POWERPC: mpc82xx merge: board-specific/platform stuff(resend)

This intruduces 82xx family in arch/powerpc/platforms,
and has all the board-specific code to represent regression-less
transaction from ppc. The functionality is apparently the same, including
PCI controller.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
This commit is contained in:
Vitaly Bordug 2006-10-02 22:45:17 +04:00
parent ed943c1fab
commit 91bd61099d
6 changed files with 884 additions and 0 deletions

View File

@ -0,0 +1,21 @@
menu "Platform support"
depends on PPC_82xx
choice
prompt "Machine Type"
default MPC82xx_ADS
config MPC82xx_ADS
bool "Freescale MPC82xx ADS"
select DEFAULT_UIMAGE
select PQ2ADS
select 8272
select 8260
select CPM2
select FSL_SOC
help
This option enables support for the MPC8272 ADS board
endchoice
endmenu

View File

@ -0,0 +1,5 @@
#
# Makefile for the PowerPC 82xx linux kernel.
#
obj-$(CONFIG_PPC_82xx) += mpc82xx.o
obj-$(CONFIG_MPC82xx_ADS) += mpc82xx_ads.o

View File

@ -0,0 +1,19 @@
#ifndef _PPC_KERNEL_M82XX_PCI_H
#define _PPC_KERNEL_M82XX_PCI_H
/*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <asm/m8260_pci.h>
#define SIU_INT_IRQ1 ((uint)0x13 + CPM_IRQ_OFFSET)
#ifndef _IO_BASE
#define _IO_BASE isa_io_base
#endif
#endif /* _PPC_KERNEL_M8260_PCI_H */

View File

@ -0,0 +1,111 @@
/*
* MPC82xx setup and early boot code plus other random bits.
*
* Author: Vitaly Bordug <vbordug@ru.mvista.com>
*
* Copyright (c) 2006 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <linux/module.h>
#include <linux/fsl_devices.h>
#include <linux/fs_uart_pd.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/atomic.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/bootinfo.h>
#include <asm/pci-bridge.h>
#include <asm/mpc8260.h>
#include <asm/irq.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
#include <asm/cpm2.h>
#include <asm/udbg.h>
#include <asm/i8259.h>
#include <linux/fs_enet_pd.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/cpm2_pic.h>
#include "pq2ads_pd.h"
static int __init get_freq(char *name, unsigned long *val)
{
struct device_node *cpu;
unsigned int *fp;
int found = 0;
/* The cpu node should have timebase and clock frequency properties */
cpu = of_find_node_by_type(NULL, "cpu");
if (cpu) {
fp = (unsigned int *)get_property(cpu, name, NULL);
if (fp) {
found = 1;
*val = *fp++;
}
of_node_put(cpu);
}
return found;
}
void __init m82xx_calibrate_decr(void)
{
ppc_tb_freq = 125000000;
if (!get_freq("bus-frequency", &ppc_tb_freq)) {
printk(KERN_ERR "WARNING: Estimating decrementer frequency "
"(not found)\n");
}
ppc_tb_freq /= 4;
ppc_proc_freq = 1000000000;
if (!get_freq("clock-frequency", &ppc_proc_freq))
printk(KERN_ERR "WARNING: Estimating processor frequency"
"(not found)\n");
}
void mpc82xx_ads_show_cpuinfo(struct seq_file *m)
{
uint pvid, svid, phid1;
uint memsize = total_memory;
pvid = mfspr(SPRN_PVR);
svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n");
seq_printf(m, "Machine\t\t: %s\n", CPUINFO_MACHINE);
seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
/* Display cpu Pll setting */
phid1 = mfspr(SPRN_HID1);
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
/* Display the amount of memory */
seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
}

