gve: Add workqueue and reset support

Add support for the workqueue to handle management interrupts and
support for resets.

Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: Sagi Shahar <sagis@google.com>
Signed-off-by: Jon Olson <jonolson@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: Luigi Rizzo <lrizzo@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Catherine Sullivan 2019-07-01 15:57:54 -07:00 committed by David S. Miller
parent f5cedc84a3
commit 9e5f7d26a4
4 changed files with 260 additions and 8 deletions

View File

@ -40,6 +40,8 @@ The driver interacts with the device in the following ways:
- See gve_register.h for more detail
- Admin Queue
- See description below
- Reset
- At any time the device can be reset
- Interrupts
- See supported interrupts below
- Transmit and Receive Queues
@ -69,6 +71,12 @@ the following (with proper locking):
The device will update the status field in each AQ command reported as
executed through the ADMIN_QUEUE_EVENT_COUNTER register.
Device Resets
-------------
A device reset is triggered by writing 0x0 to the AQ PFN register.
This causes the device to release all resources allocated by the
driver, including the AQ itself.
Interrupts
----------
The following interrupts are supported by the driver:
@ -78,6 +86,9 @@ Management Interrupt
The management interrupt is used by the device to tell the driver to
look at the GVE_DEVICE_STATUS register.
The handler for the management irq simply queues the service task in
the workqueue to check the register and acks the irq.
Notification Block Interrupts
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The notification block interrupts are used to tell the driver to poll

View File

@ -205,9 +205,18 @@ struct gve_priv {
u32 adminq_mask; /* masks prod_cnt to adminq size */
u32 adminq_prod_cnt; /* free-running count of AQ cmds executed */
struct workqueue_struct *gve_wq;
struct work_struct service_task;
unsigned long service_task_flags;
unsigned long state_flags;
};
enum gve_service_task_flags {
GVE_PRIV_FLAGS_DO_RESET = BIT(1),
GVE_PRIV_FLAGS_RESET_IN_PROGRESS = BIT(2),
GVE_PRIV_FLAGS_PROBE_IN_PROGRESS = BIT(3),
};
enum gve_state_flags {
GVE_PRIV_FLAGS_ADMIN_QUEUE_OK = BIT(1),
GVE_PRIV_FLAGS_DEVICE_RESOURCES_OK = BIT(2),
@ -215,6 +224,53 @@ enum gve_state_flags {
GVE_PRIV_FLAGS_NAPI_ENABLED = BIT(4),
};
static inline bool gve_get_do_reset(struct gve_priv *priv)
{
return test_bit(GVE_PRIV_FLAGS_DO_RESET, &priv->service_task_flags);
}
static inline void gve_set_do_reset(struct gve_priv *priv)
{
set_bit(GVE_PRIV_FLAGS_DO_RESET, &priv->service_task_flags);
}
static inline void gve_clear_do_reset(struct gve_priv *priv)
{
clear_bit(GVE_PRIV_FLAGS_DO_RESET, &priv->service_task_flags);
}
static inline bool gve_get_reset_in_progress(struct gve_priv *priv)
{
return test_bit(GVE_PRIV_FLAGS_RESET_IN_PROGRESS,
&priv->service_task_flags);
}
static inline void gve_set_reset_in_progress(struct gve_priv *priv)
{
set_bit(GVE_PRIV_FLAGS_RESET_IN_PROGRESS, &priv->service_task_flags);
}
static inline void gve_clear_reset_in_progress(struct gve_priv *priv)
{
clear_bit(GVE_PRIV_FLAGS_RESET_IN_PROGRESS, &priv->service_task_flags);
}
static inline bool gve_get_probe_in_progress(struct gve_priv *priv)
{
return test_bit(GVE_PRIV_FLAGS_PROBE_IN_PROGRESS,
&priv->service_task_flags);
}
static inline void gve_set_probe_in_progress(struct gve_priv *priv)
{
set_bit(GVE_PRIV_FLAGS_PROBE_IN_PROGRESS, &priv->service_task_flags);
}
static inline void gve_clear_probe_in_progress(struct gve_priv *priv)
{
clear_bit(GVE_PRIV_FLAGS_PROBE_IN_PROGRESS, &priv->service_task_flags);
}
static inline bool gve_get_admin_queue_ok(struct gve_priv *priv)
{
return test_bit(GVE_PRIV_FLAGS_ADMIN_QUEUE_OK, &priv->state_flags);
@ -390,4 +446,10 @@ int gve_rx_alloc_rings(struct gve_priv *priv);
void gve_rx_free_rings(struct gve_priv *priv);
bool gve_clean_rx_done(struct gve_rx_ring *rx, int budget,
netdev_features_t feat);
/* Reset */
void gve_schedule_reset(struct gve_priv *priv);
int gve_reset(struct gve_priv *priv, bool attempt_teardown);
int gve_adjust_queues(struct gve_priv *priv,
struct gve_queue_config new_rx_config,
struct gve_queue_config new_tx_config);
#endif /* _GVE_H_ */

