hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'raid56-scrub-replace' of git://github.com/miaoxie/linux-btrfs into for-linus

This commit is contained in:
Chris Mason 2014-12-02 18:42:03 -08:00
parent cb83b7b816 5d3edd8f44
commit 9627aeee3e
212 changed files with 2924 additions and 918 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
View File

@ -30,10 +30,6 @@ should only be used when a device has multiple interrupt parents.
Example:
interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
A device node may contain either "interrupts" or "interrupts-extended", but not
both. If both properties are present, then the operating system should log an
error and use only the data in "interrupts".
2) Interrupt controller nodes
-----------------------------

11
Documentation/devicetree/bindings/pci/pci.txt
View File

@ -7,3 +7,14 @@ And for the interrupt mapping part:
Open Firmware Recommended Practice: Interrupt Mapping
http://www.openfirmware.org/1275/practice/imap/imap0_9d.pdf
Additionally to the properties specified in the above standards a host bridge
driver implementation may support the following properties:
- linux,pci-domain:
If present this property assigns a fixed PCI domain number to a host bridge,
otherwise an unstable (across boots) unique number will be assigned.
It is required to either not set this property at all or set it for all
host bridges in the system, otherwise potentially conflicting domain numbers
may be assigned to root buses behind different host bridges. The domain
number for each host bridge in the system must be unique.

2
Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt
View File

@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
TZ1090-PDC's pin configuration nodes act as a container for an abitrary number
TZ1090-PDC's pin configuration nodes act as a container for an arbitrary number
of subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration

2
Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt
View File

@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
TZ1090's pin configuration nodes act as a container for an abitrary number of
TZ1090's pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration

2
Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt
View File

@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
Lantiq's pin configuration nodes act as a container for an abitrary number of
Lantiq's pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those group(s), and two pin configuration parameters:

2
Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt
View File

@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
Lantiq's pin configuration nodes act as a container for an abitrary number of
Lantiq's pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those group(s), and two pin configuration parameters:

2
Documentation/devicetree/bindings/pinctrl/nvidia,tegra20-pinmux.txt
View File

@ -9,7 +9,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
Tegra's pin configuration nodes act as a container for an abitrary number of
Tegra's pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration

2
Documentation/devicetree/bindings/pinctrl/pinctrl-sirf.txt
View File

@ -13,7 +13,7 @@ Optional properties:
Please refer to pinctrl-bindings.txt in this directory for details of the common
pinctrl bindings used by client devices.
SiRFprimaII's pinmux nodes act as a container for an abitrary number of subnodes.
SiRFprimaII's pinmux nodes act as a container for an arbitrary number of subnodes.
Each of these subnodes represents some desired configuration for a group of pins.
Required subnode-properties:

2
Documentation/devicetree/bindings/pinctrl/pinctrl_spear.txt
View File

@ -32,7 +32,7 @@ Required properties:
Please refer to pinctrl-bindings.txt in this directory for details of the common
pinctrl bindings used by client devices.
SPEAr's pinmux nodes act as a container for an abitrary number of subnodes. Each
SPEAr's pinmux nodes act as a container for an arbitrary number of subnodes. Each
of these subnodes represents muxing for a pin, a group, or a list of pins or
groups.

2
Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt
View File

@ -18,7 +18,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
Qualcomm's pin configuration nodes act as a container for an abitrary number of
Qualcomm's pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration

2
Documentation/devicetree/bindings/pinctrl/qcom,apq8084-pinctrl.txt
View File

@ -47,7 +47,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
The pin configuration nodes act as a container for an abitrary number of
The pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration

2
Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt
View File

@ -18,7 +18,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
Qualcomm's pin configuration nodes act as a container for an abitrary number of
Qualcomm's pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration

2
Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt
View File

@ -47,7 +47,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
The pin configuration nodes act as a container for an abitrary number of
The pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration

2
Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt
View File

@ -18,7 +18,7 @@ Please refer to pinctrl-bindings.txt in this directory for details of the
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
Qualcomm's pin configuration nodes act as a container for an abitrary number of
Qualcomm's pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration

5
Documentation/devicetree/bindings/vendor-prefixes.txt
View File

@ -34,6 +34,7 @@ chipidea Chipidea, Inc
chrp Common Hardware Reference Platform
chunghwa Chunghwa Picture Tubes Ltd.
cirrus Cirrus Logic, Inc.
cnm Chips&Media, Inc.
cortina Cortina Systems, Inc.
crystalfontz Crystalfontz America, Inc.
dallas Maxim Integrated Products (formerly Dallas Semiconductor)
@ -92,6 +93,7 @@ maxim Maxim Integrated Products
mediatek MediaTek Inc.
micrel Micrel Inc.
microchip Microchip Technology Inc.
micron Micron Technology Inc.
mitsubishi Mitsubishi Electric Corporation
mosaixtech Mosaix Technologies, Inc.
moxa Moxa
@ -127,6 +129,7 @@ renesas Renesas Electronics Corporation
ricoh Ricoh Co. Ltd.
rockchip Fuzhou Rockchip Electronics Co., Ltd
samsung Samsung Semiconductor
sandisk Sandisk Corporation
sbs Smart Battery System
schindler Schindler
seagate Seagate Technology PLC
@ -138,7 +141,7 @@ silergy Silergy Corp.
sirf SiRF Technology, Inc.
sitronix Sitronix Technology Corporation
smsc Standard Microsystems Corporation
snps Synopsys, Inc.
snps Synopsys, Inc.
solidrun SolidRun
sony Sony Corporation
spansion Spansion Inc.

2
Documentation/filesystems/overlayfs.txt
View File

@ -64,7 +64,7 @@ is formed.
At mount time, the two directories given as mount options "lowerdir" and
"upperdir" are combined into a merged directory:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper,\
mount -t overlay overlay -olowerdir=/lower,upperdir=/upper,\
workdir=/work /merged
The "workdir" needs to be an empty directory on the same filesystem

7
MAINTAINERS
View File

@ -6888,11 +6888,12 @@ F: drivers/scsi/osd/
F: include/scsi/osd_*
F: fs/exofs/
OVERLAYFS FILESYSTEM
OVERLAY FILESYSTEM
M: Miklos Szeredi <miklos@szeredi.hu>
L: linux-fsdevel@vger.kernel.org
L: linux-unionfs@vger.kernel.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs.git
S: Supported
F: fs/overlayfs/*
F: fs/overlayfs/
F: Documentation/filesystems/overlayfs.txt
P54 WIRELESS DRIVER

2
Makefile
View File

@ -1,7 +1,7 @@
VERSION = 3
PATCHLEVEL = 18
SUBLEVEL = 0
EXTRAVERSION = -rc5
EXTRAVERSION = -rc6
NAME = Diseased Newt
# *DOCUMENTATION*

2
arch/arm/boot/dts/r8a7740.dtsi
View File

@ -433,7 +433,7 @@
clocks = <&cpg_clocks R8A7740_CLK_S>,
<&cpg_clocks R8A7740_CLK_S>, <&sub_clk>,
<&cpg_clocks R8A7740_CLK_B>,
<&sub_clk>, <&sub_clk>,
<&cpg_clocks R8A7740_CLK_HPP>, <&sub_clk>,
<&cpg_clocks R8A7740_CLK_B>;
#clock-cells = <1>;
renesas,clock-indices = <

4
arch/arm/boot/dts/r8a7790.dtsi
View File

@ -666,9 +666,9 @@
#clock-cells = <0>;
clock-output-names = "sd2";
};
sd3_clk: sd3_clk@e615007c {
sd3_clk: sd3_clk@e615026c {
compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
reg = <0 0xe615007c 0 4>;
reg = <0 0xe615026c 0 4>;
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
clock-output-names = "sd3";

4
arch/arm/boot/dts/sun6i-a31.dtsi
View File

@ -361,6 +361,10 @@
clocks = <&ahb1_gates 6>;
resets = <&ahb1_rst 6>;
#dma-cells = <1>;
/* DMA controller requires AHB1 clocked from PLL6 */
assigned-clocks = <&ahb1_mux>;
assigned-clock-parents = <&pll6>;
};
mmc0: mmc@01c0f000 {

1
arch/arm/boot/dts/tegra114-dalmore.dts
View File

@ -15,6 +15,7 @@
aliases {
rtc0 = "/i2c@7000d000/tps65913@58";
rtc1 = "/rtc@7000e000";
serial0 = &uartd;
};
memory {

9
arch/arm/boot/dts/tegra114-roth.dts
View File

@ -15,6 +15,10 @@
linux,initrd-end = <0x82800000>;
};
aliases {
serial0 = &uartd;
};
firmware {
trusted-foundations {
compatible = "tlm,trusted-foundations";
@ -916,8 +920,6 @@
regulator-name = "vddio-sdmmc3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
ldousb {
@ -962,7 +964,7 @@
sdhci@78000400 {
status = "okay";
bus-width = <4>;
vmmc-supply = <&vddio_sdmmc3>;
vqmmc-supply = <&vddio_sdmmc3>;
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
};
@ -971,7 +973,6 @@
sdhci@78000600 {
status = "okay";
bus-width = <8>;
vmmc-supply = <&vdd_1v8>;
non-removable;
};

5
arch/arm/boot/dts/tegra114-tn7.dts
View File

@ -15,6 +15,10 @@
linux,initrd-end = <0x82800000>;
};
aliases {
serial0 = &uartd;
};
firmware {
trusted-foundations {
compatible = "tlm,trusted-foundations";
@ -240,7 +244,6 @@
sdhci@78000600 {
status = "okay";
bus-width = <8>;
vmmc-supply = <&vdd_1v8>;
non-removable;
};

7
arch/arm/boot/dts/tegra114.dtsi
View File

@ -9,13 +9,6 @@
compatible = "nvidia,tegra114";
interrupt-parent = <&gic>;
aliases {
serial0 = &uarta;
serial1 = &uartb;
serial2 = &uartc;
serial3 = &uartd;
};
host1x@50000000 {
compatible = "nvidia,tegra114-host1x", "simple-bus";
reg = <0x50000000 0x00028000>;

1
arch/arm/boot/dts/tegra124-jetson-tk1.dts
View File

@ -10,6 +10,7 @@
aliases {
rtc0 = "/i2c@0,7000d000/pmic@40";
rtc1 = "/rtc@0,7000e000";
serial0 = &uartd;
};
memory {

1
arch/arm/boot/dts/tegra124-nyan-big.dts
View File

@ -10,6 +10,7 @@
aliases {
rtc0 = "/i2c@0,7000d000/pmic@40";
rtc1 = "/rtc@0,7000e000";
serial0 = &uarta;
};
memory {

1
arch/arm/boot/dts/tegra124-venice2.dts
View File

@ -10,6 +10,7 @@
aliases {
rtc0 = "/i2c@0,7000d000/pmic@40";
rtc1 = "/rtc@0,7000e000";
serial0 = &uarta;
};
memory {

8
arch/arm/boot/dts/tegra124.dtsi
View File

@ -286,7 +286,7 @@
* the APB DMA based serial driver, the comptible is
* "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
*/
serial@0,70006000 {
uarta: serial@0,70006000 {
compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
reg = <0x0 0x70006000 0x0 0x40>;
reg-shift = <2>;
@ -299,7 +299,7 @@
status = "disabled";
};
serial@0,70006040 {
uartb: serial@0,70006040 {
compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
reg = <0x0 0x70006040 0x0 0x40>;
reg-shift = <2>;
@ -312,7 +312,7 @@
status = "disabled";
};
serial@0,70006200 {
uartc: serial@0,70006200 {
compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
reg = <0x0 0x70006200 0x0 0x40>;
reg-shift = <2>;
@ -325,7 +325,7 @@
status = "disabled";
};
serial@0,70006300 {
uartd: serial@0,70006300 {
compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
reg = <0x0 0x70006300 0x0 0x40>;
reg-shift = <2>;

1
arch/arm/boot/dts/tegra20-harmony.dts
View File

@ -10,6 +10,7 @@
aliases {
rtc0 = "/i2c@7000d000/tps6586x@34";
rtc1 = "/rtc@7000e000";
serial0 = &uartd;
};
memory {

