Input: ads7846 - add regulator support

The ADS7846/TSC2046 touchscreen controllers can (and usually are)
connected to various regulators for power, so add regulator support.

Valid regulator will now be required, so boards without complete
regulator setup should either disable regulator framework or enable
CONFIG_REGULATOR_DUMMY.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
This commit is contained in:
Grazvydas Ignotas 2010-02-25 02:04:56 -08:00 committed by Dmitry Torokhov
parent a1e1274747
commit 91143379b0
1 changed files with 27 additions and 1 deletions

View File

@ -27,6 +27,7 @@
#include <linux/gpio.h> #include <linux/gpio.h>
#include <linux/spi/spi.h> #include <linux/spi/spi.h>
#include <linux/spi/ads7846.h> #include <linux/spi/ads7846.h>
#include <linux/regulator/consumer.h>
#include <asm/irq.h> #include <asm/irq.h>
/* /*
@ -85,6 +86,7 @@ struct ads7846 {
char name[32]; char name[32];
struct spi_device *spi; struct spi_device *spi;
struct regulator *reg;
#if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE) #if defined(CONFIG_HWMON) || defined(CONFIG_HWMON_MODULE)
struct attribute_group *attr_group; struct attribute_group *attr_group;
@ -788,6 +790,8 @@ static void ads7846_disable(struct ads7846 *ts)
} }
} }
regulator_disable(ts->reg);
/* we know the chip's in lowpower mode since we always /* we know the chip's in lowpower mode since we always
* leave it that way after every request * leave it that way after every request
*/ */
@ -799,6 +803,8 @@ static void ads7846_enable(struct ads7846 *ts)
if (!ts->disabled) if (!ts->disabled)
return; return;
regulator_enable(ts->reg);
ts->disabled = 0; ts->disabled = 0;
ts->irq_disabled = 0; ts->irq_disabled = 0;
enable_irq(ts->spi->irq); enable_irq(ts->spi->irq);
@ -1139,6 +1145,19 @@ static int __devinit ads7846_probe(struct spi_device *spi)
ts->last_msg = m; ts->last_msg = m;
ts->reg = regulator_get(&spi->dev, "vcc");
if (IS_ERR(ts->reg)) {
dev_err(&spi->dev, "unable to get regulator: %ld\n",
PTR_ERR(ts->reg));
goto err_free_gpio;
}
err = regulator_enable(ts->reg);
if (err) {
dev_err(&spi->dev, "unable to enable regulator: %d\n", err);
goto err_put_regulator;
}
if (request_irq(spi->irq, ads7846_irq, IRQF_TRIGGER_FALLING, if (request_irq(spi->irq, ads7846_irq, IRQF_TRIGGER_FALLING,
spi->dev.driver->name, ts)) { spi->dev.driver->name, ts)) {
dev_info(&spi->dev, dev_info(&spi->dev,
@ -1148,7 +1167,7 @@ static int __devinit ads7846_probe(struct spi_device *spi)
spi->dev.driver->name, ts); spi->dev.driver->name, ts);
if (err) { if (err) {
dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq); dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
goto err_free_gpio; goto err_disable_regulator;
} }
} }
@ -1180,6 +1199,10 @@ static int __devinit ads7846_probe(struct spi_device *spi)
ads784x_hwmon_unregister(spi, ts); ads784x_hwmon_unregister(spi, ts);
err_free_irq: err_free_irq:
free_irq(spi->irq, ts); free_irq(spi->irq, ts);
err_disable_regulator:
regulator_disable(ts->reg);
err_put_regulator:
regulator_put(ts->reg);
err_free_gpio: err_free_gpio:
if (ts->gpio_pendown != -1) if (ts->gpio_pendown != -1)
gpio_free(ts->gpio_pendown); gpio_free(ts->gpio_pendown);
@ -1208,6 +1231,9 @@ static int __devexit ads7846_remove(struct spi_device *spi)
/* suspend left the IRQ disabled */ /* suspend left the IRQ disabled */
enable_irq(ts->spi->irq); enable_irq(ts->spi->irq);
regulator_disable(ts->reg);
regulator_put(ts->reg);
if (ts->gpio_pendown != -1) if (ts->gpio_pendown != -1)
gpio_free(ts->gpio_pendown); gpio_free(ts->gpio_pendown);