocks);
+static DECLARE_MUTEX(clocks_sem);
+
+struct clk *clk_get(struct device *dev, const char *id)
+{
+ struct clk *p, *clk = ERR_PTR(-ENOENT);
+
+ down(&clocks_sem);
+ list_for_each_entry(p, &clocks, node) {
+ if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
+ clk = p;
+ break;
+ }
+ }
+ up(&clocks_sem);
+
+ return clk;
+}
+EXPORT_SYMBOL(clk_get);
+
+void clk_put(struct clk *clk)
+{
+ module_put(clk->owner);
+}
+EXPORT_SYMBOL(clk_put);
+
+int clk_enable(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+int clk_use(struct clk *clk)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_use);
+
+void clk_unuse(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_unuse);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+ return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+ return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+ return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+int clk_register(struct clk *clk)
+{
+ down(&clocks_sem);
+ list_add(&clk->node, &clocks);
+ up(&clocks_sem);
+ return 0;
+}
+EXPORT_SYMBOL(clk_register);
+
+void clk_unregister(struct clk *clk)
+{
+ down(&clocks_sem);
+ list_del(&clk->node);
+ up(&clocks_sem);
+}
+EXPORT_SYMBOL(clk_unregister);
+
+static int __init clk_init(void)
+{
+ return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-aaec2000/clock.h b/arch/arm/mach-aaec2000/clock.h
new file mode 100644
index 000000000000..d4bb74ff613f
--- /dev/null
+++ b/arch/arm/mach-aaec2000/clock.h
@@ -0,0 +1,23 @@
+/*
+ * linux/arch/arm/mach-aaec2000/clock.h
+ *
+ * Copyright (C) 2005 Nicolas Bellido Y Ortega
+ *
+ * Based on linux/arch/arm/mach-integrator/clock.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+struct module;
+
+struct clk {
+ struct list_head node;
+ unsigned long rate;
+ struct module *owner;
+ const char *name;
+ void *data;
+};
+
+int clk_register(struct clk *clk);
+void clk_unregister(struct clk *clk);
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
index aece0cd4f0a3..0c53dab80905 100644
--- a/arch/arm/mach-aaec2000/core.c
+++ b/arch/arm/mach-aaec2000/core.c
@@ -13,19 +13,27 @@
#include
#include
#include
+#include
#include
#include
+#include
#include
#include
#include
#include
#include
+#include
+#include
+#include
#include
#include
#include
+#include "core.h"
+#include "clock.h"
+
/*
* Common I/O mapping:
*
@@ -40,9 +48,17 @@
* default mapping provided here.
*/
static struct map_desc standard_io_desc[] __initdata = {
- /* virtual physical length type */
- { VIO_APB_BASE, PIO_APB_BASE, IO_APB_LENGTH, MT_DEVICE },
- { VIO_AHB_BASE, PIO_AHB_BASE, IO_AHB_LENGTH, MT_DEVICE }
+ {
+ .virtual = VIO_APB_BASE,
+ .physical = __phys_to_pfn(PIO_APB_BASE),
+ .length = IO_APB_LENGTH,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VIO_AHB_BASE,
+ .physical = __phys_to_pfn(PIO_AHB_BASE),
+ .length = IO_AHB_LENGTH,
+ .type = MT_DEVICE
+ }
};
void __init aaec2000_map_io(void)
@@ -155,3 +171,116 @@ struct sys_timer aaec2000_timer = {
.offset = aaec2000_gettimeoffset,
};
+static struct clcd_panel mach_clcd_panel;
+
+static int aaec2000_clcd_setup(struct clcd_fb *fb)
+{
+ dma_addr_t dma;
+
+ fb->panel = &mach_clcd_panel;
+
+ fb->fb.screen_base = dma_alloc_writecombine(&fb->dev->dev, SZ_1M,
+ &dma, GFP_KERNEL);
+
+ if (!fb->fb.screen_base) {
+ printk(KERN_ERR "CLCD: unable to map framebuffer\n");
+ return -ENOMEM;
+ }
+
+ fb->fb.fix.smem_start = dma;
+ fb->fb.fix.smem_len = SZ_1M;
+
+ return 0;
+}
+
+static int aaec2000_clcd_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+ return dma_mmap_writecombine(&fb->dev->dev, vma,
+ fb->fb.screen_base,
+ fb->fb.fix.smem_start,
+ fb->fb.fix.smem_len);
+}
+
+static void aaec2000_clcd_remove(struct clcd_fb *fb)
+{
+ dma_free_writecombine(&fb->dev->dev, fb->fb.fix.smem_len,
+ fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+static struct clcd_board clcd_plat_data = {
+ .name = "AAEC-2000",
+ .check = clcdfb_check,
+ .decode = clcdfb_decode,
+ .setup = aaec2000_clcd_setup,
+ .mmap = aaec2000_clcd_mmap,
+ .remove = aaec2000_clcd_remove,
+};
+
+static struct amba_device clcd_device = {
+ .dev = {
+ .bus_id = "mb:16",
+ .coherent_dma_mask = ~0,
+ .platform_data = &clcd_plat_data,
+ },
+ .res = {
+ .start = AAEC_CLCD_PHYS,
+ .end = AAEC_CLCD_PHYS + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ .irq = { INT_LCD, NO_IRQ },
+ .periphid = 0x41110,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+ &clcd_device,
+};
+
+static struct clk aaec2000_clcd_clk = {
+ .name = "CLCDCLK",
+};
+
+void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *clcd)
+{
+ clcd_plat_data.enable = clcd->enable;
+ clcd_plat_data.disable = clcd->disable;
+ memcpy(&mach_clcd_panel, &clcd->panel, sizeof(struct clcd_panel));
+}
+
+static struct flash_platform_data aaec2000_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 4,
+};
+
+static struct resource aaec2000_flash_resource = {
+ .start = AAEC_FLASH_BASE,
+ .end = AAEC_FLASH_BASE + AAEC_FLASH_SIZE,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device aaec2000_flash_device = {
+ .name = "armflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &aaec2000_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &aaec2000_flash_resource,
+};
+
+static int __init aaec2000_init(void)
+{
+ int i;
+
+ clk_register(&aaec2000_clcd_clk);
+
+ for (i = 0; i < ARRAY_SIZE(amba_devs); i++) {
+ struct amba_device *d = amba_devs[i];
+ amba_device_register(d, &iomem_resource);
+ }
+
+ platform_device_register(&aaec2000_flash_device);
+
+ return 0;
+};
+arch_initcall(aaec2000_init);
+
diff --git a/arch/arm/mach-aaec2000/core.h b/arch/arm/mach-aaec2000/core.h
index 91893d848c16..daefc0ea14a1 100644
--- a/arch/arm/mach-aaec2000/core.h
+++ b/arch/arm/mach-aaec2000/core.h
@@ -9,8 +9,19 @@
*
*/
+#include
+
struct sys_timer;
extern struct sys_timer aaec2000_timer;
extern void __init aaec2000_map_io(void);
extern void __init aaec2000_init_irq(void);
+
+struct aaec2000_clcd_info {
+ struct clcd_panel panel;
+ void (*disable)(struct clcd_fb *);
+ void (*enable)(struct clcd_fb *);
+};
+
+extern void __init aaec2000_set_clcd_plat_data(struct aaec2000_clcd_info *);
+
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index 0793dcf54f2e..d5c155045762 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -69,6 +69,17 @@ config EP72XX_ROM_BOOT
You almost surely want to say N here.
+config MACH_MP1000
+ bool "MACH_MP1000"
+ help
+ Say Y if you intend to run the kernel on the Comdial MP1000 platform.
+
+config MP1000_90MHZ
+ bool "MP1000_90MHZ"
+ depends on MACH_MP1000
+ help
+ Say Y if you have the MP1000 configured to be set at 90MHZ rather than 74MHZ
+
endmenu
endif
diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile
index 4a197315f0cf..8a6dc1ccf8fe 100644
--- a/arch/arm/mach-clps711x/Makefile
+++ b/arch/arm/mach-clps711x/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o
obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o
obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o
obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o
+obj-$(CONFIG_MACH_MP1000) += mp1000-mach.o mp1000-mm.o mp1000-seprom.o
obj-$(CONFIG_ARCH_P720T) += p720t.o
leds-$(CONFIG_ARCH_P720T) += p720t-leds.o
obj-$(CONFIG_LEDS) += $(leds-y)
diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c
index dc73feb1ffb0..43b9423d1440 100644
--- a/arch/arm/mach-clps711x/autcpu12.c
+++ b/arch/arm/mach-clps711x/autcpu12.c
@@ -46,10 +46,14 @@
*/
static struct map_desc autcpu12_io_desc[] __initdata = {
- /* virtual, physical, length, type */
- /* memory-mapped extra io and CS8900A Ethernet chip */
- /* ethernet chip */
- { AUTCPU12_VIRT_CS8900A, AUTCPU12_PHYS_CS8900A, SZ_1M, MT_DEVICE }
+ /* memory-mapped extra io and CS8900A Ethernet chip */
+ /* ethernet chip */
+ {
+ .virtual = AUTCPU12_VIRT_CS8900A,
+ .pfn = __phys_to_pfn(AUTCPU12_PHYS_CS8900A),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }
};
void __init autcpu12_map_io(void)
diff --git a/arch/arm/mach-clps711x/cdb89712.c b/arch/arm/mach-clps711x/cdb89712.c
index a46c82cd2711..cba7be5a06c3 100644
--- a/arch/arm/mach-clps711x/cdb89712.c
+++ b/arch/arm/mach-clps711x/cdb89712.c
@@ -39,7 +39,12 @@
* ethernet driver, perhaps.
*/
static struct map_desc cdb89712_io_desc[] __initdata = {
- { ETHER_BASE, ETHER_START, ETHER_SIZE, MT_DEVICE }
+ {
+ .virtual = ETHER_BASE,
+ .pfn =__phys_to_pfn(ETHER_START),
+ .length = ETHER_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init cdb89712_map_io(void)
diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c
index 780d91805984..35d51a759b59 100644
--- a/arch/arm/mach-clps711x/ceiva.c
+++ b/arch/arm/mach-clps711x/ceiva.c
@@ -37,11 +37,13 @@
#include "common.h"
static struct map_desc ceiva_io_desc[] __initdata = {
- /* virtual, physical, length, type */
-
- /* SED1355 controlled video RAM & registers */
- { CEIVA_VIRT_SED1355, CEIVA_PHYS_SED1355, SZ_2M, MT_DEVICE }
-
+ /* SED1355 controlled video RAM & registers */
+ {
+ .virtual = CEIVA_VIRT_SED1355,
+ .pfn = __phys_to_pfn(CEIVA_PHYS_SED1355),
+ .length = SZ_2M,
+ .type = MT_DEVICE
+ }
};
diff --git a/arch/arm/mach-clps711x/edb7211-mm.c b/arch/arm/mach-clps711x/edb7211-mm.c
index 7fd7b01822d0..72f8bb05d55e 100644
--- a/arch/arm/mach-clps711x/edb7211-mm.c
+++ b/arch/arm/mach-clps711x/edb7211-mm.c
@@ -51,15 +51,27 @@ extern void clps711x_map_io(void);
* happens).
*/
static struct map_desc edb7211_io_desc[] __initdata = {
- /* virtual, physical, length, type */
-
- /* memory-mapped extra keyboard row and CS8900A Ethernet chip */
- { EP7211_VIRT_EXTKBD, EP7211_PHYS_EXTKBD, SZ_1M, MT_DEVICE },
- { EP7211_VIRT_CS8900A, EP7211_PHYS_CS8900A, SZ_1M, MT_DEVICE },
-
- /* flash banks */
- { EP7211_VIRT_FLASH1, EP7211_PHYS_FLASH1, SZ_8M, MT_DEVICE },
- { EP7211_VIRT_FLASH2, EP7211_PHYS_FLASH2, SZ_8M, MT_DEVICE }
+ { /* memory-mapped extra keyboard row */
+ .virtual = EP7211_VIRT_EXTKBD,
+ .pfn = __phys_to_pfn(EP7211_PHYS_EXTKBD),
+ .length = SZ_1M,
+ .type - MT_DEVICE
+ }, { /* and CS8900A Ethernet chip */
+ .virtual = EP7211_VIRT_CS8900A,
+ .pfn = __phys_to_pfn(EP7211_PHYS_CS8900A),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }, { /* flash banks */
+ .virtual = EP7211_VIRT_FLASH1,
+ .pfn = __phys_to_pfn(EP7211_PHYS_FLASH1),
+ .length = SZ_8M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = EP7211_VIRT_FLASH2,
+ .pfn = __phys_to_pfn(EP7211_PHYS_FLASH2),
+ .length = SZ_8M,
+ .type = MT_DEVICE
+ }
};
void __init edb7211_map_io(void)
diff --git a/arch/arm/mach-clps711x/mm.c b/arch/arm/mach-clps711x/mm.c
index 120b7cac84b5..a00f77ef8df8 100644
--- a/arch/arm/mach-clps711x/mm.c
+++ b/arch/arm/mach-clps711x/mm.c
@@ -24,6 +24,7 @@
#include
#include
+#include
#include
#include
#include
@@ -34,7 +35,12 @@
* This maps the generic CLPS711x registers
*/
static struct map_desc clps711x_io_desc[] __initdata = {
- { CLPS7111_VIRT_BASE, CLPS7111_PHYS_BASE, 1048576, MT_DEVICE }
+ {
+ .virtual = CLPS7111_VIRT_BASE,
+ .pfn = __phys_to_pfn(CLPS7111_PHYS_BASE),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }
};
void __init clps711x_map_io(void)
diff --git a/arch/arm/mach-clps711x/mp1000-mach.c b/arch/arm/mach-clps711x/mp1000-mach.c
new file mode 100644
index 000000000000..c2816bcde5e7
--- /dev/null
+++ b/arch/arm/mach-clps711x/mp1000-mach.c
@@ -0,0 +1,49 @@
+/*
+ * linux/arch/arm/mach-mp1000/mp1000.c
+ *
+ * Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include
+#include
+#include
+
+#include
+#include
+#include
+#include
+
+#include "common.h"
+
+extern void mp1000_map_io(void);
+
+static void __init mp1000_init(void)
+{
+ seprom_init();
+}
+
+MACHINE_START(MP1000, "Comdial MP1000")
+ /* Maintainer: Jon Ringle */
+ .phys_ram = 0xc0000000,
+ .phys_io = 0x80000000,
+ .io_pg_offst = ((0xff000000) >> 18) & 0xfffc,
+ .boot_params = 0xc0015100,
+ .map_io = mp1000_map_io,
+ .init_irq = clps711x_init_irq,
+ .init_machine = mp1000_init,
+ .timer = &clps711x_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-clps711x/mp1000-mm.c b/arch/arm/mach-clps711x/mp1000-mm.c
new file mode 100644
index 000000000000..20e810b0ec0c
--- /dev/null
+++ b/arch/arm/mach-clps711x/mp1000-mm.c
@@ -0,0 +1,47 @@
+/*
+ * linux/arch/arm/mach-mp1000/mm.c
+ *
+ * Extra MM routines for the MP1000
+ *
+ * Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include
+#include
+
+#include
+#include
+#include
+#include
+
+#include
+
+extern void clps711x_map_io(void);
+
+static struct map_desc mp1000_io_desc[] __initdata = {
+ { MP1000_EIO_BASE, MP1000_EIO_START, MP1000_EIO_SIZE, MT_DEVICE },
+ { MP1000_FIO_BASE, MP1000_FIO_START, MP1000_FIO_SIZE, MT_DEVICE },
+ { MP1000_LIO_BASE, MP1000_LIO_START, MP1000_LIO_SIZE, MT_DEVICE },
+ { MP1000_NIO_BASE, MP1000_NIO_START, MP1000_NIO_SIZE, MT_DEVICE },
+ { MP1000_IDE_BASE, MP1000_IDE_START, MP1000_IDE_SIZE, MT_DEVICE },
+ { MP1000_DSP_BASE, MP1000_DSP_START, MP1000_DSP_SIZE, MT_DEVICE }
+};
+
+void __init mp1000_map_io(void)
+{
+ clps711x_map_io();
+ iotable_init(mp1000_io_desc, ARRAY_SIZE(mp1000_io_desc));
+}
diff --git a/arch/arm/mach-clps711x/mp1000-seprom.c b/arch/arm/mach-clps711x/mp1000-seprom.c
new file mode 100644
index 000000000000..b22d0bebb851
--- /dev/null
+++ b/arch/arm/mach-clps711x/mp1000-seprom.c
@@ -0,0 +1,195 @@
+/*`
+ * mp1000-seprom.c
+ *
+ * This file contains the Serial EEPROM code for the MP1000 board
+ *
+ * Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include
+#include
+#include
+#include
+#include
+
+/* If SepromInit() can initialize and checksum the seprom successfully, */
+/* then it will point seprom_data_ptr at the shadow copy. */
+
+static eeprom_struct seprom_data; /* shadow copy of seprom content */
+
+eeprom_struct *seprom_data_ptr = 0; /* 0 => not initialized */
+
+/*
+ * Port D Bit 5 is Chip Select for EEPROM
+ * Port E Bit 0 is Input, Data out from EEPROM
+ * Port E Bit 1 is Output, Data in to EEPROM
+ * Port E Bit 2 is Output, CLK to EEPROM
+ */
+
+static char *port_d_ptr = (char *)(CLPS7111_VIRT_BASE + PDDR);
+static char *port_e_ptr = (char *)(CLPS7111_VIRT_BASE + PEDR);
+
+#define NO_OF_SHORTS 64 // Device is 64 x 16 bits
+#define ENABLE_RW 0
+#define DISABLE_RW 1
+
+static inline void toggle_seprom_clock(void)
+{
+ *port_e_ptr |= HwPortESepromCLK;
+ *port_e_ptr &= ~(HwPortESepromCLK);
+}
+
+static inline void select_eeprom(void)
+{
+ *port_d_ptr |= HwPortDEECS;
+ *port_e_ptr &= ~(HwPortESepromCLK);
+}
+
+static inline void deselect_eeprom(void)
+{
+ *port_d_ptr &= ~(HwPortDEECS);
+ *port_e_ptr &= ~(HwPortESepromDIn);
+}
+
+/*
+ * GetSepromDataPtr - returns pointer to shadow (RAM) copy of seprom
+ * and returns 0 if seprom is not initialized or
+ * has a checksum error.
+ */
+
+eeprom_struct* get_seprom_ptr(void)
+{
+ return seprom_data_ptr;
+}
+
+unsigned char* get_eeprom_mac_address(void)
+{
+ return seprom_data_ptr->variant.eprom_struct.mac_Address;
+}
+
+/*
+ * ReadSProm, Physically reads data from the Serial PROM
+ */
+static void read_sprom(short address, int length, eeprom_struct *buffer)
+{
+ short data = COMMAND_READ | (address & 0x3F);
+ short bit;
+ int i;
+
+ select_eeprom();
+
+ // Clock in 9 bits of the command
+ for (i = 0, bit = 0x100; i < 9; i++, bit >>= 1) {
+ if (data & bit)
+ *port_e_ptr |= HwPortESepromDIn;
+ else
+ *port_e_ptr &= ~(HwPortESepromDIn);
+
+ toggle_seprom_clock();
+ }
+
+ //
+ // Now read one or more shorts of data from the Seprom
+ //
+ while (length-- > 0) {
+ data = 0;
+
+ // Read 16 bits at a time
+ for (i = 0; i < 16; i++) {
+ data <<= 1;
+ toggle_seprom_clock();
+ data |= *port_e_ptr & HwPortESepromDOut;
+
+ }
+
+ buffer->variant.eprom_short_data[address++] = data;
+ }
+
+ deselect_eeprom();
+
+ return;
+}
+
+
+
+/*
+ * ReadSerialPROM
+ *
+ * Input: Pointer to array of 64 x 16 Bits
+ *
+ * Output: if no problem reading data is filled in
+ */
+static void read_serial_prom(eeprom_struct *data)
+{
+ read_sprom(0, 64, data);
+}
+
+
+//
+// Compute Serial EEPROM checksum
+//
+// Input: Pointer to struct with Eprom data
+//
+// Output: The computed Eprom checksum
+//
+static short compute_seprom_checksum(eeprom_struct *data)
+{
+ short checksum = 0;
+ int i;
+
+ for (i = 0; i < 126; i++) {
+ checksum += (short)data->variant.eprom_byte_data[i];
+ }
+
+ return((short)(0x5555 - (checksum & 0xFFFF)));
+}
+
+//
+// Make sure the data port bits for the SEPROM are correctly initialised
+//
+
+void __init seprom_init(void)
+{
+ short checksum;
+
+ // Init Port D
+ *(char *)(CLPS7111_VIRT_BASE + PDDDR) = 0x0;
+ *(char *)(CLPS7111_VIRT_BASE + PDDR) = 0x15;
+
+ // Init Port E
+ *(int *)(CLPS7111_VIRT_BASE + PEDDR) = 0x06;
+ *(int *)(CLPS7111_VIRT_BASE + PEDR) = 0x04;
+
+ //
+ // Make sure that EEPROM struct size never exceeds 128 bytes
+ //
+ if (sizeof(eeprom_struct) > 128) {
+ panic("Serial PROM struct size > 128, aborting read\n");
+ }
+
+ read_serial_prom(&seprom_data);
+
+ checksum = compute_seprom_checksum(&seprom_data);
+
+ if (checksum != seprom_data.variant.eprom_short_data[63]) {
+ panic("Serial EEPROM checksum failed\n");
+ }
+
+ seprom_data_ptr = &seprom_data;
+}
+
diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c
index 5bdb90edf992..a1acb945fb51 100644
--- a/arch/arm/mach-clps711x/p720t.c
+++ b/arch/arm/mach-clps711x/p720t.c
@@ -29,6 +29,7 @@
#include
#include
#include
+#include
#include
#include
#include
@@ -42,8 +43,17 @@
* We map both here.
*/
static struct map_desc p720t_io_desc[] __initdata = {
- { SYSPLD_VIRT_BASE, SYSPLD_PHYS_BASE, 1048576, MT_DEVICE },
- { 0xfe400000, 0x10400000, 1048576, MT_DEVICE }
+ {
+ .virtual = SYSPLD_VIRT_BASE,
+ .pfn = __phys_to_pfn(SYSPLD_PHYS_BASE),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = 0xfe400000,
+ .pfn = __phys_to_pfn(0x10400000),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }
};
static void __init
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index e216ab8b9e8f..0364ba4b539e 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -259,10 +259,27 @@ static void __init clps7500_init_irq(void)
}
static struct map_desc cl7500_io_desc[] __initdata = {
- { IO_BASE, IO_START, IO_SIZE, MT_DEVICE }, /* IO space */
- { ISA_BASE, ISA_START, ISA_SIZE, MT_DEVICE }, /* ISA space */
- { FLASH_BASE, FLASH_START, FLASH_SIZE, MT_DEVICE }, /* Flash */
- { LED_BASE, LED_START, LED_SIZE, MT_DEVICE } /* LED */
+ { /* IO space */
+ .virtual = IO_BASE,
+ .pfn = __phys_to_pfn(IO_START),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ }, { /* ISA space */
+ .virtual = ISA_BASE,
+ .pfn = __phys_to_pfn(ISA_START),
+ .length = ISA_SIZE,
+ .type = MT_DEVICE
+ }, { /* Flash */
+ .virtual = FLASH_BASE,
+ .pfn = __phys_to_pfn(FLASH_START),
+ .length = FLASH_SIZE,
+ .type = MT_DEVICE
+ }, { /* LED */
+ .virtual = LED_BASE,
+ .pfn = __phys_to_pfn(LED_START),
+ .length = LED_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init clps7500_map_io(void)
diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c
index 5aeadfd72143..15261646dcdd 100644
--- a/arch/arm/mach-ebsa110/core.c
+++ b/arch/arm/mach-ebsa110/core.c
@@ -76,16 +76,42 @@ static struct map_desc ebsa110_io_desc[] __initdata = {
/*
* sparse external-decode ISAIO space
*/
- { IRQ_STAT, TRICK4_PHYS, PGDIR_SIZE, MT_DEVICE }, /* IRQ_STAT/IRQ_MCLR */
- { IRQ_MASK, TRICK3_PHYS, PGDIR_SIZE, MT_DEVICE }, /* IRQ_MASK/IRQ_MSET */
- { SOFT_BASE, TRICK1_PHYS, PGDIR_SIZE, MT_DEVICE }, /* SOFT_BASE */
- { PIT_BASE, TRICK0_PHYS, PGDIR_SIZE, MT_DEVICE }, /* PIT_BASE */
+ { /* IRQ_STAT/IRQ_MCLR */
+ .virtual = IRQ_STAT,
+ .pfn = __phys_to_pfn(TRICK4_PHYS),
+ .length = PGDIR_SIZE,
+ .type = MT_DEVICE
+ }, { /* IRQ_MASK/IRQ_MSET */
+ .virtual = IRQ_MASK,
+ .pfn = __phys_to_pfn(TRICK3_PHYS),
+ .length = PGDIR_SIZE,
+ .type = MT_DEVICE
+ }, { /* SOFT_BASE */
+ .virtual = SOFT_BASE,
+ .pfn = __phys_to_pfn(TRICK1_PHYS),
+ .length = PGDIR_SIZE,
+ .type = MT_DEVICE
+ }, { /* PIT_BASE */
+ .virtual = PIT_BASE,
+ .pfn = __phys_to_pfn(TRICK0_PHYS),
+ .length = PGDIR_SIZE,
+ .type = MT_DEVICE
+ },
/*
* self-decode ISAIO space
*/
- { ISAIO_BASE, ISAIO_PHYS, ISAIO_SIZE, MT_DEVICE },
- { ISAMEM_BASE, ISAMEM_PHYS, ISAMEM_SIZE, MT_DEVICE }
+ {
+ .virtual = ISAIO_BASE,
+ .pfn = __phys_to_pfn(ISAIO_PHYS),
+ .length = ISAIO_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = ISAMEM_BASE,
+ .pfn = __phys_to_pfn(ISAMEM_PHYS),
+ .length = ISAMEM_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init ebsa110_map_io(void)
diff --git a/arch/arm/mach-ebsa110/io.c b/arch/arm/mach-ebsa110/io.c
index ef7eb5dc91bd..c648bfb676a1 100644
--- a/arch/arm/mach-ebsa110/io.c
+++ b/arch/arm/mach-ebsa110/io.c
@@ -24,6 +24,7 @@
#include
#include
+#include
#include
#include
diff --git a/arch/arm/mach-epxa10db/mm.c b/arch/arm/mach-epxa10db/mm.c
index 2aa57fa46da3..e8832d0910ee 100644
--- a/arch/arm/mach-epxa10db/mm.c
+++ b/arch/arm/mach-epxa10db/mm.c
@@ -31,12 +31,37 @@
/* Page table mapping for I/O region */
static struct map_desc epxa10db_io_desc[] __initdata = {
- { IO_ADDRESS(EXC_REGISTERS_BASE), EXC_REGISTERS_BASE, SZ_16K, MT_DEVICE },
- { IO_ADDRESS(EXC_PLD_BLOCK0_BASE), EXC_PLD_BLOCK0_BASE, SZ_16K, MT_DEVICE },
- { IO_ADDRESS(EXC_PLD_BLOCK1_BASE), EXC_PLD_BLOCK1_BASE, SZ_16K, MT_DEVICE },
- { IO_ADDRESS(EXC_PLD_BLOCK2_BASE), EXC_PLD_BLOCK2_BASE, SZ_16K, MT_DEVICE },
- { IO_ADDRESS(EXC_PLD_BLOCK3_BASE), EXC_PLD_BLOCK3_BASE, SZ_16K, MT_DEVICE },
- { FLASH_VADDR(EXC_EBI_BLOCK0_BASE), EXC_EBI_BLOCK0_BASE, SZ_16M, MT_DEVICE }
+ {
+ .virtual = IO_ADDRESS(EXC_REGISTERS_BASE),
+ .pfn = __phys_to_pfn(EXC_REGISTERS_BASE),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(EXC_PLD_BLOCK0_BASE),
+ .pfn = __phys_to_pfn(EXC_PLD_BLOCK0_BASE),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(EXC_PLD_BLOCK1_BASE),
+ .pfn =__phys_to_pfn(EXC_PLD_BLOCK1_BASE),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(EXC_PLD_BLOCK2_BASE),
+ .physical = __phys_to_pfn(EXC_PLD_BLOCK2_BASE),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(EXC_PLD_BLOCK3_BASE),
+ .pfn = __phys_to_pfn(EXC_PLD_BLOCK3_BASE),
+ .length = SZ_16K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = FLASH_VADDR(EXC_EBI_BLOCK0_BASE),
+ .pfn = __phys_to_pfn(EXC_EBI_BLOCK0_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }
};
void __init epxa10db_map_io(void)
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index eb8238c1ef06..dc09fd200c16 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -130,8 +130,17 @@ void __init footbridge_init_irq(void)
* it means that we have extra bullet protection on our feet.
*/
static struct map_desc fb_common_io_desc[] __initdata = {
- { ARMCSR_BASE, DC21285_ARMCSR_BASE, ARMCSR_SIZE, MT_DEVICE },
- { XBUS_BASE, 0x40000000, XBUS_SIZE, MT_DEVICE }
+ {
+ .virtual = ARMCSR_BASE,
+ .pfn = DC21285_ARMCSR_BASE,
+ .length = ARMCSR_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = XBUS_BASE,
+ .pfn = __phys_to_pfn(0x40000000),
+ .length = XBUS_SIZE,
+ .type = MT_DEVICE
+ }
};
/*
@@ -140,11 +149,32 @@ static struct map_desc fb_common_io_desc[] __initdata = {
*/
static struct map_desc ebsa285_host_io_desc[] __initdata = {
#if defined(CONFIG_ARCH_FOOTBRIDGE) && defined(CONFIG_FOOTBRIDGE_HOST)
- { PCIMEM_BASE, DC21285_PCI_MEM, PCIMEM_SIZE, MT_DEVICE },
- { PCICFG0_BASE, DC21285_PCI_TYPE_0_CONFIG, PCICFG0_SIZE, MT_DEVICE },
- { PCICFG1_BASE, DC21285_PCI_TYPE_1_CONFIG, PCICFG1_SIZE, MT_DEVICE },
- { PCIIACK_BASE, DC21285_PCI_IACK, PCIIACK_SIZE, MT_DEVICE },
- { PCIO_BASE, DC21285_PCI_IO, PCIO_SIZE, MT_DEVICE }
+ {
+ .virtual = PCIMEM_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_MEM),
+ .length = PCIMEM_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCICFG0_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_TYPE_0_CONFIG),
+ .length = PCICFG0_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCICFG1_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_TYPE_1_CONFIG),
+ .length = PCICFG1_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCIIACK_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_IACK),
+ .length = PCIIACK_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCIO_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_IO),
+ .length = PCIO_SIZE,
+ .type = MT_DEVICE
+ }
#endif
};
@@ -153,8 +183,17 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = {
*/
static struct map_desc co285_io_desc[] __initdata = {
#ifdef CONFIG_ARCH_CO285
- { PCIO_BASE, DC21285_PCI_IO, PCIO_SIZE, MT_DEVICE },
- { PCIMEM_BASE, DC21285_PCI_MEM, PCIMEM_SIZE, MT_DEVICE }
+ {
+ .virtual = PCIO_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_IO),
+ .length = PCIO_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCIMEM_BASE,
+ .pfn = __phys_to_pfn(DC21285_PCI_MEM),
+ .length = PCIMEM_SIZE,
+ .type = MT_DEVICE
+ }
#endif
};
diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c
index 5110e2e65ddd..c096b4569308 100644
--- a/arch/arm/mach-h720x/common.c
+++ b/arch/arm/mach-h720x/common.c
@@ -237,7 +237,12 @@ void __init h720x_init_irq (void)
}
static struct map_desc h720x_io_desc[] __initdata = {
- { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE },
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ },
};
/* Initialize io tables */
diff --git a/arch/arm/mach-imx/generic.c b/arch/arm/mach-imx/generic.c
index f8a742bb2d5b..cb14b0682cef 100644
--- a/arch/arm/mach-imx/generic.c
+++ b/arch/arm/mach-imx/generic.c
@@ -273,8 +273,12 @@ static struct platform_device *devices[] __initdata = {
};
static struct map_desc imx_io_desc[] __initdata = {
- /* virtual physical length type */
- {IMX_IO_BASE, IMX_IO_PHYS, IMX_IO_SIZE, MT_DEVICE},
+ {
+ .virtual = IMX_IO_BASE,
+ .pfn = __phys_to_pfn(IMX_IO_PHYS),
+ .length = IMX_IO_SIZE,
+ .type = MT_DEVICE
+ }
};
void __init
diff --git a/arch/arm/mach-imx/mx1ads.c b/arch/arm/mach-imx/mx1ads.c
index a7511ddfe364..4cbdc1fe04b1 100644
--- a/arch/arm/mach-imx/mx1ads.c
+++ b/arch/arm/mach-imx/mx1ads.c
@@ -61,13 +61,37 @@ mx1ads_init(void)
}
static struct map_desc mx1ads_io_desc[] __initdata = {
- /* virtual physical length type */
- {IMX_CS0_VIRT, IMX_CS0_PHYS, IMX_CS0_SIZE, MT_DEVICE},
- {IMX_CS1_VIRT, IMX_CS1_PHYS, IMX_CS1_SIZE, MT_DEVICE},
- {IMX_CS2_VIRT, IMX_CS2_PHYS, IMX_CS2_SIZE, MT_DEVICE},
- {IMX_CS3_VIRT, IMX_CS3_PHYS, IMX_CS3_SIZE, MT_DEVICE},
- {IMX_CS4_VIRT, IMX_CS4_PHYS, IMX_CS4_SIZE, MT_DEVICE},
- {IMX_CS5_VIRT, IMX_CS5_PHYS, IMX_CS5_SIZE, MT_DEVICE},
+ {
+ .virtual = IMX_CS0_VIRT,
+ .pfn = __phys_to_pfn(IMX_CS0_PHYS),
+ .length = IMX_CS0_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IMX_CS1_VIRT,
+ .pfn = __phys_to_pfn(IMX_CS1_PHYS),
+ .length = IMX_CS1_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IMX_CS2_VIRT,
+ .pfn = __phys_to_pfn(IMX_CS2_PHYS),
+ .length = IMX_CS2_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IMX_CS3_VIRT,
+ .pfn = __phys_to_pfn(IMX_CS3_PHYS),
+ .length = IMX_CS3_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IMX_CS4_VIRT,
+ .pfn = __phys_to_pfn(IMX_CS4_PHYS),
+ .length = IMX_CS4_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IMX_CS5_VIRT,
+ .pfn = __phys_to_pfn(IMX_CS5_PHYS),
+ .length = IMX_CS5_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 36e2b6eb67b7..f368b85f0447 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -75,19 +75,72 @@
*/
static struct map_desc ap_io_desc[] __initdata = {
- { IO_ADDRESS(INTEGRATOR_HDR_BASE), INTEGRATOR_HDR_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_SC_BASE), INTEGRATOR_SC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_EBI_BASE), INTEGRATOR_EBI_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_CT_BASE), INTEGRATOR_CT_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_IC_BASE), INTEGRATOR_IC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART0_BASE), INTEGRATOR_UART0_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_DBG_BASE), INTEGRATOR_DBG_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_GPIO_BASE), INTEGRATOR_GPIO_BASE, SZ_4K, MT_DEVICE },
- { PCI_MEMORY_VADDR, PHYS_PCI_MEM_BASE, SZ_16M, MT_DEVICE },
- { PCI_CONFIG_VADDR, PHYS_PCI_CONFIG_BASE, SZ_16M, MT_DEVICE },
- { PCI_V3_VADDR, PHYS_PCI_V3_BASE, SZ_64K, MT_DEVICE },
- { PCI_IO_VADDR, PHYS_PCI_IO_BASE, SZ_64K, MT_DEVICE }
+ {
+ .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_IC_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_IC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_UART0_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_UART0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_GPIO_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCI_MEMORY_VADDR,
+ .pfn = __phys_to_pfn(PHYS_PCI_MEM_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCI_CONFIG_VADDR,
+ .pfn = __phys_to_pfn(PHYS_PCI_CONFIG_BASE),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCI_V3_VADDR,
+ .pfn = __phys_to_pfn(PHYS_PCI_V3_BASE),
+ .length = SZ_64K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = PCI_IO_VADDR,
+ .pfn = __phys_to_pfn(PHYS_PCI_IO_BASE),
+ .length = SZ_64K,
+ .type = MT_DEVICE
+ }
};
static void __init ap_map_io(void)
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 2be5c03ab87f..aa34c58b96c4 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -74,17 +74,62 @@
*/
static struct map_desc intcp_io_desc[] __initdata = {
- { IO_ADDRESS(INTEGRATOR_HDR_BASE), INTEGRATOR_HDR_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_SC_BASE), INTEGRATOR_SC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_EBI_BASE), INTEGRATOR_EBI_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_CT_BASE), INTEGRATOR_CT_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_IC_BASE), INTEGRATOR_IC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART0_BASE), INTEGRATOR_UART0_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_DBG_BASE), INTEGRATOR_DBG_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(INTEGRATOR_GPIO_BASE), INTEGRATOR_GPIO_BASE, SZ_4K, MT_DEVICE },
- { 0xfca00000, 0xca000000, SZ_4K, MT_DEVICE },
- { 0xfcb00000, 0xcb000000, SZ_4K, MT_DEVICE },
+ {
+ .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_SC_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_SC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_IC_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_IC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_UART0_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_UART0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_UART1_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_UART1_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_DBG_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_DBG_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(INTEGRATOR_GPIO_BASE),
+ .pfn = __phys_to_pfn(INTEGRATOR_GPIO_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = 0xfca00000,
+ .pfn = __phys_to_pfn(0xca000000),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = 0xfcb00000,
+ .pfn = __phys_to_pfn(0xcb000000),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }
};
static void __init intcp_map_io(void)
diff --git a/arch/arm/mach-iop3xx/iop321-setup.c b/arch/arm/mach-iop3xx/iop321-setup.c
index 0f921ba2750c..bb5091223b63 100644
--- a/arch/arm/mach-iop3xx/iop321-setup.c
+++ b/arch/arm/mach-iop3xx/iop321-setup.c
@@ -38,13 +38,17 @@
* Standard IO mapping for all IOP321 based systems
*/
static struct map_desc iop321_std_desc[] __initdata = {
- /* virtual physical length type */
-
- /* mem mapped registers */
- { IOP321_VIRT_MEM_BASE, IOP321_PHYS_MEM_BASE, 0x00002000, MT_DEVICE },
-
- /* PCI IO space */
- { IOP321_PCI_LOWER_IO_VA, IOP321_PCI_LOWER_IO_PA, IOP321_PCI_IO_WINDOW_SIZE, MT_DEVICE }
+ { /* mem mapped registers */
+ .virtual = IOP321_VIRT_MEM_BASE,
+ .pfn = __phys_to_pfn(IOP321_PHYS_MEM_BASE),
+ .length = 0x00002000,
+ .type = MT_DEVICE
+ }, { /* PCI IO space */
+ .virtual = IOP321_PCI_LOWER_IO_VA,
+ .pfn = __phys_to_pfn(IOP321_PCI_LOWER_IO_PA),
+ .length = IOP321_PCI_IO_WINDOW_SIZE,
+ .type = MT_DEVICE
+ }
};
#ifdef CONFIG_ARCH_IQ80321
diff --git a/arch/arm/mach-iop3xx/iop331-setup.c b/arch/arm/mach-iop3xx/iop331-setup.c
index fc74b722f72f..a2533c3ab42f 100644
--- a/arch/arm/mach-iop3xx/iop331-setup.c
+++ b/arch/arm/mach-iop3xx/iop331-setup.c
@@ -37,13 +37,17 @@
* Standard IO mapping for all IOP331 based systems
*/
static struct map_desc iop331_std_desc[] __initdata = {
- /* virtual physical length type */
-
- /* mem mapped registers */
- { IOP331_VIRT_MEM_BASE, IOP331_PHYS_MEM_BASE, 0x00002000, MT_DEVICE },
-
- /* PCI IO space */
- { IOP331_PCI_LOWER_IO_VA, IOP331_PCI_LOWER_IO_PA, IOP331_PCI_IO_WINDOW_SIZE, MT_DEVICE }
+ { /* mem mapped registers */
+ .virtual = IOP331_VIRT_MEM_BASE,
+ .pfn = __phys_to_pfn(IOP331_PHYS_MEM_BASE),
+ .length = 0x00002000,
+ .type = MT_DEVICE
+ }, { /* PCI IO space */
+ .virtual = IOP331_PCI_LOWER_IO_VA,
+ .pfn = __phys_to_pfn(IOP331_PCI_LOWER_IO_PA),
+ .length = IOP331_PCI_IO_WINDOW_SIZE,
+ .type = MT_DEVICE
+ }
};
static struct uart_port iop331_serial_ports[] = {
diff --git a/arch/arm/mach-iop3xx/iq31244-mm.c b/arch/arm/mach-iop3xx/iq31244-mm.c
index 55992ab586ba..e874b54eefe3 100644
--- a/arch/arm/mach-iop3xx/iq31244-mm.c
+++ b/arch/arm/mach-iop3xx/iq31244-mm.c
@@ -29,10 +29,12 @@
* We use RedBoot's setup for the onboard devices.
*/
static struct map_desc iq31244_io_desc[] __initdata = {
- /* virtual physical length type */
-
- /* on-board devices */
- { IQ31244_UART, IQ31244_UART, 0x00100000, MT_DEVICE }
+ { /* on-board devices */
+ .virtual = IQ31244_UART,
+ .pfn = __phys_to_pfn(IQ31244_UART),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
void __init iq31244_map_io(void)
diff --git a/arch/arm/mach-iop3xx/iq80321-mm.c b/arch/arm/mach-iop3xx/iq80321-mm.c
index bb3e9e5a9aff..d9cac5e1fc3d 100644
--- a/arch/arm/mach-iop3xx/iq80321-mm.c
+++ b/arch/arm/mach-iop3xx/iq80321-mm.c
@@ -29,10 +29,12 @@
* We use RedBoot's setup for the onboard devices.
*/
static struct map_desc iq80321_io_desc[] __initdata = {
- /* virtual physical length type */
-
- /* on-board devices */
- { IQ80321_UART, IQ80321_UART, 0x00100000, MT_DEVICE }
+ { /* on-board devices */
+ .virtual = IQ80321_UART,
+ .pfn = __phys_to_pfn(IQ80321_UART),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
void __init iq80321_map_io(void)
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index f4d7f1f6ef85..01c393c504d0 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -83,42 +83,42 @@ void ixp2000_release_slowport(struct slowport_cfg *old_cfg)
static struct map_desc ixp2000_io_desc[] __initdata = {
{
.virtual = IXP2000_CAP_VIRT_BASE,
- .physical = IXP2000_CAP_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_CAP_PHYS_BASE),
.length = IXP2000_CAP_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_INTCTL_VIRT_BASE,
- .physical = IXP2000_INTCTL_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_INTCTL_PHYS_BASE),
.length = IXP2000_INTCTL_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_PCI_CREG_VIRT_BASE,
- .physical = IXP2000_PCI_CREG_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_PCI_CREG_PHYS_BASE),
.length = IXP2000_PCI_CREG_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_PCI_CSR_VIRT_BASE,
- .physical = IXP2000_PCI_CSR_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_PCI_CSR_PHYS_BASE),
.length = IXP2000_PCI_CSR_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_MSF_VIRT_BASE,
- .physical = IXP2000_MSF_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_MSF_PHYS_BASE),
.length = IXP2000_MSF_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_PCI_IO_VIRT_BASE,
- .physical = IXP2000_PCI_IO_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_PCI_IO_PHYS_BASE),
.length = IXP2000_PCI_IO_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_PCI_CFG0_VIRT_BASE,
- .physical = IXP2000_PCI_CFG0_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_PCI_CFG0_PHYS_BASE),
.length = IXP2000_PCI_CFG0_SIZE,
.type = MT_DEVICE
}, {
.virtual = IXP2000_PCI_CFG1_VIRT_BASE,
- .physical = IXP2000_PCI_CFG1_PHYS_BASE,
+ .pfn = __phys_to_pfn(IXP2000_PCI_CFG1_PHYS_BASE),
.length = IXP2000_PCI_CFG1_SIZE,
.type = MT_DEVICE
}
diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c
index 63ba0191aa65..8b4a839b6279 100644
--- a/arch/arm/mach-ixp2000/ixdp2x00.c
+++ b/arch/arm/mach-ixp2000/ixdp2x00.c
@@ -176,7 +176,7 @@ void ixdp2x00_init_irq(volatile unsigned long *stat_reg, volatile unsigned long
*************************************************************************/
static struct map_desc ixdp2x00_io_desc __initdata = {
.virtual = IXDP2X00_VIRT_CPLD_BASE,
- .physical = IXDP2X00_PHYS_CPLD_BASE,
+ .pfn = __phys_to_pfn(IXDP2X00_PHYS_CPLD_BASE),
.length = IXDP2X00_CPLD_SIZE,
.type = MT_DEVICE
};
diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c
index 7a5109921287..fee1d7b73503 100644
--- a/arch/arm/mach-ixp2000/ixdp2x01.c
+++ b/arch/arm/mach-ixp2000/ixdp2x01.c
@@ -136,7 +136,7 @@ void __init ixdp2x01_init_irq(void)
*************************************************************************/
static struct map_desc ixdp2x01_io_desc __initdata = {
.virtual = IXDP2X01_VIRT_CPLD_BASE,
- .physical = IXDP2X01_PHYS_CPLD_BASE,
+ .pfn = __phys_to_pfn(IXDP2X01_PHYS_CPLD_BASE),
.length = IXDP2X01_CPLD_REGION_SIZE,
.type = MT_DEVICE
};
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index 36b6045213ee..6c396447c4e0 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -44,24 +44,24 @@
static struct map_desc ixp4xx_io_desc[] __initdata = {
{ /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */
.virtual = IXP4XX_PERIPHERAL_BASE_VIRT,
- .physical = IXP4XX_PERIPHERAL_BASE_PHYS,
+ .pfn = __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS),
.length = IXP4XX_PERIPHERAL_REGION_SIZE,
.type = MT_DEVICE
}, { /* Expansion Bus Config Registers */
.virtual = IXP4XX_EXP_CFG_BASE_VIRT,
- .physical = IXP4XX_EXP_CFG_BASE_PHYS,
+ .pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS),
.length = IXP4XX_EXP_CFG_REGION_SIZE,
.type = MT_DEVICE
}, { /* PCI Registers */
.virtual = IXP4XX_PCI_CFG_BASE_VIRT,
- .physical = IXP4XX_PCI_CFG_BASE_PHYS,
+ .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS),
.length = IXP4XX_PCI_CFG_REGION_SIZE,
.type = MT_DEVICE
},
#ifdef CONFIG_DEBUG_LL
{ /* Debug UART mapping */
.virtual = IXP4XX_DEBUG_UART_BASE_VIRT,
- .physical = IXP4XX_DEBUG_UART_BASE_PHYS,
+ .pfn = __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS),
.length = IXP4XX_DEBUG_UART_REGION_SIZE,
.type = MT_DEVICE
}
diff --git a/arch/arm/mach-lh7a40x/arch-kev7a400.c b/arch/arm/mach-lh7a40x/arch-kev7a400.c
index cb3dcd3bd00a..19f2fa2244c4 100644
--- a/arch/arm/mach-lh7a40x/arch-kev7a400.c
+++ b/arch/arm/mach-lh7a40x/arch-kev7a400.c
@@ -26,8 +26,17 @@
/* This function calls the board specific IRQ initialization function. */
static struct map_desc kev7a400_io_desc[] __initdata = {
- { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE },
- { CPLD_VIRT, CPLD_PHYS, CPLD_SIZE, MT_DEVICE },
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD_VIRT,
+ .pfn = __phys_to_pfn(CPLD_PHYS),
+ .length = CPLD_SIZE,
+ .type = MT_DEVICE
+ }
};
void __init kev7a400_map_io(void)
diff --git a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
index 6eb61a17c63b..a20eabc132b0 100644
--- a/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
+++ b/arch/arm/mach-lh7a40x/arch-lpd7a40x.c
@@ -227,23 +227,79 @@ void __init lh7a40x_init_board_irq (void)
}
static struct map_desc lpd7a400_io_desc[] __initdata = {
- { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE },
- /* Mapping added to work around chip select problems */
- { IOBARRIER_VIRT, IOBARRIER_PHYS, IOBARRIER_SIZE, MT_DEVICE },
- { CF_VIRT, CF_PHYS, CF_SIZE, MT_DEVICE },
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ }, { /* Mapping added to work around chip select problems */
+ .virtual = IOBARRIER_VIRT,
+ .pfn = __phys_to_pfn(IOBARRIER_PHYS),
+ .length = IOBARRIER_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CF_VIRT,
+ .pfn = __phys_to_pfn(CF_PHYS),
+ .length = CF_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD02_VIRT,
+ .pfn = __phys_to_pfn(CPLD02_PHYS),
+ .length = CPLD02_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD06_VIRT,
+ .pfn = __phys_to_pfn(CPLD06_PHYS),
+ .length = CPLD06_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD08_VIRT,
+ .pfn = __phys_to_pfn(CPLD08_PHYS),
+ .length = CPLD08_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD0C_VIRT,
+ .pfn = __phys_to_pfn(CPLD0C_PHYS),
+ .length = CPLD0C_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD0E_VIRT,
+ .pfn = __phys_to_pfn(CPLD0E_PHYS),
+ .length = CPLD0E_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD10_VIRT,
+ .pfn = __phys_to_pfn(CPLD10_PHYS),
+ .length = CPLD10_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD12_VIRT,
+ .pfn = __phys_to_pfn(CPLD12_PHYS),
+ .length = CPLD12_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD14_VIRT,
+ .pfn = __phys_to_pfn(CPLD14_PHYS),
+ .length = CPLD14_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD16_VIRT,
+ .pfn = __phys_to_pfn(CPLD16_PHYS),
+ .length = CPLD16_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD18_VIRT,
+ .pfn = __phys_to_pfn(CPLD18_PHYS),
+ .length = CPLD18_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = CPLD1A_VIRT,
+ .pfn = __phys_to_pfn(CPLD1A_PHYS),
+ .length = CPLD1A_SIZE,
+ .type = MT_DEVICE
+ },
/* This mapping is redundant since the smc driver performs another. */
/* { CPLD00_VIRT, CPLD00_PHYS, CPLD00_SIZE, MT_DEVICE }, */
- { CPLD02_VIRT, CPLD02_PHYS, CPLD02_SIZE, MT_DEVICE },
- { CPLD06_VIRT, CPLD06_PHYS, CPLD06_SIZE, MT_DEVICE },
- { CPLD08_VIRT, CPLD08_PHYS, CPLD08_SIZE, MT_DEVICE },
- { CPLD0C_VIRT, CPLD0C_PHYS, CPLD0C_SIZE, MT_DEVICE },
- { CPLD0E_VIRT, CPLD0E_PHYS, CPLD0E_SIZE, MT_DEVICE },
- { CPLD10_VIRT, CPLD10_PHYS, CPLD10_SIZE, MT_DEVICE },
- { CPLD12_VIRT, CPLD12_PHYS, CPLD12_SIZE, MT_DEVICE },
- { CPLD14_VIRT, CPLD14_PHYS, CPLD14_SIZE, MT_DEVICE },
- { CPLD16_VIRT, CPLD16_PHYS, CPLD16_SIZE, MT_DEVICE },
- { CPLD18_VIRT, CPLD18_PHYS, CPLD18_SIZE, MT_DEVICE },
- { CPLD1A_VIRT, CPLD1A_PHYS, CPLD1A_SIZE, MT_DEVICE },
};
void __init
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index df0312b596e4..fd9183ff2ed5 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -103,8 +103,12 @@ static struct platform_device innovator_flash_device = {
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc innovator1510_io_desc[] __initdata = {
-{ OMAP1510_FPGA_BASE, OMAP1510_FPGA_START, OMAP1510_FPGA_SIZE,
- MT_DEVICE },
+ {
+ .virtual = OMAP1510_FPGA_BASE,
+ .pfn = __phys_to_pfn(OMAP1510_FPGA_START),
+ .length = OMAP1510_FPGA_SIZE,
+ .type = MT_DEVICE
+ }
};
static struct resource innovator1510_smc91x_resources[] = {
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 107c68c8ab54..2ba26e239108 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -134,8 +134,12 @@ void omap_perseus2_init_irq(void)
/* Only FPGA needs to be mapped here. All others are done with ioremap */
static struct map_desc omap_perseus2_io_desc[] __initdata = {
- {H2P2_DBG_FPGA_BASE, H2P2_DBG_FPGA_START, H2P2_DBG_FPGA_SIZE,
- MT_DEVICE},
+ {
+ .virtual = H2P2_DBG_FPGA_BASE,
+ .pfn = __phys_to_pfn(H2P2_DBG_FPGA_START),
+ .length = H2P2_DBG_FPGA_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init omap_perseus2_map_io(void)
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index eb8261d7dead..79fb86535ebc 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -26,27 +26,59 @@ extern void omap_sram_init(void);
* default mapping provided here.
