diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd new file mode 100644 index 000000000000..90a87e2a572b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-rbd @@ -0,0 +1,83 @@ +What: /sys/bus/rbd/ +Date: November 2010 +Contact: Yehuda Sadeh , + Sage Weil +Description: + +Being used for adding and removing rbd block devices. + +Usage: [snap name] + + $ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add + +The snapshot name can be "-" or omitted to map the image read/write. A +will be assigned for any registered block device. If snapshot is used, it will +be mapped read-only. + +Removal of a device: + + $ echo > /sys/bus/rbd/remove + +Entries under /sys/bus/rbd/devices// +-------------------------------------------- + +client_id + + The ceph unique client id that was assigned for this specific session. + +major + + The block device major number. + +name + + The name of the rbd image. + +pool + + The pool where this rbd image resides. The pool-name pair is unique + per rados system. + +size + + The size (in bytes) of the mapped block device. + +refresh + + Writing to this file will reread the image header data and set + all relevant datastructures accordingly. + +current_snap + + The current snapshot for which the device is mapped. + +create_snap + + Create a snapshot: + + $ echo > /sys/bus/rbd/devices//snap_create + +rollback_snap + + Rolls back data to the specified snapshot. This goes over the entire + list of rados blocks and sends a rollback command to each. + + $ echo > /sys/bus/rbd/devices//snap_rollback + +snap_* + + A directory per each snapshot + + +Entries under /sys/bus/rbd/devices//snap_ +------------------------------------------------------------- + +id + + The rados internal snapshot id assigned for this snapshot + +size + + The size of the image when this snapshot was taken. + + diff --git a/Documentation/ABI/testing/sysfs-platform-asus-laptop b/Documentation/ABI/testing/sysfs-platform-asus-laptop index 1d775390e856..41ff8ae4dee0 100644 --- a/Documentation/ABI/testing/sysfs-platform-asus-laptop +++ b/Documentation/ABI/testing/sysfs-platform-asus-laptop @@ -47,6 +47,20 @@ Date: January 2007 KernelVersion: 2.6.20 Contact: "Corentin Chary" Description: - Control the bluetooth device. 1 means on, 0 means off. + Control the wlan device. 1 means on, 0 means off. This may control the led, the device or both. Users: Lapsus + +What: /sys/devices/platform/asus_laptop/wimax +Date: October 2010 +KernelVersion: 2.6.37 +Contact: "Corentin Chary" +Description: + Control the wimax device. 1 means on, 0 means off. + +What: /sys/devices/platform/asus_laptop/wwan +Date: October 2010 +KernelVersion: 2.6.37 +Contact: "Corentin Chary" +Description: + Control the wwan (3G) device. 1 means on, 0 means off. diff --git a/Documentation/ABI/testing/sysfs-platform-eeepc-wmi b/Documentation/ABI/testing/sysfs-platform-eeepc-wmi new file mode 100644 index 000000000000..e4b5fef5fadd --- /dev/null +++ b/Documentation/ABI/testing/sysfs-platform-eeepc-wmi @@ -0,0 +1,10 @@ +What: /sys/devices/platform/eeepc-wmi/cpufv +Date: Oct 2010 +KernelVersion: 2.6.37 +Contact: "Corentin Chary" +Description: + Change CPU clock configuration (write-only). + There are three available clock configuration: + * 0 -> Super Performance Mode + * 1 -> High Performance Mode + * 2 -> Power Saving Mode diff --git a/Documentation/DocBook/sh.tmpl b/Documentation/DocBook/sh.tmpl index d858d92cf6d9..4a38f604fa66 100644 --- a/Documentation/DocBook/sh.tmpl +++ b/Documentation/DocBook/sh.tmpl @@ -79,10 +79,6 @@ - - Clock Framework Extensions -!Iinclude/linux/sh_clk.h - Machine Specific Interfaces diff --git a/Documentation/driver-model/interface.txt b/Documentation/driver-model/interface.txt deleted file mode 100644 index c66912bfe866..000000000000 --- a/Documentation/driver-model/interface.txt +++ /dev/null @@ -1,129 +0,0 @@ - -Device Interfaces - -Introduction -~~~~~~~~~~~~ - -Device interfaces are the logical interfaces of device classes that correlate -directly to userspace interfaces, like device nodes. - -Each device class may have multiple interfaces through which you can -access the same device. An input device may support the mouse interface, -the 'evdev' interface, and the touchscreen interface. A SCSI disk would -support the disk interface, the SCSI generic interface, and possibly a raw -device interface. - -Device interfaces are registered with the class they belong to. As devices -are added to the class, they are added to each interface registered with -the class. The interface is responsible for determining whether the device -supports the interface or not. - - -Programming Interface -~~~~~~~~~~~~~~~~~~~~~ - -struct device_interface { - char * name; - rwlock_t lock; - u32 devnum; - struct device_class * devclass; - - struct list_head node; - struct driver_dir_entry dir; - - int (*add_device)(struct device *); - int (*add_device)(struct intf_data *); -}; - -int interface_register(struct device_interface *); -void interface_unregister(struct device_interface *); - - -An interface must specify the device class it belongs to. It is added -to that class's list of interfaces on registration. - - -Interfaces can be added to a device class at any time. Whenever it is -added, each device in the class is passed to the interface's -add_device callback. When an interface is removed, each device is -removed from the interface. - - -Devices -~~~~~~~ -Once a device is added to a device class, it is added to each -interface that is registered with the device class. The class -is expected to place a class-specific data structure in -struct device::class_data. The interface can use that (along with -other fields of struct device) to determine whether or not the driver -and/or device support that particular interface. - - -Data -~~~~ - -struct intf_data { - struct list_head node; - struct device_interface * intf; - struct device * dev; - u32 intf_num; -}; - -int