ARM: SoC fixes for 4.1-rc2
A few patches have come up since the merge window. The largest one is a rewrite of the PXA lubbock/mainstone IRQ handling. This was already broken in 2011 by a change to the GPIO code and only noticed now. The other changes contained here are: MAINTAINERS file updates: - Ray Jui and Scott Branden are now co-maintainers for some of the mach-bcm chips, while Christian Daudt and Marc Carino have stepped down. - Andrew Victor is no longer maintaining at91. Instead, Alexandre Belloni now becomes an official maintainer, after having done a bulk of the work for a while. - Baruch Siach, who added the mach-digicolor platform in 4.1 is now listed as maintainer - The git URL for mach-socfpga has changed Bug fixes: - Three bug fixes for new rockchip rk3288 code - A regression fix to make SD card support work on certain ux500 boards - multiple smaller dts fixes for imx, omap, mvebu, and shmobile - a regression fiix for omap3 power consumption - a fix for regression in the ARM CCI bus driver Configuration changes: - more imx platforms are now enabled in multi_v7_defconfig -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIVAwUAVU5vsWCrR//JCVInAQK5Zw/9GMFUQcLfwqfUitabRvA+FjbEYyeKHW2Y BCm5OJSOH2MB4/suvmYggIESncHGCzw2iZZwFJ3seuO7vyFAg2pLOmpm2VBvIfqP JgokZOhfHDTujogpakNn8ByKszxb/XkuzuDF3AS2BX4H25Rhp7jX6EgrubK9zDcH wYsaAXSwc8uUe2885cOK8qYoBhkPRsMqUa4HHp4Z51QNwa+koV9xMFlNyy/j8N8F xKjfAW5LCeEdviOjFlYb0Bb3JIerIKmosjHx55g6XCEB1TUKAN6TmqXRUU89dj/0 MQoD5pXCI1RaV8qjpAFqwcFmfnsAzRob9n1WWEgqwCiKdIDX7E98WeJNGrQ6SlSA xePcS+1MMNkTi20CdTSHPwVg5CFz7VG9YTMDrvGtz9tuGtCBQHGhA5o8eQ6eXDYz cEMc781Ax4M4Uc3OKb+9M9OAnB+RyJmizjzgR7cQHaQfzI7hVgRAxywu9Z0j4HKJ 4OmtcOAfwZyEKms9AzvbozKWROVY+T9rC7Aup6SlOSaxupqCdvrMb2XffrixmuVz B9vox64BT0Ot0/jqTsZs5YR3UDlX7v1UTx8+BIta7zDvPXIFUSU+dNcS4BDsOkDa 8Knhi4BpydNaKCxMb8/Q7BjzxNsaMcCEUvNfrjOH7LMHmQhygiKmOSOj3fxEM9S5 xMSWzw3U0yU= =lVQn -----END PGP SIGNATURE----- Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "A few patches have come up since the merge window. The largest one is a rewrite of the PXA lubbock/mainstone IRQ handling. This was already broken in 2011 by a change to the GPIO code and only noticed now. The other changes contained here are: MAINTAINERS file updates: - Ray Jui and Scott Branden are now co-maintainers for some of the mach-bcm chips, while Christian Daudt and Marc Carino have stepped down. - Andrew Victor is no longer maintaining at91. Instead, Alexandre Belloni now becomes an official maintainer, after having done a bulk of the work for a while. - Baruch Siach, who added the mach-digicolor platform in 4.1 is now listed as maintainer - The git URL for mach-socfpga has changed Bug fixes: - Three bug fixes for new rockchip rk3288 code - A regression fix to make SD card support work on certain ux500 boards - multiple smaller dts fixes for imx, omap, mvebu, and shmobile - a regression fiix for omap3 power consumption - a fix for regression in the ARM CCI bus driver Configuration changes: - more imx platforms are now enabled in multi_v7_defconfig" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) MAINTAINERS: add Conexant Digicolor machines entry MAINTAINERS: socfpga: update the git repo for SoCFPGA ARM: multi_v7_defconfig: Select more FSL SoCs MAINTAINERS: replace an AT91 maintainer drivers: CCI: fix used_mask init in validate_group() bus: omap_l3_noc: Fix master id address decoding for OMAP5 bus: omap_l3_noc: Fix offset for DRA7 CLK1_HOST_CLK1_2 instance ARM: dts: dra7: Fix efuse register size for ABB ARM: dts: am57xx-beagle-x15: Switch GPIO fan number ARM: dts: am57xx-beagle-x15: Switch UART mux pins ARM: dts: am437x-sk: reduce col-scan-delay-us ARM: dts: am437x-sk: fix for new newhaven display module revision ARM: dts: am57xx-beagle-x15: Fix RTC aliases ARM: dts: am57xx-beagle-x15: Fix IRQ type for mcp7941x ARM: dts: omap3: Add #iommu-cells to isp and iva iommu ARM: omap2plus_defconfig: Enable EXTCON_USB_GPIO ARM: dts: OMAP3-N900: Add microphone bias voltages ARM: OMAP2+: Fix omap off idle power consumption creeping up MAINTAINERS: Update brcmstb entry MAINTAINERS: Remove Christian Daudt for mach-bcm ...
This commit is contained in:
commit
8f59ae0643
7
CREDITS
7
CREDITS
|
@ -3709,6 +3709,13 @@ N: Dirk Verworner
|
|||
D: Co-author of German book ``Linux-Kernel-Programmierung''
|
||||
D: Co-founder of Berlin Linux User Group
|
||||
|
||||
N: Andrew Victor
|
||||
E: linux@maxim.org.za
|
||||
W: http://maxim.org.za/at91_26.html
|
||||
D: First maintainer of Atmel ARM-based SoC, aka AT91
|
||||
D: Introduced support for at91rm9200, the first chip of AT91 family
|
||||
S: South Africa
|
||||
|
||||
N: Riku Voipio
|
||||
E: riku.voipio@iki.fi
|
||||
D: Author of PCA9532 LED and Fintek f75375s hwmon driver
|
||||
|
|
|
@ -6,6 +6,7 @@ provided by Arteris.
|
|||
Required properties:
|
||||
- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
|
||||
Should be "ti,omap4-l3-noc" for OMAP4 family
|
||||
Should be "ti,omap5-l3-noc" for OMAP5 family
|
||||
Should be "ti,dra7-l3-noc" for DRA7 family
|
||||
Should be "ti,am4372-l3-noc" for AM43 family
|
||||
- reg: Contains L3 register address range for each noc domain.