View File

@ -11,6 +11,7 @@
#include <linux/pci.h>
#include <linux/sched.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
#include <net/sch_generic.h>
#include "gve.h"
#include "gve_adminq.h"
@ -77,6 +78,9 @@ static void gve_free_counter_array(struct gve_priv *priv)
static irqreturn_t gve_mgmnt_intr(int irq, void *arg)
{
struct gve_priv *priv = arg;
queue_work(priv->gve_wq, &priv->service_task);
return IRQ_HANDLED;
}
@ -284,6 +288,8 @@ abort_with_counter:
return err;
}
static void gve_trigger_reset(struct gve_priv *priv);
static void gve_teardown_device_resources(struct gve_priv *priv)
{
int err;
@ -295,7 +301,7 @@ static void gve_teardown_device_resources(struct gve_priv *priv)
dev_err(&priv->pdev->dev,
"Could not deconfigure device resources: err=%d\n",
err);
return;
gve_trigger_reset(priv);
}
}
gve_free_counter_array(priv);
@ -330,6 +336,9 @@ static int gve_register_qpls(struct gve_priv *priv)
netif_err(priv, drv, priv->dev,
"failed to register queue page list %d\n",
priv->qpls[i].id);
/* This failure will trigger a reset - no need to clean
* up
*/
return err;
}
}
@ -344,6 +353,7 @@ static int gve_unregister_qpls(struct gve_priv *priv)
for (i = 0; i < num_qpls; i++) {
err = gve_adminq_unregister_page_list(priv, priv->qpls[i].id);
/* This failure will trigger a reset - no need to clean up */
if (err) {
netif_err(priv, drv, priv->dev,
"Failed to unregister queue page list %d\n",
@ -364,6 +374,9 @@ static int gve_create_rings(struct gve_priv *priv)
if (err) {
netif_err(priv, drv, priv->dev, "failed to create tx queue %d\n",
i);
/* This failure will trigger a reset - no need to clean
* up
*/
return err;
}
netif_dbg(priv, drv, priv->dev, "created tx queue %d\n", i);
@ -373,6 +386,9 @@ static int gve_create_rings(struct gve_priv *priv)
if (err) {
netif_err(priv, drv, priv->dev, "failed to create rx queue %d\n",
i);
/* This failure will trigger a reset - no need to clean
* up
*/
return err;
}
/* Rx data ring has been prefilled with packet buffers at
@ -448,6 +464,9 @@ static int gve_destroy_rings(struct gve_priv *priv)
netif_err(priv, drv, priv->dev,
"failed to destroy tx queue %d\n",
i);
/* This failure will trigger a reset - no need to clean
* up
*/
return err;
}
netif_dbg(priv, drv, priv->dev, "destroyed tx queue %d\n", i);
@ -458,6 +477,9 @@ static int gve_destroy_rings(struct gve_priv *priv)
netif_err(priv, drv, priv->dev,
"failed to destroy rx queue %d\n",
i);
/* This failure will trigger a reset - no need to clean
* up
*/
return err;
}
netif_dbg(priv, drv, priv->dev, "destroyed rx queue %d\n", i);
@ -626,6 +648,18 @@ static void gve_free_qpls(struct gve_priv *priv)
kfree(priv->qpls);
}
/* Use this to schedule a reset when the device is capable of continuing
* to handle other requests in its current state. If it is not, do a reset
* in thread instead.
*/
void gve_schedule_reset(struct gve_priv *priv)
{
gve_set_do_reset(priv);
queue_work(priv->gve_wq, &priv->service_task);
}
static void gve_reset_and_teardown(struct gve_priv *priv, bool was_up);