interface_add_data(struct interface_data *); - -The interface is responsible for allocating and initializing a struct -intf_data and calling interface_add_data() to add it to the device's list -of interfaces it belongs to. This list will be iterated over when the device -is removed from the class (instead of all possible interfaces for a class). -This structure should probably be embedded in whatever per-device data -structure the interface is allocating anyway. - -Devices are enumerated within the interface. This happens in interface_add_data() -and the enumerated value is stored in the struct intf_data for that device. - -sysfs -~~~~~ -Each interface is given a directory in the directory of the device -class it belongs to: - -Interfaces get a directory in the class's directory as well: - - class/ - `-- input - |-- devices - |-- drivers - |-- mouse - `-- evdev - -When a device is added to the interface, a symlink is created that points -to the device's directory in the physical hierarchy: - - class/ - `-- input - |-- devices - | `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/ - |-- drivers - | `-- usb:usb_mouse -> ../../../bus/drivers/usb_mouse/ - |-- mouse - | `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/ - `-- evdev - `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/ - - -Future Plans -~~~~~~~~~~~~ -A device interface is correlated directly with a userspace interface -for a device, specifically a device node. For instance, a SCSI disk -exposes at least two interfaces to userspace: the standard SCSI disk -interface and the SCSI generic interface. It might also export a raw -device interface. - -Many interfaces have a major number associated with them and each -device gets a minor number. Or, multiple interfaces might share one -major number, and each will receive a range of minor numbers (like in -the case of input devices). - -These major and minor numbers could be stored in the interface -structure. Major and minor allocations could happen when the interface -is registered with the class, or via a helper function. - diff --git a/Documentation/edac.txt b/Documentation/edac.txt index 0b875e8da969..9ee774de57cd 100644 --- a/Documentation/edac.txt +++ b/Documentation/edac.txt @@ -196,7 +196,7 @@ csrow3. The representation of the above is reflected in the directory tree in EDAC's sysfs interface. Starting in directory /sys/devices/system/edac/mc each memory controller will be represented -by its own 'mcX' directory, where 'X" is the index of the MC. +by its own 'mcX' directory, where 'X' is the index of the MC. ..../edac/mc/ @@ -207,7 +207,7 @@ by its own 'mcX' directory, where 'X" is the index of the MC. .... Under each 'mcX' directory each 'csrowX' is again represented by a -'csrowX', where 'X" is the csrow index: +'csrowX', where 'X' is the csrow index: .../mc/mc0/ @@ -232,7 +232,7 @@ EDAC control and attribute files. In 'mcX' directories are EDAC control and attribute files for -this 'X" instance of the memory controllers: +this 'X' instance of the memory controllers: Counter reset control file: @@ -343,7 +343,7 @@ Sdram memory scrubbing rate: 'csrowX' DIRECTORIES In the 'csrowX' directories are EDAC control and attribute files for -this 'X" instance of csrow: +this 'X' instance of csrow: Total Uncorrectable Errors count attribute file: diff --git a/Documentation/fb/00-INDEX b/Documentation/fb/00-INDEX index a618fd99c9f0..30a70542e823 100644 --- a/Documentation/fb/00-INDEX +++ b/Documentation/fb/00-INDEX @@ -4,33 +4,41 @@ please mail me. Geert Uytterhoeven 00-INDEX - - this file + - this file. arkfb.txt - info on the fbdev driver for ARK Logic chips. aty128fb.txt - info on the ATI Rage128 frame buffer driver. cirrusfb.txt - info on the driver for Cirrus Logic chipsets. +cmap_xfbdev.txt + - an introduction to fbdev's cmap structures. deferred_io.txt - an introduction to deferred IO. +efifb.txt + - info on the EFI platform driver for Intel based Apple computers. +ep93xx-fb.txt + - info on the driver for EP93xx LCD controller. fbcon.txt - intro to and usage guide for the framebuffer console (fbcon). framebuffer.txt - introduction to frame buffer devices. -imacfb.txt - - info on the generic EFI platform driver for Intel based Macs. +gxfb.txt + - info on the framebuffer driver for AMD Geode GX2 based processors. intel810.txt - documentation for the Intel 810/815 framebuffer driver. intelfb.txt - docs for Intel 830M/845G/852GM/855GM/865G/915G/945G fb driver. internals.txt - quick overview of frame buffer device internals. +lxfb.txt + - info on the framebuffer driver for AMD Geode LX based processors. matroxfb.txt - info on the Matrox framebuffer driver for Alpha, Intel and PPC. +metronomefb.txt + - info on the driver for the Metronome display controller. modedb.txt - info on the video mode database. -matroxfb.txt - - info on the Matrox frame buffer driver. pvr2fb.txt - info on the PowerVR 2 frame buffer driver. pxafb.txt @@ -39,13 +47,23 @@ s3fb.txt - info on the fbdev driver for S3 Trio/Virge chips. sa1100fb.txt - information about the driver for the SA-1100 LCD controller. +sh7760fb.txt + - info on the SH7760/SH7763 integrated LCDC Framebuffer driver. sisfb.txt - info on the framebuffer device driver for various SiS chips. sstfb.txt - info on the frame buffer driver for 3dfx' Voodoo Graphics boards. tgafb.txt - - info on the TGA (DECChip 21030) frame buffer driver + - info on the TGA (DECChip 21030) frame buffer driver. +tridentfb.txt + info on the framebuffer driver for some Trident chip based cards. +uvesafb.txt + - info on the userspace VESA (VBE2+ compliant) frame buffer device. vesafb.txt - - info on the VESA frame buffer device + - info on the VESA frame buffer device. +viafb.modes + - list of modes for VIA Integration Graphic Chip. +viafb.txt + - info on the VIA Integration Graphic Chip console framebuffer driver. vt8623fb.txt - info on the fb driver for the graphics core in VIA VT8623 