5
arch/arm/boot/dts/tegra20-iris-512.dts
View File

@ -6,6 +6,11 @@
model = "Toradex Colibri T20 512MB on Iris";
compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20";
aliases {
serial0 = &uarta;
serial1 = &uartd;
};
host1x@50000000 {
hdmi@54280000 {
status = "okay";

4
arch/arm/boot/dts/tegra20-medcom-wide.dts
View File

@ -6,6 +6,10 @@
model = "Avionic Design Medcom-Wide board";
compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
aliases {
serial0 = &uartd;
};
pwm@7000a000 {
status = "okay";
};

2
arch/arm/boot/dts/tegra20-paz00.dts
View File

@ -10,6 +10,8 @@
aliases {
rtc0 = "/i2c@7000d000/tps6586x@34";
rtc1 = "/rtc@7000e000";
serial0 = &uarta;
serial1 = &uartc;
};
memory {

1
arch/arm/boot/dts/tegra20-seaboard.dts
View File

@ -10,6 +10,7 @@
aliases {
rtc0 = "/i2c@7000d000/tps6586x@34";
rtc1 = "/rtc@7000e000";
serial0 = &uartd;
};
memory {

1
arch/arm/boot/dts/tegra20-tamonten.dtsi
View File

@ -7,6 +7,7 @@
aliases {
rtc0 = "/i2c@7000d000/tps6586x@34";
rtc1 = "/rtc@7000e000";
serial0 = &uartd;
};
memory {

1
arch/arm/boot/dts/tegra20-trimslice.dts
View File

@ -10,6 +10,7 @@
aliases {
rtc0 = "/i2c@7000c500/rtc@56";
rtc1 = "/rtc@7000e000";
serial0 = &uarta;
};
memory {

1
arch/arm/boot/dts/tegra20-ventana.dts
View File

@ -10,6 +10,7 @@
aliases {
rtc0 = "/i2c@7000d000/tps6586x@34";
rtc1 = "/rtc@7000e000";
serial0 = &uartd;
};
memory {

1
arch/arm/boot/dts/tegra20-whistler.dts
View File

@ -10,6 +10,7 @@
aliases {
rtc0 = "/i2c@7000d000/max8907@3c";
rtc1 = "/rtc@7000e000";
serial0 = &uarta;
};
memory {

8
arch/arm/boot/dts/tegra20.dtsi
View File

@ -9,14 +9,6 @@
compatible = "nvidia,tegra20";
interrupt-parent = <&intc>;
aliases {
serial0 = &uarta;
serial1 = &uartb;
serial2 = &uartc;
serial3 = &uartd;
serial4 = &uarte;
};
host1x@50000000 {
compatible = "nvidia,tegra20-host1x", "simple-bus";
reg = <0x50000000 0x00024000>;

4
arch/arm/boot/dts/tegra30-apalis-eval.dts
View File

@ -11,6 +11,10 @@
rtc0 = "/i2c@7000c000/rtc@68";
rtc1 = "/i2c@7000d000/tps65911@2d";
rtc2 = "/rtc@7000e000";
serial0 = &uarta;
serial1 = &uartb;
serial2 = &uartc;
serial3 = &uartd;
};
pcie-controller@00003000 {

1
arch/arm/boot/dts/tegra30-beaver.dts
View File

@ -9,6 +9,7 @@
aliases {
rtc0 = "/i2c@7000d000/tps65911@2d";
rtc1 = "/rtc@7000e000";
serial0 = &uarta;
};
memory {

2
arch/arm/boot/dts/tegra30-cardhu.dtsi
View File

@ -30,6 +30,8 @@
aliases {
rtc0 = "/i2c@7000d000/tps65911@2d";
rtc1 = "/rtc@7000e000";
serial0 = &uarta;
serial1 = &uartc;
};
memory {

3
arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
View File

@ -10,6 +10,9 @@
rtc0 = "/i2c@7000c000/rtc@68";
rtc1 = "/i2c@7000d000/tps65911@2d";
rtc2 = "/rtc@7000e000";
serial0 = &uarta;
serial1 = &uartb;
serial2 = &uartd;
};
host1x@50000000 {

8
arch/arm/boot/dts/tegra30.dtsi
View File

@ -9,14 +9,6 @@
compatible = "nvidia,tegra30";
interrupt-parent = <&intc>;
aliases {
serial0 = &uarta;
serial1 = &uartb;
serial2 = &uartc;
serial3 = &uartd;
serial4 = &uarte;
};
pcie-controller@00003000 {
compatible = "nvidia,tegra30-pcie";
device_type = "pci";

1
arch/arm/configs/multi_v7_defconfig
View File

@ -217,6 +217,7 @@ CONFIG_I2C_CADENCE=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_MV64XXX=y
CONFIG_I2C_S3C2410=y
CONFIG_I2C_SIRF=y
CONFIG_I2C_TEGRA=y
CONFIG_I2C_ST=y

9
arch/arm/mach-shmobile/clock-r8a7740.c
View File

@ -455,7 +455,7 @@ enum {
MSTP128, MSTP127, MSTP125,
MSTP116, MSTP111, MSTP100, MSTP117,
MSTP230,
MSTP230, MSTP229,
MSTP222,
MSTP218, MSTP217, MSTP216, MSTP214,
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
@ -474,11 +474,12 @@ static struct clk mstp_clks[MSTP_NR] = {
[MSTP127] = SH_CLK_MSTP32(&div4_clks[DIV4_S], SMSTPCR1, 27, 0), /* CEU20 */
[MSTP125] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
[MSTP117] = SH_CLK_MSTP32(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */
[MSTP116] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
[MSTP116] = SH_CLK_MSTP32(&div4_clks[DIV4_HPP], SMSTPCR1, 16, 0), /* IIC0 */
[MSTP111] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 11, 0), /* TMU1 */
[MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
[MSTP230] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 30, 0), /* SCIFA6 */
[MSTP229] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 29, 0), /* INTCA */
[MSTP222] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 22, 0), /* SCIFA7 */
[MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */
[MSTP217] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */
@ -575,6 +576,10 @@ static struct clk_lookup lookups[] = {
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]),
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP222]),
CLKDEV_DEV_ID("e6cd0000.serial", &mstp_clks[MSTP222]),
CLKDEV_DEV_ID("renesas_intc_irqpin.0", &mstp_clks[MSTP229]),
CLKDEV_DEV_ID("renesas_intc_irqpin.1", &mstp_clks[MSTP229]),
CLKDEV_DEV_ID("renesas_intc_irqpin.2", &mstp_clks[MSTP229]),
CLKDEV_DEV_ID("renesas_intc_irqpin.3", &mstp_clks[MSTP229]),
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]),
CLKDEV_DEV_ID("e6cc0000.serial", &mstp_clks[MSTP230]),

2
arch/arm/mach-shmobile/clock-r8a7790.c
View File

@ -68,7 +68,7 @@
#define SDCKCR 0xE6150074
#define SD2CKCR 0xE6150078
#define SD3CKCR 0xE615007C
#define SD3CKCR 0xE615026C
#define MMC0CKCR 0xE6150240
#define MMC1CKCR 0xE6150244
#define SSPCKCR 0xE6150248

20
arch/arm/mach-shmobile/setup-sh73a0.c
View File

@ -26,6 +26,7 @@
#include <linux/of_platform.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/i2c/i2c-sh_mobile.h>
#include <linux/io.h>
#include <linux/serial_sci.h>
#include <linux/sh_dma.h>
@ -192,11 +193,18 @@ static struct resource i2c4_resources[] = {
},
};
static struct i2c_sh_mobile_platform_data i2c_platform_data = {
.clks_per_count = 2,
};
static struct platform_device i2c0_device = {
.name = "i2c-sh_mobile",
.id = 0,
.resource = i2c0_resources,
.num_resources = ARRAY_SIZE(i2c0_resources),
.dev = {
.platform_data = &i2c_platform_data,
},
};
static struct platform_device i2c1_device = {
@ -204,6 +212,9 @@ static struct platform_device i2c1_device = {
.id = 1,
.resource = i2c1_resources,
.num_resources = ARRAY_SIZE(i2c1_resources),
.dev = {
.platform_data = &i2c_platform_data,
},
};
static struct platform_device i2c2_device = {
@ -211,6 +222,9 @@ static struct platform_device i2c2_device = {
.id = 2,
.resource = i2c2_resources,
.num_resources = ARRAY_SIZE(i2c2_resources),
.dev = {
.platform_data = &i2c_platform_data,
},
};
static struct platform_device i2c3_device = {
@ -218,6 +232,9 @@ static struct platform_device i2c3_device = {
.id = 3,
.resource = i2c3_resources,
.num_resources = ARRAY_SIZE(i2c3_resources),
.dev = {
.platform_data = &i2c_platform_data,
},
};
static struct platform_device i2c4_device = {
@ -225,6 +242,9 @@ static struct platform_device i2c4_device = {
.id = 4,
.resource = i2c4_resources,
.num_resources = ARRAY_SIZE(i2c4_resources),
.dev = {
.platform_data = &i2c_platform_data,
},
};
static const struct sh_dmae_slave_config sh73a0_dmae_slaves[] = {

8
arch/mips/include/asm/jump_label.h
View File

@ -20,9 +20,15 @@
#define WORD_INSN ".word"
#endif
#ifdef CONFIG_CPU_MICROMIPS
#define NOP_INSN "nop32"
#else
#define NOP_INSN "nop"
#endif
static __always_inline bool arch_static_branch(struct static_key *key)
{
asm_volatile_goto("1:\tnop\n\t"
asm_volatile_goto("1:\t" NOP_INSN "\n\t"
"nop\n\t"
".pushsection __jump_table, \"aw\"\n\t"
WORD_INSN " 1b, %l[l_yes], %0\n\t"

2
arch/mips/include/asm/mach-loongson/cpu-feature-overrides.h
View File

@ -41,10 +41,8 @@
#define cpu_has_mcheck 0
#define cpu_has_mdmx 0
#define cpu_has_mips16 0
#define cpu_has_mips32r1 0
#define cpu_has_mips32r2 0
#define cpu_has_mips3d 0
#define cpu_has_mips64r1 0
#define cpu_has_mips64r2 0
#define cpu_has_mipsmt 0
#define cpu_has_prefetch 0

12
arch/mips/include/asm/uaccess.h
View File

@ -301,7 +301,8 @@ do { \
__get_kernel_common((x), size, __gu_ptr); \
else \
__get_user_common((x), size, __gu_ptr); \
} \
} else \
(x) = 0; \
\
__gu_err; \
})
@ -316,6 +317,7 @@ do { \
" .insn \n" \
" .section .fixup,\"ax\" \n" \
"3: li %0, %4 \n" \
" move %1, $0 \n" \
" j 2b \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
@ -630,6 +632,7 @@ do { \
" .insn \n" \
" .section .fixup,\"ax\" \n" \
"3: li %0, %4 \n" \
" move %1, $0 \n" \
" j 2b \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
@ -773,10 +776,11 @@ extern void __put_user_unaligned_unknown(void);
"jal\t" #destination "\n\t"
#endif
#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
#define DADDI_SCRATCH "$0"
#else
#if defined(CONFIG_CPU_DADDI_WORKAROUNDS) || (defined(CONFIG_EVA) && \
defined(CONFIG_CPU_HAS_PREFETCH))
#define DADDI_SCRATCH "$3"
#else
#define DADDI_SCRATCH "$0"
#endif
extern size_t __copy_user(void *__to, const void *__from, size_t __n);

