diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 3b88f45d8e05..4c936e129500 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -860,6 +860,7 @@ config VIDEO_MT9M032
 config VIDEO_MT9M111
 	tristate "mt9m111, mt9m112 and mt9m131 support"
 	depends on I2C && VIDEO_V4L2
+	select V4L2_FWNODE
 	help
 	  This driver supports MT9M111, MT9M112 and MT9M131 cameras from
 	  Micron/Aptina
diff --git a/drivers/media/i2c/mt9m111.c b/drivers/media/i2c/mt9m111.c
index f97fd32181ed..d639b9bcf64a 100644
--- a/drivers/media/i2c/mt9m111.c
+++ b/drivers/media/i2c/mt9m111.c
@@ -15,6 +15,7 @@
 #include <linux/delay.h>
 #include <linux/v4l2-mediabus.h>
 #include <linux/module.h>
+#include <linux/property.h>
 
 #include <media/v4l2-async.h>
 #include <media/v4l2-clk.h>
@@ -22,6 +23,7 @@
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-event.h>
+#include <media/v4l2-fwnode.h>
 
 /*
  * MT9M111, MT9M112 and MT9M131:
@@ -242,6 +244,8 @@ struct mt9m111 {
 	const struct mt9m111_datafmt *fmt;
 	int lastpage;	/* PageMap cache value */
 	bool is_streaming;
+	/* user point of view - 0: falling 1: rising edge */
+	unsigned int pclk_sample:1;
 #ifdef CONFIG_MEDIA_CONTROLLER
 	struct media_pad pad;
 #endif
@@ -594,6 +598,10 @@ static int mt9m111_set_pixfmt(struct mt9m111 *mt9m111,
 		return -EINVAL;
 	}
 
+	/* receiver samples on falling edge, chip-hw default is rising */
+	if (mt9m111->pclk_sample == 0)
+		mask_outfmt2 |= MT9M111_OUTFMT_INV_PIX_CLOCK;
+
 	ret = mt9m111_reg_mask(client, context_a.output_fmt_ctrl2,
 			       data_outfmt2, mask_outfmt2);
 	if (!ret)
@@ -1084,9 +1092,15 @@ static int mt9m111_s_stream(struct v4l2_subdev *sd, int enable)
 static int mt9m111_g_mbus_config(struct v4l2_subdev *sd,
 				struct v4l2_mbus_config *cfg)
 {
-	cfg->flags = V4L2_MBUS_MASTER | V4L2_MBUS_PCLK_SAMPLE_RISING |
+	struct mt9m111 *mt9m111 = container_of(sd, struct mt9m111, subdev);
+
+	cfg->flags = V4L2_MBUS_MASTER |
 		V4L2_MBUS_HSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_HIGH |
 		V4L2_MBUS_DATA_ACTIVE_HIGH;
+
+	cfg->flags |= mt9m111->pclk_sample ? V4L2_MBUS_PCLK_SAMPLE_RISING :
+		V4L2_MBUS_PCLK_SAMPLE_FALLING;
+
 	cfg->type = V4L2_MBUS_PARALLEL;
 
 	return 0;
@@ -1156,6 +1170,30 @@ done:
 	return ret;
 }
 
+static int mt9m111_probe_fw(struct i2c_client *client, struct mt9m111 *mt9m111)
+{
+	struct v4l2_fwnode_endpoint bus_cfg = {
+		.bus_type = V4L2_MBUS_PARALLEL
+	};
+	struct fwnode_handle *np;
+	int ret;
+
+	np = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), NULL);
+	if (!np)
+		return -EINVAL;
+
+	ret = v4l2_fwnode_endpoint_parse(np, &bus_cfg);
+	if (ret)
+		goto out_put_fw;
+
+	mt9m111->pclk_sample = !!(bus_cfg.bus.parallel.flags &
+				  V4L2_MBUS_PCLK_SAMPLE_RISING);
+
+out_put_fw:
+	fwnode_handle_put(np);
+	return ret;
+}
+
 static int mt9m111_probe(struct i2c_client *client,
 			 const struct i2c_device_id *did)
 {
@@ -1173,6 +1211,10 @@ static int mt9m111_probe(struct i2c_client *client,
 	if (!mt9m111)
 		return -ENOMEM;
 
+	ret = mt9m111_probe_fw(client, mt9m111);
+	if (ret)
+		return ret;
+
 	mt9m111->clk = v4l2_clk_get(&client->dev, "mclk");
 	if (IS_ERR(mt9m111->clk))
 		return PTR_ERR(mt9m111->clk);