chipsets. diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index ed7e5efc06d8..55c28b79d8dc 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -660,11 +660,10 @@ struct address_space_operations { releasepage: releasepage is called on PagePrivate pages to indicate that the page should be freed if possible. ->releasepage should remove any private data from the page and clear the - PagePrivate flag. It may also remove the page from the - address_space. If this fails for some reason, it may indicate - failure with a 0 return value. - This is used in two distinct though related cases. The first - is when the VM finds a clean page with no active users and + PagePrivate flag. If releasepage() fails for some reason, it must + indicate failure with a 0 return value. + releasepage() is used in two distinct though related cases. The + first is when the VM finds a clean page with no active users and wants to make it a free page. If ->releasepage succeeds, the page will be removed from the address_space and become free. diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 86820a727b0b..b79a8fbf0dd7 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2387,6 +2387,11 @@ and is between 256 and 4096 characters. It is defined in the file improve throughput, but will also increase the amount of memory reserved for use by the client. + swapaccount[=0|1] + [KNL] Enable accounting of swap in memory resource + controller if no parameter or 1 is given or disable + it if 0 is given (See Documentation/cgroups/memory.txt) + swiotlb= [IA-64] Number of I/O TLB slabs switches= [HW,M68k] diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index fe95105992c5..3c5e465296e1 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -144,6 +144,7 @@ tcp_adv_win_scale - INTEGER Count buffering overhead as bytes/2^tcp_adv_win_scale (if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale), if it is <= 0. + Possible values are [-31, 31], inclusive. Default: 2 tcp_allowed_congestion_control - STRING diff --git a/Documentation/sh/clk.txt b/Documentation/sh/clk.txt deleted file mode 100644 index 114b595cfa97..000000000000 --- a/Documentation/sh/clk.txt +++ /dev/null @@ -1,32 +0,0 @@ -Clock framework on SuperH architecture - -The framework on SH extends existing API by the function clk_set_rate_ex, -which prototype is as follows: - - clk_set_rate_ex (struct clk *clk, unsigned long rate, int algo_id) - -The algo_id parameter is used to specify algorithm used to recalculate clocks, -adjanced to clock, specified as first argument. It is assumed that algo_id==0 -means no changes to adjanced clock - -Internally, the clk_set_rate_ex forwards request to clk->ops->set_rate method, -if it is present in ops structure. The method should set the clock rate and adjust -all needed clocks according to the passed algo_id. -Exact values for algo_id are machine-dependent. For the sh7722, the following -values are defined: - - NO_CHANGE = 0, - IUS_N1_N1, /* I:U = N:1, U:Sh = N:1 */ - IUS_322, /* I:U:Sh = 3:2:2 */ - IUS_522, /* I:U:Sh = 5:2:2 */ - IUS_N11, /* I:U:Sh = N:1:1 */ - SB_N1, /* Sh:B = N:1 */ - SB3_N1, /* Sh:B3 = N:1 */ - SB3_32, /* Sh:B3 = 3:2 */ - SB3_43, /* Sh:B3 = 4:3 */ - SB3_54, /* Sh:B3 = 5:4 */ - BP_N1, /* B:P = N:1 */ - IP_N1 /* I:P = N:1 */ - -Each of these constants means relation between clocks that can be set via the FRQCR -register diff --git a/MAINTAINERS b/MAINTAINERS index a92c994ba935..1a1c27b9c557 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1359,7 +1359,7 @@ F: include/net/bluetooth/ BONDING DRIVER M: Jay Vosburgh -L: bonding-devel@lists.sourceforge.net +L: netdev@vger.kernel.org W: http://sourceforge.net/projects/bonding/ S: Supported F: drivers/net/bonding/ @@ -2060,7 +2060,7 @@ F: Documentation/blockdev/drbd/ DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS M: Greg Kroah-Hartman -T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/ +T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git S: Supported F: Documentation/kobject.txt F: drivers/base/ @@ -2080,7 +2080,7 @@ F: include/drm/ INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets) M: Chris Wilson -L: intel-gfx@lists.freedesktop.org +L: intel-gfx@lists.freedesktop.org (subscribers-only) L: dri-devel@lists.freedesktop.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel.git S: Supported @@ -2444,10 +2444,12 @@ F: drivers/net/wan/sdla.c FRAMEBUFFER LAYER L: linux-fbdev@vger.kernel.org W: http://linux-fbdev.sourceforge.net/ +Q: http://patchwork.kernel.org/project/linux-fbdev/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6.git S: Orphan F: Documentation/fb/ -F: drivers/video/fb* +F: drivers/video/ +F: include/video/ F: include/linux/fb.h FREESCALE DMA DRIVER @@ -4062,9 +4064,8 @@ F: drivers/scsi/NCR_D700.* NETEFFECT IWARP RNIC DRIVER (IW_NES) M: Faisal Latif -M: Chien Tung L: linux-rdma@vger.kernel.org -W: http://www.neteffect.com +W: http://www.intel.com/Products/Server/Adapters/Server-Cluster/Server-Cluster-overview.htm S: Supported F: drivers/infiniband/hw/nes/ @@ -5837,6 +5838,8 @@ M: Chris Metcalf W: http://www.tilera.com/scm/ S: Supported F: arch/tile/ +F: drivers/char/hvc_tile.c +F: drivers/net/tile/ TLAN NETWORK DRIVER M: Samuel Chessman diff --git a/Makefile b/Makefile index b31d21377e4c..3d94974542ea 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 37 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc5 NAME = Flesh-Eating Bats with Fangs # *DOCUMENTATION* diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index db524e75c4a2..f1d9297b1050 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -9,7 +9,7 @@ config ARM select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI) select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_ARCH_KGDB - select HAVE_KPROBES if (!XIP_KERNEL) + select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL) select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 4a590f4113e2..4d26f2c52a75 