7
arch/mips/kernel/cpu-probe.c
View File

@ -757,31 +757,34 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
c->cputype = CPU_LOONGSON2;
__cpu_name[cpu] = "ICT Loongson-2";
set_elf_platform(cpu, "loongson2e");
set_isa(c, MIPS_CPU_ISA_III);
break;
case PRID_REV_LOONGSON2F:
c->cputype = CPU_LOONGSON2;
__cpu_name[cpu] = "ICT Loongson-2";
set_elf_platform(cpu, "loongson2f");
set_isa(c, MIPS_CPU_ISA_III);
break;
case PRID_REV_LOONGSON3A:
c->cputype = CPU_LOONGSON3;
c->writecombine = _CACHE_UNCACHED_ACCELERATED;
__cpu_name[cpu] = "ICT Loongson-3";
set_elf_platform(cpu, "loongson3a");
set_isa(c, MIPS_CPU_ISA_M64R1);
break;
case PRID_REV_LOONGSON3B_R1:
case PRID_REV_LOONGSON3B_R2:
c->cputype = CPU_LOONGSON3;
__cpu_name[cpu] = "ICT Loongson-3";
set_elf_platform(cpu, "loongson3b");
set_isa(c, MIPS_CPU_ISA_M64R1);
break;
}
set_isa(c, MIPS_CPU_ISA_III);
c->options = R4K_OPTS |
MIPS_CPU_FPU | MIPS_CPU_LLSC |
MIPS_CPU_32FPR;
c->tlbsize = 64;
c->writecombine = _CACHE_UNCACHED_ACCELERATED;
break;
case PRID_IMP_LOONGSON_32: /* Loongson-1 */
decode_configs(c);

42
arch/mips/kernel/jump_label.c
View File

@ -18,31 +18,53 @@
#ifdef HAVE_JUMP_LABEL
#define J_RANGE_MASK ((1ul << 28) - 1)
/*
* Define parameters for the standard MIPS and the microMIPS jump
* instruction encoding respectively:
*
* - the ISA bit of the target, either 0 or 1 respectively,
*
* - the amount the jump target address is shifted right to fit in the
* immediate field of the machine instruction, either 2 or 1,
*
* - the mask determining the size of the jump region relative to the
* delay-slot instruction, either 256MB or 128MB,
*
* - the jump target alignment, either 4 or 2 bytes.
*/
#define J_ISA_BIT IS_ENABLED(CONFIG_CPU_MICROMIPS)
#define J_RANGE_SHIFT (2 - J_ISA_BIT)
#define J_RANGE_MASK ((1ul << (26 + J_RANGE_SHIFT)) - 1)
#define J_ALIGN_MASK ((1ul << J_RANGE_SHIFT) - 1)
void arch_jump_label_transform(struct jump_entry *e,
enum jump_label_type type)
{
union mips_instruction *insn_p;
union mips_instruction insn;
union mips_instruction *insn_p =
(union mips_instruction *)(unsigned long)e->code;
/* Jump only works within a 256MB aligned region. */
BUG_ON((e->target & ~J_RANGE_MASK) != (e->code & ~J_RANGE_MASK));
insn_p = (union mips_instruction *)msk_isa16_mode(e->code);
/* Target must have 4 byte alignment. */
BUG_ON((e->target & 3) != 0);
/* Jump only works within an aligned region its delay slot is in. */
BUG_ON((e->target & ~J_RANGE_MASK) != ((e->code + 4) & ~J_RANGE_MASK));
/* Target must have the right alignment and ISA must be preserved. */
BUG_ON((e->target & J_ALIGN_MASK) != J_ISA_BIT);
if (type == JUMP_LABEL_ENABLE) {
insn.j_format.opcode = j_op;
insn.j_format.target = (e->target & J_RANGE_MASK) >> 2;
insn.j_format.opcode = J_ISA_BIT ? mm_j32_op : j_op;
insn.j_format.target = e->target >> J_RANGE_SHIFT;
} else {
insn.word = 0; /* nop */
}
get_online_cpus();
mutex_lock(&text_mutex);
*insn_p = insn;
if (IS_ENABLED(CONFIG_CPU_MICROMIPS)) {
insn_p->halfword[0] = insn.word >> 16;
insn_p->halfword[1] = insn.word;
} else
*insn_p = insn;
flush_icache_range((unsigned long)insn_p,
(unsigned long)insn_p + sizeof(*insn_p));

1
arch/mips/lib/memcpy.S
View File

@ -503,6 +503,7 @@
STOREB(t0, NBYTES-2(dst), .Ls_exc_p1\@)
.Ldone\@:
jr ra
nop
.if __memcpy == 1
END(memcpy)
.set __memcpy, 0

1
arch/mips/loongson/loongson-3/numa.c
View File

@ -33,6 +33,7 @@
static struct node_data prealloc__node_data[MAX_NUMNODES];
unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES];
EXPORT_SYMBOL(__node_distances);
struct node_data *__node_data[MAX_NUMNODES];
EXPORT_SYMBOL(__node_data);

4
arch/mips/mm/tlb-r4k.c
View File

@ -299,6 +299,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
local_irq_save(flags);
htw_stop();
pid = read_c0_entryhi() & ASID_MASK;
address &= (PAGE_MASK << 1);
write_c0_entryhi(address | pid);
@ -346,6 +347,7 @@ void __update_tlb(struct vm_area_struct * vma, unsigned long address, pte_t pte)
tlb_write_indexed();
}
tlbw_use_hazard();
htw_start();
flush_itlb_vm(vma);
local_irq_restore(flags);
}
@ -422,6 +424,7 @@ __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
local_irq_save(flags);
/* Save old context and create impossible VPN2 value */
htw_stop();
old_ctx = read_c0_entryhi();
old_pagemask = read_c0_pagemask();
wired = read_c0_wired();
@ -443,6 +446,7 @@ __init int add_temporary_entry(unsigned long entrylo0, unsigned long entrylo1,
write_c0_entryhi(old_ctx);
write_c0_pagemask(old_pagemask);
htw_start();
out:
local_irq_restore(flags);
return ret;

2
arch/mips/oprofile/backtrace.c
View File

@ -92,7 +92,7 @@ static inline int unwind_user_frame(struct stackframe *old_frame,
/* This marks the end of the previous function,
which means we overran. */
break;
stack_size = (unsigned) stack_adjustment;
stack_size = (unsigned long) stack_adjustment;
} else if (is_ra_save_ins(&ip)) {
int ra_slot = ip.i_format.simmediate;
if (ra_slot < 0)

1
arch/mips/sgi-ip27/ip27-memory.c
View File

@ -107,6 +107,7 @@ static void router_recurse(klrou_t *router_a, klrou_t *router_b, int depth)
}
unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
EXPORT_SYMBOL(__node_distances);
static int __init compute_node_distance(nasid_t nasid_a, nasid_t nasid_b)
{

2
arch/powerpc/sysdev/fsl_msi.c
View File

@ -361,7 +361,7 @@ static int fsl_msi_setup_hwirq(struct fsl_msi *msi, struct platform_device *dev,
cascade_data->virq = virt_msir;
msi->cascade_array[irq_index] = cascade_data;
ret = request_irq(virt_msir, fsl_msi_cascade, 0,
ret = request_irq(virt_msir, fsl_msi_cascade, IRQF_NO_THREAD,
"fsl-msi-cascade", cascade_data);
if (ret) {
dev_err(&dev->dev, "failed to request_irq(%d), ret = %d\n",

2
arch/x86/Kconfig
View File

@ -144,7 +144,7 @@ config INSTRUCTION_DECODER
config PERF_EVENTS_INTEL_UNCORE
def_bool y
depends on PERF_EVENTS && SUP_SUP_INTEL && PCI
depends on PERF_EVENTS && CPU_SUP_INTEL && PCI
config OUTPUT_FORMAT
string

1
arch/x86/include/asm/page_32_types.h
View File

@ -20,7 +20,6 @@
#define THREAD_SIZE_ORDER 1
#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
#define STACKFAULT_STACK 0
#define DOUBLEFAULT_STACK 1
#define NMI_STACK 0
#define DEBUG_STACK 0

11
arch/x86/include/asm/page_64_types.h
View File

@ -14,12 +14,11 @@
#define IRQ_STACK_ORDER 2
#define IRQ_STACK_SIZE (PAGE_SIZE << IRQ_STACK_ORDER)
#define STACKFAULT_STACK 1
#define DOUBLEFAULT_STACK 2
#define NMI_STACK 3
#define DEBUG_STACK 4
#define MCE_STACK 5
#define N_EXCEPTION_STACKS 5 /* hw limit: 7 */
#define DOUBLEFAULT_STACK 1
#define NMI_STACK 2
#define DEBUG_STACK 3
#define MCE_STACK 4
#define N_EXCEPTION_STACKS 4 /* hw limit: 7 */
#define PUD_PAGE_SIZE (_AC(1, UL) << PUD_SHIFT)
#define PUD_PAGE_MASK (~(PUD_PAGE_SIZE-1))

2
arch/x86/include/asm/thread_info.h
View File

@ -141,7 +141,7 @@ struct thread_info {
/* Only used for 64 bit */
#define _TIF_DO_NOTIFY_MASK \
(_TIF_SIGPENDING | _TIF_MCE_NOTIFY | _TIF_NOTIFY_RESUME | \
_TIF_USER_RETURN_NOTIFY)
_TIF_USER_RETURN_NOTIFY | _TIF_UPROBE)
/* flags to check in __switch_to() */
#define _TIF_WORK_CTXSW \

1
arch/x86/include/asm/traps.h
View File

@ -39,6 +39,7 @@ asmlinkage void simd_coprocessor_error(void);
#ifdef CONFIG_TRACING
asmlinkage void trace_page_fault(void);
#define trace_stack_segment stack_segment
#define trace_divide_error divide_error
#define trace_bounds bounds
#define trace_invalid_op invalid_op

2
arch/x86/kernel/cpu/common.c
View File

@ -146,6 +146,8 @@ EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
static int __init x86_xsave_setup(char *s)
{
if (strlen(s))
return 0;
setup_clear_cpu_cap(X86_FEATURE_XSAVE);
setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT);
setup_clear_cpu_cap(X86_FEATURE_XSAVES);

8
arch/x86/kernel/cpu/microcode/core.c
View File

@ -465,6 +465,14 @@ static void mc_bp_resume(void)
if (uci->valid && uci->mc)
microcode_ops->apply_microcode(cpu);
else if (!uci->mc)
/*
* We might resume and not have applied late microcode but still
* have a newer patch stashed from the early loader. We don't
* have it in uci->mc so we have to load it the same way we're
* applying patches early on the APs.
*/
load_ucode_ap();
}
static struct syscore_ops mc_syscore_ops = {

49
arch/x86/kernel/cpu/perf_event_intel_uncore_snbep.c
View File

@ -486,14 +486,17 @@ static struct attribute_group snbep_uncore_qpi_format_group = {
.attrs = snbep_uncore_qpi_formats_attr,
};
#define SNBEP_UNCORE_MSR_OPS_COMMON_INIT() \
.init_box = snbep_uncore_msr_init_box, \
#define __SNBEP_UNCORE_MSR_OPS_COMMON_INIT() \
.disable_box = snbep_uncore_msr_disable_box, \
.enable_box = snbep_uncore_msr_enable_box, \
.disable_event = snbep_uncore_msr_disable_event, \
.enable_event = snbep_uncore_msr_enable_event, \
.read_counter = uncore_msr_read_counter
#define SNBEP_UNCORE_MSR_OPS_COMMON_INIT() \
__SNBEP_UNCORE_MSR_OPS_COMMON_INIT(), \
.init_box = snbep_uncore_msr_init_box \
static struct intel_uncore_ops snbep_uncore_msr_ops = {
SNBEP_UNCORE_MSR_OPS_COMMON_INIT(),
};
@ -1919,6 +1922,30 @@ static struct intel_uncore_type hswep_uncore_cbox = {
.format_group = &hswep_uncore_cbox_format_group,
};
/*
* Write SBOX Initialization register bit by bit to avoid spurious #GPs
*/
static void hswep_uncore_sbox_msr_init_box(struct intel_uncore_box *box)
{
unsigned msr = uncore_msr_box_ctl(box);
if (msr) {
u64 init = SNBEP_PMON_BOX_CTL_INT;
u64 flags = 0;
int i;
for_each_set_bit(i, (unsigned long *)&init, 64) {
flags |= (1ULL << i);
wrmsrl(msr, flags);
}
}
}
static struct intel_uncore_ops hswep_uncore_sbox_msr_ops = {
__SNBEP_UNCORE_MSR_OPS_COMMON_INIT(),
.init_box = hswep_uncore_sbox_msr_init_box
};
static struct attribute *hswep_uncore_sbox_formats_attr[] = {
&format_attr_event.attr,
&format_attr_umask.attr,
@ -1944,7 +1971,7 @@ static struct intel_uncore_type hswep_uncore_sbox = {
.event_mask = HSWEP_S_MSR_PMON_RAW_EVENT_MASK,
.box_ctl = HSWEP_S0_MSR_PMON_BOX_CTL,
.msr_offset = HSWEP_SBOX_MSR_OFFSET,
.ops = &snbep_uncore_msr_ops,
.ops = &hswep_uncore_sbox_msr_ops,
.format_group = &hswep_uncore_sbox_format_group,
};
@ -2025,13 +2052,27 @@ static struct intel_uncore_type hswep_uncore_imc = {
SNBEP_UNCORE_PCI_COMMON_INIT(),
};
static unsigned hswep_uncore_irp_ctrs[] = {0xa0, 0xa8, 0xb0, 0xb8};
static u64 hswep_uncore_irp_read_counter(struct intel_uncore_box *box, struct perf_event *event)
{
struct pci_dev *pdev = box->pci_dev;
struct hw_perf_event *hwc = &event->hw;
u64 count = 0;
pci_read_config_dword(pdev, hswep_uncore_irp_ctrs[hwc->idx], (u32 *)&count);
pci_read_config_dword(pdev, hswep_uncore_irp_ctrs[hwc->idx] + 4, (u32 *)&count + 1);
return count;
}
static struct intel_uncore_ops hswep_uncore_irp_ops = {
.init_box = snbep_uncore_pci_init_box,
.disable_box = snbep_uncore_pci_disable_box,
.enable_box = snbep_uncore_pci_enable_box,
.disable_event = ivbep_uncore_irp_disable_event,
.enable_event = ivbep_uncore_irp_enable_event,
.read_counter = ivbep_uncore_irp_read_counter,
.read_counter = hswep_uncore_irp_read_counter,
};
static struct intel_uncore_type hswep_uncore_irp = {