*/
static struct map_desc omap_io_desc[] __initdata = {
- { IO_VIRT, IO_PHYS, IO_SIZE, MT_DEVICE },
+ {
+ .virtual = IO_VIRT,
+ .pfn = __phys_to_pfn(IO_PHYS),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ }
};
#ifdef CONFIG_ARCH_OMAP730
static struct map_desc omap730_io_desc[] __initdata = {
- { OMAP730_DSP_BASE, OMAP730_DSP_START, OMAP730_DSP_SIZE, MT_DEVICE },
- { OMAP730_DSPREG_BASE, OMAP730_DSPREG_START, OMAP730_DSPREG_SIZE, MT_DEVICE },
+ {
+ .virtual = OMAP730_DSP_BASE,
+ .pfn = __phys_to_pfn(OMAP730_DSP_START),
+ .length = OMAP730_DSP_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = OMAP730_DSPREG_BASE,
+ .pfn = __phys_to_pfn(OMAP730_DSPREG_START),
+ .length = OMAP730_DSPREG_SIZE,
+ .type = MT_DEVICE
+ }
};
#endif
#ifdef CONFIG_ARCH_OMAP1510
static struct map_desc omap1510_io_desc[] __initdata = {
- { OMAP1510_DSP_BASE, OMAP1510_DSP_START, OMAP1510_DSP_SIZE, MT_DEVICE },
- { OMAP1510_DSPREG_BASE, OMAP1510_DSPREG_START, OMAP1510_DSPREG_SIZE, MT_DEVICE },
+ {
+ .virtual = OMAP1510_DSP_BASE,
+ .pfn = __phys_to_pfn(OMAP1510_DSP_START),
+ .length = OMAP1510_DSP_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = OMAP1510_DSPREG_BASE,
+ .pfn = __phys_to_pfn(OMAP1510_DSPREG_START),
+ .length = OMAP1510_DSPREG_SIZE,
+ .type = MT_DEVICE
+ }
};
#endif
#if defined(CONFIG_ARCH_OMAP16XX)
static struct map_desc omap16xx_io_desc[] __initdata = {
- { OMAP16XX_DSP_BASE, OMAP16XX_DSP_START, OMAP16XX_DSP_SIZE, MT_DEVICE },
- { OMAP16XX_DSPREG_BASE, OMAP16XX_DSPREG_START, OMAP16XX_DSPREG_SIZE, MT_DEVICE },
+ {
+ .virtual = OMAP16XX_DSP_BASE,
+ .pfn = __phys_to_pfn(OMAP16XX_DSP_START),
+ .length = OMAP16XX_DSP_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = OMAP16XX_DSPREG_BASE,
+ .pfn = __phys_to_pfn(OMAP16XX_DSPREG_START),
+ .length = OMAP16XX_DSPREG_SIZE,
+ .type = MT_DEVICE
+ }
};
#endif
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
index 850538fadece..370df113dc06 100644
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ b/arch/arm/mach-pxa/corgi_lcd.c
@@ -488,6 +488,7 @@ static int is_pxafb_device(struct device * dev, void * data)
unsigned long spitz_get_hsync_len(void)
{
+#ifdef CONFIG_FB_PXA
if (!spitz_pxafb_dev) {
spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
if (!spitz_pxafb_dev)
@@ -496,6 +497,7 @@ unsigned long spitz_get_hsync_len(void)
if (!get_hsync_time)
get_hsync_time = symbol_get(pxafb_get_hsync_time);
if (!get_hsync_time)
+#endif
return 0;
return pxafb_get_hsync_time(spitz_pxafb_dev);
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
index 0ef428287055..136c269db0b7 100644
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ b/arch/arm/mach-pxa/corgi_ssp.c
@@ -222,24 +222,22 @@ static int corgi_ssp_remove(struct device *dev)
return 0;
}
-static int corgi_ssp_suspend(struct device *dev, pm_message_t state, u32 level)
+static int corgi_ssp_suspend(struct device *dev, pm_message_t state)
{
- if (level == SUSPEND_POWER_DOWN) {
- ssp_flush(&corgi_ssp_dev);
- ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
- }
+ ssp_flush(&corgi_ssp_dev);
+ ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
+
return 0;
}
-static int corgi_ssp_resume(struct device *dev, u32 level)
+static int corgi_ssp_resume(struct device *dev)
{
- if (level == RESUME_POWER_ON) {
- GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */
- GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
- GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
- ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
- ssp_enable(&corgi_ssp_dev);
- }
+ GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */
+ GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
+ GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
+ ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
+ ssp_enable(&corgi_ssp_dev);
+
return 0;
}
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 1d7677669a76..3248bc9b9495 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -34,6 +34,7 @@
#include
#include
#include
+#include
#include
#include "generic.h"
@@ -92,14 +93,42 @@ EXPORT_SYMBOL(pxa_set_cken);
* and cache flush area.
*/
static struct map_desc standard_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf2000000, 0x40000000, 0x02000000, MT_DEVICE }, /* Devs */
- { 0xf4000000, 0x44000000, 0x00100000, MT_DEVICE }, /* LCD */
- { 0xf6000000, 0x48000000, 0x00100000, MT_DEVICE }, /* Mem Ctl */
- { 0xf8000000, 0x4c000000, 0x00100000, MT_DEVICE }, /* USB host */
- { 0xfa000000, 0x50000000, 0x00100000, MT_DEVICE }, /* Camera */
- { 0xfe000000, 0x58000000, 0x00100000, MT_DEVICE }, /* IMem ctl */
- { 0xff000000, 0x00000000, 0x00100000, MT_DEVICE } /* UNCACHED_PHYS_0 */
+ { /* Devs */
+ .virtual = 0xf2000000,
+ .pfn = __phys_to_pfn(0x40000000),
+ .length = 0x02000000,
+ .type = MT_DEVICE
+ }, { /* LCD */
+ .virtual = 0xf4000000,
+ .pfn = __phys_to_pfn(0x44000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* Mem Ctl */
+ .virtual = 0xf6000000,
+ .pfn = __phys_to_pfn(0x48000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* USB host */
+ .virtual = 0xf8000000,
+ .pfn = __phys_to_pfn(0x4c000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* Camera */
+ .virtual = 0xfa000000,
+ .pfn = __phys_to_pfn(0x50000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* IMem ctl */
+ .virtual = 0xfe000000,
+ .pfn = __phys_to_pfn(0x58000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* UNCACHED_PHYS_0 */
+ .virtual = 0xff000000,
+ .pfn = __phys_to_pfn(0x00000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
void __init pxa_map_io(void)
@@ -225,6 +254,10 @@ static struct platform_device stuart_device = {
.name = "pxa2xx-uart",
.id = 2,
};
+static struct platform_device hwuart_device = {
+ .name = "pxa2xx-uart",
+ .id = 3,
+};
static struct resource i2c_resources[] = {
{
@@ -265,10 +298,26 @@ static struct resource i2s_resources[] = {
static struct platform_device i2s_device = {
.name = "pxa2xx-i2s",
.id = -1,
- .resource = i2c_resources,
+ .resource = i2s_resources,
.num_resources = ARRAY_SIZE(i2s_resources),
};
+static u64 pxaficp_dmamask = ~(u32)0;
+
+static struct platform_device pxaficp_device = {
+ .name = "pxa2xx-ir",
+ .id = -1,
+ .dev = {
+ .dma_mask = &pxaficp_dmamask,
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+void __init pxa_set_ficp_info(struct pxaficp_platform_data *info)
+{
+ pxaficp_device.dev.platform_data = info;
+}
+
static struct platform_device *devices[] __initdata = {
&pxamci_device,
&udc_device,
@@ -276,13 +325,26 @@ static struct platform_device *devices[] __initdata = {
&ffuart_device,
&btuart_device,
&stuart_device,
+ &pxaficp_device,
&i2c_device,
&i2s_device,
};
static int __init pxa_init(void)
{
- return platform_add_devices(devices, ARRAY_SIZE(devices));
+ int cpuid, ret;
+
+ ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+ if (ret)
+ return ret;
+
+ /* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
+ cpuid = read_cpuid(CPUID_ID);
+ if (((cpuid >> 4) & 0xfff) == 0x2d0 ||
+ ((cpuid >> 4) & 0xfff) == 0x290)
+ ret = platform_device_register(&hwuart_device);
+
+ return ret;
}
subsys_initcall(pxa_init);
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 386e107b53cc..01a83ab09ac3 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -152,16 +152,17 @@ static void __init idp_init_irq(void)
}
static struct map_desc idp_io_desc[] __initdata = {
- /* virtual physical length type */
-
- { IDP_COREVOLT_VIRT,
- IDP_COREVOLT_PHYS,
- IDP_COREVOLT_SIZE,
- MT_DEVICE },
- { IDP_CPLD_VIRT,
- IDP_CPLD_PHYS,
- IDP_CPLD_SIZE,
- MT_DEVICE }
+ {
+ .virtual = IDP_COREVOLT_VIRT,
+ .pfn = __phys_to_pfn(IDP_COREVOLT_PHYS),
+ .length = IDP_COREVOLT_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IDP_CPLD_VIRT,
+ .pfn = __phys_to_pfn(IDP_CPLD_PHYS),
+ .length = IDP_CPLD_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init idp_map_io(void)
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 1f38033921e9..beccf455f796 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -35,6 +35,7 @@
#include
#include
#include
+#include
#include
#include
@@ -237,16 +238,40 @@ static struct pxamci_platform_data lubbock_mci_platform_data = {
.init = lubbock_mci_init,
};
+static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (mode & IR_SIRMODE) {
+ LUB_MISC_WR &= ~(1 << 4);
+ } else if (mode & IR_FIRMODE) {
+ LUB_MISC_WR |= 1 << 4;
+ }
+ local_irq_restore(flags);
+}
+
+static struct pxaficp_platform_data lubbock_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE,
+ .transceiver_mode = lubbock_irda_transceiver_mode,
+};
+
static void __init lubbock_init(void)
{
pxa_set_udc_info(&udc_info);
set_pxa_fb_info(&sharp_lm8v31);
pxa_set_mci_info(&lubbock_mci_platform_data);
+ pxa_set_ficp_info(&lubbock_ficp_platform_data);
(void) platform_add_devices(devices, ARRAY_SIZE(devices));
}
static struct map_desc lubbock_io_desc[] __initdata = {
- { LUBBOCK_FPGA_VIRT, LUBBOCK_FPGA_PHYS, 0x00100000, MT_DEVICE }, /* CPLD */
+ { /* CPLD */
+ .virtual = LUBBOCK_FPGA_VIRT,
+ .pfn = __phys_to_pfn(LUBBOCK_FPGA_PHYS),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
static void __init lubbock_map_io(void)
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 85fdb5b1470a..a48c64026e1f 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -37,6 +37,7 @@
#include
#include
#include
+#include
#include "generic.h"
@@ -294,6 +295,29 @@ static struct pxamci_platform_data mainstone_mci_platform_data = {
.exit = mainstone_mci_exit,
};
+static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (mode & IR_SIRMODE) {
+ MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR;
+ } else if (mode & IR_FIRMODE) {
+ MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
+ }
+ if (mode & IR_OFF) {
+ MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
+ } else {
+ MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL;
+ }
+ local_irq_restore(flags);
+}
+
+static struct pxaficp_platform_data mainstone_ficp_platform_data = {
+ .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
+ .transceiver_mode = mainstone_irda_transceiver_mode,
+};
+
static void __init mainstone_init(void)
{
/*
@@ -313,11 +337,17 @@ static void __init mainstone_init(void)
set_pxa_fb_info(&toshiba_ltm035a776c);
pxa_set_mci_info(&mainstone_mci_platform_data);
+ pxa_set_ficp_info(&mainstone_ficp_platform_data);
}
static struct map_desc mainstone_io_desc[] __initdata = {
- { MST_FPGA_VIRT, MST_FPGA_PHYS, 0x00100000, MT_DEVICE }, /* CPLD */
+ { /* CPLD */
+ .virtual = MST_FPGA_VIRT,
+ .pfn = __phys_to_pfn(MST_FPGA_PHYS),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
static void __init mainstone_map_io(void)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 7869c3b4e62f..573a5758e781 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -129,7 +129,7 @@ void pxa_cpu_pm_enter(suspend_state_t state)
case PM_SUSPEND_MEM:
/* set resume return address */
PSPR = virt_to_phys(pxa_cpu_resume);
- pxa_cpu_suspend(3);
+ pxa_cpu_suspend(PWRMODE_SLEEP);
break;
}
}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 9a791b07118d..09a5d593f04b 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -157,7 +157,7 @@ void pxa_cpu_pm_enter(suspend_state_t state)
case PM_SUSPEND_MEM:
/* set resume return address */
PSPR = virt_to_phys(pxa_cpu_resume);
- pxa_cpu_suspend(3);
+ pxa_cpu_suspend(PWRMODE_SLEEP);
break;
}
}
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 5786ccad938c..c9862688ff3d 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -28,7 +28,9 @@
/*
* pxa_cpu_suspend()
*
- * Forces CPU into sleep state
+ * Forces CPU into sleep state.
+ *
+ * r0 = value for PWRMODE M field for desired sleep state
*/
ENTRY(pxa_cpu_suspend)
@@ -53,6 +55,7 @@ ENTRY(pxa_cpu_suspend)
mov r10, sp
stmfd sp!, {r3 - r10}
+ mov r5, r0 @ save sleep mode
@ preserve phys address of stack
mov r0, sp
bl sleep_phys_sp
@@ -66,7 +69,7 @@ ENTRY(pxa_cpu_suspend)
@ (also workaround for sighting 28071)
@ prepare value for sleep mode
- mov r1, #3 @ sleep mode
+ mov r1, r5 @ sleep mode
@ prepare pointer to physical address 0 (virtual mapping in generic.c)
mov r2, #UNCACHED_PHYS_0
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index 8a3f27b76784..6f6dbbd08021 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -21,7 +21,7 @@
ENTRY(pxa_cpu_standby)
ldr r0, =PSSR
mov r1, #(PSSR_PH | PSSR_STS)
- mov r2, #2
+ mov r2, #PWRMODE_STANDBY
mov r3, #UNCACHED_PHYS_0 @ Read mem context in.
ldr ip, [r3]
b 1f
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index e3587efec4bf..5c4ac1c008a6 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -61,9 +61,22 @@ static int __init parse_tag_acorn(const struct tag *tag)
__tagtable(ATAG_ACORN, parse_tag_acorn);
static struct map_desc rpc_io_desc[] __initdata = {
- { SCREEN_BASE, SCREEN_START, 2*1048576, MT_DEVICE }, /* VRAM */
- { (u32)IO_BASE, IO_START, IO_SIZE , MT_DEVICE }, /* IO space */
- { EASI_BASE, EASI_START, EASI_SIZE, MT_DEVICE } /* EASI space */
+ { /* VRAM */
+ .virtual = SCREEN_BASE,
+ .pfn = __phys_to_pfn(SCREEN_START),
+ .length = 2*1048576,
+ .type = MT_DEVICE
+ }, { /* IO space */
+ .virtual = (u32)IO_BASE,
+ .pfn = __phys_to_pfn(IO_START),
+ .length = IO_SIZE ,
+ .type = MT_DEVICE
+ }, { /* EASI space */
+ .virtual = EASI_BASE,
+ .pfn = __phys_to_pfn(EASI_START),
+ .length = EASI_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init rpc_map_io(void)
diff --git a/arch/arm/mach-s3c2410/cpu.h b/arch/arm/mach-s3c2410/cpu.h
index 478c15c0e36a..9cbe5eef492b 100644
--- a/arch/arm/mach-s3c2410/cpu.h
+++ b/arch/arm/mach-s3c2410/cpu.h
@@ -21,7 +21,7 @@
/* todo - fix when rmk changes iodescs to use `void __iomem *` */
-#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, S3C2410_PA_##x, S3C24XX_SZ_##x, MT_DEVICE }
+#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C2410_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef MHZ
#define MHZ (1000*1000)
diff --git a/arch/arm/mach-s3c2410/devs.c b/arch/arm/mach-s3c2410/devs.c
index 0077937a7ab8..08bc7d95a45d 100644
--- a/arch/arm/mach-s3c2410/devs.c
+++ b/arch/arm/mach-s3c2410/devs.c
@@ -47,7 +47,7 @@ struct platform_device *s3c24xx_uart_devs[3];
static struct resource s3c_usb_resource[] = {
[0] = {
.start = S3C2410_PA_USBHOST,
- .end = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST,
+ .end = S3C2410_PA_USBHOST + S3C24XX_SZ_USBHOST - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -77,7 +77,7 @@ EXPORT_SYMBOL(s3c_device_usb);
static struct resource s3c_lcd_resource[] = {
[0] = {
.start = S3C2410_PA_LCD,
- .end = S3C2410_PA_LCD + S3C24XX_SZ_LCD,
+ .end = S3C2410_PA_LCD + S3C24XX_SZ_LCD - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -103,21 +103,25 @@ struct platform_device s3c_device_lcd = {
EXPORT_SYMBOL(s3c_device_lcd);
-static struct s3c2410fb_mach_info s3c2410fb_info;
-
-void __init set_s3c2410fb_info(struct s3c2410fb_mach_info *hard_s3c2410fb_info)
+void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
{
- memcpy(&s3c2410fb_info,hard_s3c2410fb_info,sizeof(struct s3c2410fb_mach_info));
- s3c_device_lcd.dev.platform_data = &s3c2410fb_info;
+ struct s3c2410fb_mach_info *npd;
+
+ npd = kmalloc(sizeof(*npd), GFP_KERNEL);
+ if (npd) {
+ memcpy(npd, pd, sizeof(*npd));
+ s3c_device_lcd.dev.platform_data = npd;
+ } else {
+ printk(KERN_ERR "no memory for LCD platform data\n");
+ }
}
-EXPORT_SYMBOL(set_s3c2410fb_info);
/* NAND Controller */
static struct resource s3c_nand_resource[] = {
[0] = {
.start = S3C2410_PA_NAND,
- .end = S3C2410_PA_NAND + S3C24XX_SZ_NAND,
+ .end = S3C2410_PA_NAND + S3C24XX_SZ_NAND - 1,
.flags = IORESOURCE_MEM,
}
};
@@ -136,7 +140,7 @@ EXPORT_SYMBOL(s3c_device_nand);
static struct resource s3c_usbgadget_resource[] = {
[0] = {
.start = S3C2410_PA_USBDEV,
- .end = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV,
+ .end = S3C2410_PA_USBDEV + S3C24XX_SZ_USBDEV - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -161,7 +165,7 @@ EXPORT_SYMBOL(s3c_device_usbgadget);
static struct resource s3c_wdt_resource[] = {
[0] = {
.start = S3C2410_PA_WATCHDOG,
- .end = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG,
+ .end = S3C2410_PA_WATCHDOG + S3C24XX_SZ_WATCHDOG - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -186,7 +190,7 @@ EXPORT_SYMBOL(s3c_device_wdt);
static struct resource s3c_i2c_resource[] = {
[0] = {
.start = S3C2410_PA_IIC,
- .end = S3C2410_PA_IIC + S3C24XX_SZ_IIC,
+ .end = S3C2410_PA_IIC + S3C24XX_SZ_IIC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -211,7 +215,7 @@ EXPORT_SYMBOL(s3c_device_i2c);
static struct resource s3c_iis_resource[] = {
[0] = {
.start = S3C2410_PA_IIS,
- .end = S3C2410_PA_IIS + S3C24XX_SZ_IIS,
+ .end = S3C2410_PA_IIS + S3C24XX_SZ_IIS -1,
.flags = IORESOURCE_MEM,
}
};
@@ -265,7 +269,7 @@ EXPORT_SYMBOL(s3c_device_rtc);
static struct resource s3c_adc_resource[] = {
[0] = {
.start = S3C2410_PA_ADC,
- .end = S3C2410_PA_ADC + S3C24XX_SZ_ADC,
+ .end = S3C2410_PA_ADC + S3C24XX_SZ_ADC - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -288,7 +292,7 @@ struct platform_device s3c_device_adc = {
static struct resource s3c_sdi_resource[] = {
[0] = {
.start = S3C2410_PA_SDI,
- .end = S3C2410_PA_SDI + S3C24XX_SZ_SDI,
+ .end = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
@@ -465,7 +469,7 @@ EXPORT_SYMBOL(s3c_device_timer3);
static struct resource s3c_camif_resource[] = {
[0] = {
.start = S3C2440_PA_CAMIF,
- .end = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF,
+ .end = S3C2440_PA_CAMIF + S3C2440_SZ_CAMIF - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c
index 94f1776cf312..23ea3d5fa09c 100644
--- a/arch/arm/mach-s3c2410/gpio.c
+++ b/arch/arm/mach-s3c2410/gpio.c
@@ -30,6 +30,7 @@
* 04-Oct-2004 BJD Added irq filter controls for GPIO
* 05-Nov-2004 BJD EXPORT_SYMBOL() added for all code
* 13-Mar-2005 BJD Updates for __iomem
+ * 26-Oct-2005 BJD Added generic configuration types
*/
@@ -58,6 +59,27 @@ void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function)
mask = 3 << S3C2410_GPIO_OFFSET(pin)*2;
}
+ switch (function) {
+ case S3C2410_GPIO_LEAVE:
+ mask = 0;
+ function = 0;
+ break;
+
+ case S3C2410_GPIO_INPUT:
+ case S3C2410_GPIO_OUTPUT:
+ case S3C2410_GPIO_SFN2:
+ case S3C2410_GPIO_SFN3:
+ if (pin < S3C2410_GPIO_BANKB) {
+ function &= 1;
+ function <<= S3C2410_GPIO_OFFSET(pin);
+ } else {
+ function &= 3;
+ function <<= S3C2410_GPIO_OFFSET(pin)*2;
+ }
+ }
+
+ /* modify the specified register wwith IRQs off */
+
local_irq_save(flags);
con = __raw_readl(base + 0x00);
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 7b51bfd0ba6d..c1b5c63ec24a 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -32,6 +32,7 @@
* 25-Jul-2005 BJD Removed ASIX static mappings
* 27-Jul-2005 BJD Ensure maximum frequency of i2c bus
* 20-Sep-2005 BJD Added static to non-exported items
+ * 26-Oct-2005 BJD Added FB platform data
*/
#include
@@ -61,8 +62,10 @@
#include
#include
#include
+
#include
#include
+#include
#include
#include
@@ -399,6 +402,38 @@ static struct s3c2410_platform_i2c bast_i2c_info = {
.max_freq = 130*1000,
};
+
+static struct s3c2410fb_mach_info __initdata bast_lcd_info = {
+ .width = 640,
+ .height = 480,
+
+ .xres = {
+ .min = 320,
+ .max = 1024,
+ .defval = 640,
+ },
+
+ .yres = {
+ .min = 240,
+ .max = 600,
+ .defval = 480,
+ },
+
+ .bpp = {
+ .min = 4,
+ .max = 16,
+ .defval = 8,
+ },
+
+ .regs = {
+ .lcdcon1 = 0x00000176,
+ .lcdcon2 = 0x1d77c7c2,
+ .lcdcon3 = 0x013a7f13,
+ .lcdcon4 = 0x00000057,
+ .lcdcon5 = 0x00014b02,
+ }
+};
+
/* Standard BAST devices */
static struct platform_device *bast_devices[] __initdata = {
@@ -454,6 +489,10 @@ static void __init bast_map_io(void)
usb_simtec_init();
}
+static void __init bast_init(void)
+{
+ s3c24xx_fb_set_platdata(&bast_lcd_info);
+}
MACHINE_START(BAST, "Simtec-BAST")
/* Maintainer: Ben Dooks */
@@ -463,5 +502,6 @@ MACHINE_START(BAST, "Simtec-BAST")
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = bast_map_io,
.init_irq = s3c24xx_init_irq,
+ .init_machine = bast_init,
.timer = &s3c24xx_timer,
MACHINE_END
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index fb3cb01266e5..7efeaaad2361 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -25,6 +25,7 @@
* 14-Jan-2005 BJD Added clock init
* 10-Mar-2005 LCVR Changed S3C2410_VA to S3C24XX_VA
* 20-Sep-2005 BJD Added static to non-exported items
+ * 26-Oct-2005 BJD Changed name of fb init call
*/
#include
@@ -164,7 +165,7 @@ static void __init h1940_init_irq(void)
static void __init h1940_init(void)
{
- set_s3c2410fb_info(&h1940_lcdcfg);
+ s3c24xx_fb_set_platdata(&h1940_lcdcfg);
}
MACHINE_START(H1940, "IPAQ-H1940")
diff --git a/arch/arm/mach-s3c2410/mach-smdk2440.c b/arch/arm/mach-s3c2410/mach-smdk2440.c
index 722ef46b630a..6950e61b7914 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2440.c
@@ -19,6 +19,7 @@
* 10-Mar-2005 LCVR Replaced S3C2410_VA by S3C24XX_VA
* 14-Mar-2005 BJD void __iomem fixes
* 20-Sep-2005 BJD Added static to non-exported items
+ * 26-Oct-2005 BJD Added framebuffer data
*/
#include
@@ -41,7 +42,10 @@
//#include
#include
#include
+#include
+
#include
+#include
#include "s3c2410.h"
#include "s3c2440.h"
@@ -86,6 +90,70 @@ static struct s3c2410_uartcfg smdk2440_uartcfgs[] = {
}
};
+/* LCD driver info */
+
+static struct s3c2410fb_mach_info smdk2440_lcd_cfg __initdata = {
+ .regs = {
+
+ .lcdcon1 = S3C2410_LCDCON1_TFT16BPP |
+ S3C2410_LCDCON1_TFT |
+ S3C2410_LCDCON1_CLKVAL(0x04),
+
+ .lcdcon2 = S3C2410_LCDCON2_VBPD(7) |
+ S3C2410_LCDCON2_LINEVAL(319) |
+ S3C2410_LCDCON2_VFPD(6) |
+ S3C2410_LCDCON2_VSPW(3),
+
+ .lcdcon3 = S3C2410_LCDCON3_HBPD(19) |
+ S3C2410_LCDCON3_HOZVAL(239) |
+ S3C2410_LCDCON3_HFPD(7),
+
+ .lcdcon4 = S3C2410_LCDCON4_MVAL(0) |
+ S3C2410_LCDCON4_HSPW(3),
+
+ .lcdcon5 = S3C2410_LCDCON5_FRM565 |
+ S3C2410_LCDCON5_INVVLINE |
+ S3C2410_LCDCON5_INVVFRAME |
+ S3C2410_LCDCON5_PWREN |
+ S3C2410_LCDCON5_HWSWP,
+ },
+
+#if 0
+ /* currently setup by downloader */
+ .gpccon = 0xaa940659,
+ .gpccon_mask = 0xffffffff,
+ .gpcup = 0x0000ffff,
+ .gpcup_mask = 0xffffffff,
+ .gpdcon = 0xaa84aaa0,
+ .gpdcon_mask = 0xffffffff,
+ .gpdup = 0x0000faff,
+ .gpdup_mask = 0xffffffff,
+#endif
+
+ .lpcsel = ((0xCE6) & ~7) | 1<<4,
+
+ .width = 240,
+ .height = 320,
+
+ .xres = {
+ .min = 240,
+ .max = 240,
+ .defval = 240,
+ },
+
+ .yres = {
+ .min = 320,
+ .max = 320,
+ .defval = 320,
+ },
+
+ .bpp = {
+ .min = 16,
+ .max = 16,
+ .defval = 16,
+ },
+};
+
static struct platform_device *smdk2440_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_lcd,
@@ -121,6 +189,8 @@ static void __init smdk2440_machine_init(void)
s3c2410_gpio_setpin(S3C2410_GPF6, 0);
s3c2410_gpio_setpin(S3C2410_GPF7, 0);
+ s3c24xx_fb_set_platdata(&smdk2440_lcd_cfg);
+
s3c2410_pm_init();
}
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 24687f511bf5..75efb5da5b6d 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -388,9 +388,17 @@ static struct sa1100_port_fns assabet_port_fns __initdata = {
};
static struct map_desc assabet_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf1000000, 0x12000000, 0x00100000, MT_DEVICE }, /* Board Control Register */
- { 0xf2800000, 0x4b800000, 0x00800000, MT_DEVICE } /* MQ200 */
+ { /* Board Control Register */
+ .virtual = 0xf1000000,
+ .pfn = __phys_to_pfn(0x12000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* MQ200 */
+ .virtual = 0xf2800000,
+ .pfn = __phys_to_pfn(0x4b800000),
+ .length = 0x00800000,
+ .type = MT_DEVICE
+ }
};
static void __init assabet_map_io(void)
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index b6169cb09196..c92cebff7f8e 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -254,10 +254,22 @@ EXPORT_SYMBOL(badge4_set_5V);
static struct map_desc badge4_io_desc[] __initdata = {
- /* virtual physical length type */
- {0xf1000000, 0x08000000, 0x00100000, MT_DEVICE },/* SRAM bank 1 */
- {0xf2000000, 0x10000000, 0x00100000, MT_DEVICE },/* SRAM bank 2 */
- {0xf4000000, 0x48000000, 0x00100000, MT_DEVICE } /* SA-1111 */
+ { /* SRAM bank 1 */
+ .virtual = 0xf1000000,
+ .pfn = __phys_to_pfn(0x08000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* SRAM bank 2 */
+ .virtual = 0xf2000000,
+ .pfn = __phys_to_pfn(0x10000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* SA-1111 */
+ .virtual = 0xf4000000,
+ .pfn = __phys_to_pfn(0x48000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
static void
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index 9484be7dc671..23cb74885275 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -100,8 +100,12 @@ static void __init cerf_init_irq(void)
}
static struct map_desc cerf_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf0000000, 0x08000000, 0x00100000, MT_DEVICE } /* Crystal Ethernet Chip */
+ { /* Crystal Ethernet Chip */
+ .virtual = 0xf0000000,
+ .pfn = __phys_to_pfn(0x08000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
static void __init cerf_map_io(void)
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index 6ecab7e2c238..7fd6e29c36b7 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -171,9 +171,17 @@ static void __init collie_init(void)
}
static struct map_desc collie_io_desc[] __initdata = {
- /* virtual physical length type */
- {0xe8000000, 0x00000000, 0x02000000, MT_DEVICE}, /* 32M main flash (cs0) */
- {0xea000000, 0x08000000, 0x02000000, MT_DEVICE}, /* 32M boot flash (cs1) */
+ { /* 32M main flash (cs0) */
+ .virtual = 0xe8000000,
+ .pfn = __phys_to_pfn(0x00000000),
+ .length = 0x02000000,
+ .type = MT_DEVICE
+ }, { /* 32M boot flash (cs1) */
+ .virtual = 0xea000000,
+ .pfn = __phys_to_pfn(0x08000000),
+ .length = 0x02000000,
+ .type = MT_DEVICE
+ }
};
static void __init collie_map_io(void)
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 3f1e358455e5..93619497779c 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -369,11 +369,27 @@ EXPORT_SYMBOL(sa1100fb_lcd_power);
*/
static struct map_desc standard_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf8000000, 0x80000000, 0x00100000, MT_DEVICE }, /* PCM */
- { 0xfa000000, 0x90000000, 0x00100000, MT_DEVICE }, /* SCM */
- { 0xfc000000, 0xa0000000, 0x00100000, MT_DEVICE }, /* MER */
- { 0xfe000000, 0xb0000000, 0x00200000, MT_DEVICE } /* LCD + DMA */
+ { /* PCM */
+ .virtual = 0xf8000000,
+ .pfn = __phys_to_pfn(0x80000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* SCM */
+ .virtual = 0xfa000000,
+ .pfn = __phys_to_pfn(0x90000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* MER */
+ .virtual = 0xfc000000,
+ .pfn = __phys_to_pfn(0xa0000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* LCD + DMA */
+ .virtual = 0xfe000000,
+ .pfn = __phys_to_pfn(0xb0000000),
+ .length = 0x00200000,
+ .type = MT_DEVICE
+ },
};
void __init sa1100_map_io(void)
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index e7aa2681ca64..e8352b7f74b0 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -223,10 +223,22 @@ static void h3xxx_lcd_power(int enable)
}
static struct map_desc h3600_io_desc[] __initdata = {
- /* virtual physical length type */
- { H3600_BANK_2_VIRT, SA1100_CS2_PHYS, 0x02800000, MT_DEVICE }, /* static memory bank 2 CS#2 */
- { H3600_BANK_4_VIRT, SA1100_CS4_PHYS, 0x00800000, MT_DEVICE }, /* static memory bank 4 CS#4 */
- { H3600_EGPIO_VIRT, H3600_EGPIO_PHYS, 0x01000000, MT_DEVICE }, /* EGPIO 0 CS#5 */
+ { /* static memory bank 2 CS#2 */
+ .virtual = H3600_BANK_2_VIRT,
+ .pfn = __phys_to_pfn(SA1100_CS2_PHYS),
+ .length = 0x02800000,
+ .type = MT_DEVICE
+ }, { /* static memory bank 4 CS#4 */
+ .virtual = H3600_BANK_4_VIRT,
+ .pfn = __phys_to_pfn(SA1100_CS4_PHYS),
+ .length = 0x00800000,
+ .type = MT_DEVICE
+ }, { /* EGPIO 0 CS#5 */
+ .virtual = H3600_EGPIO_VIRT,
+ .pfn = __phys_to_pfn(H3600_EGPIO_PHYS),
+ .length = 0x01000000,
+ .type = MT_DEVICE
+ }
};
/*
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index 502d65cfe654..c922e043c424 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -57,8 +57,12 @@ static void hackkit_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
*/
static struct map_desc hackkit_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xe8000000, 0x00000000, 0x01000000, MT_DEVICE } /* Flash bank 0 */
+ { /* Flash bank 0 */
+ .virtual = 0xe8000000,
+ .pfn = __phys_to_pfn(0x00000000),
+ .length = 0x01000000,
+ .type = MT_DEVICE
+ },
};
static struct sa1100_port_fns hackkit_port_fns __initdata = {
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index 2f497112c96a..9c363bfcf310 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -81,10 +81,22 @@ static int __init jornada720_init(void)
arch_initcall(jornada720_init);
static struct map_desc jornada720_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf0000000, 0x48000000, 0x00100000, MT_DEVICE }, /* Epson registers */
- { 0xf1000000, 0x48200000, 0x00100000, MT_DEVICE }, /* Epson frame buffer */
- { 0xf4000000, 0x40000000, 0x00100000, MT_DEVICE } /* SA-1111 */
+ { /* Epson registers */
+ .virtual = 0xf0000000,
+ .pfn = __phys_to_pfn(0x48000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* Epson frame buffer */
+ .virtual = 0xf1000000,
+ .pfn = __phys_to_pfn(0x48200000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }, { /* SA-1111 */
+ .virtual = 0xf4000000,
+ .pfn = __phys_to_pfn(0x40000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ }
};
static void __init jornada720_map_io(void)
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index ed6744d480af..8c9e3dd52942 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -31,9 +31,17 @@ static void __init lart_init(void)
}
static struct map_desc lart_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xe8000000, 0x00000000, 0x00400000, MT_DEVICE }, /* main flash memory */
- { 0xec000000, 0x08000000, 0x00400000, MT_DEVICE } /* main flash, alternative location */
+ { /* main flash memory */
+ .virtual = 0xe8000000,
+ .pfn = __phys_to_pfn(0x00000000),
+ .length = 0x00400000,
+ .type = MT_DEVICE
+ }, { /* main flash, alternative location */
+ .virtual = 0xec000000,
+ .pfn = __phys_to_pfn(0x08000000),
+ .length = 0x00400000,
+ .type = MT_DEVICE
+ }
};
static void __init lart_map_io(void)
diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c
index fc061641b7be..052e4caedb89 100644
--- a/arch/arm/mach-sa1100/neponset.c
+++ b/arch/arm/mach-sa1100/neponset.c
@@ -178,33 +178,27 @@ static int neponset_probe(struct device *dev)
/*
* LDM power management.
*/
-static int neponset_suspend(struct device *dev, pm_message_t state, u32 level)
+static int neponset_suspend(struct device *dev, pm_message_t state)
{
/*
* Save state.
*/
- if (level == SUSPEND_SAVE_STATE ||
- level == SUSPEND_DISABLE ||
- level == SUSPEND_POWER_DOWN) {
- if (!dev->power.saved_state)
- dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL);
- if (!dev->power.saved_state)
- return -ENOMEM;
+ if (!dev->power.saved_state)
+ dev->power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL);
+ if (!dev->power.saved_state)
+ return -ENOMEM;
- *(unsigned int *)dev->power.saved_state = NCR_0;
- }
+ *(unsigned int *)dev->power.saved_state = NCR_0;
return 0;
}
-static int neponset_resume(struct device *dev, u32 level)
+static int neponset_resume(struct device *dev)
{
- if (level == RESUME_RESTORE_STATE || level == RESUME_ENABLE) {
- if (dev->power.saved_state) {
- NCR_0 = *(unsigned int *)dev->power.saved_state;
- kfree(dev->power.saved_state);
- dev->power.saved_state = NULL;
- }
+ if (dev->power.saved_state) {
+ NCR_0 = *(unsigned int *)dev->power.saved_state;
+ kfree(dev->power.saved_state);
+ dev->power.saved_state = NULL;
}
return 0;
@@ -331,9 +325,17 @@ static int __init neponset_init(void)
subsys_initcall(neponset_init);
static struct map_desc neponset_io_desc[] __initdata = {
- /* virtual physical length type */
- { 0xf3000000, 0x10000000, SZ_1M, MT_DEVICE }, /* System Registers */
- { 0xf4000000, 0x40000000, SZ_1M, MT_DEVICE } /* SA-1111 */
+ { /* System Registers */
+ .virtual = 0xf3000000,
+ .pfn = __phys_to_pfn(0x10000000),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }, { /* SA-1111 */
+ .virtual = 0xf4000000,
+ .pfn = __phys_to_pfn(0x40000000),
+ .length = SZ_1M,
+ .type = MT_DEVICE
+ }
};
void __init neponset_map_io(void)
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 07f6d5fd7bb0..cfb6658e5cdf 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -60,11 +60,17 @@ EXPORT_SYMBOL(set_cs3_bit);
EXPORT_SYMBOL(clear_cs3_bit);
static struct map_desc simpad_io_desc[] __initdata = {
- /* virtual physical length type */
- /* MQ200 */
- { 0xf2800000, 0x4b800000, 0x00800000, MT_DEVICE },
- /* Paules CS3, write only */
- { 0xf1000000, 0x18000000, 0x00100000, MT_DEVICE },
+ { /* MQ200 */
+ .virtual = 0xf2800000,
+ .pfn = __phys_to_pfn(0x4b800000),
+ .length = 0x00800000,
+ .type = MT_DEVICE
+ }, { /* Paules CS3, write only */
+ .virtual = 0xf1000000,
+ .pfn = __phys_to_pfn(0x18000000),
+ .length = 0x00100000,
+ .type = MT_DEVICE
+ },
};
diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c
index 946c0d11c73b..2d428b6dbb58 100644
--- a/arch/arm/mach-shark/core.c
+++ b/arch/arm/mach-shark/core.c
@@ -62,7 +62,12 @@ arch_initcall(shark_init);
extern void shark_init_irq(void);
static struct map_desc shark_io_desc[] __initdata = {
- { IO_BASE , IO_START , IO_SIZE , MT_DEVICE }
+ {
+ .virtual = IO_BASE,
+ .pfn = __phys_to_pfn(IO_START),
+ .length = IO_SIZE,
+ .type = MT_DEVICE
+ }
};
static void __init shark_map_io(void)
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index a30e0451df72..7e4bdd07f4af 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -186,25 +186,82 @@ void __init versatile_init_irq(void)
}
static struct map_desc versatile_io_desc[] __initdata = {
- { IO_ADDRESS(VERSATILE_SYS_BASE), VERSATILE_SYS_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(VERSATILE_SIC_BASE), VERSATILE_SIC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(VERSATILE_VIC_BASE), VERSATILE_VIC_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(VERSATILE_SCTL_BASE), VERSATILE_SCTL_BASE, SZ_4K * 9, MT_DEVICE },
+ {
+ .virtual = IO_ADDRESS(VERSATILE_SYS_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_SYS_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(VERSATILE_SIC_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_SIC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(VERSATILE_VIC_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_VIC_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(VERSATILE_SCTL_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_SCTL_BASE),
+ .length = SZ_4K * 9,
+ .type = MT_DEVICE
+ },
#ifdef CONFIG_MACH_VERSATILE_AB
- { IO_ADDRESS(VERSATILE_GPIO0_BASE), VERSATILE_GPIO0_BASE, SZ_4K, MT_DEVICE },
- { IO_ADDRESS(VERSATILE_IB2_BASE), VERSATILE_IB2_BASE, SZ_64M, MT_DEVICE },
+ {
+ .virtual = IO_ADDRESS(VERSATILE_GPIO0_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_GPIO0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = IO_ADDRESS(VERSATILE_IB2_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_IB2_BASE),
+ .length = SZ_64M,
+ .type = MT_DEVICE
+ },
#endif
#ifdef CONFIG_DEBUG_LL
- { IO_ADDRESS(VERSATILE_UART0_BASE), VERSATILE_UART0_BASE, SZ_4K, MT_DEVICE },
+ {
+ .virtual = IO_ADDRESS(VERSATILE_UART0_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_UART0_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ },
#endif
#ifdef CONFIG_PCI
- { IO_ADDRESS(VERSATILE_PCI_CORE_BASE), VERSATILE_PCI_CORE_BASE, SZ_4K, MT_DEVICE },
- { VERSATILE_PCI_VIRT_BASE, VERSATILE_PCI_BASE, VERSATILE_PCI_BASE_SIZE, MT_DEVICE },
- { VERSATILE_PCI_CFG_VIRT_BASE, VERSATILE_PCI_CFG_BASE, VERSATILE_PCI_CFG_BASE_SIZE, MT_DEVICE },
+ {
+ .virtual = IO_ADDRESS(VERSATILE_PCI_CORE_BASE),
+ .pfn = __phys_to_pfn(VERSATILE_PCI_CORE_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VERSATILE_PCI_VIRT_BASE,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_BASE),
+ .length = VERSATILE_PCI_BASE_SIZE,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VERSATILE_PCI_CFG_VIRT_BASE,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
+ .length = VERSATILE_PCI_CFG_BASE_SIZE,
+ .type = MT_DEVICE
+ },
#if 0
- { VERSATILE_PCI_VIRT_MEM_BASE0, VERSATILE_PCI_MEM_BASE0, SZ_16M, MT_DEVICE },
- { VERSATILE_PCI_VIRT_MEM_BASE1, VERSATILE_PCI_MEM_BASE1, SZ_16M, MT_DEVICE },
- { VERSATILE_PCI_VIRT_MEM_BASE2, VERSATILE_PCI_MEM_BASE2, SZ_16M, MT_DEVICE },
+ {
+ .virtual = VERSATILE_PCI_VIRT_MEM_BASE0,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VERSATILE_PCI_VIRT_MEM_BASE1,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ }, {
+ .virtual = VERSATILE_PCI_VIRT_MEM_BASE2,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
+ .length = SZ_16M,
+ .type = MT_DEVICE
+ },
#endif
#endif
};
diff --git a/arch/arm/mm/consistent.c b/arch/arm/mm/consistent.c
index 26356ce4da54..82f4d5e27c54 100644
--- a/arch/arm/mm/consistent.c
+++ b/arch/arm/mm/consistent.c
@@ -75,7 +75,7 @@ static struct vm_region consistent_head = {
};
static struct vm_region *
-vm_region_alloc(struct vm_region *head, size_t size, int gfp)
+vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp)
{
unsigned long addr = head->vm_start, end = head->vm_end - size;
unsigned long flags;
@@ -133,7 +133,7 @@ static struct vm_region *vm_region_find(struct vm_region *head, unsigned long ad
#endif
static void *
-__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, int gfp,
+__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
pgprot_t prot)
{
struct page *page;
@@ -251,7 +251,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, int gfp,
* virtual and bus address for that space.
*/
void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp)
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
{
return __dma_alloc(dev, size, handle, gfp,
pgprot_noncached(pgprot_kernel));
@@ -263,7 +263,7 @@ EXPORT_SYMBOL(dma_alloc_coherent);
* dma_alloc_coherent above.
*/
void *
-dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, int gfp)
+dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
{
return __dma_alloc(dev, size, handle, gfp,
pgprot_writecombine(pgprot_kernel));
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index edffa47a4b2a..f4496813615a 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/mm/init.c
*
- * Copyright (C) 1995-2002 Russell King
+ * Copyright (C) 1995-2005 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -86,14 +86,19 @@ void show_mem(void)
printk("%d pages swap cached\n", cached);
}
-struct node_info {
- unsigned int start;
- unsigned int end;
- int bootmap_pages;
-};
+static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt)
+{
+ return pmd_offset(pgd, virt);
+}
-#define O_PFN_DOWN(x) ((x) >> PAGE_SHIFT)
-#define O_PFN_UP(x) (PAGE_ALIGN(x) >> PAGE_SHIFT)
+static inline pmd_t *pmd_off_k(unsigned long virt)
+{
+ return pmd_off(pgd_offset_k(virt), virt);
+}
+
+#define for_each_nodebank(iter,mi,no) \
+ for (iter = 0; iter < mi->nr_banks; iter++) \
+ if (mi->bank[iter].node == no)
/*
* FIXME: We really want to avoid allocating the bootmap bitmap
@@ -106,15 +111,12 @@ find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages)
{
unsigned int start_pfn, bank, bootmap_pfn;
- start_pfn = O_PFN_UP(__pa(&_end));
+ start_pfn = PAGE_ALIGN(__pa(&_end)) >> PAGE_SHIFT;
bootmap_pfn = 0;
- for (bank = 0; bank < mi->nr_banks; bank ++) {
+ for_each_nodebank(bank, mi, node) {
unsigned int start, end;
- if (mi->bank[bank].node != node)
- continue;
-
start = mi->bank[bank].start >> PAGE_SHIFT;
end = (mi->bank[bank].size +
mi->bank[bank].start) >> PAGE_SHIFT;
@@ -140,92 +142,6 @@ find_bootmap_pfn(int node, struct meminfo *mi, unsigned int bootmap_pages)
return bootmap_pfn;
}
-/*
- * Scan the memory info structure and pull out:
- * - the end of memory
- * - the number of nodes
- * - the pfn range of each node
- * - the number of bootmem bitmap pages
- */
-static unsigned int __init
-find_memend_and_nodes(struct meminfo *mi, struct node_info *np)
-{
- unsigned int i, bootmem_pages = 0, memend_pfn = 0;
-
- for (i = 0; i < MAX_NUMNODES; i++) {
- np[i].start = -1U;
- np[i].end = 0;
- np[i].bootmap_pages = 0;
- }
-
- for (i = 0; i < mi->nr_banks; i++) {
- unsigned long start, end;
- int node;
-
- if (mi->bank[i].size == 0) {
- /*
- * Mark this bank with an invalid node number
- */
- mi->bank[i].node = -1;
- continue;
- }
-
- node = mi->bank[i].node;
-
- /*
- * Make sure we haven't exceeded the maximum number of nodes
- * that we have in this configuration. If we have, we're in
- * trouble. (maybe we ought to limit, instead of bugging?)
- */
- if (node >= MAX_NUMNODES)
- BUG();
- node_set_online(node);
-
- /*
- * Get the start and end pfns for this bank
- */
- start = mi->bank[i].start >> PAGE_SHIFT;
- end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT;
-
- if (np[node].start > start)
- np[node].start = start;
-
- if (np[node].end < end)
- np[node].end = end;
-
- if (memend_pfn < end)
- memend_pfn = end;
- }
-
- /*
- * Calculate the number of pages we require to
- * store the bootmem bitmaps.
- */
- for_each_online_node(i) {
- if (np[i].end == 0)
- continue;
-
- np[i].bootmap_pages = bootmem_bootmap_pages(np[i].end -
- np[i].start);
- bootmem_pages += np[i].bootmap_pages;
- }
-
- high_memory = __va(memend_pfn << PAGE_SHIFT);
-
- /*
- * This doesn't seem to be used by the Linux memory
- * manager any more. If we can get rid of it, we
- * also get rid of some of the stuff above as well.
- *
- * Note: max_low_pfn and max_pfn reflect the number
- * of _pages_ in the system, not the maximum PFN.
- */
- max_low_pfn = memend_pfn - O_PFN_DOWN(PHYS_OFFSET);
- max_pfn = memend_pfn - O_PFN_DOWN(PHYS_OFFSET);
-
- return bootmem_pages;
-}
-
static int __init check_initrd(struct meminfo *mi)
{
int initrd_node = -2;
@@ -266,9 +182,8 @@ static int __init check_initrd(struct meminfo *mi)
/*
* Reserve the various regions of node 0
*/
-static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int bootmap_pages)
+static __init void reserve_node_zero(pg_data_t *pgdat)
{
- pg_data_t *pgdat = NODE_DATA(0);
unsigned long res_size = 0;
/*
@@ -288,13 +203,6 @@ static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int boot
reserve_bootmem_node(pgdat, __pa(swapper_pg_dir),
PTRS_PER_PGD * sizeof(pgd_t));
- /*
- * And don't forget to reserve the allocator bitmap,
- * which will be freed later.
- */
- reserve_bootmem_node(pgdat, bootmap_pfn << PAGE_SHIFT,
- bootmap_pages << PAGE_SHIFT);
-
/*
* Hmm... This should go elsewhere, but we really really need to
* stop things allocating the low memory; ideally we need a better
@@ -324,93 +232,256 @@ static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int boot
reserve_bootmem_node(pgdat, PHYS_OFFSET, res_size);
}
-/*
- * Register all available RAM in this node with the bootmem allocator.
- */
-static inline void free_bootmem_node_bank(int node, struct meminfo *mi)
+void __init build_mem_type_table(void);
+void __init create_mapping(struct map_desc *md);
+
+static unsigned long __init
+bootmem_init_node(int node, int initrd_node, struct meminfo *mi)
{
- pg_data_t *pgdat = NODE_DATA(node);
- int bank;
+ unsigned long zone_size[MAX_NR_ZONES], zhole_size[MAX_NR_ZONES];
+ unsigned long start_pfn, end_pfn, boot_pfn;
+ unsigned int boot_pages;
+ pg_data_t *pgdat;
+ int i;
- for (bank = 0; bank < mi->nr_banks; bank++)
- if (mi->bank[bank].node == node)
- free_bootmem_node(pgdat, mi->bank[bank].start,
- mi->bank[bank].size);
-}
-
-/*
- * Initialise the bootmem allocator for all nodes. This is called
- * early during the architecture specific initialisation.
- */
-static void __init bootmem_init(struct meminfo *mi)
-{
- struct node_info node_info[MAX_NUMNODES], *np = node_info;
- unsigned int bootmap_pages, bootmap_pfn, map_pg;
- int node, initrd_node;
-
- bootmap_pages = find_memend_and_nodes(mi, np);
- bootmap_pfn = find_bootmap_pfn(0, mi, bootmap_pages);
- initrd_node = check_initrd(mi);
-
- map_pg = bootmap_pfn;
+ start_pfn = -1UL;
+ end_pfn = 0;
/*
- * Initialise the bootmem nodes.
- *
- * What we really want to do is:
- *
- * unmap_all_regions_except_kernel();
- * for_each_node_in_reverse_order(node) {
- * map_node(node);
- * allocate_bootmem_map(node);
- * init_bootmem_node(node);
- * free_bootmem_node(node);
- * }
- *
- * but this is a 2.5-type change. For now, we just set
- * the nodes up in reverse order.
- *
- * (we could also do with rolling bootmem_init and paging_init
- * into one generic "memory_init" type function).
+ * Calculate the pfn range, and map the memory banks for this node.
*/
- np += num_online_nodes() - 1;
- for (node = num_online_nodes() - 1; node >= 0; node--, np--) {
- /*
- * If there are no pages in this node, ignore it.
- * Note that node 0 must always have some pages.
- */
- if (np->end == 0 || !node_online(node)) {
- if (node == 0)
- BUG();
- continue;
- }
+ for_each_nodebank(i, mi, node) {
+ unsigned long start, end;
+ struct map_desc map;
- /*
- * Initialise the bootmem allocator.
- */
- init_bootmem_node(NODE_DATA(node), map_pg, np->start, np->end);
- free_bootmem_node_bank(node, mi);
- map_pg += np->bootmap_pages;
+ start = mi->bank[i].start >> PAGE_SHIFT;
+ end = (mi->bank[i].start + mi->bank[i].size) >> PAGE_SHIFT;
- /*
- * If this is node 0, we need to reserve some areas ASAP -
- * we may use bootmem on node 0 to setup the other nodes.
- */
- if (node == 0)
- reserve_node_zero(bootmap_pfn, bootmap_pages);
+ if (start_pfn > start)
+ start_pfn = start;
+ if (end_pfn < end)
+ end_pfn = end;
+
+ map.pfn = __phys_to_pfn(mi->bank[i].start);
+ map.virtual = __phys_to_virt(mi->bank[i].start);
+ map.length = mi->bank[i].size;
+ map.type = MT_MEMORY;
+
+ create_mapping(&map);
}
+ /*
+ * If there is no memory in this node, ignore it.
+ */
+ if (end_pfn == 0)
+ return end_pfn;
+
+ /*
+ * Allocate the bootmem bitmap page.
+ */
+ boot_pages = bootmem_bootmap_pages(end_pfn - start_pfn);
+ boot_pfn = find_bootmap_pfn(node, mi, boot_pages);
+
+ /*
+ * Initialise the bootmem allocator for this node, handing the
+ * memory banks over to bootmem.
+ */
+ node_set_online(node);
+ pgdat = NODE_DATA(node);
+ init_bootmem_node(pgdat, boot_pfn, start_pfn, end_pfn);
+
+ for_each_nodebank(i, mi, node)
+ free_bootmem_node(pgdat, mi->bank[i].start, mi->bank[i].size);
+
+ /*
+ * Reserve the bootmem bitmap for this node.
+ */
+ reserve_bootmem_node(pgdat, boot_pfn << PAGE_SHIFT,
+ boot_pages << PAGE_SHIFT);
#ifdef CONFIG_BLK_DEV_INITRD
- if (phys_initrd_size && initrd_node >= 0) {
- reserve_bootmem_node(NODE_DATA(initrd_node), phys_initrd_start,
+ /*
+ * If the initrd is in this node, reserve its memory.
+ */
+ if (node == initrd_node) {
+ reserve_bootmem_node(pgdat, phys_initrd_start,
phys_initrd_size);
initrd_start = __phys_to_virt(phys_initrd_start);
initrd_end = initrd_start + phys_initrd_size;
}
#endif
- BUG_ON(map_pg != bootmap_pfn + bootmap_pages);
+ /*
+ * Finally, reserve any node zero regions.
+ */
+ if (node == 0)
+ reserve_node_zero(pgdat);
+
+ /*
+ * initialise the zones within this node.
+ */
+ memset(zone_size, 0, sizeof(zone_size));
+ memset(zhole_size, 0, sizeof(zhole_size));
+
+ /*
+ * The size of this node has already been determined. If we need
+ * to do anything fancy with the allocation of this memory to the
+ * zones, now is the time to do it.
+ */
+ zone_size[0] = end_pfn - start_pfn;
+
+ /*
+ * For each bank in this node, calculate the size of the holes.
+ * holes = node_size - sum(bank_sizes_in_node)
+ */
+ zhole_size[0] = zone_size[0];
+ for_each_nodebank(i, mi, node)
+ zhole_size[0] -= mi->bank[i].size >> PAGE_SHIFT;
+
+ /*
+ * Adjust the sizes according to any special requirements for
+ * this machine type.
+ */
+ arch_adjust_zones(node, zone_size, zhole_size);
+
+ free_area_init_node(node, pgdat, zone_size, start_pfn, zhole_size);
+
+ return end_pfn;
+}
+
+static void __init bootmem_init(struct meminfo *mi)
+{
+ unsigned long addr, memend_pfn = 0;
+ int node, initrd_node, i;
+
+ /*
+ * Invalidate the node number for empty or invalid memory banks
+ */
+ for (i = 0; i < mi->nr_banks; i++)
+ if (mi->bank[i].size == 0 || mi->bank[i].node >= MAX_NUMNODES)
+ mi->bank[i].node = -1;
+
+ memcpy(&meminfo, mi, sizeof(meminfo));
+
+#ifdef CONFIG_XIP_KERNEL
+#error needs fixing
+ p->pfn = __phys_to_pfn(CONFIG_XIP_PHYS_ADDR & PMD_MASK);
+ p->virtual = (unsigned long)&_stext & PMD_MASK;
+ p->length = ((unsigned long)&_etext - p->virtual + ~PMD_MASK) & PMD_MASK;
+ p->type = MT_ROM;
+ p ++;
+#endif
+
+ /*
+ * Clear out all the mappings below the kernel image.
+ * FIXME: what about XIP?
+ */
+ for (addr = 0; addr < PAGE_OFFSET; addr += PGDIR_SIZE)
+ pmd_clear(pmd_off_k(addr));
+
+ /*
+ * Clear out all the kernel space mappings, except for the first
+ * memory bank, up to the end of the vmalloc region.
+ */
+ for (addr = __phys_to_virt(mi->bank[0].start + mi->bank[0].size);
+ addr < VMALLOC_END; addr += PGDIR_SIZE)
+ pmd_clear(pmd_off_k(addr));
+
+ /*
+ * Locate which node contains the ramdisk image, if any.
+ */
+ initrd_node = check_initrd(mi);
+
+ /*
+ * Run through each node initialising the bootmem allocator.