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -70,12 +70,7 @@ else $(obj)/uImage: LOADADDR=$(ZRELADDR) endif -ifeq ($(CONFIG_THUMB2_KERNEL),y) -# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode -$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/") -else $(obj)/uImage: STARTADDR=$(LOADADDR) -endif $(obj)/uImage: $(obj)/zImage FORCE $(call if_changed,uimage) diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S index 8b0de41c3dcb..78b508075161 100644 --- a/arch/arm/boot/bootp/init.S +++ b/arch/arm/boot/bootp/init.S @@ -73,6 +73,8 @@ move: ldmia r4!, {r7 - r10} @ move 32-bytes at a time .size _start, . - _start + .align + .type data,#object data: .word initrd_start @ source initrd address .word initrd_phys @ destination initrd address diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 6825c34646d4..7193884ed8b0 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -125,9 +125,13 @@ wait: mrc p14, 0, pc, c0, c1, 0 * sort out different calling conventions */ .align + .arm @ Always enter in ARM state start: .type start,#function - .rept 8 + THUMB( adr r12, BSYM(1f) ) + THUMB( bx r12 ) + THUMB( .rept 6 ) + ARM( .rept 8 ) mov r0, r0 .endr @@ -135,6 +139,7 @@ start: .word 0x016f2818 @ Magic numbers to help the loader .word start @ absolute load/run zImage address .word _edata @ zImage end address + THUMB( .thumb ) 1: mov r7, r1 @ save architecture ID mov r8, r2 @ save atags pointer @@ -174,7 +179,8 @@ not_angel: ldr sp, [r0, #28] #ifdef CONFIG_AUTO_ZRELADDR @ determine final kernel image address - and r4, pc, #0xf8000000 + mov r4, pc + and r4, r4, #0xf8000000 add r4, r4, #TEXT_OFFSET #else ldr r4, =zreladdr @@ -445,7 +451,8 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size */ mov r1, #0x1e orr r1, r1, #3 << 10 - mov r2, pc, lsr #20 + mov r2, pc + mov r2, r2, lsr #20 orr r1, r1, r2, lsl #20 add r0, r3, r2, lsl #2 str r1, [r0], #4 @@ -1084,6 +1091,6 @@ memdump: mov r12, r0 reloc_end: .align - .section ".stack", "w" + .section ".stack", "aw", %nobits user_stack: .space 4096 user_stack_end: diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in index d08168941bd6..366a924019ac 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.in @@ -57,7 +57,7 @@ SECTIONS .bss : { *(.bss) } _end = .; - .stack (NOLOAD) : { *(.stack) } + .stack : { *(.stack) } .stab 0 : { *(.stab) } .stabstr 0 : { *(.stabstr) } diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 772f95f1aecd..e6388dcd8cfa 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -146,9 +146,15 @@ static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val) unsigned int shift = (irq % 4) * 8; unsigned int cpu = cpumask_first(mask_val); u32 val; + struct irq_desc *desc; spin_lock(&irq_controller_lock); - irq_desc[irq].node = cpu; + desc = irq_to_desc(irq); + if (desc == NULL) { + spin_unlock(&irq_controller_lock); + return -EINVAL; + } + desc->node = cpu; val = readl(reg) & ~(0xff << shift); val |= 1 << (cpu + shift); writel(val, reg); @@ -210,7 +216,7 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq) void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start) { - unsigned int max_irq, i; + unsigned int gic_irqs, irq_limit, i; u32 cpumask = 1 << smp_processor_id(); if (gic_nr >= MAX_GIC_NR) @@ -226,47 +232,49 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base, /* * Find out how many interrupts are supported. - */ - max_irq = readl(base + GIC_DIST_CTR) & 0x1f; - max_irq = (max_irq + 1) * 32; - - /* * The GIC only supports up to 1020 interrupt sources. - * Limit this to either the architected maximum, or the - * platform maximum. */ - if (max_irq > max(1020, NR_IRQS)) - max_irq = max(1020, NR_IRQS); + gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f; + gic_irqs = (gic_irqs + 1) * 32; + if (gic_irqs > 1020) + gic_irqs = 1020; /* * Set all global interrupts to be level triggered, active low. */ - for (i = 32; i < max_irq; i += 16) + for (i = 32; i < gic_irqs; i += 16) writel(0, base + GIC_DIST_CONFIG + i * 4 / 16); /* * Set all global interrupts to this CPU only. */ - for (i = 32; i < max_irq; i += 4) + for (i = 32; i < gic_irqs; i += 4) writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4); /* * Set priority on all global interrupts. */ - for (i = 32; i < max_irq; i += 4) + for (i = 32; i < gic_irqs; i += 4) writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4); /* * Disable all interrupts. Leave the PPI and SGIs alone * as these enables are banked registers. */ - for (i = 32; i < max_irq; i += 32) + for (i = 32; i < gic_irqs; i += 32) writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32); + /* + * Limit number of interrupts registered to the platform maximum + */ + irq_limit = gic_data[gic_nr].irq_offset + gic_irqs; + if (WARN_ON(irq_limit > NR_IRQS)) + irq_limit = NR_IRQS; + /* * Setup the Linux IRQ subsystem. */ - for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) { + for (i = irq_start; i < irq_limit; i++) { set_irq_chip(i, &gic_chip); set_irq_chip_data(i, &gic_data[gic_nr]); set_irq_handler(i, handle_level_irq); diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig new file mode 100644 index 000000000000..38cb7c985426 --- /dev/null +++ b/arch/arm/configs/at91rm9200_defconfig @@ -0,0 +1,341 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODVERSIONS=y +CONFIG_MODULE_SRCVERSION_ALL=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_AT91=y +CONFIG_MACH_ONEARM=y +CONFIG_ARCH_AT91RM9200DK=y +CONFIG_MACH_AT91RM9200EK=y +CONFIG_MACH_CSB337=y +CONFIG_MACH_CSB637=y +CONFIG_MACH_CARMEVA=y +CONFIG_MACH_ATEB9200=y +CONFIG_MACH_KB9200=y +CONFIG_MACH_PICOTUX2XX=y +CONFIG_MACH_KAFA=y +CONFIG_MACH_ECBAT91=y +CONFIG_MACH_YL9200=y +CONFIG_MACH_CPUAT91=y +CONFIG_MACH_ECO920=y +CONFIG_MTD_AT91_DATAFLASH_CARD=y +CONFIG_AT91_PROGRAMMABLE_CLOCKS=y +CONFIG_AT91_TIMER_HZ=100 +# CONFIG_ARM_THUMB is not set +CONFIG_PCCARD=y +CONFIG_AT91_CF=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_LEDS=y +CONFIG_LEDS_CPU=y +CONFIG_ZBOOT_ROM_TEXT=0x10000000 +CONFIG_ZBOOT_ROM_BSS=0x20040000 +CONFIG_KEXEC=y +CONFIG_FPE_NWFPE=y +CONFIG_BINFMT_MISC=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_XFRM_USER=m +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +CONFIG_INET_AH=m +CONFIG_INET_ESP=m +CONFIG_INET_IPCOMP=m +CONFIG_INET_XFRM_MODE_TRANSPORT=m +CONFIG_INET_XFRM_MODE_TUNNEL=m +CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_IPV6_PRIVACY=y +CONFIG_IPV6_ROUTER_PREF=y +CONFIG_IPV6_ROUTE_INFO=y +CONFIG_INET6_AH=m +CONFIG_INET6_ESP=m +CONFIG_INET6_IPCOMP=m +CONFIG_IPV6_MIP6=m +CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m +CONFIG_IPV6_TUNNEL=m +CONFIG_BRIDGE=m +CONFIG_VLAN_8021Q=m +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_AFS_PARTS=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_COMPLEX_MAPPINGS=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PLATRAM=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_PLATFORM=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_NBD=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_ATMEL_TCLIB=y +CONFIG_EEPROM_LEGACY=m +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_DEV_SR=m +CONFIG_BLK_DEV_SR_VENDOR=y +CONFIG_CHR_DEV_SG=m +CONFIG_SCSI_MULTI_LUN=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +CONFIG_TUN=m +CONFIG_PHYLIB=y +CONFIG_DAVICOM_PHY=y +CONFIG_SMSC_PHY=y +CONFIG_MICREL_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_ARM_AT91_ETHER=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_DM9601=m +CONFIG_USB_NET_GL620A=m +CONFIG_USB_NET_PLUSB=m +CONFIG_USB_NET_RNDIS_HOST=m +CONFIG_USB_ALI_M5632=y +CONFIG_USB_AN2720=y +CONFIG_USB_EPSON2888=y +CONFIG_PPP=y +CONFIG_PPP_MULTILINK=y +CONFIG_PPP_FILTER=y +CONFIG_PPP_ASYNC=y +CONFIG_PPP_DEFLATE=y +CONFIG_PPP_BSDCOMP=y +CONFIG_PPP_MPPE=m +CONFIG_PPPOE=m +CONFIG_SLIP=m +CONFIG_SLIP_COMPRESSED=y +CONFIG_SLIP_SMART=y +CONFIG_SLIP_MODE_SLIP6=y +# CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 +CONFIG_INPUT_EVDEV=y +CONFIG_KEYBOARD_GPIO=y +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_SERIAL_ATMEL=y +CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_LEGACY_PTY_COUNT=32 +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_GPIO=y +CONFIG_SPI=y +CONFIG_SPI_ATMEL=y +CONFIG_SPI_BITBANG=y +CONFIG_GPIO_SYSFS=y +CONFIG_HWMON=m +CONFIG_SENSORS_ADM1021=m +CONFIG_SENSORS_ADM1025=m +CONFIG_SENSORS_ADM1026=m +CONFIG_SENSORS_ADM1029=m +CONFIG_SENSORS_ADM1031=m +CONFIG_SENSORS_ADM9240=m +CONFIG_SENSORS_DS1621=m +CONFIG_SENSORS_GL518SM=m +CONFIG_SENSORS_GL520SM=m +CONFIG_SENSORS_IT87=m +CONFIG_SENSORS_LM63=m +CONFIG_SENSORS_LM73=m +CONFIG_SENSORS_LM75=m +CONFIG_SENSORS_LM77=m +CONFIG_SENSORS_LM78=m +CONFIG_SENSORS_LM80=m +CONFIG_SENSORS_LM83=m +CONFIG_SENSORS_LM85=m +CONFIG_SENSORS_LM87=m +CONFIG_SENSORS_LM90=m +CONFIG_SENSORS_LM92=m +CONFIG_SENSORS_MAX1619=m +CONFIG_SENSORS_PCF8591=m +CONFIG_SENSORS_SMSC47B397=m +CONFIG_SENSORS_W83781D=m +CONFIG_SENSORS_W83791D=m +CONFIG_SENSORS_W83792D=m +CONFIG_SENSORS_W83793=m +CONFIG_SENSORS_W83L785TS=m +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y +CONFIG_AT91RM9200_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_TILEBLITTING=y +CONFIG_FB_S1D13XXX=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_DISPLAY_SUPPORT=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_MINI_4x6=y +CONFIG_LOGO=y +# CONFIG_LOGO_LINUX_MONO is not set +# CONFIG_LOGO_LINUX_VGA16 is not set +CONFIG_USB=y +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_MON=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m +CONFIG_USB_STORAGE=y +CONFIG_USB_SERIAL=y +CONFIG_USB_SERIAL_CONSOLE=y +CONFIG_USB_SERIAL_GENERIC=y +CONFIG_USB_SERIAL_FTDI_SIO=y +CONFIG_USB_SERIAL_KEYSPAN=y +CONFIG_USB_SERIAL_KEYSPAN_MPR=y +CONFIG_USB_SERIAL_KEYSPAN_USA28=y +CONFIG_USB_SERIAL_KEYSPAN_USA28X=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y +CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y +CONFIG_USB_SERIAL_KEYSPAN_USA19=y +CONFIG_USB_SERIAL_KEYSPAN_USA18X=y +CONFIG_USB_SERIAL_KEYSPAN_USA19W=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y +CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y +CONFIG_USB_SERIAL_KEYSPAN_USA49W=y +CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y +CONFIG_USB_SERIAL_MCT_U232=y +CONFIG_USB_SERIAL_PL2303=y +CONFIG_USB_GADGET=y +CONFIG_USB_ETH=m +CONFIG_USB_MASS_STORAGE=m +CONFIG_MMC=y +CONFIG_MMC_AT91=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +CONFIG_RTC_CLASS=y +# CONFIG_RTC_HCTOSYS is not set +CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_PCF8563=y +CONFIG_RTC_DRV_AT91RM9200=y +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_REISERFS_FS=y +CONFIG_AUTOFS4_FS=y +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_ZISOFS=y +CONFIG_UDF_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=m +CONFIG_TMPFS=y +CONFIG_CONFIGFS_FS=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_SUMMARY=y +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_LZO=y +CONFIG_JFFS2_RUBIN=y +CONFIG_CRAMFS=y +CONFIG_MINIX_FS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y +CONFIG_NFSD=y +CONFIG_SMB_FS=m +CONFIG_CIFS=m +CONFIG_PARTITION_ADVANCED=y +CONFIG_MAC_PARTITION=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_737=m +CONFIG_NLS_CODEPAGE_775=m +CONFIG_NLS_CODEPAGE_850=m +CONFIG_NLS_CODEPAGE_852=m +CONFIG_NLS_CODEPAGE_855=m +CONFIG_NLS_CODEPAGE_857=m +CONFIG_NLS_CODEPAGE_860=m +CONFIG_NLS_CODEPAGE_861=m +CONFIG_NLS_CODEPAGE_862=m +CONFIG_NLS_CODEPAGE_863=m +CONFIG_NLS_CODEPAGE_864=m +CONFIG_NLS_CODEPAGE_865=m +CONFIG_NLS_CODEPAGE_866=m +CONFIG_NLS_CODEPAGE_869=m +CONFIG_NLS_CODEPAGE_936=m +CONFIG_NLS_CODEPAGE_950=m +CONFIG_NLS_CODEPAGE_932=m +CONFIG_NLS_CODEPAGE_949=m +CONFIG_NLS_CODEPAGE_874=m +CONFIG_NLS_ISO8859_8=m +CONFIG_NLS_CODEPAGE_1250=m +CONFIG_NLS_CODEPAGE_1251=m +CONFIG_NLS_ASCII=m +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=m +CONFIG_NLS_ISO8859_3=m +CONFIG_NLS_ISO8859_4=m +CONFIG_NLS_ISO8859_5=m +CONFIG_NLS_ISO8859_6=m +CONFIG_NLS_ISO8859_7=m +CONFIG_NLS_ISO8859_9=m +CONFIG_NLS_ISO8859_13=m +CONFIG_NLS_ISO8859_14=m +CONFIG_NLS_ISO8859_15=m +CONFIG_NLS_KOI8_R=m +CONFIG_NLS_KOI8_U=m +CONFIG_NLS_UTF8=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_KERNEL=y +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_FTRACE is not set +CONFIG_CRYPTO_PCBC=y +CONFIG_CRYPTO_SHA1=y diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig deleted file mode 100644 index 4438e64f3bfb..000000000000 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ /dev/null @@ -1,72 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200DK=y -CONFIG_MACH_ECO920=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig deleted file mode 100644 index ccd517c64bc7..000000000000 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ /dev/null @@ -1,73 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_AT91RM9200EK=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_S1D13XXX=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig deleted file mode 100644 index 1b0e9a1689bb..000000000000 --- a/arch/arm/configs/ateb9200_defconfig +++ /dev/null @@ -1,131 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y -CONFIG_SLAB=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_ARCH_AT91=y -CONFIG_MACH_ATEB9200=y -CONFIG_PCCARD=m -CONFIG_AT91_CF=m -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -# CONFIG_IPV6 is not set -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK_RO=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_TUN=m -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -CONFIG_USB_USBNET=y -CONFIG_USB_NET_GL620A=y -CONFIG_USB_NET_PLUSB=y -CONFIG_USB_NET_RNDIS_HOST=y -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_PPP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPPOE=m -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_GPIO=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=y -CONFIG_USB_HID=m -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=m -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_GADGET=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=m -CONFIG_MMC_DEBUG=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=m -CONFIG_REISERFS_FS=m -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_NTFS_FS=m -CONFIG_NTFS_RW=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFSD=m -CONFIG_NFSD_V4=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_UTF8=m -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_ARC4=m -CONFIG_CRC16=m -CONFIG_LIBCRC32C=m diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig deleted file mode 100644 index ac64dbd8a49c..000000000000 --- a/arch/arm/configs/carmeva_defconfig +++ /dev/null @@ -1,47 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -# CONFIG_HOTPLUG is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_ARCH_AT91=y -CONFIG_MACH_CARMEVA=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_BLK_DEV_RAM=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_SERIO=m -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_MMC=m -CONFIG_MMC_DEBUG=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -# CONFIG_DNOTIFY is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=y diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig deleted file mode 100644 index 022aeb55b676..000000000000 --- a/arch/arm/configs/cpuat91_defconfig +++ /dev/null @@ -1,112 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_CPUAT91=y -CONFIG_AT91_TIMER_HZ=100 -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PLATRAM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_PPP=y -CONFIG_PPP_ASYNC=y -CONFIG_PPP_DEFLATE=y -CONFIG_PPP_BSDCOMP=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_GPIO=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_PCF8563=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_AUTOFS4_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_CRAMFS=y -CONFIG_MINIX_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig deleted file mode 100644 index a24c448840c4..000000000000 --- a/arch/arm/configs/csb337_defconfig +++ /dev/null @@ -1,104 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_CSB337=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_CONSOLE=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_MCT_U232=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_HCTOSYS_DEVICE="rtc1" -# CONFIG_RTC_INTF_SYSFS is not set -CONFIG_RTC_DRV_DS1307=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig deleted file mode 100644 index 98552adac5fb..000000000000 --- a/arch/arm/configs/csb637_defconfig +++ /dev/null @@ -1,98 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_CSB637=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_LRO is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_SCSI=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_SERIAL=y -CONFIG_USB_SERIAL_CONSOLE=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_FTDI_SIO=y -CONFIG_USB_SERIAL_KEYSPAN=y -CONFIG_USB_SERIAL_KEYSPAN_MPR=y -CONFIG_USB_SERIAL_KEYSPAN_USA28=y -CONFIG_USB_SERIAL_KEYSPAN_USA28X=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y -CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y -CONFIG_USB_SERIAL_KEYSPAN_USA19=y -CONFIG_USB_SERIAL_KEYSPAN_USA18X=y -CONFIG_USB_SERIAL_KEYSPAN_USA19W=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y -CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y -CONFIG_USB_SERIAL_KEYSPAN_USA49W=y -CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y -CONFIG_USB_SERIAL_MCT_U232=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig deleted file mode 100644 index 6bb6abdcea8c..000000000000 --- a/arch/arm/configs/ecbat91_defconfig +++ /dev/null @@ -1,99 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_ECBAT91=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_PREEMPT=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IPV6 