1
arch/x86/kernel/dumpstack_64.c
View File

@ -24,7 +24,6 @@ static char x86_stack_ids[][8] = {
[ DEBUG_STACK-1 ] = "#DB",
[ NMI_STACK-1 ] = "NMI",
[ DOUBLEFAULT_STACK-1 ] = "#DF",
[ STACKFAULT_STACK-1 ] = "#SS",
[ MCE_STACK-1 ] = "#MC",
#if DEBUG_STKSZ > EXCEPTION_STKSZ
[ N_EXCEPTION_STACKS ...

81
arch/x86/kernel/entry_64.S
View File

@ -828,9 +828,15 @@ ENTRY(native_iret)
jnz native_irq_return_ldt
#endif
.global native_irq_return_iret
native_irq_return_iret:
/*
* This may fault. Non-paranoid faults on return to userspace are
* handled by fixup_bad_iret. These include #SS, #GP, and #NP.
* Double-faults due to espfix64 are handled in do_double_fault.
* Other faults here are fatal.
*/
iretq
_ASM_EXTABLE(native_irq_return_iret, bad_iret)
#ifdef CONFIG_X86_ESPFIX64
native_irq_return_ldt:
@ -858,25 +864,6 @@ native_irq_return_ldt:
jmp native_irq_return_iret
#endif
.section .fixup,"ax"
bad_iret:
/*
* The iret traps when the %cs or %ss being restored is bogus.
* We've lost the original trap vector and error code.
* #GPF is the most likely one to get for an invalid selector.
* So pretend we completed the iret and took the #GPF in user mode.
*
* We are now running with the kernel GS after exception recovery.
* But error_entry expects us to have user GS to match the user %cs,
* so swap back.
*/
pushq $0
SWAPGS
jmp general_protection
.previous
/* edi: workmask, edx: work */
retint_careful:
CFI_RESTORE_STATE
@ -922,37 +909,6 @@ ENTRY(retint_kernel)
CFI_ENDPROC
END(common_interrupt)
/*
* If IRET takes a fault on the espfix stack, then we
* end up promoting it to a doublefault. In that case,
* modify the stack to make it look like we just entered
* the #GP handler from user space, similar to bad_iret.
*/
#ifdef CONFIG_X86_ESPFIX64
ALIGN
__do_double_fault:
XCPT_FRAME 1 RDI+8
movq RSP(%rdi),%rax /* Trap on the espfix stack? */
sarq $PGDIR_SHIFT,%rax
cmpl $ESPFIX_PGD_ENTRY,%eax
jne do_double_fault /* No, just deliver the fault */
cmpl $__KERNEL_CS,CS(%rdi)
jne do_double_fault
movq RIP(%rdi),%rax
cmpq $native_irq_return_iret,%rax
jne do_double_fault /* This shouldn't happen... */
movq PER_CPU_VAR(kernel_stack),%rax
subq $(6*8-KERNEL_STACK_OFFSET),%rax /* Reset to original stack */
movq %rax,RSP(%rdi)
movq $0,(%rax) /* Missing (lost) #GP error code */
movq $general_protection,RIP(%rdi)
retq
CFI_ENDPROC
END(__do_double_fault)
#else
# define __do_double_fault do_double_fault
#endif
/*
* APIC interrupts.
*/
@ -1124,7 +1080,7 @@ idtentry overflow do_overflow has_error_code=0
idtentry bounds do_bounds has_error_code=0
idtentry invalid_op do_invalid_op has_error_code=0
idtentry device_not_available do_device_not_available has_error_code=0
idtentry double_fault __do_double_fault has_error_code=1 paranoid=1
idtentry double_fault do_double_fault has_error_code=1 paranoid=1
idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0
idtentry invalid_TSS do_invalid_TSS has_error_code=1
idtentry segment_not_present do_segment_not_present has_error_code=1
@ -1289,7 +1245,7 @@ apicinterrupt3 HYPERVISOR_CALLBACK_VECTOR \
idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
idtentry stack_segment do_stack_segment has_error_code=1 paranoid=1
idtentry stack_segment do_stack_segment has_error_code=1
#ifdef CONFIG_XEN
idtentry xen_debug do_debug has_error_code=0
idtentry xen_int3 do_int3 has_error_code=0
@ -1399,17 +1355,16 @@ error_sti:
/*
* There are two places in the kernel that can potentially fault with
* usergs. Handle them here. The exception handlers after iret run with
* kernel gs again, so don't set the user space flag. B stepping K8s
* sometimes report an truncated RIP for IRET exceptions returning to
* compat mode. Check for these here too.
* usergs. Handle them here. B stepping K8s sometimes report a
* truncated RIP for IRET exceptions returning to compat mode. Check
* for these here too.
*/
error_kernelspace:
CFI_REL_OFFSET rcx, RCX+8
incl %ebx
leaq native_irq_return_iret(%rip),%rcx
cmpq %rcx,RIP+8(%rsp)
je error_swapgs
je error_bad_iret
movl %ecx,%eax /* zero extend */
cmpq %rax,RIP+8(%rsp)
je bstep_iret
@ -1420,7 +1375,15 @@ error_kernelspace:
bstep_iret:
/* Fix truncated RIP */
movq %rcx,RIP+8(%rsp)
jmp error_swapgs
/* fall through */
error_bad_iret:
SWAPGS
mov %rsp,%rdi
call fixup_bad_iret
mov %rax,%rsp
decl %ebx /* Return to usergs */
jmp error_sti
CFI_ENDPROC
END(error_entry)

2
arch/x86/kernel/ptrace.c
View File

@ -1484,7 +1484,7 @@ unsigned long syscall_trace_enter_phase1(struct pt_regs *regs, u32 arch)
*/
if (work & _TIF_NOHZ) {
user_exit();
work &= ~TIF_NOHZ;
work &= ~_TIF_NOHZ;
}
#ifdef CONFIG_SECCOMP

71
arch/x86/kernel/traps.c
View File

@ -233,32 +233,40 @@ DO_ERROR(X86_TRAP_UD, SIGILL, "invalid opcode", invalid_op)
DO_ERROR(X86_TRAP_OLD_MF, SIGFPE, "coprocessor segment overrun",coprocessor_segment_overrun)
DO_ERROR(X86_TRAP_TS, SIGSEGV, "invalid TSS", invalid_TSS)
DO_ERROR(X86_TRAP_NP, SIGBUS, "segment not present", segment_not_present)
#ifdef CONFIG_X86_32
DO_ERROR(X86_TRAP_SS, SIGBUS, "stack segment", stack_segment)
#endif
DO_ERROR(X86_TRAP_AC, SIGBUS, "alignment check", alignment_check)
#ifdef CONFIG_X86_64
/* Runs on IST stack */
dotraplinkage void do_stack_segment(struct pt_regs *regs, long error_code)
{
enum ctx_state prev_state;
prev_state = exception_enter();
if (notify_die(DIE_TRAP, "stack segment", regs, error_code,
X86_TRAP_SS, SIGBUS) != NOTIFY_STOP) {
preempt_conditional_sti(regs);
do_trap(X86_TRAP_SS, SIGBUS, "stack segment", regs, error_code, NULL);
preempt_conditional_cli(regs);
}
exception_exit(prev_state);
}
dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
{
static const char str[] = "double fault";
struct task_struct *tsk = current;
#ifdef CONFIG_X86_ESPFIX64
extern unsigned char native_irq_return_iret[];
/*
* If IRET takes a non-IST fault on the espfix64 stack, then we
* end up promoting it to a doublefault. In that case, modify
* the stack to make it look like we just entered the #GP
* handler from user space, similar to bad_iret.
*/
if (((long)regs->sp >> PGDIR_SHIFT) == ESPFIX_PGD_ENTRY &&
regs->cs == __KERNEL_CS &&
regs->ip == (unsigned long)native_irq_return_iret)
{
struct pt_regs *normal_regs = task_pt_regs(current);
/* Fake a #GP(0) from userspace. */
memmove(&normal_regs->ip, (void *)regs->sp, 5*8);
normal_regs->orig_ax = 0; /* Missing (lost) #GP error code */
regs->ip = (unsigned long)general_protection;
regs->sp = (unsigned long)&normal_regs->orig_ax;
return;
}
#endif
exception_enter();
/* Return not checked because double check cannot be ignored */
notify_die(DIE_TRAP, str, regs, error_code, X86_TRAP_DF, SIGSEGV);
@ -399,6 +407,35 @@ asmlinkage __visible struct pt_regs *sync_regs(struct pt_regs *eregs)
return regs;
}
NOKPROBE_SYMBOL(sync_regs);
struct bad_iret_stack {
void *error_entry_ret;
struct pt_regs regs;
};
asmlinkage __visible
struct bad_iret_stack *fixup_bad_iret(struct bad_iret_stack *s)
{
/*
* This is called from entry_64.S early in handling a fault
* caused by a bad iret to user mode. To handle the fault
* correctly, we want move our stack frame to task_pt_regs
* and we want to pretend that the exception came from the
* iret target.
*/
struct bad_iret_stack *new_stack =
container_of(task_pt_regs(current),
struct bad_iret_stack, regs);
/* Copy the IRET target to the new stack. */
memmove(&new_stack->regs.ip, (void *)s->regs.sp, 5*8);
/* Copy the remainder of the stack from the current stack. */
memmove(new_stack, s, offsetof(struct bad_iret_stack, regs.ip));
BUG_ON(!user_mode_vm(&new_stack->regs));
return new_stack;
}
#endif
/*
@ -778,7 +815,7 @@ void __init trap_init(void)
set_intr_gate(X86_TRAP_OLD_MF, coprocessor_segment_overrun);
set_intr_gate(X86_TRAP_TS, invalid_TSS);
set_intr_gate(X86_TRAP_NP, segment_not_present);
set_intr_gate_ist(X86_TRAP_SS, &stack_segment, STACKFAULT_STACK);
set_intr_gate(X86_TRAP_SS, stack_segment);
set_intr_gate(X86_TRAP_GP, general_protection);
set_intr_gate(X86_TRAP_SPURIOUS, spurious_interrupt_bug);
set_intr_gate(X86_TRAP_MF, coprocessor_error);

