Qualcomm ARM Based Device Tree Updates for v4.6
* Add documentation for Kryo * Add RPMCC node for APQ8064 * Updates for MSM8974 * Add board clocks * Add support for Nexus7 device * Fixup pmic reg properties * Various updates/cleanups for APQ8064 based boards -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJW0K5bAAoJEFKiBbHx2RXVj9wP/107kSXTR29qp4/NuKdnoyim UEOx54h1hqDEV9u+1BzRYL9TeCjzefnIkltc432ol1YJ/3DfyzsSA/eKDcPuYmh3 6NYEMfqHxsjsx6hROm4+DCWssKlnRiw15F3zNtVUlqSQZHY+Aa/vFjd18nxI+egt wmLHCdQmC+1MwCPZ1FF78PvWOtTlRbg6m/4/4/UwUXLQhPydyIk6U4lAQQfF638P fLjrldOWxzGQ+9LHX7ZA7jDrAoJcFhZtcl5gHa4LcNf/yCP49OLm6HyzmEEUffyQ kN5aNCJhoSVtm+ig2OeBHzISiTFVVe04xDgHR7Qi4wT5Ms2/GyNx/2Xl181OmqVK lHCorD650VaKp4Zta/FD0c10PuklHP4SyJnz0RBjg/67Z8bCds8UmCxzC/q2K8FJ 8r14oeq9HWcVE3ujwGUGETXOCWEjwMNzzSa/SFso3WmqUbFD+X0/VqNSR+6vvPMz w7k2sKSkSCnQFXHXO7s8QOkP2+lePZ+LqGuWTvOa1Jh7LBAFDoTgFUtZCERc2gm8 3cnDpepXkjQFNKCahoc2y//j6OzhOW/vkHEDPJJNR2GELv+LgRSw7MT2x4FpSsfT 6Ejkq87vJqesV/GPwQu8YITEckiRfCs16geL6wTrJhTziMRlk35t5hdIjTx/seKU IPe4oV4zRH+4jcS3b0mw =TpOo -----END PGP SIGNATURE----- Merge tag 'qcom-dt-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Merge "Qualcomm ARM Based Device Tree Updates for v4.6" from Andy Gross: * Add documentation for Kryo * Add RPMCC node for APQ8064 * Updates for MSM8974 * Add board clocks * Add support for Nexus7 device * Fixup pmic reg properties * Various updates/cleanups for APQ8064 based boards * tag 'qcom-dt-for-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (23 commits) ARM: dts: ifc6410: add correct aliases to the i2c and spi bus ARM: dts: apq8064: add i2c6 device node. ARM: dts: ifc6410: enable cam i2c device ARM: dts: apq8064: add gsbi4 with i2c node. ARM: dts: apq8064: add missing i2c2 pinctrl info ARM: dts: ifc6410: enable spi device on expansion ARM: dts: apq8064: add spi5 device node. ARM: dts: apq8064: add i2c sleep pinctrl states. ARM: dts: apq8064: add pci support in CM QS600 ARM: dts: apq8064: move pinctrls to dedicated dtsi ARM: dts: qcom: fix i2c lables to be inline with others dts: msm8974: Add dma channels for blsp2_i2c1 node dts: msm8974: Add blsp2_bam dma node ARM: dts: qcom: Remove size elements from pmic reg properties devicetree: bindings: Document qcom board compatible format devicetree: Add DTS file to support the Nexus7 2013 (flo) device. devicetree: qcom-apq8064.dtsi: Add i2c3 address-cells and size-cells values arm: dts: qcom: Add more board clocks ARM: dts: qcom: msm8974: Add WCNSS SMP2P node ARM: dts: qcom: msm8974: Add smsm node ...
This commit is contained in:
Arnd Bergmann
commit
953a400ac2
|
|
@ -178,6 +178,7 @@ nodes to be present and contain the properties described below.
|
|||
"marvell,sheeva-v5"
|
||||
"nvidia,tegra132-denver"
|
||||
"qcom,krait"
|
||||
"qcom,kryo"
|
||||
"qcom,scorpion"
|
||||
- enable-method
|
||||
Value type: <stringlist>
|
||||
|
|
|
|||
|
|
@ -0,0 +1,51 @@
|
|||
QCOM device tree bindings
|
||||
-------------------------
|
||||
|
||||
Some qcom based bootloaders identify the dtb blob based on a set of
|
||||
device properties like SoC and platform and revisions of those components.