+ */
+ for_each_node(node) {
+ unsigned long end_pfn;
+
+ end_pfn = bootmem_init_node(node, initrd_node, mi);
+
+ /*
+ * Remember the highest memory PFN.
+ */
+ if (end_pfn > memend_pfn)
+ memend_pfn = end_pfn;
+ }
+
+ high_memory = __va(memend_pfn << PAGE_SHIFT);
+
+ /*
+ * This doesn't seem to be used by the Linux memory manager any
+ * more, but is used by ll_rw_block. If we can get rid of it, we
+ * also get rid of some of the stuff above as well.
+ *
+ * Note: max_low_pfn and max_pfn reflect the number of _pages_ in
+ * the system, not the maximum PFN.
+ */
+ max_pfn = max_low_pfn = memend_pfn - PHYS_PFN_OFFSET;
+}
+
+/*
+ * Set up device the mappings. Since we clear out the page tables for all
+ * mappings above VMALLOC_END, we will remove any debug device mappings.
+ * This means you have to be careful how you debug this function, or any
+ * called function. (Do it by code inspection!)
+ */
+static void __init devicemaps_init(struct machine_desc *mdesc)
+{
+ struct map_desc map;
+ unsigned long addr;
+ void *vectors;
+
+ for (addr = VMALLOC_END; addr; addr += PGDIR_SIZE)
+ pmd_clear(pmd_off_k(addr));
+
+ /*
+ * Map the cache flushing regions.
+ */
+#ifdef FLUSH_BASE
+ map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS);
+ map.virtual = FLUSH_BASE;
+ map.length = PGDIR_SIZE;
+ map.type = MT_CACHECLEAN;
+ create_mapping(&map);
+#endif
+#ifdef FLUSH_BASE_MINICACHE
+ map.pfn = __phys_to_pfn(FLUSH_BASE_PHYS + PGDIR_SIZE);
+ map.virtual = FLUSH_BASE_MINICACHE;
+ map.length = PGDIR_SIZE;
+ map.type = MT_MINICLEAN;
+ create_mapping(&map);
+#endif
+
+ flush_cache_all();
+ local_flush_tlb_all();
+
+ vectors = alloc_bootmem_low_pages(PAGE_SIZE);
+ BUG_ON(!vectors);
+
+ /*
+ * Create a mapping for the machine vectors at the high-vectors
+ * location (0xffff0000). If we aren't using high-vectors, also
+ * create a mapping at the low-vectors virtual address.
+ */
+ map.pfn = __phys_to_pfn(virt_to_phys(vectors));
+ map.virtual = 0xffff0000;
+ map.length = PAGE_SIZE;
+ map.type = MT_HIGH_VECTORS;
+ create_mapping(&map);
+
+ if (!vectors_high()) {
+ map.virtual = 0;
+ map.type = MT_LOW_VECTORS;
+ create_mapping(&map);
+ }
+
+ /*
+ * Ask the machine support to map in the statically mapped devices.
+ * After this point, we can start to touch devices again.
+ */
+ if (mdesc->map_io)
+ mdesc->map_io();
}
/*
@@ -420,87 +491,17 @@ static void __init bootmem_init(struct meminfo *mi)
void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc)
{
void *zero_page;
- int node;
+ build_mem_type_table();
bootmem_init(mi);
+ devicemaps_init(mdesc);
- memcpy(&meminfo, mi, sizeof(meminfo));
+ top_pmd = pmd_off_k(0xffff0000);
/*
* allocate the zero page. Note that we count on this going ok.
*/
zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
-
- /*
- * initialise the page tables.
- */
- memtable_init(mi);
- if (mdesc->map_io)
- mdesc->map_io();
- local_flush_tlb_all();
-
- /*
- * initialise the zones within each node
- */
- for_each_online_node(node) {
- unsigned long zone_size[MAX_NR_ZONES];
- unsigned long zhole_size[MAX_NR_ZONES];
- struct bootmem_data *bdata;
- pg_data_t *pgdat;
- int i;
-
- /*
- * Initialise the zone size information.
- */
- for (i = 0; i < MAX_NR_ZONES; i++) {
- zone_size[i] = 0;
- zhole_size[i] = 0;
- }
-
- pgdat = NODE_DATA(node);
- bdata = pgdat->bdata;
-
- /*
- * The size of this node has already been determined.
- * If we need to do anything fancy with the allocation
- * of this memory to the zones, now is the time to do
- * it.
- */
- zone_size[0] = bdata->node_low_pfn -
- (bdata->node_boot_start >> PAGE_SHIFT);
-
- /*
- * If this zone has zero size, skip it.
- */
- if (!zone_size[0])
- continue;
-
- /*
- * For each bank in this node, calculate the size of the
- * holes. holes = node_size - sum(bank_sizes_in_node)
- */
- zhole_size[0] = zone_size[0];
- for (i = 0; i < mi->nr_banks; i++) {
- if (mi->bank[i].node != node)
- continue;
-
- zhole_size[0] -= mi->bank[i].size >> PAGE_SHIFT;
- }
-
- /*
- * Adjust the sizes according to any special
- * requirements for this machine type.
- */
- arch_adjust_zones(node, zone_size, zhole_size);
-
- free_area_init_node(node, pgdat, zone_size,
- bdata->node_boot_start >> PAGE_SHIFT, zhole_size);
- }
-
- /*
- * finish off the bad pages once
- * the mem_map is initialised
- */
memzero(zero_page, PAGE_SIZE);
empty_zero_page = virt_to_page(zero_page);
flush_dcache_page(empty_zero_page);
@@ -562,10 +563,7 @@ static void __init free_unused_memmap_node(int node, struct meminfo *mi)
* may not be the case, especially if the user has provided the
* information on the command line.
*/
- for (i = 0; i < mi->nr_banks; i++) {
- if (mi->bank[i].size == 0 || mi->bank[i].node != node)
- continue;
-
+ for_each_nodebank(i, mi, node) {
bank_start = mi->bank[i].start >> PAGE_SHIFT;
if (bank_start < prev_bank_end) {
printk(KERN_ERR "MEM: unordered memory banks. "
diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c
index 7110e54182b1..6fb1258df1b5 100644
--- a/arch/arm/mm/ioremap.c
+++ b/arch/arm/mm/ioremap.c
@@ -26,6 +26,7 @@
#include
#include
+#include
#include
#include
diff --git a/arch/arm/mm/mm-armv.c b/arch/arm/mm/mm-armv.c
index d125a3dc061c..61bc2fa0511e 100644
--- a/arch/arm/mm/mm-armv.c
+++ b/arch/arm/mm/mm-armv.c
@@ -1,7 +1,7 @@
/*
* linux/arch/arm/mm/mm-armv.c
*
- * Copyright (C) 1998-2002 Russell King
+ * Copyright (C) 1998-2005 Russell King
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -305,16 +305,6 @@ alloc_init_page(unsigned long virt, unsigned long phys, unsigned int prot_l1, pg
set_pte(ptep, pfn_pte(phys >> PAGE_SHIFT, prot));
}
-/*
- * Clear any PGD mapping. On a two-level page table system,
- * the clearance is done by the middle-level functions (pmd)
- * rather than the top-level (pgd) functions.
- */
-static inline void clear_mapping(unsigned long virt)
-{
- pmd_clear(pmd_off_k(virt));
-}
-
struct mem_types {
unsigned int prot_pte;
unsigned int prot_l1;
@@ -373,7 +363,7 @@ static struct mem_types mem_types[] __initdata = {
/*
* Adjust the PMD section entries according to the CPU in use.
*/
-static void __init build_mem_type_table(void)
+void __init build_mem_type_table(void)
{
struct cachepolicy *cp;
unsigned int cr = get_cr();
@@ -483,25 +473,25 @@ static void __init build_mem_type_table(void)
* offsets, and we take full advantage of sections and
* supersections.
*/
-static void __init create_mapping(struct map_desc *md)
+void __init create_mapping(struct map_desc *md)
{
unsigned long virt, length;
int prot_sect, prot_l1, domain;
pgprot_t prot_pte;
- long off;
+ unsigned long off = (u32)__pfn_to_phys(md->pfn);
if (md->virtual != vectors_base() && md->virtual < TASK_SIZE) {
printk(KERN_WARNING "BUG: not creating mapping for "
- "0x%08lx at 0x%08lx in user region\n",
- md->physical, md->virtual);
+ "0x%016llx at 0x%08lx in user region\n",
+ __pfn_to_phys((u64)md->pfn), md->virtual);
return;
}
if ((md->type == MT_DEVICE || md->type == MT_ROM) &&
md->virtual >= PAGE_OFFSET && md->virtual < VMALLOC_END) {
- printk(KERN_WARNING "BUG: mapping for 0x%08lx at 0x%08lx "
+ printk(KERN_WARNING "BUG: mapping for 0x%016llx at 0x%08lx "
"overlaps vmalloc space\n",
- md->physical, md->virtual);
+ __pfn_to_phys((u64)md->pfn), md->virtual);
}
domain = mem_types[md->type].domain;
@@ -509,15 +499,40 @@ static void __init create_mapping(struct map_desc *md)
prot_l1 = mem_types[md->type].prot_l1 | PMD_DOMAIN(domain);
prot_sect = mem_types[md->type].prot_sect | PMD_DOMAIN(domain);
+ /*
+ * Catch 36-bit addresses
+ */
+ if(md->pfn >= 0x100000) {
+ if(domain) {
+ printk(KERN_ERR "MM: invalid domain in supersection "
+ "mapping for 0x%016llx at 0x%08lx\n",
+ __pfn_to_phys((u64)md->pfn), md->virtual);
+ return;
+ }
+ if((md->virtual | md->length | __pfn_to_phys(md->pfn))
+ & ~SUPERSECTION_MASK) {
+ printk(KERN_ERR "MM: cannot create mapping for "
+ "0x%016llx at 0x%08lx invalid alignment\n",
+ __pfn_to_phys((u64)md->pfn), md->virtual);
+ return;
+ }
+
+ /*
+ * Shift bits [35:32] of address into bits [23:20] of PMD
+ * (See ARMv6 spec).
+ */
+ off |= (((md->pfn >> (32 - PAGE_SHIFT)) & 0xF) << 20);
+ }
+
virt = md->virtual;
- off = md->physical - virt;
+ off -= virt;
length = md->length;
if (mem_types[md->type].prot_l1 == 0 &&
(virt & 0xfffff || (virt + off) & 0xfffff || (virt + length) & 0xfffff)) {
printk(KERN_WARNING "BUG: map for 0x%08lx at 0x%08lx can not "
"be mapped using pages, ignoring.\n",
- md->physical, md->virtual);
+ __pfn_to_phys(md->pfn), md->virtual);
return;
}
@@ -535,13 +550,22 @@ static void __init create_mapping(struct map_desc *md)
* of the actual domain assignments in use.
*/
if (cpu_architecture() >= CPU_ARCH_ARMv6 && domain == 0) {
- /* Align to supersection boundary */
- while ((virt & ~SUPERSECTION_MASK || (virt + off) &
- ~SUPERSECTION_MASK) && length >= (PGDIR_SIZE / 2)) {
- alloc_init_section(virt, virt + off, prot_sect);
+ /*
+ * Align to supersection boundary if !high pages.
+ * High pages have already been checked for proper
+ * alignment above and they will fail the SUPSERSECTION_MASK
+ * check because of the way the address is encoded into
+ * offset.
+ */
+ if (md->pfn <= 0x100000) {
+ while ((virt & ~SUPERSECTION_MASK ||
+ (virt + off) & ~SUPERSECTION_MASK) &&
+ length >= (PGDIR_SIZE / 2)) {
+ alloc_init_section(virt, virt + off, prot_sect);
- virt += (PGDIR_SIZE / 2);
- length -= (PGDIR_SIZE / 2);
+ virt += (PGDIR_SIZE / 2);
+ length -= (PGDIR_SIZE / 2);
+ }
}
while (length >= SUPERSECTION_SIZE) {
@@ -601,100 +625,6 @@ void setup_mm_for_reboot(char mode)
}
}
-extern void _stext, _etext;
-
-/*
- * Setup initial mappings. We use the page we allocated for zero page to hold
- * the mappings, which will get overwritten by the vectors in traps_init().
- * The mappings must be in virtual address order.
- */
-void __init memtable_init(struct meminfo *mi)
-{
- struct map_desc *init_maps, *p, *q;
- unsigned long address = 0;
- int i;
-
- build_mem_type_table();
-
- init_maps = p = alloc_bootmem_low_pages(PAGE_SIZE);
-
-#ifdef CONFIG_XIP_KERNEL
- p->physical = CONFIG_XIP_PHYS_ADDR & PMD_MASK;
- p->virtual = (unsigned long)&_stext & PMD_MASK;
- p->length = ((unsigned long)&_etext - p->virtual + ~PMD_MASK) & PMD_MASK;
- p->type = MT_ROM;
- p ++;
-#endif
-
- for (i = 0; i < mi->nr_banks; i++) {
- if (mi->bank[i].size == 0)
- continue;
-
- p->physical = mi->bank[i].start;
- p->virtual = __phys_to_virt(p->physical);
- p->length = mi->bank[i].size;
- p->type = MT_MEMORY;
- p ++;
- }
-
-#ifdef FLUSH_BASE
- p->physical = FLUSH_BASE_PHYS;
- p->virtual = FLUSH_BASE;
- p->length = PGDIR_SIZE;
- p->type = MT_CACHECLEAN;
- p ++;
-#endif
-
-#ifdef FLUSH_BASE_MINICACHE
- p->physical = FLUSH_BASE_PHYS + PGDIR_SIZE;
- p->virtual = FLUSH_BASE_MINICACHE;
- p->length = PGDIR_SIZE;
- p->type = MT_MINICLEAN;
- p ++;
-#endif
-
- /*
- * Go through the initial mappings, but clear out any
- * pgdir entries that are not in the description.
- */
- q = init_maps;
- do {
- if (address < q->virtual || q == p) {
- clear_mapping(address);
- address += PGDIR_SIZE;
- } else {
- create_mapping(q);
-
- address = q->virtual + q->length;
- address = (address + PGDIR_SIZE - 1) & PGDIR_MASK;
-
- q ++;
- }
- } while (address != 0);
-
- /*
- * Create a mapping for the machine vectors at the high-vectors
- * location (0xffff0000). If we aren't using high-vectors, also
- * create a mapping at the low-vectors virtual address.
- */
- init_maps->physical = virt_to_phys(init_maps);
- init_maps->virtual = 0xffff0000;
- init_maps->length = PAGE_SIZE;
- init_maps->type = MT_HIGH_VECTORS;
- create_mapping(init_maps);
-
- if (!vectors_high()) {
- init_maps->virtual = 0;
- init_maps->type = MT_LOW_VECTORS;
- create_mapping(init_maps);
- }
-
- flush_cache_all();
- local_flush_tlb_all();
-
- top_pmd = pmd_off_k(0xffff0000);
-}
-
/*
* Create the architecture specific mappings
*/
diff --git a/arch/arm/oprofile/Makefile b/arch/arm/oprofile/Makefile
index 8ffb523e6c77..6a94e54848fd 100644
--- a/arch/arm/oprofile/Makefile
+++ b/arch/arm/oprofile/Makefile
@@ -6,6 +6,6 @@ DRIVER_OBJS = $(addprefix ../../../drivers/oprofile/, \
oprofilefs.o oprofile_stats.o \
timer_int.o )
-oprofile-y := $(DRIVER_OBJS) init.o backtrace.o
-oprofile-$(CONFIG_CPU_XSCALE) += common.o op_model_xscale.o
+oprofile-y := $(DRIVER_OBJS) common.o backtrace.o
+oprofile-$(CONFIG_CPU_XSCALE) += op_model_xscale.o
diff --git a/arch/arm/oprofile/common.c b/arch/arm/oprofile/common.c
index e57dde882898..1415930ceee1 100644
--- a/arch/arm/oprofile/common.c
+++ b/arch/arm/oprofile/common.c
@@ -10,40 +10,94 @@
#include
#include
#include
-#include
#include
+#include
#include "op_counter.h"
#include "op_arm_model.h"
-static struct op_arm_model_spec *pmu_model;
-static int pmu_enabled;
-static struct semaphore pmu_sem;
+static struct op_arm_model_spec *op_arm_model;
+static int op_arm_enabled;
+static struct semaphore op_arm_sem;
-static int pmu_start(void);
-static int pmu_setup(void);
-static void pmu_stop(void);
-static int pmu_create_files(struct super_block *, struct dentry *);
+struct op_counter_config counter_config[OP_MAX_COUNTER];
-#ifdef CONFIG_PM
-static int pmu_suspend(struct sys_device *dev, pm_message_t state)
+static int op_arm_create_files(struct super_block *sb, struct dentry *root)
{
- if (pmu_enabled)
- pmu_stop();
+ unsigned int i;
+
+ for (i = 0; i < op_arm_model->num_counters; i++) {
+ struct dentry *dir;
+ char buf[2];
+
+ snprintf(buf, sizeof buf, "%d", i);
+ dir = oprofilefs_mkdir(sb, root, buf);
+ oprofilefs_create_ulong(sb, dir, "enabled", &counter_config[i].enabled);
+ oprofilefs_create_ulong(sb, dir, "event", &counter_config[i].event);
+ oprofilefs_create_ulong(sb, dir, "count", &counter_config[i].count);
+ oprofilefs_create_ulong(sb, dir, "unit_mask", &counter_config[i].unit_mask);
+ oprofilefs_create_ulong(sb, dir, "kernel", &counter_config[i].kernel);
+ oprofilefs_create_ulong(sb, dir, "user", &counter_config[i].user);
+ }
+
return 0;
}
-static int pmu_resume(struct sys_device *dev)
+static int op_arm_setup(void)
{
- if (pmu_enabled)
- pmu_start();
+ int ret;
+
+ spin_lock(&oprofilefs_lock);
+ ret = op_arm_model->setup_ctrs();
+ spin_unlock(&oprofilefs_lock);
+ return ret;
+}
+
+static int op_arm_start(void)
+{
+ int ret = -EBUSY;
+
+ down(&op_arm_sem);
+ if (!op_arm_enabled) {
+ ret = op_arm_model->start();
+ op_arm_enabled = !ret;
+ }
+ up(&op_arm_sem);
+ return ret;
+}
+
+static void op_arm_stop(void)
+{
+ down(&op_arm_sem);
+ if (op_arm_enabled)
+ op_arm_model->stop();
+ op_arm_enabled = 0;
+ up(&op_arm_sem);
+}
+
+#ifdef CONFIG_PM
+static int op_arm_suspend(struct sys_device *dev, pm_message_t state)
+{
+ down(&op_arm_sem);
+ if (op_arm_enabled)
+ op_arm_model->stop();
+ up(&op_arm_sem);
+ return 0;
+}
+
+static int op_arm_resume(struct sys_device *dev)
+{
+ down(&op_arm_sem);
+ if (op_arm_enabled && op_arm_model->start())
+ op_arm_enabled = 0;
+ up(&op_arm_sem);
return 0;
}
static struct sysdev_class oprofile_sysclass = {
set_kset_name("oprofile"),
- .resume = pmu_resume,
- .suspend = pmu_suspend,
+ .resume = op_arm_resume,
+ .suspend = op_arm_suspend,
};
static struct sys_device device_oprofile = {
@@ -71,86 +125,41 @@ static void exit_driverfs(void)
#define exit_driverfs() do { } while (0)
#endif /* CONFIG_PM */
-struct op_counter_config counter_config[OP_MAX_COUNTER];
-
-static int pmu_create_files(struct super_block *sb, struct dentry *root)
+int __init oprofile_arch_init(struct oprofile_operations *ops)
{
- unsigned int i;
+ struct op_arm_model_spec *spec = NULL;
+ int ret = -ENODEV;
- for (i = 0; i < pmu_model->num_counters; i++) {
- struct dentry *dir;
- char buf[2];
+#ifdef CONFIG_CPU_XSCALE
+ spec = &op_xscale_spec;
+#endif
- snprintf(buf, sizeof buf, "%d", i);
- dir = oprofilefs_mkdir(sb, root, buf);
- oprofilefs_create_ulong(sb, dir, "enabled", &counter_config[i].enabled);
- oprofilefs_create_ulong(sb, dir, "event", &counter_config[i].event);
- oprofilefs_create_ulong(sb, dir, "count", &counter_config[i].count);
- oprofilefs_create_ulong(sb, dir, "unit_mask", &counter_config[i].unit_mask);
- oprofilefs_create_ulong(sb, dir, "kernel", &counter_config[i].kernel);
- oprofilefs_create_ulong(sb, dir, "user", &counter_config[i].user);
+ if (spec) {
+ init_MUTEX(&op_arm_sem);
+
+ if (spec->init() < 0)
+ return -ENODEV;
+
+ op_arm_model = spec;
+ init_driverfs();
+ ops->create_files = op_arm_create_files;
+ ops->setup = op_arm_setup;
+ ops->shutdown = op_arm_stop;
+ ops->start = op_arm_start;
+ ops->stop = op_arm_stop;
+ ops->cpu_type = op_arm_model->name;
+ ops->backtrace = arm_backtrace;
+ printk(KERN_INFO "oprofile: using %s\n", spec->name);
}
- return 0;
-}
-
-static int pmu_setup(void)
-{
- int ret;
-
- spin_lock(&oprofilefs_lock);
- ret = pmu_model->setup_ctrs();
- spin_unlock(&oprofilefs_lock);
return ret;
}
-static int pmu_start(void)
+void oprofile_arch_exit(void)
{
- int ret = -EBUSY;
-
- down(&pmu_sem);
- if (!pmu_enabled) {
- ret = pmu_model->start();
- pmu_enabled = !ret;
- }
- up(&pmu_sem);
- return ret;
-}
-
-static void pmu_stop(void)
-{
- down(&pmu_sem);
- if (pmu_enabled)
- pmu_model->stop();
- pmu_enabled = 0;
- up(&pmu_sem);
-}
-
-int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec)
-{
- init_MUTEX(&pmu_sem);
-
- if (spec->init() < 0)
- return -ENODEV;
-
- pmu_model = spec;
- init_driverfs();
- ops->create_files = pmu_create_files;
- ops->setup = pmu_setup;
- ops->shutdown = pmu_stop;
- ops->start = pmu_start;
- ops->stop = pmu_stop;
- ops->cpu_type = pmu_model->name;
- printk(KERN_INFO "oprofile: using %s PMU\n", spec->name);
-
- return 0;
-}
-
-void pmu_exit(void)
-{
- if (pmu_model) {
+ if (op_arm_model) {
exit_driverfs();
- pmu_model = NULL;
+ op_arm_model = NULL;
}
}
diff --git a/arch/arm/oprofile/init.c b/arch/arm/oprofile/init.c
deleted file mode 100644
index d315a3a86c86..000000000000
--- a/arch/arm/oprofile/init.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/**
- * @file init.c
- *
- * @remark Copyright 2004 Oprofile Authors
- * @remark Read the file COPYING
- *
- * @author Zwane Mwaikambo
- */
-
-#include
-#include
-#include
-#include "op_arm_model.h"
-
-int __init oprofile_arch_init(struct oprofile_operations *ops)
-{
- int ret = -ENODEV;
-
-#ifdef CONFIG_CPU_XSCALE
- ret = pmu_init(ops, &op_xscale_spec);
-#endif
-
- ops->backtrace = arm_backtrace;
-
- return ret;
-}
-
-void oprofile_arch_exit(void)
-{
-#ifdef CONFIG_CPU_XSCALE
- pmu_exit();
-#endif
-}
diff --git a/arch/arm/oprofile/op_arm_model.h b/arch/arm/oprofile/op_arm_model.h
index 2148d07484b7..38c6ad158547 100644
--- a/arch/arm/oprofile/op_arm_model.h
+++ b/arch/arm/oprofile/op_arm_model.h
@@ -26,6 +26,6 @@ extern struct op_arm_model_spec op_xscale_spec;
extern void arm_backtrace(struct pt_regs * const regs, unsigned int depth);
-extern int __init pmu_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
-extern void pmu_exit(void);
+extern int __init op_arm_init(struct oprofile_operations *ops, struct op_arm_model_spec *spec);
+extern void op_arm_exit(void);
#endif /* OP_ARM_MODEL_H */
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 7719a4062e3a..7ad69f14a3e7 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -59,7 +59,11 @@ void __init omap_detect_sram(void)
}
static struct map_desc omap_sram_io_desc[] __initdata = {
- { OMAP1_SRAM_BASE, OMAP1_SRAM_START, 0, MT_DEVICE }
+ { /* .length gets filled in at runtime */
+ .virtual = OMAP1_SRAM_BASE,
+ .pfn = __phys_to_pfn(OMAP1_SRAM_START),
+ .type = MT_DEVICE
+ }
};
/*
diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c
index 819895cf0b9e..2082a9647f4f 100644
--- a/arch/frv/mb93090-mb00/pci-dma-nommu.c
+++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c
@@ -33,7 +33,7 @@ struct dma_alloc_record {
static DEFINE_SPINLOCK(dma_alloc_lock);
static LIST_HEAD(dma_alloc_list);
-void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, int gfp)
+void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp)
{
struct dma_alloc_record *new;
struct list_head *this = &dma_alloc_list;
diff --git a/arch/frv/mb93090-mb00/pci-dma.c b/arch/frv/mb93090-mb00/pci-dma.c
index 27eb12066507..86fbdadc51b6 100644
--- a/arch/frv/mb93090-mb00/pci-dma.c
+++ b/arch/frv/mb93090-mb00/pci-dma.c
@@ -17,7 +17,7 @@
#include
#include
-void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, int gfp)
+void *dma_alloc_coherent(struct device *hwdev, size_t size, dma_addr_t *dma_handle, gfp_t gfp)
{
void *ret;
diff --git a/arch/frv/mm/dma-alloc.c b/arch/frv/mm/dma-alloc.c
index 4b38d45435f6..cfc4f97490c6 100644
--- a/arch/frv/mm/dma-alloc.c
+++ b/arch/frv/mm/dma-alloc.c
@@ -81,7 +81,7 @@ static int map_page(unsigned long va, unsigned long pa, pgprot_t prot)
* portions of the kernel with single large page TLB entries, and
* still get unique uncached pages for consistent DMA.
*/
-void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle)
+void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *dma_handle)
{
struct vm_struct *area;
unsigned long page, va, pa;
diff --git a/arch/i386/kernel/cpuid.c b/arch/i386/kernel/cpuid.c
index 4647db4ad6de..13bae799e626 100644
--- a/arch/i386/kernel/cpuid.c
+++ b/arch/i386/kernel/cpuid.c
@@ -163,7 +163,7 @@ static int cpuid_class_device_create(int i)
int err = 0;
struct class_device *class_err;
- class_err = class_device_create(cpuid_class, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i);
+ class_err = class_device_create(cpuid_class, NULL, MKDEV(CPUID_MAJOR, i), NULL, "cpu%d",i);
if (IS_ERR(class_err))
err = PTR_ERR(class_err);
return err;
diff --git a/arch/i386/kernel/msr.c b/arch/i386/kernel/msr.c
index 03100d6fc5d6..44470fea4309 100644
--- a/arch/i386/kernel/msr.c
+++ b/arch/i386/kernel/msr.c
@@ -246,7 +246,7 @@ static int msr_class_device_create(int i)
int err = 0;
struct class_device *class_err;
- class_err = class_device_create(msr_class, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i);
+ class_err = class_device_create(msr_class, NULL, MKDEV(MSR_MAJOR, i), NULL, "msr%d",i);
if (IS_ERR(class_err))
err = PTR_ERR(class_err);
return err;
diff --git a/arch/ia64/hp/common/hwsw_iommu.c b/arch/ia64/hp/common/hwsw_iommu.c
index 80f8ef013939..1ba02baf2f94 100644
--- a/arch/ia64/hp/common/hwsw_iommu.c
+++ b/arch/ia64/hp/common/hwsw_iommu.c
@@ -71,7 +71,7 @@ hwsw_init (void)
}
void *
-hwsw_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flags)
+hwsw_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags)
{
if (use_swiotlb(dev))
return swiotlb_alloc_coherent(dev, size, dma_handle, flags);
diff --git a/arch/ia64/hp/common/sba_iommu.c b/arch/ia64/hp/common/sba_iommu.c
index 11957598a8b9..21bffba78b6d 100644
--- a/arch/ia64/hp/common/sba_iommu.c
+++ b/arch/ia64/hp/common/sba_iommu.c
@@ -1076,7 +1076,7 @@ void sba_unmap_single(struct device *dev, dma_addr_t iova, size_t size, int dir)
* See Documentation/DMA-mapping.txt
*/
void *
-sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flags)
+sba_alloc_coherent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flags)
{
struct ioc *ioc;
void *addr;
diff --git a/arch/ia64/lib/swiotlb.c b/arch/ia64/lib/swiotlb.c
index a604efc7f6c9..3ebbb3c8ba36 100644
--- a/arch/ia64/lib/swiotlb.c
+++ b/arch/ia64/lib/swiotlb.c
@@ -314,7 +314,7 @@ sync_single(struct device *hwdev, char *dma_addr, size_t size, int dir)
void *
swiotlb_alloc_coherent(struct device *hwdev, size_t size,
- dma_addr_t *dma_handle, int flags)
+ dma_addr_t *dma_handle, gfp_t flags)
{
unsigned long dev_addr;
void *ret;
diff --git a/arch/ia64/sn/kernel/xpc.h b/arch/ia64/sn/kernel/xpc.h
index d0ee635daf2e..e5f5a4e51f70 100644
--- a/arch/ia64/sn/kernel/xpc.h
+++ b/arch/ia64/sn/kernel/xpc.h
@@ -939,7 +939,7 @@ xpc_map_bte_errors(bte_result_t error)
static inline void *
-xpc_kmalloc_cacheline_aligned(size_t size, int flags, void **base)
+xpc_kmalloc_cacheline_aligned(size_t size, gfp_t flags, void **base)
{
/* see if kmalloc will give us cachline aligned memory by default */
*base = kmalloc(size, flags);
diff --git a/arch/ia64/sn/pci/pci_dma.c b/arch/ia64/sn/pci/pci_dma.c
index 0e4b9ad9ef02..75e6e874bebf 100644
--- a/arch/ia64/sn/pci/pci_dma.c
+++ b/arch/ia64/sn/pci/pci_dma.c
@@ -75,7 +75,7 @@ EXPORT_SYMBOL(sn_dma_set_mask);
* more information.
*/
void *sn_dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int flags)
+ dma_addr_t * dma_handle, gfp_t flags)
{
void *cpuaddr;
unsigned long phys_addr;
diff --git a/arch/mips/mm/dma-coherent.c b/arch/mips/mm/dma-coherent.c
index 97a50d38c98f..a617f8c327e8 100644
--- a/arch/mips/mm/dma-coherent.c
+++ b/arch/mips/mm/dma-coherent.c
@@ -18,7 +18,7 @@
#include
void *dma_alloc_noncoherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int gfp)
+ dma_addr_t * dma_handle, gfp_t gfp)
{
void *ret;
/* ignore region specifiers */
@@ -39,7 +39,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size,
EXPORT_SYMBOL(dma_alloc_noncoherent);
void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int gfp)
+ dma_addr_t * dma_handle, gfp_t gfp)
__attribute__((alias("dma_alloc_noncoherent")));
EXPORT_SYMBOL(dma_alloc_coherent);
diff --git a/arch/mips/mm/dma-ip27.c b/arch/mips/mm/dma-ip27.c
index aa7c94b5d781..8da19fd22ac6 100644
--- a/arch/mips/mm/dma-ip27.c
+++ b/arch/mips/mm/dma-ip27.c
@@ -22,7 +22,7 @@
pdev_to_baddr(to_pci_dev(dev), (addr))
void *dma_alloc_noncoherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int gfp)
+ dma_addr_t * dma_handle, gfp_t gfp)
{
void *ret;
@@ -44,7 +44,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size,
EXPORT_SYMBOL(dma_alloc_noncoherent);
void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int gfp)
+ dma_addr_t * dma_handle, gfp_t gfp)
__attribute__((alias("dma_alloc_noncoherent")));
EXPORT_SYMBOL(dma_alloc_coherent);
diff --git a/arch/mips/mm/dma-ip32.c b/arch/mips/mm/dma-ip32.c
index 2cbe196c35fb..a7e3072ff78d 100644
--- a/arch/mips/mm/dma-ip32.c
+++ b/arch/mips/mm/dma-ip32.c
@@ -37,7 +37,7 @@
#define RAM_OFFSET_MASK 0x3fffffff
void *dma_alloc_noncoherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int gfp)
+ dma_addr_t * dma_handle, gfp_t gfp)
{
void *ret;
/* ignore region specifiers */
@@ -61,7 +61,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size,
EXPORT_SYMBOL(dma_alloc_noncoherent);
void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int gfp)
+ dma_addr_t * dma_handle, gfp_t gfp)
{
void *ret;
diff --git a/arch/mips/mm/dma-noncoherent.c b/arch/mips/mm/dma-noncoherent.c
index 59e54f12212e..4ce02028a292 100644
--- a/arch/mips/mm/dma-noncoherent.c
+++ b/arch/mips/mm/dma-noncoherent.c
@@ -24,7 +24,7 @@
*/
void *dma_alloc_noncoherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int gfp)
+ dma_addr_t * dma_handle, gfp_t gfp)
{
void *ret;
/* ignore region specifiers */
@@ -45,7 +45,7 @@ void *dma_alloc_noncoherent(struct device *dev, size_t size,
EXPORT_SYMBOL(dma_alloc_noncoherent);
void *dma_alloc_coherent(struct device *dev, size_t size,
- dma_addr_t * dma_handle, int gfp)
+ dma_addr_t * dma_handle, gfp_t gfp)
{
void *ret;
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 0b07922a2ac6..874a283edb95 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -47,10 +47,10 @@ config PM
config ISA_DMA_API
bool
- default y
config ARCH_MAY_HAVE_PC_FDC
bool
+ depends on BROKEN
default y
source "init/Kconfig"
@@ -154,13 +154,14 @@ config HOTPLUG_CPU
config ARCH_DISCONTIGMEM_ENABLE
bool "Discontiguous memory support (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ depends on 64BIT && EXPERIMENTAL
help
Say Y to support efficient handling of discontiguous physical memory,
for architectures which are either NUMA (Non-Uniform Memory Access)
or have huge holes in the physical address space for other reasons.
See for more.
+source "kernel/Kconfig.hz"
source "mm/Kconfig"
config PREEMPT
diff --git a/arch/parisc/Makefile b/arch/parisc/Makefile
index 3b339b1cce13..9b7e42490dd1 100644
--- a/arch/parisc/Makefile
+++ b/arch/parisc/Makefile
@@ -20,7 +20,8 @@ NM = sh $(srctree)/arch/parisc/nm
CHECKFLAGS += -D__hppa__=1
ifdef CONFIG_64BIT
-CROSS_COMPILE := hppa64-linux-
+CROSS_COMPILE := $(shell if [ -x /usr/bin/hppa64-linux-gnu-gcc ]; then \
+ echo hppa64-linux-gnu-; else echo hppa64-linux-; fi)
UTS_MACHINE := parisc64
CHECKFLAGS += -D__LP64__=1 -m64
else
@@ -34,6 +35,14 @@ FINAL_LD=$(CROSS_COMPILE)ld --warn-common --warn-section-align
OBJCOPY_FLAGS =-O binary -R .note -R .comment -S
+GCC_VERSION := $(call cc-version)
+ifneq ($(shell if [ -z $(GCC_VERSION) ] ; then echo "bad"; fi ;),)
+$(error Sorry, couldn't find ($(cc-version)).)
+endif
+ifneq ($(shell if [ $(GCC_VERSION) -lt 0303 ] ; then echo "bad"; fi ;),)
+$(error Sorry, your compiler is too old ($(GCC_VERSION)). GCC v3.3 or above is required.)
+endif
+
cflags-y := -pipe
# These flags should be implied by an hppa-linux configuration, but they
@@ -43,7 +52,7 @@ cflags-y += -mno-space-regs -mfast-indirect-calls
# Currently we save and restore fpregs on all kernel entry/interruption paths.
# If that gets optimized, we might need to disable the use of fpregs in the
# kernel.
-#cflags-y += -mdisable-fpregs
+cflags-y += -mdisable-fpregs
# Without this, "ld -r" results in .text sections that are too big
# (> 0x40000) for branches to reach stubs.
diff --git a/arch/parisc/configs/712_defconfig b/arch/parisc/configs/712_defconfig
index 6efaa9293eef..3e013f55df64 100644
--- a/arch/parisc/configs/712_defconfig
+++ b/arch/parisc/configs/712_defconfig
@@ -1,12 +1,16 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-pa5
-# Wed Jan 5 13:20:32 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:04:34 2005
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
@@ -15,35 +19,40 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -65,9 +74,18 @@ CONFIG_PA7100LC=y
# CONFIG_PA7300LC is not set
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
-# CONFIG_64BIT is not set
# CONFIG_SMP is not set
-# CONFIG_DISCONTIGMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
# CONFIG_HPUX is not set
@@ -81,8 +99,6 @@ CONFIG_GSC_LASI=y
# CONFIG_GSC_WAX is not set
# CONFIG_EISA is not set
# CONFIG_PCI is not set
-CONFIG_CHASSIS_LCD_LED=y
-# CONFIG_PDC_CHASSIS is not set
#
# PCCARD (PCMCIA/CardBus) support
@@ -90,12 +106,15 @@ CONFIG_CHASSIS_LCD_LED=y
# CONFIG_PCCARD is not set
#
-# PC-card bridges
+# PCI Hotplug Support
#
#
-# PCI Hotplug Support
+# PA-RISC specific drivers
#
+CONFIG_CHASSIS_LCD_LED=y
+# CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_STABLE=y
#
# Executable file formats
@@ -104,137 +123,7 @@ CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_FW_LOADER=y
-# CONFIG_DEBUG_DRIVER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-# CONFIG_MTD is not set
-
-#
-# Parallel port support
-#
-CONFIG_PARPORT=y
-CONFIG_PARPORT_PC=m
-CONFIG_PARPORT_PC_CML1=m
-# CONFIG_PARPORT_PC_FIFO is not set
-# CONFIG_PARPORT_PC_SUPERIO is not set
-CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_OTHER is not set
-# CONFIG_PARPORT_1284 is not set
-
-#
-# Plug and Play support
-#
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_PARIDE is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=y
-# CONFIG_BLK_DEV_NBD is not set
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=6144
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
-# CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-CONFIG_SCSI=y
-CONFIG_SCSI_PROC_FS=y
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-# CONFIG_CHR_DEV_OSST is not set
-CONFIG_BLK_DEV_SR=y
-# CONFIG_BLK_DEV_SR_VENDOR is not set
-CONFIG_CHR_DEV_SG=y
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-
-#
-# SCSI Transport Attributes
-#
-CONFIG_SCSI_SPI_ATTRS=y
-# CONFIG_SCSI_FC_ATTRS is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_PPA is not set
-# CONFIG_SCSI_IMM is not set
-CONFIG_SCSI_LASI700=y
-CONFIG_53C700_MEM_MAPPED=y
-CONFIG_53C700_LE_ON_BE=y
-# CONFIG_SCSI_ZALON is not set
-CONFIG_SCSI_DEBUG=m
-
-#
-# Multi-device support (RAID and LVM)
-#
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-# CONFIG_MD_RAID10 is not set
-# CONFIG_MD_RAID5 is not set
-# CONFIG_MD_RAID6 is not set
-# CONFIG_MD_MULTIPATH is not set
-# CONFIG_MD_FAULTY is not set
-# CONFIG_BLK_DEV_DM is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-
-#
-# Networking support
+# Networking
#
CONFIG_NET=y
@@ -243,12 +132,14 @@ CONFIG_NET=y
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
@@ -262,8 +153,10 @@ CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_IPCOMP is not set
CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
#
# IP: Virtual Server Configuration
@@ -272,6 +165,7 @@ CONFIG_IP_TCPDIAG=y
# CONFIG_IPV6 is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
#
# IP: Netfilter Configuration
@@ -279,11 +173,14 @@ CONFIG_NETFILTER=y
CONFIG_IP_NF_CONNTRACK=m
# CONFIG_IP_NF_CT_ACCT is not set
CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
@@ -307,21 +204,23 @@ CONFIG_IP_NF_MATCH_OWNER=m
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
# CONFIG_IP_NF_MATCH_REALM is not set
CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
CONFIG_IP_NF_MATCH_COMMENT=m
CONFIG_IP_NF_MATCH_CONNMARK=m
CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
-# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
@@ -333,6 +232,7 @@ CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
CONFIG_IP_NF_TARGET_CONNMARK=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
@@ -340,10 +240,11 @@ CONFIG_IP_NF_TARGET_NOTRACK=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
-# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
-# CONFIG_IP_NF_COMPAT_IPFWADM is not set
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
#
# SCTP Configuration (EXPERIMENTAL)
@@ -362,10 +263,6 @@ CONFIG_LLC2=m
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
@@ -373,17 +270,162 @@ CONFIG_LLC2=m
# Network testing
#
CONFIG_NET_PKTGEN=m
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_FW_LOADER=y
+# CONFIG_DEBUG_DRIVER is not set
+
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
+#
+# Memory Technology Devices (MTD)
+#
+# CONFIG_MTD is not set
+
+#
+# Parallel port support
+#
+CONFIG_PARPORT=y
+CONFIG_PARPORT_PC=m
+# CONFIG_PARPORT_PC_FIFO is not set
+# CONFIG_PARPORT_PC_SUPERIO is not set
+CONFIG_PARPORT_GSC=y
+# CONFIG_PARPORT_1284 is not set
+
+#
+# Plug and Play support
+#
+
+#
+# Block devices
+#
+# CONFIG_BLK_DEV_FD is not set
+# CONFIG_PARIDE is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=6144
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
+
+#
+# ATA/ATAPI/MFM/RLL support
+#
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+# CONFIG_BLK_DEV_SR_VENDOR is not set
+CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_SCSI_SATA is not set
+# CONFIG_SCSI_PPA is not set
+# CONFIG_SCSI_IMM is not set
+CONFIG_SCSI_LASI700=y
+CONFIG_53C700_LE_ON_BE=y
+# CONFIG_SCSI_ZALON is not set
+CONFIG_SCSI_DEBUG=m
+
+#
+# Multi-device support (RAID and LVM)
+#
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+# CONFIG_MD_RAID10 is not set
+# CONFIG_MD_RAID5 is not set
+# CONFIG_MD_RAID6 is not set
+# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
+# CONFIG_BLK_DEV_DM is not set
+
+#
+# Fusion MPT device support
+#
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
+# I2O device support
+#
+
+#
+# Network device support
+#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
@@ -391,6 +433,7 @@ CONFIG_TUN=m
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
CONFIG_LASI_82596=y
+# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
@@ -414,6 +457,7 @@ CONFIG_NET_RADIO=y
#
# CONFIG_STRIP is not set
# CONFIG_ATMEL is not set
+# CONFIG_HOSTAP is not set
#
# Wan interfaces
@@ -431,6 +475,8 @@ CONFIG_PPPOE=m
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -459,19 +505,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_GSCPS2=y
-CONFIG_HP_SDC=y
-CONFIG_HIL_MLC=y
-# CONFIG_SERIO_RAW is not set
-
#
# Input Device Drivers
#
@@ -483,6 +516,7 @@ CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_HIL_OLD=y
# CONFIG_KEYBOARD_HIL is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
@@ -493,6 +527,19 @@ CONFIG_MOUSE_HIL=m
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_GSCPS2=y
+CONFIG_HP_SDC=y
+CONFIG_HIL_MLC=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
#
# Character devices
#
@@ -511,7 +558,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -546,11 +592,13 @@ CONFIG_GEN_RTC_X=y
#
# Ftape, the floppy tape device driver
#
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
+#
+# TPM devices
+#
+
#
# I2C support
#
@@ -561,10 +609,20 @@ CONFIG_MAX_RAW_DEVS=256
#
# CONFIG_W1 is not set
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
#
# Misc devices
#
+#
+# Multimedia Capabilities Port drivers
+#
+
#
# Multimedia devices
#
@@ -579,28 +637,36 @@ CONFIG_MAX_RAW_DEVS=256
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
CONFIG_FB_STI=y
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=128
CONFIG_DUMMY_CONSOLE_ROWS=48
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_STI_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
#
# Logo configuration
@@ -610,6 +676,7 @@ CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -656,10 +723,6 @@ CONFIG_SND_HARMONY=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
-
#
# USB Gadget Support
#
@@ -670,11 +733,21 @@ CONFIG_SND_HARMONY=y
#
# CONFIG_MMC is not set
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
@@ -682,20 +755,24 @@ CONFIG_JBD=y
# CONFIG_REISERFS_FS is not set
CONFIG_JFS_FS=m
# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -722,14 +799,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-CONFIG_TMPFS_XATTR=y
-# CONFIG_TMPFS_SECURITY is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -754,16 +828,19 @@ CONFIG_UFS_FS=m
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
@@ -778,6 +855,7 @@ CONFIG_CIFS=m
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -838,13 +916,19 @@ CONFIG_OPROFILE=m
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
#
# Security options
@@ -865,6 +949,7 @@ CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
+CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
@@ -881,10 +966,15 @@ CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
+#
+# Hardware crypto devices
+#
+
#
# Library routines
#
CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
diff --git a/arch/parisc/configs/a500_defconfig b/arch/parisc/configs/a500_defconfig
index 30fc03ed0cfb..955ef5084f3e 100644
--- a/arch/parisc/configs/a500_defconfig
+++ b/arch/parisc/configs/a500_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.11-rc4-pa1
-# Wed Feb 16 11:32:49 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:04:54 2005
#
CONFIG_PARISC=y
CONFIG_MMU=y
@@ -10,6 +10,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
@@ -19,26 +20,32 @@ CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+# CONFIG_CPUSETS is not set
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -48,6 +55,7 @@ CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -74,7 +82,19 @@ CONFIG_PREFETCH=y
CONFIG_64BIT=y
CONFIG_SMP=y
CONFIG_HOTPLUG_CPU=y
+CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+CONFIG_DISCONTIGMEM_MANUAL=y
+# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_NEED_MULTIPLE_NODES=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
CONFIG_COMPAT=y
CONFIG_NR_CPUS=8
@@ -85,7 +105,7 @@ CONFIG_NR_CPUS=8
# CONFIG_GSC is not set
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
@@ -96,6 +116,8 @@ CONFIG_IOMMU_SBA=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
+# CONFIG_PCMCIA_LOAD_CIS is not set
+CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
@@ -104,7 +126,6 @@ CONFIG_CARDBUS=y
CONFIG_YENTA=m
CONFIG_PD6729=m
CONFIG_I82092=m
-CONFIG_TCIC=m
CONFIG_PCCARD_NONSTATIC=m
#
@@ -126,6 +147,203 @@ CONFIG_PDC_STABLE=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+# CONFIG_INET_IPCOMP is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+CONFIG_IP_NF_CONNTRACK_MARK=y
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+CONFIG_IP_NF_CT_PROTO_SCTP=m
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+CONFIG_IP_NF_MATCH_SCTP=m
+# CONFIG_IP_NF_MATCH_DCCP is not set
+CONFIG_IP_NF_MATCH_COMMENT=m
+CONFIG_IP_NF_MATCH_CONNMARK=m
+CONFIG_IP_NF_MATCH_HASHLIMIT=m
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+CONFIG_IP_NF_TARGET_CONNMARK=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_TARGET_NOTRACK=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_HL=m
+# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
+# CONFIG_IP6_NF_MATCH_OWNER is not set
+# CONFIG_IP6_NF_MATCH_MARK is not set
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+# CONFIG_IP6_NF_MATCH_LENGTH is not set
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+CONFIG_IP6_NF_RAW=m
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID3 is not set
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+CONFIG_LLC2=m
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
#
# Device Drivers
#
@@ -138,6 +356,11 @@ CONFIG_BINFMT_ELF=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
#
# Memory Technology Devices (MTD)
#
@@ -169,7 +392,6 @@ CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=6144
CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -189,6 +411,7 @@ CONFIG_IOSCHED_CFQ=y
#
# SCSI device support
#
+CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -201,6 +424,7 @@ CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -215,6 +439,7 @@ CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
+CONFIG_SCSI_SAS_ATTRS=m
#
# SCSI low-level drivers
@@ -229,14 +454,12 @@ CONFIG_SCSI_ISCSI_ATTRS=m
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
@@ -246,8 +469,6 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
CONFIG_SCSI_QLOGIC_FC=m
# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
@@ -258,7 +479,9 @@ CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA22XX is not set
CONFIG_SCSI_QLA2300=m
CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
CONFIG_SCSI_DEBUG=m
@@ -288,8 +511,11 @@ CONFIG_MD_RAID1=y
#
# Fusion MPT device support
#
-CONFIG_FUSION=m
-CONFIG_FUSION_MAX_SGE=40
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+CONFIG_FUSION_FC=m
+# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
#
@@ -303,159 +529,24 @@ CONFIG_FUSION_CTL=m
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-CONFIG_INET_TUNNEL=m
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-CONFIG_IP_NF_CONNTRACK_MARK=y
-CONFIG_IP_NF_CT_PROTO_SCTP=m
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-CONFIG_IP_NF_MATCH_SCTP=m
-CONFIG_IP_NF_MATCH_COMMENT=m
-CONFIG_IP_NF_MATCH_CONNMARK=m
-CONFIG_IP_NF_MATCH_HASHLIMIT=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-CONFIG_IP_NF_TARGET_CONNMARK=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_TARGET_NOTRACK=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-CONFIG_NET_PKTGEN=m
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
#
# Ethernet (10 or 100Mbit)
#
@@ -463,6 +554,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
@@ -479,6 +571,7 @@ CONFIG_TULIP_MMIO=y
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
CONFIG_PCMCIA_XIRCOM=m
# CONFIG_PCMCIA_XIRTULIP is not set
CONFIG_HP100=m
@@ -489,48 +582,43 @@ CONFIG_PCNET32=m
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
-CONFIG_EEPRO100=m
+# CONFIG_EEPRO100 is not set
CONFIG_E100=m
-CONFIG_E100_NAPI=y
# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=m
+# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
-CONFIG_EPIC100=m
+# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
-CONFIG_VIA_RHINE=m
-CONFIG_VIA_RHINE_MMIO=y
+# CONFIG_VIA_RHINE is not set
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
-CONFIG_DL2K=m
+# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
-CONFIG_IXGB=m
-CONFIG_IXGB_NAPI=y
-CONFIG_S2IO=m
-CONFIG_S2IO_NAPI=y
-# CONFIG_2BUFF_MODE is not set
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
+# CONFIG_S2IO is not set
#
# Token Ring devices
@@ -560,6 +648,7 @@ CONFIG_PCMCIA_RAYCS=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
+# CONFIG_NORTEL_HERMES is not set
CONFIG_PCI_HERMES=m
# CONFIG_ATMEL is not set
@@ -567,6 +656,7 @@ CONFIG_PCI_HERMES=m
# Wireless 802.11b Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
@@ -574,6 +664,7 @@ CONFIG_PCMCIA_WL3501=m
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
@@ -607,6 +698,8 @@ CONFIG_PPP_BSDCOMP=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -632,13 +725,6 @@ CONFIG_INPUT=y
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-# CONFIG_SERIO is not set
-
#
# Input Device Drivers
#
@@ -648,6 +734,12 @@ CONFIG_SOUND_GAMEPORT=y
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
#
# Character devices
#
@@ -667,7 +759,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -677,6 +768,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_PDC_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
@@ -707,6 +799,11 @@ CONFIG_GEN_RTC_X=y
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
#
# I2C support
#
@@ -717,10 +814,20 @@ CONFIG_MAX_RAW_DEVS=256
#
# CONFIG_W1 is not set
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
#
# Misc devices
#
+#
+# Multimedia Capabilities Port drivers
+#
+
#
# Multimedia devices
#
@@ -742,6 +849,7 @@ CONFIG_MAX_RAW_DEVS=256
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
+# CONFIG_STI_CONSOLE is not set
#
# Sound
@@ -751,13 +859,9 @@ CONFIG_DUMMY_CONSOLE_ROWS=64
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -772,17 +876,18 @@ CONFIG_USB_ARCH_HAS_OHCI=y
#
# InfiniBand support
#
-CONFIG_INFINIBAND=m
-CONFIG_INFINIBAND_MTHCA=m
-# CONFIG_INFINIBAND_MTHCA_DEBUG is not set
-CONFIG_INFINIBAND_IPOIB=m
-# CONFIG_INFINIBAND_IPOIB_DEBUG is not set
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
@@ -794,22 +899,20 @@ CONFIG_JFS_FS=m
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
-
-#
-# XFS support
-#
CONFIG_XFS_FS=m
CONFIG_XFS_EXPORT=y
-# CONFIG_XFS_RT is not set
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -836,13 +939,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -867,15 +968,18 @@ CONFIG_UFS_FS=m
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
@@ -890,6 +994,7 @@ CONFIG_CIFS=m
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -906,15 +1011,15 @@ CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
+# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
-CONFIG_NLS_CODEPAGE_863=m
+# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
-CONFIG_NLS_CODEPAGE_865=m
+# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
@@ -926,10 +1031,10 @@ CONFIG_NLS_CODEPAGE_865=m
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
@@ -950,11 +1055,15 @@ CONFIG_OPROFILE=m
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_IOREMAP is not set
@@ -974,25 +1083,26 @@ CONFIG_KEYS_DEBUG_PROC_KEYS=y
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MD5=m
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_ANUBIS=m
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
@@ -1004,6 +1114,7 @@ CONFIG_CRYPTO_TEST=m
# Library routines
#
CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
diff --git a/arch/parisc/configs/b180_defconfig b/arch/parisc/configs/b180_defconfig
index 46c9511f3229..8819e7e6ae3f 100644
--- a/arch/parisc/configs/b180_defconfig
+++ b/arch/parisc/configs/b180_defconfig
@@ -1,12 +1,15 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-pa5
-# Wed Jan 5 13:35:54 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:06:10 2005
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
#
# Code maturity level options
@@ -14,33 +17,39 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_EXPERIMENTAL is not set
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
-# CONFIG_IKCONFIG is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -60,8 +69,14 @@ CONFIG_PA7100LC=y
# CONFIG_PA7300LC is not set
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
-# CONFIG_64BIT is not set
# CONFIG_SMP is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
# CONFIG_HPUX is not set
@@ -78,11 +93,25 @@ CONFIG_EISA_NAMES=y
CONFIG_ISA=y
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
CONFIG_GSC_DINO=y
# CONFIG_PCI_LBA is not set
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+
+#
+# PA-RISC specific drivers
+#
CONFIG_CHASSIS_LCD_LED=y
# CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_STABLE=y
#
# Executable file formats
@@ -90,6 +119,64 @@ CONFIG_CHASSIS_LCD_LED=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
#
# Device Drivers
#
@@ -99,8 +186,14 @@ CONFIG_BINFMT_ELF=y
#
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
#
# Memory Technology Devices (MTD)
#
@@ -111,10 +204,8 @@ CONFIG_STANDALONE=y
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
@@ -125,19 +216,17 @@ CONFIG_PARPORT_GSC=y
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
-# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
@@ -149,6 +238,7 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=y
#
# ATA/ATAPI/MFM/RLL support
@@ -158,6 +248,7 @@ CONFIG_IOSCHED_CFQ=y
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -170,6 +261,7 @@ CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -183,16 +275,16 @@ CONFIG_CHR_DEV_SG=y
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
-# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
@@ -202,14 +294,11 @@ CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_IN2000 is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
@@ -219,7 +308,6 @@ CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
CONFIG_SCSI_LASI700=y
-CONFIG_53C700_MEM_MAPPED=y
CONFIG_53C700_LE_ON_BE=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0
@@ -231,7 +319,6 @@ CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -240,12 +327,12 @@ CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
-# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
@@ -263,6 +350,7 @@ CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID5=y
+CONFIG_MD_RAID6=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
@@ -271,6 +359,9 @@ CONFIG_MD_RAID5=y
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -283,58 +374,8 @@ CONFIG_MD_RAID5=y
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
@@ -346,6 +387,11 @@ CONFIG_NETDEVICES=y
#
# CONFIG_ARCNET is not set
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
#
# Ethernet (10 or 100Mbit)
#
@@ -354,8 +400,8 @@ CONFIG_NET_ETHERNET=y
# CONFIG_LASI_82596 is not set
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
-# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
@@ -369,6 +415,7 @@ CONFIG_TULIP=y
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
@@ -384,12 +431,15 @@ CONFIG_TULIP=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
@@ -413,12 +463,12 @@ CONFIG_NET_RADIO=y
#
# Wireless 802.11b ISA/PCI cards support
#
-# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
+# CONFIG_HOSTAP is not set
CONFIG_NET_WIRELESS=y
#
@@ -435,6 +485,8 @@ CONFIG_PPP=y
# CONFIG_PPP_BSDCOMP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -463,24 +515,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=y
-# CONFIG_SERIO_SERPORT is not set
-# CONFIG_SERIO_PARKBD is not set
-CONFIG_SERIO_GSCPS2=y
-# CONFIG_HP_SDC is not set
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_ATKBD=y
+CONFIG_KEYBOARD_ATKBD_HP_KEYCODES=y
+# CONFIG_KEYBOARD_ATKBD_RDI_KEYCODES is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
@@ -488,7 +529,7 @@ CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_HIL_OLD is not set
# CONFIG_KEYBOARD_HIL is not set
CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
+CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
@@ -501,6 +542,19 @@ CONFIG_INPUT_MISC=y
# CONFIG_INPUT_UINPUT is not set
# CONFIG_HP_SDC_RTC is not set
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_GSCPS2=y
+# CONFIG_HP_SDC is not set
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
#
# Character devices
#
@@ -519,8 +573,11 @@ CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
+# CONFIG_SERIAL_8250_FOURPORT is not set
+# CONFIG_SERIAL_8250_ACCENT is not set