|
||||
|
|
|
@ -38,7 +38,7 @@ dma_apbx: dma-apbx@80024000 {
|
|||
80 81 68 69
|
||||
70 71 72 73
|
||||
74 75 76 77>;
|
||||
interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
|
||||
interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
|
||||
"saif0", "saif1", "i2c0", "i2c1",
|
||||
"auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
|
||||
"auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
|
||||
|
|
18
MAINTAINERS
18
MAINTAINERS
|
@ -892,11 +892,10 @@ S: Maintained
|
|||
F: arch/arm/mach-alpine/
|
||||
|
||||
ARM/ATMEL AT91RM9200 AND AT91SAM ARM ARCHITECTURES
|
||||
M: Andrew Victor <linux@maxim.org.za>
|
||||
M: Nicolas Ferre <nicolas.ferre@atmel.com>
|
||||
M: Alexandre Belloni <alexandre.belloni@free-electrons.com>
|
||||
M: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
W: http://maxim.org.za/at91_26.html
|
||||
W: http://www.linux4sam.org
|
||||
S: Supported
|
||||
F: arch/arm/mach-at91/
|
||||
|
@ -990,6 +989,12 @@ F: drivers/clocksource/timer-prima2.c
|
|||
F: drivers/clocksource/timer-atlas7.c
|
||||
N: [^a-z]sirf
|
||||
|
||||
ARM/CONEXANT DIGICOLOR MACHINE SUPPORT
|
||||
M: Baruch Siach <baruch@tkos.co.il>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Maintained
|
||||
N: digicolor
|
||||
|
||||
ARM/EBSA110 MACHINE SUPPORT
|
||||
M: Russell King <linux@arm.linux.org.uk>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
|
@ -1439,9 +1444,10 @@ ARM/SOCFPGA ARCHITECTURE
|
|||
M: Dinh Nguyen <dinguyen@opensource.altera.com>
|
||||
S: Maintained
|
||||
F: arch/arm/mach-socfpga/
|
||||
F: arch/arm/boot/dts/socfpga*
|
||||
F: arch/arm/configs/socfpga_defconfig
|
||||
W: http://www.rocketboards.org
|
||||
T: git://git.rocketboards.org/linux-socfpga.git
|
||||
T: git://git.rocketboards.org/linux-socfpga-next.git
|
||||
T: git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
|
||||
|
||||
ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT
|
||||
M: Dinh Nguyen <dinguyen@opensource.altera.com>
|
||||
|
@ -2116,8 +2122,9 @@ S: Supported
|
|||
F: drivers/net/ethernet/broadcom/bnx2x/
|
||||
|
||||
BROADCOM BCM281XX/BCM11XXX/BCM216XX ARM ARCHITECTURE
|
||||
M: Christian Daudt <bcm@fixthebug.org>
|
||||
M: Florian Fainelli <f.fainelli@gmail.com>
|
||||
M: Ray Jui <rjui@broadcom.com>
|
||||
M: Scott Branden <sbranden@broadcom.com>
|
||||
L: bcm-kernel-feedback-list@broadcom.com
|
||||
T: git git://github.com/broadcom/mach-bcm
|
||||
S: Maintained
|
||||
|
@ -2168,7 +2175,6 @@ S: Maintained
|
|||
F: drivers/usb/gadget/udc/bcm63xx_udc.*
|
||||
|
||||
BROADCOM BCM7XXX ARM ARCHITECTURE
|
||||
M: Marc Carino <marc.ceeeee@gmail.com>
|
||||
M: Brian Norris <computersforpeace@gmail.com>
|
||||
M: Gregory Fong <gregory.0xf0@gmail.com>
|
||||
M: Florian Fainelli <f.fainelli@gmail.com>
|
||||
|
|
|
@ -49,7 +49,7 @@
|
|||
pinctrl-0 = <&matrix_keypad_pins>;
|
||||
|
||||
debounce-delay-ms = <5>;
|
||||
col-scan-delay-us = <1500>;
|
||||
col-scan-delay-us = <5>;
|
||||
|
||||
row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */
|
||||
&gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */
|
||||
|
@ -473,7 +473,7 @@
|
|||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <31 0>;
|
||||
|
||||
wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
|
||||
reset-gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
|
||||
|
||||
touchscreen-size-x = <480>;
|
||||
touchscreen-size-y = <272>;
|
||||
|
|
|
@ -18,6 +18,7 @@
|
|||
aliases {
|
||||
rtc0 = &mcp_rtc;
|
||||
rtc1 = &tps659038_rtc;
|
||||
rtc2 = &rtc;
|
||||
};
|
||||
|
||||
memory {
|
||||
|
@ -83,7 +84,7 @@
|
|||
gpio_fan: gpio_fan {
|
||||
/* Based on 5v 500mA AFB02505HHB */
|
||||
compatible = "gpio-fan";
|
||||
gpios = <&tps659038_gpio 1 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
|
||||
gpio-fan,speed-map = <0 0>,
|
||||
<13000 1>;
|
||||
#cooling-cells = <2>;
|
||||
|
@ -130,8 +131,8 @@
|
|||
|
||||
uart3_pins_default: uart3_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */
|
||||
0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */
|
||||
0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
|
||||
0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
|
||||
>;
|
||||
};
|
||||
|
||||
|
@ -455,7 +456,7 @@
|
|||
mcp_rtc: rtc@6f {
|
||||
compatible = "microchip,mcp7941x";
|
||||
reg = <0x6f>;
|
||||
interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>; /* IRQ_SYS_1N */
|
||||
interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>; /* IRQ_SYS_1N */
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcp79410_pins_default>;
|
||||
|
@ -478,7 +479,7 @@
|
|||
&uart3 {
|
||||
status = "okay";
|
||||
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<&dra7_pmx_core 0x248>;
|
||||
<&dra7_pmx_core 0x3f8>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart3_pins_default>;
|
||||
|
|
|
@ -105,6 +105,10 @@
|
|||
};
|
||||
|
||||
internal-regs {
|
||||
rtc@10300 {
|
||||
/* No crystal connected to the internal RTC */
|
||||
status = "disabled";
|
||||
};
|
||||
serial@12000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
@ -911,7 +911,7 @@
|
|||
ti,clock-cycles = <16>;
|
||||
|
||||
reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
|
||||
<0x4ae06014 0x4>, <0x4a003b20 0x8>,
|
||||
<0x4ae06014 0x4>, <0x4a003b20 0xc>,
|
||||
<0x4ae0c158 0x4>;
|
||||
reg-names = "setup-address", "control-address",
|
||||
"int-address", "efuse-address",
|
||||
|
@ -944,7 +944,7 @@
|
|||
ti,clock-cycles = <16>;
|
||||
|
||||
reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
|
||||
<0x4ae06010 0x4>, <0x4a0025cc 0x8>,
|
||||
<0x4ae06010 0x4>, <0x4a0025cc 0xc>,
|
||||
<0x4a002470 0x4>;
|
||||
reg-names = "setup-address", "control-address",
|
||||
"int-address", "efuse-address",
|
||||
|
@ -977,7 +977,7 @@
|
|||
ti,clock-cycles = <16>;
|
||||
|
||||
reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
|
||||
<0x4ae06010 0x4>, <0x4a0025e0 0x8>,
|
||||
<0x4ae06010 0x4>, <0x4a0025e0 0xc>,
|
||||
<0x4a00246c 0x4>;
|
||||
reg-names = "setup-address", "control-address",
|
||||
"int-address", "efuse-address",
|
||||
|
@ -1010,7 +1010,7 @@
|
|||
ti,clock-cycles = <16>;
|
||||
|
||||
reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
|
||||
<0x4ae06010 0x4>, <0x4a003b08 0x8>,
|
||||
<0x4ae06010 0x4>, <0x4a003b08 0xc>,
|
||||
<0x4ae0c154 0x4>;
|
||||
reg-names = "setup-address", "control-address",
|
||||
"int-address", "efuse-address",
|
||||
|
@ -1203,7 +1203,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
rtc@48838000 {
|
||||
rtc: rtc@48838000 {
|
||||
compatible = "ti,am3352-rtc";
|
||||
reg = <0x48838000 0x100>;
|
||||
interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
|
||||
|
|
|
@ -12,6 +12,7 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include "imx23.dtsi"
|
||||
|
||||
/ {
|
||||
|
@ -93,6 +94,7 @@
|
|||
|
||||
ahb@80080000 {
|
||||
usb0: usb@80080000 {
|
||||
dr_mode = "host";
|
||||
vbus-supply = <®_usb0_vbus>;
|
||||
status = "okay";
|
||||
};
|
||||
|
@ -122,7 +124,7 @@
|
|||
|
||||
user {
|
||||
label = "green";
|
||||
gpios = <&gpio2 1 1>;
|
||||
gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
|
@ -428,6 +428,7 @@
|
|||
|
||||
pwm4: pwm@53fc8000 {
|
||||
compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
|
||||
#pwm-cells = <2>;
|
||||
reg = <0x53fc8000 0x4000>;
|
||||
clocks = <&clks 108>, <&clks 52>;
|
||||
clock-names = "ipg", "per";
|
||||
|
|
|
@ -913,7 +913,7 @@
|
|||
80 81 68 69
|
||||
70 71 72 73
|
||||
74 75 76 77>;
|
||||
interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
|
||||
interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
|
||||
"saif0", "saif1", "i2c0", "i2c1",
|
||||
"auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
|
||||
"auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
|
||||
|
|
|
@ -31,6 +31,7 @@
|
|||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio4 15 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
reg_usb_h1_vbus: regulator@1 {
|
||||
|
@ -40,6 +41,7 @@
|
|||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
gpio = <&gpio1 0 0>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
@ -185,7 +185,6 @@
|
|||
&i2c3 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_i2c3>;
|
||||
pinctrl-assert-gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
|
||||
status = "okay";
|
||||
|
||||
max7310_a: gpio@30 {
|
||||
|
|
|
@ -498,6 +498,8 @@
|
|||
DRVDD-supply = <&vmmc2>;
|
||||
IOVDD-supply = <&vio>;
|
||||
DVDD-supply = <&vio>;
|
||||
|
||||
ai3x-micbias-vg = <1>;
|
||||
};
|
||||
|
||||
tlv320aic3x_aux: tlv320aic3x@19 {
|
||||
|
@ -509,6 +511,8 @@
|
|||
DRVDD-supply = <&vmmc2>;
|
||||
IOVDD-supply = <&vio>;
|
||||
DVDD-supply = <&vio>;
|
||||
|
||||
ai3x-micbias-vg = <2>;
|
||||
};
|
||||
|
||||
tsl2563: tsl2563@29 {
|
||||
|
|
|
@ -456,6 +456,7 @@
|
|||
};
|
||||
|
||||
mmu_isp: mmu@480bd400 {
|
||||
#iommu-cells = <0>;
|
||||
compatible = "ti,omap2-iommu";
|
||||
reg = <0x480bd400 0x80>;
|
||||
interrupts = <24>;
|
||||
|
@ -464,6 +465,7 @@
|
|||
};
|
||||
|
||||
mmu_iva: mmu@5d000000 {
|
||||
#iommu-cells = <0>;
|
||||
compatible = "ti,omap2-iommu";
|
||||
reg = <0x5d000000 0x80>;
|
||||
interrupts = <28>;
|
||||
|
|
|
@ -128,7 +128,7 @@
|
|||
* hierarchy.