|
||||
To support this scheme, we encode this information into the board compatible
|
||||
string.
|
||||
|
||||
Each board must specify a top-level board compatible string with the following
|
||||
format:
|
||||
|
||||
compatible = "qcom,<SoC>[-<soc_version>][-<foundry_id>]-<board>[/<subtype>][-<board_version>]"
|
||||
|
||||
The 'SoC' and 'board' elements are required. All other elements are optional.
|
||||
|
||||
The 'SoC' element must be one of the following strings:
|
||||
|
||||
apq8016
|
||||
apq8074
|
||||
apq8084
|
||||
apq8096
|
||||
msm8916
|
||||
msm8974
|
||||
msm8996
|
||||
|
||||
The 'board' element must be one of the following strings:
|
||||
|
||||
cdp
|
||||
liquid
|
||||
dragonboard
|
||||
mtp
|
||||
sbc
|
||||
|
||||
The 'soc_version' and 'board_version' elements take the form of v<Major>.<Minor>
|
||||
where the minor number may be omitted when it's zero, i.e. v1.0 is the same
|
||||
as v1. If all versions of the 'board_version' elements match, then a
|
||||
wildcard '*' should be used, e.g. 'v*'.
|
||||
|
||||
The 'foundry_id' and 'subtype' elements are one or more digits from 0 to 9.
|
||||
|
||||
Examples:
|
||||
|
||||
"qcom,msm8916-v1-cdp-pm8916-v2.1"
|
||||
|
||||
A CDP board with an msm8916 SoC, version 1 paired with a pm8916 PMIC of version
|
||||
2.1.
|
||||
|
||||
"qcom,apq8074-v2.0-2-dragonboard/1-v0.1"
|
||||
|
||||
A dragonboard board v0.1 of subtype 1 with an apq8074 SoC version 2, made in
|
||||
foundry 2.
|
||||
|
|
@ -533,6 +533,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
|
|||
qcom-apq8064-cm-qs600.dtb \
|
||||
qcom-apq8064-ifc6410.dtb \
|
||||
qcom-apq8064-sony-xperia-yuga.dtb \
|
||||
qcom-apq8064-asus-nexus7-flo.dtb \
|
||||
qcom-apq8074-dragonboard.dtb \
|
||||
qcom-apq8084-ifc6540.dtb \
|
||||
qcom-apq8084-mtp.dtb \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,276 @@
|
|||
#include "qcom-apq8064-v2.0.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
||||
/ {
|
||||
model = "Asus Nexus7(flo)";
|
||||
compatible = "asus,nexus7-flo", "qcom,apq8064";
|
||||
|
||||
aliases {
|
||||
serial0 = &gsbi7_serial;
|
||||
serial1 = &gsbi6_serial;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
ext_3p3v: regulator-fixed@1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "ext_3p3v";
|
||||
regulator-type = "voltage";
|
||||
startup-delay-us = <0>;
|
||||
gpio = <&tlmm_pinmux 77 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
power {
|
||||
label = "Power";
|
||||
gpios = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_POWER>;
|
||||
gpio-key,wakeup;
|
||||
};
|
||||
volume_up {
|
||||
label = "Volume Up";
|
||||
gpios = <&pm8921_gpio 4 GPIO_ACTIVE_HIGH>;
|
||||
linux,code = <KEY_VOLUMEUP>;
|
||||
};
|
||||
volume_down {
|
||||
label = "Volume Down";
|
||||
gpios = <&pm8921_gpio 38 GPIO_ACTIVE_HIGH>;
|
||||
linux,code = <KEY_VOLUMEDOWN>;
|
||||
};
|
||||
};
|
||||
|
||||
soc {
|
||||
rpm@108000 {
|
||||
regulators {
|
||||
vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
|
||||
vin_lvs1_3_6-supply = <&pm8921_s4>;
|
||||
vin_lvs4_5_7-supply = <&pm8921_s4>;
|
||||
|
||||
|
||||
vdd_l24-supply = <&pm8921_s1>;
|
||||
vdd_l25-supply = <&pm8921_s1>;
|
||||
vin_lvs2-supply = <&pm8921_s1>;
|
||||
|
||||
vdd_l26-supply = <&pm8921_s7>;
|
||||
vdd_l27-supply = <&pm8921_s7>;
|
||||
vdd_l28-supply = <&pm8921_s7>;
|
||||
|
||||
vdd_ncp-supply = <&pm8921_l6>;
|
||||
|
||||
/* Buck SMPS */
|
||||
s1 {
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1225000>;
|
||||
regulator-max-microvolt = <1225000>;
|
||||
qcom,switch-mode-frequency = <3200000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
/* msm otg HSUSB_VDDCX */
|
||||
s3 {
|
||||
regulator-min-microvolt = <500000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