+# CONFIG_SERIAL_8250_BOCA is not set
+# CONFIG_SERIAL_8250_HUB6 is not set
#
# Non-8250 serial port support
@@ -529,6 +586,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_PDC_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -555,10 +613,13 @@ CONFIG_GEN_RTC=y
#
# Ftape, the floppy tape device driver
#
-# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
+#
+# TPM devices
+#
+
#
# I2C support
#
@@ -569,10 +630,20 @@ CONFIG_GEN_RTC=y
#
# CONFIG_W1 is not set
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
#
# Misc devices
#
+#
+# Multimedia Capabilities Port drivers
+#
+
#
# Multimedia devices
#
@@ -587,6 +658,11 @@ CONFIG_GEN_RTC=y
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
@@ -595,6 +671,7 @@ CONFIG_FB=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
+# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
@@ -606,18 +683,19 @@ CONFIG_FB_STI=y
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@@ -630,6 +708,7 @@ CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y
CONFIG_LOGO_PARISC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -639,13 +718,9 @@ CONFIG_LOGO_PARISC_CLUT224=y
#
# USB support
#
-# CONFIG_USB is not set
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
-#
+# CONFIG_USB is not set
#
# USB Gadget Support
@@ -657,24 +732,37 @@ CONFIG_USB_ARCH_HAS_OHCI=y
#
# CONFIG_MMC is not set
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -697,11 +785,10 @@ CONFIG_JOLIET=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -719,15 +806,19 @@ CONFIG_RAMFS=y
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SMB_FS is not set
+CONFIG_SMB_FS=y
+# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -785,13 +876,19 @@ CONFIG_NLS_DEFAULT="iso8859-1"
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
#
# Security options
@@ -815,6 +912,7 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
@@ -831,9 +929,14 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
+#
+# Hardware crypto devices
+#
+
#
# Library routines
#
# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
diff --git a/arch/parisc/configs/c3000_defconfig b/arch/parisc/configs/c3000_defconfig
index 67aca6ccc9b0..9d86b6b1ebd1 100644
--- a/arch/parisc/configs/c3000_defconfig
+++ b/arch/parisc/configs/c3000_defconfig
@@ -1,12 +1,16 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-pa5
-# Wed Jan 5 13:26:49 2005
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:06:31 2005
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_ARCH_MAY_HAVE_PC_FDC=y
#
# Code maturity level options
@@ -15,26 +19,31 @@ CONFIG_EXPERIMENTAL=y
# CONFIG_CLEAN_COMPILE is not set
CONFIG_BROKEN=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
-CONFIG_LOG_BUF_SHIFT=16
CONFIG_HOTPLUG=y
CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -44,6 +53,7 @@ CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -66,10 +76,19 @@ CONFIG_KMOD=y
CONFIG_PA8X00=y
CONFIG_PA20=y
CONFIG_PREFETCH=y
-# CONFIG_PARISC64 is not set
# CONFIG_64BIT is not set
# CONFIG_SMP is not set
-# CONFIG_DISCONTIGMEM is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
# CONFIG_HPUX is not set
@@ -79,34 +98,215 @@ CONFIG_PREFETCH=y
# CONFIG_GSC is not set
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
-CONFIG_SUPERIO=y
-CONFIG_CHASSIS_LCD_LED=y
-# CONFIG_PDC_CHASSIS is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
-#
-# PC-card bridges
-#
-
#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set
+#
+# PA-RISC specific drivers
+#
+CONFIG_SUPERIO=y
+CONFIG_CHASSIS_LCD_LED=y
+# CONFIG_PDC_CHASSIS is not set
+CONFIG_PDC_STABLE=y
+
#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+
+#
+# IP: Virtual Server Configuration
+#
+# CONFIG_IP_VS is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NETFILTER=y
+CONFIG_NETFILTER_DEBUG=y
+# CONFIG_NETFILTER_NETLINK is not set
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_IP_NF_CONNTRACK=m
+# CONFIG_IP_NF_CT_ACCT is not set
+# CONFIG_IP_NF_CONNTRACK_MARK is not set
+# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
+# CONFIG_IP_NF_CT_PROTO_SCTP is not set
+CONFIG_IP_NF_FTP=m
+CONFIG_IP_NF_IRC=m
+# CONFIG_IP_NF_NETBIOS_NS is not set
+CONFIG_IP_NF_TFTP=m
+CONFIG_IP_NF_AMANDA=m
+# CONFIG_IP_NF_PPTP is not set
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_LIMIT=m
+CONFIG_IP_NF_MATCH_IPRANGE=m
+CONFIG_IP_NF_MATCH_MAC=m
+CONFIG_IP_NF_MATCH_PKTTYPE=m
+CONFIG_IP_NF_MATCH_MARK=m
+CONFIG_IP_NF_MATCH_MULTIPORT=m
+CONFIG_IP_NF_MATCH_TOS=m
+CONFIG_IP_NF_MATCH_RECENT=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_DSCP=m
+CONFIG_IP_NF_MATCH_AH_ESP=m
+CONFIG_IP_NF_MATCH_LENGTH=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_MATCH_TCPMSS=m
+CONFIG_IP_NF_MATCH_HELPER=m
+CONFIG_IP_NF_MATCH_STATE=m
+CONFIG_IP_NF_MATCH_CONNTRACK=m
+CONFIG_IP_NF_MATCH_OWNER=m
+# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
+# CONFIG_IP_NF_MATCH_REALM is not set
+# CONFIG_IP_NF_MATCH_SCTP is not set
+# CONFIG_IP_NF_MATCH_DCCP is not set
+# CONFIG_IP_NF_MATCH_COMMENT is not set
+# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
+# CONFIG_IP_NF_MATCH_STRING is not set
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_IP_NF_TARGET_TCPMSS=m
+# CONFIG_IP_NF_TARGET_NFQUEUE is not set
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_SAME=m
+CONFIG_IP_NF_NAT_SNMP_BASIC=m
+CONFIG_IP_NF_NAT_IRC=m
+CONFIG_IP_NF_NAT_FTP=m
+CONFIG_IP_NF_NAT_TFTP=m
+CONFIG_IP_NF_NAT_AMANDA=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_TOS=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_DSCP=m
+CONFIG_IP_NF_TARGET_MARK=m
+CONFIG_IP_NF_TARGET_CLASSIFY=m
+# CONFIG_IP_NF_TARGET_TTL is not set
+# CONFIG_IP_NF_RAW is not set
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP6_NF_QUEUE is not set
+CONFIG_IP6_NF_IPTABLES=m
+# CONFIG_IP6_NF_MATCH_LIMIT is not set
+CONFIG_IP6_NF_MATCH_MAC=m
+CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_MATCH_OPTS is not set
+# CONFIG_IP6_NF_MATCH_FRAG is not set
+# CONFIG_IP6_NF_MATCH_HL is not set
+# CONFIG_IP6_NF_MATCH_MULTIPORT is not set
+CONFIG_IP6_NF_MATCH_OWNER=m
+# CONFIG_IP6_NF_MATCH_MARK is not set
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+# CONFIG_IP6_NF_MATCH_AHESP is not set
+CONFIG_IP6_NF_MATCH_LENGTH=m
+# CONFIG_IP6_NF_MATCH_EUI64 is not set
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+# CONFIG_IP6_NF_TARGET_NFQUEUE is not set
+CONFIG_IP6_NF_MANGLE=m
+# CONFIG_IP6_NF_TARGET_MARK is not set
+# CONFIG_IP6_NF_TARGET_HL is not set
+# CONFIG_IP6_NF_RAW is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+CONFIG_NET_PKTGEN=m
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
#
# Device Drivers
#
@@ -119,6 +319,11 @@ CONFIG_BINFMT_ELF=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
#
# Memory Technology Devices (MTD)
#
@@ -141,14 +346,14 @@ CONFIG_FW_LOADER=y
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_UMEM=m
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
@@ -158,6 +363,7 @@ CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -201,6 +407,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT821X is not set
CONFIG_BLK_DEV_NS87415=y
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
@@ -218,6 +425,7 @@ CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -230,6 +438,7 @@ CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
@@ -242,7 +451,9 @@ CONFIG_SCSI_MULTI_LUN=y
# SCSI Transport Attributes
#
CONFIG_SCSI_SPI_ATTRS=y
-CONFIG_SCSI_FC_ATTRS=m
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_ATTRS is not set
#
# SCSI low-level drivers
@@ -258,25 +469,26 @@ CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
CONFIG_SCSI_SATA=y
# CONFIG_SCSI_SATA_AHCI is not set
# CONFIG_SCSI_SATA_SVW is not set
CONFIG_SCSI_ATA_PIIX=m
+# CONFIG_SCSI_SATA_MV is not set
# CONFIG_SCSI_SATA_NV is not set
CONFIG_SCSI_SATA_PROMISE=m
+# CONFIG_SCSI_SATA_QSTOR is not set
# CONFIG_SCSI_SATA_SX4 is not set
CONFIG_SCSI_SATA_SIL=m
# CONFIG_SCSI_SATA_SIS is not set
# CONFIG_SCSI_SATA_ULI is not set
CONFIG_SCSI_SATA_VIA=m
# CONFIG_SCSI_SATA_VITESSE is not set
-# CONFIG_SCSI_BUSLOGIC is not set
+CONFIG_SCSI_SATA_INTEL_COMBINED=y
# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
@@ -286,20 +498,17 @@ CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
# CONFIG_SCSI_IPR is not set
-# CONFIG_SCSI_PCI2000 is not set
-# CONFIG_SCSI_PCI2220I is not set
# CONFIG_SCSI_QLOGIC_ISP is not set
-CONFIG_SCSI_QLOGIC_FC=m
-# CONFIG_SCSI_QLOGIC_FC_FIRMWARE is not set
-CONFIG_SCSI_QLOGIC_1280=m
-# CONFIG_SCSI_QLOGIC_1280_1040 is not set
+# CONFIG_SCSI_QLOGIC_FC is not set
+# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA21XX is not set
# CONFIG_SCSI_QLA22XX is not set
-CONFIG_SCSI_QLA2300=m
-CONFIG_SCSI_QLA2322=m
-CONFIG_SCSI_QLA6312=m
-CONFIG_SCSI_QLA6322=m
+# CONFIG_SCSI_QLA2300 is not set
+# CONFIG_SCSI_QLA2322 is not set
+# CONFIG_SCSI_QLA6312 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
@@ -316,19 +525,24 @@ CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID5 is not set
# CONFIG_MD_RAID6 is not set
-CONFIG_MD_MULTIPATH=y
+# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
-CONFIG_BLK_DEV_DM=y
-# CONFIG_DM_CRYPT is not set
-# CONFIG_DM_SNAPSHOT is not set
-# CONFIG_DM_MIRROR is not set
-# CONFIG_DM_ZERO is not set
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_EMC is not set
#
# Fusion MPT device support
#
-CONFIG_FUSION=m
-CONFIG_FUSION_MAX_SGE=40
+CONFIG_FUSION=y
+CONFIG_FUSION_SPI=m
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
+CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
#
@@ -342,164 +556,32 @@ CONFIG_FUSION_CTL=m
# CONFIG_I2O is not set
#
-# Networking support
+# Network device support
#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_IP_TCPDIAG=y
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-
-#
-# IP: Virtual Server Configuration
-#
-# CONFIG_IP_VS is not set
-# CONFIG_IPV6 is not set
-CONFIG_NETFILTER=y
-CONFIG_NETFILTER_DEBUG=y
-
-#
-# IP: Netfilter Configuration
-#
-CONFIG_IP_NF_CONNTRACK=m
-# CONFIG_IP_NF_CT_ACCT is not set
-# CONFIG_IP_NF_CONNTRACK_MARK is not set
-# CONFIG_IP_NF_CT_PROTO_SCTP is not set
-CONFIG_IP_NF_FTP=m
-CONFIG_IP_NF_IRC=m
-CONFIG_IP_NF_TFTP=m
-CONFIG_IP_NF_AMANDA=m
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_LIMIT=m
-CONFIG_IP_NF_MATCH_IPRANGE=m
-CONFIG_IP_NF_MATCH_MAC=m
-CONFIG_IP_NF_MATCH_PKTTYPE=m
-CONFIG_IP_NF_MATCH_MARK=m
-CONFIG_IP_NF_MATCH_MULTIPORT=m
-CONFIG_IP_NF_MATCH_TOS=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_DSCP=m
-CONFIG_IP_NF_MATCH_AH_ESP=m
-CONFIG_IP_NF_MATCH_LENGTH=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_TCPMSS=m
-CONFIG_IP_NF_MATCH_HELPER=m
-CONFIG_IP_NF_MATCH_STATE=m
-CONFIG_IP_NF_MATCH_CONNTRACK=m
-CONFIG_IP_NF_MATCH_OWNER=m
-# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
-# CONFIG_IP_NF_MATCH_REALM is not set
-# CONFIG_IP_NF_MATCH_SCTP is not set
-# CONFIG_IP_NF_MATCH_COMMENT is not set
-# CONFIG_IP_NF_MATCH_HASHLIMIT is not set
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_TARGET_TCPMSS=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_NAT_NEEDED=y
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_SAME=m
-CONFIG_IP_NF_NAT_SNMP_BASIC=m
-CONFIG_IP_NF_NAT_IRC=m
-CONFIG_IP_NF_NAT_FTP=m
-CONFIG_IP_NF_NAT_TFTP=m
-CONFIG_IP_NF_NAT_AMANDA=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_TOS=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_DSCP=m
-CONFIG_IP_NF_TARGET_MARK=m
-CONFIG_IP_NF_TARGET_CLASSIFY=m
-# CONFIG_IP_NF_RAW is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_IP_NF_COMPAT_IPCHAINS=m
-CONFIG_IP_NF_COMPAT_IPFWADM=m
-CONFIG_XFRM=y
-CONFIG_XFRM_USER=m
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-CONFIG_LLC=m
-CONFIG_LLC2=m
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
-# CONFIG_ETHERTAP is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
+
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
-CONFIG_HAPPYMEAL=m
+# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
#
@@ -514,28 +596,22 @@ CONFIG_TULIP_MMIO=y
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
-CONFIG_PCNET32=m
+# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
-CONFIG_ADAPTEC_STARFIRE=m
-# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
-CONFIG_B44=m
+# CONFIG_ADAPTEC_STARFIRE is not set
+# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
-CONFIG_EEPRO100=m
-# CONFIG_EEPRO100_PIO is not set
+# CONFIG_EEPRO100 is not set
CONFIG_E100=m
-# CONFIG_E100_NAPI is not set
# CONFIG_FEALNX is not set
-CONFIG_NATSEMI=m
+# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
-CONFIG_8139TOO=m
-# CONFIG_8139TOO_PIO is not set
-# CONFIG_8139TOO_TUNE_TWISTER is not set
-# CONFIG_8139TOO_8129 is not set
-# CONFIG_8139_OLD_RX_RESET is not set
+# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
@@ -554,15 +630,18 @@ CONFIG_E1000=m
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=m
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
-CONFIG_IXGB=y
-CONFIG_IXGB_NAPI=y
+# CONFIG_CHELSIO_T1 is not set
+# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
#
@@ -593,6 +672,8 @@ CONFIG_PPPOE=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -621,16 +702,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1200
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
-#
-# Input I/O drivers
-#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
-CONFIG_SERIO=m
-CONFIG_SERIO_SERPORT=m
-# CONFIG_SERIO_PCIPS2 is not set
-# CONFIG_SERIO_RAW is not set
-
#
# Input Device Drivers
#
@@ -648,6 +719,16 @@ CONFIG_INPUT_MOUSE=y
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=m
+CONFIG_SERIO_SERPORT=m
+# CONFIG_SERIO_PCIPS2 is not set
+CONFIG_SERIO_LIBPS2=m
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
#
# Character devices
#
@@ -666,7 +747,6 @@ CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
@@ -676,6 +756,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_PDC_CONSOLE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -698,11 +779,15 @@ CONFIG_GEN_RTC_X=y
#
# Ftape, the floppy tape device driver
#
-# CONFIG_AGP is not set
# CONFIG_DRM is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
#
# I2C support
#
@@ -713,10 +798,20 @@ CONFIG_MAX_RAW_DEVS=256
#
# CONFIG_W1 is not set
+#
+# Hardware Monitoring support
+#
+# CONFIG_HWMON is not set
+# CONFIG_HWMON_VID is not set
+
#
# Misc devices
#
+#
+# Multimedia Capabilities Port drivers
+#
+
#
# Multimedia devices
#
@@ -731,6 +826,11 @@ CONFIG_MAX_RAW_DEVS=256
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
@@ -739,6 +839,7 @@ CONFIG_FB=y
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
+# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
@@ -751,18 +852,20 @@ CONFIG_FB_STI=y
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@@ -775,6 +878,7 @@ CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_VGA16 is not set
# CONFIG_LOGO_LINUX_CLUT224 is not set
CONFIG_LOGO_PARISC_CLUT224=y
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -784,7 +888,78 @@ CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
-# CONFIG_SND is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_AD1889=y
+# CONFIG_SND_AD1889_OPL3 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
#
# Open Sound System
@@ -794,6 +969,8 @@ CONFIG_SOUND=y
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
@@ -804,23 +981,23 @@ CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
@@ -829,12 +1006,11 @@ CONFIG_USB_PRINTER=m
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_RW_DETECT is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
-CONFIG_USB_STORAGE_HP8200e=y
+CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
@@ -846,21 +1022,25 @@ CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
-CONFIG_USB_AIPTEK=m
-CONFIG_USB_WACOM=m
-CONFIG_USB_KBTAB=m
+# CONFIG_USB_AIPTEK is not set
+# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
+# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
-CONFIG_USB_HPUSBSCSI=m
#
# USB Multimedia devices
@@ -879,6 +1059,7 @@ CONFIG_USB_HPUSBSCSI=m
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_USB_MON is not set
#
# USB port drivers
@@ -894,7 +1075,6 @@ CONFIG_USB_HPUSBSCSI=m
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
CONFIG_USB_LEGOTOWER=m
@@ -903,10 +1083,12 @@ CONFIG_USB_LEGOTOWER=m
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set
#
-# USB ATM/DSL drivers
+# USB DSL modem support
#
#
@@ -919,28 +1101,42 @@ CONFIG_USB_LEGOTOWER=m
#
# CONFIG_MMC is not set
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
CONFIG_XFS_FS=m
-# CONFIG_XFS_RT is not set
+CONFIG_XFS_EXPORT=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -966,13 +1162,11 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
-# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -996,16 +1190,19 @@ CONFIG_RAMFS=y
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -1014,6 +1211,7 @@ CONFIG_SUNRPC=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -1074,13 +1272,19 @@ CONFIG_OPROFILE=m
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
#
# Security options
@@ -1092,21 +1296,22 @@ CONFIG_MAGIC_SYSRQ=y
# Cryptographic options
#
CONFIG_CRYPTO=y
-CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_HMAC is not set
CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_MD4=m
+# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
+# CONFIG_CRYPTO_TWOFISH is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
@@ -1116,10 +1321,15 @@ CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_TEST=m
+#
+# Hardware crypto devices
+#
+
#
# Library routines
#
CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
diff --git a/arch/parisc/defconfig b/arch/parisc/defconfig
index fdae21c503d7..f38a4620d24f 100644
--- a/arch/parisc/defconfig
+++ b/arch/parisc/defconfig
@@ -1,38 +1,56 @@
#
# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.14-rc5-pa1
+# Fri Oct 21 23:01:33 2005
#
CONFIG_PARISC=y
CONFIG_MMU=y
CONFIG_STACK_GROWSUP=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_IRQ_PROBE=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
-CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
#
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
-CONFIG_LOG_BUF_SHIFT=15
+# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
+CONFIG_KOBJECT_UEVENT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
+CONFIG_INITRAMFS_SOURCE=""
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_SHMEM=y
+CONFIG_CC_ALIGN_FUNCTIONS=0
+CONFIG_CC_ALIGN_LABELS=0
+CONFIG_CC_ALIGN_LOOPS=0
+CONFIG_CC_ALIGN_JUMPS=0
+# CONFIG_TINY_SHMEM is not set
+CONFIG_BASE_SMALL=0
#
# Loadable module support
@@ -45,10 +63,21 @@ CONFIG_IOSCHED_DEADLINE=y
CONFIG_PA7000=y
# CONFIG_PA7100LC is not set
# CONFIG_PA7200 is not set
+# CONFIG_PA7300LC is not set
# CONFIG_PA8X00 is not set
CONFIG_PA11=y
-# CONFIG_64BIT is not set
# CONFIG_SMP is not set
+# CONFIG_HZ_100 is not set
+CONFIG_HZ_250=y
+# CONFIG_HZ_1000 is not set
+CONFIG_HZ=250
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+# CONFIG_SPARSEMEM_STATIC is not set
# CONFIG_PREEMPT is not set
# CONFIG_HPUX is not set
@@ -65,14 +94,29 @@ CONFIG_EISA_NAMES=y
# CONFIG_ISA is not set
CONFIG_PCI=y
CONFIG_PCI_LEGACY_PROC=y
-CONFIG_PCI_NAMES=y
+# CONFIG_PCI_DEBUG is not set
CONFIG_GSC_DINO=y
CONFIG_PCI_LBA=y
CONFIG_IOSAPIC=y
CONFIG_IOMMU_SBA=y
+
+#
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PCI Hotplug Support
+#
+# CONFIG_HOTPLUG_PCI is not set
+
+#
+# PA-RISC specific drivers
+#
CONFIG_SUPERIO=y
CONFIG_CHASSIS_LCD_LED=y
CONFIG_PDC_CHASSIS=y
+CONFIG_PDC_STABLE=y
#
# Executable file formats
@@ -80,6 +124,80 @@ CONFIG_PDC_CHASSIS=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
+#
+# Networking
+#
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+# CONFIG_IP_PNP_DHCP is not set
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_TUNNEL is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_BIC=y
+CONFIG_IPV6=y
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_INET6_TUNNEL is not set
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_NETFILTER is not set
+
+#
+# DCCP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP is not set
+
+#
+# SCTP Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_SCTP is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_NET_DIVERT is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_IEEE80211 is not set
+
#
# Device Drivers
#
@@ -87,8 +205,16 @@ CONFIG_BINFMT_ELF=y
#
# Generic Driver Options
#
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
+#
+# Connector - unified userspace <-> kernelspace linker
+#
+# CONFIG_CONNECTOR is not set
+
#
# Memory Technology Devices (MTD)
#
@@ -99,12 +225,10 @@ CONFIG_BINFMT_ELF=y
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
-CONFIG_PARPORT_PC_CML1=y
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
CONFIG_PARPORT_GSC=y
-# CONFIG_PARPORT_OTHER is not set
# CONFIG_PARPORT_1284 is not set
#
@@ -114,18 +238,31 @@ CONFIG_PARPORT_GSC=y
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_INITRD=y
+# CONFIG_CDROM_PKTCDVD is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_ATA_OVER_ETH is not set
#
# ATA/ATAPI/MFM/RLL support
@@ -135,6 +272,7 @@ CONFIG_BLK_DEV_INITRD=y
#
# SCSI device support
#
+# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_PROC_FS=y
@@ -147,53 +285,59 @@ CONFIG_CHR_DEV_ST=y
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
+# CONFIG_CHR_DEV_SCH is not set
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_REPORT_LUNS is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
+#
+# SCSI Transport Attributes
+#
+CONFIG_SCSI_SPI_ATTRS=y
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+
#
# SCSI low-level drivers
#
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
+# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA1740 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
-# CONFIG_SCSI_ADVANSYS is not set
-# CONFIG_SCSI_MEGARAID is not set
+# CONFIG_SCSI_DPT_I2O is not set
+# CONFIG_MEGARAID_NEWGEN is not set
+# CONFIG_MEGARAID_LEGACY is not set
+# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_SATA is not set
-# CONFIG_SCSI_BUSLOGIC is not set
-# CONFIG_SCSI_CPQFCTS is not set
# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_EATA is not set
-# CONFIG_SCSI_EATA_PIO is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
+# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_LASI700=y
-CONFIG_53C700_MEM_MAPPED=y
CONFIG_53C700_LE_ON_BE=y
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
+# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_ZALON=y
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=20
# CONFIG_SCSI_NCR53C8XX_PROFILE is not set
-# CONFIG_SCSI_QLOGIC_ISP is not set
# CONFIG_SCSI_QLOGIC_FC is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
CONFIG_SCSI_QLA2XXX=y
@@ -202,7 +346,8 @@ CONFIG_SCSI_QLA2XXX=y
# CONFIG_SCSI_QLA2300 is not set
# CONFIG_SCSI_QLA2322 is not set
# CONFIG_SCSI_QLA6312 is not set
-# CONFIG_SCSI_QLA6322 is not set
+# CONFIG_SCSI_QLA24XX is not set
+# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SIM710 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
@@ -217,15 +362,20 @@ CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
+# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID5=y
# CONFIG_MD_RAID6 is not set
# CONFIG_MD_MULTIPATH is not set
+# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
+# CONFIG_FUSION_SPI is not set
+# CONFIG_FUSION_FC is not set
+# CONFIG_FUSION_SAS is not set
#
# IEEE 1394 (FireWire) support
@@ -238,80 +388,23 @@ CONFIG_MD_RAID5=y
# CONFIG_I2O is not set
#
-# Macintosh device drivers
+# Network device support
#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_NETLINK_DEV=y
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_DHCP is not set
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_IP_MROUTE is not set
-# CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-CONFIG_IPV6_SCTP__=y
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_HW_FLOWCONTROL is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_ETHERTAP is not set
+
+#
+# PHY device support
+#
+# CONFIG_PHYLIB is not set
#
# Ethernet (10 or 100Mbit)
@@ -321,6 +414,7 @@ CONFIG_NET_ETHERNET=y
CONFIG_LASI_82596=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
+# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_SMC is not set
@@ -336,6 +430,7 @@ CONFIG_TULIP=y
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
+# CONFIG_ULI526X is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
@@ -361,30 +456,37 @@ CONFIG_NET_PCI=y
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
+# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
-# CONFIG_ACENIC is not set
-CONFIG_DL2K=y
+CONFIG_ACENIC=y
+# CONFIG_ACENIC_OMIT_TIGON_I is not set
+# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
+# CONFIG_VIA_VELOCITY is not set
+CONFIG_TIGON3=y
+# CONFIG_BNX2 is not set
#
# Ethernet (10000 Mbit)
#
+# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
+# CONFIG_S2IO is not set
+
+#
+# Token Ring devices
+#
+# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
@@ -399,38 +501,30 @@ CONFIG_NET_RADIO=y
#
# Wireless 802.11b ISA/PCI cards support
#
-CONFIG_AIRO=y
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
-CONFIG_NET_WIRELESS=y
#
-# Token Ring devices
+# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
-# CONFIG_TR is not set
-# CONFIG_NET_FC is not set
-# CONFIG_RCPCI is not set
-# CONFIG_SHAPER is not set
+# CONFIG_PRISM54 is not set
+# CONFIG_HOSTAP is not set
+CONFIG_NET_WIRELESS=y
#
# Wan interfaces
#
# CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
#
# ISDN subsystem
@@ -460,10 +554,56 @@ CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
-# Input I/O drivers
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+CONFIG_KEYBOARD_HIL_OLD=y
+CONFIG_KEYBOARD_HIL=y
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_HIL is not set
+CONFIG_INPUT_JOYSTICK=y
+# CONFIG_JOYSTICK_ANALOG is not set
+# CONFIG_JOYSTICK_A3D is not set
+# CONFIG_JOYSTICK_ADI is not set
+# CONFIG_JOYSTICK_COBRA is not set
+# CONFIG_JOYSTICK_GF2K is not set
+# CONFIG_JOYSTICK_GRIP is not set
+# CONFIG_JOYSTICK_GRIP_MP is not set
+# CONFIG_JOYSTICK_GUILLEMOT is not set
+# CONFIG_JOYSTICK_INTERACT is not set
+# CONFIG_JOYSTICK_SIDEWINDER is not set
+# CONFIG_JOYSTICK_TMDC is not set
+# CONFIG_JOYSTICK_IFORCE is not set
+# CONFIG_JOYSTICK_WARRIOR is not set
+# CONFIG_JOYSTICK_MAGELLAN is not set
+# CONFIG_JOYSTICK_SPACEORB is not set
+# CONFIG_JOYSTICK_SPACEBALL is not set
+# CONFIG_JOYSTICK_STINGER is not set
+# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_DB9 is not set
+# CONFIG_JOYSTICK_GAMECON is not set
+# CONFIG_JOYSTICK_TURBOGRAFX is not set
+# CONFIG_JOYSTICK_JOYDUMP is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_UINPUT is not set
+CONFIG_HP_SDC_RTC=y
+
+#
+# Hardware I/O ports
#
-# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
CONFIG_SERIO=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PARKBD is not set
@@ -471,38 +611,8 @@ CONFIG_SERIO_GSCPS2=y
CONFIG_HP_SDC=y
CONFIG_HIL_MLC=y
# CONFIG_SERIO_PCIPS2 is not set
-
-#
-# Input Device Drivers
-#
-CONFIG_INPUT_KEYBOARD=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_KEYBOARD_HIL=y
-CONFIG_INPUT_MOUSE=y
-# CONFIG_MOUSE_PS2 is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_HIL is not set
-CONFIG_INPUT_JOYSTICK=y
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDDLER is not set
-# CONFIG_JOYSTICK_DB9 is not set
-# CONFIG_JOYSTICK_GAMECON is not set
-# CONFIG_JOYSTICK_TURBOGRAFX is not set
-# CONFIG_INPUT_JOYDUMP is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-CONFIG_INPUT_MISC=y
-# CONFIG_INPUT_PCSPKR is not set
-# CONFIG_INPUT_UINPUT is not set
-CONFIG_HP_SDC_RTC=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
#
# Character devices
@@ -522,16 +632,16 @@ CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
-# CONFIG_SERIAL_MUX is not set
-# CONFIG_PDC_CONSOLE is not set
+CONFIG_SERIAL_MUX=y
+CONFIG_SERIAL_MUX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
@@ -540,12 +650,6 @@ CONFIG_PRINTER=y
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
#
# IPMI
#
@@ -555,7 +659,6 @@ CONFIG_PRINTER=y
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# CONFIG_DTLK is not set
@@ -565,20 +668,39 @@ CONFIG_GEN_RTC=y
#
# Ftape, the floppy tape device driver
#
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
+#
+# TPM devices
+#
+# CONFIG_TCG_TPM is not set
+
#
# I2C support
#
# CONFIG_I2C is not set
+#
+# Dallas's 1-wire bus
+#
+# CONFIG_W1 is not set
+
+#
+# Hardware Monitoring support
+#
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
#
# Misc devices
#
+#
+# Multimedia Capabilities Port drivers
+#
+
#
# Multimedia devices
#
@@ -593,34 +715,45 @@ CONFIG_GEN_RTC=y
# Graphics support
#
CONFIG_FB=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
+# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_STI=y
+# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON_OLD is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
+# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
+# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
-# CONFIG_MDA_CONSOLE is not set
-CONFIG_STI_CONSOLE=y
+CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=160
CONFIG_DUMMY_CONSOLE_ROWS=64
-CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_PCI_CONSOLE=y
+CONFIG_STI_CONSOLE=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
@@ -629,6 +762,7 @@ CONFIG_FONT_8x16=y
# Logo configuration
#
# CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Sound
@@ -638,17 +772,94 @@ CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
-# CONFIG_SND is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_SEQUENCER=y
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+
+#
+# Generic devices
+#
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_AC97_CODEC=y
+CONFIG_SND_AC97_BUS=y
+
+#
+# PCI devices
+#
+# CONFIG_SND_ALI5451 is not set
+# CONFIG_SND_ATIIXP is not set
+# CONFIG_SND_ATIIXP_MODEM is not set
+# CONFIG_SND_AU8810 is not set
+# CONFIG_SND_AU8820 is not set
+# CONFIG_SND_AU8830 is not set
+# CONFIG_SND_AZT3328 is not set
+# CONFIG_SND_BT87X is not set
+# CONFIG_SND_CS46XX is not set
+# CONFIG_SND_CS4281 is not set
+# CONFIG_SND_EMU10K1 is not set
+# CONFIG_SND_EMU10K1X is not set
+# CONFIG_SND_CA0106 is not set
+# CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_MIXART is not set
+# CONFIG_SND_NM256 is not set
+# CONFIG_SND_RME32 is not set
+# CONFIG_SND_RME96 is not set
+# CONFIG_SND_RME9652 is not set
+# CONFIG_SND_HDSP is not set
+# CONFIG_SND_HDSPM is not set
+# CONFIG_SND_TRIDENT is not set
+# CONFIG_SND_YMFPCI is not set
+CONFIG_SND_AD1889=y
+# CONFIG_SND_AD1889_OPL3 is not set
+# CONFIG_SND_CMIPCI is not set
+# CONFIG_SND_ENS1370 is not set
+# CONFIG_SND_ENS1371 is not set
+# CONFIG_SND_ES1938 is not set
+# CONFIG_SND_ES1968 is not set
+# CONFIG_SND_MAESTRO3 is not set
+# CONFIG_SND_FM801 is not set
+# CONFIG_SND_ICE1712 is not set
+# CONFIG_SND_ICE1724 is not set
+# CONFIG_SND_INTEL8X0 is not set
+# CONFIG_SND_INTEL8X0M is not set
+# CONFIG_SND_SONICVIBES is not set
+# CONFIG_SND_VIA82XX is not set
+# CONFIG_SND_VIA82XX_MODEM is not set
+# CONFIG_SND_VX222 is not set
+# CONFIG_SND_HDA_INTEL is not set
+
+#
+# USB devices
+#
+# CONFIG_SND_USB_AUDIO is not set
+
+#
+# GSC devices
+#
+CONFIG_SND_HARMONY=y
#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
-# CONFIG_SOUND_HARMONY is not set
#
# USB support
#
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
@@ -658,26 +869,36 @@ CONFIG_USB_DEBUG=y
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_SPLIT_ISO is not set
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_BIG_ENDIAN is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
-# CONFIG_USB_AUDIO is not set
+# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
-# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
+
+#
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
# CONFIG_USB_STORAGE is not set
#
-# USB Human Interface Devices (HID)
+# USB Input Devices
#
# CONFIG_USB_HID is not set
@@ -688,16 +909,23 @@ CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
+# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
+# CONFIG_USB_MTOUCH is not set
+# CONFIG_USB_ITMTOUCH is not set
+# CONFIG_USB_EGALAX is not set
+# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
+# CONFIG_USB_ATI_REMOTE is not set
+# CONFIG_USB_KEYSPAN_REMOTE is not set
+# CONFIG_USB_APPLETOUCH is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_HPUSBSCSI is not set
#
# USB Multimedia devices
@@ -709,13 +937,15 @@ CONFIG_USB_OHCI_HCD=y
#
#
-# USB Network adaptors
+# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
+# CONFIG_USB_ZD1201 is not set
+CONFIG_USB_MON=y
#
# USB port drivers
@@ -732,35 +962,63 @@ CONFIG_USB_OHCI_HCD=y
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_PHIDGETKIT is not set
+# CONFIG_USB_PHIDGETSERVO is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+
+#
+# USB DSL modem support
+#
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
+#
+# MMC/SD Card support
+#
+# CONFIG_MMC is not set
+
+#
+# InfiniBand support
+#
+# CONFIG_INFINIBAND is not set
+
+#
+# SN Devices
+#
+
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
+CONFIG_INOTIFY=y
# CONFIG_QUOTA is not set
+CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
#
# CD-ROM/DVD Filesystems
@@ -773,7 +1031,8 @@ CONFIG_JOLIET=y
#
# DOS/FAT/NT Filesystems
#
-# CONFIG_FAT_FS is not set
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
@@ -781,11 +1040,11 @@ CONFIG_JOLIET=y
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
+CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
+# CONFIG_RELAYFS_FS is not set
#
# Miscellaneous filesystems
@@ -809,23 +1068,28 @@ CONFIG_RAMFS=y
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
+CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
+# CONFIG_9P_FS is not set
#
# Partition Types
@@ -861,6 +1125,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
@@ -885,17 +1150,24 @@ CONFIG_OPROFILE=y
#
# Kernel hacking
#
+# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SLAB is not set
CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_RWLOCK is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_IOREMAP is not set
+# CONFIG_DEBUG_FS is not set
#
# Security options
#
+# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
@@ -909,6 +1181,8 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_WP512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
@@ -916,11 +1190,23 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
+#
+# Hardware crypto devices
+#
+
#
# Library routines
#
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c
index f46a07a79218..e15f09eaed12 100644
--- a/arch/parisc/kernel/cache.c
+++ b/arch/parisc/kernel/cache.c
@@ -27,6 +27,7 @@
#include
#include
#include
+#include
int split_tlb;
int dcache_stride;
@@ -207,6 +208,9 @@ parisc_cache_init(void)
/* "New and Improved" version from Jim Hull
* (1 << (cc_block-1)) * (cc_line << (4 + cnf.cc_shift))
+ * The following CAFL_STRIDE is an optimized version, see
+ * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023625.html
+ * http://lists.parisc-linux.org/pipermail/parisc-linux/2004-June/023671.html
*/
#define CAFL_STRIDE(cnf) (cnf.cc_line << (3 + cnf.cc_block + cnf.cc_shift))
dcache_stride = CAFL_STRIDE(cache_info.dc_conf);
@@ -339,17 +343,15 @@ int parisc_cache_flush_threshold = FLUSH_THRESHOLD;
void parisc_setup_cache_timing(void)
{
unsigned long rangetime, alltime;
- extern char _text; /* start of kernel code, defined by linker */
- extern char _end; /* end of BSS, defined by linker */
unsigned long size;
alltime = mfctl(16);
flush_data_cache();
alltime = mfctl(16) - alltime;
- size = (unsigned long)(&_end - _text);
+ size = (unsigned long)(_end - _text);
rangetime = mfctl(16);
- flush_kernel_dcache_range((unsigned long)&_text, size);
+ flush_kernel_dcache_range((unsigned long)_text, size);
rangetime = mfctl(16) - rangetime;
printk(KERN_DEBUG "Whole cache flush %lu cycles, flushing %lu bytes %lu cycles\n",
diff --git a/arch/parisc/kernel/drivers.c b/arch/parisc/kernel/drivers.c
index d34bbe7ae0e3..988844a169e6 100644
--- a/arch/parisc/kernel/drivers.c
+++ b/arch/parisc/kernel/drivers.c
@@ -46,36 +46,51 @@ static struct device root = {
.bus_id = "parisc",
};
-#define for_each_padev(padev) \
- for (padev = next_dev(&root); padev != NULL; \
- padev = next_dev(&padev->dev))
+static inline int check_dev(struct device *dev)
+{
+ if (dev->bus == &parisc_bus_type) {
+ struct parisc_device *pdev;
+ pdev = to_parisc_device(dev);
+ return pdev->id.hw_type != HPHW_FAULTY;
+ }
+ return 1;
+}
-#define check_dev(padev) \
- (padev->id.hw_type != HPHW_FAULTY) ? padev : next_dev(&padev->dev)
+static struct device *
+parse_tree_node(struct device *parent, int index, struct hardware_path *modpath);
+
+struct recurse_struct {
+ void * obj;
+ int (*fn)(struct device *, void *);
+};
+
+static int descend_children(struct device * dev, void * data)
+{
+ struct recurse_struct * recurse_data = (struct recurse_struct *)data;
+
+ if (recurse_data->fn(dev, recurse_data->obj))
+ return 1;
+ else
+ return device_for_each_child(dev, recurse_data, descend_children);
+}
/**
- * next_dev - enumerates registered devices
- * @dev: the previous device returned from next_dev
+ * for_each_padev - Iterate over all devices in the tree
+ * @fn: Function to call for each device.
+ * @data: Data to pass to the called function.
*
- * next_dev does a depth-first search of the tree, returning parents
- * before children. Returns NULL when there are no more devices.
+ * This performs a depth-first traversal of the tree, calling the
+ * function passed for each node. It calls the function for parents
+ * before children.
*/
-static struct parisc_device *next_dev(struct device *dev)
+
+static int for_each_padev(int (*fn)(struct device *, void *), void * data)
{
- if (!list_empty(&dev->children)) {
- dev = list_to_dev(dev->children.next);
- return check_dev(to_parisc_device(dev));
- }
-
- while (dev != &root) {
- if (dev->node.next != &dev->parent->children) {
- dev = list_to_dev(dev->node.next);
- return to_parisc_device(dev);
- }
- dev = dev->parent;
- }
-
- return NULL;
+ struct recurse_struct recurse_data = {
+ .obj = data,
+ .fn = fn,
+ };
+ return device_for_each_child(&root, &recurse_data, descend_children);
}
/**
@@ -105,12 +120,6 @@ static int match_device(struct parisc_driver *driver, struct parisc_device *dev)
return 0;
}
-static void claim_device(struct parisc_driver *driver, struct parisc_device *dev)
-{
- dev->driver = driver;
- request_mem_region(dev->hpa, 0x1000, driver->name);
-}
-
static int parisc_driver_probe(struct device *dev)
{
int rc;
@@ -119,8 +128,8 @@ static int parisc_driver_probe(struct device *dev)
rc = pa_drv->probe(pa_dev);
- if(!rc)
- claim_device(pa_drv, pa_dev);
+ if (!rc)
+ pa_dev->driver = pa_drv;
return rc;
}
@@ -131,7 +140,6 @@ static int parisc_driver_remove(struct device *dev)
struct parisc_driver *pa_drv = to_parisc_driver(dev->driver);
if (pa_drv->remove)
pa_drv->remove(pa_dev);
- release_mem_region(pa_dev->hpa, 0x1000);
return 0;
}
@@ -173,6 +181,24 @@ int register_parisc_driver(struct parisc_driver *driver)
}
EXPORT_SYMBOL(register_parisc_driver);
+
+struct match_count {
+ struct parisc_driver * driver;
+ int count;
+};
+
+static int match_and_count(struct device * dev, void * data)
+{
+ struct match_count * m = data;
+ struct parisc_device * pdev = to_parisc_device(dev);
+
+ if (check_dev(dev)) {
+ if (match_device(m->driver, pdev))
+ m->count++;
+ }
+ return 0;
+}
+
/**
* count_parisc_driver - count # of devices this driver would match
* @driver: the PA-RISC driver to try
@@ -182,15 +208,14 @@ EXPORT_SYMBOL(register_parisc_driver);
*/
int count_parisc_driver(struct parisc_driver *driver)
{
- struct parisc_device *device;
- int cnt = 0;
+ struct match_count m = {
+ .driver = driver,
+ .count = 0,
+ };
- for_each_padev(device) {
- if (match_device(driver, device))
- cnt++;
- }
+ for_each_padev(match_and_count, &m);
- return cnt;
+ return m.count;
}
@@ -206,14 +231,34 @@ int unregister_parisc_driver(struct parisc_driver *driver)
}
EXPORT_SYMBOL(unregister_parisc_driver);
+struct find_data {
+ unsigned long hpa;
+ struct parisc_device * dev;
+};
+
+static int find_device(struct device * dev, void * data)
+{
+ struct parisc_device * pdev = to_parisc_device(dev);
+ struct find_data * d = (struct find_data*)data;
+
+ if (check_dev(dev)) {
+ if (pdev->hpa.start == d->hpa) {
+ d->dev = pdev;
+ return 1;
+ }
+ }
+ return 0;
+}
+
static struct parisc_device *find_device_by_addr(unsigned long hpa)
{
- struct parisc_device *dev;
- for_each_padev(dev) {
- if (dev->hpa == hpa)
- return dev;
- }
- return NULL;
+ struct find_data d = {
+ .hpa = hpa,
+ };
+ int ret;
+
+ ret = for_each_padev(find_device, &d);
+ return ret ? d.dev : NULL;
}
/**
@@ -387,6 +432,23 @@ struct parisc_device * create_tree_node(char id, struct device *parent)
return dev;
}
+struct match_id_data {
+ char id;
+ struct parisc_device * dev;
+};
+
+static int match_by_id(struct device * dev, void * data)
+{
+ struct parisc_device * pdev = to_parisc_device(dev);
+ struct match_id_data * d = data;
+
+ if (pdev->hw_path == d->id) {
+ d->dev = pdev;
+ return 1;
+ }
+ return 0;
+}
+
/**
* alloc_tree_node - returns a device entry in the iotree
* @parent: the parent node in the tree
@@ -397,15 +459,13 @@ struct parisc_device * create_tree_node(char id, struct device *parent)
*/
static struct parisc_device * alloc_tree_node(struct device *parent, char id)
{
- struct device *dev;
-
- list_for_each_entry(dev, &parent->children, node) {
- struct parisc_device *padev = to_parisc_device(dev);
- if (padev->hw_path == id)
- return padev;
- }
-
- return create_tree_node(id, parent);
+ struct match_id_data d = {
+ .id = id,
+ };
+ if (device_for_each_child(parent, &d, match_by_id))
+ return d.dev;
+ else
+ return create_tree_node(id, parent);
}
static struct parisc_device *create_parisc_device(struct hardware_path *modpath)
@@ -439,10 +499,8 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path)
dev = create_parisc_device(mod_path);
if (dev->id.hw_type != HPHW_FAULTY) {
- char p[64];
- print_pa_hwpath(dev, p);
printk("Two devices have hardware path %s. Please file a bug with HP.\n"
- "In the meantime, you could try rearranging your cards.\n", p);
+ "In the meantime, you could try rearranging your cards.\n", parisc_pathname(dev));
return NULL;
}
@@ -451,12 +509,27 @@ alloc_pa_dev(unsigned long hpa, struct hardware_path *mod_path)
dev->id.hversion_rev = iodc_data[1] & 0x0f;
dev->id.sversion = ((iodc_data[4] & 0x0f) << 16) |
(iodc_data[5] << 8) | iodc_data[6];
- dev->hpa = hpa;
+ dev->hpa.name = parisc_pathname(dev);
+ dev->hpa.start = hpa;
+ if (hpa == 0xf4000000 || hpa == 0xf6000000 ||
+ hpa == 0xf8000000 || hpa == 0xfa000000) {
+ dev->hpa.end = hpa + 0x01ffffff;
+ } else {
+ dev->hpa.end = hpa + 0xfff;
+ }
+ dev->hpa.flags = IORESOURCE_MEM;
name = parisc_hardware_description(&dev->id);
if (name) {
strlcpy(dev->name, name, sizeof(dev->name));
}
+ /* Silently fail things like mouse ports which are subsumed within
+ * the keyboard controller
+ */
+ if ((hpa & 0xfff) == 0 && insert_resource(&iomem_resource, &dev->hpa))
+ printk("Unable to claim HPA %lx for device %s\n",
+ hpa, name);
+
return dev;
}
@@ -555,6 +628,33 @@ static int match_parisc_device(struct device *dev, int index,
return (curr->hw_path == id);
}
+struct parse_tree_data {
+ int index;
+ struct hardware_path * modpath;
+ struct device * dev;
+};
+
+static int check_parent(struct device * dev, void * data)
+{
+ struct parse_tree_data * d = data;
+
+ if (check_dev(dev)) {
+ if (dev->bus == &parisc_bus_type) {
+ if (match_parisc_device(dev, d->index, d->modpath))
+ d->dev = dev;
+ } else if (is_pci_dev(dev)) {
+ if (match_pci_device(dev, d->index, d->modpath))
+ d->dev = dev;
+ } else if (dev->bus == NULL) {
+ /* we are on a bus bridge */
+ struct device *new = parse_tree_node(dev, d->index, d->modpath);
+ if (new)
+ d->dev = new;
+ }
+ }
+ return d->dev != NULL;
+}
+
/**
* parse_tree_node - returns a device entry in the iotree
* @parent: the parent node in the tree
@@ -568,24 +668,18 @@ static int match_parisc_device(struct device *dev, int index,
static struct device *
parse_tree_node(struct device *parent, int index, struct hardware_path *modpath)
{
- struct device *device;
-
- list_for_each_entry(device, &parent->children, node) {
- if (device->bus == &parisc_bus_type) {
- if (match_parisc_device(device, index, modpath))
- return device;
- } else if (is_pci_dev(device)) {
- if (match_pci_device(device, index, modpath))
- return device;
- } else if (device->bus == NULL) {
- /* we are on a bus bridge */
- struct device *new = parse_tree_node(device, index, modpath);
- if (new)
- return new;
- }
- }
+ struct parse_tree_data d = {
+ .index = index,
+ .modpath = modpath,
+ };
- return NULL;
+ struct recurse_struct recurse_data = {
+ .obj = &d,
+ .fn = check_parent,
+ };
+
+ device_for_each_child(parent, &recurse_data, descend_children);
+ return d.dev;
}
/**
@@ -636,7 +730,7 @@ EXPORT_SYMBOL(device_to_hwpath);
((dev->id.hw_type == HPHW_IOA) || (dev->id.hw_type == HPHW_BCPORT))
#define IS_LOWER_PORT(dev) \
- ((gsc_readl(dev->hpa + offsetof(struct bc_module, io_status)) \
+ ((gsc_readl(dev->hpa.start + offsetof(struct bc_module, io_status)) \
& BC_PORT_MASK) == BC_LOWER_PORT)
#define MAX_NATIVE_DEVICES 64
@@ -645,8 +739,8 @@ EXPORT_SYMBOL(device_to_hwpath);
#define FLEX_MASK F_EXTEND(0xfffc0000)
#define IO_IO_LOW offsetof(struct bc_module, io_io_low)
#define IO_IO_HIGH offsetof(struct bc_module, io_io_high)
-#define READ_IO_IO_LOW(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_LOW)
-#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa + IO_IO_HIGH)
+#define READ_IO_IO_LOW(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_LOW)
+#define READ_IO_IO_HIGH(dev) (unsigned long)(signed int)gsc_readl(dev->hpa.start + IO_IO_HIGH)
static void walk_native_bus(unsigned long io_io_low, unsigned long io_io_high,
struct device *parent);
@@ -655,10 +749,10 @@ void walk_lower_bus(struct parisc_device *dev)
{
unsigned long io_io_low, io_io_high;
- if(!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev))
+ if (!BUS_CONVERTER(dev) || IS_LOWER_PORT(dev))
return;
- if(dev->id.hw_type == HPHW_IOA) {
+ if (dev->id.hw_type == HPHW_IOA) {
io_io_low = (unsigned long)(signed int)(READ_IO_IO_LOW(dev) << 16);
io_io_high = io_io_low + MAX_NATIVE_DEVICES * NATIVE_DEVICE_OFFSET;
} else {
@@ -731,7 +825,7 @@ static void print_parisc_device(struct parisc_device *dev)
print_pa_hwpath(dev, hw_path);
printk(KERN_INFO "%d. %s at 0x%lx [%s] { %d, 0x%x, 0x%.3x, 0x%.5x }",
- ++count, dev->name, dev->hpa, hw_path, dev->id.hw_type,
+ ++count, dev->name, dev->hpa.start, hw_path, dev->id.hw_type,
dev->id.hversion_rev, dev->id.hversion, dev->id.sversion);
if (dev->num_addrs) {
@@ -753,13 +847,20 @@ void init_parisc_bus(void)
get_device(&root);
}
+
+static int print_one_device(struct device * dev, void * data)
+{
+ struct parisc_device * pdev = to_parisc_device(dev);
+
+ if (check_dev(dev))
+ print_parisc_device(pdev);
+ return 0;
+}
+
/**
* print_parisc_devices - Print out a list of devices found in this system
*/
void print_parisc_devices(void)
{
- struct parisc_device *dev;
- for_each_padev(dev) {
- print_parisc_device(dev);
- }
+ for_each_padev(print_one_device, NULL);
}
diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S
index be0f07f2fa58..c7e66ee5b083 100644
--- a/arch/parisc/kernel/entry.S
+++ b/arch/parisc/kernel/entry.S
@@ -30,14 +30,14 @@
* - save registers to kernel stack and handle in assembly or C */
+#include
#include /* for LDREG/STREG defines */
#include
-#include
#include
#include
#include
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
#define CMPIB cmpib,*
#define CMPB cmpb,*
#define COND(x) *x
@@ -67,19 +67,22 @@
/* Switch to virtual mapping, trashing only %r1 */
.macro virt_map
- rsm PSW_SM_Q,%r0
- tovirt_r1 %r29
- mfsp %sr7, %r1
- or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */
- mtsp %r1, %sr3
+ /* pcxt_ssm_bug */
+ rsm PSW_SM_I, %r0 /* barrier for "Relied upon Translation */
mtsp %r0, %sr4
mtsp %r0, %sr5
+ mfsp %sr7, %r1
+ or,= %r0,%r1,%r0 /* Only save sr7 in sr3 if sr7 != 0 */
+ mtsp %r1, %sr3
+ tovirt_r1 %r29
+ load32 KERNEL_PSW, %r1
+
+ rsm PSW_SM_QUIET,%r0 /* second "heavy weight" ctl op */
mtsp %r0, %sr6
mtsp %r0, %sr7
- load32 KERNEL_PSW, %r1
- mtctl %r1, %cr22
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
+ mtctl %r1, %ipsw
load32 4f, %r1
mtctl %r1, %cr18 /* Set IIAOQ tail */
ldo 4(%r1), %r1
@@ -214,7 +217,7 @@
va = r8 /* virtual address for which the trap occured */
spc = r24 /* space for which the trap occured */
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
/*
* itlb miss interruption handler (parisc 1.1 - 32 bit)
@@ -236,7 +239,7 @@
.macro itlb_20 code
mfctl %pcsq, spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
b itlb_miss_20w
#else
b itlb_miss_20
@@ -246,7 +249,7 @@
.align 32
.endm
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
/*
* naitlb miss interruption handler (parisc 1.1 - 32 bit)
*
@@ -283,7 +286,7 @@
.macro naitlb_20 code
mfctl %isr,spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
b itlb_miss_20w
#else
b itlb_miss_20
@@ -296,7 +299,7 @@
.align 32
.endm
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
/*
* dtlb miss interruption handler (parisc 1.1 - 32 bit)
*/
@@ -318,7 +321,7 @@
.macro dtlb_20 code
mfctl %isr, spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
b dtlb_miss_20w
#else
b dtlb_miss_20
@@ -328,7 +331,7 @@
.align 32
.endm
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
/* nadtlb miss interruption handler (parisc 1.1 - 32 bit) */
.macro nadtlb_11 code
@@ -346,7 +349,7 @@
.macro nadtlb_20 code
mfctl %isr,spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
b nadtlb_miss_20w
#else
b nadtlb_miss_20
@@ -356,7 +359,7 @@
.align 32
.endm
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
/*
* dirty bit trap interruption handler (parisc 1.1 - 32 bit)
*/
@@ -378,7 +381,7 @@
.macro dbit_20 code
mfctl %isr,spc
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
b dbit_trap_20w
#else
b dbit_trap_20
@@ -391,7 +394,7 @@
/* The following are simple 32 vs 64 bit instruction
* abstractions for the macros */
.macro EXTR reg1,start,length,reg2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
extrd,u \reg1,32+\start,\length,\reg2
#else
extrw,u \reg1,\start,\length,\reg2
@@ -399,7 +402,7 @@
.endm
.macro DEP reg1,start,length,reg2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depd \reg1,32+\start,\length,\reg2
#else
depw \reg1,\start,\length,\reg2
@@ -407,7 +410,7 @@
.endm
.macro DEPI val,start,length,reg
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi \val,32+\start,\length,\reg
#else
depwi \val,\start,\length,\reg
@@ -418,7 +421,7 @@
* fault. We have to extract this and place it in the va,
* zeroing the corresponding bits in the space register */
.macro space_adjust spc,va,tmp
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
extrd,u \spc,63,SPACEID_SHIFT,\tmp
depd %r0,63,SPACEID_SHIFT,\spc
depd \tmp,31,SPACEID_SHIFT,\va
@@ -476,7 +479,7 @@
bb,>=,n \pmd,_PxD_PRESENT_BIT,\fault
DEP %r0,31,PxD_FLAG_SHIFT,\pmd /* clear flags */
copy \pmd,%r9
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
shld %r9,PxD_VALUE_SHIFT,\pmd
#else
shlw %r9,PxD_VALUE_SHIFT,\pmd
@@ -607,7 +610,7 @@
.macro do_alias spc,tmp,tmp1,va,pte,prot,fault
cmpib,COND(<>),n 0,\spc,\fault
ldil L%(TMPALIAS_MAP_START),\tmp
-#if defined(__LP64__) && (TMPALIAS_MAP_START >= 0x80000000)
+#if defined(CONFIG_64BIT) && (TMPALIAS_MAP_START >= 0x80000000)
/* on LP64, ldi will sign extend into the upper 32 bits,
* which is behaviour we don't want */
depdi 0,31,32,\tmp
@@ -621,7 +624,7 @@
* OK, it is in the temp alias region, check whether "from" or "to".
