i2c-voodoo3: Delete

Superseded by tdfxfb. I2C/DDC support used to live in a separate
driver but this caused driver conflicts.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Krzysztof Helt <krzysztof.h1@wp.pl>
This commit is contained in:
Jean Delvare 2009-12-06 17:06:21 +01:00
parent bc6286e50b
commit a0c11cdd6a
5 changed files with 0 additions and 338 deletions

View File

@ -419,15 +419,6 @@ Who: Alex Chiang <achiang@hp.com>
---------------------------
What: i2c-voodoo3 driver
When: October 2009
Why: Superseded by tdfxfb. I2C/DDC support used to live in a separate
driver but this caused driver conflicts.
Who: Jean Delvare <khali@linux-fr.org>
Krzysztof Helt <krzysztof.h1@wp.pl>
---------------------------
What: CONFIG_RFKILL_INPUT
When: 2.6.33
Why: Should be implemented in userspace, policy daemon.

View File

@ -1,62 +0,0 @@
Kernel driver i2c-voodoo3
Supported adapters:
* 3dfx Voodoo3 based cards
* Voodoo Banshee based cards
Authors:
Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Ralph Metzler <rjkm@thp.uni-koeln.de>,
Mark D. Studebaker <mdsxyz123@yahoo.com>
Main contact: Philip Edelbrock <phil@netroedge.com>
The code is based upon Ralph's test code (he did the hard stuff ;')
Description
-----------
The 3dfx Voodoo3 chip contains two I2C interfaces (aka a I2C 'master' or
'host').
The first interface is used for DDC (Data Display Channel) which is a
serial channel through the VGA monitor connector to a DDC-compliant
monitor. This interface is defined by the Video Electronics Standards
Association (VESA). The standards are available for purchase at
http://www.vesa.org .
The second interface is a general-purpose I2C bus. The intent by 3dfx was
to allow manufacturers to add extra chips to the video card such as a
TV-out chip such as the BT869 or possibly even I2C based temperature
sensors like the ADM1021 or LM75.
Stability
---------
Seems to be stable on the test machine, but needs more testing on other
machines. Simultaneous accesses of the DDC and I2C busses may cause errors.
Supported Devices
-----------------
Specifically, this driver was written and tested on the '3dfx Voodoo3 AGP
3000' which has a tv-out feature (s-video or composite). According to the
docs and discussions, this code should work for any Voodoo3 based cards as
well as Voodoo Banshee based cards. The DDC interface has been tested on a
Voodoo Banshee card.
Issues
------
Probably many, but it seems to work OK on my system. :')
External Device Connection
--------------------------
The digital video input jumpers give availability to the I2C bus.
Specifically, pins 13 and 25 (bottom row middle, and bottom right-end) are
the I2C clock and I2C data lines, respectively. +5V and GND are probably
also easily available making the addition of extra I2C/SMBus devices easy
to implement.

View File

@ -640,22 +640,6 @@ config I2C_TINY_USB
This driver can also be built as a module. If so, the module
will be called i2c-tiny-usb.
comment "Graphics adapter I2C/DDC channel drivers"
depends on PCI
config I2C_VOODOO3
tristate "Voodoo 3 (DEPRECATED)"
depends on PCI
select I2C_ALGOBIT
help
If you say yes to this option, support will be included for the
Voodoo 3 I2C interface. This driver is deprecated and you should
use the tdfxfb driver instead, which additionally provides
framebuffer support.
This driver can also be built as a module. If so, the module
will be called i2c-voodoo3.
comment "Other I2C/SMBus bus drivers"
config I2C_ACORN

View File

@ -61,9 +61,6 @@ obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o
# Graphics adapter I2C/DDC channel drivers
obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
# Other I2C/SMBus bus drivers
obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o