|
||||
*/
|
||||
ocp {
|
||||
compatible = "ti,omap4-l3-noc", "simple-bus";
|
||||
compatible = "ti,omap5-l3-noc", "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
|
|
@ -545,7 +545,7 @@
|
|||
compatible = "adi,adv7511w";
|
||||
reg = <0x39>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <29 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
adi,input-depth = <8>;
|
||||
adi,input-colorspace = "rgb";
|
||||
|
|
|
@ -1017,23 +1017,6 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
vmmci: regulator-gpio {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
regulator-name = "mmci-reg";
|
||||
regulator-type = "voltage";
|
||||
|
||||
startup-delay-us = <100>;
|
||||
enable-active-high;
|
||||
|
||||
states = <1800000 0x1
|
||||
2900000 0x0>;
|
||||
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mcde@a0350000 {
|
||||
compatible = "stericsson,mcde";
|
||||
reg = <0xa0350000 0x1000>, /* MCDE */
|
||||
|
|
|
@ -111,6 +111,21 @@
|
|||
pinctrl-1 = <&i2c3_sleep_mode>;
|
||||
};
|
||||
|
||||
vmmci: regulator-gpio {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
regulator-name = "mmci-reg";
|
||||
regulator-type = "voltage";
|
||||
|
||||
startup-delay-us = <100>;
|
||||
enable-active-high;
|
||||
|
||||
states = <1800000 0x1
|
||||
2900000 0x0>;
|
||||
};
|
||||
|
||||
// External Micro SD slot
|
||||
sdi0_per1@80126000 {
|
||||
arm,primecell-periphid = <0x10480180>;
|
||||
|
|
|
@ -146,8 +146,21 @@
|
|||
};
|
||||
|
||||
vmmci: regulator-gpio {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
gpios = <&gpio7 4 0x4>;
|
||||
enable-gpio = <&gpio6 25 0x4>;
|
||||
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <2900000>;
|
||||
regulator-name = "mmci-reg";
|
||||
regulator-type = "voltage";
|
||||
|
||||
startup-delay-us = <100>;
|
||||
enable-active-high;
|
||||
|
||||
states = <1800000 0x1
|
||||
2900000 0x0>;
|
||||
};
|
||||
|
||||
// External Micro SD slot
|
||||
|
|
|
@ -39,11 +39,14 @@ CONFIG_ARCH_HIP04=y
|
|||
CONFIG_ARCH_KEYSTONE=y
|
||||
CONFIG_ARCH_MESON=y
|
||||
CONFIG_ARCH_MXC=y
|
||||
CONFIG_SOC_IMX50=y
|
||||
CONFIG_SOC_IMX51=y
|
||||
CONFIG_SOC_IMX53=y
|
||||
CONFIG_SOC_IMX6Q=y
|
||||
CONFIG_SOC_IMX6SL=y
|
||||
CONFIG_SOC_IMX6SX=y
|
||||
CONFIG_SOC_VF610=y
|
||||
CONFIG_SOC_LS1021A=y
|
||||
CONFIG_ARCH_OMAP3=y
|
||||
CONFIG_ARCH_OMAP4=y
|
||||
CONFIG_SOC_OMAP5=y
|
||||
|
|
|
@ -393,7 +393,7 @@ CONFIG_TI_EDMA=y
|
|||
CONFIG_DMA_OMAP=y
|
||||
# CONFIG_IOMMU_SUPPORT is not set
|
||||
CONFIG_EXTCON=m
|
||||
CONFIG_EXTCON_GPIO=m
|
||||
CONFIG_EXTCON_USB_GPIO=m
|
||||
CONFIG_EXTCON_PALMAS=m
|
||||
CONFIG_TI_EMIF=m
|
||||
CONFIG_PWM=y
|
||||
|
|
|
@ -1,5 +1,5 @@
|
|||
/*
|
||||
* Copyright (C) 2010 Pengutronix, Wolfram Sang <w.sang@pengutronix.de>
|
||||
* Copyright (C) 2010 Pengutronix, Wolfram Sang <kernel@pengutronix.de>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it under
|
||||
* the terms of the GNU General Public License version 2 as published by the
|
||||
|
|
|
@ -112,6 +112,7 @@
|
|||
#define OMAP3430_VC_CMD_ONLP_SHIFT 16
|
||||
#define OMAP3430_VC_CMD_RET_SHIFT 8
|
||||
#define OMAP3430_VC_CMD_OFF_SHIFT 0
|
||||
#define OMAP3430_SREN_MASK (1 << 4)
|
||||
#define OMAP3430_HSEN_MASK (1 << 3)
|
||||
#define OMAP3430_MCODE_MASK (0x7 << 0)
|
||||
#define OMAP3430_VALID_MASK (1 << 24)
|
||||
|
|
|
@ -35,6 +35,7 @@
|
|||
#define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT 1
|
||||
#define OMAP4430_GLOBAL_WUEN_MASK (1 << 16)
|
||||
#define OMAP4430_HSMCODE_MASK (0x7 << 0)
|
||||
#define OMAP4430_SRMODEEN_MASK (1 << 4)
|
||||
#define OMAP4430_HSMODEEN_MASK (1 << 3)
|
||||
#define OMAP4430_HSSCLL_SHIFT 24
|
||||
#define OMAP4430_ICEPICK_RST_SHIFT 9
|
||||
|
|
|
@ -316,7 +316,8 @@ static void __init omap3_vc_init_pmic_signaling(struct voltagedomain *voltdm)
|
|||
* idle. And we can also scale voltages to zero for off-idle.
|
||||
* Note that no actual voltage scaling during off-idle will
|
||||
* happen unless the board specific twl4030 PMIC scripts are
|
||||
* loaded.
|
||||
* loaded. See also omap_vc_i2c_init for comments regarding
|
||||
* erratum i531.