* Check "subtle" note in pacache.S re: r23/r26.
*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
extrd,u,*= \va,41,1,%r0
#else
extrw,u,= \va,9,1,%r0
@@ -688,7 +691,7 @@ fault_vector_20:
def 30
def 31
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
.export fault_vector_11
@@ -761,7 +764,7 @@ __kernel_thread:
copy %r30, %r1
ldo PT_SZ_ALGN(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* Yo, function pointers in wide mode are little structs... -PB */
ldd 24(%r26), %r2
STREG %r2, PT_GR27(%r1) /* Store childs %dp */
@@ -777,7 +780,7 @@ __kernel_thread:
or %r26, %r24, %r26 /* will have kernel mappings. */
ldi 1, %r25 /* stack_start, signals kernel thread */
stw %r0, -52(%r30) /* user_tid */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
BL do_fork, %r2
@@ -806,7 +809,7 @@ ret_from_kernel_thread:
LDREG TI_TASK-THREAD_SZ_ALGN(%r30), %r1
LDREG TASK_PT_GR25(%r1), %r26
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
LDREG TASK_PT_GR27(%r1), %r27
LDREG TASK_PT_GR22(%r1), %r22
#endif
@@ -814,11 +817,16 @@ ret_from_kernel_thread:
ble 0(%sr7, %r1)
copy %r31, %r2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
loadgp /* Thread could have been in a module */
#endif
+#ifndef CONFIG_64BIT
b sys_exit
+#else
+ load32 sys_exit, %r1
+ bv %r0(%r1)
+#endif
ldi 0, %r26
.import sys_execve, code
@@ -830,7 +838,7 @@ __execve:
STREG %r26, PT_GR26(%r16)
STREG %r25, PT_GR25(%r16)
STREG %r24, PT_GR24(%r16)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
BL sys_execve, %r2
@@ -855,6 +863,7 @@ __execve:
_switch_to:
STREG %r2, -RP_OFFSET(%r30)
+ callee_save_float
callee_save
load32 _switch_to_ret, %r2
@@ -871,6 +880,7 @@ _switch_to:
_switch_to_ret:
mtctl %r0, %cr0 /* Needed for single stepping */
callee_rest
+ callee_rest_float
LDREG -RP_OFFSET(%r30), %r2
bv %r0(%r2)
@@ -888,9 +898,6 @@ _switch_to_ret:
* this way, then we will need to copy %sr3 in to PT_SR[3..7], and
* adjust IASQ[0..1].
*
- * Note that the following code uses a "relied upon translation".
- * See the parisc ACD for details. The ssm is necessary due to a
- * PCXT bug.
*/
.align 4096
@@ -911,7 +918,7 @@ syscall_exit_rfi:
STREG %r19,PT_IAOQ1(%r16)
LDREG PT_PSW(%r16),%r19
load32 USER_PSW_MASK,%r1
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
load32 USER_PSW_HI_MASK,%r20
depd %r20,31,32,%r1
#endif
@@ -955,7 +962,7 @@ intr_return:
/* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) amount
** irq_stat[] is defined using ____cacheline_aligned.
*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
shld %r1, 6, %r20
#else
shlw %r1, 5, %r20
@@ -963,9 +970,6 @@ intr_return:
add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */
#endif /* CONFIG_SMP */
- LDREG IRQSTAT_SIRQ_PEND(%r19),%r20 /* hardirq.h: unsigned long */
- cmpib,<>,n 0,%r20,intr_do_softirq /* forward */
-
intr_check_resched:
/* check for reschedule */
@@ -985,24 +989,19 @@ intr_restore:
rest_fp %r1
rest_general %r29
- /* Create a "relied upon translation" PA 2.0 Arch. F-5 */
- ssm 0,%r0
- nop
- nop
- nop
- nop
- nop
- nop
- nop
+ /* inverse of virt_map */
+ pcxt_ssm_bug
+ rsm PSW_SM_QUIET,%r0 /* prepare for rfi */
tophys_r1 %r29
- rsm (PSW_SM_Q|PSW_SM_P|PSW_SM_D|PSW_SM_I),%r0
/* Restore space id's and special cr's from PT_REGS
- * structure pointed to by r29 */
+ * structure pointed to by r29
+ */
rest_specials %r29
- /* Important: Note that rest_stack restores r29
- * last (we are using it)! It also restores r1 and r30. */
+ /* IMPORTANT: rest_stack restores r29 last (we are using it)!
+ * It also restores r1 and r30.
+ */
rest_stack
rfi
@@ -1015,17 +1014,6 @@ intr_restore:
nop
nop
- .import do_softirq,code
-intr_do_softirq:
- bl do_softirq,%r2
-#ifdef __LP64__
- ldo -16(%r30),%r29 /* Reference param save area */
-#else
- nop
-#endif
- b intr_check_resched
- nop
-
.import schedule,code
intr_do_resched:
/* Only do reschedule if we are returning to user space */
@@ -1036,12 +1024,17 @@ intr_do_resched:
CMPIB= 0,%r20,intr_restore /* backward */
nop
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
ldil L%intr_check_sig, %r2
+#ifndef CONFIG_64BIT
b schedule
+#else
+ load32 schedule, %r20
+ bv %r0(%r20)
+#endif
ldo R%intr_check_sig(%r2), %r2
@@ -1064,7 +1057,7 @@ intr_do_signal:
copy %r0, %r24 /* unsigned long in_syscall */
copy %r16, %r25 /* struct pt_regs *regs */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
@@ -1088,7 +1081,7 @@ intr_extint:
mfctl %cr31,%r1
copy %r30,%r17
/* FIXME! depi below has hardcoded idea of interrupt stack size (32k)*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi 0,63,15,%r17
#else
depi 0,31,15,%r17
@@ -1115,7 +1108,7 @@ intr_extint:
ldil L%intr_return, %r2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
@@ -1153,15 +1146,17 @@ intr_save:
CMPIB=,n 6,%r26,skip_save_ior
- /* save_specials left ipsw value in r8 for us to test */
mfctl %cr20, %r16 /* isr */
+ nop /* serialize mfctl on PA 2.0 to avoid 4 cycle penalty */
mfctl %cr21, %r17 /* ior */
-#ifdef __LP64__
+
+#ifdef CONFIG_64BIT
/*
* If the interrupted code was running with W bit off (32 bit),
* clear the b bits (bits 0 & 1) in the ior.
+ * save_specials left ipsw value in r8 for us to test.
*/
extrd,u,*<> %r8,PSW_W_BIT,1,%r0
depdi 0,1,2,%r17
@@ -1192,7 +1187,7 @@ skip_save_ior:
loadgp
copy %r29, %r25 /* arg1 is pt_regs */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
@@ -1230,7 +1225,7 @@ skip_save_ior:
spc = r24 /* space for which the trap occured */
ptp = r25 /* page directory/page table pointer */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
dtlb_miss_20w:
space_adjust spc,va,t0
@@ -1487,10 +1482,10 @@ nadtlb_emulate:
add,l %r1,%r24,%r1 /* doesn't affect c/b bits */
nadtlb_nullify:
- mfctl %cr22,%r8 /* Get ipsw */
+ mfctl %ipsw,%r8
ldil L%PSW_N,%r9
or %r8,%r9,%r8 /* Set PSW_N */
- mtctl %r8,%cr22
+ mtctl %r8,%ipsw
rfir
nop
@@ -1521,7 +1516,7 @@ nadtlb_probe_check:
nop
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
itlb_miss_20w:
/*
@@ -1588,7 +1583,7 @@ itlb_miss_20:
#endif
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
dbit_trap_20w:
space_adjust spc,va,t0
@@ -1797,7 +1792,7 @@ sys_fork_wrapper:
STREG %r2,-RP_OFFSET(%r30)
ldo FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
@@ -1847,7 +1842,7 @@ sys_clone_wrapper:
STREG %r2,-RP_OFFSET(%r30)
ldo FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
@@ -1869,7 +1864,7 @@ sys_vfork_wrapper:
STREG %r2,-RP_OFFSET(%r30)
ldo FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
@@ -1897,10 +1892,10 @@ sys_vfork_wrapper:
STREG %r2,-RP_OFFSET(%r30)
ldo FRAME_SIZE(%r30),%r30
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
- bl \execve,%r2
+ BL \execve,%r2
copy %r1,%arg0
ldo -FRAME_SIZE(%r30),%r30
@@ -1923,7 +1918,7 @@ error_\execve:
sys_execve_wrapper:
execve_wrapper sys_execve
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
.export sys32_execve_wrapper
.import sys32_execve
@@ -1937,7 +1932,7 @@ sys_rt_sigreturn_wrapper:
ldo TASK_REGS(%r26),%r26 /* get pt regs */
/* Don't save regs, we are going to restore them from sigcontext. */
STREG %r2, -RP_OFFSET(%r30)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo FRAME_SIZE(%r30), %r30
BL sys_rt_sigreturn,%r2
ldo -16(%r30),%r29 /* Reference param save area */
@@ -1968,7 +1963,7 @@ sys_sigaltstack_wrapper:
ldo TASK_REGS(%r1),%r24 /* get pt regs */
LDREG TASK_PT_GR30(%r24),%r24
STREG %r2, -RP_OFFSET(%r30)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo FRAME_SIZE(%r30), %r30
b,l do_sigaltstack,%r2
ldo -16(%r30),%r29 /* Reference param save area */
@@ -1982,7 +1977,7 @@ sys_sigaltstack_wrapper:
bv %r0(%r2)
nop
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
.export sys32_sigaltstack_wrapper
sys32_sigaltstack_wrapper:
/* Get the user stack pointer */
@@ -2006,7 +2001,7 @@ sys_rt_sigsuspend_wrapper:
reg_save %r24
STREG %r2, -RP_OFFSET(%r30)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo FRAME_SIZE(%r30), %r30
b,l sys_rt_sigsuspend,%r2
ldo -16(%r30),%r29 /* Reference param save area */
@@ -2079,7 +2074,7 @@ syscall_check_bh:
ldw TI_CPU-THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r26 /* cpu # */
/* shift left ____cacheline_aligned (aka L1_CACHE_BYTES) bits */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
shld %r26, 6, %r20
#else
shlw %r26, 5, %r20
@@ -2087,9 +2082,6 @@ syscall_check_bh:
add %r19,%r20,%r19 /* now have &irq_stat[smp_processor_id()] */
#endif /* CONFIG_SMP */
- LDREG IRQSTAT_SIRQ_PEND(%r19),%r20 /* hardirq.h: unsigned long */
- cmpib,<>,n 0,%r20,syscall_do_softirq /* forward */
-
syscall_check_resched:
/* check for reschedule */
@@ -2144,7 +2136,7 @@ syscall_restore:
depi 3,31,2,%r31 /* ensure return to user mode. */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* decide whether to reset the wide mode bit
*
* For a syscall, the W bit is stored in the lowest bit
@@ -2227,20 +2219,10 @@ pt_regs_ok:
b intr_restore
nop
- .import do_softirq,code
-syscall_do_softirq:
- bl do_softirq,%r2
- nop
- /* NOTE: We enable I-bit incase we schedule later,
- * and we might be going back to userspace if we were
- * traced. */
- b syscall_check_resched
- ssm PSW_SM_I, %r0 /* do_softirq returns with I bit off */
-
.import schedule,code
syscall_do_resched:
BL schedule,%r2
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#else
nop
@@ -2260,7 +2242,7 @@ syscall_do_signal:
ldi 1, %r24 /* unsigned long in_syscall */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
BL do_signal,%r2
diff --git a/arch/parisc/kernel/firmware.c b/arch/parisc/kernel/firmware.c
index f244fb200db1..553f8fe03224 100644
--- a/arch/parisc/kernel/firmware.c
+++ b/arch/parisc/kernel/firmware.c
@@ -83,15 +83,15 @@ static unsigned long pdc_result2[32] __attribute__ ((aligned (8)));
int parisc_narrow_firmware = 1;
#endif
-/* on all currently-supported platforms, IODC I/O calls are always
- * 32-bit calls, and MEM_PDC calls are always the same width as the OS.
- * This means Cxxx boxes can't run wide kernels right now. -PB
+/* On most currently-supported platforms, IODC I/O calls are 32-bit calls
+ * and MEM_PDC calls are always the same width as the OS.
+ * Some PAT boxes may have 64-bit IODC I/O.
*
- * CONFIG_PDC_NARROW has been added to allow 64-bit kernels to run on
- * systems with 32-bit MEM_PDC calls. This will allow wide kernels to
- * run on Cxxx boxes now. -RB
- *
- * Note that some PAT boxes may have 64-bit IODC I/O...
+ * Ryan Bradetich added the now obsolete CONFIG_PDC_NARROW to allow
+ * 64-bit kernels to run on systems with 32-bit MEM_PDC calls.
+ * This allowed wide kernels to run on Cxxx boxes.
+ * We now detect 32-bit-only PDC and dynamically switch to 32-bit mode
+ * when running a 64-bit kernel on such boxes (e.g. C200 or C360).
*/
#ifdef __LP64__
diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S
index 28405edf8448..0b47afc20690 100644
--- a/arch/parisc/kernel/head.S
+++ b/arch/parisc/kernel/head.S
@@ -12,7 +12,7 @@
* Initial Version 04-23-1999 by Helge Deller
*/
-#include /* for CONFIG_SMP */
+#include /* for CONFIG_SMP */
#include
#include
@@ -36,10 +36,10 @@ boot_args:
.align 4
.import init_thread_union,data
.import fault_vector_20,code /* IVA parisc 2.0 32 bit */
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
.import fault_vector_11,code /* IVA parisc 1.1 32 bit */
.import $global$ /* forward declaration */
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
.export stext
.export _stext,data /* Kernel want it this way! */
_stext:
@@ -76,7 +76,7 @@ $bss_loop:
mtctl %r4,%cr24 /* Initialize kernel root pointer */
mtctl %r4,%cr25 /* Initialize user root pointer */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* Set pmd in pgd */
load32 PA(pmd0),%r5
shrd %r5,PxD_VALUE_SHIFT,%r3
@@ -99,7 +99,7 @@ $bss_loop:
stw %r3,0(%r4)
ldo (ASM_PAGE_SIZE >> PxD_VALUE_SHIFT)(%r3),%r3
addib,> -1,%r1,1b
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo ASM_PMD_ENTRY_SIZE(%r4),%r4
#else
ldo ASM_PGD_ENTRY_SIZE(%r4),%r4
@@ -170,7 +170,7 @@ common_stext:
stw %r0,0x28(%r0) /* MEM_RENDEZ_HI */
#endif /*CONFIG_SMP*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
tophys_r1 %sp
/* Save the rfi target address */
@@ -224,8 +224,6 @@ stext_pdc_ret:
mtctl %r0,%cr12
mtctl %r0,%cr13
- /* Prepare to RFI! Man all the cannons! */
-
/* Initialize the global data pointer */
loadgp
@@ -235,7 +233,7 @@ stext_pdc_ret:
* following short sequence of instructions can determine this
* (without being illegal on a PA1.1 machine).
*/
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
ldi 32,%r10
mtctl %r10,%cr11
.level 2.0
@@ -248,52 +246,22 @@ stext_pdc_ret:
$is_pa20:
.level LEVEL /* restore 1.1 || 2.0w */
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
load32 PA(fault_vector_20),%r10
$install_iva:
mtctl %r10,%cr14
-#ifdef __LP64__
- b aligned_rfi
+ b aligned_rfi /* Prepare to RFI! Man all the cannons! */
nop
- .align 256
+ .align 128
aligned_rfi:
- ssm 0,0
- nop /* 1 */
- nop /* 2 */
- nop /* 3 */
- nop /* 4 */
- nop /* 5 */
- nop /* 6 */
- nop /* 7 */
- nop /* 8 */
-#endif
+ pcxt_ssm_bug
-#ifdef __LP64__ /* move to psw.h? */
-#define PSW_BITS PSW_Q+PSW_I+PSW_D+PSW_P+PSW_R
-#else
-#define PSW_BITS PSW_SM_Q
-#endif
+ rsm PSW_SM_QUIET,%r0 /* off troublesome PSW bits */
+ /* Don't need NOPs, have 8 compliant insn before rfi */
-$rfi:
- /* turn off troublesome PSW bits */
- rsm PSW_BITS,%r0
-
- /* kernel PSW:
- * - no interruptions except HPMC and TOC (which are handled by PDC)
- * - Q bit set (IODC / PDC interruptions)
- * - big-endian
- * - virtually mapped
- */
- load32 KERNEL_PSW,%r10
- mtctl %r10,%ipsw
-
- /* Set the space pointers for the post-RFI world
- ** Clear the two-level IIA Space Queue, effectively setting
- ** Kernel space.
- */
mtctl %r0,%cr17 /* Clear IIASQ tail */
mtctl %r0,%cr17 /* Clear IIASQ head */
@@ -301,8 +269,11 @@ $rfi:
mtctl %r11,%cr18 /* IIAOQ head */
ldo 4(%r11),%r11
mtctl %r11,%cr18 /* IIAOQ tail */
+
+ load32 KERNEL_PSW,%r10
+ mtctl %r10,%ipsw
- /* Jump to hyperspace */
+ /* Jump through hyperspace to Virt Mode */
rfi
nop
@@ -313,7 +284,7 @@ $rfi:
.import smp_init_current_idle_task,data
.import smp_callin,code
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
smp_callin_rtn:
.proc
.callinfo
@@ -321,7 +292,7 @@ smp_callin_rtn:
nop
nop
.procend
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
/***************************************************************************
* smp_slave_stext is executed by all non-monarch Processors when the Monarch
@@ -356,7 +327,7 @@ smp_slave_stext:
mtctl %r4,%cr24 /* Initialize kernel root pointer */
mtctl %r4,%cr25 /* Initialize user root pointer */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* Setup PDCE_PROC entry */
copy %arg0,%r3
#else
@@ -373,7 +344,7 @@ smp_slave_stext:
.procend
#endif /* CONFIG_SMP */
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
.data
.align 4
@@ -383,4 +354,4 @@ smp_slave_stext:
.size $global$,4
$global$:
.word 0
-#endif /*!LP64*/
+#endif /*!CONFIG_64BIT*/
diff --git a/arch/parisc/kernel/ioctl32.c b/arch/parisc/kernel/ioctl32.c
index 1d3824b670d1..8cad8f004f00 100644
--- a/arch/parisc/kernel/ioctl32.c
+++ b/arch/parisc/kernel/ioctl32.c
@@ -104,12 +104,9 @@ static int drm32_version(unsigned int fd, unsigned int cmd, unsigned long arg)
}
out:
- if (kversion.name)
- kfree(kversion.name);
- if (kversion.date)
- kfree(kversion.date);
- if (kversion.desc)
- kfree(kversion.desc);
+ kfree(kversion.name);
+ kfree(kversion.date);
+ kfree(kversion.desc);
return ret;
}
@@ -166,9 +163,7 @@ static int drm32_getsetunique(unsigned int fd, unsigned int cmd, unsigned long a
ret = -EFAULT;
}
- if (karg.unique != NULL)
- kfree(karg.unique);
-
+ kfree(karg.unique);
return ret;
}
@@ -265,7 +260,6 @@ static int drm32_info_bufs(unsigned int fd, unsigned int cmd, unsigned long arg)
}
kfree(karg.list);
-
return ret;
}
@@ -305,7 +299,6 @@ static int drm32_free_bufs(unsigned int fd, unsigned int cmd, unsigned long arg)
out:
kfree(karg.list);
-
return ret;
}
@@ -494,15 +487,10 @@ static int drm32_dma(unsigned int fd, unsigned int cmd, unsigned long arg)
}
out:
- if (karg.send_indices)
- kfree(karg.send_indices);
- if (karg.send_sizes)
- kfree(karg.send_sizes);
- if (karg.request_indices)
- kfree(karg.request_indices);
- if (karg.request_sizes)
- kfree(karg.request_sizes);
-
+ kfree(karg.send_indices);
+ kfree(karg.send_sizes);
+ kfree(karg.request_indices);
+ kfree(karg.request_sizes);
return ret;
}
@@ -555,9 +543,7 @@ static int drm32_res_ctx(unsigned int fd, unsigned int cmd, unsigned long arg)
ret = -EFAULT;
}
- if (karg.contexts)
- kfree(karg.contexts);
-
+ kfree(karg.contexts);
return ret;
}
diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S
index 77e03bc0f935..9534ee17b9be 100644
--- a/arch/parisc/kernel/pacache.S
+++ b/arch/parisc/kernel/pacache.S
@@ -26,7 +26,7 @@
* can be used.
*/
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
#define ADDIB addib,*
#define CMPB cmpb,*
#define ANDCM andcm,*
@@ -40,8 +40,10 @@
.level 2.0
#endif
-#include
+#include
+
#include
+#include
#include
#include
@@ -62,32 +64,23 @@ flush_tlb_all_local:
* to happen in real mode with all interruptions disabled.
*/
- /*
- * Once again, we do the rfi dance ... some day we need examine
- * all of our uses of this type of code and see what can be
- * consolidated.
- */
+ /* pcxt_ssm_bug - relied upon translation! PA 2.0 Arch. F-4 and F-5 */
+ rsm PSW_SM_I, %r19 /* save I-bit state */
+ load32 PA(1f), %r1
+ nop
+ nop
+ nop
+ nop
+ nop
- rsm PSW_SM_I, %r19 /* relied upon translation! PA 2.0 Arch. F-5 */
- nop
- nop
- nop
- nop
- nop
- nop
- nop
-
- rsm PSW_SM_Q, %r0 /* Turn off Q bit to load iia queue */
- ldil L%REAL_MODE_PSW, %r1
- ldo R%REAL_MODE_PSW(%r1), %r1
- mtctl %r1, %cr22
+ rsm PSW_SM_Q, %r0 /* prep to load iia queue */
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
- ldil L%PA(1f), %r1
- ldo R%PA(1f)(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ head */
ldo 4(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ tail */
+ load32 REAL_MODE_PSW, %r1
+ mtctl %r1, %ipsw
rfi
nop
@@ -178,29 +171,36 @@ fdtonemiddle: /* Loop if LOOP = 1 */
ADDIB> -1, %r22, fdtoneloop /* Outer loop count decr */
add %r21, %r20, %r20 /* increment space */
+
fdtdone:
+ /*
+ * Switch back to virtual mode
+ */
+ /* pcxt_ssm_bug */
+ rsm PSW_SM_I, %r0
+ load32 2f, %r1
+ nop
+ nop
+ nop
+ nop
+ nop
- /* Switch back to virtual mode */
-
- rsm PSW_SM_Q, %r0 /* clear Q bit to load iia queue */
- ldil L%KERNEL_PSW, %r1
- ldo R%KERNEL_PSW(%r1), %r1
- or %r1, %r19, %r1 /* Set I bit if set on entry */
- mtctl %r1, %cr22
+ rsm PSW_SM_Q, %r0 /* prep to load iia queue */
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
- ldil L%(2f), %r1
- ldo R%(2f)(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ head */
ldo 4(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ tail */
+ load32 KERNEL_PSW, %r1
+ or %r1, %r19, %r1 /* I-bit to state on entry */
+ mtctl %r1, %ipsw /* restore I-bit (entire PSW) */
rfi
nop
2: bv %r0(%r2)
nop
- .exit
+ .exit
.procend
.export flush_instruction_cache_local,code
@@ -227,7 +227,7 @@ flush_instruction_cache_local:
fimanyloop: /* Loop if LOOP >= 2 */
ADDIB> -1, %r31, fimanyloop /* Adjusted inner loop decr */
- fice 0(%sr1, %arg0)
+ fice %r0(%sr1, %arg0)
fice,m %arg1(%sr1, %arg0) /* Last fice and addr adjust */
movb,tr %arg3, %r31, fimanyloop /* Re-init inner loop count */
ADDIB<=,n -1, %arg2, fisync /* Outer loop decr */
@@ -238,7 +238,7 @@ fioneloop: /* Loop if LOOP = 1 */
fisync:
sync
- mtsm %r22
+ mtsm %r22 /* restore I-bit */
bv %r0(%r2)
nop
.exit
@@ -269,7 +269,7 @@ flush_data_cache_local:
fdmanyloop: /* Loop if LOOP >= 2 */
ADDIB> -1, %r31, fdmanyloop /* Adjusted inner loop decr */
- fdce 0(%sr1, %arg0)
+ fdce %r0(%sr1, %arg0)
fdce,m %arg1(%sr1, %arg0) /* Last fdce and addr adjust */
movb,tr %arg3, %r31, fdmanyloop /* Re-init inner loop count */
ADDIB<=,n -1, %arg2, fdsync /* Outer loop decr */
@@ -281,7 +281,7 @@ fdoneloop: /* Loop if LOOP = 1 */
fdsync:
syncdma
sync
- mtsm %r22
+ mtsm %r22 /* restore I-bit */
bv %r0(%r2)
nop
.exit
@@ -296,7 +296,7 @@ copy_user_page_asm:
.callinfo NO_CALLS
.entry
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* PA8x00 CPUs can consume 2 loads or 1 store per cycle.
* Unroll the loop by hand and arrange insn appropriately.
* GCC probably can do this just as well.
@@ -351,7 +351,11 @@ copy_user_page_asm:
std %r22, 120(%r26)
ldo 128(%r26), %r26
- ADDIB> -1, %r1, 1b /* bundle 10 */
+ /* conditional branches nullify on forward taken branch, and on
+ * non-taken backward branch. Note that .+4 is a backwards branch.
+ * The ldd should only get executed if the branch is taken.
+ */
+ ADDIB>,n -1, %r1, 1b /* bundle 10 */
ldd 0(%r25), %r19 /* start next loads */
#else
@@ -363,10 +367,10 @@ copy_user_page_asm:
* the full 64 bit register values on interrupt, we can't
* use ldd/std on a 32 bit kernel.
*/
+ ldw 0(%r25), %r19
ldi 64, %r1 /* PAGE_SIZE/64 == 64 */
1:
- ldw 0(%r25), %r19
ldw 4(%r25), %r20
ldw 8(%r25), %r21
ldw 12(%r25), %r22
@@ -396,11 +400,12 @@ copy_user_page_asm:
ldw 60(%r25), %r22
stw %r19, 48(%r26)
stw %r20, 52(%r26)
+ ldo 64(%r25), %r25
stw %r21, 56(%r26)
stw %r22, 60(%r26)
ldo 64(%r26), %r26
- ADDIB> -1, %r1, 1b
- ldo 64(%r25), %r25
+ ADDIB>,n -1, %r1, 1b
+ ldw 0(%r25), %r19
#endif
bv %r0(%r2)
nop
@@ -456,7 +461,7 @@ copy_user_page_asm:
sub %r25, %r1, %r23 /* move physical addr into non shadowed reg */
ldil L%(TMPALIAS_MAP_START), %r28
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
extrd,u %r26,56,32, %r26 /* convert phys addr to tlb insert format */
extrd,u %r23,56,32, %r23 /* convert phys addr to tlb insert format */
depd %r24,63,22, %r28 /* Form aliased virtual address 'to' */
@@ -543,7 +548,7 @@ __clear_user_page_asm:
tophys_r1 %r26
ldil L%(TMPALIAS_MAP_START), %r28
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
#if (TMPALIAS_MAP_START >= 0x80000000)
depdi 0, 31,32, %r28 /* clear any sign extension */
#endif
@@ -560,7 +565,7 @@ __clear_user_page_asm:
pdtlb 0(%r28)
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldi 32, %r1 /* PAGE_SIZE/128 == 32 */
/* PREFETCH (Write) has not (yet) been proven to help here */
@@ -585,7 +590,7 @@ __clear_user_page_asm:
ADDIB> -1, %r1, 1b
ldo 128(%r28), %r28
-#else /* ! __LP64 */
+#else /* ! CONFIG_64BIT */
ldi 64, %r1 /* PAGE_SIZE/64 == 64 */
@@ -608,7 +613,7 @@ __clear_user_page_asm:
stw %r0, 60(%r28)
ADDIB> -1, %r1, 1b
ldo 64(%r28), %r28
-#endif /* __LP64 */
+#endif /* CONFIG_64BIT */
bv %r0(%r2)
nop
@@ -626,7 +631,7 @@ flush_kernel_dcache_page:
ldil L%dcache_stride, %r1
ldw R%dcache_stride(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi,z 1, 63-PAGE_SHIFT,1, %r25
#else
depwi,z 1, 31-PAGE_SHIFT,1, %r25
@@ -670,7 +675,7 @@ flush_user_dcache_page:
ldil L%dcache_stride, %r1
ldw R%dcache_stride(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi,z 1,63-PAGE_SHIFT,1, %r25
#else
depwi,z 1,31-PAGE_SHIFT,1, %r25
@@ -714,7 +719,7 @@ flush_user_icache_page:
ldil L%dcache_stride, %r1
ldw R%dcache_stride(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi,z 1, 63-PAGE_SHIFT,1, %r25
#else
depwi,z 1, 31-PAGE_SHIFT,1, %r25
@@ -759,7 +764,7 @@ purge_kernel_dcache_page:
ldil L%dcache_stride, %r1
ldw R%dcache_stride(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi,z 1, 63-PAGE_SHIFT,1, %r25
#else
depwi,z 1, 31-PAGE_SHIFT,1, %r25
@@ -807,7 +812,7 @@ flush_alias_page:
tophys_r1 %r26
ldil L%(TMPALIAS_MAP_START), %r28
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
extrd,u %r26, 56,32, %r26 /* convert phys addr to tlb insert format */
depd %r25, 63,22, %r28 /* Form aliased virtual address 'to' */
depdi 0, 63,12, %r28 /* Clear any offset bits */
@@ -824,7 +829,7 @@ flush_alias_page:
ldil L%dcache_stride, %r1
ldw R%dcache_stride(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi,z 1, 63-PAGE_SHIFT,1, %r29
#else
depwi,z 1, 31-PAGE_SHIFT,1, %r29
@@ -935,7 +940,7 @@ flush_kernel_icache_page:
ldil L%icache_stride, %r1
ldw R%icache_stride(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
depdi,z 1, 63-PAGE_SHIFT,1, %r25
#else
depwi,z 1, 31-PAGE_SHIFT,1, %r25
@@ -944,23 +949,23 @@ flush_kernel_icache_page:
sub %r25, %r23, %r25
-1: fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
- fic,m %r23(%r26)
+1: fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
+ fic,m %r23(%sr4, %r26)
CMPB<< %r26, %r25, 1b
- fic,m %r23(%r26)
+ fic,m %r23(%sr4, %r26)
sync
bv %r0(%r2)
@@ -982,17 +987,18 @@ flush_kernel_icache_range_asm:
ANDCM %r26, %r21, %r26
1: CMPB<<,n %r26, %r25, 1b
- fic,m %r23(%r26)
+ fic,m %r23(%sr4, %r26)
sync
bv %r0(%r2)
nop
.exit
-
.procend
- .align 128
-
+ /* align should cover use of rfi in disable_sr_hashing_asm and
+ * srdis_done.
+ */
+ .align 256
.export disable_sr_hashing_asm,code
disable_sr_hashing_asm:
@@ -1000,28 +1006,26 @@ disable_sr_hashing_asm:
.callinfo NO_CALLS
.entry
- /* Switch to real mode */
+ /*
+ * Switch to real mode
+ */
+ /* pcxt_ssm_bug */
+ rsm PSW_SM_I, %r0
+ load32 PA(1f), %r1
+ nop
+ nop
+ nop
+ nop
+ nop
- ssm 0, %r0 /* relied upon translation! */
- nop
- nop
- nop
- nop
- nop
- nop
- nop
-
- rsm (PSW_SM_Q|PSW_SM_I), %r0 /* disable Q&I to load the iia queue */
- ldil L%REAL_MODE_PSW, %r1
- ldo R%REAL_MODE_PSW(%r1), %r1
- mtctl %r1, %cr22
+ rsm PSW_SM_Q, %r0 /* prep to load iia queue */
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
- ldil L%PA(1f), %r1
- ldo R%PA(1f)(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ head */
ldo 4(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ tail */
+ load32 REAL_MODE_PSW, %r1
+ mtctl %r1, %ipsw
rfi
nop
@@ -1053,27 +1057,31 @@ srdis_pcxl:
srdis_pa20:
- /* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+ */
+ /* Disable Space Register Hashing for PCXU,PCXU+,PCXW,PCXW+,PCXW2 */
.word 0x144008bc /* mfdiag %dr2, %r28 */
depdi 0, 54,1, %r28 /* clear DIAG_SPHASH_ENAB (bit 54) */
.word 0x145c1840 /* mtdiag %r28, %dr2 */
+
srdis_done:
-
/* Switch back to virtual mode */
+ rsm PSW_SM_I, %r0 /* prep to load iia queue */
+ load32 2f, %r1
+ nop
+ nop
+ nop
+ nop
+ nop
- rsm PSW_SM_Q, %r0 /* clear Q bit to load iia queue */
- ldil L%KERNEL_PSW, %r1
- ldo R%KERNEL_PSW(%r1), %r1
- mtctl %r1, %cr22
+ rsm PSW_SM_Q, %r0 /* prep to load iia queue */
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
- ldil L%(2f), %r1
- ldo R%(2f)(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ head */
ldo 4(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ tail */
+ load32 KERNEL_PSW, %r1
+ mtctl %r1, %ipsw
rfi
nop
diff --git a/arch/parisc/kernel/pci-dma.c b/arch/parisc/kernel/pci-dma.c
index 368cc095c99f..ae6213d71670 100644
--- a/arch/parisc/kernel/pci-dma.c
+++ b/arch/parisc/kernel/pci-dma.c
@@ -31,7 +31,7 @@
#include /* get_order */
#include
#include
-
+#include /* for purge_tlb_*() macros */
static struct proc_dir_entry * proc_gsc_root = NULL;
static int pcxl_proc_info(char *buffer, char **start, off_t offset, int length);
@@ -333,23 +333,33 @@ pcxl_free_range(unsigned long vaddr, size_t size)
static int __init
pcxl_dma_init(void)
{
- if (pcxl_dma_start == 0)
- return 0;
+ if (pcxl_dma_start == 0)
+ return 0;
- spin_lock_init(&pcxl_res_lock);
- pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3);
- pcxl_res_hint = 0;
- pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL,
+ spin_lock_init(&pcxl_res_lock);
+ pcxl_res_size = PCXL_DMA_MAP_SIZE >> (PAGE_SHIFT + 3);
+ pcxl_res_hint = 0;
+ pcxl_res_map = (char *)__get_free_pages(GFP_KERNEL,
get_order(pcxl_res_size));
- memset(pcxl_res_map, 0, pcxl_res_size);
- proc_gsc_root = proc_mkdir("gsc", 0);
- create_proc_info_entry("dino", 0, proc_gsc_root, pcxl_proc_info);
- return 0;
+ memset(pcxl_res_map, 0, pcxl_res_size);
+ proc_gsc_root = proc_mkdir("gsc", 0);
+ if (!proc_gsc_root)
+ printk(KERN_WARNING
+ "pcxl_dma_init: Unable to create gsc /proc dir entry\n");
+ else {
+ struct proc_dir_entry* ent;
+ ent = create_proc_info_entry("pcxl_dma", 0,
+ proc_gsc_root, pcxl_proc_info);
+ if (!ent)
+ printk(KERN_WARNING
+ "pci-dma.c: Unable to create pcxl_dma /proc entry.\n");
+ }
+ return 0;
}
__initcall(pcxl_dma_init);
-static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_addr_t *dma_handle, int flag)
+static void * pa11_dma_alloc_consistent (struct device *dev, size_t size, dma_addr_t *dma_handle, gfp_t flag)
{
unsigned long vaddr;
unsigned long paddr;
@@ -502,13 +512,13 @@ struct hppa_dma_ops pcxl_dma_ops = {
};
static void *fail_alloc_consistent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int flag)
+ dma_addr_t *dma_handle, gfp_t flag)
{
return NULL;
}
static void *pa11_dma_alloc_noncoherent(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int flag)
+ dma_addr_t *dma_handle, gfp_t flag)
{
void *addr = NULL;
@@ -545,16 +555,16 @@ struct hppa_dma_ops pcx_dma_ops = {
static int pcxl_proc_info(char *buf, char **start, off_t offset, int len)
{
+#if 0
u_long i = 0;
unsigned long *res_ptr = (u_long *)pcxl_res_map;
- unsigned long total_pages = pcxl_res_size << 3; /* 8 bits per byte */
+#endif
+ unsigned long total_pages = pcxl_res_size << 3; /* 8 bits per byte */
- sprintf(buf, "\nDMA Mapping Area size : %d bytes (%d pages)\n",
- PCXL_DMA_MAP_SIZE,
- (pcxl_res_size << 3) ); /* 1 bit per page */
+ sprintf(buf, "\nDMA Mapping Area size : %d bytes (%ld pages)\n",
+ PCXL_DMA_MAP_SIZE, total_pages);
- sprintf(buf, "%sResource bitmap : %d bytes (%d pages)\n",
- buf, pcxl_res_size, pcxl_res_size << 3); /* 8 bits per byte */
+ sprintf(buf, "%sResource bitmap : %d bytes\n", buf, pcxl_res_size);
strcat(buf, " total: free: used: % used:\n");
sprintf(buf, "%sblocks %8d %8ld %8ld %8ld%%\n", buf, pcxl_res_size,
@@ -564,7 +574,8 @@ static int pcxl_proc_info(char *buf, char **start, off_t offset, int len)
sprintf(buf, "%spages %8ld %8ld %8ld %8ld%%\n", buf, total_pages,
total_pages - pcxl_used_pages, pcxl_used_pages,
(pcxl_used_pages * 100 / total_pages));
-
+
+#if 0
strcat(buf, "\nResource bitmap:");
for(; i < (pcxl_res_size / sizeof(u_long)); ++i, ++res_ptr) {
@@ -572,6 +583,7 @@ static int pcxl_proc_info(char *buf, char **start, off_t offset, int len)
strcat(buf,"\n ");
sprintf(buf, "%s %08lx", buf, *res_ptr);
}
+#endif
strcat(buf, "\n");
return strlen(buf);
}
diff --git a/arch/parisc/kernel/pci.c b/arch/parisc/kernel/pci.c
index e6a891a0cad0..88cba49c5301 100644
--- a/arch/parisc/kernel/pci.c
+++ b/arch/parisc/kernel/pci.c
@@ -202,7 +202,8 @@ static void
pcibios_link_hba_resources( struct resource *hba_res, struct resource *r)
{
if (!r->parent) {
- printk(KERN_EMERG "PCI: Tell willy he's wrong\n");
+ printk(KERN_EMERG "PCI: resource not parented! [%lx-%lx]\n",
+ r->start, r->end);
r->parent = hba_res;
/* reverse link is harder *sigh* */
diff --git a/arch/parisc/kernel/pdc_cons.c b/arch/parisc/kernel/pdc_cons.c
index 01f676d1673b..215d78c87bc5 100644
--- a/arch/parisc/kernel/pdc_cons.c
+++ b/arch/parisc/kernel/pdc_cons.c
@@ -41,7 +41,7 @@
/* Define EARLY_BOOTUP_DEBUG to debug kernel related boot problems.
* On production kernels EARLY_BOOTUP_DEBUG should be undefined. */
-#undef EARLY_BOOTUP_DEBUG
+#define EARLY_BOOTUP_DEBUG
#include
@@ -49,14 +49,8 @@
#include
#include
#include
-#include
-#include
-#include
#include
#include
-#include
-#include
-#include
#include /* for iodc_call() proto and friends */
@@ -96,7 +90,6 @@ static int pdc_console_setup(struct console *co, char *options)
}
#if defined(CONFIG_PDC_CONSOLE)
-#define PDC_CONSOLE_DEVICE pdc_console_device
static struct tty_driver * pdc_console_device (struct console *c, int *index)
{
extern struct tty_driver console_driver;
@@ -104,22 +97,19 @@ static struct tty_driver * pdc_console_device (struct console *c, int *index)
return &console_driver;
}
#else
-#define PDC_CONSOLE_DEVICE NULL
+#define pdc_console_device NULL
#endif
static struct console pdc_cons = {
.name = "ttyB",
.write = pdc_console_write,
- .device = PDC_CONSOLE_DEVICE,
+ .device = pdc_console_device,
.setup = pdc_console_setup,
- .flags = CON_BOOT|CON_PRINTBUFFER|CON_ENABLED,
+ .flags = CON_BOOT | CON_PRINTBUFFER | CON_ENABLED,
.index = -1,
};
static int pdc_console_initialized;
-extern unsigned long con_start; /* kernel/printk.c */
-extern unsigned long log_end; /* kernel/printk.c */
-
static void pdc_console_init_force(void)
{
@@ -146,27 +136,11 @@ void __init pdc_console_init(void)
}
-/* Unregister the pdc console with the printk console layer */
-void pdc_console_die(void)
-{
- if (!pdc_console_initialized)
- return;
- --pdc_console_initialized;
-
- printk(KERN_INFO "Switching from PDC console\n");
-
- /* Don't repeat what we've already printed */
- con_start = log_end;
-
- unregister_console(&pdc_cons);
-}
-
-
/*
* Used for emergencies. Currently only used if an HPMC occurs. If an
* HPMC occurs, it is possible that the current console may not be
- * properly initialed after the PDC IO reset. This routine unregisters all
- * of the current consoles, reinitializes the pdc console and
+ * properly initialised after the PDC IO reset. This routine unregisters
+ * all of the current consoles, reinitializes the pdc console and
* registers it.
*/
@@ -177,13 +151,13 @@ void pdc_console_restart(void)
if (pdc_console_initialized)
return;
+ /* If we've already seen the output, don't bother to print it again */
+ if (console_drivers != NULL)
+ pdc_cons.flags &= ~CON_PRINTBUFFER;
+
while ((console = console_drivers) != NULL)
unregister_console(console_drivers);
- /* Don't repeat what we've already printed */
- con_start = log_end;
-
/* force registering the pdc console */
pdc_console_init_force();
}
-
diff --git a/arch/parisc/kernel/perf.c b/arch/parisc/kernel/perf.c
index b3ad0a505b87..44670d6e06f4 100644
--- a/arch/parisc/kernel/perf.c
+++ b/arch/parisc/kernel/perf.c
@@ -746,7 +746,8 @@ static int perf_write_image(uint64_t *memaddr)
uint64_t *bptr;
uint32_t dwords;
uint32_t *intrigue_rdr;
- uint64_t *intrigue_bitmask, tmp64, proc_hpa;
+ uint64_t *intrigue_bitmask, tmp64;
+ void __iomem *runway;
struct rdr_tbl_ent *tentry;
int i;
@@ -798,15 +799,16 @@ static int perf_write_image(uint64_t *memaddr)
return -1;
}
- proc_hpa = cpu_device->hpa;
+ runway = ioremap(cpu_device->hpa.start, 4096);
/* Merge intrigue bits into Runway STATUS 0 */
- tmp64 = __raw_readq(proc_hpa + RUNWAY_STATUS) & 0xffecfffffffffffful;
- __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul), proc_hpa + RUNWAY_STATUS);
+ tmp64 = __raw_readq(runway + RUNWAY_STATUS) & 0xffecfffffffffffful;
+ __raw_writeq(tmp64 | (*memaddr++ & 0x0013000000000000ul),
+ runway + RUNWAY_STATUS);
/* Write RUNWAY DEBUG registers */
for (i = 0; i < 8; i++) {
- __raw_writeq(*memaddr++, proc_hpa + RUNWAY_DEBUG + i);
+ __raw_writeq(*memaddr++, runway + RUNWAY_DEBUG);
}
return 0;
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index 46b759385115..7fdca87ef647 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -9,7 +9,7 @@
* Copyright (C) 2000-2003 Paul Bame
* Copyright (C) 2000 Philipp Rumpf
* Copyright (C) 2000 David Kennedy
- * Copyright (C) 2000 Richard Hirst
+ * Copyright (C) 2000 Richard Hirst
* Copyright (C) 2000 Grant Grundler
* Copyright (C) 2001 Alan Modra
* Copyright (C) 2001-2002 Ryan Bradetich
@@ -245,7 +245,17 @@ int
sys_clone(unsigned long clone_flags, unsigned long usp,
struct pt_regs *regs)
{
- int __user *user_tid = (int __user *)regs->gr[26];
+ /* Arugments from userspace are:
+ r26 = Clone flags.
+ r25 = Child stack.
+ r24 = parent_tidptr.
+ r23 = Is the TLS storage descriptor
+ r22 = child_tidptr
+
+ However, these last 3 args are only examined
+ if the proper flags are set. */
+ int __user *child_tidptr;
+ int __user *parent_tidptr;
/* usp must be word aligned. This also prevents users from
* passing in the value 1 (which is the signal for a special
@@ -253,10 +263,20 @@ sys_clone(unsigned long clone_flags, unsigned long usp,
usp = ALIGN(usp, 4);
/* A zero value for usp means use the current stack */
- if(usp == 0)
- usp = regs->gr[30];
+ if (usp == 0)
+ usp = regs->gr[30];
- return do_fork(clone_flags, usp, regs, 0, user_tid, NULL);
+ if (clone_flags & CLONE_PARENT_SETTID)
+ parent_tidptr = (int __user *)regs->gr[24];
+ else
+ parent_tidptr = NULL;
+
+ if (clone_flags & (CLONE_CHILD_SETTID | CLONE_CHILD_CLEARTID))
+ child_tidptr = (int __user *)regs->gr[22];
+ else
+ child_tidptr = NULL;
+
+ return do_fork(clone_flags, usp, regs, 0, parent_tidptr, child_tidptr);
}
int
@@ -332,6 +352,10 @@ copy_thread(int nr, unsigned long clone_flags, unsigned long usp,
} else {
cregs->kpc = (unsigned long) &child_return;
}
+ /* Setup thread TLS area from the 4th parameter in clone */
+ if (clone_flags & CLONE_SETTLS)
+ cregs->cr27 = pregs->gr[23];
+
}
return 0;
diff --git a/arch/parisc/kernel/processor.c b/arch/parisc/kernel/processor.c
index 13b721cb9f55..4f5bbcf1f5a4 100644
--- a/arch/parisc/kernel/processor.c
+++ b/arch/parisc/kernel/processor.c
@@ -92,7 +92,7 @@ static int __init processor_probe(struct parisc_device *dev)
* May get overwritten by PAT code.
*/
cpuid = boot_cpu_data.cpu_count;
- txn_addr = dev->hpa; /* for legacy PDC */
+ txn_addr = dev->hpa.start; /* for legacy PDC */
#ifdef __LP64__
if (is_pdc_pat()) {
@@ -122,7 +122,7 @@ static int __init processor_probe(struct parisc_device *dev)
* boot time (ie shutdown a CPU from an OS perspective).
*/
/* get the cpu number */
- status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa);
+ status = pdc_pat_cpu_get_number(&cpu_info, dev->hpa.start);
BUG_ON(PDC_OK != status);
@@ -130,7 +130,7 @@ static int __init processor_probe(struct parisc_device *dev)
printk(KERN_WARNING "IGNORING CPU at 0x%x,"
" cpu_slot_id > NR_CPUS"
" (%ld > %d)\n",
- dev->hpa, cpu_info.cpu_num, NR_CPUS);
+ dev->hpa.start, cpu_info.cpu_num, NR_CPUS);
/* Ignore CPU since it will only crash */
boot_cpu_data.cpu_count--;
return 1;
@@ -149,7 +149,7 @@ static int __init processor_probe(struct parisc_device *dev)
p->loops_per_jiffy = loops_per_jiffy;
p->dev = dev; /* Save IODC data in case we need it */
- p->hpa = dev->hpa; /* save CPU hpa */
+ p->hpa = dev->hpa.start; /* save CPU hpa */
p->cpuid = cpuid; /* save CPU id */
p->txn_addr = txn_addr; /* save CPU IRQ address */
#ifdef CONFIG_SMP
diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S
index 8dd5defb7316..8c2859cca77e 100644
--- a/arch/parisc/kernel/real2.S
+++ b/arch/parisc/kernel/real2.S
@@ -7,8 +7,10 @@
* Copyright (C) 2000 Hewlett Packard (Paul Bame bame@puffin.external.hp.com)
*
*/
-#include
+#include
+
#include
+#include
.section .bss
.export real_stack
@@ -20,7 +22,7 @@ real32_stack:
real64_stack:
.block 8192
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
# define REG_SZ 8
#else
# define REG_SZ 4
@@ -50,7 +52,7 @@ save_cr_end:
real32_call_asm:
STREG %rp, -RP_OFFSET(%sp) /* save RP */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
callee_save
ldo 2*REG_SZ(%sp), %sp /* room for a couple more saves */
STREG %r27, -1*REG_SZ(%sp)
@@ -77,7 +79,7 @@ real32_call_asm:
b,l save_control_regs,%r2 /* modifies r1, r2, r28 */
nop
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
rsm PSW_SM_W, %r0 /* go narrow */
#endif
@@ -85,7 +87,7 @@ real32_call_asm:
bv 0(%r31)
nop
ric_ret:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ssm PSW_SM_W, %r0 /* go wide */
#endif
/* restore CRs before going virtual in case we page fault */
@@ -97,7 +99,7 @@ ric_ret:
tovirt_r1 %sp
LDREG -REG_SZ(%sp), %sp /* restore SP */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
LDREG -1*REG_SZ(%sp), %r27
LDREG -2*REG_SZ(%sp), %r29
ldo -2*REG_SZ(%sp), %sp
@@ -143,24 +145,21 @@ restore_control_regs:
/* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for
* more general-purpose use by the several places which need RFIs
*/
- .align 128
.text
+ .align 128
rfi_virt2real:
/* switch to real mode... */
- ssm 0,0 /* See "relied upon translation" */
- nop /* PA 2.0 Arch. F-5 */
- nop
- nop
+ rsm PSW_SM_I,%r0
+ load32 PA(rfi_v2r_1), %r1
nop
nop
nop
nop
nop
- rsm (PSW_SM_Q|PSW_SM_I),%r0 /* disable Q & I bits to load iia queue */
+ rsm PSW_SM_Q,%r0 /* disable Q & I bits to load iia queue */
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
- load32 PA(rfi_v2r_1), %r1
mtctl %r1, %cr18 /* IIAOQ head */
ldo 4(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ tail */
@@ -184,10 +183,8 @@ rfi_v2r_1:
.text
.align 128
rfi_real2virt:
- ssm 0,0 /* See "relied upon translation" */
- nop /* PA 2.0 Arch. F-5 */
- nop
- nop
+ rsm PSW_SM_I,%r0
+ load32 (rfi_r2v_1), %r1
nop
nop
nop
@@ -197,7 +194,6 @@ rfi_real2virt:
rsm PSW_SM_Q,%r0 /* disable Q bit to load iia queue */
mtctl %r0, %cr17 /* Clear IIASQ tail */
mtctl %r0, %cr17 /* Clear IIASQ head */
- load32 (rfi_r2v_1), %r1
mtctl %r1, %cr18 /* IIAOQ head */
ldo 4(%r1), %r1
mtctl %r1, %cr18 /* IIAOQ tail */
@@ -218,7 +214,7 @@ rfi_r2v_1:
bv 0(%r2)
nop
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/************************ 64-bit real-mode calls ***********************/
/* This is only usable in wide kernels right now and will probably stay so */
@@ -296,7 +292,7 @@ pc_in_user_space:
** comparing function pointers.
*/
__canonicalize_funcptr_for_compare:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
bve (%r2)
#else
bv %r0(%r2)
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 0224651fd8f1..82c24e62ab63 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -490,15 +490,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info,
give_sigsegv:
DBG(1,"setup_rt_frame: sending SIGSEGV\n");
- if (sig == SIGSEGV)
- ka->sa.sa_handler = SIG_DFL;
- si.si_signo = SIGSEGV;
- si.si_errno = 0;
- si.si_code = SI_KERNEL;
- si.si_pid = current->pid;
- si.si_uid = current->uid;
- si.si_addr = frame;
- force_sig_info(SIGSEGV, &si, current);
+ force_sigsegv(sig, current);
return 0;
}
@@ -633,10 +625,14 @@ do_signal(sigset_t *oldset, struct pt_regs *regs, int in_syscall)
put_user(0xe0008200, &usp[3]);
put_user(0x34140000, &usp[4]);
- /* Stack is 64-byte aligned, and we only
- * need to flush 1 cache line */
- asm("fdc 0(%%sr3, %0)\n"
- "fic 0(%%sr3, %0)\n"
+ /* Stack is 64-byte aligned, and we only need
+ * to flush 1 cache line.
