S2io: Removed receive buffer replenishment tasklet

- Removed receive buffer replenishment tasklet s2io_tasklet and instead
  allocating the receive buffers in either the interrupt handler (no napi)
  or the napi handler (napi enabled).

Signed-off-by: Surjit Reang <surjit.reang@neterion.com>
Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
Signed-off-by: Ramkrishna Vepa <ram.vepa@neterion.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
This commit is contained in:
Sreenivasa Honnur 2008-04-23 13:29:42 -04:00 committed by Jeff Garzik
parent 10371b5e6b
commit 99993af698
2 changed files with 4 additions and 92 deletions

View File

@ -117,20 +117,6 @@ static inline int RXD_IS_UP2DT(struct RxD_t *rxdp)
#define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
#define TASKLET_IN_USE test_and_set_bit(0, (&sp->tasklet_status))
#define PANIC 1
#define LOW 2
static inline int rx_buffer_level(struct s2io_nic * sp, int rxb_size, int ring)
{
struct mac_info *mac_control;
mac_control = &sp->mac_control;
if (rxb_size <= rxd_count[sp->rxd_mode])
return PANIC;
else if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16)
return LOW;
return 0;
}
static inline int is_s2io_card_up(const struct s2io_nic * sp)
{
@ -4105,7 +4091,6 @@ static int s2io_close(struct net_device *dev)
do_s2io_delete_unicast_mc(sp, tmp64);
}
/* Reset card, kill tasklet and free Tx and Rx buffers. */
s2io_card_down(sp);
return 0;
@ -4370,29 +4355,9 @@ s2io_alarm_handle(unsigned long data)
static int s2io_chk_rx_buffers(struct s2io_nic *sp, int rng_n)
{
int rxb_size, level;
if (!sp->lro) {
rxb_size = atomic_read(&sp->rx_bufs_left[rng_n]);
level = rx_buffer_level(sp, rxb_size, rng_n);
if ((level == PANIC) && (!TASKLET_IN_USE)) {
int ret;
DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", __FUNCTION__);
DBG_PRINT(INTR_DBG, "PANIC levels\n");
if ((ret = fill_rx_buffers(sp, rng_n)) == -ENOMEM) {
DBG_PRINT(INFO_DBG, "Out of memory in %s",
__FUNCTION__);
clear_bit(0, (&sp->tasklet_status));
return -1;
}
clear_bit(0, (&sp->tasklet_status));
} else if (level == LOW)
tasklet_schedule(&sp->task);
} else if (fill_rx_buffers(sp, rng_n) == -ENOMEM) {
DBG_PRINT(INFO_DBG, "%s:Out of memory", sp->dev->name);
DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
if (fill_rx_buffers(sp, rng_n) == -ENOMEM) {
DBG_PRINT(INFO_DBG, "%s:Out of memory", sp->dev->name);
DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
}
return 0;
}
@ -6769,49 +6734,6 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu)
return ret;
}
/**
* s2io_tasklet - Bottom half of the ISR.
* @dev_adr : address of the device structure in dma_addr_t format.
* Description:
* This is the tasklet or the bottom half of the ISR. This is
* an extension of the ISR which is scheduled by the scheduler to be run
* when the load on the CPU is low. All low priority tasks of the ISR can
* be pushed into the tasklet. For now the tasklet is used only to
* replenish the Rx buffers in the Rx buffer descriptors.
* Return value:
* void.
*/
static void s2io_tasklet(unsigned long dev_addr)
{
struct net_device *dev = (struct net_device *) dev_addr;
struct s2io_nic *sp = dev->priv;
int i, ret;
struct mac_info *mac_control;
struct config_param *config;
mac_control = &sp->mac_control;
config = &sp->config;
if (!TASKLET_IN_USE) {
for (i = 0; i < config->rx_ring_num; i++) {
ret = fill_rx_buffers(sp, i);
if (ret == -ENOMEM) {
DBG_PRINT(INFO_DBG, "%s: Out of ",
dev->name);
DBG_PRINT(INFO_DBG, "memory in tasklet\n");
break;
} else if (ret == -EFILL) {
DBG_PRINT(INFO_DBG,
"%s: Rx Ring %d is full\n",
dev->name, i);
break;
}
}
clear_bit(0, (&sp->tasklet_status));
}
}
/**
* s2io_set_link - Set the LInk status
* @data: long pointer to device private structue
@ -7186,9 +7108,6 @@ static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
s2io_rem_isr(sp);
/* Kill tasklet. */
tasklet_kill(&sp->task);
/* Check if the device is Quiescent and then Reset the NIC */
while(do_io) {
/* As per the HW requirement we need to replenish the
@ -7314,9 +7233,6 @@ static int s2io_card_up(struct s2io_nic * sp)
S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
/* Enable tasklet for the device */
tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
/* Enable select interrupts */
en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS);
if (sp->config.intr_type != INTA)
@ -8119,10 +8035,9 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
s2io_reset(sp);
/*
* Initialize the tasklet status and link state flags
* Initialize link state flags
* and the card state parameter
*/
sp->tasklet_status = 0;
sp->state = 0;
/* Initialize spinlocks */

View File

@ -868,8 +868,6 @@ struct s2io_nic {
int device_enabled_once;
char name[60];
struct tasklet_struct task;
volatile unsigned long tasklet_status;
/* Timer that handles I/O errors/exceptions */
struct timer_list alarm_timer;
@ -1094,7 +1092,6 @@ static void s2io_handle_errors(void * dev_id);
static int s2io_starter(void);
static void s2io_closer(void);
static void s2io_tx_watchdog(struct net_device *dev);
static void s2io_tasklet(unsigned long dev_addr);
static void s2io_set_multicast(struct net_device *dev);
static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp);
static void s2io_link(struct s2io_nic * sp, int link);