View File

@ -1,248 +0,0 @@
/*
Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>,
Philip Edelbrock <phil@netroedge.com>,
Ralph Metzler <rjkm@thp.uni-koeln.de>, and
Mark D. Studebaker <mdsxyz123@yahoo.com>
Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and
Simon Vogl
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* This interfaces to the I2C bus of the Voodoo3 to gain access to
the BT869 and possibly other I2C devices. */
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#include <asm/io.h>
/* the only registers we use */
#define REG 0x78
#define REG2 0x70
/* bit locations in the register */
#define DDC_ENAB 0x00040000
#define DDC_SCL_OUT 0x00080000
#define DDC_SDA_OUT 0x00100000
#define DDC_SCL_IN 0x00200000
#define DDC_SDA_IN 0x00400000
#define I2C_ENAB 0x00800000
#define I2C_SCL_OUT 0x01000000
#define I2C_SDA_OUT 0x02000000
#define I2C_SCL_IN 0x04000000
#define I2C_SDA_IN 0x08000000
/* initialization states */
#define INIT2 0x2
#define INIT3 0x4
/* delays */
#define CYCLE_DELAY 10
#define TIMEOUT (HZ / 2)
static void __iomem *ioaddr;
/* The voo GPIO registers don't have individual masks for each bit
so we always have to read before writing. */
static void bit_vooi2c_setscl(void *data, int val)
{
unsigned int r;
r = readl(ioaddr + REG);
if (val)
r |= I2C_SCL_OUT;
else
r &= ~I2C_SCL_OUT;
writel(r, ioaddr + REG);
readl(ioaddr + REG); /* flush posted write */
}
static void bit_vooi2c_setsda(void *data, int val)
{
unsigned int r;
r = readl(ioaddr + REG);
if (val)
r |= I2C_SDA_OUT;
else
r &= ~I2C_SDA_OUT;
writel(r, ioaddr + REG);
readl(ioaddr + REG); /* flush posted write */
}
/* The GPIO pins are open drain, so the pins always remain outputs.
We rely on the i2c-algo-bit routines to set the pins high before
reading the input from other chips. */
static int bit_vooi2c_getscl(void *data)
{
return (0 != (readl(ioaddr + REG) & I2C_SCL_IN));
}
static int bit_vooi2c_getsda(void *data)
{
return (0 != (readl(ioaddr + REG) & I2C_SDA_IN));
}
static void bit_vooddc_setscl(void *data, int val)
{
unsigned int r;
r = readl(ioaddr + REG);
if (val)
r |= DDC_SCL_OUT;
else
r &= ~DDC_SCL_OUT;
writel(r, ioaddr + REG);
readl(ioaddr + REG); /* flush posted write */
}
static void bit_vooddc_setsda(void *data, int val)
{
unsigned int r;
r = readl(ioaddr + REG);
if (val)
r |= DDC_SDA_OUT;
else
r &= ~DDC_SDA_OUT;
writel(r, ioaddr + REG);
readl(ioaddr + REG); /* flush posted write */
}
static int bit_vooddc_getscl(void *data)
{
return (0 != (readl(ioaddr + REG) & DDC_SCL_IN));
}
static int bit_vooddc_getsda(void *data)
{
return (0 != (readl(ioaddr + REG) & DDC_SDA_IN));
}
static int config_v3(struct pci_dev *dev)
{
unsigned long cadr;
/* map Voodoo3 memory */
cadr = dev->resource[0].start;
cadr &= PCI_BASE_ADDRESS_MEM_MASK;
ioaddr = ioremap_nocache(cadr, 0x1000);
if (ioaddr) {
writel(0x8160, ioaddr + REG2);
writel(0xcffc0020, ioaddr + REG);
dev_info(&dev->dev, "Using Banshee/Voodoo3 I2C device at %p\n", ioaddr);
return 0;
}
return -ENODEV;
}
static struct i2c_algo_bit_data voo_i2c_bit_data = {
.setsda = bit_vooi2c_setsda,
.setscl = bit_vooi2c_setscl,
.getsda = bit_vooi2c_getsda,
.getscl = bit_vooi2c_getscl,
.udelay = CYCLE_DELAY,
.timeout = TIMEOUT
};
static struct i2c_adapter voodoo3_i2c_adapter = {
.owner = THIS_MODULE,
.name = "I2C Voodoo3/Banshee adapter",
.algo_data = &voo_i2c_bit_data,
};
static struct i2c_algo_bit_data voo_ddc_bit_data = {
.setsda = bit_vooddc_setsda,
.setscl = bit_vooddc_setscl,
.getsda = bit_vooddc_getsda,
.getscl = bit_vooddc_getscl,
.udelay = CYCLE_DELAY,
.timeout = TIMEOUT
};
static struct i2c_adapter voodoo3_ddc_adapter = {
.owner = THIS_MODULE,
.class = I2C_CLASS_DDC,
.name = "DDC Voodoo3/Banshee adapter",
.algo_data = &voo_ddc_bit_data,
};
static struct pci_device_id voodoo3_ids[] __devinitdata = {
{ PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO3) },
{ PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_BANSHEE) },
{ 0, }
};
MODULE_DEVICE_TABLE (pci, voodoo3_ids);
static int __devinit voodoo3_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
int retval;
retval = config_v3(dev);
if (retval)
return retval;
/* set up the sysfs linkage to our parent device */
voodoo3_i2c_adapter.dev.parent = &dev->dev;
voodoo3_ddc_adapter.dev.parent = &dev->dev;
retval = i2c_bit_add_bus(&voodoo3_i2c_adapter);
if (retval)
return retval;
retval = i2c_bit_add_bus(&voodoo3_ddc_adapter);
if (retval)
i2c_del_adapter(&voodoo3_i2c_adapter);
return retval;
}
static void __devexit voodoo3_remove(struct pci_dev *dev)
{
i2c_del_adapter(&voodoo3_i2c_adapter);
i2c_del_adapter(&voodoo3_ddc_adapter);
iounmap(ioaddr);
}
static struct pci_driver voodoo3_driver = {
.name = "voodoo3_smbus",
.id_table = voodoo3_ids,
.probe = voodoo3_probe,
.remove = __devexit_p(voodoo3_remove),
};
static int __init i2c_voodoo3_init(void)
{
return pci_register_driver(&voodoo3_driver);
}
static void __exit i2c_voodoo3_exit(void)
{
pci_unregister_driver(&voodoo3_driver);
}
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, "
"Philip Edelbrock <phil@netroedge.com>, "
"Ralph Metzler <rjkm@thp.uni-koeln.de>, "
"and Mark D. Studebaker <mdsxyz123@yahoo.com>");
MODULE_DESCRIPTION("Voodoo3 I2C/SMBus driver");
MODULE_LICENSE("GPL");
module_init(i2c_voodoo3_init);
module_exit(i2c_voodoo3_exit);