qcom,switch-mode-frequency = <4800000>;
|
||||
};
|
||||
|
||||
/*
|
||||
* msm_sdcc.1-sdc-vdd_io
|
||||
* tabla2x-slim-CDC_VDDA_RX
|
||||
* tabla2x-slim-CDC_VDDA_TX
|
||||
* tabla2x-slim-CDC_VDD_CP
|
||||
* tabla2x-slim-VDDIO_CDC
|
||||
*/
|
||||
s4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
qcom,switch-mode-frequency = <3200000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
s7 {
|
||||
regulator-min-microvolt = <1300000>;
|
||||
regulator-max-microvolt = <1300000>;
|
||||
qcom,switch-mode-frequency = <3200000>;
|
||||
};
|
||||
|
||||
/* mipi_dsi.1-dsi1_pll_vdda */
|
||||
l2 {
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
/* msm_otg-HSUSB_3p3 */
|
||||
l3 {
|
||||
regulator-min-microvolt = <3075000>;
|
||||
regulator-max-microvolt = <3075000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
/* msm_otg-HSUSB_1p8 */
|
||||
l4 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
/* msm_sdcc.1-sdc_vdd */
|
||||
l5 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
regulator-always-on;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
l6 {
|
||||
regulator-min-microvolt = <2950000>;
|
||||
regulator-max-microvolt = <2950000>;
|
||||
};
|
||||
|
||||
/* mipi_dsi.1-dsi1_avdd */
|
||||
l11 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
/* pwm_power for backlight */
|
||||
l17 {
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3600000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
/* camera, qdsp6 */
|
||||
l23 {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
/*
|
||||
* tabla2x-slim-CDC_VDDA_A_1P2V
|
||||
* tabla2x-slim-VDDD_CDC_D
|
||||
*/
|
||||
l25 {
|
||||
regulator-min-microvolt = <1250000>;
|
||||
regulator-max-microvolt = <1250000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
lvs1 {
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
lvs4 {
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
lvs5 {
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
lvs6 {
|
||||
bias-pull-down;
|
||||
};
|
||||
/*
|
||||
* mipi_dsi.1-dsi1_vddio
|
||||
* pil_riva-pll_vdd
|
||||
*/
|
||||
lvs7 {
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gsbi@16200000 {
|
||||
status = "okay";
|
||||
qcom,mode = <GSBI_PROT_I2C>;
|
||||
i2c@16280000 {
|
||||
status = "okay";
|
||||
clock-frequency = <200000>;
|
||||
pinctrl-0 = <&i2c3_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
trackpad@10 {
|
||||
compatible = "elan,ekth3500";
|
||||
reg = <0x10>;
|
||||
interrupt-parent = <&tlmm_pinmux>;
|
||||
interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
gsbi@12440000 {
|
||||
status = "okay";
|
||||
qcom,mode = <GSBI_PROT_I2C>;
|
||||
|
||||
i2c@12460000 {
|
||||
status = "okay";
|
||||
clock-frequency = <200000>;
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
eeprom@52 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x52>;
|
||||
pagesize = <32>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
gsbi@16500000 {
|
||||
status = "ok";
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
|
||||
serial@16540000 {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&gsbi6_uart_4pins>;
|
||||
};
|
||||
};
|
||||
|
||||
gsbi@16600000 {
|
||||
status = "ok";
|
||||
qcom,mode = <GSBI_PROT_I2C_UART>;
|
||||
serial@16640000 {
|
||||
status = "ok";
|
||||
};
|
||||
};
|
||||
|
||||
/* OTG */
|
||||
phy@12500000 {
|
||||
status = "okay";
|
||||
vddcx-supply = <&pm8921_s3>;
|
||||
v3p3-supply = <&pm8921_l3>;
|
||||
v1p8-supply = <&pm8921_l4>;
|
||||
};
|
||||
|
||||
gadget@12500000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* OTG */
|
||||
usb@12500000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
amba {
|
||||
/* eMMC */
|
||||
sdcc@12400000 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&pm8921_l5>;
|
||||