+ * Flushing one cacheline is cheap.
+ * "sync" on bigger (> 4 way) boxes is not.
+ */
+ asm("fdc %%r0(%%sr3, %0)\n"
+ "sync\n"
+ "fic %%r0(%%sr3, %0)\n"
"sync\n"
: : "r"(regs->gr[30]));
diff --git a/arch/parisc/kernel/smp.c b/arch/parisc/kernel/smp.c
index bcc7e83f5142..5db3be4e2704 100644
--- a/arch/parisc/kernel/smp.c
+++ b/arch/parisc/kernel/smp.c
@@ -18,7 +18,7 @@
*/
#undef ENTRY_SYS_CPUS /* syscall support for iCOD-like functionality */
-#include
+#include
#include
#include
diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S
index 8c7a7185cd3b..b29b76b42bb7 100644
--- a/arch/parisc/kernel/syscall.S
+++ b/arch/parisc/kernel/syscall.S
@@ -6,6 +6,7 @@
* thanks to Philipp Rumpf, Mike Shaver and various others
* sorry about the wall, puffin..
*/
+#include /* for CONFIG_SMP */
#include
#include
@@ -22,15 +23,13 @@
*/
#define KILL_INSN break 0,0
-#include /* for CONFIG_SMP */
-
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
.level 2.0w
#else
.level 1.1
#endif
-#ifndef __LP64__
+#ifndef CONFIG_64BIT
.macro fixup_branch,lbl
b \lbl
.endm
@@ -103,7 +102,7 @@ linux_gateway_entry:
mfsp %sr7,%r1 /* save user sr7 */
mtsp %r1,%sr3 /* and store it in sr3 */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* for now we can *always* set the W bit on entry to the syscall
* since we don't support wide userland processes. We could
* also save the current SM other than in r0 and restore it on
@@ -155,7 +154,7 @@ linux_gateway_entry:
STREG %r19, TASK_PT_GR19(%r1)
LDREGM -FRAME_SIZE(%r30), %r2 /* get users sp back */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
extrd,u %r2,63,1,%r19 /* W hidden in bottom bit */
#if 0
xor %r19,%r2,%r2 /* clear bottom bit */
@@ -186,7 +185,7 @@ linux_gateway_entry:
loadgp
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
copy %r19,%r2 /* W bit back to r2 */
#else
@@ -205,7 +204,7 @@ linux_gateway_entry:
/* Note! We cannot use the syscall table that is mapped
nearby since the gateway page is mapped execute-only. */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldil L%sys_call_table, %r1
or,= %r2,%r2,%r2
addil L%(sys_call_table64-sys_call_table), %r1
@@ -321,7 +320,7 @@ tracesys_next:
LDREG TASK_PT_GR25(%r1), %r25
LDREG TASK_PT_GR24(%r1), %r24
LDREG TASK_PT_GR23(%r1), %r23
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
LDREG TASK_PT_GR22(%r1), %r22
LDREG TASK_PT_GR21(%r1), %r21
ldo -16(%r30),%r29 /* Reference param save area */
@@ -350,7 +349,7 @@ tracesys_next:
tracesys_exit:
ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */
LDREG TI_TASK(%r1), %r1
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
bl syscall_trace, %r2
@@ -371,7 +370,7 @@ tracesys_exit:
tracesys_sigexit:
ldo -THREAD_SZ_ALGN-FRAME_SIZE(%r30),%r1 /* get task ptr */
LDREG 0(%r1), %r1
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
ldo -16(%r30),%r29 /* Reference param save area */
#endif
bl syscall_trace, %r2
@@ -404,7 +403,7 @@ lws_start:
gate .+8, %r0
depi 3, 31, 2, %r31 /* Ensure we return to userspace */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* FIXME: If we are a 64-bit kernel just
* turn this on unconditionally.
*/
@@ -440,7 +439,7 @@ lws_exit_nosys:
/* Fall through: Return to userspace */
lws_exit:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* decide whether to reset the wide mode bit
*
* For a syscall, the W bit is stored in the lowest bit
@@ -486,7 +485,7 @@ lws_exit:
/* ELF64 Process entry path */
lws_compare_and_swap64:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
b,n lws_compare_and_swap
#else
/* If we are not a 64-bit kernel, then we don't
@@ -497,7 +496,7 @@ lws_compare_and_swap64:
/* ELF32 Process entry path */
lws_compare_and_swap32:
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* Clip all the input registers */
depdi 0, 31, 32, %r26
depdi 0, 31, 32, %r25
@@ -608,7 +607,7 @@ cas_action:
the other for the store. Either return -EFAULT.
Each of the entries must be relocated. */
.section __ex_table,"aw"
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* Pad the address calculation */
.word 0,(2b - linux_gateway_page)
.word 0,(3b - linux_gateway_page)
@@ -619,7 +618,7 @@ cas_action:
.previous
.section __ex_table,"aw"
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* Pad the address calculation */
.word 0,(1b - linux_gateway_page)
.word 0,(3b - linux_gateway_page)
@@ -638,7 +637,7 @@ end_linux_gateway_page:
/* Relocate symbols assuming linux_gateway_page is mapped
to virtual address 0x0 */
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
/* FIXME: The code will always be on the gateay page
and thus it will be on the first 4k, the
assembler seems to think that the final
@@ -666,7 +665,7 @@ lws_table:
sys_call_table:
#include "syscall_table.S"
-#ifdef __LP64__
+#ifdef CONFIG_64BIT
.align 4096
.export sys_call_table64
.Lsys_call_table64:
diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S
index dcfa4d3d0e7d..32cbc0489324 100644
--- a/arch/parisc/kernel/syscall_table.S
+++ b/arch/parisc/kernel/syscall_table.S
@@ -35,7 +35,7 @@
#undef ENTRY_UHOH
#undef ENTRY_COMP
#undef ENTRY_OURS
-#if defined(__LP64__) && !defined(SYSCALL_TABLE_64BIT)
+#if defined(CONFIG_64BIT) && !defined(SYSCALL_TABLE_64BIT)
/* Use ENTRY_SAME for 32-bit syscalls which are the same on wide and
* narrow palinux. Use ENTRY_DIFF for those where a 32-bit specific
* implementation is required on wide palinux. Use ENTRY_COMP where
@@ -46,7 +46,7 @@
#define ENTRY_UHOH(_name_) .dword sys32_##unimplemented
#define ENTRY_OURS(_name_) .dword parisc_##_name_
#define ENTRY_COMP(_name_) .dword compat_sys_##_name_
-#elif defined(__LP64__) && defined(SYSCALL_TABLE_64BIT)
+#elif defined(CONFIG_64BIT) && defined(SYSCALL_TABLE_64BIT)
#define ENTRY_SAME(_name_) .dword sys_##_name_
#define ENTRY_DIFF(_name_) .dword sys_##_name_
#define ENTRY_UHOH(_name_) .dword sys_##_name_
@@ -368,5 +368,11 @@
ENTRY_COMP(mbind) /* 260 */
ENTRY_COMP(get_mempolicy)
ENTRY_COMP(set_mempolicy)
+ ENTRY_SAME(ni_syscall) /* 263: reserved for vserver */
+ ENTRY_SAME(add_key)
+ ENTRY_SAME(request_key) /* 265 */
+ ENTRY_SAME(keyctl)
+ ENTRY_SAME(ioprio_set)
+ ENTRY_SAME(ioprio_get)
/* Nothing yet */
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 7ff67f8e9f8c..bc979e1abdec 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -89,14 +89,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
}
}
-#ifdef CONFIG_CHASSIS_LCD_LED
- /* Only schedule the led tasklet on cpu 0, and only if it
- * is enabled.
- */
- if (cpu == 0 && !atomic_read(&led_tasklet.count))
- tasklet_schedule(&led_tasklet);
-#endif
-
/* check soft power switch status */
if (cpu == 0 && !atomic_read(&power_tasklet.count))
tasklet_schedule(&power_tasklet);
@@ -104,6 +96,24 @@ irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
return IRQ_HANDLED;
}
+
+unsigned long profile_pc(struct pt_regs *regs)
+{
+ unsigned long pc = instruction_pointer(regs);
+
+ if (regs->gr[0] & PSW_N)
+ pc -= 4;
+
+#ifdef CONFIG_SMP
+ if (in_lock_functions(pc))
+ pc = regs->gr[2];
+#endif
+
+ return pc;
+}
+EXPORT_SYMBOL(profile_pc);
+
+
/*** converted from ia64 ***/
/*
* Return the number of micro-seconds that elapsed since the last
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index d2e5b229a2f4..15914f0235a0 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -74,7 +74,10 @@ void show_regs(struct pt_regs *regs)
char *level;
unsigned long cr30;
unsigned long cr31;
-
+ /* carlos says that gcc understands better memory in a struct,
+ * and it makes our life easier with fpregs -- T-Bone */
+ struct { u32 sw[2]; } s;
+
level = user_mode(regs) ? KERN_DEBUG : KERN_CRIT;
printk("%s\n", level); /* don't want to have that pretty register dump messed up */
@@ -103,11 +106,33 @@ void show_regs(struct pt_regs *regs)
printk("%s\n", buf);
}
-#if RIDICULOUSLY_VERBOSE
- for (i = 0; i < 32; i += 2)
- printk("%sFR%02d : %016lx FR%2d : %016lx", level, i,
- regs->fr[i], i+1, regs->fr[i+1]);
-#endif
+ /* FR are 64bit everywhere. Need to use asm to get the content
+ * of fpsr/fper1, and we assume that we won't have a FP Identify
+ * in our way, otherwise we're screwed.
+ * The fldd is used to restore the T-bit if there was one, as the
+ * store clears it anyway.
+ * BTW, PA2.0 book says "thou shall not use fstw on FPSR/FPERs". */
+ __asm__ (
+ "fstd %%fr0,0(%1) \n\t"
+ "fldd 0(%1),%%fr0 \n\t"
+ : "=m" (s) : "r" (&s) : "%r0"
+ );
+
+ printk("%s\n", level);
+ printk("%s VZOUICununcqcqcqcqcqcrmunTDVZOUI\n", level);
+ printbinary(buf, s.sw[0], 32);
+ printk("%sFPSR: %s\n", level, buf);
+ printk("%sFPER1: %08x\n", level, s.sw[1]);
+
+ /* here we'll print fr0 again, tho it'll be meaningless */
+ for (i = 0; i < 32; i += 4) {
+ int j;
+ p = buf;
+ p += sprintf(p, "%sfr%02d-%02d ", level, i, i + 3);
+ for (j = 0; j < 4; j++)
+ p += sprintf(p, " %016llx", (i+j) == 0 ? 0 : regs->fr[i+j]);
+ printk("%s\n", buf);
+ }
cr30 = mfctl(30);
cr31 = mfctl(31);
diff --git a/arch/parisc/kernel/unaligned.c b/arch/parisc/kernel/unaligned.c
index 62eea35bcd69..eaae8a021f9f 100644
--- a/arch/parisc/kernel/unaligned.c
+++ b/arch/parisc/kernel/unaligned.c
@@ -513,15 +513,18 @@ void handle_unaligned(struct pt_regs *regs)
register int flop=0; /* true if this is a flop */
/* log a message with pacing */
- if (user_mode(regs))
- {
- if (unaligned_count > 5 && jiffies - last_time > 5*HZ)
- {
+ if (user_mode(regs)) {
+ if (current->thread.flags & PARISC_UAC_SIGBUS) {
+ goto force_sigbus;
+ }
+
+ if (unaligned_count > 5 && jiffies - last_time > 5*HZ) {
unaligned_count = 0;
last_time = jiffies;
}
- if (++unaligned_count < 5)
- {
+
+ if (!(current->thread.flags & PARISC_UAC_NOPRINT)
+ && ++unaligned_count < 5) {
char buf[256];
sprintf(buf, "%s(%d): unaligned access to 0x" RFMT " at ip=0x" RFMT "\n",
current->comm, current->pid, regs->ior, regs->iaoq[0]);
@@ -530,6 +533,7 @@ void handle_unaligned(struct pt_regs *regs)
show_regs(regs);
#endif
}
+
if (!unaligned_enabled)
goto force_sigbus;
}
diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S
index 1b91612ed964..e0661c2978ed 100644
--- a/arch/parisc/lib/fixup.S
+++ b/arch/parisc/lib/fixup.S
@@ -35,7 +35,7 @@
extrd,u \t2,63,32,\t2
#endif
/* t2 = &__per_cpu_offset[smp_processor_id()]; */
- LDREG,s \t2(\t1),\t2
+ LDREGX \t2(\t1),\t2
addil LT%per_cpu__exception_data,%r27
LDREG RT%per_cpu__exception_data(%r1),\t1
/* t1 = &__get_cpu_var(exception_data) */
@@ -53,6 +53,8 @@
.endm
#endif
+ .level LEVEL
+
.text
.section .fixup, "ax"
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index feb1b9f42c2b..b7098035321f 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -339,6 +339,7 @@ unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len)
pds = (double *)pcs;
pdd = (double *)pcd;
+#if 0
/* Copy 8 doubles at a time */
while (len >= 8*sizeof(double)) {
register double r1, r2, r3, r4, r5, r6, r7, r8;
@@ -366,6 +367,7 @@ unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len)
fstdma(d_space, r8, pdd, pmc_store_exc);
len -= 8*sizeof(double);
}
+#endif
pws = (unsigned int *)pds;
pwd = (unsigned int *)pdd;
diff --git a/arch/ppc/8xx_io/cs4218.h b/arch/ppc/8xx_io/cs4218.h
index a3c38c5a5db2..f1c7392255f8 100644
--- a/arch/ppc/8xx_io/cs4218.h
+++ b/arch/ppc/8xx_io/cs4218.h
@@ -78,7 +78,7 @@ typedef struct {
const char *name2;
void (*open)(void);
void (*release)(void);
- void *(*dma_alloc)(unsigned int, int);
+ void *(*dma_alloc)(unsigned int, gfp_t);
void (*dma_free)(void *, unsigned int);
int (*irqinit)(void);
#ifdef MODULE
diff --git a/arch/ppc/8xx_io/cs4218_tdm.c b/arch/ppc/8xx_io/cs4218_tdm.c
index 2ca9ec7ec3a7..532caa388dc2 100644
--- a/arch/ppc/8xx_io/cs4218_tdm.c
+++ b/arch/ppc/8xx_io/cs4218_tdm.c
@@ -318,7 +318,7 @@ struct cs_sound_settings {
static struct cs_sound_settings sound;
-static void *CS_Alloc(unsigned int size, int flags);
+static void *CS_Alloc(unsigned int size, gfp_t flags);
static void CS_Free(void *ptr, unsigned int size);
static int CS_IrqInit(void);
#ifdef MODULE
@@ -959,7 +959,7 @@ static TRANS transCSNormalRead = {
/*** Low level stuff *********************************************************/
-static void *CS_Alloc(unsigned int size, int flags)
+static void *CS_Alloc(unsigned int size, gfp_t flags)
{
int order;
diff --git a/arch/ppc/kernel/dma-mapping.c b/arch/ppc/kernel/dma-mapping.c
index 8edee806dae7..0f710d2baec6 100644
--- a/arch/ppc/kernel/dma-mapping.c
+++ b/arch/ppc/kernel/dma-mapping.c
@@ -115,7 +115,7 @@ static struct vm_region consistent_head = {
};
static struct vm_region *
-vm_region_alloc(struct vm_region *head, size_t size, int gfp)
+vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp)
{
unsigned long addr = head->vm_start, end = head->vm_end - size;
unsigned long flags;
@@ -173,7 +173,7 @@ static struct vm_region *vm_region_find(struct vm_region *head, unsigned long ad
* virtual and bus address for that space.
*/
void *
-__dma_alloc_coherent(size_t size, dma_addr_t *handle, int gfp)
+__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp)
{
struct page *page;
struct vm_region *c;
diff --git a/arch/ppc/mm/pgtable.c b/arch/ppc/mm/pgtable.c
index 81a3d7446d37..43505b1fc5d8 100644
--- a/arch/ppc/mm/pgtable.c
+++ b/arch/ppc/mm/pgtable.c
@@ -114,9 +114,9 @@ struct page *pte_alloc_one(struct mm_struct *mm, unsigned long address)
struct page *ptepage;
#ifdef CONFIG_HIGHPTE
- int flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
+ gfp_t flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
#else
- int flags = GFP_KERNEL | __GFP_REPEAT;
+ gfp_t flags = GFP_KERNEL | __GFP_REPEAT;
#endif
ptepage = alloc_pages(flags, 0);
diff --git a/arch/ppc64/kernel/mpic.c b/arch/ppc64/kernel/mpic.c
index cc262a05ddb4..5f5bc73754d9 100644
--- a/arch/ppc64/kernel/mpic.c
+++ b/arch/ppc64/kernel/mpic.c
@@ -506,8 +506,8 @@ struct mpic * __init mpic_alloc(unsigned long phys_addr,
mpic->senses_count = senses_count;
/* Map the global registers */
- mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x1000);
- mpic->tmregs = mpic->gregs + (MPIC_TIMER_BASE >> 2);
+ mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x2000);
+ mpic->tmregs = mpic->gregs + ((MPIC_TIMER_BASE - MPIC_GREG_BASE) >> 2);
BUG_ON(mpic->gregs == NULL);
/* Reset */
diff --git a/arch/sh/boards/renesas/rts7751r2d/mach.c b/arch/sh/boards/renesas/rts7751r2d/mach.c
index 1efc18e786d5..610740512d56 100644
--- a/arch/sh/boards/renesas/rts7751r2d/mach.c
+++ b/arch/sh/boards/renesas/rts7751r2d/mach.c
@@ -23,7 +23,7 @@ extern void init_rts7751r2d_IRQ(void);
extern void *rts7751r2d_ioremap(unsigned long, unsigned long);
extern int rts7751r2d_irq_demux(int irq);
-extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, int);
+extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t);
extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t);
/*
diff --git a/arch/sh/cchips/voyagergx/consistent.c b/arch/sh/cchips/voyagergx/consistent.c
index 5b92585a38d2..3d9a02c093a3 100644
--- a/arch/sh/cchips/voyagergx/consistent.c
+++ b/arch/sh/cchips/voyagergx/consistent.c
@@ -31,7 +31,7 @@ static LIST_HEAD(voya_alloc_list);
#define OHCI_SRAM_SIZE 0x10000
void *voyagergx_consistent_alloc(struct device *dev, size_t size,
- dma_addr_t *handle, int flag)
+ dma_addr_t *handle, gfp_t flag)
{
struct list_head *list = &voya_alloc_list;
struct voya_alloc_entry *entry;
diff --git a/arch/sh/drivers/pci/dma-dreamcast.c b/arch/sh/drivers/pci/dma-dreamcast.c
index 83de7ef4e7df..e12418bb1fa5 100644
--- a/arch/sh/drivers/pci/dma-dreamcast.c
+++ b/arch/sh/drivers/pci/dma-dreamcast.c
@@ -33,7 +33,7 @@
static int gapspci_dma_used = 0;
void *dreamcast_consistent_alloc(struct device *dev, size_t size,
- dma_addr_t *dma_handle, int flag)
+ dma_addr_t *dma_handle, gfp_t flag)
{
unsigned long buf;
diff --git a/arch/sh/mm/consistent.c b/arch/sh/mm/consistent.c
index 1f7af0c73cf4..df3a9e452cc5 100644
--- a/arch/sh/mm/consistent.c
+++ b/arch/sh/mm/consistent.c
@@ -11,7 +11,7 @@
#include
#include
-void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle)
+void *consistent_alloc(gfp_t gfp, size_t size, dma_addr_t *handle)
{
struct page *page, *end, *free;
void *ret;
diff --git a/arch/sparc64/solaris/socksys.c b/arch/sparc64/solaris/socksys.c
index d7c1c76582cc..fc6669e8dde1 100644
--- a/arch/sparc64/solaris/socksys.c
+++ b/arch/sparc64/solaris/socksys.c
@@ -49,7 +49,7 @@ IPPROTO_EGP, IPPROTO_PUP, IPPROTO_UDP, IPPROTO_IDP, IPPROTO_RAW,
#else
-extern void * mykmalloc(size_t s, int gfp);
+extern void * mykmalloc(size_t s, gfp_t gfp);
extern void mykfree(void *);
#endif
diff --git a/arch/sparc64/solaris/timod.c b/arch/sparc64/solaris/timod.c
index aaad29c35c83..b84e5456b025 100644
--- a/arch/sparc64/solaris/timod.c
+++ b/arch/sparc64/solaris/timod.c
@@ -39,7 +39,7 @@ static char * page = NULL ;
#else
-void * mykmalloc(size_t s, int gfp)
+void * mykmalloc(size_t s, gfp_t gfp)
{
static char * page;
static size_t free;
diff --git a/arch/um/include/sysdep-i386/thread.h b/arch/um/include/sysdep-i386/thread.h
index e2bd6bae8b8a..243fed44d780 100644
--- a/arch/um/include/sysdep-i386/thread.h
+++ b/arch/um/include/sysdep-i386/thread.h
@@ -4,7 +4,7 @@
#include
#define TASK_DEBUGREGS(task) ((unsigned long *) &(((char *) (task))[HOST_TASK_DEBUGREGS]))
-#ifdef CONFIG_MODE_TT
+#ifdef UML_CONFIG_MODE_TT
#define TASK_EXTERN_PID(task) *((int *) &(((char *) (task))[HOST_TASK_EXTERN_PID]))
#endif
diff --git a/arch/um/include/sysdep-x86_64/thread.h b/arch/um/include/sysdep-x86_64/thread.h
index 6a76a7f3683f..cbef3e1697f4 100644
--- a/arch/um/include/sysdep-x86_64/thread.h
+++ b/arch/um/include/sysdep-x86_64/thread.h
@@ -3,7 +3,7 @@
#include
-#ifdef CONFIG_MODE_TT
+#ifdef UML_CONFIG_MODE_TT
#define TASK_EXTERN_PID(task) *((int *) &(((char *) (task))[HOST_TASK_EXTERN_PID]))
#endif
diff --git a/arch/um/kernel/mem.c b/arch/um/kernel/mem.c
index ea008b031a8f..462cc9d65386 100644
--- a/arch/um/kernel/mem.c
+++ b/arch/um/kernel/mem.c
@@ -252,7 +252,7 @@ void paging_init(void)
#endif
}
-struct page *arch_validate(struct page *page, int mask, int order)
+struct page *arch_validate(struct page *page, gfp_t mask, int order)
{
unsigned long addr, zero = 0;
int i;
diff --git a/arch/um/kernel/process_kern.c b/arch/um/kernel/process_kern.c
index ea65db679e9c..0d73ceeece72 100644
--- a/arch/um/kernel/process_kern.c
+++ b/arch/um/kernel/process_kern.c
@@ -80,7 +80,7 @@ void free_stack(unsigned long stack, int order)
unsigned long alloc_stack(int order, int atomic)
{
unsigned long page;
- int flags = GFP_KERNEL;
+ gfp_t flags = GFP_KERNEL;
if (atomic)
flags = GFP_ATOMIC;
diff --git a/arch/x86_64/kernel/pci-gart.c b/arch/x86_64/kernel/pci-gart.c
index cf0a0315d586..88be97c96987 100644
--- a/arch/x86_64/kernel/pci-gart.c
+++ b/arch/x86_64/kernel/pci-gart.c
@@ -187,7 +187,7 @@ static void flush_gart(struct device *dev)
/* Allocate DMA memory on node near device */
noinline
-static void *dma_alloc_pages(struct device *dev, unsigned gfp, unsigned order)
+static void *dma_alloc_pages(struct device *dev, gfp_t gfp, unsigned order)
{
struct page *page;
int node;
@@ -204,7 +204,7 @@ static void *dma_alloc_pages(struct device *dev, unsigned gfp, unsigned order)
*/
void *
dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle,
- unsigned gfp)
+ gfp_t gfp)
{
void *memory;
unsigned long dma_mask = 0;
diff --git a/arch/x86_64/kernel/pci-nommu.c b/arch/x86_64/kernel/pci-nommu.c
index 67d90b89af0b..5a981dca87ff 100644
--- a/arch/x86_64/kernel/pci-nommu.c
+++ b/arch/x86_64/kernel/pci-nommu.c
@@ -24,7 +24,7 @@ EXPORT_SYMBOL(iommu_sac_force);
*/
void *dma_alloc_coherent(struct device *hwdev, size_t size,
- dma_addr_t *dma_handle, unsigned gfp)
+ dma_addr_t *dma_handle, gfp_t gfp)
{
void *ret;
u64 mask;
diff --git a/arch/xtensa/kernel/pci-dma.c b/arch/xtensa/kernel/pci-dma.c
index 84fde258cf85..1ff82268e8ea 100644
--- a/arch/xtensa/kernel/pci-dma.c
+++ b/arch/xtensa/kernel/pci-dma.c
@@ -29,7 +29,7 @@
*/
void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp)
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
{
void *ret;
diff --git a/drivers/base/attribute_container.c b/drivers/base/attribute_container.c
index 6b2eb6f39b4d..2a7d7ae83e1e 100644
--- a/drivers/base/attribute_container.c
+++ b/drivers/base/attribute_container.c
@@ -19,6 +19,8 @@
#include
#include
+#include "base.h"
+
/* This is a private structure used to tie the classdev and the
* container .. it should never be visible outside this file */
struct internal_container {
diff --git a/drivers/base/base.h b/drivers/base/base.h
index 783752b68a9a..e3b548d46cff 100644
--- a/drivers/base/base.h
+++ b/drivers/base/base.h
@@ -1,3 +1,15 @@
+
+/* initialisation functions */
+
+extern int devices_init(void);
+extern int buses_init(void);
+extern int classes_init(void);
+extern int firmware_init(void);
+extern int platform_bus_init(void);
+extern int system_bus_init(void);
+extern int cpu_dev_init(void);
+extern int attribute_container_init(void);
+
extern int bus_add_device(struct device * dev);
extern void bus_remove_device(struct device * dev);
diff --git a/drivers/base/class.c b/drivers/base/class.c
index ce23dc8c18c5..c3e569730afe 100644
--- a/drivers/base/class.c
+++ b/drivers/base/class.c
@@ -99,7 +99,8 @@ struct class * class_get(struct class * cls)
void class_put(struct class * cls)
{
- subsys_put(&cls->subsys);
+ if (cls)
+ subsys_put(&cls->subsys);
}
@@ -165,14 +166,25 @@ void class_unregister(struct class * cls)
static void class_create_release(struct class *cls)
{
+ pr_debug("%s called for %s\n", __FUNCTION__, cls->name);
kfree(cls);
}
static void class_device_create_release(struct class_device *class_dev)
{
+ pr_debug("%s called for %s\n", __FUNCTION__, class_dev->class_id);
kfree(class_dev);
}
+/* needed to allow these devices to have parent class devices */
+static int class_device_create_hotplug(struct class_device *class_dev,
+ char **envp, int num_envp,
+ char *buffer, int buffer_size)
+{
+ pr_debug("%s called for %s\n", __FUNCTION__, class_dev->class_id);
+ return 0;
+}
+
/**
* class_create - create a struct class structure
* @owner: pointer to the module that is to "own" this struct class
@@ -301,10 +313,12 @@ static void class_dev_release(struct kobject * kobj)
kfree(cd->devt_attr);
cd->devt_attr = NULL;
- if (cls->release)
+ if (cd->release)
+ cd->release(cd);
+ else if (cls->release)
cls->release(cd);
else {
- printk(KERN_ERR "Device class '%s' does not have a release() function, "
+ printk(KERN_ERR "Class Device '%s' does not have a release() function, "
"it is broken and must be fixed.\n",
cd->class_id);
WARN_ON(1);
@@ -382,14 +396,18 @@ static int class_hotplug(struct kset *kset, struct kobject *kobj, char **envp,
buffer = &buffer[length];
buffer_size -= length;
- if (class_dev->class->hotplug) {
- /* have the bus specific function add its stuff */
- retval = class_dev->class->hotplug (class_dev, envp, num_envp,
- buffer, buffer_size);
- if (retval) {
- pr_debug ("%s - hotplug() returned %d\n",
- __FUNCTION__, retval);
- }
+ if (class_dev->hotplug) {
+ /* have the class device specific function add its stuff */
+ retval = class_dev->hotplug(class_dev, envp, num_envp,
+ buffer, buffer_size);
+ if (retval)
+ pr_debug("class_dev->hotplug() returned %d\n", retval);
+ } else if (class_dev->class->hotplug) {
+ /* have the class specific function add its stuff */
+ retval = class_dev->class->hotplug(class_dev, envp, num_envp,
+ buffer, buffer_size);
+ if (retval)
+ pr_debug("class->hotplug() returned %d\n", retval);
}
return retval;
@@ -442,6 +460,13 @@ static ssize_t show_dev(struct class_device *class_dev, char *buf)
return print_dev_t(buf, class_dev->devt);
}
+static ssize_t store_uevent(struct class_device *class_dev,
+ const char *buf, size_t count)
+{
+ kobject_hotplug(&class_dev->kobj, KOBJ_ADD);
+ return count;
+}
+
void class_device_initialize(struct class_device *class_dev)
{
kobj_set_kset_s(class_dev, class_obj_subsys);
@@ -469,34 +494,45 @@ static char *make_class_name(struct class_device *class_dev)
int class_device_add(struct class_device *class_dev)
{
- struct class * parent = NULL;
- struct class_interface * class_intf;
+ struct class *parent_class = NULL;
+ struct class_device *parent_class_dev = NULL;
+ struct class_interface *class_intf;
char *class_name = NULL;
- int error;
+ int error = -EINVAL;
class_dev = class_device_get(class_dev);
if (!class_dev)
return -EINVAL;
- if (!strlen(class_dev->class_id)) {
- error = -EINVAL;
+ if (!strlen(class_dev->class_id))
goto register_done;
- }
- parent = class_get(class_dev->class);
+ parent_class = class_get(class_dev->class);
+ if (!parent_class)
+ goto register_done;
+ parent_class_dev = class_device_get(class_dev->parent);
pr_debug("CLASS: registering class device: ID = '%s'\n",
class_dev->class_id);
/* first, register with generic layer. */
kobject_set_name(&class_dev->kobj, "%s", class_dev->class_id);
- if (parent)
- class_dev->kobj.parent = &parent->subsys.kset.kobj;
+ if (parent_class_dev)
+ class_dev->kobj.parent = &parent_class_dev->kobj;
+ else
+ class_dev->kobj.parent = &parent_class->subsys.kset.kobj;
- if ((error = kobject_add(&class_dev->kobj)))
+ error = kobject_add(&class_dev->kobj);
+ if (error)
goto register_done;
/* add the needed attributes to this device */
+ class_dev->uevent_attr.attr.name = "uevent";
+ class_dev->uevent_attr.attr.mode = S_IWUSR;
+ class_dev->uevent_attr.attr.owner = parent_class->owner;
+ class_dev->uevent_attr.store = store_uevent;
+ class_device_create_file(class_dev, &class_dev->uevent_attr);
+
if (MAJOR(class_dev->devt)) {
struct class_device_attribute *attr;
attr = kzalloc(sizeof(*attr), GFP_KERNEL);
@@ -505,12 +541,10 @@ int class_device_add(struct class_device *class_dev)
kobject_del(&class_dev->kobj);
goto register_done;
}
-
attr->attr.name = "dev";
attr->attr.mode = S_IRUGO;
- attr->attr.owner = parent->owner;
+ attr->attr.owner = parent_class->owner;
attr->show = show_dev;
- attr->store = NULL;
class_device_create_file(class_dev, attr);
class_dev->devt_attr = attr;
}
@@ -524,20 +558,23 @@ int class_device_add(struct class_device *class_dev)
class_name);
}
- /* notify any interfaces this device is now here */
- if (parent) {
- down(&parent->sem);
- list_add_tail(&class_dev->node, &parent->children);
- list_for_each_entry(class_intf, &parent->interfaces, node)
- if (class_intf->add)
- class_intf->add(class_dev);
- up(&parent->sem);
- }
kobject_hotplug(&class_dev->kobj, KOBJ_ADD);
+ /* notify any interfaces this device is now here */
+ if (parent_class) {
+ down(&parent_class->sem);
+ list_add_tail(&class_dev->node, &parent_class->children);
+ list_for_each_entry(class_intf, &parent_class->interfaces, node)
+ if (class_intf->add)
+ class_intf->add(class_dev, class_intf);
+ up(&parent_class->sem);
+ }
+
register_done:
- if (error && parent)
- class_put(parent);
+ if (error) {
+ class_put(parent_class);
+ class_device_put(parent_class_dev);
+ }
class_device_put(class_dev);
kfree(class_name);
return error;
@@ -552,21 +589,28 @@ int class_device_register(struct class_device *class_dev)
/**
* class_device_create - creates a class device and registers it with sysfs
* @cs: pointer to the struct class that this device should be registered to.
+ * @parent: pointer to the parent struct class_device of this new device, if any.
* @dev: the dev_t for the char device to be added.
* @device: a pointer to a struct device that is assiociated with this class device.
* @fmt: string for the class device's name
*
* This function can be used by char device classes. A struct
* class_device will be created in sysfs, registered to the specified
- * class. A "dev" file will be created, showing the dev_t for the
- * device. The pointer to the struct class_device will be returned from
- * the call. Any further sysfs files that might be required can be
- * created using this pointer.
+ * class.
+ * A "dev" file will be created, showing the dev_t for the device, if
+ * the dev_t is not 0,0.
+ * If a pointer to a parent struct class_device is passed in, the newly
+ * created struct class_device will be a child of that device in sysfs.
+ * The pointer to the struct class_device will be returned from the
+ * call. Any further sysfs files that might be required can be created
+ * using this pointer.
*
* Note: the struct class passed to this function must have previously
* been created with a call to class_create().
*/
-struct class_device *class_device_create(struct class *cls, dev_t devt,
+struct class_device *class_device_create(struct class *cls,
+ struct class_device *parent,
+ dev_t devt,
struct device *device, char *fmt, ...)
{
va_list args;
@@ -585,6 +629,9 @@ struct class_device *class_device_create(struct class *cls, dev_t devt,
class_dev->devt = devt;
class_dev->dev = device;
class_dev->class = cls;
+ class_dev->parent = parent;
+ class_dev->release = class_device_create_release;
+ class_dev->hotplug = class_device_create_hotplug;
va_start(args, fmt);
vsnprintf(class_dev->class_id, BUS_ID_SIZE, fmt, args);
@@ -602,17 +649,18 @@ error:
void class_device_del(struct class_device *class_dev)
{
- struct class * parent = class_dev->class;
- struct class_interface * class_intf;
+ struct class *parent_class = class_dev->class;
+ struct class_device *parent_device = class_dev->parent;
+ struct class_interface *class_intf;
char *class_name = NULL;
- if (parent) {
- down(&parent->sem);
+ if (parent_class) {
+ down(&parent_class->sem);
list_del_init(&class_dev->node);
- list_for_each_entry(class_intf, &parent->interfaces, node)
+ list_for_each_entry(class_intf, &parent_class->interfaces, node)
if (class_intf->remove)
- class_intf->remove(class_dev);
- up(&parent->sem);
+ class_intf->remove(class_dev, class_intf);
+ up(&parent_class->sem);
}
if (class_dev->dev) {
@@ -620,6 +668,7 @@ void class_device_del(struct class_device *class_dev)
sysfs_remove_link(&class_dev->kobj, "device");
sysfs_remove_link(&class_dev->dev->kobj, class_name);
}
+ class_device_remove_file(class_dev, &class_dev->uevent_attr);
if (class_dev->devt_attr)
class_device_remove_file(class_dev, class_dev->devt_attr);
class_device_remove_attrs(class_dev);
@@ -627,8 +676,8 @@ void class_device_del(struct class_device *class_dev)
kobject_hotplug(&class_dev->kobj, KOBJ_REMOVE);
kobject_del(&class_dev->kobj);
- if (parent)
- class_put(parent);
+ class_device_put(parent_device);
+ class_put(parent_class);
kfree(class_name);
}
@@ -708,7 +757,8 @@ struct class_device * class_device_get(struct class_device *class_dev)
void class_device_put(struct class_device *class_dev)
{
- kobject_put(&class_dev->kobj);
+ if (class_dev)
+ kobject_put(&class_dev->kobj);
}
@@ -728,7 +778,7 @@ int class_interface_register(struct class_interface *class_intf)
list_add_tail(&class_intf->node, &parent->interfaces);
if (class_intf->add) {
list_for_each_entry(class_dev, &parent->children, node)
- class_intf->add(class_dev);
+ class_intf->add(class_dev, class_intf);
}
up(&parent->sem);
@@ -747,7 +797,7 @@ void class_interface_unregister(struct class_interface *class_intf)
list_del_init(&class_intf->node);
if (class_intf->remove) {
list_for_each_entry(class_dev, &parent->children, node)
- class_intf->remove(class_dev);
+ class_intf->remove(class_dev, class_intf);
}
up(&parent->sem);
diff --git a/drivers/base/core.c b/drivers/base/core.c
index 6ab73f5c799a..8615b42b517a 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -154,6 +154,13 @@ static struct kset_hotplug_ops device_hotplug_ops = {
.hotplug = dev_hotplug,
};
+static ssize_t store_uevent(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ kobject_hotplug(&dev->kobj, KOBJ_ADD);
+ return count;
+}
+
/**
* device_subsys - structure to be registered with kobject core.
*/
@@ -225,6 +232,7 @@ void device_initialize(struct device *dev)
klist_children_put);
INIT_LIST_HEAD(&dev->dma_pools);
init_MUTEX(&dev->sem);
+ device_init_wakeup(dev, 0);
}
/**
@@ -258,6 +266,14 @@ int device_add(struct device *dev)
if ((error = kobject_add(&dev->kobj)))
goto Error;
+
+ dev->uevent_attr.attr.name = "uevent";
+ dev->uevent_attr.attr.mode = S_IWUSR;
+ if (dev->driver)
+ dev->uevent_attr.attr.owner = dev->driver->owner;
+ dev->uevent_attr.store = store_uevent;
+ device_create_file(dev, &dev->uevent_attr);
+
kobject_hotplug(&dev->kobj, KOBJ_ADD);
if ((error = device_pm_add(dev)))
goto PMError;
@@ -349,6 +365,7 @@ void device_del(struct device * dev)
if (parent)
klist_del(&dev->knode_parent);
+ device_remove_file(dev, &dev->uevent_attr);
/* Notify the platform of the removal, in case they
* need to do anything...
@@ -390,11 +407,11 @@ static struct device * next_device(struct klist_iter * i)
/**
* device_for_each_child - device child iterator.
- * @dev: parent struct device.
+ * @parent: parent struct device.
* @data: data for the callback.
* @fn: function to be called for each device.
*
- * Iterate over @dev's child devices, and call @fn for each,
+ * Iterate over @parent's child devices, and call @fn for each,
* passing it @data.
*
* We check the return of @fn each time. If it returns anything
diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c
index b79badd0f158..081c927b1ed8 100644
--- a/drivers/base/cpu.c
+++ b/drivers/base/cpu.c
@@ -9,6 +9,7 @@
#include
#include
+#include "base.h"
struct sysdev_class cpu_sysdev_class = {
set_kset_name("cpu"),
diff --git a/drivers/base/driver.c b/drivers/base/driver.c
index ef3fe513e398..161f3a390d90 100644
--- a/drivers/base/driver.c
+++ b/drivers/base/driver.c
@@ -28,6 +28,7 @@ static struct device * next_device(struct klist_iter * i)
/**
* driver_for_each_device - Iterator for devices bound to a driver.
* @drv: Driver we're iterating.
+ * @start: Device to begin with
* @data: Data to pass to the callback.
* @fn: Function to call for each device.
*
@@ -57,7 +58,7 @@ EXPORT_SYMBOL_GPL(driver_for_each_device);
/**
* driver_find_device - device iterator for locating a particular device.
- * @driver: The device's driver
+ * @drv: The device's driver
* @start: Device to begin with
* @data: Data to pass to match function
* @match: Callback function to check device
diff --git a/drivers/base/firmware.c b/drivers/base/firmware.c
index 88ab044932f2..cb1b98ae0d58 100644
--- a/drivers/base/firmware.c
+++ b/drivers/base/firmware.c
@@ -11,6 +11,9 @@
#include
#include
#include
+#include
+
+#include "base.h"
static decl_subsys(firmware, NULL, NULL);
diff --git a/drivers/base/init.c b/drivers/base/init.c
index a76ae5a221f3..84e604e25c4f 100644
--- a/drivers/base/init.c
+++ b/drivers/base/init.c
@@ -10,14 +10,8 @@
#include
#include
-extern int devices_init(void);
-extern int buses_init(void);
-extern int classes_init(void);
-extern int firmware_init(void);
-extern int platform_bus_init(void);
-extern int system_bus_init(void);
-extern int cpu_dev_init(void);
-extern int attribute_container_init(void);
+#include "base.h"
+
/**
* driver_init - initialize driver model.
*
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index 361e204209eb..75ce8711bca5 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -17,6 +17,8 @@
#include
#include
+#include "base.h"
+
struct device platform_bus = {
.bus_id = "platform",
};
@@ -279,13 +281,9 @@ static int platform_suspend(struct device * dev, pm_message_t state)
{
int ret = 0;
- if (dev->driver && dev->driver->suspend) {
- ret = dev->driver->suspend(dev, state, SUSPEND_DISABLE);
- if (ret == 0)
- ret = dev->driver->suspend(dev, state, SUSPEND_SAVE_STATE);
- if (ret == 0)
- ret = dev->driver->suspend(dev, state, SUSPEND_POWER_DOWN);
- }
+ if (dev->driver && dev->driver->suspend)
+ ret = dev->driver->suspend(dev, state);
+
return ret;
}
@@ -293,13 +291,9 @@ static int platform_resume(struct device * dev)
{
int ret = 0;
- if (dev->driver && dev->driver->resume) {
- ret = dev->driver->resume(dev, RESUME_POWER_ON);
- if (ret == 0)
- ret = dev->driver->resume(dev, RESUME_RESTORE_STATE);
- if (ret == 0)
- ret = dev->driver->resume(dev, RESUME_ENABLE);
- }
+ if (dev->driver && dev->driver->resume)
+ ret = dev->driver->resume(dev);
+
return ret;
}
diff --git a/drivers/base/power/sysfs.c b/drivers/base/power/sysfs.c
index 8d04fb435c17..89c57875f3e5 100644
--- a/drivers/base/power/sysfs.c
+++ b/drivers/base/power/sysfs.c
@@ -48,8 +48,81 @@ static ssize_t state_store(struct device * dev, struct device_attribute *attr, c
static DEVICE_ATTR(state, 0644, state_show, state_store);
+/*
+ * wakeup - Report/change current wakeup option for device
+ *
+ * Some devices support "wakeup" events, which are hardware signals
+ * used to activate devices from suspended or low power states. Such
+ * devices have one of three values for the sysfs power/wakeup file:
+ *
+ * + "enabled\n" to issue the events;
+ * + "disabled\n" not to do so; or
+ * + "\n" for temporary or permanent inability to issue wakeup.
+ *
+ * (For example, unconfigured USB devices can't issue wakeups.)
+ *
+ * Familiar examples of devices that can issue wakeup events include
+ * keyboards and mice (both PS2 and USB styles), power buttons, modems,
+ * "Wake-On-LAN" Ethernet links, GPIO lines, and more. Some events
+ * will wake the entire system from a suspend state; others may just
+ * wake up the device (if the system as a whole is already active).
+ * Some wakeup events use normal IRQ lines; other use special out
+ * of band signaling.
+ *
+ * It is the responsibility of device drivers to enable (or disable)
+ * wakeup signaling as part of changing device power states, respecting
+ * the policy choices provided through the driver model.
+ *
+ * Devices may not be able to generate wakeup events from all power
+ * states. Also, the events may be ignored in some configurations;
+ * for example, they might need help from other devices that aren't
+ * active, or which may have wakeup disabled. Some drivers rely on
+ * wakeup events internally (unless they are disabled), keeping
+ * their hardware in low power modes whenever they're unused. This
+ * saves runtime power, without requiring system-wide sleep states.
+ */
+
+static const char enabled[] = "enabled";
+static const char disabled[] = "disabled";
+
+static ssize_t
+wake_show(struct device * dev, struct device_attribute *attr, char * buf)
+{
+ return sprintf(buf, "%s\n", device_can_wakeup(dev)
+ ? (device_may_wakeup(dev) ? enabled : disabled)
+ : "");
+}
+
+static ssize_t
+wake_store(struct device * dev, struct device_attribute *attr,
+ const char * buf, size_t n)
+{
+ char *cp;
+ int len = n;
+
+ if (!device_can_wakeup(dev))
+ return -EINVAL;
+
+ cp = memchr(buf, '\n', n);
+ if (cp)
+ len = cp - buf;
+ if (len == sizeof enabled - 1
+ && strncmp(buf, enabled, sizeof enabled - 1) == 0)
+ device_set_wakeup_enable(dev, 1);
+ else if (len == sizeof disabled - 1
+ && strncmp(buf, disabled, sizeof disabled - 1) == 0)
+ device_set_wakeup_enable(dev, 0);
+ else
+ return -EINVAL;
+ return n;
+}
+
+static DEVICE_ATTR(wakeup, 0644, wake_show, wake_store);
+
+
static struct attribute * power_attrs[] = {
&dev_attr_state.attr,
+ &dev_attr_wakeup.attr,
NULL,
};
static struct attribute_group pm_attr_group = {
diff --git a/drivers/block/aoe/aoe.h b/drivers/block/aoe/aoe.h
index 0e9e586e9ba3..881c48d941b7 100644
--- a/drivers/block/aoe/aoe.h
+++ b/drivers/block/aoe/aoe.h
@@ -1,5 +1,5 @@
/* Copyright (c) 2004 Coraid, Inc. See COPYING for GPL terms. */
-#define VERSION "12"
+#define VERSION "14"
#define AOE_MAJOR 152
#define DEVICE_NAME "aoe"
diff --git a/drivers/block/aoe/aoechr.c b/drivers/block/aoe/aoechr.c
index 45a243096187..41ae0ede619a 100644
--- a/drivers/block/aoe/aoechr.c
+++ b/drivers/block/aoe/aoechr.c
@@ -224,7 +224,7 @@ aoechr_init(void)
return PTR_ERR(aoe_class);
}
for (i = 0; i < ARRAY_SIZE(chardevs); ++i)
- class_device_create(aoe_class,
+ class_device_create(aoe_class, NULL,
MKDEV(AOE_MAJOR, chardevs[i].minor),
NULL, chardevs[i].name);
diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c
index b5be4b7d7b5b..5c9c7c1a3d4c 100644
--- a/drivers/block/aoe/aoecmd.c
+++ b/drivers/block/aoe/aoecmd.c
@@ -8,6 +8,7 @@
#include
#include
#include
+#include
#include "aoe.h"
#define TIMERTICK (HZ / 10)
@@ -311,16 +312,16 @@ ataid_complete(struct aoedev *d, unsigned char *id)
u16 n;
/* word 83: command set supported */
- n = le16_to_cpup((__le16 *) &id[83<<1]);
+ n = le16_to_cpu(get_unaligned((__le16 *) &id[83<<1]));
/* word 86: command set/feature enabled */
- n |= le16_to_cpup((__le16 *) &id[86<<1]);
+ n |= le16_to_cpu(get_unaligned((__le16 *) &id[86<<1]));
if (n & (1<<10)) { /* bit 10: LBA 48 */
d->flags |= DEVFL_EXT;
/* word 100: number lba48 sectors */
- ssize = le64_to_cpup((__le64 *) &id[100<<1]);
+ ssize = le64_to_cpu(get_unaligned((__le64 *) &id[100<<1]));
/* set as in ide-disk.c:init_idedisk_capacity */
d->geo.cylinders = ssize;
@@ -331,12 +332,12 @@ ataid_complete(struct aoedev *d, unsigned char *id)
d->flags &= ~DEVFL_EXT;
/* number lba28 sectors */
- ssize = le32_to_cpup((__le32 *) &id[60<<1]);
+ ssize = le32_to_cpu(get_unaligned((__le32 *) &id[60<<1]));
/* NOTE: obsolete in ATA 6 */
- d->geo.cylinders = le16_to_cpup((__le16 *) &id[54<<1]);
- d->geo.heads = le16_to_cpup((__le16 *) &id[55<<1]);
- d->geo.sectors = le16_to_cpup((__le16 *) &id[56<<1]);
+ d->geo.cylinders = le16_to_cpu(get_unaligned((__le16 *) &id[54<<1]));
+ d->geo.heads = le16_to_cpu(get_unaligned((__le16 *) &id[55<<1]));
+ d->geo.sectors = le16_to_cpu(get_unaligned((__le16 *) &id[56<<1]));
}
d->ssize = ssize;
d->geo.start = 0;
diff --git a/drivers/block/as-iosched.c b/drivers/block/as-iosched.c
index 95c0a3690b0f..4081c36c8c19 100644
--- a/drivers/block/as-iosched.c
+++ b/drivers/block/as-iosched.c
@@ -98,7 +98,6 @@ struct as_data {
struct as_rq *next_arq[2]; /* next in sort order */
sector_t last_sector[2]; /* last REQ_SYNC & REQ_ASYNC sectors */
- struct list_head *dispatch; /* driver dispatch queue */
struct list_head *hash; /* request hash */
unsigned long exit_prob; /* probability a task will exit while
@@ -239,6 +238,25 @@ static struct io_context *as_get_io_context(void)
return ioc;
}
+static void as_put_io_context(struct as_rq *arq)
+{
+ struct as_io_context *aic;
+
+ if (unlikely(!arq->io_context))
+ return;
+
+ aic = arq->io_context->aic;
+
+ if (arq->is_sync == REQ_SYNC && aic) {
+ spin_lock(&aic->lock);
+ set_bit(AS_TASK_IORUNNING, &aic->state);
+ aic->last_end_request = jiffies;
+ spin_unlock(&aic->lock);
+ }
+
+ put_io_context(arq->io_context);
+}
+
/*
* the back merge hash support functions
*/
@@ -261,14 +279,6 @@ static inline void as_del_arq_hash(struct as_rq *arq)
__as_del_arq_hash(arq);
}
-static void as_remove_merge_hints(request_queue_t *q, struct as_rq *arq)
-{
- as_del_arq_hash(arq);
-
- if (q->last_merge == arq->request)
- q->last_merge = NULL;
-}
-
static void as_add_arq_hash(struct as_data *ad, struct as_rq *arq)
{
struct request *rq = arq->request;
@@ -312,7 +322,7 @@ static struct request *as_find_arq_hash(struct as_data *ad, sector_t offset)
BUG_ON(!arq->on_hash);
if (!rq_mergeable(__rq)) {
- as_remove_merge_hints(ad->q, arq);
+ as_del_arq_hash(arq);
continue;
}
@@ -950,23 +960,12 @@ static void as_completed_request(request_queue_t *q, struct request *rq)
WARN_ON(!list_empty(&rq->queuelist));
- if (arq->state == AS_RQ_PRESCHED) {
- WARN_ON(arq->io_context);
- goto out;
- }
-
- if (arq->state == AS_RQ_MERGED)
- goto out_ioc;
-
if (arq->state != AS_RQ_REMOVED) {
printk("arq->state %d\n", arq->state);
WARN_ON(1);
goto out;
}
- if (!blk_fs_request(rq))
- goto out;
-
if (ad->changed_batch && ad->nr_dispatched == 1) {
kblockd_schedule_work(&ad->antic_work);
ad->changed_batch = 0;
@@ -1001,21 +1000,7 @@ static void as_completed_request(request_queue_t *q, struct request *rq)
}
}
-out_ioc:
- if (!arq->io_context)
- goto out;
-
- if (arq->is_sync == REQ_SYNC) {
- struct as_io_context *aic = arq->io_context->aic;
- if (aic) {
- spin_lock(&aic->lock);
- set_bit(AS_TASK_IORUNNING, &aic->state);
- aic->last_end_request = jiffies;
- spin_unlock(&aic->lock);
- }
- }
-
- put_io_context(arq->io_context);
+ as_put_io_context(arq);
out:
arq->state = AS_RQ_POSTSCHED;
}
@@ -1047,72 +1032,10 @@ static void as_remove_queued_request(request_queue_t *q, struct request *rq)
ad->next_arq[data_dir] = as_find_next_arq(ad, arq);
list_del_init(&arq->fifo);
- as_remove_merge_hints(q, arq);
+ as_del_arq_hash(arq);
as_del_arq_rb(ad, arq);
}
-/*
- * as_remove_dispatched_request is called to remove a request which has gone
- * to the dispatch list.
- */
-static void as_remove_dispatched_request(request_queue_t *q, struct request *rq)
-{
- struct as_rq *arq = RQ_DATA(rq);
- struct as_io_context *aic;
-
- if (!arq) {
- WARN_ON(1);
- return;
- }
-
- WARN_ON(arq->state != AS_RQ_DISPATCHED);
- WARN_ON(ON_RB(&arq->rb_node));
- if (arq->io_context && arq->io_context->aic) {
- aic = arq->io_context->aic;
- if (aic) {
- WARN_ON(!atomic_read(&aic->nr_dispatched));
- atomic_dec(&aic->nr_dispatched);
- }
- }
-}
-
-/*
- * as_remove_request is called when a driver has finished with a request.
- * This should be only called for dispatched requests, but for some reason
- * a POWER4 box running hwscan it does not.
- */
-static void as_remove_request(request_queue_t *q, struct request *rq)
-{
- struct as_rq *arq = RQ_DATA(rq);
-
- if (unlikely(arq->state == AS_RQ_NEW))
- goto out;
-
- if (ON_RB(&arq->rb_node)) {
- if (arq->state != AS_RQ_QUEUED) {
- printk("arq->state %d\n", arq->state);
- WARN_ON(1);
- goto out;
- }
- /*
- * We'll lose the aliased request(s) here. I don't think this
- * will ever happen, but if it does, hopefully someone will
- * report it.