View File

@ -0,0 +1,661 @@
/*
* MPC82xx_ads setup and early boot code plus other random bits.
*
* Author: Vitaly Bordug <vbordug@ru.mvista.com>
* m82xx_restart fix by Wade Farnsworth <wfarnsworth@mvista.com>
*
* Copyright (c) 2006 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <linux/module.h>
#include <linux/fsl_devices.h>
#include <linux/fs_uart_pd.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/atomic.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/bootinfo.h>
#include <asm/pci-bridge.h>
#include <asm/mpc8260.h>
#include <asm/irq.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
#include <asm/cpm2.h>
#include <asm/udbg.h>
#include <asm/i8259.h>
#include <linux/fs_enet_pd.h>
#include <sysdev/fsl_soc.h>
#include <../sysdev/cpm2_pic.h>
#include "pq2ads_pd.h"
#ifdef CONFIG_PCI
static uint pci_clk_frq;
static struct {
unsigned long *pci_int_stat_reg;
unsigned long *pci_int_mask_reg;
} pci_regs;
static unsigned long pci_int_base;
static struct irq_host *pci_pic_host;
static struct device_node *pci_pic_node;
#endif
static void __init mpc82xx_ads_pic_init(void)
{
struct device_node *np = of_find_compatible_node(NULL, "cpm-pic", "CPM2");
struct resource r;
cpm2_map_t *cpm_reg;
if (np == NULL) {
printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
return;
}
if (of_address_to_resource(np, 0, &r)) {
printk(KERN_ERR "PIC init: invalid resource\n");
of_node_put(np);
return;
}
cpm2_pic_init(np);
of_node_put(np);
/* Initialize the default interrupt mapping priorities,
* in case the boot rom changed something on us.
*/
cpm_reg = (cpm2_map_t *) ioremap(get_immrbase(), sizeof(cpm2_map_t));
cpm_reg->im_intctl.ic_siprr = 0x05309770;
iounmap(cpm_reg);
#ifdef CONFIG_PCI
/* Initialize stuff for the 82xx CPLD IC and install demux */
m82xx_pci_init_irq();
#endif
}
static void init_fcc1_ioports(struct fs_platform_info *fpi)
{
struct io_port *io;
u32 tempval;
cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
struct device_node *np;
struct resource r;
u32 *bcsr;
np = of_find_node_by_type(NULL, "memory");
if (!np) {
printk(KERN_INFO "No memory node in device tree\n");
return;
}
if (of_address_to_resource(np, 1, &r)) {
printk(KERN_INFO "No memory reg property [1] in devicetree\n");
return;
}
of_node_put(np);
bcsr = ioremap(r.start + 4, sizeof(u32));
io = &immap->im_ioport;
/* Enable the PHY */
clrbits32(bcsr, BCSR1_FETHIEN);
setbits32(bcsr, BCSR1_FETH_RST);
/* FCC1 pins are on port A/C. */
/* Configure port A and C pins for FCC1 Ethernet. */
tempval = in_be32(&io->iop_pdira);
tempval &= ~PA1_DIRA0;
tempval |= PA1_DIRA1;
out_be32(&io->iop_pdira, tempval);
tempval = in_be32(&io->iop_psora);
tempval &= ~PA1_PSORA0;
tempval |= PA1_PSORA1;
out_be32(&io->iop_psora, tempval);
setbits32(&io->iop_ppara, PA1_DIRA0 | PA1_DIRA1);
/* Alter clocks */
tempval = PC_CLK(fpi->clk_tx - 8) | PC_CLK(fpi->clk_rx - 8);
clrbits32(&io->iop_psorc, tempval);
clrbits32(&io->iop_pdirc, tempval);
setbits32(&io->iop_pparc, tempval);
cpm2_clk_setup(CPM_CLK_FCC1, fpi->clk_rx, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_FCC1, fpi->clk_tx, CPM_CLK_TX);
iounmap(bcsr);
iounmap(immap);
}
static void init_fcc2_ioports(struct fs_platform_info *fpi)
{
cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
struct device_node *np;
struct resource r;
u32 *bcsr;
struct io_port *io;
u32 tempval;
np = of_find_node_by_type(NULL, "memory");
if (!np) {
printk(KERN_INFO "No memory node in device tree\n");
return;
}
if (of_address_to_resource(np, 1, &r)) {
printk(KERN_INFO "No memory reg property [1] in devicetree\n");
return;
}
of_node_put(np);
io = &immap->im_ioport;
bcsr = ioremap(r.start + 12, sizeof(u32));
/* Enable the PHY */
clrbits32(bcsr, BCSR3_FETHIEN2);
setbits32(bcsr, BCSR3_FETH2_RST);