|
||||
*/
|
||||
val = voltdm->read(OMAP3_PRM_VOLTCTRL_OFFSET);
|
||||
if (!(val & OMAP3430_PRM_VOLTCTRL_SEL_OFF)) {
|
||||
|
@ -704,9 +705,16 @@ static void __init omap_vc_i2c_init(struct voltagedomain *voltdm)
|
|||
return;
|
||||
}
|
||||
|
||||
/*
|
||||
* Note that for omap3 OMAP3430_SREN_MASK clears SREN to work around
|
||||
* erratum i531 "Extra Power Consumed When Repeated Start Operation
|
||||
* Mode Is Enabled on I2C Interface Dedicated for Smart Reflex (I2C4)".
|
||||
* Otherwise I2C4 eventually leads into about 23mW extra power being
|
||||
* consumed even during off idle using VMODE.
|
||||
*/
|
||||
i2c_high_speed = voltdm->pmic->i2c_high_speed;
|
||||
if (i2c_high_speed)
|
||||
voltdm->rmw(vc->common->i2c_cfg_hsen_mask,
|
||||
voltdm->rmw(vc->common->i2c_cfg_clear_mask,
|
||||
vc->common->i2c_cfg_hsen_mask,
|
||||
vc->common->i2c_cfg_reg);
|
||||
|
||||
|
|
|
@ -34,6 +34,7 @@ struct voltagedomain;
|
|||
* @cmd_ret_shift: RET field shift in PRM_VC_CMD_VAL_* register
|
||||
* @cmd_off_shift: OFF field shift in PRM_VC_CMD_VAL_* register
|
||||
* @i2c_cfg_reg: I2C configuration register offset
|
||||
* @i2c_cfg_clear_mask: high-speed mode bit clear mask in I2C config register
|
||||
* @i2c_cfg_hsen_mask: high-speed mode bit field mask in I2C config register
|
||||
* @i2c_mcode_mask: MCODE field mask for I2C config register
|
||||
*
|
||||
|
@ -52,6 +53,7 @@ struct omap_vc_common {
|
|||
u8 cmd_ret_shift;
|
||||
u8 cmd_off_shift;
|
||||
u8 i2c_cfg_reg;
|
||||
u8 i2c_cfg_clear_mask;
|
||||
u8 i2c_cfg_hsen_mask;
|
||||
u8 i2c_mcode_mask;
|
||||
};
|
||||
|
|
|
@ -40,6 +40,7 @@ static struct omap_vc_common omap3_vc_common = {
|
|||
.cmd_onlp_shift = OMAP3430_VC_CMD_ONLP_SHIFT,
|
||||
.cmd_ret_shift = OMAP3430_VC_CMD_RET_SHIFT,
|
||||
.cmd_off_shift = OMAP3430_VC_CMD_OFF_SHIFT,
|
||||
.i2c_cfg_clear_mask = OMAP3430_SREN_MASK | OMAP3430_HSEN_MASK,
|
||||
.i2c_cfg_hsen_mask = OMAP3430_HSEN_MASK,
|
||||
.i2c_cfg_reg = OMAP3_PRM_VC_I2C_CFG_OFFSET,
|
||||
.i2c_mcode_mask = OMAP3430_MCODE_MASK,
|
||||
|
|
|
@ -42,6 +42,7 @@ static const struct omap_vc_common omap4_vc_common = {
|
|||
.cmd_ret_shift = OMAP4430_RET_SHIFT,
|
||||
.cmd_off_shift = OMAP4430_OFF_SHIFT,
|
||||
.i2c_cfg_reg = OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET,
|
||||
.i2c_cfg_clear_mask = OMAP4430_SRMODEEN_MASK | OMAP4430_HSMODEEN_MASK,
|
||||
.i2c_cfg_hsen_mask = OMAP4430_HSMODEEN_MASK,
|
||||
.i2c_mcode_mask = OMAP4430_HSMCODE_MASK,
|
||||
};
|
||||
|
|
|
@ -691,4 +691,13 @@ config SHARPSL_PM_MAX1111
|
|||
config PXA310_ULPI
|
||||
bool
|
||||
|
||||
config PXA_SYSTEMS_CPLDS
|
||||
tristate "Motherboard cplds"
|
||||
default ARCH_LUBBOCK || MACH_MAINSTONE
|
||||
help
|
||||
This driver supports the Lubbock and Mainstone multifunction chip
|
||||
found on the pxa25x development platform system (Lubbock) and pxa27x
|
||||
development platform system (Mainstone). This IO board supports the
|
||||
interrupts handling, ethernet controller, flash chips, etc ...
|
||||
|
||||
endif
|
||||
|
|
|
@ -90,4 +90,5 @@ obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR) += raumfeld.o
|
|||
obj-$(CONFIG_MACH_RAUMFELD_SPEAKER) += raumfeld.o
|
||||
obj-$(CONFIG_MACH_ZIPIT2) += z2.o
|
||||
|
||||
obj-$(CONFIG_PXA_SYSTEMS_CPLDS) += pxa_cplds_irqs.o
|
||||
obj-$(CONFIG_TOSA_BT) += tosa-bt.o
|
||||
|
|
|
@ -37,7 +37,9 @@
|
|||
#define LUB_GP __LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
|
||||
|
||||
/* Board specific IRQs */
|
||||
#define LUBBOCK_IRQ(x) (IRQ_BOARD_START + (x))
|
||||
#define LUBBOCK_NR_IRQS IRQ_BOARD_START
|
||||
|
||||
#define LUBBOCK_IRQ(x) (LUBBOCK_NR_IRQS + (x))
|
||||
#define LUBBOCK_SD_IRQ LUBBOCK_IRQ(0)
|
||||
#define LUBBOCK_SA1111_IRQ LUBBOCK_IRQ(1)
|
||||
#define LUBBOCK_USB_IRQ LUBBOCK_IRQ(2) /* usb connect */
|
||||
|
@ -47,8 +49,7 @@
|
|||
#define LUBBOCK_USB_DISC_IRQ LUBBOCK_IRQ(6) /* usb disconnect */
|
||||
#define LUBBOCK_LAST_IRQ LUBBOCK_IRQ(6)
|
||||
|
||||
#define LUBBOCK_SA1111_IRQ_BASE (IRQ_BOARD_START + 16)
|
||||
#define LUBBOCK_NR_IRQS (IRQ_BOARD_START + 16 + 55)
|
||||
#define LUBBOCK_SA1111_IRQ_BASE (LUBBOCK_NR_IRQS + 32)
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
|
||||
|
|
|
@ -120,7 +120,9 @@
|
|||
#define MST_PCMCIA_PWR_VCC_50 0x4 /* voltage VCC = 5.0V */
|
||||
|
||||
/* board specific IRQs */
|
||||
#define MAINSTONE_IRQ(x) (IRQ_BOARD_START + (x))
|
||||
#define MAINSTONE_NR_IRQS IRQ_BOARD_START
|
||||
|
||||
#define MAINSTONE_IRQ(x) (MAINSTONE_NR_IRQS + (x))
|
||||
#define MAINSTONE_MMC_IRQ MAINSTONE_IRQ(0)
|
||||
#define MAINSTONE_USIM_IRQ MAINSTONE_IRQ(1)
|
||||
#define MAINSTONE_USBC_IRQ MAINSTONE_IRQ(2)
|
||||
|
@ -136,6 +138,4 @@
|
|||
#define MAINSTONE_S1_STSCHG_IRQ MAINSTONE_IRQ(14)
|
||||
#define MAINSTONE_S1_IRQ MAINSTONE_IRQ(15)
|
||||
|
||||
#define MAINSTONE_NR_IRQS (IRQ_BOARD_START + 16)
|
||||
|
||||
#endif
|
||||
|
|
|
@ -12,6 +12,7 @@
|
|||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/gpio/machine.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/init.h>
|
||||
|
@ -123,84 +124,6 @@ void lubbock_set_misc_wr(unsigned int mask, unsigned int set)
|
|||
}
|
||||
EXPORT_SYMBOL(lubbock_set_misc_wr);
|
||||
|
||||
static unsigned long lubbock_irq_enabled;
|
||||
|
||||
static void lubbock_mask_irq(struct irq_data *d)
|
||||
{
|
||||
int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
|
||||
LUB_IRQ_MASK_EN = (lubbock_irq_enabled &= ~(1 << lubbock_irq));
|
||||
}
|
||||
|
||||
static void lubbock_unmask_irq(struct irq_data *d)
|
||||
{
|
||||
int lubbock_irq = (d->irq - LUBBOCK_IRQ(0));
|
||||
/* the irq can be acknowledged only if deasserted, so it's done here */
|
||||
LUB_IRQ_SET_CLR &= ~(1 << lubbock_irq);
|
||||
LUB_IRQ_MASK_EN = (lubbock_irq_enabled |= (1 << lubbock_irq));
|
||||
}
|
||||
|
||||
static struct irq_chip lubbock_irq_chip = {
|
||||
.name = "FPGA",
|
||||
.irq_ack = lubbock_mask_irq,
|
||||
.irq_mask = lubbock_mask_irq,
|
||||
.irq_unmask = lubbock_unmask_irq,
|
||||