- */
- WARN_ON(!list_empty(&rq->queuelist));
- as_remove_queued_request(q, rq);
- } else {
- if (arq->state != AS_RQ_DISPATCHED) {
- printk("arq->state %d\n", arq->state);
- WARN_ON(1);
- goto out;
- }
- as_remove_dispatched_request(q, rq);
- }
-out:
- arq->state = AS_RQ_REMOVED;
-}
-
/*
* as_fifo_expired returns 0 if there are no expired reads on the fifo,
* 1 otherwise. It is ratelimited so that we only perform the check once per
@@ -1165,7 +1088,6 @@ static inline int as_batch_expired(struct as_data *ad)
static void as_move_to_dispatch(struct as_data *ad, struct as_rq *arq)
{
struct request *rq = arq->request;
- struct list_head *insert;
const int data_dir = arq->is_sync;
BUG_ON(!ON_RB(&arq->rb_node));
@@ -1198,13 +1120,13 @@ static void as_move_to_dispatch(struct as_data *ad, struct as_rq *arq)
/*
* take it off the sort and fifo list, add to dispatch queue
*/
- insert = ad->dispatch->prev;
-
while (!list_empty(&rq->queuelist)) {
struct request *__rq = list_entry_rq(rq->queuelist.next);
struct as_rq *__arq = RQ_DATA(__rq);
- list_move_tail(&__rq->queuelist, ad->dispatch);
+ list_del(&__rq->queuelist);
+
+ elv_dispatch_add_tail(ad->q, __rq);
if (__arq->io_context && __arq->io_context->aic)
atomic_inc(&__arq->io_context->aic->nr_dispatched);
@@ -1218,7 +1140,8 @@ static void as_move_to_dispatch(struct as_data *ad, struct as_rq *arq)
as_remove_queued_request(ad->q, rq);
WARN_ON(arq->state != AS_RQ_QUEUED);
- list_add(&rq->queuelist, insert);
+ elv_dispatch_sort(ad->q, rq);
+
arq->state = AS_RQ_DISPATCHED;
if (arq->io_context && arq->io_context->aic)
atomic_inc(&arq->io_context->aic->nr_dispatched);
@@ -1230,12 +1153,42 @@ static void as_move_to_dispatch(struct as_data *ad, struct as_rq *arq)
* read/write expire, batch expire, etc, and moves it to the dispatch
* queue. Returns 1 if a request was found, 0 otherwise.
*/
-static int as_dispatch_request(struct as_data *ad)
+static int as_dispatch_request(request_queue_t *q, int force)
{
+ struct as_data *ad = q->elevator->elevator_data;
struct as_rq *arq;
const int reads = !list_empty(&ad->fifo_list[REQ_SYNC]);
const int writes = !list_empty(&ad->fifo_list[REQ_ASYNC]);
+ if (unlikely(force)) {
+ /*
+ * Forced dispatch, accounting is useless. Reset
+ * accounting states and dump fifo_lists. Note that
+ * batch_data_dir is reset to REQ_SYNC to avoid
+ * screwing write batch accounting as write batch
+ * accounting occurs on W->R transition.
+ */
+ int dispatched = 0;
+
+ ad->batch_data_dir = REQ_SYNC;
+ ad->changed_batch = 0;
+ ad->new_batch = 0;
+
+ while (ad->next_arq[REQ_SYNC]) {
+ as_move_to_dispatch(ad, ad->next_arq[REQ_SYNC]);
+ dispatched++;
+ }
+ ad->last_check_fifo[REQ_SYNC] = jiffies;
+
+ while (ad->next_arq[REQ_ASYNC]) {
+ as_move_to_dispatch(ad, ad->next_arq[REQ_ASYNC]);
+ dispatched++;
+ }
+ ad->last_check_fifo[REQ_ASYNC] = jiffies;
+
+ return dispatched;
+ }
+
/* Signal that the write batch was uncontended, so we can't time it */
if (ad->batch_data_dir == REQ_ASYNC && !reads) {
if (ad->current_write_count == 0 || !writes)
@@ -1359,20 +1312,6 @@ fifo_expired:
return 1;
}
-static struct request *as_next_request(request_queue_t *q)
-{
- struct as_data *ad = q->elevator->elevator_data;
- struct request *rq = NULL;
-
- /*
- * if there are still requests on the dispatch queue, grab the first
- */
- if (!list_empty(ad->dispatch) || as_dispatch_request(ad))
- rq = list_entry_rq(ad->dispatch->next);
-
- return rq;
-}
-
/*
* Add arq to a list behind alias
*/
@@ -1404,17 +1343,25 @@ as_add_aliased_request(struct as_data *ad, struct as_rq *arq, struct as_rq *alia
/*
* Don't want to have to handle merges.
*/
- as_remove_merge_hints(ad->q, arq);
+ as_del_arq_hash(arq);
}
/*
* add arq to rbtree and fifo
*/
-static void as_add_request(struct as_data *ad, struct as_rq *arq)
+static void as_add_request(request_queue_t *q, struct request *rq)
{
+ struct as_data *ad = q->elevator->elevator_data;
+ struct as_rq *arq = RQ_DATA(rq);
struct as_rq *alias;
int data_dir;
+ if (arq->state != AS_RQ_PRESCHED) {
+ printk("arq->state: %d\n", arq->state);
+ WARN_ON(1);
+ }
+ arq->state = AS_RQ_NEW;
+
if (rq_data_dir(arq->request) == READ
|| current->flags&PF_SYNCWRITE)
arq->is_sync = 1;
@@ -1437,12 +1384,8 @@ static void as_add_request(struct as_data *ad, struct as_rq *arq)
arq->expires = jiffies + ad->fifo_expire[data_dir];
list_add_tail(&arq->fifo, &ad->fifo_list[data_dir]);
- if (rq_mergeable(arq->request)) {
+ if (rq_mergeable(arq->request))
as_add_arq_hash(ad, arq);
-
- if (!ad->q->last_merge)
- ad->q->last_merge = arq->request;
- }
as_update_arq(ad, arq); /* keep state machine up to date */
} else {
@@ -1463,96 +1406,24 @@ static void as_add_request(struct as_data *ad, struct as_rq *arq)
arq->state = AS_RQ_QUEUED;
}
+static void as_activate_request(request_queue_t *q, struct request *rq)
+{
+ struct as_rq *arq = RQ_DATA(rq);
+
+ WARN_ON(arq->state != AS_RQ_DISPATCHED);
+ arq->state = AS_RQ_REMOVED;
+ if (arq->io_context && arq->io_context->aic)
+ atomic_dec(&arq->io_context->aic->nr_dispatched);
+}
+
static void as_deactivate_request(request_queue_t *q, struct request *rq)
{
- struct as_data *ad = q->elevator->elevator_data;
struct as_rq *arq = RQ_DATA(rq);
- if (arq) {
- if (arq->state == AS_RQ_REMOVED) {
- arq->state = AS_RQ_DISPATCHED;
- if (arq->io_context && arq->io_context->aic)
- atomic_inc(&arq->io_context->aic->nr_dispatched);
- }
- } else
- WARN_ON(blk_fs_request(rq)
- && (!(rq->flags & (REQ_HARDBARRIER|REQ_SOFTBARRIER))) );
-
- /* Stop anticipating - let this request get through */
- as_antic_stop(ad);
-}
-
-/*
- * requeue the request. The request has not been completed, nor is it a
- * new request, so don't touch accounting.
- */
-static void as_requeue_request(request_queue_t *q, struct request *rq)
-{
- as_deactivate_request(q, rq);
- list_add(&rq->queuelist, &q->queue_head);
-}
-
-/*
- * Account a request that is inserted directly onto the dispatch queue.
- * arq->io_context->aic->nr_dispatched should not need to be incremented
- * because only new requests should come through here: requeues go through
- * our explicit requeue handler.
- */
-static void as_account_queued_request(struct as_data *ad, struct request *rq)
-{
- if (blk_fs_request(rq)) {
- struct as_rq *arq = RQ_DATA(rq);
- arq->state = AS_RQ_DISPATCHED;
- ad->nr_dispatched++;
- }
-}
-
-static void
-as_insert_request(request_queue_t *q, struct request *rq, int where)
-{
- struct as_data *ad = q->elevator->elevator_data;
- struct as_rq *arq = RQ_DATA(rq);
-
- if (arq) {
- if (arq->state != AS_RQ_PRESCHED) {
- printk("arq->state: %d\n", arq->state);
- WARN_ON(1);
- }
- arq->state = AS_RQ_NEW;
- }
-
- /* barriers must flush the reorder queue */
- if (unlikely(rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)
- && where == ELEVATOR_INSERT_SORT)) {
- WARN_ON(1);
- where = ELEVATOR_INSERT_BACK;
- }
-
- switch (where) {
- case ELEVATOR_INSERT_BACK:
- while (ad->next_arq[REQ_SYNC])
- as_move_to_dispatch(ad, ad->next_arq[REQ_SYNC]);
-
- while (ad->next_arq[REQ_ASYNC])
- as_move_to_dispatch(ad, ad->next_arq[REQ_ASYNC]);
-
- list_add_tail(&rq->queuelist, ad->dispatch);
- as_account_queued_request(ad, rq);
- as_antic_stop(ad);
- break;
- case ELEVATOR_INSERT_FRONT:
- list_add(&rq->queuelist, ad->dispatch);
- as_account_queued_request(ad, rq);
- as_antic_stop(ad);
- break;
- case ELEVATOR_INSERT_SORT:
- BUG_ON(!blk_fs_request(rq));
- as_add_request(ad, arq);
- break;
- default:
- BUG();
- return;
- }
+ WARN_ON(arq->state != AS_RQ_REMOVED);
+ arq->state = AS_RQ_DISPATCHED;
+ if (arq->io_context && arq->io_context->aic)
+ atomic_inc(&arq->io_context->aic->nr_dispatched);
}
/*
@@ -1565,12 +1436,8 @@ static int as_queue_empty(request_queue_t *q)
{
struct as_data *ad = q->elevator->elevator_data;
- if (!list_empty(&ad->fifo_list[REQ_ASYNC])
- || !list_empty(&ad->fifo_list[REQ_SYNC])
- || !list_empty(ad->dispatch))
- return 0;
-
- return 1;
+ return list_empty(&ad->fifo_list[REQ_ASYNC])
+ && list_empty(&ad->fifo_list[REQ_SYNC]);
}
static struct request *
@@ -1607,15 +1474,6 @@ as_merge(request_queue_t *q, struct request **req, struct bio *bio)
struct request *__rq;
int ret;
- /*
- * try last_merge to avoid going to hash
- */
- ret = elv_try_last_merge(q, bio);
- if (ret != ELEVATOR_NO_MERGE) {
- __rq = q->last_merge;
- goto out_insert;
- }
-
/*
* see if the merge hash can satisfy a back merge
*/
@@ -1644,9 +1502,6 @@ as_merge(request_queue_t *q, struct request **req, struct bio *bio)
return ELEVATOR_NO_MERGE;
out:
- if (rq_mergeable(__rq))
- q->last_merge = __rq;
-out_insert:
if (ret) {
if (rq_mergeable(__rq))
as_hot_arq_hash(ad, RQ_DATA(__rq));
@@ -1693,9 +1548,6 @@ static void as_merged_request(request_queue_t *q, struct request *req)
* behind the disk head. We currently don't bother adjusting.
*/
}
-
- if (arq->on_hash)
- q->last_merge = req;
}
static void
@@ -1763,6 +1615,7 @@ as_merged_requests(request_queue_t *q, struct request *req,
* kill knowledge of next, this one is a goner
*/
as_remove_queued_request(q, next);
+ as_put_io_context(anext);
anext->state = AS_RQ_MERGED;
}
@@ -1782,7 +1635,7 @@ static void as_work_handler(void *data)
unsigned long flags;
spin_lock_irqsave(q->queue_lock, flags);
- if (as_next_request(q))
+ if (!as_queue_empty(q))
q->request_fn(q);
spin_unlock_irqrestore(q->queue_lock, flags);
}
@@ -1797,7 +1650,9 @@ static void as_put_request(request_queue_t *q, struct request *rq)
return;
}
- if (arq->state != AS_RQ_POSTSCHED && arq->state != AS_RQ_PRESCHED) {
+ if (unlikely(arq->state != AS_RQ_POSTSCHED &&
+ arq->state != AS_RQ_PRESCHED &&
+ arq->state != AS_RQ_MERGED)) {
printk("arq->state %d\n", arq->state);
WARN_ON(1);
}
@@ -1807,7 +1662,7 @@ static void as_put_request(request_queue_t *q, struct request *rq)
}
static int as_set_request(request_queue_t *q, struct request *rq,
- struct bio *bio, int gfp_mask)
+ struct bio *bio, gfp_t gfp_mask)
{
struct as_data *ad = q->elevator->elevator_data;
struct as_rq *arq = mempool_alloc(ad->arq_pool, gfp_mask);
@@ -1907,7 +1762,6 @@ static int as_init_queue(request_queue_t *q, elevator_t *e)
INIT_LIST_HEAD(&ad->fifo_list[REQ_ASYNC]);
ad->sort_list[REQ_SYNC] = RB_ROOT;
ad->sort_list[REQ_ASYNC] = RB_ROOT;
- ad->dispatch = &q->queue_head;
ad->fifo_expire[REQ_SYNC] = default_read_expire;
ad->fifo_expire[REQ_ASYNC] = default_write_expire;
ad->antic_expire = default_antic_expire;
@@ -2072,10 +1926,9 @@ static struct elevator_type iosched_as = {
.elevator_merge_fn = as_merge,
.elevator_merged_fn = as_merged_request,
.elevator_merge_req_fn = as_merged_requests,
- .elevator_next_req_fn = as_next_request,
- .elevator_add_req_fn = as_insert_request,
- .elevator_remove_req_fn = as_remove_request,
- .elevator_requeue_req_fn = as_requeue_request,
+ .elevator_dispatch_fn = as_dispatch_request,
+ .elevator_add_req_fn = as_add_request,
+ .elevator_activate_req_fn = as_activate_request,
.elevator_deactivate_req_fn = as_deactivate_request,
.elevator_queue_empty_fn = as_queue_empty,
.elevator_completed_req_fn = as_completed_request,
diff --git a/drivers/block/cfq-iosched.c b/drivers/block/cfq-iosched.c
index cd056e7e64ec..94690e4d41e0 100644
--- a/drivers/block/cfq-iosched.c
+++ b/drivers/block/cfq-iosched.c
@@ -84,7 +84,6 @@ static int cfq_max_depth = 2;
(node)->rb_left = NULL; \
} while (0)
#define RB_CLEAR_ROOT(root) ((root)->rb_node = NULL)
-#define ON_RB(node) ((node)->rb_color != RB_NONE)
#define rb_entry_crq(node) rb_entry((node), struct cfq_rq, rb_node)
#define rq_rb_key(rq) (rq)->sector
@@ -271,10 +270,7 @@ CFQ_CFQQ_FNS(expired);
#undef CFQ_CFQQ_FNS
enum cfq_rq_state_flags {
- CFQ_CRQ_FLAG_in_flight = 0,
- CFQ_CRQ_FLAG_in_driver,
- CFQ_CRQ_FLAG_is_sync,
- CFQ_CRQ_FLAG_requeued,
+ CFQ_CRQ_FLAG_is_sync = 0,
};
#define CFQ_CRQ_FNS(name) \
@@ -291,14 +287,11 @@ static inline int cfq_crq_##name(const struct cfq_rq *crq) \
return (crq->crq_flags & (1 << CFQ_CRQ_FLAG_##name)) != 0; \
}
-CFQ_CRQ_FNS(in_flight);
-CFQ_CRQ_FNS(in_driver);
CFQ_CRQ_FNS(is_sync);
-CFQ_CRQ_FNS(requeued);
#undef CFQ_CRQ_FNS
static struct cfq_queue *cfq_find_cfq_hash(struct cfq_data *, unsigned int, unsigned short);
-static void cfq_dispatch_sort(request_queue_t *, struct cfq_rq *);
+static void cfq_dispatch_insert(request_queue_t *, struct cfq_rq *);
static void cfq_put_cfqd(struct cfq_data *cfqd);
#define process_sync(tsk) ((tsk)->flags & PF_SYNCWRITE)
@@ -311,14 +304,6 @@ static inline void cfq_del_crq_hash(struct cfq_rq *crq)
hlist_del_init(&crq->hash);
}
-static void cfq_remove_merge_hints(request_queue_t *q, struct cfq_rq *crq)
-{
- cfq_del_crq_hash(crq);
-
- if (q->last_merge == crq->request)
- q->last_merge = NULL;
-}
-
static inline void cfq_add_crq_hash(struct cfq_data *cfqd, struct cfq_rq *crq)
{
const int hash_idx = CFQ_MHASH_FN(rq_hash_key(crq->request));
@@ -347,18 +332,13 @@ static struct request *cfq_find_rq_hash(struct cfq_data *cfqd, sector_t offset)
return NULL;
}
-static inline int cfq_pending_requests(struct cfq_data *cfqd)
-{
- return !list_empty(&cfqd->queue->queue_head) || cfqd->busy_queues;
-}
-
/*
* scheduler run of queue, if there are requests pending and no one in the
* driver that will restart queueing
*/
static inline void cfq_schedule_dispatch(struct cfq_data *cfqd)
{
- if (!cfqd->rq_in_driver && cfq_pending_requests(cfqd))
+ if (!cfqd->rq_in_driver && cfqd->busy_queues)
kblockd_schedule_work(&cfqd->unplug_work);
}
@@ -366,7 +346,7 @@ static int cfq_queue_empty(request_queue_t *q)
{
struct cfq_data *cfqd = q->elevator->elevator_data;
- return !cfq_pending_requests(cfqd);
+ return !cfqd->busy_queues;
}
/*
@@ -386,11 +366,6 @@ cfq_choose_req(struct cfq_data *cfqd, struct cfq_rq *crq1, struct cfq_rq *crq2)
if (crq2 == NULL)
return crq1;
- if (cfq_crq_requeued(crq1) && !cfq_crq_requeued(crq2))
- return crq1;
- else if (cfq_crq_requeued(crq2) && !cfq_crq_requeued(crq1))
- return crq2;
-
if (cfq_crq_is_sync(crq1) && !cfq_crq_is_sync(crq2))
return crq1;
else if (cfq_crq_is_sync(crq2) && !cfq_crq_is_sync(crq1))
@@ -461,10 +436,7 @@ cfq_find_next_crq(struct cfq_data *cfqd, struct cfq_queue *cfqq,
struct cfq_rq *crq_next = NULL, *crq_prev = NULL;
struct rb_node *rbnext, *rbprev;
- rbnext = NULL;
- if (ON_RB(&last->rb_node))
- rbnext = rb_next(&last->rb_node);
- if (!rbnext) {
+ if (!(rbnext = rb_next(&last->rb_node))) {
rbnext = rb_first(&cfqq->sort_list);
if (rbnext == &last->rb_node)
rbnext = NULL;
@@ -545,13 +517,13 @@ static void cfq_resort_rr_list(struct cfq_queue *cfqq, int preempted)
* the pending list according to last request service
*/
static inline void
-cfq_add_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq, int requeue)
+cfq_add_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq)
{
BUG_ON(cfq_cfqq_on_rr(cfqq));
cfq_mark_cfqq_on_rr(cfqq);
cfqd->busy_queues++;
- cfq_resort_rr_list(cfqq, requeue);
+ cfq_resort_rr_list(cfqq, 0);
}
static inline void
@@ -571,22 +543,19 @@ cfq_del_cfqq_rr(struct cfq_data *cfqd, struct cfq_queue *cfqq)
static inline void cfq_del_crq_rb(struct cfq_rq *crq)
{
struct cfq_queue *cfqq = crq->cfq_queue;
+ struct cfq_data *cfqd = cfqq->cfqd;
+ const int sync = cfq_crq_is_sync(crq);
- if (ON_RB(&crq->rb_node)) {
- struct cfq_data *cfqd = cfqq->cfqd;
- const int sync = cfq_crq_is_sync(crq);
+ BUG_ON(!cfqq->queued[sync]);
+ cfqq->queued[sync]--;
- BUG_ON(!cfqq->queued[sync]);
- cfqq->queued[sync]--;
+ cfq_update_next_crq(crq);
- cfq_update_next_crq(crq);
+ rb_erase(&crq->rb_node, &cfqq->sort_list);
+ RB_CLEAR_COLOR(&crq->rb_node);
- rb_erase(&crq->rb_node, &cfqq->sort_list);
- RB_CLEAR_COLOR(&crq->rb_node);
-
- if (cfq_cfqq_on_rr(cfqq) && RB_EMPTY(&cfqq->sort_list))
- cfq_del_cfqq_rr(cfqd, cfqq);
- }
+ if (cfq_cfqq_on_rr(cfqq) && RB_EMPTY(&cfqq->sort_list))
+ cfq_del_cfqq_rr(cfqd, cfqq);
}
static struct cfq_rq *
@@ -627,12 +596,12 @@ static void cfq_add_crq_rb(struct cfq_rq *crq)
* if that happens, put the alias on the dispatch list
*/
while ((__alias = __cfq_add_crq_rb(crq)) != NULL)
- cfq_dispatch_sort(cfqd->queue, __alias);
+ cfq_dispatch_insert(cfqd->queue, __alias);
rb_insert_color(&crq->rb_node, &cfqq->sort_list);
if (!cfq_cfqq_on_rr(cfqq))
- cfq_add_cfqq_rr(cfqd, cfqq, cfq_crq_requeued(crq));
+ cfq_add_cfqq_rr(cfqd, cfqq);
/*
* check if this request is a better next-serve candidate
@@ -643,10 +612,8 @@ static void cfq_add_crq_rb(struct cfq_rq *crq)
static inline void
cfq_reposition_crq_rb(struct cfq_queue *cfqq, struct cfq_rq *crq)
{
- if (ON_RB(&crq->rb_node)) {
- rb_erase(&crq->rb_node, &cfqq->sort_list);
- cfqq->queued[cfq_crq_is_sync(crq)]--;
- }
+ rb_erase(&crq->rb_node, &cfqq->sort_list);
+ cfqq->queued[cfq_crq_is_sync(crq)]--;
cfq_add_crq_rb(crq);
}
@@ -676,49 +643,28 @@ out:
return NULL;
}
+static void cfq_activate_request(request_queue_t *q, struct request *rq)
+{
+ struct cfq_data *cfqd = q->elevator->elevator_data;
+
+ cfqd->rq_in_driver++;
+}
+
static void cfq_deactivate_request(request_queue_t *q, struct request *rq)
{
struct cfq_data *cfqd = q->elevator->elevator_data;
- struct cfq_rq *crq = RQ_DATA(rq);
- if (crq) {
- struct cfq_queue *cfqq = crq->cfq_queue;
-
- if (cfq_crq_in_driver(crq)) {
- cfq_clear_crq_in_driver(crq);
- WARN_ON(!cfqd->rq_in_driver);
- cfqd->rq_in_driver--;
- }
- if (cfq_crq_in_flight(crq)) {
- const int sync = cfq_crq_is_sync(crq);
-
- cfq_clear_crq_in_flight(crq);
- WARN_ON(!cfqq->on_dispatch[sync]);
- cfqq->on_dispatch[sync]--;
- }
- cfq_mark_crq_requeued(crq);
- }
+ WARN_ON(!cfqd->rq_in_driver);
+ cfqd->rq_in_driver--;
}
-/*
- * make sure the service time gets corrected on reissue of this request
- */
-static void cfq_requeue_request(request_queue_t *q, struct request *rq)
-{
- cfq_deactivate_request(q, rq);
- list_add(&rq->queuelist, &q->queue_head);
-}
-
-static void cfq_remove_request(request_queue_t *q, struct request *rq)
+static void cfq_remove_request(struct request *rq)
{
struct cfq_rq *crq = RQ_DATA(rq);
- if (crq) {
- list_del_init(&rq->queuelist);
- cfq_del_crq_rb(crq);
- cfq_remove_merge_hints(q, crq);
-
- }
+ list_del_init(&rq->queuelist);
+ cfq_del_crq_rb(crq);
+ cfq_del_crq_hash(crq);
}
static int
@@ -728,12 +674,6 @@ cfq_merge(request_queue_t *q, struct request **req, struct bio *bio)
struct request *__rq;
int ret;
- ret = elv_try_last_merge(q, bio);
- if (ret != ELEVATOR_NO_MERGE) {
- __rq = q->last_merge;
- goto out_insert;
- }
-
__rq = cfq_find_rq_hash(cfqd, bio->bi_sector);
if (__rq && elv_rq_merge_ok(__rq, bio)) {
ret = ELEVATOR_BACK_MERGE;
@@ -748,8 +688,6 @@ cfq_merge(request_queue_t *q, struct request **req, struct bio *bio)
return ELEVATOR_NO_MERGE;
out:
- q->last_merge = __rq;
-out_insert:
*req = __rq;
return ret;
}
@@ -762,14 +700,12 @@ static void cfq_merged_request(request_queue_t *q, struct request *req)
cfq_del_crq_hash(crq);
cfq_add_crq_hash(cfqd, crq);
- if (ON_RB(&crq->rb_node) && (rq_rb_key(req) != crq->rb_key)) {
+ if (rq_rb_key(req) != crq->rb_key) {
struct cfq_queue *cfqq = crq->cfq_queue;
cfq_update_next_crq(crq);
cfq_reposition_crq_rb(cfqq, crq);
}
-
- q->last_merge = req;
}
static void
@@ -785,7 +721,7 @@ cfq_merged_requests(request_queue_t *q, struct request *rq,
time_before(next->start_time, rq->start_time))
list_move(&rq->queuelist, &next->queuelist);
- cfq_remove_request(q, next);
+ cfq_remove_request(next);
}
static inline void
@@ -992,53 +928,15 @@ static int cfq_arm_slice_timer(struct cfq_data *cfqd, struct cfq_queue *cfqq)
return 1;
}
-/*
- * we dispatch cfqd->cfq_quantum requests in total from the rr_list queues,
- * this function sector sorts the selected request to minimize seeks. we start
- * at cfqd->last_sector, not 0.
- */
-static void cfq_dispatch_sort(request_queue_t *q, struct cfq_rq *crq)
+static void cfq_dispatch_insert(request_queue_t *q, struct cfq_rq *crq)
{
struct cfq_data *cfqd = q->elevator->elevator_data;
struct cfq_queue *cfqq = crq->cfq_queue;
- struct list_head *head = &q->queue_head, *entry = head;
- struct request *__rq;
- sector_t last;
-
- list_del(&crq->request->queuelist);
-
- last = cfqd->last_sector;
- list_for_each_entry_reverse(__rq, head, queuelist) {
- struct cfq_rq *__crq = RQ_DATA(__rq);
-
- if (blk_barrier_rq(__rq))
- break;
- if (!blk_fs_request(__rq))
- break;
- if (cfq_crq_requeued(__crq))
- break;
-
- if (__rq->sector <= crq->request->sector)
- break;
- if (__rq->sector > last && crq->request->sector < last) {
- last = crq->request->sector + crq->request->nr_sectors;
- break;
- }
- entry = &__rq->queuelist;
- }
-
- cfqd->last_sector = last;
cfqq->next_crq = cfq_find_next_crq(cfqd, cfqq, crq);
-
- cfq_del_crq_rb(crq);
- cfq_remove_merge_hints(q, crq);
-
- cfq_mark_crq_in_flight(crq);
- cfq_clear_crq_requeued(crq);
-
+ cfq_remove_request(crq->request);
cfqq->on_dispatch[cfq_crq_is_sync(crq)]++;
- list_add_tail(&crq->request->queuelist, entry);
+ elv_dispatch_sort(q, crq->request);
}
/*
@@ -1159,7 +1057,7 @@ __cfq_dispatch_requests(struct cfq_data *cfqd, struct cfq_queue *cfqq,
/*
* finally, insert request into driver dispatch list
*/
- cfq_dispatch_sort(cfqd->queue, crq);
+ cfq_dispatch_insert(cfqd->queue, crq);
cfqd->dispatch_slice++;
dispatched++;
@@ -1194,7 +1092,7 @@ __cfq_dispatch_requests(struct cfq_data *cfqd, struct cfq_queue *cfqq,
}
static int
-cfq_dispatch_requests(request_queue_t *q, int max_dispatch, int force)
+cfq_dispatch_requests(request_queue_t *q, int force)
{
struct cfq_data *cfqd = q->elevator->elevator_data;
struct cfq_queue *cfqq;
@@ -1204,12 +1102,25 @@ cfq_dispatch_requests(request_queue_t *q, int max_dispatch, int force)
cfqq = cfq_select_queue(cfqd, force);
if (cfqq) {
+ int max_dispatch;
+
+ /*
+ * if idle window is disabled, allow queue buildup
+ */
+ if (!cfq_cfqq_idle_window(cfqq) &&
+ cfqd->rq_in_driver >= cfqd->cfq_max_depth)
+ return 0;
+
cfq_clear_cfqq_must_dispatch(cfqq);
cfq_clear_cfqq_wait_request(cfqq);
del_timer(&cfqd->idle_slice_timer);
- if (cfq_class_idle(cfqq))
- max_dispatch = 1;
+ if (!force) {
+ max_dispatch = cfqd->cfq_quantum;
+ if (cfq_class_idle(cfqq))
+ max_dispatch = 1;
+ } else
+ max_dispatch = INT_MAX;
return __cfq_dispatch_requests(cfqd, cfqq, max_dispatch);
}
@@ -1217,93 +1128,6 @@ cfq_dispatch_requests(request_queue_t *q, int max_dispatch, int force)
return 0;
}
-static inline void cfq_account_dispatch(struct cfq_rq *crq)
-{
- struct cfq_queue *cfqq = crq->cfq_queue;
- struct cfq_data *cfqd = cfqq->cfqd;
-
- if (unlikely(!blk_fs_request(crq->request)))
- return;
-
- /*
- * accounted bit is necessary since some drivers will call
- * elv_next_request() many times for the same request (eg ide)
- */
- if (cfq_crq_in_driver(crq))
- return;
-
- cfq_mark_crq_in_driver(crq);
- cfqd->rq_in_driver++;
-}
-
-static inline void
-cfq_account_completion(struct cfq_queue *cfqq, struct cfq_rq *crq)
-{
- struct cfq_data *cfqd = cfqq->cfqd;
- unsigned long now;
-
- if (!cfq_crq_in_driver(crq))
- return;
-
- now = jiffies;
-
- WARN_ON(!cfqd->rq_in_driver);
- cfqd->rq_in_driver--;
-
- if (!cfq_class_idle(cfqq))
- cfqd->last_end_request = now;
-
- if (!cfq_cfqq_dispatched(cfqq)) {
- if (cfq_cfqq_on_rr(cfqq)) {
- cfqq->service_last = now;
- cfq_resort_rr_list(cfqq, 0);
- }
- if (cfq_cfqq_expired(cfqq)) {
- __cfq_slice_expired(cfqd, cfqq, 0);
- cfq_schedule_dispatch(cfqd);
- }
- }
-
- if (cfq_crq_is_sync(crq))
- crq->io_context->last_end_request = now;
-}
-
-static struct request *cfq_next_request(request_queue_t *q)
-{
- struct cfq_data *cfqd = q->elevator->elevator_data;
- struct request *rq;
-
- if (!list_empty(&q->queue_head)) {
- struct cfq_rq *crq;
-dispatch:
- rq = list_entry_rq(q->queue_head.next);
-
- crq = RQ_DATA(rq);
- if (crq) {
- struct cfq_queue *cfqq = crq->cfq_queue;
-
- /*
- * if idle window is disabled, allow queue buildup
- */
- if (!cfq_crq_in_driver(crq) &&
- !cfq_cfqq_idle_window(cfqq) &&
- !blk_barrier_rq(rq) &&
- cfqd->rq_in_driver >= cfqd->cfq_max_depth)
- return NULL;
-
- cfq_remove_merge_hints(q, crq);
- cfq_account_dispatch(crq);
- }
-
- return rq;
- }
-
- if (cfq_dispatch_requests(q, cfqd->cfq_quantum, 0))
- goto dispatch;
-
- return NULL;
-}
-
/*
* task holds one reference to the queue, dropped when task exits. each crq
* in-flight on this queue also holds a reference, dropped when crq is freed.
@@ -1422,7 +1246,7 @@ static void cfq_exit_io_context(struct cfq_io_context *cic)
}
static struct cfq_io_context *
-cfq_alloc_io_context(struct cfq_data *cfqd, int gfp_mask)
+cfq_alloc_io_context(struct cfq_data *cfqd, gfp_t gfp_mask)
{
struct cfq_io_context *cic = kmem_cache_alloc(cfq_ioc_pool, gfp_mask);
@@ -1517,7 +1341,7 @@ static int cfq_ioc_set_ioprio(struct io_context *ioc, unsigned int ioprio)
static struct cfq_queue *
cfq_get_queue(struct cfq_data *cfqd, unsigned int key, unsigned short ioprio,
- int gfp_mask)
+ gfp_t gfp_mask)
{
const int hashval = hash_long(key, CFQ_QHASH_SHIFT);
struct cfq_queue *cfqq, *new_cfqq = NULL;
@@ -1578,7 +1402,7 @@ out:
* cfqq, so we don't need to worry about it disappearing
*/
static struct cfq_io_context *
-cfq_get_io_context(struct cfq_data *cfqd, pid_t pid, int gfp_mask)
+cfq_get_io_context(struct cfq_data *cfqd, pid_t pid, gfp_t gfp_mask)
{
struct io_context *ioc = NULL;
struct cfq_io_context *cic;
@@ -1816,8 +1640,9 @@ cfq_crq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq,
}
}
-static void cfq_enqueue(struct cfq_data *cfqd, struct request *rq)
+static void cfq_insert_request(request_queue_t *q, struct request *rq)
{
+ struct cfq_data *cfqd = q->elevator->elevator_data;
struct cfq_rq *crq = RQ_DATA(rq);
struct cfq_queue *cfqq = crq->cfq_queue;
@@ -1827,66 +1652,43 @@ static void cfq_enqueue(struct cfq_data *cfqd, struct request *rq)
list_add_tail(&rq->queuelist, &cfqq->fifo);
- if (rq_mergeable(rq)) {
+ if (rq_mergeable(rq))
cfq_add_crq_hash(cfqd, crq);
- if (!cfqd->queue->last_merge)
- cfqd->queue->last_merge = rq;
- }
-
cfq_crq_enqueued(cfqd, cfqq, crq);
}
-static void
-cfq_insert_request(request_queue_t *q, struct request *rq, int where)
-{
- struct cfq_data *cfqd = q->elevator->elevator_data;
-
- switch (where) {
- case ELEVATOR_INSERT_BACK:
- while (cfq_dispatch_requests(q, INT_MAX, 1))
- ;
- list_add_tail(&rq->queuelist, &q->queue_head);
- /*
- * If we were idling with pending requests on
- * inactive cfqqs, force dispatching will
- * remove the idle timer and the queue won't
- * be kicked by __make_request() afterward.
- * Kick it here.
- */
- cfq_schedule_dispatch(cfqd);
- break;
- case ELEVATOR_INSERT_FRONT:
- list_add(&rq->queuelist, &q->queue_head);
- break;
- case ELEVATOR_INSERT_SORT:
- BUG_ON(!blk_fs_request(rq));
- cfq_enqueue(cfqd, rq);
- break;
- default:
- printk("%s: bad insert point %d\n", __FUNCTION__,where);
- return;
- }
-}
-
static void cfq_completed_request(request_queue_t *q, struct request *rq)
{
struct cfq_rq *crq = RQ_DATA(rq);
- struct cfq_queue *cfqq;
+ struct cfq_queue *cfqq = crq->cfq_queue;
+ struct cfq_data *cfqd = cfqq->cfqd;
+ const int sync = cfq_crq_is_sync(crq);
+ unsigned long now;
- if (unlikely(!blk_fs_request(rq)))
- return;
+ now = jiffies;
- cfqq = crq->cfq_queue;
+ WARN_ON(!cfqd->rq_in_driver);
+ WARN_ON(!cfqq->on_dispatch[sync]);
+ cfqd->rq_in_driver--;
+ cfqq->on_dispatch[sync]--;
- if (cfq_crq_in_flight(crq)) {
- const int sync = cfq_crq_is_sync(crq);
+ if (!cfq_class_idle(cfqq))
+ cfqd->last_end_request = now;
- WARN_ON(!cfqq->on_dispatch[sync]);
- cfqq->on_dispatch[sync]--;
+ if (!cfq_cfqq_dispatched(cfqq)) {
+ if (cfq_cfqq_on_rr(cfqq)) {
+ cfqq->service_last = now;
+ cfq_resort_rr_list(cfqq, 0);
+ }
+ if (cfq_cfqq_expired(cfqq)) {
+ __cfq_slice_expired(cfqd, cfqq, 0);
+ cfq_schedule_dispatch(cfqd);
+ }
}
- cfq_account_completion(cfqq, crq);
+ if (cfq_crq_is_sync(crq))
+ crq->io_context->last_end_request = now;
}
static struct request *
@@ -2075,7 +1877,7 @@ static void cfq_put_request(request_queue_t *q, struct request *rq)
*/
static int
cfq_set_request(request_queue_t *q, struct request *rq, struct bio *bio,
- int gfp_mask)
+ gfp_t gfp_mask)
{
struct cfq_data *cfqd = q->elevator->elevator_data;
struct task_struct *tsk = current;
@@ -2118,9 +1920,6 @@ cfq_set_request(request_queue_t *q, struct request *rq, struct bio *bio,
INIT_HLIST_NODE(&crq->hash);
crq->cfq_queue = cfqq;
crq->io_context = cic;
- cfq_clear_crq_in_flight(crq);
- cfq_clear_crq_in_driver(crq);
- cfq_clear_crq_requeued(crq);
if (rw == READ || process_sync(tsk))
cfq_mark_crq_is_sync(crq);
@@ -2201,7 +2000,7 @@ static void cfq_idle_slice_timer(unsigned long data)
* only expire and reinvoke request handler, if there are
* other queues with pending requests
*/
- if (!cfq_pending_requests(cfqd)) {
+ if (!cfqd->busy_queues) {
cfqd->idle_slice_timer.expires = min(now + cfqd->cfq_slice_idle, cfqq->slice_end);
add_timer(&cfqd->idle_slice_timer);
goto out_cont;
@@ -2576,10 +2375,9 @@ static struct elevator_type iosched_cfq = {
.elevator_merge_fn = cfq_merge,
.elevator_merged_fn = cfq_merged_request,
.elevator_merge_req_fn = cfq_merged_requests,
- .elevator_next_req_fn = cfq_next_request,
+ .elevator_dispatch_fn = cfq_dispatch_requests,
.elevator_add_req_fn = cfq_insert_request,
- .elevator_remove_req_fn = cfq_remove_request,
- .elevator_requeue_req_fn = cfq_requeue_request,
+ .elevator_activate_req_fn = cfq_activate_request,
.elevator_deactivate_req_fn = cfq_deactivate_request,
.elevator_queue_empty_fn = cfq_queue_empty,
.elevator_completed_req_fn = cfq_completed_request,
diff --git a/drivers/block/deadline-iosched.c b/drivers/block/deadline-iosched.c
index 52a3ae5289a0..7929471d7df7 100644
--- a/drivers/block/deadline-iosched.c
+++ b/drivers/block/deadline-iosched.c
@@ -50,7 +50,6 @@ struct deadline_data {
* next in sort order. read, write or both are NULL
*/
struct deadline_rq *next_drq[2];
- struct list_head *dispatch; /* driver dispatch queue */
struct list_head *hash; /* request hash */
unsigned int batching; /* number of sequential requests made */
sector_t last_sector; /* head position */
@@ -113,15 +112,6 @@ static inline void deadline_del_drq_hash(struct deadline_rq *drq)
__deadline_del_drq_hash(drq);
}
-static void
-deadline_remove_merge_hints(request_queue_t *q, struct deadline_rq *drq)
-{
- deadline_del_drq_hash(drq);
-
- if (q->last_merge == drq->request)
- q->last_merge = NULL;
-}
-
static inline void
deadline_add_drq_hash(struct deadline_data *dd, struct deadline_rq *drq)
{
@@ -239,10 +229,9 @@ deadline_del_drq_rb(struct deadline_data *dd, struct deadline_rq *drq)
dd->next_drq[data_dir] = rb_entry_drq(rbnext);
}
- if (ON_RB(&drq->rb_node)) {
- rb_erase(&drq->rb_node, DRQ_RB_ROOT(dd, drq));
- RB_CLEAR(&drq->rb_node);
- }
+ BUG_ON(!ON_RB(&drq->rb_node));
+ rb_erase(&drq->rb_node, DRQ_RB_ROOT(dd, drq));
+ RB_CLEAR(&drq->rb_node);
}
static struct request *
@@ -286,7 +275,7 @@ deadline_find_first_drq(struct deadline_data *dd, int data_dir)
/*
* add drq to rbtree and fifo
*/
-static inline void
+static void
deadline_add_request(struct request_queue *q, struct request *rq)
{
struct deadline_data *dd = q->elevator->elevator_data;
@@ -301,12 +290,8 @@ deadline_add_request(struct request_queue *q, struct request *rq)
drq->expires = jiffies + dd->fifo_expire[data_dir];
list_add_tail(&drq->fifo, &dd->fifo_list[data_dir]);
- if (rq_mergeable(rq)) {
+ if (rq_mergeable(rq))
deadline_add_drq_hash(dd, drq);
-
- if (!q->last_merge)
- q->last_merge = rq;
- }
}
/*
@@ -315,14 +300,11 @@ deadline_add_request(struct request_queue *q, struct request *rq)
static void deadline_remove_request(request_queue_t *q, struct request *rq)
{
struct deadline_rq *drq = RQ_DATA(rq);
+ struct deadline_data *dd = q->elevator->elevator_data;
- if (drq) {
- struct deadline_data *dd = q->elevator->elevator_data;
-
- list_del_init(&drq->fifo);
- deadline_remove_merge_hints(q, drq);
- deadline_del_drq_rb(dd, drq);
- }
+ list_del_init(&drq->fifo);
+ deadline_del_drq_rb(dd, drq);
+ deadline_del_drq_hash(drq);
}
static int
@@ -332,15 +314,6 @@ deadline_merge(request_queue_t *q, struct request **req, struct bio *bio)
struct request *__rq;
int ret;
- /*
- * try last_merge to avoid going to hash
- */
- ret = elv_try_last_merge(q, bio);
- if (ret != ELEVATOR_NO_MERGE) {
- __rq = q->last_merge;
- goto out_insert;
- }
-
/*
* see if the merge hash can satisfy a back merge
*/
@@ -373,8 +346,6 @@ deadline_merge(request_queue_t *q, struct request **req, struct bio *bio)
return ELEVATOR_NO_MERGE;
out:
- q->last_merge = __rq;
-out_insert:
if (ret)
deadline_hot_drq_hash(dd, RQ_DATA(__rq));
*req = __rq;
@@ -399,8 +370,6 @@ static void deadline_merged_request(request_queue_t *q, struct request *req)
deadline_del_drq_rb(dd, drq);
deadline_add_drq_rb(dd, drq);
}
-
- q->last_merge = req;
}
static void
@@ -452,7 +421,7 @@ deadline_move_to_dispatch(struct deadline_data *dd, struct deadline_rq *drq)
request_queue_t *q = drq->request->q;
deadline_remove_request(q, drq->request);
- list_add_tail(&drq->request->queuelist, dd->dispatch);
+ elv_dispatch_add_tail(q, drq->request);
}
/*
@@ -502,8 +471,9 @@ static inline int deadline_check_fifo(struct deadline_data *dd, int ddir)
* deadline_dispatch_requests selects the best request according to
* read/write expire, fifo_batch, etc
*/
-static int deadline_dispatch_requests(struct deadline_data *dd)
+static int deadline_dispatch_requests(request_queue_t *q, int force)
{
+ struct deadline_data *dd = q->elevator->elevator_data;
const int reads = !list_empty(&dd->fifo_list[READ]);
const int writes = !list_empty(&dd->fifo_list[WRITE]);
struct deadline_rq *drq;
@@ -597,65 +567,12 @@ dispatch_request:
return 1;
}
-static struct request *deadline_next_request(request_queue_t *q)
-{
- struct deadline_data *dd = q->elevator->elevator_data;
- struct request *rq;
-
- /*
- * if there are still requests on the dispatch queue, grab the first one
- */
- if (!list_empty(dd->dispatch)) {
-dispatch:
- rq = list_entry_rq(dd->dispatch->next);
- return rq;
- }
-
- if (deadline_dispatch_requests(dd))
- goto dispatch;
-
- return NULL;
-}
-
-static void
-deadline_insert_request(request_queue_t *q, struct request *rq, int where)
-{
- struct deadline_data *dd = q->elevator->elevator_data;
-
- /* barriers must flush the reorder queue */
- if (unlikely(rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)
- && where == ELEVATOR_INSERT_SORT))
- where = ELEVATOR_INSERT_BACK;
-
- switch (where) {
- case ELEVATOR_INSERT_BACK:
- while (deadline_dispatch_requests(dd))
- ;
- list_add_tail(&rq->queuelist, dd->dispatch);
- break;
- case ELEVATOR_INSERT_FRONT:
- list_add(&rq->queuelist, dd->dispatch);
- break;
- case ELEVATOR_INSERT_SORT:
- BUG_ON(!blk_fs_request(rq));
- deadline_add_request(q, rq);
- break;
- default:
- printk("%s: bad insert point %d\n", __FUNCTION__,where);
- return;
- }
-}
-
static int deadline_queue_empty(request_queue_t *q)
{
struct deadline_data *dd = q->elevator->elevator_data;
- if (!list_empty(&dd->fifo_list[WRITE])
- || !list_empty(&dd->fifo_list[READ])
- || !list_empty(dd->dispatch))
- return 0;
-
- return 1;
+ return list_empty(&dd->fifo_list[WRITE])
+ && list_empty(&dd->fifo_list[READ]);
}
static struct request *
@@ -733,7 +650,6 @@ static int deadline_init_queue(request_queue_t *q, elevator_t *e)
INIT_LIST_HEAD(&dd->fifo_list[WRITE]);
dd->sort_list[READ] = RB_ROOT;
dd->sort_list[WRITE] = RB_ROOT;
- dd->dispatch = &q->queue_head;
dd->fifo_expire[READ] = read_expire;
dd->fifo_expire[WRITE] = write_expire;
dd->writes_starved = writes_starved;
@@ -748,15 +664,13 @@ static void deadline_put_request(request_queue_t *q, struct request *rq)
struct deadline_data *dd = q->elevator->elevator_data;
struct deadline_rq *drq = RQ_DATA(rq);
- if (drq) {
- mempool_free(drq, dd->drq_pool);
- rq->elevator_private = NULL;
- }
+ mempool_free(drq, dd->drq_pool);
+ rq->elevator_private = NULL;
}
static int
deadline_set_request(request_queue_t *q, struct request *rq, struct bio *bio,
- int gfp_mask)
+ gfp_t gfp_mask)
{
struct deadline_data *dd = q->elevator->elevator_data;
struct deadline_rq *drq;
@@ -917,9 +831,8 @@ static struct elevator_type iosched_deadline = {
.elevator_merge_fn = deadline_merge,
.elevator_merged_fn = deadline_merged_request,
.elevator_merge_req_fn = deadline_merged_requests,
- .elevator_next_req_fn = deadline_next_request,
- .elevator_add_req_fn = deadline_insert_request,
- .elevator_remove_req_fn = deadline_remove_request,
+ .elevator_dispatch_fn = deadline_dispatch_requests,
+ .elevator_add_req_fn = deadline_add_request,
.elevator_queue_empty_fn = deadline_queue_empty,
.elevator_former_req_fn = deadline_former_request,
.elevator_latter_req_fn = deadline_latter_request,
diff --git a/drivers/block/elevator.c b/drivers/block/elevator.c
index 98f0126a2deb..55621d5c5774 100644
--- a/drivers/block/elevator.c
+++ b/drivers/block/elevator.c
@@ -34,6 +34,7 @@
#include
#include
#include
+#include
#include
@@ -83,21 +84,11 @@ inline int elv_try_merge(struct request *__rq, struct bio *bio)
}
EXPORT_SYMBOL(elv_try_merge);
-inline int elv_try_last_merge(request_queue_t *q, struct bio *bio)
-{
- if (q->last_merge)
- return elv_try_merge(q->last_merge, bio);
-
- return ELEVATOR_NO_MERGE;
-}
-EXPORT_SYMBOL(elv_try_last_merge);
-
static struct elevator_type *elevator_find(const char *name)
{
struct elevator_type *e = NULL;
struct list_head *entry;
- spin_lock_irq(&elv_list_lock);
list_for_each(entry, &elv_list) {
struct elevator_type *__e;
@@ -108,7 +99,6 @@ static struct elevator_type *elevator_find(const char *name)
break;
}
}
- spin_unlock_irq(&elv_list_lock);
return e;
}
@@ -120,12 +110,15 @@ static void elevator_put(struct elevator_type *e)
static struct elevator_type *elevator_get(const char *name)
{
- struct elevator_type *e = elevator_find(name);
+ struct elevator_type *e;
- if (!e)
- return NULL;
- if (!try_module_get(e->elevator_owner))
- return NULL;
+ spin_lock_irq(&elv_list_lock);
+
+ e = elevator_find(name);
+ if (e && !try_module_get(e->elevator_owner))
+ e = NULL;
+
+ spin_unlock_irq(&elv_list_lock);
return e;
}
@@ -139,8 +132,6 @@ static int elevator_attach(request_queue_t *q, struct elevator_type *e,
eq->ops = &e->ops;
eq->elevator_type = e;
- INIT_LIST_HEAD(&q->queue_head);
- q->last_merge = NULL;
q->elevator = eq;
if (eq->ops->elevator_init_fn)
@@ -153,11 +144,15 @@ static char chosen_elevator[16];
static void elevator_setup_default(void)
{
+ struct elevator_type *e;
+
/*
* check if default is set and exists
*/
- if (chosen_elevator[0] && elevator_find(chosen_elevator))
+ if (chosen_elevator[0] && (e = elevator_get(chosen_elevator))) {
+ elevator_put(e);
return;
+ }
#if defined(CONFIG_IOSCHED_AS)
strcpy(chosen_elevator, "anticipatory");
@@ -186,6 +181,11 @@ int elevator_init(request_queue_t *q, char *name)
struct elevator_queue *eq;
int ret = 0;
+ INIT_LIST_HEAD(&q->queue_head);
+ q->last_merge = NULL;
+ q->end_sector = 0;
+ q->boundary_rq = NULL;
+
elevator_setup_default();
if (!name)
@@ -220,9 +220,52 @@ void elevator_exit(elevator_t *e)
kfree(e);
}
+/*
+ * Insert rq into dispatch queue of q. Queue lock must be held on
+ * entry. If sort != 0, rq is sort-inserted; otherwise, rq will be
+ * appended to the dispatch queue. To be used by specific elevators.
+ */
+void elv_dispatch_sort(request_queue_t *q, struct request *rq)
+{
+ sector_t boundary;
+ struct list_head *entry;
+
+ if (q->last_merge == rq)
+ q->last_merge = NULL;
+
+ boundary = q->end_sector;
+
+ list_for_each_prev(entry, &q->queue_head) {
+ struct request *pos = list_entry_rq(entry);
+
+ if (pos->flags & (REQ_SOFTBARRIER|REQ_HARDBARRIER|REQ_STARTED))
+ break;
+ if (rq->sector >= boundary) {
+ if (pos->sector < boundary)
+ continue;
+ } else {
+ if (pos->sector >= boundary)
+ break;
+ }
+ if (rq->sector >= pos->sector)
+ break;
+ }
+
+ list_add(&rq->queuelist, entry);
+}
+
int elv_merge(request_queue_t *q, struct request **req, struct bio *bio)
{
elevator_t *e = q->elevator;
+ int ret;
+
+ if (q->last_merge) {
+ ret = elv_try_merge(q->last_merge, bio);
+ if (ret != ELEVATOR_NO_MERGE) {
+ *req = q->last_merge;
+ return ret;
+ }
+ }
if (e->ops->elevator_merge_fn)
return e->ops->elevator_merge_fn(q, req, bio);
@@ -236,6 +279,8 @@ void elv_merged_request(request_queue_t *q, struct request *rq)
if (e->ops->elevator_merged_fn)
e->ops->elevator_merged_fn(q, rq);
+
+ q->last_merge = rq;
}
void elv_merge_requests(request_queue_t *q, struct request *rq,
@@ -243,20 +288,13 @@ void elv_merge_requests(request_queue_t *q, struct request *rq,
{
elevator_t *e = q->elevator;
- if (q->last_merge == next)
- q->last_merge = NULL;
-
if (e->ops->elevator_merge_req_fn)
e->ops->elevator_merge_req_fn(q, rq, next);
+
+ q->last_merge = rq;
}
-/*
- * For careful internal use by the block layer. Essentially the same as
- * a requeue in that it tells the io scheduler that this request is not
- * active in the driver or hardware anymore, but we don't want the request
- * added back to the scheduler. Function is not exported.
- */
-void elv_deactivate_request(request_queue_t *q, struct request *rq)
+void elv_requeue_request(request_queue_t *q, struct request *rq)
{
elevator_t *e = q->elevator;
@@ -264,19 +302,14 @@ void elv_deactivate_request(request_queue_t *q, struct request *rq)
* it already went through dequeue, we need to decrement the
* in_flight count again
*/
- if (blk_account_rq(rq))
+ if (blk_account_rq(rq)) {
q->in_flight--;
+ if (blk_sorted_rq(rq) && e->ops->elevator_deactivate_req_fn)
+ e->ops->elevator_deactivate_req_fn(q, rq);
+ }
rq->flags &= ~REQ_STARTED;
- if (e->ops->elevator_deactivate_req_fn)
- e->ops->elevator_deactivate_req_fn(q, rq);
-}
-
-void elv_requeue_request(request_queue_t *q, struct request *rq)
-{
- elv_deactivate_request(q, rq);
-
/*
* if this is the flush, requeue the original instead and drop the flush
*/
@@ -285,31 +318,27 @@ void elv_requeue_request(request_queue_t *q, struct request *rq)
rq = rq->end_io_data;
}
- /*
- * the request is prepped and may have some resources allocated.
- * allowing unprepped requests to pass this one may cause resource
- * deadlock. turn on softbarrier.
- */
- rq->flags |= REQ_SOFTBARRIER;
-
- /*
- * if iosched has an explicit requeue hook, then use that. otherwise
- * just put the request at the front of the queue
- */
- if (q->elevator->ops->elevator_requeue_req_fn)
- q->elevator->ops->elevator_requeue_req_fn(q, rq);
- else
- __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0);
+ __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0);
}
void __elv_add_request(request_queue_t *q, struct request *rq, int where,
int plug)
{
- /*
- * barriers implicitly indicate back insertion
- */
- if (rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER) &&
- where == ELEVATOR_INSERT_SORT)
+ if (rq->flags & (REQ_SOFTBARRIER | REQ_HARDBARRIER)) {
+ /*
+ * barriers implicitly indicate back insertion
+ */
+ if (where == ELEVATOR_INSERT_SORT)
+ where = ELEVATOR_INSERT_BACK;
+
+ /*
+ * this request is scheduling boundary, update end_sector
+ */
+ if (blk_fs_request(rq)) {
+ q->end_sector = rq_end_sector(rq);
+ q->boundary_rq = rq;
+ }
+ } else if (!(rq->flags & REQ_ELVPRIV) && where == ELEVATOR_INSERT_SORT)
where = ELEVATOR_INSERT_BACK;
if (plug)
@@ -317,23 +346,54 @@ void __elv_add_request(request_queue_t *q, struct request *rq, int where,
rq->q = q;
- if (!test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags)) {
- q->elevator->ops->elevator_add_req_fn(q, rq, where);
+ switch (where) {
+ case ELEVATOR_INSERT_FRONT:
+ rq->flags |= REQ_SOFTBARRIER;
- if (blk_queue_plugged(q)) {
- int nrq = q->rq.count[READ] + q->rq.count[WRITE]
- - q->in_flight;
+ list_add(&rq->queuelist, &q->queue_head);
+ break;
- if (nrq >= q->unplug_thresh)
- __generic_unplug_device(q);
- }
- } else
+ case ELEVATOR_INSERT_BACK:
+ rq->flags |= REQ_SOFTBARRIER;
+
+ while (q->elevator->ops->elevator_dispatch_fn(q, 1))
+ ;
+ list_add_tail(&rq->queuelist, &q->queue_head);
/*
- * if drain is set, store the request "locally". when the drain
- * is finished, the requests will be handed ordered to the io
- * scheduler
+ * We kick the queue here for the following reasons.