/* FCC2 are port B/C. */
/* Configure port A and C pins for FCC2 Ethernet. */
tempval = in_be32(&io->iop_pdirb);
tempval &= ~PB2_DIRB0;
tempval |= PB2_DIRB1;
out_be32(&io->iop_pdirb, tempval);
tempval = in_be32(&io->iop_psorb);
tempval &= ~PB2_PSORB0;
tempval |= PB2_PSORB1;
out_be32(&io->iop_psorb, tempval);
setbits32(&io->iop_pparb, PB2_DIRB0 | PB2_DIRB1);
tempval = PC_CLK(fpi->clk_tx - 8) | PC_CLK(fpi->clk_rx - 8);
/* Alter clocks */
clrbits32(&io->iop_psorc, tempval);
clrbits32(&io->iop_pdirc, tempval);
setbits32(&io->iop_pparc, tempval);
cpm2_clk_setup(CPM_CLK_FCC2, fpi->clk_rx, CPM_CLK_RX);
cpm2_clk_setup(CPM_CLK_FCC2, fpi->clk_tx, CPM_CLK_TX);
iounmap(bcsr);
iounmap(immap);
}
void init_fcc_ioports(struct fs_platform_info *fpi)
{
int fcc_no = fs_get_fcc_index(fpi->fs_no);
switch (fcc_no) {
case 0:
init_fcc1_ioports(fpi);
break;
case 1:
init_fcc2_ioports(fpi);
break;
default:
printk(KERN_ERR "init_fcc_ioports: invalid FCC number\n");
return;
}
}
static void init_scc1_uart_ioports(struct fs_uart_platform_info *data)
{
cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
/* SCC1 is only on port D */
setbits32(&immap->im_ioport.iop_ppard, 0x00000003);
clrbits32(&immap->im_ioport.iop_psord, 0x00000001);
setbits32(&immap->im_ioport.iop_psord, 0x00000002);
clrbits32(&immap->im_ioport.iop_pdird, 0x00000001);
setbits32(&immap->im_ioport.iop_pdird, 0x00000002);
clrbits32(&immap->im_cpmux.cmx_scr, (0x00000007 << (4 - data->clk_tx)));
clrbits32(&immap->im_cpmux.cmx_scr, (0x00000038 << (4 - data->clk_rx)));
setbits32(&immap->im_cpmux.cmx_scr,
((data->clk_tx - 1) << (4 - data->clk_tx)));
setbits32(&immap->im_cpmux.cmx_scr,
((data->clk_rx - 1) << (4 - data->clk_rx)));
iounmap(immap);
}
static void init_scc4_uart_ioports(struct fs_uart_platform_info *data)
{
cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
setbits32(&immap->im_ioport.iop_ppard, 0x00000600);
clrbits32(&immap->im_ioport.iop_psord, 0x00000600);
clrbits32(&immap->im_ioport.iop_pdird, 0x00000200);
setbits32(&immap->im_ioport.iop_pdird, 0x00000400);
clrbits32(&immap->im_cpmux.cmx_scr, (0x00000007 << (4 - data->clk_tx)));
clrbits32(&immap->im_cpmux.cmx_scr, (0x00000038 << (4 - data->clk_rx)));
setbits32(&immap->im_cpmux.cmx_scr,
((data->clk_tx - 1) << (4 - data->clk_tx)));
setbits32(&immap->im_cpmux.cmx_scr,
((data->clk_rx - 1) << (4 - data->clk_rx)));
iounmap(immap);
}
void init_scc_ioports(struct fs_uart_platform_info *data)
{
int scc_no = fs_get_scc_index(data->fs_no);
switch (scc_no) {
case 0:
init_scc1_uart_ioports(data);
data->brg = data->clk_rx;
break;
case 3:
init_scc4_uart_ioports(data);
data->brg = data->clk_rx;
break;
default:
printk(KERN_ERR "init_scc_ioports: invalid SCC number\n");
return;
}
}
void __init m82xx_board_setup(void)
{
cpm2_map_t *immap = ioremap(get_immrbase(), sizeof(cpm2_map_t));
struct device_node *np;
struct resource r;
u32 *bcsr;
np = of_find_node_by_type(NULL, "memory");
if (!np) {
printk(KERN_INFO "No memory node in device tree\n");
return;
}
if (of_address_to_resource(np, 1, &r)) {
printk(KERN_INFO "No memory reg property [1] in devicetree\n");
return;
}
of_node_put(np);
bcsr = ioremap(r.start + 4, sizeof(u32));
/* Enable the 2nd UART port */
clrbits32(bcsr, BCSR1_RS232_EN2);
#ifdef CONFIG_SERIAL_CPM_SCC1
clrbits32((u32 *) & immap->im_scc[0].scc_sccm,
UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32 *) & immap->im_scc[0].scc_gsmrl,
SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC2
clrbits32((u32 *) & immap->im_scc[1].scc_sccm,
UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32 *) & immap->im_scc[1].scc_gsmrl,
SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC3
clrbits32((u32 *) & immap->im_scc[2].scc_sccm,
UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32 *) & immap->im_scc[2].scc_gsmrl,
SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
#ifdef CONFIG_SERIAL_CPM_SCC4
clrbits32((u32 *) & immap->im_scc[3].scc_sccm,
UART_SCCM_TX | UART_SCCM_RX);
clrbits32((u32 *) & immap->im_scc[3].scc_gsmrl,
SCC_GSMRL_ENR | SCC_GSMRL_ENT);
#endif
iounmap(bcsr);
iounmap(immap);
}
#ifdef CONFIG_PCI
static void m82xx_pci_mask_irq(unsigned int irq)
{
int bit = irq - pci_int_base;
*pci_regs.pci_int_mask_reg |= (1 << (31 - bit));
return;
}
static void m82xx_pci_unmask_irq(unsigned int irq)
{
int bit = irq - pci_int_base;
*pci_regs.pci_int_mask_reg &= ~(1 << (31 - bit));
return;
}
static void m82xx_pci_mask_and_ack(unsigned int irq)
{
int bit = irq - pci_int_base;
*pci_regs.pci_int_mask_reg |= (1 << (31 - bit));
return;
}
static void m82xx_pci_end_irq(unsigned int irq)
{
int bit = irq - pci_int_base;
*pci_regs.pci_int_mask_reg &= ~(1 << (31 - bit));
return;
}
struct hw_interrupt_type m82xx_pci_ic = {
.typename = "MPC82xx ADS PCI",
.name = "MPC82xx ADS PCI",
.enable = m82xx_pci_unmask_irq,
.disable = m82xx_pci_mask_irq,
.ack = m82xx_pci_mask_and_ack,
.end = m82xx_pci_end_irq,
.mask = m82xx_pci_mask_irq,
.mask_ack = m82xx_pci_mask_and_ack,
.unmask = m82xx_pci_unmask_irq,
.eoi = m82xx_pci_end_irq,
};
static void
m82xx_pci_irq_demux(unsigned int irq, struct irq_desc *desc,
struct pt_regs *regs)
{
unsigned long stat, mask, pend;
int bit;
for (;;) {
stat = *pci_regs.pci_int_stat_reg;
mask = *pci_regs.pci_int_mask_reg;
pend = stat & ~mask & 0xf0000000;
if (!pend)
break;
for (bit = 0; pend != 0; ++bit, pend <<= 1) {
if (pend & 0x80000000)
__do_IRQ(pci_int_base + bit, regs);
}
}
}
static int pci_pic_host_match(struct irq_host *h, struct device_node *node)
{
return node == pci_pic_node;
}
static int pci_pic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
get_irq_desc(virq)->status |= IRQ_LEVEL;
set_irq_chip(virq, &m82xx_pci_ic);
return 0;
}
static void pci_host_unmap(struct irq_host *h, unsigned int virq)
{
/* remove chip and handler */
set_irq_chip(virq, NULL);
}
static struct irq_host_ops pci_pic_host_ops = {
.match = pci_pic_host_match,
.map = pci_pic_host_map,
.unmap = pci_host_unmap,
};
void m82xx_pci_init_irq(void)
{
int irq;
cpm2_map_t *immap;
struct device_node *np;
struct resource r;
const u32 *regs;
unsigned int size;
const u32 *irq_map;
int i;
unsigned int irq_max, irq_min;
if ((np = of_find_node_by_type(NULL, "soc")) == NULL) {
printk(KERN_INFO "No SOC node in device tree\n");
return;
}
memset(&r, 0, sizeof(r));
if (of_address_to_resource(np, 0, &r)) {
printk(KERN_INFO "No SOC reg property in device tree\n");
return;
}
immap = ioremap(r.start, sizeof(*immap));
of_node_put(np);
/* install the demultiplexer for the PCI cascade interrupt */
np = of_find_node_by_type(NULL, "pci");
if (!np) {
printk(KERN_INFO "No pci node on device tree\n");
iounmap(immap);
return;
}
irq_map = get_property(np, "interrupt-map", &size);
if ((!irq_map) || (size <= 7)) {
printk(KERN_INFO "No interrupt-map property of pci node\n");
iounmap(immap);
return;
}
size /= sizeof(irq_map[0]);
for (i = 0, irq_max = 0, irq_min = 512; i < size; i += 7, irq_map += 7) {
if (irq_map[5] < irq_min)
irq_min = irq_map[5];
if (irq_map[5] > irq_max)
irq_max = irq_map[5];
}
pci_int_base = irq_min;
irq = irq_of_parse_and_map(np, 0);
set_irq_chained_handler(irq, m82xx_pci_irq_demux);
of_node_put(np);
np = of_find_node_by_type(NULL, "pci-pic");
if (!np) {
printk(KERN_INFO "No pci pic node on device tree\n");
iounmap(immap);
return;
}
pci_pic_node = of_node_get(np);
/* PCI interrupt controller registers: status and mask */
regs = get_property(np, "reg", &size);
if ((!regs) || (size <= 2)) {
printk(KERN_INFO "No reg property in pci pic node\n");