static int gve_reset_recovery(struct gve_priv *priv, bool was_up);
static void gve_turndown(struct gve_priv *priv);
static void gve_turnup(struct gve_priv *priv);
@ -650,10 +684,10 @@ static int gve_open(struct net_device *dev)
err = gve_register_qpls(priv);
if (err)
return err;
goto reset;
err = gve_create_rings(priv);
if (err)
return err;
goto reset;
gve_set_device_rings_ok(priv);
gve_turnup(priv);
@ -665,6 +699,19 @@ free_rings:
free_qpls:
gve_free_qpls(priv);
return err;
reset:
/* This must have been called from a reset due to the rtnl lock
* so just return at this point.
*/
if (gve_get_reset_in_progress(priv))
return err;
/* Otherwise reset before returning */
gve_reset_and_teardown(priv, true);
/* if this fails there is nothing we can do so just ignore the return */
gve_reset_recovery(priv, false);
/* return the original error */
return err;
}
static int gve_close(struct net_device *dev)
@ -677,16 +724,26 @@ static int gve_close(struct net_device *dev)
gve_turndown(priv);
err = gve_destroy_rings(priv);
if (err)
return err;
goto err;
err = gve_unregister_qpls(priv);
if (err)
return err;
goto err;
gve_clear_device_rings_ok(priv);
}
gve_free_rings(priv);
gve_free_qpls(priv);
return 0;
err:
/* This must have been called from a reset due to the rtnl lock
* so just return at this point.
*/
if (gve_get_reset_in_progress(priv))
return err;
/* Otherwise reset before returning */
gve_reset_and_teardown(priv, true);
return gve_reset_recovery(priv, false);
}
static void gve_turndown(struct gve_priv *priv)
@ -749,6 +806,7 @@ static void gve_tx_timeout(struct net_device *dev)
{
struct gve_priv *priv = netdev_priv(dev);
gve_schedule_reset(priv);
priv->tx_timeo_cnt++;
}
@ -760,6 +818,42 @@ static const struct net_device_ops gve_netdev_ops = {
.ndo_tx_timeout = gve_tx_timeout,
};
static void gve_handle_status(struct gve_priv *priv, u32 status)
{
if (GVE_DEVICE_STATUS_RESET_MASK & status) {
dev_info(&priv->pdev->dev, "Device requested reset.\n");
gve_set_do_reset(priv);
}
}
static void gve_handle_reset(struct gve_priv *priv)
{
/* A service task will be scheduled at the end of probe to catch any
* resets that need to happen, and we don't want to reset until
* probe is done.
*/
if (gve_get_probe_in_progress(priv))
return;
if (gve_get_do_reset(priv)) {
rtnl_lock();
gve_reset(priv, false);
rtnl_unlock();
}
}
/* Handle NIC status register changes and reset requests */
static void gve_service_task(struct work_struct *work)
{
struct gve_priv *priv = container_of(work, struct gve_priv,
service_task);
gve_handle_status(priv,
ioread32be(&priv->reg_bar0->device_status));
gve_handle_reset(priv);
}
static int gve_init_priv(struct gve_priv *priv, bool skip_describe_device)
{
int num_ntfy;
@ -847,6 +941,72 @@ static void gve_teardown_priv_resources(struct gve_priv *priv)
gve_adminq_free(&priv->pdev->dev, priv);
}
static void gve_trigger_reset(struct gve_priv *priv)
{
/* Reset the device by releasing the AQ */
gve_adminq_release(priv);
}
static void gve_reset_and_teardown(struct gve_priv *priv, bool was_up)
{
gve_trigger_reset(priv);
