diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index ac4944a81521..b50f27fa11d0 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -27,7 +27,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v0.08" +#define DRIVER_VERSION "v0.09" #define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver" /* @@ -144,23 +144,40 @@ static struct usb_serial_driver cp2101_device = { #define REQTYPE_HOST_TO_DEVICE 0x41 #define REQTYPE_DEVICE_TO_HOST 0xc1 -/* Config SET requests. To GET, add 1 to the request number */ -#define CP2101_UART 0x00 /* Enable / Disable */ -#define CP2101_BAUDRATE 0x01 /* (BAUD_RATE_GEN_FREQ / baudrate) */ -#define CP2101_BITS 0x03 /* 0x(0)(databits)(parity)(stopbits) */ -#define CP2101_BREAK 0x05 /* On / Off */ -#define CP2101_CONTROL 0x07 /* Flow control line states */ -#define CP2101_MODEMCTL 0x13 /* Modem controls */ -#define CP2101_CONFIG_6 0x19 /* 6 bytes of config data ??? */ +/* Config request codes */ +#define CP210X_IFC_ENABLE 0x00 +#define CP210X_SET_BAUDDIV 0x01 +#define CP210X_GET_BAUDDIV 0x02 +#define CP210X_SET_LINE_CTL 0x03 +#define CP210X_GET_LINE_CTL 0x04 +#define CP210X_SET_BREAK 0x05 +#define CP210X_IMM_CHAR 0x06 +#define CP210X_SET_MHS 0x07 +#define CP210X_GET_MDMSTS 0x08 +#define CP210X_SET_XON 0x09 +#define CP210X_SET_XOFF 0x0A +#define CP210X_SET_EVENTMASK 0x0B +#define CP210X_GET_EVENTMASK 0x0C +#define CP210X_SET_CHAR 0x0D +#define CP210X_GET_CHARS 0x0E +#define CP210X_GET_PROPS 0x0F +#define CP210X_GET_COMM_STATUS 0x10 +#define CP210X_RESET 0x11 +#define CP210X_PURGE 0x12 +#define CP210X_SET_FLOW 0x13 +#define CP210X_GET_FLOW 0x14 +#define CP210X_EMBED_EVENTS 0x15 +#define CP210X_GET_EVENTSTATE 0x16 +#define CP210X_SET_CHARS 0x19 -/* CP2101_UART */ +/* CP210X_IFC_ENABLE */ #define UART_ENABLE 0x0001 #define UART_DISABLE 0x0000 -/* CP2101_BAUDRATE */ +/* CP210X_(SET|GET)_BAUDDIV */ #define BAUD_RATE_GEN_FREQ 0x384000 -/* CP2101_BITS */ +/* CP210X_(SET|GET)_LINE_CTL */ #define BITS_DATA_MASK 0X0f00 #define BITS_DATA_5 0X0500 #define BITS_DATA_6 0X0600 @@ -180,11 +197,11 @@ static struct usb_serial_driver cp2101_device = { #define BITS_STOP_1_5 0x0001 #define BITS_STOP_2 0x0002 -/* CP2101_BREAK */ +/* CP210X_SET_BREAK */ #define BREAK_ON 0x0000 #define BREAK_OFF 0x0001 -/* CP2101_CONTROL */ +/* CP210X_(SET_MHS|GET_MDMSTS) */ #define CONTROL_DTR 0x0001 #define CONTROL_RTS 0x0002 #define CONTROL_CTS 0x0010 @@ -217,9 +234,6 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request, return -ENOMEM; } - /* For get requests, the request number must be incremented */ - request++; - /* Issue the request, attempting to read 'size' bytes */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), request, REQTYPE_DEVICE_TO_HOST, 0x0000, @@ -357,7 +371,7 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); - if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) { + if (cp2101_set_config_single(port, CP210X_IFC_ENABLE, UART_ENABLE)) { dev_err(&port->dev, "%s - Unable to enable UART\n", __func__); return -EPROTO; @@ -415,7 +429,7 @@ static void cp2101_close(struct usb_serial_port *port) mutex_lock(&port->serial->disc_mutex); if (!port->serial->disconnected) - cp2101_set_config_single(port, CP2101_UART, UART_DISABLE); + cp2101_set_config_single(port, CP210X_IFC_ENABLE, UART_DISABLE); mutex_unlock(&port->serial->disc_mutex); } @@ -456,7 +470,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); - cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2); + cp2101_get_config(port, CP210X_GET_BAUDDIV, &baud, 2); /* Convert to baudrate */ if (baud) baud = cp2101_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud); @@ -466,7 +480,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, cflag = *cflagp; - cp2101_get_config(port, CP2101_BITS, &bits, 2); + cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); cflag &= ~CSIZE; switch (bits & BITS_DATA_MASK) { case BITS_DATA_5: @@ -491,14 +505,14 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; default: dbg("%s - Unknown number of data bits, using 8", __func__); cflag |= CS8; bits &= ~BITS_DATA_MASK; bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; } @@ -521,20 +535,20 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; case BITS_PARITY_SPACE: dbg("%s - parity = SPACE (not supported, disabling parity)", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; default: dbg("%s - Unknown parity mode, disabling parity", __func__); cflag &= ~PARENB; bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; } @@ -547,7 +561,7 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)", __func__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; case BITS_STOP_2: dbg("%s - stop bits = 2", __func__); @@ -557,11 +571,11 @@ static void cp2101_get_termios_port(struct usb_serial_port *port, dbg("%s - Unknown number of stop bits, using 1 stop bit", __func__); bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); + cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2); break; } - cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); + cp2101_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); if (modem_ctl[0] & 0x0008) { dbg("%s - flow control = CRTSCTS", __func__); cflag |= CRTSCTS; @@ -594,7 +608,7 @@ static void cp2101_set_termios(struct tty_struct *tty, if (baud != tty_termios_baud_rate(old_termios) && baud != 0) { dbg("%s - Setting baud rate to %d baud", __func__, baud); - if (cp2101_set_config_single(port, CP2101_BAUDRATE, + if (cp2101_set_config_single(port, CP210X_SET_BAUDDIV, ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) { dbg("Baud rate requested not supported by device\n"); baud = tty_termios_baud_rate(old_termios); @@ -605,7 +619,7 @@ static void cp2101_set_termios(struct tty_struct *tty, /* If the number of data bits is to be updated */ if ((cflag & CSIZE) != (old_cflag & CSIZE)) { - cp2101_get_config(port, CP2101_BITS, &bits, 2); + cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_DATA_MASK; switch (cflag & CSIZE) { case CS5: @@ -635,13 +649,13 @@ static void cp2101_set_termios(struct tty_struct *tty, bits |= BITS_DATA_8; break; } - if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) + if (cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Number of data bits requested " "not supported by device\n"); } if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) { - cp2101_get_config(port, CP2101_BITS, &bits, 2); + cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_PARITY_MASK; if (cflag & PARENB) { if (cflag & PARODD) { @@ -652,13 +666,13 @@ static void cp2101_set_termios(struct tty_struct *tty, dbg("%s - parity = EVEN", __func__); } } - if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) + if (cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Parity mode not supported " "by device\n"); } if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { - cp2101_get_config(port, CP2101_BITS, &bits, 2); + cp2101_get_config(port, CP210X_GET_LINE_CTL, &bits, 2); bits &= ~BITS_STOP_MASK; if (cflag & CSTOPB) { bits |= BITS_STOP_2; @@ -667,13 +681,13 @@ static void cp2101_set_termios(struct tty_struct *tty, bits |= BITS_STOP_1; dbg("%s - stop bits = 1", __func__); } - if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) + if (cp2101_set_config(port, CP210X_SET_LINE_CTL, &bits, 2)) dbg("Number of stop bits requested " "not supported by device\n"); } if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { - cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); + cp2101_get_config(port, CP210X_GET_FLOW, modem_ctl, 16); dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", __func__, modem_ctl[0], modem_ctl[1], modem_ctl[2], modem_ctl[3]); @@ -693,7 +707,7 @@ static void cp2101_set_termios(struct tty_struct *tty, dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", __func__, modem_ctl[0], modem_ctl[1], modem_ctl[2], modem_ctl[3]); - cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16); + cp2101_set_config(port, CP210X_SET_FLOW, modem_ctl, 16); } } @@ -731,7 +745,7 @@ static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file, dbg("%s - control = 0x%.4x", __func__, control); - return cp2101_set_config(port, CP2101_CONTROL, &control, 2); + return cp2101_set_config(port, CP210X_SET_MHS, &control, 2); } static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) @@ -742,7 +756,7 @@ static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) dbg("%s - port %d", __func__, port->number); - cp2101_get_config(port, CP2101_CONTROL, &control, 1); + cp2101_get_config(port, CP210X_GET_MDMSTS, &control, 1); result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) |((control & CONTROL_RTS) ? TIOCM_RTS : 0) @@ -768,7 +782,7 @@ static void cp2101_break_ctl (struct tty_struct *tty, int break_state) state = BREAK_ON; dbg("%s - turning break %s", __func__, state == BREAK_OFF ? "off" : "on"); - cp2101_set_config(port, CP2101_BREAK, &state, 2); + cp2101_set_config(port, CP210X_SET_BREAK, &state, 2); } static int cp2101_startup(struct usb_serial *serial)