iounmap(immap);
return;
}
pci_regs.pci_int_stat_reg =
ioremap(regs[0], sizeof(*pci_regs.pci_int_stat_reg));
pci_regs.pci_int_mask_reg =
ioremap(regs[1], sizeof(*pci_regs.pci_int_mask_reg));
of_node_put(np);
/* configure chip select for PCI interrupt controller */
immap->im_memctl.memc_br3 = regs[0] | 0x00001801;
immap->im_memctl.memc_or3 = 0xffff8010;
/* make PCI IRQ level sensitive */
immap->im_intctl.ic_siexr &= ~(1 << (14 - (irq - SIU_INT_IRQ1)));
/* mask all PCI interrupts */
*pci_regs.pci_int_mask_reg |= 0xfff00000;
iounmap(immap);
pci_pic_host =
irq_alloc_host(IRQ_HOST_MAP_LINEAR, irq_max - irq_min + 1,
&pci_pic_host_ops, irq_max + 1);
return;
}
static int m82xx_pci_exclude_device(u_char bus, u_char devfn)
{
if (bus == 0 && PCI_SLOT(devfn) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
else
return PCIBIOS_SUCCESSFUL;
}
static void
__init mpc82xx_pcibios_fixup(void)
{
struct pci_dev *dev = NULL;
for_each_pci_dev(dev) {
pci_read_irq_line(dev);
}
}
void __init add_bridge(struct device_node *np)
{
int len;
struct pci_controller *hose;
struct resource r;
const int *bus_range;
const void *ptr;
memset(&r, 0, sizeof(r));
if (of_address_to_resource(np, 0, &r)) {
printk(KERN_INFO "No PCI reg property in device tree\n");
return;
}
if (!(ptr = get_property(np, "clock-frequency", NULL))) {
printk(KERN_INFO "No clock-frequency property in PCI node");
return;
}
pci_clk_frq = *(uint *) ptr;
of_node_put(np);
bus_range = get_property(np, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int)) {
printk(KERN_WARNING "Can't get bus-range for %s, assume"
" bus 0\n", np->full_name);
}
pci_assign_all_buses = 1;
hose = pcibios_alloc_controller();
if (!hose)
return;
hose->arch_data = np;
hose->set_cfg_type = 1;
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
hose->bus_offset = 0;
hose->set_cfg_type = 1;
setup_indirect_pci(hose,
r.start + offsetof(pci_cpm2_t, pci_cfg_addr),
r.start + offsetof(pci_cpm2_t, pci_cfg_data));
pci_process_bridge_OF_ranges(hose, np, 1);
}
#endif
/*
* Setup the architecture
*/
static void __init mpc82xx_ads_setup_arch(void)
{
#ifdef CONFIG_PCI
struct device_node *np;
#endif
if (ppc_md.progress)
ppc_md.progress("mpc82xx_ads_setup_arch()", 0);
cpm2_reset();
/* Map I/O region to a 256MB BAT */
m82xx_board_setup();
#ifdef CONFIG_PCI
ppc_md.pci_exclude_device = m82xx_pci_exclude_device;
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
of_node_put(np);
ppc_md.pci_map_irq = NULL;
ppc_md.pcibios_fixup = mpc82xx_pcibios_fixup;
ppc_md.pcibios_fixup_bus = NULL;
#endif
#ifdef CONFIG_ROOT_NFS
ROOT_DEV = Root_NFS;
#else
ROOT_DEV = Root_HDA1;
#endif
if (ppc_md.progress)
ppc_md.progress("mpc82xx_ads_setup_arch(), finish", 0);
}
/*
* Called very early, device-tree isn't unflattened
*/
static int __init mpc82xx_ads_probe(void)
{
/* We always match for now, eventually we should look at
* the flat dev tree to ensure this is the board we are
* supposed to run on
*/
return 1;
}
#define RMR_CSRE 0x00000001
static void m82xx_restart(char *cmd)
{
__volatile__ unsigned char dummy;
local_irq_disable();
((cpm2_map_t *) cpm2_immr)->im_clkrst.car_rmr |= RMR_CSRE;
/* Clear the ME,EE,IR & DR bits in MSR to cause checkstop */
mtmsr(mfmsr() & ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR));
dummy = ((cpm2_map_t *) cpm2_immr)->im_clkrst.res[0];
printk("Restart failed\n");
while (1) ;
}
static void m82xx_halt(void)
{
local_irq_disable();
while (1) ;
}
define_machine(mpc82xx_ads)
{
.name = "MPC82xx ADS",
.probe = mpc82xx_ads_probe,
.setup_arch = mpc82xx_ads_setup_arch,
.init_IRQ = mpc82xx_ads_pic_init,
.show_cpuinfo = mpc82xx_ads_show_cpuinfo,
.get_irq = cpm2_get_irq,
.calibrate_decr = m82xx_calibrate_decr,
.restart = m82xx_restart,.halt = m82xx_halt,
};