};
|
||||
|
||||
static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
|
||||
{
|
||||
unsigned long pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
|
||||
do {
|
||||
/* clear our parent irq */
|
||||
desc->irq_data.chip->irq_ack(&desc->irq_data);
|
||||
if (likely(pending)) {
|
||||
irq = LUBBOCK_IRQ(0) + __ffs(pending);
|
||||
generic_handle_irq(irq);
|
||||
}
|
||||
pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
|
||||
} while (pending);
|
||||
}
|
||||
|
||||
static void __init lubbock_init_irq(void)
|
||||
{
|
||||
int irq;
|
||||
|
||||
pxa25x_init_irq();
|
||||
|
||||
/* setup extra lubbock irqs */
|
||||
for (irq = LUBBOCK_IRQ(0); irq <= LUBBOCK_LAST_IRQ; irq++) {
|
||||
irq_set_chip_and_handler(irq, &lubbock_irq_chip,
|
||||
handle_level_irq);
|
||||
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
|
||||
}
|
||||
|
||||
irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), lubbock_irq_handler);
|
||||
irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
|
||||
static void lubbock_irq_resume(void)
|
||||
{
|
||||
LUB_IRQ_MASK_EN = lubbock_irq_enabled;
|
||||
}
|
||||
|
||||
static struct syscore_ops lubbock_irq_syscore_ops = {
|
||||
.resume = lubbock_irq_resume,
|
||||
};
|
||||
|
||||
static int __init lubbock_irq_device_init(void)
|
||||
{
|
||||
if (machine_is_lubbock()) {
|
||||
register_syscore_ops(&lubbock_irq_syscore_ops);
|
||||
return 0;
|
||||
}
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
device_initcall(lubbock_irq_device_init);
|
||||
|
||||
#endif
|
||||
|
||||
static int lubbock_udc_is_connected(void)
|
||||
{
|
||||
return (LUB_MISC_RD & (1 << 9)) == 0;
|
||||
|
@ -383,11 +306,38 @@ static struct platform_device lubbock_flash_device[2] = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct resource lubbock_cplds_resources[] = {
|
||||
[0] = {
|
||||
.start = LUBBOCK_FPGA_PHYS + 0xc0,
|
||||
.end = LUBBOCK_FPGA_PHYS + 0xe0 - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.start = PXA_GPIO_TO_IRQ(0),
|
||||
.end = PXA_GPIO_TO_IRQ(0),
|
||||
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
|
||||
},
|
||||
[2] = {
|
||||
.start = LUBBOCK_IRQ(0),
|
||||
.end = LUBBOCK_IRQ(6),
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device lubbock_cplds_device = {
|
||||
.name = "pxa_cplds_irqs",
|
||||
.id = -1,
|
||||
.resource = &lubbock_cplds_resources[0],
|
||||
.num_resources = 3,
|
||||
};
|
||||
|
||||
|
||||
static struct platform_device *devices[] __initdata = {
|
||||
&sa1111_device,
|
||||
&smc91x_device,
|
||||
&lubbock_flash_device[0],
|
||||
&lubbock_flash_device[1],
|
||||
&lubbock_cplds_device,
|
||||
};
|
||||
|
||||
static struct pxafb_mode_info sharp_lm8v31_mode = {
|
||||
|
@ -648,7 +598,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)")
|
|||
/* Maintainer: MontaVista Software Inc. */
|
||||
.map_io = lubbock_map_io,
|
||||
.nr_irqs = LUBBOCK_NR_IRQS,
|
||||
.init_irq = lubbock_init_irq,
|
||||
.init_irq = pxa25x_init_irq,
|
||||
.handle_irq = pxa25x_handle_irq,
|
||||
.init_time = pxa_timer_init,
|
||||
.init_machine = lubbock_init,
|
||||
|
|
|
@ -13,6 +13,7 @@
|
|||
* published by the Free Software Foundation.
|
||||
*/
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/gpio/machine.h>
|
||||
#include <linux/init.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/syscore_ops.h>
|
||||
|
@ -122,92 +123,6 @@ static unsigned long mainstone_pin_config[] = {
|
|||
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
|
||||
};
|
||||
|
||||
static unsigned long mainstone_irq_enabled;
|
||||
|
||||
static void mainstone_mask_irq(struct irq_data *d)
|
||||
{
|
||||
int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
|
||||
MST_INTMSKENA = (mainstone_irq_enabled &= ~(1 << mainstone_irq));
|
||||
}
|
||||
|
||||
static void mainstone_unmask_irq(struct irq_data *d)
|
||||
{
|
||||
int mainstone_irq = (d->irq - MAINSTONE_IRQ(0));
|
||||
/* the irq can be acknowledged only if deasserted, so it's done here */
|
||||
MST_INTSETCLR &= ~(1 << mainstone_irq);
|
||||
MST_INTMSKENA = (mainstone_irq_enabled |= (1 << mainstone_irq));
|
||||
}
|
||||
|
||||
static struct irq_chip mainstone_irq_chip = {
|
||||
.name = "FPGA",
|
||||
.irq_ack = mainstone_mask_irq,
|
||||
.irq_mask = mainstone_mask_irq,
|
||||
.irq_unmask = mainstone_unmask_irq,
|
||||
};
|
||||
|
||||
static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
|
||||
{
|
||||
unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled;
|
||||
do {
|
||||
/* clear useless edge notification */
|
||||
desc->irq_data.chip->irq_ack(&desc->irq_data);
|
||||
if (likely(pending)) {
|
||||
irq = MAINSTONE_IRQ(0) + __ffs(pending);
|
||||
generic_handle_irq(irq);
|
||||
}
|
||||
pending = MST_INTSETCLR & mainstone_irq_enabled;
|
||||
} while (pending);
|
||||
}
|
||||
|
||||
static void __init mainstone_init_irq(void)
|
||||
{
|
||||
int irq;
|
||||
|
||||
pxa27x_init_irq();
|
||||
|
||||
/* setup extra Mainstone irqs */
|
||||
for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
|
||||
irq_set_chip_and_handler(irq, &mainstone_irq_chip,
|
||||
handle_level_irq);
|
||||
if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
|
||||
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
|
||||
else
|
||||
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
|
||||
}
|
||||
set_irq_flags(MAINSTONE_IRQ(8), 0);
|
||||
set_irq_flags(MAINSTONE_IRQ(12), 0);
|
||||
|
||||
MST_INTMSKENA = 0;
|
||||
MST_INTSETCLR = 0;
|
||||
|
||||
irq_set_chained_handler(PXA_GPIO_TO_IRQ(0), mainstone_irq_handler);
|
||||
irq_set_irq_type(PXA_GPIO_TO_IRQ(0), IRQ_TYPE_EDGE_FALLING);
|
||||
}
|
||||
|
||||
#ifdef CONFIG_PM
|
||||
|
||||
static void mainstone_irq_resume(void)
|
||||
{
|
||||
MST_INTMSKENA = mainstone_irq_enabled;
|
||||
}
|
||||
|
||||
static struct syscore_ops mainstone_irq_syscore_ops = {
|
||||
.resume = mainstone_irq_resume,
|
||||
};
|
||||
|
||||
static int __init mainstone_irq_device_init(void)
|
||||
{
|
||||