11
arch/x86/mm/init_64.c
View File

@ -1123,7 +1123,7 @@ void mark_rodata_ro(void)
unsigned long end = (unsigned long) &__end_rodata_hpage_align;
unsigned long text_end = PFN_ALIGN(&__stop___ex_table);
unsigned long rodata_end = PFN_ALIGN(&__end_rodata);
unsigned long all_end = PFN_ALIGN(&_end);
unsigned long all_end;
printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n",
(end - start) >> 10);
@ -1134,7 +1134,16 @@ void mark_rodata_ro(void)
/*
* The rodata/data/bss/brk section (but not the kernel text!)
* should also be not-executable.
*
* We align all_end to PMD_SIZE because the existing mapping
* is a full PMD. If we would align _brk_end to PAGE_SIZE we
* split the PMD and the reminder between _brk_end and the end
* of the PMD will remain mapped executable.
*
* Any PMD which was setup after the one which covers _brk_end
* has been zapped already via cleanup_highmem().
*/
all_end = roundup((unsigned long)_brk_end, PMD_SIZE);
set_memory_nx(rodata_start, (all_end - rodata_start) >> PAGE_SHIFT);
rodata_test();

11
arch/x86/tools/calc_run_size.pl
View File

@ -19,7 +19,16 @@ while (<>) {
if ($file_offset == 0) {
$file_offset = $offset;
} elsif ($file_offset != $offset) {
die ".bss and .brk lack common file offset\n";
# BFD linker shows the same file offset in ELF.
# Gold linker shows them as consecutive.
next if ($file_offset + $mem_size == $offset + $size);
printf STDERR "file_offset: 0x%lx\n", $file_offset;
printf STDERR "mem_size: 0x%lx\n", $mem_size;
printf STDERR "offset: 0x%lx\n", $offset;
printf STDERR "size: 0x%lx\n", $size;
die ".bss and .brk are non-contiguous\n";
}
}
}

2
drivers/acpi/device_pm.c
View File

@ -878,7 +878,7 @@ int acpi_dev_suspend_late(struct device *dev)
return 0;
target_state = acpi_target_system_state();
wakeup = device_may_wakeup(dev);
wakeup = device_may_wakeup(dev) && acpi_device_can_wakeup(adev);
error = acpi_device_wakeup(adev, target_state, wakeup);
if (wakeup && error)
return error;

12
drivers/clocksource/sun4i_timer.c
View File

@ -182,6 +182,12 @@ static void __init sun4i_timer_init(struct device_node *node)
/* Make sure timer is stopped before playing with interrupts */
sun4i_clkevt_time_stop(0);
sun4i_clockevent.cpumask = cpu_possible_mask;
sun4i_clockevent.irq = irq;
clockevents_config_and_register(&sun4i_clockevent, rate,
TIMER_SYNC_TICKS, 0xffffffff);
ret = setup_irq(irq, &sun4i_timer_irq);
if (ret)
pr_warn("failed to setup irq %d\n", irq);
@ -189,12 +195,6 @@ static void __init sun4i_timer_init(struct device_node *node)
/* Enable timer0 interrupt */
val = readl(timer_base + TIMER_IRQ_EN_REG);
writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG);
sun4i_clockevent.cpumask = cpu_possible_mask;
sun4i_clockevent.irq = irq;
clockevents_config_and_register(&sun4i_clockevent, rate,
TIMER_SYNC_TICKS, 0xffffffff);
}
CLOCKSOURCE_OF_DECLARE(sun4i, "allwinner,sun4i-a10-timer",
sun4i_timer_init);

23
drivers/dma/pl330.c
View File

@ -271,7 +271,7 @@ struct pl330_config {
#define DMAC_MODE_NS (1 << 0)
unsigned int mode;
unsigned int data_bus_width:10; /* In number of bits */
unsigned int data_buf_dep:10;
unsigned int data_buf_dep:11;
unsigned int num_chan:4;
unsigned int num_peri:6;
u32 peri_ns;
@ -2336,7 +2336,7 @@ static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len)
int burst_len;
burst_len = pl330->pcfg.data_bus_width / 8;
burst_len *= pl330->pcfg.data_buf_dep;
burst_len *= pl330->pcfg.data_buf_dep / pl330->pcfg.num_chan;
burst_len >>= desc->rqcfg.brst_size;
/* src/dst_burst_len can't be more than 16 */
@ -2459,16 +2459,25 @@ pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst,
/* Select max possible burst size */
burst = pl330->pcfg.data_bus_width / 8;
while (burst > 1) {
if (!(len % burst))
break;
/*
* Make sure we use a burst size that aligns with all the memcpy
* parameters because our DMA programming algorithm doesn't cope with
* transfers which straddle an entry in the DMA device's MFIFO.
*/
while ((src | dst | len) & (burst - 1))
burst /= 2;
}
desc->rqcfg.brst_size = 0;
while (burst != (1 << desc->rqcfg.brst_size))
desc->rqcfg.brst_size++;
/*
* If burst size is smaller than bus width then make sure we only
* transfer one at a time to avoid a burst stradling an MFIFO entry.
*/
if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width)
desc->rqcfg.brst_len = 1;
desc->rqcfg.brst_len = get_burst_len(desc, len);
desc->txd.flags = flags;
@ -2732,7 +2741,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id)
dev_info(&adev->dev,
"Loaded driver for PL330 DMAC-%d\n", adev->periphid);
"Loaded driver for PL330 DMAC-%x\n", adev->periphid);
dev_info(&adev->dev,
"\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,

61
drivers/dma/sun6i-dma.c
View File

@ -230,30 +230,25 @@ static inline void sun6i_dma_dump_chan_regs(struct sun6i_dma_dev *sdev,
readl(pchan->base + DMA_CHAN_CUR_PARA));
}
static inline int convert_burst(u32 maxburst, u8 *burst)
static inline s8 convert_burst(u32 maxburst)
{
switch (maxburst) {
case 1:
*burst = 0;
break;
return 0;
case 8:
*burst = 2;
break;
return 2;
default:
return -EINVAL;
}
return 0;
}
static inline int convert_buswidth(enum dma_slave_buswidth addr_width, u8 *width)
static inline s8 convert_buswidth(enum dma_slave_buswidth addr_width)
{
if ((addr_width < DMA_SLAVE_BUSWIDTH_1_BYTE) ||
(addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES))
return -EINVAL;
*width = addr_width >> 1;
return 0;
return addr_width >> 1;
}
static void *sun6i_dma_lli_add(struct sun6i_dma_lli *prev,
@ -284,26 +279,25 @@ static inline int sun6i_dma_cfg_lli(struct sun6i_dma_lli *lli,
struct dma_slave_config *config)
{
u8 src_width, dst_width, src_burst, dst_burst;
int ret;
if (!config)
return -EINVAL;
ret = convert_burst(config->src_maxburst, &src_burst);
if (ret)
return ret;
src_burst = convert_burst(config->src_maxburst);
if (src_burst)
return src_burst;
ret = convert_burst(config->dst_maxburst, &dst_burst);
if (ret)
return ret;
dst_burst = convert_burst(config->dst_maxburst);
if (dst_burst)
return dst_burst;
ret = convert_buswidth(config->src_addr_width, &src_width);
if (ret)
return ret;
src_width = convert_buswidth(config->src_addr_width);
if (src_width)
return src_width;
ret = convert_buswidth(config->dst_addr_width, &dst_width);
if (ret)
return ret;
dst_width = convert_buswidth(config->dst_addr_width);
if (dst_width)
return dst_width;
lli->cfg = DMA_CHAN_CFG_SRC_BURST(src_burst) |
DMA_CHAN_CFG_SRC_WIDTH(src_width) |
@ -542,11 +536,10 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy(
{
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
struct dma_slave_config *sconfig = &vchan->cfg;
struct sun6i_dma_lli *v_lli;
struct sun6i_desc *txd;
dma_addr_t p_lli;
int ret;
s8 burst, width;
dev_dbg(chan2dev(chan),
"%s; chan: %d, dest: %pad, src: %pad, len: %zu. flags: 0x%08lx\n",
@ -565,14 +558,21 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy(
goto err_txd_free;
}
ret = sun6i_dma_cfg_lli(v_lli, src, dest, len, sconfig);
if (ret)
goto err_dma_free;
v_lli->src = src;
v_lli->dst = dest;
v_lli->len = len;
v_lli->para = NORMAL_WAIT;
burst = convert_burst(8);
width = convert_buswidth(DMA_SLAVE_BUSWIDTH_4_BYTES);
v_lli->cfg |= DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) |
DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) |
DMA_CHAN_CFG_DST_LINEAR_MODE |
DMA_CHAN_CFG_SRC_LINEAR_MODE;
DMA_CHAN_CFG_SRC_LINEAR_MODE |
DMA_CHAN_CFG_SRC_BURST(burst) |
DMA_CHAN_CFG_SRC_WIDTH(width) |
DMA_CHAN_CFG_DST_BURST(burst) |
DMA_CHAN_CFG_DST_WIDTH(width);
sun6i_dma_lli_add(NULL, v_lli, p_lli, txd);
@ -580,8 +580,6 @@ static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy(
return vchan_tx_prep(&vchan->vc, &txd->vd, flags);
err_dma_free:
dma_pool_free(sdev->pool, v_lli, p_lli);
err_txd_free:
kfree(txd);
return NULL;
@ -915,6 +913,7 @@ static int sun6i_dma_probe(struct platform_device *pdev)
sdc->slave.device_prep_dma_memcpy = sun6i_dma_prep_dma_memcpy;
sdc->slave.device_control = sun6i_dma_control;
sdc->slave.chancnt = NR_MAX_VCHANS;
sdc->slave.copy_align = 4;
sdc->slave.dev = &pdev->dev;

14
drivers/gpu/drm/i915/i915_dma.c
View File

@ -1670,17 +1670,19 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags)
goto out_regs;
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
ret = i915_kick_out_vgacon(dev_priv);
if (ret) {
DRM_ERROR("failed to remove conflicting VGA console\n");
goto out_gtt;
}
/* WARNING: Apparently we must kick fbdev drivers before vgacon,
* otherwise the vga fbdev driver falls over. */
ret = i915_kick_out_firmware_fb(dev_priv);
if (ret) {
DRM_ERROR("failed to remove conflicting framebuffer drivers\n");
goto out_gtt;
}
ret = i915_kick_out_vgacon(dev_priv);
if (ret) {
DRM_ERROR("failed to remove conflicting VGA console\n");
goto out_gtt;
}
}
pci_set_master(dev->pdev);

5
drivers/gpu/drm/i915/intel_pm.c
View File

@ -5469,11 +5469,6 @@ static void gen6_init_clock_gating(struct drm_device *dev)
I915_WRITE(_3D_CHICKEN,
_MASKED_BIT_ENABLE(_3D_CHICKEN_HIZ_PLANE_DISABLE_MSAA_4X_SNB));
/* WaSetupGtModeTdRowDispatch:snb */
if (IS_SNB_GT1(dev))
I915_WRITE(GEN6_GT_MODE,
_MASKED_BIT_ENABLE(GEN6_TD_FOUR_ROW_DISPATCH_DISABLE));
/* WaDisable_RenderCache_OperationalFlush:snb */
I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));

2
drivers/gpu/drm/radeon/r600_dpm.c
View File

@ -1256,7 +1256,7 @@ int r600_parse_extended_power_table(struct radeon_device *rdev)
(mode_info->atom_context->bios + data_offset +
le16_to_cpu(ext_hdr->usPowerTuneTableOffset));
rdev->pm.dpm.dyn_state.cac_tdp_table->maximum_power_delivery_limit =
ppt->usMaximumPowerDeliveryLimit;
le16_to_cpu(ppt->usMaximumPowerDeliveryLimit);
pt = &ppt->power_tune_table;
} else {
ATOM_PPLIB_POWERTUNE_Table *ppt = (ATOM_PPLIB_POWERTUNE_Table *)

3
drivers/gpu/drm/radeon/radeon_encoders.c
View File

@ -179,6 +179,9 @@ static void radeon_encoder_add_backlight(struct radeon_encoder *radeon_encoder,
(rdev->pdev->subsystem_vendor == 0x1734) &&
(rdev->pdev->subsystem_device == 0x1107))
use_bl = false;
/* disable native backlight control on older asics */
else if (rdev->family < CHIP_R600)
use_bl = false;
else
use_bl = true;
}