vqmmc-supply = <&pm8921_s4>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -37,6 +37,18 @@
|
|||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
pcie_pins: pcie_pinmux {
|
||||
mux {
|
||||
pins = "gpio27";
|
||||
function = "gpio";
|
||||
};
|
||||
conf {
|
||||
pins = "gpio27";
|
||||
drive-strength = <12>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
rpm@108000 {
|
||||
|
|
@ -103,6 +115,11 @@
|
|||
regulator-max-microvolt = <1900000>;
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
pm8921_lvs6: lvs6 {
|
||||
bias-pull-down;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -195,6 +212,16 @@
|
|||
};
|
||||
};
|
||||
|
||||
pci@1b500000 {
|
||||
status = "ok";
|
||||
vdda-supply = <&pm8921_s3>;
|
||||
vdda_phy-supply = <&pm8921_lvs6>;
|
||||
vdda_refclk-supply = <&v3p3_fixed>;
|
||||
pinctrl-0 = <&pcie_pins>;
|
||||
pinctrl-names = "default";
|
||||
perst-gpio = <&tlmm_pinmux 27 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
amba {
|
||||
/* eMMC */
|
||||
sdcc1: sdcc@12400000 {
|
||||
|
|
|
|||
|
|
@ -9,6 +9,11 @@
|
|||
aliases {
|
||||
serial0 = &gsbi7_serial;
|
||||
serial1 = &gsbi6_serial;
|
||||
i2c0 = &gsbi1_i2c;
|
||||
i2c1 = &gsbi2_i2c;
|
||||
i2c2 = &gsbi3_i2c;
|
||||
i2c3 = &gsbi4_i2c;
|
||||
spi0 = &gsbi5_spi;
|
||||
};
|
||||
|
||||
chosen {
|
||||
|
|
@ -157,7 +162,16 @@
|
|||
gsbi3: gsbi@16200000 {
|
||||
status = "okay";
|
||||
qcom,mode = <GSBI_PROT_I2C>;
|
||||
i2c3: i2c@16280000 {
|
||||
i2c@16280000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
gsbi@16300000 {
|
||||
status = "okay";
|
||||
qcom,mode = <GSBI_PROT_I2C>;
|
||||
/* CAM I2C MIPI-CSI connector */
|
||||
i2c@16380000 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
|
@ -178,6 +192,16 @@
|
|||
};
|
||||
};
|
||||
|
||||
gsbi@1a200000 {
|
||||
qcom,mode = <GSBI_PROT_SPI>;
|
||||
status = "okay";
|
||||
spi4: spi@1a280000 {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
cs-gpios = <&tlmm_pinmux 53 0>;
|
||||
};
|
||||
};
|
||||
|
||||
gsbi@16500000 {
|
||||
status = "ok";
|
||||
qcom,mode = <GSBI_PROT_UART_W_FC>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,208 @@
|
|||
|
||||
&tlmm_pinmux {
|
||||
sdc4_gpios: sdc4-gpios {
|
||||
pios {
|
||||
pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
|
||||
function = "sdc4";
|
||||
};
|
||||
};
|
||||
|
||||
ps_hold: ps_hold {
|
||||
mux {
|
||||
pins = "gpio78";
|
||||
function = "ps_hold";
|
||||
};
|
||||
};
|
||||
|
||||
i2c1_pins: i2c1 {
|
||||
mux {
|
||||
pins = "gpio20", "gpio21";
|
||||
function = "gsbi1";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio20", "gpio21";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c1_pins_sleep: i2c1_pins_sleep {
|
||||
mux {
|
||||
pins = "gpio20", "gpio21";
|
||||
function = "gpio";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio20", "gpio21";
|
||||
drive-strength = <2>;
|
||||
bias-disable = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c2_pins: i2c2 {
|
||||
mux {
|
||||
pins = "gpio24", "gpio25";
|
||||
function = "gsbi2";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio24", "gpio25";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c2_pins_sleep: i2c2_pins_sleep {
|
||||
mux {
|
||||
pins = "gpio24", "gpio25";
|
||||
function = "gpio";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio24", "gpio25";
|
||||
drive-strength = <2>;
|
||||
bias-disable = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c3_pins: i2c3 {
|
||||
mux {
|
||||
pins = "gpio8", "gpio9";
|
||||
function = "gsbi3";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio8", "gpio9";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c3_pins_sleep: i2c3_pins_sleep {
|
||||
mux {
|
||||
pins = "gpio8", "gpio9";
|
||||