if (machine_is_mainstone())
|
||||
register_syscore_ops(&mainstone_irq_syscore_ops);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
device_initcall(mainstone_irq_device_init);
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
static struct resource smc91x_resources[] = {
|
||||
[0] = {
|
||||
.start = (MST_ETH_PHYS + 0x300),
|
||||
|
@ -487,11 +402,37 @@ static struct platform_device mst_gpio_keys_device = {
|
|||
},
|
||||
};
|
||||
|
||||
static struct resource mst_cplds_resources[] = {
|
||||
[0] = {
|
||||
.start = MST_FPGA_PHYS + 0xc0,
|
||||
.end = MST_FPGA_PHYS + 0xe0 - 1,
|
||||
.flags = IORESOURCE_MEM,
|
||||
},
|
||||
[1] = {
|
||||
.start = PXA_GPIO_TO_IRQ(0),
|
||||
.end = PXA_GPIO_TO_IRQ(0),
|
||||
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
|
||||
},
|
||||
[2] = {
|
||||
.start = MAINSTONE_IRQ(0),
|
||||
.end = MAINSTONE_IRQ(15),
|
||||
.flags = IORESOURCE_IRQ,
|
||||
},
|
||||
};
|
||||
|
||||
static struct platform_device mst_cplds_device = {
|
||||
.name = "pxa_cplds_irqs",
|
||||
.id = -1,
|
||||
.resource = &mst_cplds_resources[0],
|
||||
.num_resources = 3,
|
||||
};
|
||||
|
||||
static struct platform_device *platform_devices[] __initdata = {
|
||||
&smc91x_device,
|
||||
&mst_flash_device[0],
|
||||
&mst_flash_device[1],
|
||||
&mst_gpio_keys_device,
|
||||
&mst_cplds_device,
|
||||
};
|
||||
|
||||
static struct pxaohci_platform_data mainstone_ohci_platform_data = {
|
||||
|
@ -718,7 +659,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
|
|||
.atag_offset = 0x100, /* BLOB boot parameter setting */
|
||||
.map_io = mainstone_map_io,
|
||||
.nr_irqs = MAINSTONE_NR_IRQS,
|
||||
.init_irq = mainstone_init_irq,
|
||||
.init_irq = pxa27x_init_irq,
|
||||
.handle_irq = pxa27x_handle_irq,
|
||||
.init_time = pxa_timer_init,
|
||||
.init_machine = mainstone_init,
|
||||
|
|
|
@ -0,0 +1,200 @@
|
|||
/*
|
||||
* Intel Reference Systems cplds
|
||||
*
|
||||
* Copyright (C) 2014 Robert Jarzmik
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* Cplds motherboard driver, supporting lubbock and mainstone SoC board.
|
||||
*/
|
||||
|
||||
#include <linux/bitops.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/gpio/consumer.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/irq.h>
|
||||
#include <linux/irqdomain.h>
|
||||
#include <linux/mfd/core.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/of_platform.h>
|
||||
|
||||
#define FPGA_IRQ_MASK_EN 0x0
|
||||
#define FPGA_IRQ_SET_CLR 0x10
|
||||
|
||||
#define CPLDS_NB_IRQ 32
|
||||
|
||||
struct cplds {
|
||||
void __iomem *base;
|
||||
int irq;
|
||||
unsigned int irq_mask;
|
||||
struct gpio_desc *gpio0;
|
||||
struct irq_domain *irqdomain;
|
||||
};
|
||||
|
||||
static irqreturn_t cplds_irq_handler(int in_irq, void *d)
|
||||
{
|
||||
struct cplds *fpga = d;
|
||||
unsigned long pending;
|
||||
unsigned int bit;
|
||||
|
||||
pending = readl(fpga->base + FPGA_IRQ_SET_CLR) & fpga->irq_mask;
|
||||
for_each_set_bit(bit, &pending, CPLDS_NB_IRQ)
|
||||
generic_handle_irq(irq_find_mapping(fpga->irqdomain, bit));
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static void cplds_irq_mask_ack(struct irq_data *d)
|
||||
{
|
||||
struct cplds *fpga = irq_data_get_irq_chip_data(d);
|
||||
unsigned int cplds_irq = irqd_to_hwirq(d);
|
||||
unsigned int set, bit = BIT(cplds_irq);
|
||||
|
||||
fpga->irq_mask &= ~bit;
|
||||
writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
|
||||
set = readl(fpga->base + FPGA_IRQ_SET_CLR);
|
||||
writel(set & ~bit, fpga->base + FPGA_IRQ_SET_CLR);
|
||||
}
|
||||
|
||||
static void cplds_irq_unmask(struct irq_data *d)
|
||||
{
|
||||
struct cplds *fpga = irq_data_get_irq_chip_data(d);
|
||||
unsigned int cplds_irq = irqd_to_hwirq(d);
|
||||
unsigned int bit = BIT(cplds_irq);
|
||||
|
||||
fpga->irq_mask |= bit;
|
||||
writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
|
||||
}
|
||||
|
||||
static struct irq_chip cplds_irq_chip = {
|
||||
.name = "pxa_cplds",
|
||||
.irq_mask_ack = cplds_irq_mask_ack,
|
||||
.irq_unmask = cplds_irq_unmask,
|
||||
.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
|
||||
};
|
||||
|
||||
static int cplds_irq_domain_map(struct irq_domain *d, unsigned int irq,
|
||||
irq_hw_number_t hwirq)
|
||||
{
|
||||
struct cplds *fpga = d->host_data;
|
||||
|
||||
irq_set_chip_and_handler(irq, &cplds_irq_chip, handle_level_irq);
|
||||
irq_set_chip_data(irq, fpga);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct irq_domain_ops cplds_irq_domain_ops = {
|
||||
.xlate = irq_domain_xlate_twocell,
|
||||
.map = cplds_irq_domain_map,
|
||||
};
|
||||
|
||||
static int cplds_resume(struct platform_device *pdev)
|
||||
{
|
||||
struct cplds *fpga = platform_get_drvdata(pdev);
|
||||
|
||||
writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int cplds_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct resource *res;
|
||||
struct cplds *fpga;
|
||||
int ret;
|
||||
unsigned int base_irq = 0;
|
||||
unsigned long irqflags = 0;
|
||||
|
||||
fpga = devm_kzalloc(&pdev->dev, sizeof(*fpga), GFP_KERNEL);
|
||||
if (!fpga)
|
||||
return -ENOMEM;
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
||||
if (res) {
|
||||
fpga->irq = (unsigned int)res->start;
|
||||
irqflags = res->flags;
|
||||
}
|
||||
if (!fpga->irq)
|
||||
return -ENODEV;
|
||||
|
||||
base_irq = platform_get_irq(pdev, 1);
|
||||
if (base_irq < 0)
|
||||
base_irq = 0;
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
fpga->base = devm_ioremap_resource(&pdev->dev, res);
|
||||
if (IS_ERR(fpga->base))
|
||||
return PTR_ERR(fpga->base);
|
||||
|
||||
platform_set_drvdata(pdev, fpga);
|
||||
|
||||
writel(fpga->irq_mask, fpga->base + FPGA_IRQ_MASK_EN);
|
||||
writel(0, fpga->base + FPGA_IRQ_SET_CLR);
|
||||
|
||||
ret = devm_request_irq(&pdev->dev, fpga->irq, cplds_irq_handler,
|
||||
irqflags, dev_name(&pdev->dev), fpga);
|
||||
if (ret == -ENOSYS)
|
||||
return -EPROBE_DEFER;
|
||||