44
drivers/infiniband/ulp/isert/ib_isert.c
View File

@ -115,9 +115,12 @@ isert_conn_setup_qp(struct isert_conn *isert_conn, struct rdma_cm_id *cma_id,
attr.cap.max_recv_wr = ISERT_QP_MAX_RECV_DTOS;
/*
* FIXME: Use devattr.max_sge - 2 for max_send_sge as
* work-around for RDMA_READ..
* work-around for RDMA_READs with ConnectX-2.
*
* Also, still make sure to have at least two SGEs for
* outgoing control PDU responses.
*/
attr.cap.max_send_sge = device->dev_attr.max_sge - 2;
attr.cap.max_send_sge = max(2, device->dev_attr.max_sge - 2);
isert_conn->max_sge = attr.cap.max_send_sge;
attr.cap.max_recv_sge = 1;
@ -225,12 +228,16 @@ isert_create_device_ib_res(struct isert_device *device)
struct isert_cq_desc *cq_desc;
struct ib_device_attr *dev_attr;
int ret = 0, i, j;
int max_rx_cqe, max_tx_cqe;
dev_attr = &device->dev_attr;
ret = isert_query_device(ib_dev, dev_attr);
if (ret)
return ret;
max_rx_cqe = min(ISER_MAX_RX_CQ_LEN, dev_attr->max_cqe);
max_tx_cqe = min(ISER_MAX_TX_CQ_LEN, dev_attr->max_cqe);
/* asign function handlers */
if (dev_attr->device_cap_flags & IB_DEVICE_MEM_MGT_EXTENSIONS &&
dev_attr->device_cap_flags & IB_DEVICE_SIGNATURE_HANDOVER) {
@ -272,7 +279,7 @@ isert_create_device_ib_res(struct isert_device *device)
isert_cq_rx_callback,
isert_cq_event_callback,
(void *)&cq_desc[i],
ISER_MAX_RX_CQ_LEN, i);
max_rx_cqe, i);
if (IS_ERR(device->dev_rx_cq[i])) {
ret = PTR_ERR(device->dev_rx_cq[i]);
device->dev_rx_cq[i] = NULL;
@ -284,7 +291,7 @@ isert_create_device_ib_res(struct isert_device *device)
isert_cq_tx_callback,
isert_cq_event_callback,
(void *)&cq_desc[i],
ISER_MAX_TX_CQ_LEN, i);
max_tx_cqe, i);
if (IS_ERR(device->dev_tx_cq[i])) {
ret = PTR_ERR(device->dev_tx_cq[i]);
device->dev_tx_cq[i] = NULL;
@ -803,14 +810,25 @@ wake_up:
complete(&isert_conn->conn_wait);
}
static void
static int
isert_disconnected_handler(struct rdma_cm_id *cma_id, bool disconnect)
{
struct isert_conn *isert_conn = (struct isert_conn *)cma_id->context;
struct isert_conn *isert_conn;
if (!cma_id->qp) {
struct isert_np *isert_np = cma_id->context;
isert_np->np_cm_id = NULL;
return -1;
}
isert_conn = (struct isert_conn *)cma_id->context;
isert_conn->disconnect = disconnect;
INIT_WORK(&isert_conn->conn_logout_work, isert_disconnect_work);
schedule_work(&isert_conn->conn_logout_work);
return 0;
}
static int
@ -825,6 +843,9 @@ isert_cma_handler(struct rdma_cm_id *cma_id, struct rdma_cm_event *event)
switch (event->event) {
case RDMA_CM_EVENT_CONNECT_REQUEST:
ret = isert_connect_request(cma_id, event);
if (ret)
pr_err("isert_cma_handler failed RDMA_CM_EVENT: 0x%08x %d\n",
event->event, ret);
break;
case RDMA_CM_EVENT_ESTABLISHED:
isert_connected_handler(cma_id);
@ -834,7 +855,7 @@ isert_cma_handler(struct rdma_cm_id *cma_id, struct rdma_cm_event *event)
case RDMA_CM_EVENT_DEVICE_REMOVAL: /* FALLTHRU */
disconnect = true;
case RDMA_CM_EVENT_TIMEWAIT_EXIT: /* FALLTHRU */
isert_disconnected_handler(cma_id, disconnect);
ret = isert_disconnected_handler(cma_id, disconnect);
break;
case RDMA_CM_EVENT_CONNECT_ERROR:
default:
@ -842,12 +863,6 @@ isert_cma_handler(struct rdma_cm_id *cma_id, struct rdma_cm_event *event)
break;
}
if (ret != 0) {
pr_err("isert_cma_handler failed RDMA_CM_EVENT: 0x%08x %d\n",
event->event, ret);
dump_stack();
}
return ret;
}
@ -3190,7 +3205,8 @@ isert_free_np(struct iscsi_np *np)
{
struct isert_np *isert_np = (struct isert_np *)np->np_context;
rdma_destroy_id(isert_np->np_cm_id);
if (isert_np->np_cm_id)
rdma_destroy_id(isert_np->np_cm_id);
np->np_context = NULL;
kfree(isert_np);

8
drivers/infiniband/ulp/srpt/ib_srpt.c
View File

@ -2092,6 +2092,7 @@ static int srpt_create_ch_ib(struct srpt_rdma_ch *ch)
if (!qp_init)
goto out;
retry:
ch->cq = ib_create_cq(sdev->device, srpt_completion, NULL, ch,
ch->rq_size + srp_sq_size, 0);
if (IS_ERR(ch->cq)) {
@ -2115,6 +2116,13 @@ static int srpt_create_ch_ib(struct srpt_rdma_ch *ch)
ch->qp = ib_create_qp(sdev->pd, qp_init);
if (IS_ERR(ch->qp)) {
ret = PTR_ERR(ch->qp);
if (ret == -ENOMEM) {
srp_sq_size /= 2;
if (srp_sq_size >= MIN_SRPT_SQ_SIZE) {
ib_destroy_cq(ch->cq);
goto retry;
}
}
printk(KERN_ERR "failed to create_qp ret= %d\n", ret);
goto err_destroy_cq;
}

3
drivers/net/bonding/bond_main.c
View File

@ -2471,7 +2471,8 @@ static void bond_loadbalance_arp_mon(struct work_struct *work)
bond_slave_state_change(bond);
if (BOND_MODE(bond) == BOND_MODE_XOR)
bond_update_slave_arr(bond, NULL);
} else if (do_failover) {
}
if (do_failover) {
block_netpoll_tx();
bond_select_active_slave(bond);
unblock_netpoll_tx();

4
drivers/net/can/dev.c
View File

@ -110,7 +110,7 @@ static int can_calc_bittiming(struct net_device *dev, struct can_bittiming *bt,
long rate;
u64 v64;
/* Use CIA recommended sample points */
/* Use CiA recommended sample points */
if (bt->sample_point) {
sampl_pt = bt->sample_point;
} else {
@ -382,7 +382,7 @@ void can_free_echo_skb(struct net_device *dev, unsigned int idx)
BUG_ON(idx >= priv->echo_skb_max);
if (priv->echo_skb[idx]) {
kfree_skb(priv->echo_skb[idx]);
dev_kfree_skb_any(priv->echo_skb[idx]);
priv->echo_skb[idx] = NULL;
}
}

1
drivers/net/can/m_can/Kconfig
View File

@ -1,4 +1,5 @@
config CAN_M_CAN
depends on HAS_IOMEM
tristate "Bosch M_CAN devices"
---help---
Say Y here if you want to support for Bosch M_CAN controller.