View File

@ -0,0 +1,67 @@
/*
* PQ2/mpc8260 board-specific stuff
*
* A collection of structures, addresses, and values associated with
* the Freescale MPC8260ADS/MPC8266ADS-PCI boards.
* Copied from the RPX-Classic and SBS8260 stuff.
*
* Author: Vitaly Bordug <vbordug@ru.mvista.com>
*
* Originally written by Dan Malek for Motorola MPC8260 family
*
* Copyright (c) 2001 Dan Malek <dan@embeddedalley.com>
* Copyright (c) 2006 MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifdef __KERNEL__
#ifndef __MACH_ADS8260_DEFS
#define __MACH_ADS8260_DEFS
#include <linux/config.h>
#include <asm/ppcboot.h>
/* For our show_cpuinfo hooks. */
#define CPUINFO_VENDOR "Freescale Semiconductor"
#define CPUINFO_MACHINE "PQ2 ADS PowerPC"
/* Backword-compatibility stuff for the drivers */
#define CPM_MAP_ADDR ((uint)0xf0000000)
#define CPM_IRQ_OFFSET 0
/* The ADS8260 has 16, 32-bit wide control/status registers, accessed
* only on word boundaries.
* Not all are used (yet), or are interesting to us (yet).
*/
/* Things of interest in the CSR.
*/
#define BCSR0_LED0 ((uint)0x02000000) /* 0 == on */
#define BCSR0_LED1 ((uint)0x01000000) /* 0 == on */
#define BCSR1_FETHIEN ((uint)0x08000000) /* 0 == enable*/
#define BCSR1_FETH_RST ((uint)0x04000000) /* 0 == reset */
#define BCSR1_RS232_EN1 ((uint)0x02000000) /* 0 ==enable */
#define BCSR1_RS232_EN2 ((uint)0x01000000) /* 0 ==enable */
#define BCSR3_FETHIEN2 ((uint)0x10000000) /* 0 == enable*/
#define BCSR3_FETH2_RS ((uint)0x80000000) /* 0 == reset */
/* cpm serial driver works with constants below */
#define SIU_INT_SMC1 ((uint)0x04+CPM_IRQ_OFFSET)
#define SIU_INT_SMC2i ((uint)0x05+CPM_IRQ_OFFSET)
#define SIU_INT_SCC1 ((uint)0x28+CPM_IRQ_OFFSET)
#define SIU_INT_SCC2 ((uint)0x29+CPM_IRQ_OFFSET)
#define SIU_INT_SCC3 ((uint)0x2a+CPM_IRQ_OFFSET)
#define SIU_INT_SCC4 ((uint)0x2b+CPM_IRQ_OFFSET)
void m82xx_pci_init_irq(void);
void mpc82xx_ads_show_cpuinfo(struct seq_file*);
void m82xx_calibrate_decr(void);
#endif /* __MACH_ADS8260_DEFS */
#endif /* __KERNEL__ */