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "couldn't request main irq%d: %d\n",
|
||||
fpga->irq, ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
irq_set_irq_wake(fpga->irq, 1);
|
||||
fpga->irqdomain = irq_domain_add_linear(pdev->dev.of_node,
|
||||
CPLDS_NB_IRQ,
|
||||
&cplds_irq_domain_ops, fpga);
|
||||
if (!fpga->irqdomain)
|
||||
return -ENODEV;
|
||||
|
||||
if (base_irq) {
|
||||
ret = irq_create_strict_mappings(fpga->irqdomain, base_irq, 0,
|
||||
CPLDS_NB_IRQ);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "couldn't create the irq mapping %d..%d\n",
|
||||
base_irq, base_irq + CPLDS_NB_IRQ);
|
||||
return ret;
|
||||
}
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int cplds_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct cplds *fpga = platform_get_drvdata(pdev);
|
||||
|
||||
irq_set_chip_and_handler(fpga->irq, NULL, NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id cplds_id_table[] = {
|
||||
{ .compatible = "intel,lubbock-cplds-irqs", },
|
||||
{ .compatible = "intel,mainstone-cplds-irqs", },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, cplds_id_table);
|
||||
|
||||
static struct platform_driver cplds_driver = {
|
||||
.driver = {
|
||||
.name = "pxa_cplds_irqs",
|
||||
.of_match_table = of_match_ptr(cplds_id_table),
|
||||
},
|
||||
.probe = cplds_probe,
|
||||
.remove = cplds_remove,
|
||||
.resume = cplds_resume,
|
||||
};
|
||||
|
||||
module_platform_driver(cplds_driver);
|
||||
|
||||
MODULE_DESCRIPTION("PXA Cplds interrupts driver");
|
||||
MODULE_AUTHOR("Robert Jarzmik <robert.jarzmik@free.fr>");
|
||||
MODULE_LICENSE("GPL");
|
|
@ -44,9 +44,11 @@ static void __iomem *rk3288_bootram_base;
|
|||
static phys_addr_t rk3288_bootram_phy;
|
||||
|
||||
static struct regmap *pmu_regmap;
|
||||
static struct regmap *grf_regmap;
|
||||
static struct regmap *sgrf_regmap;
|
||||
|
||||
static u32 rk3288_pmu_pwr_mode_con;
|
||||
static u32 rk3288_grf_soc_con0;
|
||||
static u32 rk3288_sgrf_soc_con0;
|
||||
|
||||
static inline u32 rk3288_l2_config(void)
|
||||
|
@ -70,11 +72,25 @@ static void rk3288_slp_mode_set(int level)
|
|||
{
|
||||
u32 mode_set, mode_set1;
|
||||
|
||||
regmap_read(grf_regmap, RK3288_GRF_SOC_CON0, &rk3288_grf_soc_con0);
|
||||
|
||||
regmap_read(sgrf_regmap, RK3288_SGRF_SOC_CON0, &rk3288_sgrf_soc_con0);
|
||||
|
||||
regmap_read(pmu_regmap, RK3288_PMU_PWRMODE_CON,
|
||||
&rk3288_pmu_pwr_mode_con);
|
||||
|
||||
/*
|
||||
* We need set this bit GRF_FORCE_JTAG here, for the debug module,
|
||||
* otherwise, it may become inaccessible after resume.
|
||||
* This creates a potential security issue, as the sdmmc pins may
|
||||
* accept jtag data for a short time during resume if no card is
|
||||
* inserted.
|
||||
* But this is of course also true for the regular boot, before we
|
||||
* turn of the jtag/sdmmc autodetect.
|
||||
*/
|
||||
regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, GRF_FORCE_JTAG |
|
||||
GRF_FORCE_JTAG_WRITE);
|
||||
|
||||
/*
|
||||
* SGRF_FAST_BOOT_EN - system to boot from FAST_BOOT_ADDR
|
||||
* PCLK_WDT_GATE - disable WDT during suspend.
|
||||
|
@ -83,6 +99,13 @@ static void rk3288_slp_mode_set(int level)
|
|||
SGRF_PCLK_WDT_GATE | SGRF_FAST_BOOT_EN
|
||||
| SGRF_PCLK_WDT_GATE_WRITE | SGRF_FAST_BOOT_EN_WRITE);
|
||||
|
||||
/*
|
||||
* The dapswjdp can not auto reset before resume, that cause it may
|
||||
* access some illegal address during resume. Let's disable it before
|
||||
* suspend, and the MASKROM will enable it back.
|
||||
*/
|
||||
regmap_write(sgrf_regmap, RK3288_SGRF_CPU_CON0, SGRF_DAPDEVICEEN_WRITE);
|
||||
|
||||
/* booting address of resuming system is from this register value */
|
||||
regmap_write(sgrf_regmap, RK3288_SGRF_FAST_BOOT_ADDR,
|
||||
rk3288_bootram_phy);
|
||||
|
@ -128,6 +151,9 @@ static void rk3288_slp_mode_set_resume(void)
|
|||
regmap_write(sgrf_regmap, RK3288_SGRF_SOC_CON0,
|
||||
rk3288_sgrf_soc_con0 | SGRF_PCLK_WDT_GATE_WRITE
|
||||
| SGRF_FAST_BOOT_EN_WRITE);
|
||||
|
||||
regmap_write(grf_regmap, RK3288_GRF_SOC_CON0, rk3288_grf_soc_con0 |
|
||||
GRF_FORCE_JTAG_WRITE);
|
||||
}
|
||||
|
||||
static int rockchip_lpmode_enter(unsigned long arg)
|
||||
|
@ -186,6 +212,13 @@ static int rk3288_suspend_init(struct device_node *np)
|
|||
return PTR_ERR(pmu_regmap);
|
||||
}
|
||||
|
||||
grf_regmap = syscon_regmap_lookup_by_compatible(
|
||||
"rockchip,rk3288-grf");
|
||||
if (IS_ERR(grf_regmap)) {
|
||||
pr_err("%s: could not find grf regmap\n", __func__);
|
||||
return PTR_ERR(pmu_regmap);
|
||||
}
|
||||
|
||||
sram_np = of_find_compatible_node(NULL, NULL,
|
||||
"rockchip,rk3288-pmu-sram");
|
||||
if (!sram_np) {
|
||||
|
|
|
@ -48,6 +48,10 @@ static inline void rockchip_suspend_init(void)
|
|||
#define RK3288_PMU_WAKEUP_RST_CLR_CNT 0x44
|
||||
#define RK3288_PMU_PWRMODE_CON1 0x90
|
||||
|
||||
#define RK3288_GRF_SOC_CON0 0x244
|
||||
#define GRF_FORCE_JTAG BIT(12)
|
||||
#define GRF_FORCE_JTAG_WRITE BIT(28)
|
||||
|
||||
#define RK3288_SGRF_SOC_CON0 (0x0000)
|
||||
#define RK3288_SGRF_FAST_BOOT_ADDR (0x0120)
|
||||
#define SGRF_PCLK_WDT_GATE BIT(6)
|
||||
|
@ -55,6 +59,10 @@ static inline void rockchip_suspend_init(void)
|
|||
#define SGRF_FAST_BOOT_EN BIT(8)
|
||||
#define SGRF_FAST_BOOT_EN_WRITE BIT(24)
|
||||
|
||||
#define RK3288_SGRF_CPU_CON0 (0x40)
|
||||
#define SGRF_DAPDEVICEEN BIT(0)
|
||||
#define SGRF_DAPDEVICEEN_WRITE BIT(16)
|
||||
|
||||
#define RK3288_CRU_MODE_CON 0x50
|
||||
#define RK3288_CRU_SEL0_CON 0x60
|
||||
#define RK3288_CRU_SEL1_CON 0x64
|
||||
|
|
|
@ -30,11 +30,30 @@
|
|||
#include "pm.h"
|
||||
|
||||
#define RK3288_GRF_SOC_CON0 0x244
|
||||
#define RK3288_TIMER6_7_PHYS 0xff810000
|
||||
|
||||
static void __init rockchip_timer_init(void)
|
||||
{
|
||||
if (of_machine_is_compatible("rockchip,rk3288")) {
|
||||
struct regmap *grf;
|
||||
void __iomem *reg_base;
|
||||
|
||||
/*
|
||||
* Most/all uboot versions for rk3288 don't enable timer7
|
||||
* which is needed for the architected timer to work.
