From 930b37ee8d84e1f3008c89e9ce09acbe1a6b5670 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 18 Feb 2016 10:59:07 +0100 Subject: [PATCH] net: phy: Add SGMII support for Marvell 88E1510/1512/1514/1518 Add code to select SGMII-to-copper mode upon SGMII interface selection. Signed-off-by: Stefan Roese Cc: Andrew Lunn Cc: Florian Fainelli Cc: David S. Miller Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 41 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index e3eb96443c97..1dcbd3ff9e38 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -133,6 +133,11 @@ #define MII_88E3016_DISABLE_SCRAMBLER 0x0200 #define MII_88E3016_AUTO_MDIX_CROSSOVER 0x0030 +#define MII_88E1510_GEN_CTRL_REG_1 0x14 +#define MII_88E1510_GEN_CTRL_REG_1_MODE_MASK 0x7 +#define MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII 0x1 /* SGMII to copper */ +#define MII_88E1510_GEN_CTRL_REG_1_RESET 0x8000 /* Soft reset */ + MODULE_DESCRIPTION("Marvell PHY driver"); MODULE_AUTHOR("Andy Fleming"); MODULE_LICENSE("GPL"); @@ -438,6 +443,41 @@ static int m88e1318_config_aneg(struct phy_device *phydev) return m88e1121_config_aneg(phydev); } +static int m88e1510_config_init(struct phy_device *phydev) +{ + int err; + int temp; + + /* SGMII-to-Copper mode initialization */ + if (phydev->interface == PHY_INTERFACE_MODE_SGMII) { + /* Select page 18 */ + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 18); + if (err < 0) + return err; + + /* In reg 20, write MODE[2:0] = 0x1 (SGMII to Copper) */ + temp = phy_read(phydev, MII_88E1510_GEN_CTRL_REG_1); + temp &= ~MII_88E1510_GEN_CTRL_REG_1_MODE_MASK; + temp |= MII_88E1510_GEN_CTRL_REG_1_MODE_SGMII; + err = phy_write(phydev, MII_88E1510_GEN_CTRL_REG_1, temp); + if (err < 0) + return err; + + /* PHY reset is necessary after changing MODE[2:0] */ + temp |= MII_88E1510_GEN_CTRL_REG_1_RESET; + err = phy_write(phydev, MII_88E1510_GEN_CTRL_REG_1, temp); + if (err < 0) + return err; + + /* Reset page selection */ + err = phy_write(phydev, MII_MARVELL_PHY_PAGE, 0); + if (err < 0) + return err; + } + + return 0; +} + static int m88e1510_config_aneg(struct phy_device *phydev) { int err; @@ -1259,6 +1299,7 @@ static struct phy_driver marvell_drivers[] = { .features = PHY_GBIT_FEATURES, .flags = PHY_HAS_INTERRUPT, .probe = marvell_probe, + .config_init = &m88e1510_config_init, .config_aneg = &m88e1510_config_aneg, .read_status = &marvell_read_status, .ack_interrupt = &marvell_ack_interrupt,