hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

spi: spi-bfin5xx: Calculate transfer speed unconditionally 

SPI core validates the transfer speed and defaults to spi->max_speed_hz in
case the transfer speed is not set so code here won't use the
chip->baud value (which is derived from spi->max_speed_hz).

Please note driver uses chip->baud at the beginning of message transmission
by calling the bfin_spi_restore_state() but then programs per transfer
speed in bfin_spi_pump_transfers(). I'm not familiar with the HW so I don't
know would it be possible to remove chip->baud completely by either using
constant value in bfin_spi_restore_state() or by removing the baud register
write there.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit is contained in:
Jarkko Nikula 2015-09-15 16:26:17 +03:00 committed by Mark Brown
parent 6ff33f3902
commit 95a8fde23e
1 changed files with 1 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
drivers/spi/spi-bfin5xx.c
View File

@ -661,11 +661,7 @@ static void bfin_spi_pump_transfers(unsigned long data)
message->state = RUNNING_STATE;
dma_config = 0;
/* Speed setup (surely valid because already checked) */
if (transfer->speed_hz)
bfin_write(&drv_data->regs->baud, hz_to_spi_baud(transfer->speed_hz));
else
bfin_write(&drv_data->regs->baud, chip->baud);
bfin_write(&drv_data->regs->baud, hz_to_spi_baud(transfer->speed_hz));
bfin_write(&drv_data->regs->stat, BIT_STAT_CLR);
bfin_spi_cs_active(drv_data, chip);