219
drivers/net/can/m_can/m_can.c
View File

@ -105,14 +105,36 @@ enum m_can_mram_cfg {
MRAM_CFG_NUM,
};
/* Fast Bit Timing & Prescaler Register (FBTP) */
#define FBTR_FBRP_MASK 0x1f
#define FBTR_FBRP_SHIFT 16
#define FBTR_FTSEG1_SHIFT 8
#define FBTR_FTSEG1_MASK (0xf << FBTR_FTSEG1_SHIFT)
#define FBTR_FTSEG2_SHIFT 4
#define FBTR_FTSEG2_MASK (0x7 << FBTR_FTSEG2_SHIFT)
#define FBTR_FSJW_SHIFT 0
#define FBTR_FSJW_MASK 0x3
/* Test Register (TEST) */
#define TEST_LBCK BIT(4)
/* CC Control Register(CCCR) */
#define CCCR_TEST BIT(7)
#define CCCR_MON BIT(5)
#define CCCR_CCE BIT(1)
#define CCCR_INIT BIT(0)
#define CCCR_TEST BIT(7)
#define CCCR_CMR_MASK 0x3
#define CCCR_CMR_SHIFT 10
#define CCCR_CMR_CANFD 0x1
#define CCCR_CMR_CANFD_BRS 0x2
#define CCCR_CMR_CAN 0x3
#define CCCR_CME_MASK 0x3
#define CCCR_CME_SHIFT 8
#define CCCR_CME_CAN 0
#define CCCR_CME_CANFD 0x1
#define CCCR_CME_CANFD_BRS 0x2
#define CCCR_TEST BIT(7)
#define CCCR_MON BIT(5)
#define CCCR_CCE BIT(1)
#define CCCR_INIT BIT(0)
#define CCCR_CANFD 0x10
/* Bit Timing & Prescaler Register (BTP) */
#define BTR_BRP_MASK 0x3ff
@ -204,6 +226,7 @@ enum m_can_mram_cfg {
/* Rx Buffer / FIFO Element Size Configuration (RXESC) */
#define M_CAN_RXESC_8BYTES 0x0
#define M_CAN_RXESC_64BYTES 0x777
/* Tx Buffer Configuration(TXBC) */
#define TXBC_NDTB_OFF 16
@ -211,6 +234,7 @@ enum m_can_mram_cfg {
/* Tx Buffer Element Size Configuration(TXESC) */
#define TXESC_TBDS_8BYTES 0x0
#define TXESC_TBDS_64BYTES 0x7
/* Tx Event FIFO Con.guration (TXEFC) */
#define TXEFC_EFS_OFF 16
@ -219,11 +243,11 @@ enum m_can_mram_cfg {
/* Message RAM Configuration (in bytes) */
#define SIDF_ELEMENT_SIZE 4
#define XIDF_ELEMENT_SIZE 8
#define RXF0_ELEMENT_SIZE 16
#define RXF1_ELEMENT_SIZE 16
#define RXF0_ELEMENT_SIZE 72
#define RXF1_ELEMENT_SIZE 72
#define RXB_ELEMENT_SIZE 16
#define TXE_ELEMENT_SIZE 8
#define TXB_ELEMENT_SIZE 16
#define TXB_ELEMENT_SIZE 72
/* Message RAM Elements */
#define M_CAN_FIFO_ID 0x0
@ -231,11 +255,17 @@ enum m_can_mram_cfg {
#define M_CAN_FIFO_DATA(n) (0x8 + ((n) << 2))
/* Rx Buffer Element */
/* R0 */
#define RX_BUF_ESI BIT(31)
#define RX_BUF_XTD BIT(30)
#define RX_BUF_RTR BIT(29)
/* R1 */
#define RX_BUF_ANMF BIT(31)
#define RX_BUF_EDL BIT(21)
#define RX_BUF_BRS BIT(20)
/* Tx Buffer Element */
/* R0 */
#define TX_BUF_XTD BIT(30)
#define TX_BUF_RTR BIT(29)
@ -296,6 +326,7 @@ static inline void m_can_config_endisable(const struct m_can_priv *priv,
if (enable) {
/* enable m_can configuration */
m_can_write(priv, M_CAN_CCCR, cccr | CCCR_INIT);
udelay(5);
/* CCCR.CCE can only be set/reset while CCCR.INIT = '1' */
m_can_write(priv, M_CAN_CCCR, cccr | CCCR_INIT | CCCR_CCE);
} else {
@ -326,41 +357,67 @@ static inline void m_can_disable_all_interrupts(const struct m_can_priv *priv)
m_can_write(priv, M_CAN_ILE, 0x0);
}
static void m_can_read_fifo(const struct net_device *dev, struct can_frame *cf,
u32 rxfs)
static void m_can_read_fifo(struct net_device *dev, u32 rxfs)
{
struct net_device_stats *stats = &dev->stats;
struct m_can_priv *priv = netdev_priv(dev);
u32 id, fgi;
struct canfd_frame *cf;
struct sk_buff *skb;
u32 id, fgi, dlc;
int i;
/* calculate the fifo get index for where to read data */
fgi = (rxfs & RXFS_FGI_MASK) >> RXFS_FGI_OFF;
dlc = m_can_fifo_read(priv, fgi, M_CAN_FIFO_DLC);
if (dlc & RX_BUF_EDL)
skb = alloc_canfd_skb(dev, &cf);
else
skb = alloc_can_skb(dev, (struct can_frame **)&cf);
if (!skb) {
stats->rx_dropped++;
return;
}
if (dlc & RX_BUF_EDL)
cf->len = can_dlc2len((dlc >> 16) & 0x0F);
else
cf->len = get_can_dlc((dlc >> 16) & 0x0F);
id = m_can_fifo_read(priv, fgi, M_CAN_FIFO_ID);
if (id & RX_BUF_XTD)
cf->can_id = (id & CAN_EFF_MASK) | CAN_EFF_FLAG;
else
cf->can_id = (id >> 18) & CAN_SFF_MASK;
if (id & RX_BUF_RTR) {
if (id & RX_BUF_ESI) {
cf->flags |= CANFD_ESI;
netdev_dbg(dev, "ESI Error\n");
}
if (!(dlc & RX_BUF_EDL) && (id & RX_BUF_RTR)) {
cf->can_id |= CAN_RTR_FLAG;
} else {
id = m_can_fifo_read(priv, fgi, M_CAN_FIFO_DLC);
cf->can_dlc = get_can_dlc((id >> 16) & 0x0F);
*(u32 *)(cf->data + 0) = m_can_fifo_read(priv, fgi,
M_CAN_FIFO_DATA(0));
*(u32 *)(cf->data + 4) = m_can_fifo_read(priv, fgi,
M_CAN_FIFO_DATA(1));
if (dlc & RX_BUF_BRS)
cf->flags |= CANFD_BRS;
for (i = 0; i < cf->len; i += 4)
*(u32 *)(cf->data + i) =
m_can_fifo_read(priv, fgi,
M_CAN_FIFO_DATA(i / 4));
}
/* acknowledge rx fifo 0 */
m_can_write(priv, M_CAN_RXF0A, fgi);
stats->rx_packets++;
stats->rx_bytes += cf->len;
netif_receive_skb(skb);
}
static int m_can_do_rx_poll(struct net_device *dev, int quota)
{
struct m_can_priv *priv = netdev_priv(dev);
struct net_device_stats *stats = &dev->stats;
struct sk_buff *skb;
struct can_frame *frame;
u32 pkts = 0;
u32 rxfs;
@ -374,18 +431,7 @@ static int m_can_do_rx_poll(struct net_device *dev, int quota)
if (rxfs & RXFS_RFL)
netdev_warn(dev, "Rx FIFO 0 Message Lost\n");
skb = alloc_can_skb(dev, &frame);
if (!skb) {
stats->rx_dropped++;
return pkts;
}
m_can_read_fifo(dev, frame, rxfs);
stats->rx_packets++;
stats->rx_bytes += frame->can_dlc;
netif_receive_skb(skb);
m_can_read_fifo(dev, rxfs);
quota--;
pkts++;
@ -481,11 +527,23 @@ static int m_can_handle_lec_err(struct net_device *dev,
return 1;
}
static int __m_can_get_berr_counter(const struct net_device *dev,
struct can_berr_counter *bec)
{
struct m_can_priv *priv = netdev_priv(dev);
unsigned int ecr;
ecr = m_can_read(priv, M_CAN_ECR);
bec->rxerr = (ecr & ECR_REC_MASK) >> ECR_REC_SHIFT;
bec->txerr = ecr & ECR_TEC_MASK;
return 0;
}
static int m_can_get_berr_counter(const struct net_device *dev,
struct can_berr_counter *bec)
{
struct m_can_priv *priv = netdev_priv(dev);
unsigned int ecr;
int err;
err = clk_prepare_enable(priv->hclk);
@ -498,9 +556,7 @@ static int m_can_get_berr_counter(const struct net_device *dev,
return err;
}
ecr = m_can_read(priv, M_CAN_ECR);
bec->rxerr = (ecr & ECR_REC_MASK) >> ECR_REC_SHIFT;
bec->txerr = ecr & ECR_TEC_MASK;
__m_can_get_berr_counter(dev, bec);
clk_disable_unprepare(priv->cclk);
clk_disable_unprepare(priv->hclk);
@ -544,7 +600,7 @@ static int m_can_handle_state_change(struct net_device *dev,
if (unlikely(!skb))
return 0;
m_can_get_berr_counter(dev, &bec);
__m_can_get_berr_counter(dev, &bec);
switch (new_state) {
case CAN_STATE_ERROR_ACTIVE:
@ -596,14 +652,14 @@ static int m_can_handle_state_errors(struct net_device *dev, u32 psr)
if ((psr & PSR_EP) &&
(priv->can.state != CAN_STATE_ERROR_PASSIVE)) {
netdev_dbg(dev, "entered error warning state\n");
netdev_dbg(dev, "entered error passive state\n");
work_done += m_can_handle_state_change(dev,
CAN_STATE_ERROR_PASSIVE);
}
if ((psr & PSR_BO) &&
(priv->can.state != CAN_STATE_BUS_OFF)) {
netdev_dbg(dev, "entered error warning state\n");
netdev_dbg(dev, "entered error bus off state\n");
work_done += m_can_handle_state_change(dev,
CAN_STATE_BUS_OFF);
}
@ -615,7 +671,7 @@ static void m_can_handle_other_err(struct net_device *dev, u32 irqstatus)
{
if (irqstatus & IR_WDI)
netdev_err(dev, "Message RAM Watchdog event due to missing READY\n");
if (irqstatus & IR_BEU)
if (irqstatus & IR_ELO)
netdev_err(dev, "Error Logging Overflow\n");
if (irqstatus & IR_BEU)
netdev_err(dev, "Bit Error Uncorrected\n");
@ -733,10 +789,23 @@ static const struct can_bittiming_const m_can_bittiming_const = {
.brp_inc = 1,
};
static const struct can_bittiming_const m_can_data_bittiming_const = {
.name = KBUILD_MODNAME,
.tseg1_min = 2, /* Time segment 1 = prop_seg + phase_seg1 */
.tseg1_max = 16,
.tseg2_min = 1, /* Time segment 2 = phase_seg2 */
.tseg2_max = 8,
.sjw_max = 4,
.brp_min = 1,
.brp_max = 32,
.brp_inc = 1,
};
static int m_can_set_bittiming(struct net_device *dev)
{
struct m_can_priv *priv = netdev_priv(dev);
const struct can_bittiming *bt = &priv->can.bittiming;
const struct can_bittiming *dbt = &priv->can.data_bittiming;
u16 brp, sjw, tseg1, tseg2;
u32 reg_btp;
@ -747,7 +816,17 @@ static int m_can_set_bittiming(struct net_device *dev)
reg_btp = (brp << BTR_BRP_SHIFT) | (sjw << BTR_SJW_SHIFT) |
(tseg1 << BTR_TSEG1_SHIFT) | (tseg2 << BTR_TSEG2_SHIFT);
m_can_write(priv, M_CAN_BTP, reg_btp);
netdev_dbg(dev, "setting BTP 0x%x\n", reg_btp);
if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
brp = dbt->brp - 1;
sjw = dbt->sjw - 1;
tseg1 = dbt->prop_seg + dbt->phase_seg1 - 1;
tseg2 = dbt->phase_seg2 - 1;
reg_btp = (brp << FBTR_FBRP_SHIFT) | (sjw << FBTR_FSJW_SHIFT) |
(tseg1 << FBTR_FTSEG1_SHIFT) |
(tseg2 << FBTR_FTSEG2_SHIFT);
m_can_write(priv, M_CAN_FBTP, reg_btp);
}
return 0;
}
@ -767,8 +846,8 @@ static void m_can_chip_config(struct net_device *dev)
m_can_config_endisable(priv, true);
/* RX Buffer/FIFO Element Size 8 bytes data field */
m_can_write(priv, M_CAN_RXESC, M_CAN_RXESC_8BYTES);
/* RX Buffer/FIFO Element Size 64 bytes data field */
m_can_write(priv, M_CAN_RXESC, M_CAN_RXESC_64BYTES);
/* Accept Non-matching Frames Into FIFO 0 */
m_can_write(priv, M_CAN_GFC, 0x0);
@ -777,8 +856,8 @@ static void m_can_chip_config(struct net_device *dev)
m_can_write(priv, M_CAN_TXBC, (1 << TXBC_NDTB_OFF) |
priv->mcfg[MRAM_TXB].off);
/* only support 8 bytes firstly */
m_can_write(priv, M_CAN_TXESC, TXESC_TBDS_8BYTES);
/* support 64 bytes payload */
m_can_write(priv, M_CAN_TXESC, TXESC_TBDS_64BYTES);
m_can_write(priv, M_CAN_TXEFC, (1 << TXEFC_EFS_OFF) |
priv->mcfg[MRAM_TXE].off);
@ -793,7 +872,8 @@ static void m_can_chip_config(struct net_device *dev)
RXFC_FWM_1 | priv->mcfg[MRAM_RXF1].off);
cccr = m_can_read(priv, M_CAN_CCCR);
cccr &= ~(CCCR_TEST | CCCR_MON);
cccr &= ~(CCCR_TEST | CCCR_MON | (CCCR_CMR_MASK << CCCR_CMR_SHIFT) |
(CCCR_CME_MASK << CCCR_CME_SHIFT));
test = m_can_read(priv, M_CAN_TEST);
test &= ~TEST_LBCK;
@ -805,6 +885,9 @@ static void m_can_chip_config(struct net_device *dev)
test |= TEST_LBCK;
}
if (priv->can.ctrlmode & CAN_CTRLMODE_FD)
cccr |= CCCR_CME_CANFD_BRS << CCCR_CME_SHIFT;
m_can_write(priv, M_CAN_CCCR, cccr);
m_can_write(priv, M_CAN_TEST, test);
@ -869,11 +952,13 @@ static struct net_device *alloc_m_can_dev(void)
priv->dev = dev;
priv->can.bittiming_const = &m_can_bittiming_const;
priv->can.data_bittiming_const = &m_can_data_bittiming_const;
priv->can.do_set_mode = m_can_set_mode;
priv->can.do_get_berr_counter = m_can_get_berr_counter;
priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
CAN_CTRLMODE_LISTENONLY |
CAN_CTRLMODE_BERR_REPORTING;
CAN_CTRLMODE_BERR_REPORTING |
CAN_CTRLMODE_FD;
return dev;
}
@ -956,8 +1041,9 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
struct m_can_priv *priv = netdev_priv(dev);
struct can_frame *cf = (struct can_frame *)skb->data;
u32 id;
struct canfd_frame *cf = (struct canfd_frame *)skb->data;
u32 id, cccr;
int i;
if (can_dropped_invalid_skb(dev, skb))
return NETDEV_TX_OK;
@ -976,11 +1062,28 @@ static netdev_tx_t m_can_start_xmit(struct sk_buff *skb,
/* message ram configuration */
m_can_fifo_write(priv, 0, M_CAN_FIFO_ID, id);
m_can_fifo_write(priv, 0, M_CAN_FIFO_DLC, cf->can_dlc << 16);
m_can_fifo_write(priv, 0, M_CAN_FIFO_DATA(0), *(u32 *)(cf->data + 0));
m_can_fifo_write(priv, 0, M_CAN_FIFO_DATA(1), *(u32 *)(cf->data + 4));
m_can_fifo_write(priv, 0, M_CAN_FIFO_DLC, can_len2dlc(cf->len) << 16);
for (i = 0; i < cf->len; i += 4)
m_can_fifo_write(priv, 0, M_CAN_FIFO_DATA(i / 4),
*(u32 *)(cf->data + i));
can_put_echo_skb(skb, dev, 0);
if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
cccr = m_can_read(priv, M_CAN_CCCR);
cccr &= ~(CCCR_CMR_MASK << CCCR_CMR_SHIFT);
if (can_is_canfd_skb(skb)) {
if (cf->flags & CANFD_BRS)
cccr |= CCCR_CMR_CANFD_BRS << CCCR_CMR_SHIFT;
else
cccr |= CCCR_CMR_CANFD << CCCR_CMR_SHIFT;
} else {
cccr |= CCCR_CMR_CAN << CCCR_CMR_SHIFT;
}
m_can_write(priv, M_CAN_CCCR, cccr);
}
/* enable first TX buffer to start transfer */
m_can_write(priv, M_CAN_TXBTIE, 0x1);
m_can_write(priv, M_CAN_TXBAR, 0x1);
@ -992,6 +1095,7 @@ static const struct net_device_ops m_can_netdev_ops = {
.ndo_open = m_can_open,
.ndo_stop = m_can_close,
.ndo_start_xmit = m_can_start_xmit,
.ndo_change_mtu = can_change_mtu,
};
static int register_m_can_dev(struct net_device *dev)
@ -1009,7 +1113,7 @@ static int m_can_of_parse_mram(struct platform_device *pdev,
struct resource *res;
void __iomem *addr;
u32 out_val[MRAM_CFG_LEN];
int ret;
int i, start, end, ret;
/* message ram could be shared */
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
@ -1060,6 +1164,15 @@ static int m_can_of_parse_mram(struct platform_device *pdev,
priv->mcfg[MRAM_TXE].off, priv->mcfg[MRAM_TXE].num,
priv->mcfg[MRAM_TXB].off, priv->mcfg[MRAM_TXB].num);
/* initialize the entire Message RAM in use to avoid possible
* ECC/parity checksum errors when reading an uninitialized buffer
*/
start = priv->mcfg[MRAM_SIDF].off;
end = priv->mcfg[MRAM_TXB].off +
priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
for (i = start; i < end; i += 4)
writel(0x0, priv->mram_base + i);
return 0;
}