function = "gpio";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio8", "gpio9";
|
||||
drive-strength = <2>;
|
||||
bias-disable = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c4_pins: i2c4 {
|
||||
mux {
|
||||
pins = "gpio12", "gpio13";
|
||||
function = "gsbi4";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio12", "gpio13";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c4_pins_sleep: i2c4_pins_sleep {
|
||||
mux {
|
||||
pins = "gpio12", "gpio13";
|
||||
function = "gpio";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio12", "gpio13";
|
||||
drive-strength = <2>;
|
||||
bias-disable = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
spi5_default: spi5_default {
|
||||
pinmux {
|
||||
pins = "gpio51", "gpio52", "gpio54";
|
||||
function = "gsbi5";
|
||||
};
|
||||
|
||||
pinmux_cs {
|
||||
function = "gpio";
|
||||
pins = "gpio53";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio51", "gpio52", "gpio54";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinconf_cs {
|
||||
pins = "gpio53";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
spi5_sleep: spi5_sleep {
|
||||
pinmux {
|
||||
function = "gpio";
|
||||
pins = "gpio51", "gpio52", "gpio53", "gpio54";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio51", "gpio52", "gpio53", "gpio54";
|
||||
drive-strength = <2>;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
i2c6_pins: i2c6 {
|
||||
mux {
|
||||
pins = "gpio16", "gpio17";
|
||||
function = "gsbi6";
|
||||
};
|
||||
|
||||
pinconf {
|
||||
pins = "gpio16", "gpio17";
|
||||
drive-strength = <16>;
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
i2c6_pins_sleep: i2c6_pins_sleep {
|
||||
mux {
|
||||
pins = "gpio16", "gpio17";
|
||||
function = "gpio";
|
||||
};
|
||||
pinconf {
|
||||
pins = "gpio16", "gpio17";
|
||||
drive-strength = <2>;
|
||||
bias-disable = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
gsbi6_uart_2pins: gsbi6_uart_2pins {
|
||||
mux {
|
||||
pins = "gpio14", "gpio15";
|
||||
function = "gsbi6";
|
||||
};
|
||||
};
|
||||
|
||||
gsbi6_uart_4pins: gsbi6_uart_4pins {
|
||||
mux {
|
||||
pins = "gpio14", "gpio15", "gpio16", "gpio17";
|
||||
function = "gsbi6";
|
||||
};
|
||||
};
|
||||
|
||||
gsbi7_uart_2pins: gsbi7_uart_2pins {
|
||||
mux {
|
||||
pins = "gpio82", "gpio83";
|
||||
function = "gsbi7";
|
||||
};
|
||||
};
|
||||
|
||||
gsbi7_uart_4pins: gsbi7_uart_4pins {
|
||||
mux {
|
||||
pins = "gpio82", "gpio83", "gpio84", "gpio85";
|
||||
function = "gsbi7";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -142,62 +142,6 @@
|
|||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ps_hold>;
|
||||
|
||||
sdc4_gpios: sdc4-gpios {
|
||||
pios {
|
||||
pins = "gpio63", "gpio64", "gpio65", "gpio66", "gpio67", "gpio68";
|
||||
function = "sdc4";
|
||||
};
|
||||
};
|
||||
|
||||
ps_hold: ps_hold {
|
||||
mux {
|
||||
pins = "gpio78";
|
||||
function = "ps_hold";
|
||||
};
|
||||
};
|
||||
|
||||
i2c1_pins: i2c1 {
|
||||
mux {
|
||||
pins = "gpio20", "gpio21";
|
||||
function = "gsbi1";
|
||||
};
|
||||
};
|
||||
|
||||
i2c3_pins: i2c3 {
|
||||
mux {
|
||||
pins = "gpio8", "gpio9";
|
||||
function = "gsbi3";
|
||||
};
|
||||
};
|
||||
|
||||
gsbi6_uart_2pins: gsbi6_uart_2pins {
|
||||
mux {
|
||||
pins = "gpio14", "gpio15";
|
||||
function = "gsbi6";
|
||||
};
|
||||
};
|
||||
|
||||
gsbi6_uart_4pins: gsbi6_uart_4pins {
|
||||
mux {
|
||||
pins = "gpio14", "gpio15", "gpio16", "gpio17";
|
||||
function = "gsbi6";
|
||||
};
|
||||
};
|
||||
|
||||
gsbi7_uart_2pins: gsbi7_uart_2pins {
|
||||
mux {
|
||||
pins = "gpio82", "gpio83";
|
||||
function = "gsbi7";
|
||||
};
|
||||
};
|
||||
|
||||
gsbi7_uart_4pins: gsbi7_uart_4pins {
|
||||
mux {
|
||||
pins = "gpio82", "gpio83", "gpio84", "gpio85";
|
||||
