serial: Move asm-sh/sci.h to linux/serial_sci.h.

This header is needed on other architectures as well (namely h8300),
which currently fails to build without this in place. Rather than
duplicating the port definition completely there, just move this to a
common location instead.

This should get h8300 working again for 2.6.25, in addition to the
changes already pushed by Sato-san in -rc2.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>

arch/sh/kernel/cpu/sh2/setup-sh7619.c

@@ -10,7 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 enum {
 	UNUSED = 0,

arch/sh/kernel/cpu/sh2a/setup-sh7203.c

@@ -10,7 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 enum {
 	UNUSED = 0,

arch/sh/kernel/cpu/sh2a/setup-sh7206.c

@@ -10,7 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 enum {
 	UNUSED = 0,

arch/sh/kernel/cpu/sh3/setup-sh7705.c

@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 #include <asm/rtc.h>
 
 enum {

arch/sh/kernel/cpu/sh3/setup-sh770x.c

@@ -16,7 +16,7 @@
 #include <linux/irq.h>
 #include <linux/platform_device.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 enum {
 	UNUSED = 0,

arch/sh/kernel/cpu/sh3/setup-sh7710.c

@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 #include <asm/rtc.h>
 
 enum {

arch/sh/kernel/cpu/sh3/setup-sh7720.c

@@ -16,7 +16,7 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/io.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 #include <asm/rtc.h>
 
 #define INTC_ICR1	0xA4140010UL

arch/sh/kernel/cpu/sh4/setup-sh4-202.c

@@ -10,7 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 static struct plat_sci_port sci_platform_data[] = {
 	{

arch/sh/kernel/cpu/sh4/setup-sh7750.c

@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/io.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 static struct resource rtc_resources[] = {
 	[0] = {

arch/sh/kernel/cpu/sh4/setup-sh7760.c

@@ -10,7 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 enum {
 	UNUSED = 0,

arch/sh/kernel/cpu/sh4a/setup-sh7343.c

@@ -10,7 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 static struct plat_sci_port sci_platform_data[] = {
 	{

arch/sh/kernel/cpu/sh4a/setup-sh7366.c

@@ -12,7 +12,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 static struct plat_sci_port sci_platform_data[] = {
 	{

arch/sh/kernel/cpu/sh4a/setup-sh7722.c

@@ -10,9 +10,9 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
+#include <linux/serial_sci.h>
 #include <linux/mm.h>
 #include <asm/mmzone.h>
-#include <asm/sci.h>
 
 static struct resource usbf_resources[] = {
 	[0] = {

arch/sh/kernel/cpu/sh4a/setup-sh7763.c

@@ -12,7 +12,7 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/io.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 static struct resource rtc_resources[] = {
 	[0] = {

arch/sh/kernel/cpu/sh4a/setup-sh7770.c

@@ -10,7 +10,7 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 static struct plat_sci_port sci_platform_data[] = {
 	{

arch/sh/kernel/cpu/sh4a/setup-sh7780.c

@@ -11,7 +11,7 @@
 #include <linux/init.h>
 #include <linux/serial.h>
 #include <linux/io.h>
-#include <asm/sci.h>
+#include <linux/serial_sci.h>
 
 static struct resource rtc_resources[] = {
 	[0] = {

arch/sh/kernel/cpu/sh4a/setup-sh7785.c

@@ -10,10 +10,10 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
+#include <linux/serial_sci.h>
 #include <linux/io.h>
 #include <linux/mm.h>
 #include <asm/mmzone.h>
-#include <asm/sci.h>
 
 static struct plat_sci_port sci_platform_data[] = {
 	{

arch/sh/kernel/cpu/sh4a/setup-shx3.c

@@ -10,9 +10,9 @@
 #include <linux/platform_device.h>
 #include <linux/init.h>
 #include <linux/serial.h>
+#include <linux/serial_sci.h>
 #include <linux/io.h>
 #include <asm/mmzone.h>
-#include <asm/sci.h>
 
 static struct plat_sci_port sci_platform_data[] = {
 	{

drivers/serial/sh-sci.c

@@ -41,6 +41,7 @@
 #include <linux/delay.h>
 #include <linux/console.h>
 #include <linux/platform_device.h>
+#include <linux/serial_sci.h>
 
 #ifdef CONFIG_CPU_FREQ
 #include <linux/notifier.h>
@@ -54,7 +55,6 @@
 #include <asm/kgdb.h>
 #endif
 
-#include <asm/sci.h>
 #include "sh-sci.h"
 
 struct sci_port {

include/linux/serial_sci.h

@@ -1,12 +1,10 @@
-#ifndef __ASM_SH_SCI_H
-#define __ASM_SH_SCI_H
+#ifndef __LINUX_SERIAL_SCI_H
+#define __LINUX_SERIAL_SCI_H
 
 #include <linux/serial_core.h>
 
 /*
- * Generic header for SuperH SCI(F)
- *
- * Do not place SH-specific parts in here, sh64 and h8300 depend on this too.
+ * Generic header for SuperH SCI(F) (used by sh/sh64/h8300 and related parts)
  */
 
 /* Offsets into the sci_port->irqs array */
@@ -31,4 +29,4 @@ struct plat_sci_port {
 
 int early_sci_setup(struct uart_port *port);
 
-#endif /* __ASM_SH_SCI_H */
+#endif /* __LINUX_SERIAL_SCI_H */