diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 3b3a21d1a6ba..1823212c6b46 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -145,27 +145,27 @@ config MTD_NAND_PPCHAMELEONEVB This enables the NAND flash driver on the PPChameleon EVB Board. config MTD_NAND_S3C2410 - tristate "NAND Flash support for S3C2410/S3C2440 SoC" - depends on ARCH_S3C2410 + tristate "NAND Flash support for Samsung S3C SoCs" + depends on ARCH_S3C2410 || ARCH_S3C64XX help - This enables the NAND flash controller on the S3C2410 and S3C2440 + This enables the NAND flash controller on the S3C24xx and S3C64xx SoCs No board specific support is done by this driver, each board must advertise a platform_device for the driver to attach. config MTD_NAND_S3C2410_DEBUG - bool "S3C2410 NAND driver debug" + bool "Samsung S3C NAND driver debug" depends on MTD_NAND_S3C2410 help - Enable debugging of the S3C2410 NAND driver + Enable debugging of the S3C NAND driver config MTD_NAND_S3C2410_HWECC - bool "S3C2410 NAND Hardware ECC" + bool "Samsung S3C NAND Hardware ECC" depends on MTD_NAND_S3C2410 help - Enable the use of the S3C2410's internal ECC generator when - using NAND. Early versions of the chip have had problems with + Enable the use of the controller's internal ECC generator when + using NAND. Early versions of the chips have had problems with incorrect ECC generation, and if using these, the default of software ECC is preferable. @@ -177,7 +177,7 @@ config MTD_NAND_NDFC NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs config MTD_NAND_S3C2410_CLKSTOP - bool "S3C2410 NAND IDLE clock stop" + bool "Samsung S3C NAND IDLE clock stop" depends on MTD_NAND_S3C2410 default n help diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 01a105eda3f4..11dc7e69c4fb 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -1111,6 +1111,9 @@ static struct platform_device_id s3c24xx_driver_ids[] = { }, { .name = "s3c2412-nand", .driver_data = TYPE_S3C2412, + }, { + .name = "s3c6400-nand", + .driver_data = TYPE_S3C2412, /* compatible with 2412 */ }, { } };