|
||||
* So make sure it is running during early boot.
|
||||
*/
|
||||
reg_base = ioremap(RK3288_TIMER6_7_PHYS, SZ_16K);
|
||||
if (reg_base) {
|
||||
writel(0, reg_base + 0x30);
|
||||
writel(0xffffffff, reg_base + 0x20);
|
||||
writel(0xffffffff, reg_base + 0x24);
|
||||
writel(1, reg_base + 0x30);
|
||||
dsb();
|
||||
iounmap(reg_base);
|
||||
} else {
|
||||
pr_err("rockchip: could not map timer7 registers\n");
|
||||
}
|
||||
|
||||
/*
|
||||
* Disable auto jtag/sdmmc switching that causes issues
|
||||
|
|
|
@ -660,7 +660,7 @@ validate_group(struct perf_event *event)
|
|||
* Initialise the fake PMU. We only need to populate the
|
||||
* used_mask for the purposes of validation.
|
||||
*/
|
||||
.used_mask = CPU_BITS_NONE,
|
||||
.used_mask = { 0 },
|
||||
};
|
||||
|
||||
if (!validate_event(event->pmu, &fake_pmu, leader))
|
||||
|
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
* OMAP L3 Interconnect error handling driver
|
||||
*
|
||||
* Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/
|
||||
* Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/
|
||||
* Santosh Shilimkar <santosh.shilimkar@ti.com>
|
||||
* Sricharan <r.sricharan@ti.com>
|
||||
*
|
||||
|
@ -233,7 +233,8 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3)
|
|||
}
|
||||
|
||||
static const struct of_device_id l3_noc_match[] = {
|
||||
{.compatible = "ti,omap4-l3-noc", .data = &omap_l3_data},
|
||||
{.compatible = "ti,omap4-l3-noc", .data = &omap4_l3_data},
|
||||
{.compatible = "ti,omap5-l3-noc", .data = &omap5_l3_data},
|
||||
{.compatible = "ti,dra7-l3-noc", .data = &dra_l3_data},
|
||||
{.compatible = "ti,am4372-l3-noc", .data = &am4372_l3_data},
|
||||
{},
|
||||
|
|
|
@ -1,7 +1,7 @@
|
|||
/*
|
||||
* OMAP L3 Interconnect error handling driver header
|
||||
*
|
||||
* Copyright (C) 2011-2014 Texas Instruments Incorporated - http://www.ti.com/
|
||||
* Copyright (C) 2011-2015 Texas Instruments Incorporated - http://www.ti.com/
|
||||
* Santosh Shilimkar <santosh.shilimkar@ti.com>
|
||||
* sricharan <r.sricharan@ti.com>
|
||||
*
|
||||
|
@ -175,16 +175,14 @@ static struct l3_flagmux_data omap_l3_flagmux_clk2 = {
|
|||
};
|
||||
|
||||
|
||||
static struct l3_target_data omap_l3_target_data_clk3[] = {
|
||||
{0x0100, "EMUSS",},
|
||||
{0x0300, "DEBUG SOURCE",},
|
||||
{0x0, "HOST CLK3",},
|
||||
static struct l3_target_data omap4_l3_target_data_clk3[] = {
|
||||
{0x0100, "DEBUGSS",},
|
||||
};
|
||||
|
||||
static struct l3_flagmux_data omap_l3_flagmux_clk3 = {
|
||||
static struct l3_flagmux_data omap4_l3_flagmux_clk3 = {
|
||||
.offset = 0x0200,
|
||||
.l3_targ = omap_l3_target_data_clk3,
|
||||
.num_targ_data = ARRAY_SIZE(omap_l3_target_data_clk3),
|
||||
.l3_targ = omap4_l3_target_data_clk3,
|
||||
.num_targ_data = ARRAY_SIZE(omap4_l3_target_data_clk3),
|
||||
};
|
||||
|
||||
static struct l3_masters_data omap_l3_masters[] = {
|
||||
|
@ -215,21 +213,49 @@ static struct l3_masters_data omap_l3_masters[] = {
|
|||
{ 0x32, "USBHOSTFS"}
|
||||
};
|
||||
|
||||
static struct l3_flagmux_data *omap_l3_flagmux[] = {
|
||||
static struct l3_flagmux_data *omap4_l3_flagmux[] = {
|
||||
&omap_l3_flagmux_clk1,
|
||||
&omap_l3_flagmux_clk2,
|
||||
&omap_l3_flagmux_clk3,
|
||||
&omap4_l3_flagmux_clk3,
|
||||
};
|
||||
|
||||
static const struct omap_l3 omap_l3_data = {
|
||||
.l3_flagmux = omap_l3_flagmux,
|
||||
.num_modules = ARRAY_SIZE(omap_l3_flagmux),
|
||||
static const struct omap_l3 omap4_l3_data = {
|
||||
.l3_flagmux = omap4_l3_flagmux,
|
||||
.num_modules = ARRAY_SIZE(omap4_l3_flagmux),
|
||||
.l3_masters = omap_l3_masters,
|
||||
.num_masters = ARRAY_SIZE(omap_l3_masters),
|
||||
/* The 6 MSBs of register field used to distinguish initiator */
|
||||
.mst_addr_mask = 0xFC,
|
||||
};
|
||||
|
||||
/* OMAP5 data */
|
||||
static struct l3_target_data omap5_l3_target_data_clk3[] = {
|
||||
{0x0100, "L3INSTR",},
|
||||
{0x0300, "DEBUGSS",},
|
||||
{0x0, "HOSTCLK3",},
|
||||
};
|
||||
|
||||
static struct l3_flagmux_data omap5_l3_flagmux_clk3 = {
|
||||
.offset = 0x0200,
|
||||
.l3_targ = omap5_l3_target_data_clk3,
|
||||
.num_targ_data = ARRAY_SIZE(omap5_l3_target_data_clk3),
|
||||
};
|
||||
|
||||
static struct l3_flagmux_data *omap5_l3_flagmux[] = {
|
||||
&omap_l3_flagmux_clk1,
|
||||
&omap_l3_flagmux_clk2,
|
||||
&omap5_l3_flagmux_clk3,
|
||||
};
|
||||
|
||||
static const struct omap_l3 omap5_l3_data = {
|
||||
.l3_flagmux = omap5_l3_flagmux,
|
||||
.num_modules = ARRAY_SIZE(omap5_l3_flagmux),
|
||||
.l3_masters = omap_l3_masters,
|
||||
.num_masters = ARRAY_SIZE(omap_l3_masters),
|
||||
/* The 6 MSBs of register field used to distinguish initiator */
|
||||
.mst_addr_mask = 0x7E0,
|
||||
};
|
||||
|
||||
/* DRA7 data */
|
||||
static struct l3_target_data dra_l3_target_data_clk1[] = {
|
||||
{0x2a00, "AES1",},
|
||||
|
@ -274,7 +300,7 @@ static struct l3_flagmux_data dra_l3_flagmux_clk1 = {
|
|||
|
||||
static struct l3_target_data dra_l3_target_data_clk2[] = {
|
||||
{0x0, "HOST CLK1",},
|
||||
{0x0, "HOST CLK2",},
|
||||
{0x800000, "HOST CLK2",},
|
||||
{0xdead, L3_TARGET_NOT_SUPPORTED,},
|
||||
{0x3400, "SHA2_2",},
|
||||
{0x0900, "BB2D",},
|
||||
|
|
Loading…
Reference in New Issue