function = "gsbi7";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sfpb_wrapper_mutex: syscon@1200000 {
|
||||
|
|
@ -281,10 +225,10 @@
|
|||
|
||||
syscon-tcsr = <&tcsr>;
|
||||
|
||||
i2c1: i2c@12460000 {
|
||||
gsbi1_i2c: i2c@12460000 {
|
||||
compatible = "qcom,i2c-qup-v1.1.1";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins &i2c1_pins_sleep>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
reg = <0x12460000 0x1000>;
|
||||
interrupts = <0 194 IRQ_TYPE_NONE>;
|
||||
clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
|
||||
|
|
@ -292,6 +236,7 @@
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
gsbi2: gsbi@12480000 {
|
||||
|
|
@ -307,9 +252,11 @@
|
|||
|
||||
syscon-tcsr = <&tcsr>;
|
||||
|
||||
i2c2: i2c@124a0000 {
|
||||
gsbi2_i2c: i2c@124a0000 {
|
||||
compatible = "qcom,i2c-qup-v1.1.1";
|
||||
reg = <0x124a0000 0x1000>;
|
||||
pinctrl-0 = <&i2c2_pins &i2c2_pins_sleep>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
interrupts = <0 196 IRQ_TYPE_NONE>;
|
||||
clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
|
|
@ -328,15 +275,40 @@
|
|||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
i2c3: i2c@16280000 {
|
||||
gsbi3_i2c: i2c@16280000 {
|
||||
compatible = "qcom,i2c-qup-v1.1.1";
|
||||
pinctrl-0 = <&i2c3_pins>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c3_pins &i2c3_pins_sleep>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
reg = <0x16280000 0x1000>;
|
||||
interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
|
||||
clocks = <&gcc GSBI3_QUP_CLK>,
|
||||
<&gcc GSBI3_H_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
gsbi4: gsbi@16300000 {
|
||||
status = "disabled";
|
||||
compatible = "qcom,gsbi-v1.0.0";
|
||||
cell-index = <4>;
|
||||
reg = <0x16300000 0x03>;
|
||||
clocks = <&gcc GSBI4_H_CLK>;
|
||||
clock-names = "iface";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
gsbi4_i2c: i2c@16380000 {
|
||||
compatible = "qcom,i2c-qup-v1.1.1";
|
||||
pinctrl-0 = <&i2c4_pins &i2c4_pins_sleep>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
reg = <0x16380000 0x1000>;
|
||||
interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
|
||||
clocks = <&gcc GSBI4_QUP_CLK>,
|
||||
<&gcc GSBI4_H_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -360,6 +332,19 @@
|
|||
clock-names = "core", "iface";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gsbi5_spi: spi@1a280000 {
|
||||
compatible = "qcom,spi-qup-v1.1.1";
|
||||
reg = <0x1a280000 0x1000>;
|
||||
interrupts = <0 155 0>;
|
||||
pinctrl-0 = <&spi5_default &spi5_sleep>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
status = "disabled";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
gsbi6: gsbi@16500000 {
|
||||
|
|
@ -382,6 +367,17 @@
|
|||
clock-names = "core", "iface";
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gsbi6_i2c: i2c@16580000 {
|
||||
compatible = "qcom,i2c-qup-v1.1.1";
|
||||
pinctrl-0 = <&i2c6_pins &i2c6_pins_sleep>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
reg = <0x16580000 0x1000>;
|
||||
interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
|
||||
clocks = <&gcc GSBI6_QUP_CLK>,
|
||||
<&gcc GSBI6_H_CLK>;
|
||||
clock-names = "core", "iface";
|
||||
};
|
||||
};
|
||||
|
||||
gsbi7: gsbi@16600000 {
|
||||
|
|
@ -521,6 +517,11 @@
|
|||
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
|
||||
interrupt-names = "ack", "err", "wakeup";
|
||||
|
||||
rpmcc: clock-controller {
|
||||
compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc";
|
||||
#clock-cells = <1>;
|
||||
};
|
||||
|
||||
regulators {
|
||||
compatible = "qcom,rpm-pm8921-regulators";
|
||||
|
||||
|
|
@ -823,3 +824,4 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
#include "qcom-apq8064-pins.dtsi"
|
||||
|
|
|
|||
|
|
@ -91,6 +91,20 @@
|
|||