1
drivers/net/can/rcar_can.c
View File

@ -628,6 +628,7 @@ static const struct net_device_ops rcar_can_netdev_ops = {
.ndo_open = rcar_can_open,
.ndo_stop = rcar_can_close,
.ndo_start_xmit = rcar_can_start_xmit,
.ndo_change_mtu = can_change_mtu,
};
static void rcar_can_rx_pkt(struct rcar_can_priv *priv)

5
drivers/net/can/sja1000/kvaser_pci.c
View File

@ -214,7 +214,7 @@ static int kvaser_pci_add_chan(struct pci_dev *pdev, int channel,
struct net_device *dev;
struct sja1000_priv *priv;
struct kvaser_pci *board;
int err, init_step;
int err;
dev = alloc_sja1000dev(sizeof(struct kvaser_pci));
if (dev == NULL)
@ -235,7 +235,6 @@ static int kvaser_pci_add_chan(struct pci_dev *pdev, int channel,
if (channel == 0) {
board->xilinx_ver =
ioread8(board->res_addr + XILINX_VERINT) >> 4;
init_step = 2;
/* Assert PTADR# - we're in passive mode so the other bits are
not important */
@ -264,8 +263,6 @@ static int kvaser_pci_add_chan(struct pci_dev *pdev, int channel,
priv->irq_flags = IRQF_SHARED;
dev->irq = pdev->irq;
init_step = 4;
dev_info(&pdev->dev, "reg_base=%p conf_addr=%p irq=%d\n",
priv->reg_base, board->conf_addr, dev->irq);

3
drivers/net/can/usb/ems_usb.c
View File

@ -434,10 +434,9 @@ static void ems_usb_read_bulk_callback(struct urb *urb)
if (urb->actual_length > CPC_HEADER_SIZE) {
struct ems_cpc_msg *msg;
u8 *ibuf = urb->transfer_buffer;
u8 msg_count, again, start;
u8 msg_count, start;
msg_count = ibuf[0] & ~0x80;
again = ibuf[0] & 0x80;
start = CPC_HEADER_SIZE;

3
drivers/net/can/usb/esd_usb2.c
View File

@ -464,7 +464,6 @@ static void esd_usb2_write_bulk_callback(struct urb *urb)
{
struct esd_tx_urb_context *context = urb->context;
struct esd_usb2_net_priv *priv;
struct esd_usb2 *dev;
struct net_device *netdev;
size_t size = sizeof(struct esd_usb2_msg);
@ -472,7 +471,6 @@ static void esd_usb2_write_bulk_callback(struct urb *urb)
priv = context->priv;
netdev = priv->netdev;
dev = priv->usb2;
/* free up our allocated buffer */
usb_free_coherent(urb->dev, size,
@ -1143,6 +1141,7 @@ static void esd_usb2_disconnect(struct usb_interface *intf)
}
}
unlink_all_urbs(dev);
kfree(dev);
}
}

1
drivers/net/can/usb/gs_usb.c
View File

@ -718,6 +718,7 @@ static const struct net_device_ops gs_usb_netdev_ops = {
.ndo_open = gs_can_open,
.ndo_stop = gs_can_close,
.ndo_start_xmit = gs_can_start_xmit,
.ndo_change_mtu = can_change_mtu,
};
static struct gs_can *gs_make_candev(unsigned int channel, struct usb_interface *intf)

4
drivers/net/can/xilinx_can.c
View File

@ -300,7 +300,8 @@ static int xcan_set_bittiming(struct net_device *ndev)
static int xcan_chip_start(struct net_device *ndev)
{
struct xcan_priv *priv = netdev_priv(ndev);
u32 err, reg_msr, reg_sr_mask;
u32 reg_msr, reg_sr_mask;
int err;
unsigned long timeout;
/* Check if it is in reset mode */
@ -961,6 +962,7 @@ static const struct net_device_ops xcan_netdev_ops = {
.ndo_open = xcan_open,
.ndo_stop = xcan_close,
.ndo_start_xmit = xcan_start_xmit,
.ndo_change_mtu = can_change_mtu,
};
/**

2
drivers/net/ethernet/chelsio/cxgb4/cxgb4_dcb.c
View File

@ -1082,7 +1082,7 @@ static int cxgb4_cee_peer_getpg(struct net_device *dev, struct cee_pg *pg)
pgid = be32_to_cpu(pcmd.u.dcb.pgid.pgid);
for (i = 0; i < CXGB4_MAX_PRIORITY; i++)
pg->prio_pg[i] = (pgid >> (i * 4)) & 0xF;
pg->prio_pg[7 - i] = (pgid >> (i * 4)) & 0xF;
INIT_PORT_DCB_READ_PEER_CMD(pcmd, pi->port_id);
pcmd.u.dcb.pgrate.type = FW_PORT_DCB_TYPE_PGRATE;

6
drivers/net/ethernet/emulex/benet/be_main.c
View File

@ -4421,6 +4421,11 @@ static void be_del_vxlan_port(struct net_device *netdev, sa_family_t sa_family,
"Disabled VxLAN offloads for UDP port %d\n",
be16_to_cpu(port));
}
static bool be_gso_check(struct sk_buff *skb, struct net_device *dev)
{
return vxlan_gso_check(skb);
}
#endif
static const struct net_device_ops be_netdev_ops = {
@ -4450,6 +4455,7 @@ static const struct net_device_ops be_netdev_ops = {
#ifdef CONFIG_BE2NET_VXLAN
.ndo_add_vxlan_port = be_add_vxlan_port,
.ndo_del_vxlan_port = be_del_vxlan_port,
.ndo_gso_check = be_gso_check,
#endif
};

13
drivers/net/ethernet/mellanox/mlx4/en_netdev.c
View File

@ -1693,7 +1693,7 @@ int mlx4_en_start_port(struct net_device *dev)
mlx4_set_stats_bitmap(mdev->dev, &priv->stats_bitmap);
#ifdef CONFIG_MLX4_EN_VXLAN
if (priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_VXLAN_OFFLOADS)
if (priv->mdev->dev->caps.tunnel_offload_mode == MLX4_TUNNEL_OFFLOAD_MODE_VXLAN)
vxlan_get_rx_port(dev);
#endif
priv->port_up = true;
@ -2355,6 +2355,11 @@ static void mlx4_en_del_vxlan_port(struct net_device *dev,
queue_work(priv->mdev->workqueue, &priv->vxlan_del_task);
}
static bool mlx4_en_gso_check(struct sk_buff *skb, struct net_device *dev)
{
return vxlan_gso_check(skb);
}
#endif
static const struct net_device_ops mlx4_netdev_ops = {
@ -2386,6 +2391,7 @@ static const struct net_device_ops mlx4_netdev_ops = {
#ifdef CONFIG_MLX4_EN_VXLAN
.ndo_add_vxlan_port = mlx4_en_add_vxlan_port,
.ndo_del_vxlan_port = mlx4_en_del_vxlan_port,
.ndo_gso_check = mlx4_en_gso_check,
#endif
};
@ -2416,6 +2422,11 @@ static const struct net_device_ops mlx4_netdev_ops_master = {
.ndo_rx_flow_steer = mlx4_en_filter_rfs,
#endif
.ndo_get_phys_port_id = mlx4_en_get_phys_port_id,
#ifdef CONFIG_MLX4_EN_VXLAN
.ndo_add_vxlan_port = mlx4_en_add_vxlan_port,
.ndo_del_vxlan_port = mlx4_en_del_vxlan_port,
.ndo_gso_check = mlx4_en_gso_check,
#endif
};
int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,

6
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
View File

@ -503,6 +503,11 @@ static void qlcnic_del_vxlan_port(struct net_device *netdev,
adapter->flags |= QLCNIC_DEL_VXLAN_PORT;
}
static bool qlcnic_gso_check(struct sk_buff *skb, struct net_device *dev)
{
return vxlan_gso_check(skb);
}
#endif
static const struct net_device_ops qlcnic_netdev_ops = {
@ -526,6 +531,7 @@ static const struct net_device_ops qlcnic_netdev_ops = {
#ifdef CONFIG_QLCNIC_VXLAN
.ndo_add_vxlan_port = qlcnic_add_vxlan_port,
.ndo_del_vxlan_port = qlcnic_del_vxlan_port,
.ndo_gso_check = qlcnic_gso_check,
#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = qlcnic_poll_controller,

6
drivers/net/ethernet/ti/cpsw.c
View File

@ -129,9 +129,9 @@ do { \
#define CPSW_VLAN_AWARE BIT(1)
#define CPSW_ALE_VLAN_AWARE 1
#define CPSW_FIFO_NORMAL_MODE (0 << 15)
#define CPSW_FIFO_DUAL_MAC_MODE (1 << 15)
#define CPSW_FIFO_RATE_LIMIT_MODE (2 << 15)
#define CPSW_FIFO_NORMAL_MODE (0 << 16)
#define CPSW_FIFO_DUAL_MAC_MODE (1 << 16)
#define CPSW_FIFO_RATE_LIMIT_MODE (2 << 16)
#define CPSW_INTPACEEN (0x3f << 16)
#define CPSW_INTPRESCALE_MASK (0x7FF << 0)

13
drivers/net/ieee802154/fakehard.c
View File

@ -377,17 +377,20 @@ static int ieee802154fake_probe(struct platform_device *pdev)
err = wpan_phy_register(phy);
if (err)
goto out;
goto err_phy_reg;
err = register_netdev(dev);
if (err < 0)
goto out;
if (err)
goto err_netdev_reg;
dev_info(&pdev->dev, "Added ieee802154 HardMAC hardware\n");
return 0;
out:
unregister_netdev(dev);
err_netdev_reg:
wpan_phy_unregister(phy);
err_phy_reg:
free_netdev(dev);
wpan_phy_free(phy);
return err;
}

4
drivers/net/ppp/pptp.c
View File

@ -506,7 +506,9 @@ static int pptp_getname(struct socket *sock, struct sockaddr *uaddr,
int len = sizeof(struct sockaddr_pppox);
struct sockaddr_pppox sp;
sp.sa_family = AF_PPPOX;
memset(&sp.sa_addr, 0, sizeof(sp.sa_addr));
sp.sa_family = AF_PPPOX;
sp.sa_protocol = PX_PROTO_PPTP;
sp.sa_addr.pptp = pppox_sk(sock->sk)->proto.pptp.src_addr;

Some files were not shown because too many files have changed in this diff Show More