+ * - The elevator might have returned NULL previously
+ * to delay requests and returned them now. As the
+ * queue wasn't empty before this request, ll_rw_blk
+ * won't run the queue on return, resulting in hang.
+ * - Usually, back inserted requests won't be merged
+ * with anything. There's no point in delaying queue
+ * processing.
*/
- list_add_tail(&rq->queuelist, &q->drain_list);
+ blk_remove_plug(q);
+ q->request_fn(q);
+ break;
+
+ case ELEVATOR_INSERT_SORT:
+ BUG_ON(!blk_fs_request(rq));
+ rq->flags |= REQ_SORTED;
+ q->elevator->ops->elevator_add_req_fn(q, rq);
+ if (q->last_merge == NULL && rq_mergeable(rq))
+ q->last_merge = rq;
+ break;
+
+ default:
+ printk(KERN_ERR "%s: bad insertion point %d\n",
+ __FUNCTION__, where);
+ BUG();
+ }
+
+ if (blk_queue_plugged(q)) {
+ int nrq = q->rq.count[READ] + q->rq.count[WRITE]
+ - q->in_flight;
+
+ if (nrq >= q->unplug_thresh)
+ __generic_unplug_device(q);
+ }
}
void elv_add_request(request_queue_t *q, struct request *rq, int where,
@@ -348,13 +408,19 @@ void elv_add_request(request_queue_t *q, struct request *rq, int where,
static inline struct request *__elv_next_request(request_queue_t *q)
{
- struct request *rq = q->elevator->ops->elevator_next_req_fn(q);
+ struct request *rq;
+
+ if (unlikely(list_empty(&q->queue_head) &&
+ !q->elevator->ops->elevator_dispatch_fn(q, 0)))
+ return NULL;
+
+ rq = list_entry_rq(q->queue_head.next);
/*
* if this is a barrier write and the device has to issue a
* flush sequence to support it, check how far we are
*/
- if (rq && blk_fs_request(rq) && blk_barrier_rq(rq)) {
+ if (blk_fs_request(rq) && blk_barrier_rq(rq)) {
BUG_ON(q->ordered == QUEUE_ORDERED_NONE);
if (q->ordered == QUEUE_ORDERED_FLUSH &&
@@ -371,15 +437,30 @@ struct request *elv_next_request(request_queue_t *q)
int ret;
while ((rq = __elv_next_request(q)) != NULL) {
- /*
- * just mark as started even if we don't start it, a request
- * that has been delayed should not be passed by new incoming
- * requests
- */
- rq->flags |= REQ_STARTED;
+ if (!(rq->flags & REQ_STARTED)) {
+ elevator_t *e = q->elevator;
- if (rq == q->last_merge)
- q->last_merge = NULL;
+ /*
+ * This is the first time the device driver
+ * sees this request (possibly after
+ * requeueing). Notify IO scheduler.
+ */
+ if (blk_sorted_rq(rq) &&
+ e->ops->elevator_activate_req_fn)
+ e->ops->elevator_activate_req_fn(q, rq);
+
+ /*
+ * just mark as started even if we don't start
+ * it, a request that has been delayed should
+ * not be passed by new incoming requests
+ */
+ rq->flags |= REQ_STARTED;
+ }
+
+ if (!q->boundary_rq || q->boundary_rq == rq) {
+ q->end_sector = rq_end_sector(rq);
+ q->boundary_rq = NULL;
+ }
if ((rq->flags & REQ_DONTPREP) || !q->prep_rq_fn)
break;
@@ -391,9 +472,9 @@ struct request *elv_next_request(request_queue_t *q)
/*
* the request may have been (partially) prepped.
* we need to keep this request in the front to
- * avoid resource deadlock. turn on softbarrier.
+ * avoid resource deadlock. REQ_STARTED will
+ * prevent other fs requests from passing this one.
*/
- rq->flags |= REQ_SOFTBARRIER;
rq = NULL;
break;
} else if (ret == BLKPREP_KILL) {
@@ -416,42 +497,32 @@ struct request *elv_next_request(request_queue_t *q)
return rq;
}
-void elv_remove_request(request_queue_t *q, struct request *rq)
+void elv_dequeue_request(request_queue_t *q, struct request *rq)
{
- elevator_t *e = q->elevator;
+ BUG_ON(list_empty(&rq->queuelist));
+
+ list_del_init(&rq->queuelist);
/*
* the time frame between a request being removed from the lists
* and to it is freed is accounted as io that is in progress at
- * the driver side. note that we only account requests that the
- * driver has seen (REQ_STARTED set), to avoid false accounting
- * for request-request merges
+ * the driver side.
*/
if (blk_account_rq(rq))
q->in_flight++;
-
- /*
- * the main clearing point for q->last_merge is on retrieval of
- * request by driver (it calls elv_next_request()), but it _can_
- * also happen here if a request is added to the queue but later
- * deleted without ever being given to driver (merged with another
- * request).
- */
- if (rq == q->last_merge)
- q->last_merge = NULL;
-
- if (e->ops->elevator_remove_req_fn)
- e->ops->elevator_remove_req_fn(q, rq);
}
int elv_queue_empty(request_queue_t *q)
{
elevator_t *e = q->elevator;
+ if (!list_empty(&q->queue_head))
+ return 0;
+
if (e->ops->elevator_queue_empty_fn)
return e->ops->elevator_queue_empty_fn(q);
- return list_empty(&q->queue_head);
+ return 1;
}
struct request *elv_latter_request(request_queue_t *q, struct request *rq)
@@ -487,7 +558,7 @@ struct request *elv_former_request(request_queue_t *q, struct request *rq)
}
int elv_set_request(request_queue_t *q, struct request *rq, struct bio *bio,
- int gfp_mask)
+ gfp_t gfp_mask)
{
elevator_t *e = q->elevator;
@@ -523,11 +594,11 @@ void elv_completed_request(request_queue_t *q, struct request *rq)
/*
* request is released from the driver, io must be done
*/
- if (blk_account_rq(rq))
+ if (blk_account_rq(rq)) {
q->in_flight--;
-
- if (e->ops->elevator_completed_req_fn)
- e->ops->elevator_completed_req_fn(q, rq);
+ if (blk_sorted_rq(rq) && e->ops->elevator_completed_req_fn)
+ e->ops->elevator_completed_req_fn(q, rq);
+ }
}
int elv_register_queue(struct request_queue *q)
@@ -555,10 +626,9 @@ void elv_unregister_queue(struct request_queue *q)
int elv_register(struct elevator_type *e)
{
+ spin_lock_irq(&elv_list_lock);
if (elevator_find(e->elevator_name))
BUG();
-
- spin_lock_irq(&elv_list_lock);
list_add_tail(&e->list, &elv_list);
spin_unlock_irq(&elv_list_lock);
@@ -582,25 +652,36 @@ EXPORT_SYMBOL_GPL(elv_unregister);
* switch to new_e io scheduler. be careful not to introduce deadlocks -
* we don't free the old io scheduler, before we have allocated what we
* need for the new one. this way we have a chance of going back to the old
- * one, if the new one fails init for some reason. we also do an intermediate
- * switch to noop to ensure safety with stack-allocated requests, since they
- * don't originate from the block layer allocator. noop is safe here, because
- * it never needs to touch the elevator itself for completion events. DRAIN
- * flags will make sure we don't touch it for additions either.
+ * one, if the new one fails init for some reason.
*/
static void elevator_switch(request_queue_t *q, struct elevator_type *new_e)
{
- elevator_t *e = kmalloc(sizeof(elevator_t), GFP_KERNEL);
- struct elevator_type *noop_elevator = NULL;
- elevator_t *old_elevator;
+ elevator_t *old_elevator, *e;
+ /*
+ * Allocate new elevator
+ */
+ e = kmalloc(sizeof(elevator_t), GFP_KERNEL);
if (!e)
goto error;
/*
- * first step, drain requests from the block freelist
+ * Turn on BYPASS and drain all requests w/ elevator private data
*/
- blk_wait_queue_drained(q, 0);
+ spin_lock_irq(q->queue_lock);
+
+ set_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags);
+
+ while (q->elevator->ops->elevator_dispatch_fn(q, 1))
+ ;
+
+ while (q->rq.elvpriv) {
+ spin_unlock_irq(q->queue_lock);
+ msleep(10);
+ spin_lock_irq(q->queue_lock);
+ }
+
+ spin_unlock_irq(q->queue_lock);
/*
* unregister old elevator data
@@ -608,18 +689,6 @@ static void elevator_switch(request_queue_t *q, struct elevator_type *new_e)
elv_unregister_queue(q);
old_elevator = q->elevator;
- /*
- * next step, switch to noop since it uses no private rq structures
- * and doesn't allocate any memory for anything. then wait for any
- * non-fs requests in-flight
- */
- noop_elevator = elevator_get("noop");
- spin_lock_irq(q->queue_lock);
- elevator_attach(q, noop_elevator, e);
- spin_unlock_irq(q->queue_lock);
-
- blk_wait_queue_drained(q, 1);
-
/*
* attach and start new elevator
*/
@@ -630,11 +699,10 @@ static void elevator_switch(request_queue_t *q, struct elevator_type *new_e)
goto fail_register;
/*
- * finally exit old elevator and start queue again
+ * finally exit old elevator and turn off BYPASS.
*/
elevator_exit(old_elevator);
- blk_finish_queue_drain(q);
- elevator_put(noop_elevator);
+ clear_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags);
return;
fail_register:
@@ -643,13 +711,13 @@ fail_register:
* one again (along with re-adding the sysfs dir)
*/
elevator_exit(e);
+ e = NULL;
fail:
q->elevator = old_elevator;
elv_register_queue(q);
- blk_finish_queue_drain(q);
+ clear_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags);
+ kfree(e);
error:
- if (noop_elevator)
- elevator_put(noop_elevator);
elevator_put(new_e);
printk(KERN_ERR "elevator: switch to %s failed\n",new_e->elevator_name);
}
@@ -701,11 +769,12 @@ ssize_t elv_iosched_show(request_queue_t *q, char *name)
return len;
}
+EXPORT_SYMBOL(elv_dispatch_sort);
EXPORT_SYMBOL(elv_add_request);
EXPORT_SYMBOL(__elv_add_request);
EXPORT_SYMBOL(elv_requeue_request);
EXPORT_SYMBOL(elv_next_request);
-EXPORT_SYMBOL(elv_remove_request);
+EXPORT_SYMBOL(elv_dequeue_request);
EXPORT_SYMBOL(elv_queue_empty);
EXPORT_SYMBOL(elv_completed_request);
EXPORT_SYMBOL(elevator_exit);
diff --git a/drivers/block/genhd.c b/drivers/block/genhd.c
index d42840cc0d1d..486ce1fdeb8c 100644
--- a/drivers/block/genhd.c
+++ b/drivers/block/genhd.c
@@ -337,10 +337,30 @@ static ssize_t disk_attr_show(struct kobject *kobj, struct attribute *attr,
return ret;
}
+static ssize_t disk_attr_store(struct kobject * kobj, struct attribute * attr,
+ const char *page, size_t count)
+{
+ struct gendisk *disk = to_disk(kobj);
+ struct disk_attribute *disk_attr =
+ container_of(attr,struct disk_attribute,attr);
+ ssize_t ret = 0;
+
+ if (disk_attr->store)
+ ret = disk_attr->store(disk, page, count);
+ return ret;
+}
+
static struct sysfs_ops disk_sysfs_ops = {
.show = &disk_attr_show,
+ .store = &disk_attr_store,
};
+static ssize_t disk_uevent_store(struct gendisk * disk,
+ const char *buf, size_t count)
+{
+ kobject_hotplug(&disk->kobj, KOBJ_ADD);
+ return count;
+}
static ssize_t disk_dev_read(struct gendisk * disk, char *page)
{
dev_t base = MKDEV(disk->major, disk->first_minor);
@@ -382,6 +402,10 @@ static ssize_t disk_stats_read(struct gendisk * disk, char *page)
jiffies_to_msecs(disk_stat_read(disk, io_ticks)),
jiffies_to_msecs(disk_stat_read(disk, time_in_queue)));
}
+static struct disk_attribute disk_attr_uevent = {
+ .attr = {.name = "uevent", .mode = S_IWUSR },
+ .store = disk_uevent_store
+};
static struct disk_attribute disk_attr_dev = {
.attr = {.name = "dev", .mode = S_IRUGO },
.show = disk_dev_read
@@ -404,6 +428,7 @@ static struct disk_attribute disk_attr_stat = {
};
static struct attribute * default_attrs[] = {
+ &disk_attr_uevent.attr,
&disk_attr_dev.attr,
&disk_attr_range.attr,
&disk_attr_removable.attr,
diff --git a/drivers/block/ll_rw_blk.c b/drivers/block/ll_rw_blk.c
index baedac522945..0af73512b9a8 100644
--- a/drivers/block/ll_rw_blk.c
+++ b/drivers/block/ll_rw_blk.c
@@ -263,8 +263,6 @@ void blk_queue_make_request(request_queue_t * q, make_request_fn * mfn)
blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
blk_queue_activity_fn(q, NULL, NULL);
-
- INIT_LIST_HEAD(&q->drain_list);
}
EXPORT_SYMBOL(blk_queue_make_request);
@@ -353,6 +351,8 @@ static void blk_pre_flush_end_io(struct request *flush_rq)
struct request *rq = flush_rq->end_io_data;
request_queue_t *q = rq->q;
+ elv_completed_request(q, flush_rq);
+
rq->flags |= REQ_BAR_PREFLUSH;
if (!flush_rq->errors)
@@ -369,6 +369,8 @@ static void blk_post_flush_end_io(struct request *flush_rq)
struct request *rq = flush_rq->end_io_data;
request_queue_t *q = rq->q;
+ elv_completed_request(q, flush_rq);
+
rq->flags |= REQ_BAR_POSTFLUSH;
q->end_flush_fn(q, flush_rq);
@@ -408,8 +410,6 @@ struct request *blk_start_pre_flush(request_queue_t *q, struct request *rq)
if (!list_empty(&rq->queuelist))
blkdev_dequeue_request(rq);
- elv_deactivate_request(q, rq);
-
flush_rq->end_io_data = rq;
flush_rq->end_io = blk_pre_flush_end_io;
@@ -1040,6 +1040,7 @@ EXPORT_SYMBOL(blk_queue_invalidate_tags);
static char *rq_flags[] = {
"REQ_RW",
"REQ_FAILFAST",
+ "REQ_SORTED",
"REQ_SOFTBARRIER",
"REQ_HARDBARRIER",
"REQ_CMD",
@@ -1047,6 +1048,7 @@ static char *rq_flags[] = {
"REQ_STARTED",
"REQ_DONTPREP",
"REQ_QUEUED",
+ "REQ_ELVPRIV",
"REQ_PC",
"REQ_BLOCK_PC",
"REQ_SENSE",
@@ -1637,9 +1639,9 @@ static int blk_init_free_list(request_queue_t *q)
rl->count[READ] = rl->count[WRITE] = 0;
rl->starved[READ] = rl->starved[WRITE] = 0;
+ rl->elvpriv = 0;
init_waitqueue_head(&rl->wait[READ]);
init_waitqueue_head(&rl->wait[WRITE]);
- init_waitqueue_head(&rl->drain);
rl->rq_pool = mempool_create_node(BLKDEV_MIN_RQ, mempool_alloc_slab,
mempool_free_slab, request_cachep, q->node);
@@ -1652,13 +1654,13 @@ static int blk_init_free_list(request_queue_t *q)
static int __make_request(request_queue_t *, struct bio *);
-request_queue_t *blk_alloc_queue(int gfp_mask)
+request_queue_t *blk_alloc_queue(gfp_t gfp_mask)
{
return blk_alloc_queue_node(gfp_mask, -1);
}
EXPORT_SYMBOL(blk_alloc_queue);
-request_queue_t *blk_alloc_queue_node(int gfp_mask, int node_id)
+request_queue_t *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)
{
request_queue_t *q;
@@ -1782,12 +1784,14 @@ EXPORT_SYMBOL(blk_get_queue);
static inline void blk_free_request(request_queue_t *q, struct request *rq)
{
- elv_put_request(q, rq);
+ if (rq->flags & REQ_ELVPRIV)
+ elv_put_request(q, rq);
mempool_free(rq, q->rq.rq_pool);
}
static inline struct request *
-blk_alloc_request(request_queue_t *q, int rw, struct bio *bio, int gfp_mask)
+blk_alloc_request(request_queue_t *q, int rw, struct bio *bio,
+ int priv, gfp_t gfp_mask)
{
struct request *rq = mempool_alloc(q->rq.rq_pool, gfp_mask);
@@ -1800,11 +1804,15 @@ blk_alloc_request(request_queue_t *q, int rw, struct bio *bio, int gfp_mask)
*/
rq->flags = rw;
- if (!elv_set_request(q, rq, bio, gfp_mask))
- return rq;
+ if (priv) {
+ if (unlikely(elv_set_request(q, rq, bio, gfp_mask))) {
+ mempool_free(rq, q->rq.rq_pool);
+ return NULL;
+ }
+ rq->flags |= REQ_ELVPRIV;
+ }
- mempool_free(rq, q->rq.rq_pool);
- return NULL;
+ return rq;
}
/*
@@ -1860,22 +1868,18 @@ static void __freed_request(request_queue_t *q, int rw)
* A request has just been released. Account for it, update the full and
* congestion status, wake up any waiters. Called under q->queue_lock.
*/
-static void freed_request(request_queue_t *q, int rw)
+static void freed_request(request_queue_t *q, int rw, int priv)
{
struct request_list *rl = &q->rq;
rl->count[rw]--;
+ if (priv)
+ rl->elvpriv--;
__freed_request(q, rw);
if (unlikely(rl->starved[rw ^ 1]))
__freed_request(q, rw ^ 1);
-
- if (!rl->count[READ] && !rl->count[WRITE]) {
- smp_mb();
- if (unlikely(waitqueue_active(&rl->drain)))
- wake_up(&rl->drain);
- }
}
#define blkdev_free_rq(list) list_entry((list)->next, struct request, queuelist)
@@ -1885,14 +1889,12 @@ static void freed_request(request_queue_t *q, int rw)
* Returns !NULL on success, with queue_lock *not held*.
*/
static struct request *get_request(request_queue_t *q, int rw, struct bio *bio,
- int gfp_mask)
+ gfp_t gfp_mask)
{
struct request *rq = NULL;
struct request_list *rl = &q->rq;
struct io_context *ioc = current_io_context(GFP_ATOMIC);
-
- if (unlikely(test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags)))
- goto out;
+ int priv;
if (rl->count[rw]+1 >= q->nr_requests) {
/*
@@ -1937,9 +1939,14 @@ get_rq:
rl->starved[rw] = 0;
if (rl->count[rw] >= queue_congestion_on_threshold(q))
set_queue_congested(q, rw);
+
+ priv = !test_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags);
+ if (priv)
+ rl->elvpriv++;
+
spin_unlock_irq(q->queue_lock);
- rq = blk_alloc_request(q, rw, bio, gfp_mask);
+ rq = blk_alloc_request(q, rw, bio, priv, gfp_mask);
if (!rq) {
/*
* Allocation failed presumably due to memory. Undo anything
@@ -1949,7 +1956,7 @@ get_rq:
* wait queue, but this is pretty rare.
*/
spin_lock_irq(q->queue_lock);
- freed_request(q, rw);
+ freed_request(q, rw, priv);
/*
* in the very unlikely event that allocation failed and no
@@ -2019,7 +2026,7 @@ static struct request *get_request_wait(request_queue_t *q, int rw,
return rq;
}
-struct request *blk_get_request(request_queue_t *q, int rw, int gfp_mask)
+struct request *blk_get_request(request_queue_t *q, int rw, gfp_t gfp_mask)
{
struct request *rq;
@@ -2251,7 +2258,7 @@ EXPORT_SYMBOL(blk_rq_unmap_user);
* @gfp_mask: memory allocation flags
*/
int blk_rq_map_kern(request_queue_t *q, struct request *rq, void *kbuf,
- unsigned int len, unsigned int gfp_mask)
+ unsigned int len, gfp_t gfp_mask)
{
struct bio *bio;
@@ -2433,13 +2440,15 @@ void disk_round_stats(struct gendisk *disk)
{
unsigned long now = jiffies;
- __disk_stat_add(disk, time_in_queue,
- disk->in_flight * (now - disk->stamp));
- disk->stamp = now;
+ if (now == disk->stamp)
+ return;
- if (disk->in_flight)
- __disk_stat_add(disk, io_ticks, (now - disk->stamp_idle));
- disk->stamp_idle = now;
+ if (disk->in_flight) {
+ __disk_stat_add(disk, time_in_queue,
+ disk->in_flight * (now - disk->stamp));
+ __disk_stat_add(disk, io_ticks, (now - disk->stamp));
+ }
+ disk->stamp = now;
}
/*
@@ -2454,6 +2463,8 @@ static void __blk_put_request(request_queue_t *q, struct request *req)
if (unlikely(--req->ref_count))
return;
+ elv_completed_request(q, req);
+
req->rq_status = RQ_INACTIVE;
req->rl = NULL;
@@ -2463,26 +2474,25 @@ static void __blk_put_request(request_queue_t *q, struct request *req)
*/
if (rl) {
int rw = rq_data_dir(req);
-
- elv_completed_request(q, req);
+ int priv = req->flags & REQ_ELVPRIV;
BUG_ON(!list_empty(&req->queuelist));
blk_free_request(q, req);
- freed_request(q, rw);
+ freed_request(q, rw, priv);
}
}
void blk_put_request(struct request *req)
{
- /*
- * if req->rl isn't set, this request didnt originate from the
- * block layer, so it's safe to just disregard it
- */
- if (req->rl) {
- unsigned long flags;
- request_queue_t *q = req->q;
+ unsigned long flags;
+ request_queue_t *q = req->q;
+ /*
+ * Gee, IDE calls in w/ NULL q. Fix IDE and remove the
+ * following if (q) test.
+ */
+ if (q) {
spin_lock_irqsave(q->queue_lock, flags);
__blk_put_request(q, req);
spin_unlock_irqrestore(q->queue_lock, flags);
@@ -2797,97 +2807,6 @@ static inline void blk_partition_remap(struct bio *bio)
}
}
-void blk_finish_queue_drain(request_queue_t *q)
-{
- struct request_list *rl = &q->rq;
- struct request *rq;
- int requeued = 0;
-
- spin_lock_irq(q->queue_lock);
- clear_bit(QUEUE_FLAG_DRAIN, &q->queue_flags);
-
- while (!list_empty(&q->drain_list)) {
- rq = list_entry_rq(q->drain_list.next);
-
- list_del_init(&rq->queuelist);
- elv_requeue_request(q, rq);
- requeued++;
- }
-
- if (requeued)
- q->request_fn(q);
-
- spin_unlock_irq(q->queue_lock);
-
- wake_up(&rl->wait[0]);
- wake_up(&rl->wait[1]);
- wake_up(&rl->drain);
-}
-
-static int wait_drain(request_queue_t *q, struct request_list *rl, int dispatch)
-{
- int wait = rl->count[READ] + rl->count[WRITE];
-
- if (dispatch)
- wait += !list_empty(&q->queue_head);
-
- return wait;
-}
-
-/*
- * We rely on the fact that only requests allocated through blk_alloc_request()
- * have io scheduler private data structures associated with them. Any other
- * type of request (allocated on stack or through kmalloc()) should not go
- * to the io scheduler core, but be attached to the queue head instead.
- */
-void blk_wait_queue_drained(request_queue_t *q, int wait_dispatch)
-{
- struct request_list *rl = &q->rq;
- DEFINE_WAIT(wait);
-
- spin_lock_irq(q->queue_lock);
- set_bit(QUEUE_FLAG_DRAIN, &q->queue_flags);
-
- while (wait_drain(q, rl, wait_dispatch)) {
- prepare_to_wait(&rl->drain, &wait, TASK_UNINTERRUPTIBLE);
-
- if (wait_drain(q, rl, wait_dispatch)) {
- __generic_unplug_device(q);
- spin_unlock_irq(q->queue_lock);
- io_schedule();
- spin_lock_irq(q->queue_lock);
- }
-
- finish_wait(&rl->drain, &wait);
- }
-
- spin_unlock_irq(q->queue_lock);
-}
-
-/*
- * block waiting for the io scheduler being started again.
- */
-static inline void block_wait_queue_running(request_queue_t *q)
-{
- DEFINE_WAIT(wait);
-
- while (unlikely(test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags))) {
- struct request_list *rl = &q->rq;
-
- prepare_to_wait_exclusive(&rl->drain, &wait,
- TASK_UNINTERRUPTIBLE);
-
- /*
- * re-check the condition. avoids using prepare_to_wait()
- * in the fast path (queue is running)
- */
- if (test_bit(QUEUE_FLAG_DRAIN, &q->queue_flags))
- io_schedule();
-
- finish_wait(&rl->drain, &wait);
- }
-}
-
static void handle_bad_sector(struct bio *bio)
{
char b[BDEVNAME_SIZE];
@@ -2983,8 +2902,6 @@ end_io:
if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags)))
goto end_io;
- block_wait_queue_running(q);
-
/*
* If this device has partitions, remap block n
* of partition p to block n+start(p) of the disk.
@@ -3393,7 +3310,7 @@ void exit_io_context(void)
* but since the current task itself holds a reference, the context can be
* used in general code, so long as it stays within `current` context.
*/
-struct io_context *current_io_context(int gfp_flags)
+struct io_context *current_io_context(gfp_t gfp_flags)
{
struct task_struct *tsk = current;
struct io_context *ret;
@@ -3424,7 +3341,7 @@ EXPORT_SYMBOL(current_io_context);
*
* This is always called in the context of the task which submitted the I/O.
*/
-struct io_context *get_io_context(int gfp_flags)
+struct io_context *get_io_context(gfp_t gfp_flags)
{
struct io_context *ret;
ret = current_io_context(gfp_flags);
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index b35e08876dd4..96c664af8d06 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -881,7 +881,7 @@ loop_init_xfer(struct loop_device *lo, struct loop_func_table *xfer,
static int loop_clr_fd(struct loop_device *lo, struct block_device *bdev)
{
struct file *filp = lo->lo_backing_file;
- int gfp = lo->old_gfp_mask;
+ gfp_t gfp = lo->old_gfp_mask;
if (lo->lo_state != Lo_bound)
return -ENXIO;
diff --git a/drivers/block/noop-iosched.c b/drivers/block/noop-iosched.c
index b1730b62c37e..f56b8edb06e4 100644
--- a/drivers/block/noop-iosched.c
+++ b/drivers/block/noop-iosched.c
@@ -7,57 +7,19 @@
#include
#include
-/*
- * See if we can find a request that this buffer can be coalesced with.
- */
-static int elevator_noop_merge(request_queue_t *q, struct request **req,
- struct bio *bio)
+static void elevator_noop_add_request(request_queue_t *q, struct request *rq)
{
- int ret;
-
- ret = elv_try_last_merge(q, bio);
- if (ret != ELEVATOR_NO_MERGE)
- *req = q->last_merge;
-
- return ret;
+ elv_dispatch_add_tail(q, rq);
}
-static void elevator_noop_merge_requests(request_queue_t *q, struct request *req,
- struct request *next)
+static int elevator_noop_dispatch(request_queue_t *q, int force)
{
- list_del_init(&next->queuelist);
-}
-
-static void elevator_noop_add_request(request_queue_t *q, struct request *rq,
- int where)
-{
- if (where == ELEVATOR_INSERT_FRONT)
- list_add(&rq->queuelist, &q->queue_head);
- else
- list_add_tail(&rq->queuelist, &q->queue_head);
-
- /*
- * new merges must not precede this barrier
- */
- if (rq->flags & REQ_HARDBARRIER)
- q->last_merge = NULL;
- else if (!q->last_merge)
- q->last_merge = rq;
-}
-
-static struct request *elevator_noop_next_request(request_queue_t *q)
-{
- if (!list_empty(&q->queue_head))
- return list_entry_rq(q->queue_head.next);
-
- return NULL;
+ return 0;
}
static struct elevator_type elevator_noop = {
.ops = {
- .elevator_merge_fn = elevator_noop_merge,
- .elevator_merge_req_fn = elevator_noop_merge_requests,
- .elevator_next_req_fn = elevator_noop_next_request,
+ .elevator_dispatch_fn = elevator_noop_dispatch,
.elevator_add_req_fn = elevator_noop_add_request,
},
.elevator_name = "noop",
diff --git a/drivers/block/paride/pg.c b/drivers/block/paride/pg.c
index b3982395f22b..82f2d6d2eeef 100644
--- a/drivers/block/paride/pg.c
+++ b/drivers/block/paride/pg.c
@@ -674,7 +674,7 @@ static int __init pg_init(void)
for (unit = 0; unit < PG_UNITS; unit++) {
struct pg *dev = &devices[unit];
if (dev->present) {
- class_device_create(pg_class, MKDEV(major, unit),
+ class_device_create(pg_class, NULL, MKDEV(major, unit),
NULL, "pg%u", unit);
err = devfs_mk_cdev(MKDEV(major, unit),
S_IFCHR | S_IRUSR | S_IWUSR, "pg/%u",
diff --git a/drivers/block/paride/pt.c b/drivers/block/paride/pt.c
index d8d35233cf49..686c95573452 100644
--- a/drivers/block/paride/pt.c
+++ b/drivers/block/paride/pt.c
@@ -971,7 +971,7 @@ static int __init pt_init(void)
devfs_mk_dir("pt");
for (unit = 0; unit < PT_UNITS; unit++)
if (pt[unit].present) {
- class_device_create(pt_class, MKDEV(major, unit),
+ class_device_create(pt_class, NULL, MKDEV(major, unit),
NULL, "pt%d", unit);
err = devfs_mk_cdev(MKDEV(major, unit),
S_IFCHR | S_IRUSR | S_IWUSR,
@@ -980,7 +980,7 @@ static int __init pt_init(void)
class_device_destroy(pt_class, MKDEV(major, unit));
goto out_class;
}
- class_device_create(pt_class, MKDEV(major, unit + 128),
+ class_device_create(pt_class, NULL, MKDEV(major, unit + 128),
NULL, "pt%dn", unit);
err = devfs_mk_cdev(MKDEV(major, unit + 128),
S_IFCHR | S_IRUSR | S_IWUSR,
diff --git a/drivers/block/rd.c b/drivers/block/rd.c
index 145c1fbffe01..68c60a5bcdab 100644
--- a/drivers/block/rd.c
+++ b/drivers/block/rd.c
@@ -348,7 +348,7 @@ static int rd_open(struct inode *inode, struct file *filp)
struct block_device *bdev = inode->i_bdev;
struct address_space *mapping;
unsigned bsize;
- int gfp_mask;
+ gfp_t gfp_mask;
inode = igrab(bdev->bd_inode);
rd_bdev[unit] = bdev;
diff --git a/drivers/block/sx8.c b/drivers/block/sx8.c
index d57007b92f77..1ded3b433459 100644
--- a/drivers/block/sx8.c
+++ b/drivers/block/sx8.c
@@ -1,7 +1,7 @@
/*
* sx8.c: Driver for Promise SATA SX8 looks-like-I2O hardware
*
- * Copyright 2004 Red Hat, Inc.
+ * Copyright 2004-2005 Red Hat, Inc.
*
* Author/maintainer: Jeff Garzik
*
@@ -31,10 +31,6 @@
#include
#include
-MODULE_AUTHOR("Jeff Garzik");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("Promise SATA SX8 block driver");
-
#if 0
#define CARM_DEBUG
#define CARM_VERBOSE_DEBUG
@@ -45,9 +41,35 @@ MODULE_DESCRIPTION("Promise SATA SX8 block driver");
#undef CARM_NDEBUG
#define DRV_NAME "sx8"
-#define DRV_VERSION "0.8"
+#define DRV_VERSION "1.0"
#define PFX DRV_NAME ": "
+MODULE_AUTHOR("Jeff Garzik");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Promise SATA SX8 block driver");
+MODULE_VERSION(DRV_VERSION);
+
+/*
+ * SX8 hardware has a single message queue for all ATA ports.
+ * When this driver was written, the hardware (firmware?) would
+ * corrupt data eventually, if more than one request was outstanding.
+ * As one can imagine, having 8 ports bottlenecking on a single
+ * command hurts performance.
+ *
+ * Based on user reports, later versions of the hardware (firmware?)
+ * seem to be able to survive with more than one command queued.
+ *
+ * Therefore, we default to the safe option -- 1 command -- but
+ * allow the user to increase this.
+ *
+ * SX8 should be able to support up to ~60 queued commands (CARM_MAX_REQ),
+ * but problems seem to occur when you exceed ~30, even on newer hardware.
+ */
+static int max_queue = 1;
+module_param(max_queue, int, 0444);
+MODULE_PARM_DESC(max_queue, "Maximum number of queued commands. (min==1, max==30, safe==1)");
+
+
#define NEXT_RESP(idx) ((idx + 1) % RMSG_Q_LEN)
/* 0xf is just arbitrary, non-zero noise; this is sorta like poisoning */
@@ -90,12 +112,10 @@ enum {
/* command message queue limits */
CARM_MAX_REQ = 64, /* max command msgs per host */
- CARM_MAX_Q = 1, /* one command at a time */
CARM_MSG_LOW_WATER = (CARM_MAX_REQ / 4), /* refill mark */
/* S/G limits, host-wide and per-request */
CARM_MAX_REQ_SG = 32, /* max s/g entries per request */
- CARM_SG_BOUNDARY = 0xffffUL, /* s/g segment boundary */
CARM_MAX_HOST_SG = 600, /* max s/g entries per host */
CARM_SG_LOW_WATER = (CARM_MAX_HOST_SG / 4), /* re-fill mark */
@@ -181,6 +201,10 @@ enum {
FL_DYN_MAJOR = (1 << 17),
};
+enum {
+ CARM_SG_BOUNDARY = 0xffffUL, /* s/g segment boundary */
+};
+
enum scatter_gather_types {
SGT_32BIT = 0,
SGT_64BIT = 1,
@@ -218,7 +242,6 @@ static const char *state_name[] = {
struct carm_port {
unsigned int port_no;
- unsigned int n_queued;
struct gendisk *disk;
struct carm_host *host;
@@ -448,7 +471,7 @@ static inline int carm_lookup_bucket(u32 msg_size)
for (i = 0; i < ARRAY_SIZE(msg_sizes); i++)
if (msg_size <= msg_sizes[i])
return i;
-
+
return -ENOENT;
}
@@ -509,7 +532,7 @@ static struct carm_request *carm_get_request(struct carm_host *host)
if (host->hw_sg_used >= (CARM_MAX_HOST_SG - CARM_MAX_REQ_SG))
return NULL;
- for (i = 0; i < CARM_MAX_Q; i++)
+ for (i = 0; i < max_queue; i++)
if ((host->msg_alloc & (1ULL << i)) == 0) {
struct carm_request *crq = &host->req[i];
crq->port = NULL;
@@ -521,14 +544,14 @@ static struct carm_request *carm_get_request(struct carm_host *host)
assert(host->n_msgs <= CARM_MAX_REQ);
return crq;
}
-
+
DPRINTK("no request available, returning NULL\n");
return NULL;
}
static int carm_put_request(struct carm_host *host, struct carm_request *crq)
{
- assert(crq->tag < CARM_MAX_Q);
+ assert(crq->tag < max_queue);
if (unlikely((host->msg_alloc & (1ULL << crq->tag)) == 0))
return -EINVAL; /* tried to clear a tag that was not active */
@@ -791,7 +814,7 @@ static inline void carm_end_rq(struct carm_host *host, struct carm_request *crq,
int is_ok)
{
carm_end_request_queued(host, crq, is_ok);
- if (CARM_MAX_Q == 1)
+ if (max_queue == 1)
carm_round_robin(host);
else if ((host->n_msgs <= CARM_MSG_LOW_WATER) &&
(host->hw_sg_used <= CARM_SG_LOW_WATER)) {
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 543f93e0f23f..b9fbe6e7f9ae 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -55,14 +55,6 @@ config BT_HCIUART_BCSP
Say Y here to compile support for HCI BCSP protocol.
-config BT_HCIUART_BCSP_TXCRC
- bool "Transmit CRC with every BCSP packet"
- depends on BT_HCIUART_BCSP
- help
- If you say Y here, a 16-bit CRC checksum will be transmitted along with
- every BCSP (BlueCore Serial Protocol) packet sent to the Bluetooth chip.
- This increases reliability, but slightly reduces efficiency.
-
config BT_HCIBCM203X
tristate "HCI BCM203x USB driver"
depends on USB
diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c
index 4fa85234d8b5..0db0400519c9 100644
--- a/drivers/bluetooth/bpa10x.c
+++ b/drivers/bluetooth/bpa10x.c
@@ -550,6 +550,9 @@ static int bpa10x_probe(struct usb_interface *intf, const struct usb_device_id *
if (ignore)
return -ENODEV;
+ if (intf->cur_altsetting->desc.bInterfaceNumber > 0)
+ return -ENODEV;
+
data = kmalloc(sizeof(*data), GFP_KERNEL);
if (!data) {
BT_ERR("Can't allocate data structure");
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
index 0ee324e1265d..0a4761415ac3 100644
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -1,35 +1,27 @@
-/*
- BlueCore Serial Protocol (BCSP) for Linux Bluetooth stack (BlueZ).
- Copyright 2002 by Fabrizio Gennari
-
- Based on
- hci_h4.c by Maxim Krasnyansky
- ABCSP by Carl Orsborn
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
/*
- * $Id: hci_bcsp.c,v 1.2 2002/09/26 05:05:14 maxk Exp $
+ *
+ * Bluetooth HCI UART driver
+ *
+ * Copyright (C) 2002-2003 Fabrizio Gennari
+ * Copyright (C) 2004-2005 Marcel Holtmann
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
*/
-#define VERSION "0.2"
-
#include
#include
@@ -52,16 +44,56 @@
#include
#include
+
#include "hci_uart.h"
-#include "hci_bcsp.h"
#ifndef CONFIG_BT_HCIUART_DEBUG
#undef BT_DBG
#define BT_DBG( A... )
#endif
+#define VERSION "0.3"
+
+static int txcrc = 1;
static int hciextn = 1;
+#define BCSP_TXWINSIZE 4
+
+#define BCSP_ACK_PKT 0x05
+#define BCSP_LE_PKT 0x06
+
+struct bcsp_struct {
+ struct sk_buff_head unack; /* Unack'ed packets queue */
+ struct sk_buff_head rel; /* Reliable packets queue */
+ struct sk_buff_head unrel; /* Unreliable packets queue */
+
+ unsigned long rx_count;
+ struct sk_buff *rx_skb;
+ u8 rxseq_txack; /* rxseq == txack. */
+ u8 rxack; /* Last packet sent by us that the peer ack'ed */
+ struct timer_list tbcsp;
+
+ enum {
+ BCSP_W4_PKT_DELIMITER,
+ BCSP_W4_PKT_START,
+ BCSP_W4_BCSP_HDR,
+ BCSP_W4_DATA,
+ BCSP_W4_CRC
+ } rx_state;
+
+ enum {
+ BCSP_ESCSTATE_NOESC,
+ BCSP_ESCSTATE_ESC
+ } rx_esc_state;
+
+ u8 use_crc;
+ u16 message_crc;
+ u8 txack_req; /* Do we need to send ack's to the peer? */
+
+ /* Reliable packet sequence number - used to assign seq to each rel pkt. */
+ u8 msgq_txseq;
+};
+
/* ---- BCSP CRC calculation ---- */
/* Table for calculating CRC for polynomial 0x1021, LSB processed first,
@@ -111,6 +143,7 @@ static u16 bcsp_crc_reverse(u16 crc)
rev |= (crc & 1);
crc = crc >> 1;
}
+
return (rev);
}
@@ -119,6 +152,7 @@ static u16 bcsp_crc_reverse(u16 crc)
static void bcsp_slip_msgdelim(struct sk_buff *skb)
{
const char pkt_delim = 0xc0;
+
memcpy(skb_put(skb, 1), &pkt_delim, 1);
}
@@ -173,11 +207,8 @@ static struct sk_buff *bcsp_prepare_pkt(struct bcsp_struct *bcsp, u8 *data,
{
struct sk_buff *nskb;
u8 hdr[4], chan;
- int rel, i;
-
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
u16 BCSP_CRC_INIT(bcsp_txmsg_crc);
-#endif
+ int rel, i;
switch (pkt_type) {
case HCI_ACLDATA_PKT:
@@ -240,9 +271,9 @@ static struct sk_buff *bcsp_prepare_pkt(struct bcsp_struct *bcsp, u8 *data,
BT_DBG("Sending packet with seqno %u", bcsp->msgq_txseq);
bcsp->msgq_txseq = ++(bcsp->msgq_txseq) & 0x07;
}
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
- hdr[0] |= 0x40;
-#endif
+
+ if (bcsp->use_crc)
+ hdr[0] |= 0x40;
hdr[1] = ((len << 4) & 0xff) | chan;
hdr[2] = len >> 4;
@@ -251,25 +282,25 @@ static struct sk_buff *bcsp_prepare_pkt(struct bcsp_struct *bcsp, u8 *data,
/* Put BCSP header */
for (i = 0; i < 4; i++) {
bcsp_slip_one_byte(nskb, hdr[i]);
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
- bcsp_crc_update(&bcsp_txmsg_crc, hdr[i]);
-#endif
+
+ if (bcsp->use_crc)
+ bcsp_crc_update(&bcsp_txmsg_crc, hdr[i]);
}
/* Put payload */
for (i = 0; i < len; i++) {
bcsp_slip_one_byte(nskb, data[i]);
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
- bcsp_crc_update(&bcsp_txmsg_crc, data[i]);
-#endif
+
+ if (bcsp->use_crc)
+ bcsp_crc_update(&bcsp_txmsg_crc, data[i]);
}
-#ifdef CONFIG_BT_HCIUART_BCSP_TXCRC
/* Put CRC */
- bcsp_txmsg_crc = bcsp_crc_reverse(bcsp_txmsg_crc);
- bcsp_slip_one_byte(nskb, (u8) ((bcsp_txmsg_crc >> 8) & 0x00ff));
- bcsp_slip_one_byte(nskb, (u8) (bcsp_txmsg_crc & 0x00ff));
-#endif
+ if (bcsp->use_crc) {
+ bcsp_txmsg_crc = bcsp_crc_reverse(bcsp_txmsg_crc);
+ bcsp_slip_one_byte(nskb, (u8) ((bcsp_txmsg_crc >> 8) & 0x00ff));
+ bcsp_slip_one_byte(nskb, (u8) (bcsp_txmsg_crc & 0x00ff));
+ }
bcsp_slip_msgdelim(nskb);
return nskb;
@@ -317,7 +348,6 @@ static struct sk_buff *bcsp_dequeue(struct hci_uart *hu)
spin_unlock_irqrestore(&bcsp->unack.lock, flags);
-
/* We could not send a reliable packet, either because there are
none or because there are too many unack'ed pkts. Did we receive
any packets we have not acknowledged yet ? */
@@ -363,7 +393,7 @@ static void bcsp_pkt_cull(struct bcsp_struct *bcsp)
BT_ERR("Peer acked invalid packet");
BT_DBG("Removing %u pkts out of %u, up to seqno %u",
- pkts_to_be_removed, bcsp->unack.qlen, (seqno - 1) & 0x07);
+ pkts_to_be_removed, bcsp->unack.qlen, (seqno - 1) & 0x07);
for (i = 0, skb = ((struct sk_buff *) &bcsp->unack)->next; i < pkts_to_be_removed
&& skb != (struct sk_buff *) &bcsp->unack; i++) {
@@ -374,8 +404,10 @@ static void bcsp_pkt_cull(struct bcsp_struct *bcsp)
kfree_skb(skb);
skb = nskb;
}
+
if (bcsp->unack.qlen == 0)
del_timer(&bcsp->tbcsp);
+
spin_unlock_irqrestore(&bcsp->unack.lock, flags);
if (i != pkts_to_be_removed)
@@ -530,6 +562,7 @@ static inline void bcsp_complete_rx_pkt(struct hci_uart *hu)
hci_recv_frame(bcsp->rx_skb);
}
+
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
bcsp->rx_skb = NULL;
}
@@ -598,8 +631,8 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
BT_ERR ("Checksum failed: computed %04x received %04x",
bcsp_crc_reverse(bcsp->message_crc),
- (bcsp->rx_skb-> data[bcsp->rx_skb->len - 2] << 8) +
- bcsp->rx_skb->data[bcsp->rx_skb->len - 1]);
+ (bcsp->rx_skb-> data[bcsp->rx_skb->len - 2] << 8) +
+ bcsp->rx_skb->data[bcsp->rx_skb->len - 1]);
kfree_skb(bcsp->rx_skb);
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
@@ -633,7 +666,7 @@ static int bcsp_recv(struct hci_uart *hu, void *data, int count)
bcsp->rx_count = 4;
bcsp->rx_esc_state = BCSP_ESCSTATE_NOESC;
BCSP_CRC_INIT(bcsp->message_crc);
-
+
/* Do not increment ptr or decrement count
* Allocate packet. Max len of a BCSP pkt=
* 0xFFF (payload) +4 (header) +2 (crc) */
@@ -698,6 +731,9 @@ static int bcsp_open(struct hci_uart *hu)
bcsp->rx_state = BCSP_W4_PKT_DELIMITER;
+ if (txcrc)
+ bcsp->use_crc = 1;
+
return 0;
}
@@ -718,18 +754,19 @@ static int bcsp_close(struct hci_uart *hu)
}
static struct hci_uart_proto bcsp = {
- .id = HCI_UART_BCSP,
- .open = bcsp_open,
- .close = bcsp_close,
- .enqueue = bcsp_enqueue,
- .dequeue = bcsp_dequeue,
- .recv = bcsp_recv,
- .flush = bcsp_flush
+ .id = HCI_UART_BCSP,
+ .open = bcsp_open,
+ .close = bcsp_close,
+ .enqueue = bcsp_enqueue,
+ .dequeue = bcsp_dequeue,
+ .recv = bcsp_recv,
+ .flush = bcsp_flush
};
int bcsp_init(void)
{
int err = hci_uart_register_proto(&bcsp);
+
if (!err)
BT_INFO("HCI BCSP protocol initialized");
else
@@ -743,5 +780,8 @@ int bcsp_deinit(void)
return hci_uart_unregister_proto(&bcsp);
}
+module_param(txcrc, bool, 0644);
+MODULE_PARM_DESC(txcrc, "Transmit CRC with every BCSP packet");
+
module_param(hciextn, bool, 0644);
MODULE_PARM_DESC(hciextn, "Convert HCI Extensions into BCSP packets");
diff --git a/drivers/bluetooth/hci_bcsp.h b/drivers/bluetooth/hci_bcsp.h
deleted file mode 100644
index a2b3bb92274b..000000000000
--- a/drivers/bluetooth/hci_bcsp.h
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- BlueCore Serial Protocol (BCSP) for Linux Bluetooth stack (BlueZ).
- Copyright 2002 by Fabrizio Gennari
-
- Based on
- hci_h4.c by Maxim Krasnyansky
- ABCSP by Carl Orsborn
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
-/*
- * $Id: hci_bcsp.h,v 1.2 2002/09/26 05:05:14 maxk Exp $
- */
-
-#ifndef __HCI_BCSP_H__
-#define __HCI_BCSP_H__
-
-#define BCSP_TXWINSIZE 4
-
-#define BCSP_ACK_PKT 0x05
-#define BCSP_LE_PKT 0x06
-
-struct bcsp_struct {
- struct sk_buff_head unack; /* Unack'ed packets queue */
- struct sk_buff_head rel; /* Reliable packets queue */
- struct sk_buff_head unrel; /* Unreliable packets queue */
-
- unsigned long rx_count;
- struct sk_buff *rx_skb;
- u8 rxseq_txack; /* rxseq == txack. */
- u8 rxack; /* Last packet sent by us that the peer ack'ed */
- struct timer_list tbcsp;
-
- enum {
- BCSP_W4_PKT_DELIMITER,
- BCSP_W4_PKT_START,
- BCSP_W4_BCSP_HDR,
- BCSP_W4_DATA,
- BCSP_W4_CRC
- } rx_state;
-
- enum {
- BCSP_ESCSTATE_NOESC,
- BCSP_ESCSTATE_ESC
- } rx_esc_state;
-
- u16 message_crc;
- u8 txack_req; /* Do we need to send ack's to the peer? */
-
- /* Reliable packet sequence number - used to assign seq to each rel pkt. */
- u8 msgq_txseq;
-};
-
-#endif /* __HCI_BCSP_H__ */
diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c
index cf8a22d58d96..12e369a66fc2 100644
--- a/drivers/bluetooth/hci_h4.c
+++ b/drivers/bluetooth/hci_h4.c
@@ -1,33 +1,27 @@
-/*
- BlueZ - Bluetooth protocol stack for Linux
- Copyright (C) 2000-2001 Qualcomm Incorporated
-
- Written 2000,2001 by Maxim Krasnyansky
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
/*
- * Bluetooth HCI UART(H4) protocol.
*
- * $Id: hci_h4.c,v 1.3 2002/09/09 01:17:32 maxk Exp $
+ * Bluetooth HCI UART driver
+ *
+ * Copyright (C) 2000-2001 Qualcomm Incorporated
+ * Copyright (C) 2002-2003 Maxim Krasnyansky
+ * Copyright (C) 2004-2005 Marcel Holtmann
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
*/
-#define VERSION "1.2"
#include
#include
@@ -51,24 +45,41 @@
#include
#include
+
#include "hci_uart.h"
-#include "hci_h4.h"
#ifndef CONFIG_BT_HCIUART_DEBUG
#undef BT_DBG
#define BT_DBG( A... )
#endif
+#define VERSION "1.2"
+
+struct h4_struct {
+ unsigned long rx_state;
+ unsigned long rx_count;
+ struct sk_buff *rx_skb;
+ struct sk_buff_head txq;
+};
+
+/* H4 receiver States */
+#define H4_W4_PACKET_TYPE 0
+#define H4_W4_EVENT_HDR 1
+#define H4_W4_ACL_HDR 2
+#define H4_W4_SCO_HDR 3
+#define H4_W4_DATA 4
+
/* Initialize protocol */
static int h4_open(struct hci_uart *hu)
{
struct h4_struct *h4;
-
+
BT_DBG("hu %p", hu);
-
+
h4 = kmalloc(sizeof(*h4), GFP_ATOMIC);
if (!h4)
return -ENOMEM;
+
memset(h4, 0, sizeof(*h4));
skb_queue_head_init(&h4->txq);
@@ -83,7 +94,9 @@ static int h4_flush(struct hci_uart *hu)
struct h4_struct *h4 = hu->priv;
BT_DBG("hu %p", hu);
+
skb_queue_purge(&h4->txq);
+
return 0;
}
@@ -91,16 +104,19 @@ static int h4_flush(struct hci_uart *hu)
static int h4_close(struct hci_uart *hu)
{
struct h4_struct *h4 = hu->priv;
+
hu->priv = NULL;
BT_DBG("hu %p", hu);
skb_queue_purge(&h4->txq);
+
if (h4->rx_skb)
kfree_skb(h4->rx_skb);
hu->priv = NULL;
kfree(h4);
+
return 0;
}
@@ -114,6 +130,7 @@ static int h4_enqueue(struct hci_uart *hu, struct sk_buff *skb)
/* Prepend skb with frame type */
memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1);
skb_queue_tail(&h4->txq, skb);
+
return 0;
}
@@ -122,6 +139,7 @@ static inline int h4_check_data_len(struct h4_struct *h4, int len)
register int room = skb_tailroom(h4->rx_skb);
BT_DBG("len %d room %d", len, room);
+
if (!len) {
hci_recv_frame(h4->rx_skb);
} else if (len > room) {
@@ -136,6 +154,7 @@ static inline int h4_check_data_len(struct h4_struct *h4, int len)
h4->rx_state = H4_W4_PACKET_TYPE;
h4->rx_skb = NULL;
h4->rx_count = 0;
+
return 0;
}
@@ -228,6 +247,7 @@ static int h4_recv(struct hci_uart *hu, void *data, int count)
ptr++; count--;
continue;
};
+
ptr++; count--;
/* Allocate packet */
@@ -238,9 +258,11 @@ static int h4_recv(struct hci_uart *hu, void *data, int count)
h4->rx_count = 0;
return 0;
}
+
h4->rx_skb->dev = (void *) hu->hdev;
bt_cb(h4->rx_skb)->pkt_type = type;
}
+
return count;
}
@@ -251,23 +273,24 @@ static struct sk_buff *h4_dequeue(struct hci_uart *hu)
}
static struct hci_uart_proto h4p = {
- .id = HCI_UART_H4,
- .open = h4_open,
- .close = h4_close,
- .recv = h4_recv,
- .enqueue = h4_enqueue,
- .dequeue = h4_dequeue,
- .flush = h4_flush,
+ .id = HCI_UART_H4,
+ .open = h4_open,
+ .close = h4_close,
+ .recv = h4_recv,
+ .enqueue = h4_enqueue,
+ .dequeue = h4_dequeue,
+ .flush = h4_flush,
};
-
+
int h4_init(void)
{
int err = hci_uart_register_proto(&h4p);
+
if (!err)
BT_INFO("HCI H4 protocol initialized");
else
BT_ERR("HCI H4 protocol registration failed");
-
+
return err;
}
diff --git a/drivers/bluetooth/hci_h4.h b/drivers/bluetooth/hci_h4.h
deleted file mode 100644
index b95ff54bfd47..000000000000
--- a/drivers/bluetooth/hci_h4.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- BlueZ - Bluetooth protocol stack for Linux
- Copyright (C) 2000-2001 Qualcomm Incorporated
-
- Written 2000,2001 by Maxim Krasnyansky
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License version 2 as
- published by the Free Software Foundation;
-
- THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
- OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
- IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
- CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
- WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
-
- ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
- COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
- SOFTWARE IS DISCLAIMED.
-*/
-
-/*
- * $Id: hci_h4.h,v 1.2 2002/09/09 01:17:32 maxk Exp $
- */
-
-#ifdef __KERNEL__
-struct h4_struct {
- unsigned long rx_state;
- unsigned long rx_count;
- struct sk_buff *rx_skb;
- struct sk_buff_head txq;
-};
-
-/* H4 receiver States */
-#define H4_W4_PACKET_TYPE 0
-#define H4_W4_EVENT_HDR 1
-#define H4_W4_ACL_HDR 2
-#define H4_W4_SCO_HDR 3
-#define H4_W4_DATA 4
-
-#endif /* __KERNEL__ */
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
index aed80cc22890..4a775f6ea390 100644
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -1,33 +1,27 @@
-/*
- BlueZ - Bluetooth protocol stack for Linux
- Copyright (C) 2000-2001 Qualcomm Incorporated
-
- Written 2000,2001 by Maxim Krasnyansky