interrupts = <1 7 0xf04>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
xo_board {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <19200000>;
|
||||
};
|
||||
|
||||
sleep_clk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv7-timer";
|
||||
interrupts = <1 2 0xf08>,
|
||||
|
|
|
|||
|
|
@ -62,6 +62,18 @@
|
|||
};
|
||||
|
||||
clocks {
|
||||
cxo_board {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <19200000>;
|
||||
};
|
||||
|
||||
pxo_board {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <27000000>;
|
||||
};
|
||||
|
||||
sleep_clk: sleep_clk {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <32768>;
|
||||
|
|
|
|||
|
|
@ -42,6 +42,26 @@
|
|||
interrupts = <1 9 0x304>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
cxo_board {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <19200000>;
|
||||
};
|
||||
|
||||
pxo_board {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <27000000>;
|
||||
};
|
||||
|
||||
sleep_clk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
};
|
||||
|
||||
soc: soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -1,6 +1,6 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
|
||||
#include "skeleton.dtsi"
|
||||
|
||||
|
|
@ -14,10 +14,50 @@
|
|||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
mpss@08000000 {
|
||||
reg = <0x08000000 0x5100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
mba@00d100000 {
|
||||
reg = <0x0d100000 0x100000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
reserved@0d200000 {
|
||||
reg = <0x0d200000 0xa00000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
adsp@0dc00000 {
|
||||
reg = <0x0dc00000 0x1900000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
venus@0f500000 {
|
||||
reg = <0x0f500000 0x500000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
smem_region: smem@fa00000 {
|
||||
reg = <0xfa00000 0x200000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
tz@0fc00000 {
|
||||
reg = <0x0fc00000 0x160000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
efs@0fd600000 {
|
||||
reg = <0x0fd60000 0x1a0000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
unused@0ff00000 {
|
||||
reg = <0x0ff00000 0x10100000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
cpus {
|
||||
|
|
@ -91,6 +131,20 @@
|
|||
interrupts = <1 7 0xf04>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
xo_board {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <19200000>;
|
||||
};
|
||||
|
||||
sleep_clk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv7-timer";
|
||||
interrupts = <1 2 0xf08>,
|
||||
|
|
@ -109,6 +163,73 @@
|
|||
hwlocks = <&tcsr_mutex 3>;
|
||||
};
|
||||
|
||||
smp2p-wcnss {
|
||||
compatible = "qcom,smp2p";
|
||||
qcom,smem = <451>, <431>;
|
||||
|
||||
interrupt-parent = <&intc>;
|
||||
interrupts = <0 143 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
qcom,ipc = <&apcs 8 18>;
|
||||
|
||||
qcom,local-pid = <0>;
|
||||
qcom,remote-pid = <4>;
|
||||
|
||||
wcnss_smp2p_out: master-kernel {
|
||||
qcom,entry-name = "master-kernel";
|
||||
|
||||
#qcom,state-cells = <1>;
|
||||
};
|
||||
|
||||
wcnss_smp2p_in: slave-kernel {
|
||||
qcom,entry-name = "slave-kernel";
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
smsm {
|
||||
compatible = "qcom,smsm";
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
qcom,ipc-1 = <&apcs 8 13>;
|
||||
qcom,ipc-2 = <&apcs 8 9>;
|
||||
qcom,ipc-3 = <&apcs 8 19>;
|
||||
|
||||
apps_smsm: apps@0 {
|
||||
reg = <0>;
|
||||
|
||||
#qcom,state-cells = <1>;
|
||||
};
|
||||
|
||||
modem_smsm: modem@1 {
|
||||
reg = <1>;
|
||||
interrupts = <0 26 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
adsp_smsm: adsp@2 {
|
||||
reg = <2>;
|
||||
interrupts = <0 157 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