/* With the reset having already happened, close cannot fail */
if (was_up)
gve_close(priv->dev);
gve_teardown_priv_resources(priv);
}
static int gve_reset_recovery(struct gve_priv *priv, bool was_up)
{
int err;
err = gve_init_priv(priv, true);
if (err)
goto err;
if (was_up) {
err = gve_open(priv->dev);
if (err)
goto err;
}
return 0;
err:
dev_err(&priv->pdev->dev, "Reset failed! !!! DISABLING ALL QUEUES !!!\n");
gve_turndown(priv);
return err;
}
int gve_reset(struct gve_priv *priv, bool attempt_teardown)
{
bool was_up = netif_carrier_ok(priv->dev);
int err;
dev_info(&priv->pdev->dev, "Performing reset\n");
gve_clear_do_reset(priv);
gve_set_reset_in_progress(priv);
/* If we aren't attempting to teardown normally, just go turndown and
* reset right away.
*/
if (!attempt_teardown) {
gve_turndown(priv);
gve_reset_and_teardown(priv, was_up);
} else {
/* Otherwise attempt to close normally */
if (was_up) {
err = gve_close(priv->dev);
/* If that fails reset as we did above */
if (err)
gve_reset_and_teardown(priv, was_up);
}
/* Clean up any remaining resources */
gve_teardown_priv_resources(priv);
}
/* Set it all back up */
err = gve_reset_recovery(priv, was_up);
gve_clear_reset_in_progress(priv);
return err;
}
static void gve_write_version(u8 __iomem *driver_version_register)
{
const char *c = gve_version_prefix;
@ -943,21 +1103,36 @@ static int gve_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
priv->msg_enable = DEFAULT_MSG_LEVEL;
priv->reg_bar0 = reg_bar;
priv->db_bar2 = db_bar;
priv->service_task_flags = 0x0;
priv->state_flags = 0x0;
gve_set_probe_in_progress(priv);
priv->gve_wq = alloc_ordered_workqueue("gve", 0);
if (!priv->gve_wq) {
dev_err(&pdev->dev, "Could not allocate workqueue");
err = -ENOMEM;
goto abort_with_netdev;
}
INIT_WORK(&priv->service_task, gve_service_task);
priv->tx_cfg.max_queues = max_tx_queues;
priv->rx_cfg.max_queues = max_rx_queues;
err = gve_init_priv(priv, false);
if (err)
goto abort_with_netdev;
goto abort_with_wq;
err = register_netdev(dev);
if (err)
goto abort_with_netdev;
goto abort_with_wq;
dev_info(&pdev->dev, "GVE version %s\n", gve_version_str);
gve_clear_probe_in_progress(priv);
queue_work(priv->gve_wq, &priv->service_task);
return 0;
abort_with_wq:
destroy_workqueue(priv->gve_wq);
abort_with_netdev:
free_netdev(dev);
@ -985,6 +1160,7 @@ static void gve_remove(struct pci_dev *pdev)
unregister_netdev(netdev);
gve_teardown_priv_resources(priv);
destroy_workqueue(priv->gve_wq);
free_netdev(netdev);
pci_iounmap(pdev, db_bar);
pci_iounmap(pdev, reg_bar);

View File

@ -334,6 +334,9 @@ static bool gve_rx(struct gve_rx_ring *rx, struct gve_rx_desc *rx_desc,
#endif
have_skb:
/* We didn't manage to allocate an skb but we haven't had any
* reset worthy failures.
*/
if (!skb)
return true;
@ -399,7 +402,7 @@ bool gve_clean_rx_done(struct gve_rx_ring *rx, int budget,
rx->desc.seqno);
bytes += be16_to_cpu(desc->len) - GVE_RX_PAD;
if (!gve_rx(rx, desc, feat))
return false;
gve_schedule_reset(priv);
cnt++;
idx = cnt & rx->desc.mask;
desc = rx->desc.desc_ring + idx;