e1000e: alternate MAC address support
Port alternate MAC address support from the sourceforge e1000 driver to the upstream e1000e driver. Signed-off-by: Bill Hayes <bill.hayes@hp.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
parent
3df5920c46
commit
93ca161027
|
@ -752,6 +752,10 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
|
|||
ew32(IMC, 0xffffffff);
|
||||
icr = er32(ICR);
|
||||
|
||||
if (hw->mac.type == e1000_82571 &&
|
||||
hw->dev_spec.e82571.alt_mac_addr_is_present)
|
||||
e1000e_set_laa_state_82571(hw, true);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
|
|
|
@ -557,6 +557,7 @@
|
|||
#define NVM_INIT_3GIO_3 0x001A
|
||||
#define NVM_INIT_CONTROL3_PORT_A 0x0024
|
||||
#define NVM_CFG 0x0012
|
||||
#define NVM_ALT_MAC_ADDR_PTR 0x0037
|
||||
#define NVM_CHECKSUM_REG 0x003F
|
||||
|
||||
#define E1000_NVM_CFG_DONE_PORT_0 0x40000 /* MNG config cycle done */
|
||||
|
|
|
@ -816,6 +816,7 @@ struct e1000_bus_info {
|
|||
|
||||
struct e1000_dev_spec_82571 {
|
||||
bool laa_is_present;
|
||||
bool alt_mac_addr_is_present;
|
||||
};
|
||||
|
||||
struct e1000_shadow_ram {
|
||||
|
|
|
@ -2059,9 +2059,44 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw)
|
|||
{
|
||||
s32 ret_val;
|
||||
u16 offset, nvm_data, i;
|
||||
u16 mac_addr_offset = 0;
|
||||
|
||||
if (hw->mac.type == e1000_82571) {
|
||||
/* Check for an alternate MAC address. An alternate MAC
|
||||
* address can be setup by pre-boot software and must be
|
||||
* treated like a permanent address and must override the
|
||||
* actual permanent MAC address. */
|
||||
ret_val = e1000_read_nvm(hw, NVM_ALT_MAC_ADDR_PTR, 1,
|
||||
&mac_addr_offset);
|
||||
if (ret_val) {
|
||||
hw_dbg(hw, "NVM Read Error\n");
|
||||
return ret_val;
|
||||
}
|
||||
if (mac_addr_offset == 0xFFFF)
|
||||
mac_addr_offset = 0;
|
||||
|
||||
if (mac_addr_offset) {
|
||||
if (hw->bus.func == E1000_FUNC_1)
|
||||
mac_addr_offset += ETH_ALEN/sizeof(u16);
|
||||
|
||||
/* make sure we have a valid mac address here
|
||||
* before using it */
|
||||
ret_val = e1000_read_nvm(hw, mac_addr_offset, 1,
|
||||
&nvm_data);
|
||||
if (ret_val) {
|
||||
hw_dbg(hw, "NVM Read Error\n");
|
||||
return ret_val;
|
||||
}
|
||||
if (nvm_data & 0x0001)
|
||||
mac_addr_offset = 0;
|
||||
}
|
||||
|
||||
if (mac_addr_offset)
|
||||
hw->dev_spec.e82571.alt_mac_addr_is_present = 1;
|
||||
}
|
||||
|
||||
for (i = 0; i < ETH_ALEN; i += 2) {
|
||||
offset = i >> 1;
|
||||
offset = mac_addr_offset + (i >> 1);
|
||||
ret_val = e1000_read_nvm(hw, offset, 1, &nvm_data);
|
||||
if (ret_val) {
|
||||
hw_dbg(hw, "NVM Read Error\n");
|
||||
|
@ -2072,7 +2107,7 @@ s32 e1000e_read_mac_addr(struct e1000_hw *hw)
|
|||
}
|
||||
|
||||
/* Flip last bit of mac address if we're on second port */
|
||||
if (hw->bus.func == E1000_FUNC_1)
|
||||
if (!mac_addr_offset && hw->bus.func == E1000_FUNC_1)
|
||||
hw->mac.perm_addr[5] ^= 1;
|
||||
|
||||
for (i = 0; i < ETH_ALEN; i++)
|
||||
|
|
Loading…
Reference in New Issue