wcnss_smsm: wcnss@7 {
|
||||
reg = <7>;
|
||||
interrupts = <0 144 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
soc: soc {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
|
@ -339,6 +460,8 @@
|
|||
clock-names = "core", "iface";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
|
||||
dma-names = "tx", "rx";
|
||||
};
|
||||
|
||||
spmi_bus: spmi@fc4cf000 {
|
||||
|
|
@ -356,6 +479,16 @@
|
|||
interrupt-controller;
|
||||
#interrupt-cells = <4>;
|
||||
};
|
||||
|
||||
blsp2_dma: dma-controller@f9944000 {
|
||||
compatible = "qcom,bam-v1.4.0";
|
||||
reg = <0xf9944000 0x19000>;
|
||||
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gcc GCC_BLSP2_AHB_CLK>;
|
||||
clock-names = "bam_clk";
|
||||
#dma-cells = <1>;
|
||||
qcom,ee = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
smd {
|
||||
|
|
|
|||
|
|
@ -11,7 +11,7 @@
|
|||
|
||||
pm8841_mpps: mpps@a000 {
|
||||
compatible = "qcom,pm8841-mpp", "qcom,spmi-mpp";
|
||||
reg = <0xa000 0x400>;
|
||||
reg = <0xa000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupts = <4 0xa0 0 IRQ_TYPE_NONE>,
|
||||
|
|
@ -22,7 +22,7 @@
|
|||
|
||||
temp-alarm@2400 {
|
||||
compatible = "qcom,spmi-temp-alarm";
|
||||
reg = <0x2400 0x100>;
|
||||
reg = <0x2400>;
|
||||
interrupts = <4 0x24 0 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -12,15 +12,15 @@
|
|||
|
||||
rtc@6000 {
|
||||
compatible = "qcom,pm8941-rtc";
|
||||
reg = <0x6000 0x100>,
|
||||
<0x6100 0x100>;
|
||||
reg = <0x6000>,
|
||||
<0x6100>;
|
||||
reg-names = "rtc", "alarm";
|
||||
interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
|
||||
pwrkey@800 {
|
||||
compatible = "qcom,pm8941-pwrkey";
|
||||
reg = <0x800 0x100>;
|
||||
reg = <0x800>;
|
||||
interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
|
||||
debounce = <15625>;
|
||||
bias-pull-up;
|
||||
|
|
@ -28,7 +28,7 @@
|
|||
|
||||
charger@1000 {
|
||||
compatible = "qcom,pm8941-charger";
|
||||
reg = <0x1000 0x700>;
|
||||
reg = <0x1000>;
|
||||
interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
|
||||
<0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
|
||||
<0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
|
||||
|
|
@ -49,7 +49,7 @@
|
|||
|
||||
pm8941_gpios: gpios@c000 {
|
||||
compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
|
||||
reg = <0xc000 0x2400>;
|
||||
reg = <0xc000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
|
||||
|
|
@ -92,7 +92,7 @@
|
|||
|
||||
pm8941_mpps: mpps@a000 {
|
||||
compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
|
||||
reg = <0xa000 0x800>;
|
||||
reg = <0xa000>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
|
||||
|
|
@ -107,7 +107,7 @@
|
|||
|
||||
pm8941_temp: temp-alarm@2400 {
|
||||
compatible = "qcom,spmi-temp-alarm";
|
||||
reg = <0x2400 0x100>;
|
||||
reg = <0x2400>;
|
||||
interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
|
||||
io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
|
||||
io-channel-names = "thermal";
|
||||
|
|
@ -116,7 +116,7 @@
|
|||
|
||||
pm8941_vadc: vadc@3100 {
|
||||
compatible = "qcom,spmi-vadc";
|
||||
reg = <0x3100 0x100>;
|
||||
reg = <0x3100>;
|
||||
interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -141,7 +141,7 @@
|
|||
|
||||
pm8941_iadc: iadc@3600 {
|
||||
compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
|
||||
reg = <0x3600 0x100>;
|
||||
reg = <0x3600>;
|
||||
interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
|
||||
qcom,external-resistor-micro-ohms = <10000>;
|
||||
};
|
||||
|
|
@ -161,7 +161,7 @@
|
|||
|
||||
pm8941_wled: wled@d800 {
|
||||
compatible = "qcom,pm8941-wled";
|
||||
reg = <0xd800 0x100>;
|
||||
reg = <0xd800>;
|
||||
label = "backlight";
|
||||
|
||||
status = "disabled";
|
||||
|
|
|
|||
Loading…
Reference in New Issue