is not set -CONFIG_CFG80211=y -CONFIG_MAC80211=y -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_AFS_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_PPP=y -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_PRINTER=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_REISERFS_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_DEBUG_USER=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_SHA1=y diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig deleted file mode 100644 index 896dbe00dc6e..000000000000 --- a/arch/arm/configs/kafa_defconfig +++ /dev/null @@ -1,61 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_KAFA=y -# CONFIG_ARM_THUMB is not set -CONFIG_PREEMPT=y -CONFIG_LEDS=y -CONFIG_LEDS_CPU=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK_RO=y -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=32 -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_GPIO=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_DES=y diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig deleted file mode 100644 index 9f906a85f5c2..000000000000 --- a/arch/arm/configs/kb9202_defconfig +++ /dev/null @@ -1,127 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_AUDIT=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_EXTRA_PASS=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_KB9200=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x10000000 -CONFIG_ZBOOT_ROM_BSS=0x20040000 -CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M" -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_GLUEBI=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_ATMEL_TCLIB=y -CONFIG_ATMEL_SSC=y -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SPI_ATTRS=m -# CONFIG_SCSI_LOWLEVEL is not set -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_AT91RM9200_WATCHDOG=y -CONFIG_FB=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_GENERIC is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FONTS=y -CONFIG_FONT_MINI_4x6=y -# CONFIG_HID_SUPPORT is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_LIBUSUAL=y -CONFIG_MMC=y -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_UTF8=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig deleted file mode 100644 index 1579857aeeaa..000000000000 --- a/arch/arm/configs/onearm_defconfig +++ /dev/null @@ -1,80 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EMBEDDED=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_ONEARM=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -# CONFIG_ARM_THUMB is not set -CONFIG_PCCARD=y -CONFIG_AT91_CF=y -CONFIG_LEDS=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IPV6=y -# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET6_XFRM_MODE_TUNNEL is not set -# CONFIG_INET6_XFRM_MODE_BEET is not set -# CONFIG_IPV6_SIT is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=y -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_GADGET=y -CONFIG_MMC=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_ROOT_NFS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig deleted file mode 100644 index 4c9afa478d57..000000000000 --- a/arch/arm/configs/picotux200_defconfig +++ /dev/null @@ -1,242 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_IKCONFIG=m -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EMBEDDED=y -# CONFIG_KALLSYMS is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_MACH_PICOTUX2XX=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_MISC=m -CONFIG_NET=y -CONFIG_PACKET=m -CONFIG_UNIX=y -CONFIG_XFRM_USER=m -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE=m -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_DIAG=m -CONFIG_IPV6_PRIVACY=y -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_TUNNEL=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m -CONFIG_FW_LOADER=m -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_PHYSMAP=y -CONFIG_BLK_DEV_LOOP=m -CONFIG_EEPROM_LEGACY=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m -CONFIG_BLK_DEV_SR=m -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_NETDEVICES=y -CONFIG_TUN=m -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -CONFIG_PPP=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_VT is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_GPIO=m -CONFIG_HWMON=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1029=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_PCF8591=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83L785TS=m -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_NOWAYOUT=y -CONFIG_AT91RM9200_WATCHDOG=m -CONFIG_HID=m -CONFIG_USB=m -CONFIG_USB_DEVICEFS=y -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_PL2303=m -CONFIG_MMC=m -CONFIG_MMC_AT91=m -CONFIG_RTC_CLASS=m -CONFIG_RTC_DRV_AT91RM9200=m -CONFIG_EXT2_FS=m -CONFIG_EXT3_FS=m -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_NTFS_FS=m -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_NFS_FS=m -CONFIG_SMB_FS=m -CONFIG_CIFS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_AMIGA_PARTITION=y -CONFIG_NLS_DEFAULT="utf-8" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_UTF8=m -CONFIG_DEBUG_KERNEL=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_LRW=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAMELLIA=m -CONFIG_CRYPTO_CAST5=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_FCRYPT=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_LIBCRC32C=m diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig deleted file mode 100644 index 30c537f61089..000000000000 --- a/arch/arm/configs/yl9200_defconfig +++ /dev/null @@ -1,137 +0,0 @@ -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91RM9200DK=y -CONFIG_MACH_YL9200=y -# CONFIG_ARM_THUMB is not set -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PLATRAM=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=3 -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_BLK_DEV_SD=y -CONFIG_ATA=y -CONFIG_NETDEVICES=y -CONFIG_PHYLIB=y -CONFIG_DAVICOM_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_ARM_AT91_ETHER=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_MOUSEDEV_SCREEN_X=640 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480 -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO_SERPORT is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_SPI=y -CONFIG_SPI_DEBUG=y -CONFIG_SPI_ATMEL=y -CONFIG_FB=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_USB=y -CONFIG_USB_DEBUG=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_M66592=y -CONFIG_USB_FILE_STORAGE=m -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -# CONFIG_MMC_BLOCK_BOUNCE is not set -CONFIG_MMC_AT91=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_AT91RM9200=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT3_FS=y -CONFIG_REISERFS_FS=y -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=y -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=1 -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_RUBIN=y -CONFIG_CRAMFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_DEBUG_FS=y -CONFIG_DEBUG_KERNEL=y -CONFIG_SLUB_DEBUG_ON=y -CONFIG_DEBUG_KOBJECT=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LIST=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 062b58c029ab..749bb6622404 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -238,7 +238,7 @@ @ Slightly optimised to avoid incrementing the pointer twice usraccoff \instr, \reg, \ptr, \inc, 0, \cond, \abort .if \rept == 2 - usraccoff \instr, \reg, \ptr, \inc, 4, \cond, \abort + usraccoff \instr, \reg, \ptr, \inc, \inc, \cond, \abort .endif add\cond \ptr, #\rept * \inc diff --git a/arch/arm/include/asm/mmu.h b/arch/arm/include/asm/mmu.h index 68870c776671..b4ffe9d5b526 100644 --- a/arch/arm/include/asm/mmu.h +++ b/arch/arm/include/asm/mmu.h @@ -13,6 +13,10 @@ typedef struct { #ifdef CONFIG_CPU_HAS_ASID #define ASID(mm) ((mm)->context.id & 255) + +/* init_mm.context.id_lock should be initialized. */ +#define INIT_MM_CONTEXT(name) \ + .context.id_lock = __SPIN_LOCK_UNLOCKED(name.context.id_lock), #else #define ASID(mm) (0) #endif diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index b155414192da..53d1d5deb111 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -374,6 +374,9 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pmd_page(pmd) pfn_to_page(__phys_to_pfn(pmd_val(pmd))) +/* we don't need complex calculations here as the pmd is folded into the pgd */ +#define pmd_addr_end(addr,end) (end) + /* * Conversion functions: convert a page and protection to a page entry, * and a page entry and page directory to the page they refer to. diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index c09e3573c5de..bb96a7d4bbf5 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -911,7 +911,7 @@ __kuser_cmpxchg: @ 0xffff0fc0 * A special ghost syscall is used for that (see traps.c). */ stmfd sp!, {r7, lr} - ldr r7, =1f @ it's 20 bits + ldr r7, 1f @ it's 20 bits swi __ARM_NR_cmpxchg ldmfd sp!, {r7, pc} 1: .word __ARM_NR_cmpxchg diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index dd6b369ac69c..6bd82d25683c 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -85,9 +85,11 @@ ENTRY(stext) mrc p15, 0, r9, c0, c0 @ get processor id bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)? + THUMB( it eq ) @ force fixup-able long branch encoding beq __error_p @ yes, error 'p' bl __lookup_machine_type @ r5=machinfo movs r8, r5 @ invalid machine (r5=0)? + THUMB( it eq ) @ force fixup-able long branch encoding beq __error_a @ yes, error 'a' bl __vet_atags #ifdef CONFIG_SMP_ON_UP @@ -262,6 +264,7 @@ __create_page_tables: mov pc, lr ENDPROC(__create_page_tables) .ltorg + .align __enable_mmu_loc: .long . .long __enable_mmu @@ -282,6 +285,7 @@ ENTRY(secondary_startup) bl __lookup_processor_type movs r10, r5 @ invalid processor? moveq r0, #'p' @ yes, error 'p' + THUMB( it eq ) @ force fixup-able long branch encoding beq __error_p /* @@ -308,6 +312,8 @@ ENTRY(__secondary_switched) b secondary_start_kernel ENDPROC(__secondary_switched) + .align + .type __secondary_data, %object __secondary_data: .long . @@ -413,6 +419,7 @@ __fixup_smp_on_up: mov pc, lr ENDPROC(__fixup_smp) + .align 1: .word . .word __smpalt_begin .word __smpalt_end diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index fd26f8d65151..9cf4cbf8f95b 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -59,6 +59,8 @@ relocate_new_kernel: ldr r2,kexec_boot_atags mov pc,lr + .align + .globl kexec_start_address kexec_start_address: .long 0x0 diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S index 1e4cbd4e7be9..64f6bc1a9132 100644 --- a/arch/arm/lib/findbit.S +++ b/arch/arm/lib/findbit.S @@ -174,8 +174,8 @@ ENDPROC(_find_next_bit_be) */ .L_found: #if __LINUX_ARM_ARCH__ >= 5 - rsb r1, r3, #0 - and r3, r3, r1 + rsb r0, r3, #0 + and r3, r3, r0 clz r3, r3 rsb r3, r3, #31 add r0, r2, r3 @@ -190,5 +190,7 @@ ENDPROC(_find_next_bit_be) addeq r2, r2, #1 mov r0, r2 #endif + cmp r1, r0 @ Clamp to maxbit + movlo r0, r1 mov pc, lr diff --git a/arch/arm/mach-aaec2000/include/mach/vmalloc.h b/arch/arm/mach-aaec2000/include/mach/vmalloc.h index cff4e0a996ce..a6299e8321bd 100644 --- a/arch/arm/mach-aaec2000/include/mach/vmalloc.h +++ b/arch/arm/mach-aaec2000/include/mach/vmalloc.h @@ -11,6 +11,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END 0xd0000000 +#define VMALLOC_END 0xd0000000UL #endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 821eb842795f..62d686f0b426 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -24,8 +24,8 @@ obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support obj-$(CONFIG_MACH_ONEARM) += board-1arm.o -obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o -obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o +obj-$(CONFIG_ARCH_AT91RM9200DK) += board-rm9200dk.o +obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o obj-$(CONFIG_MACH_CSB337) += board-csb337.o obj-$(CONFIG_MACH_CSB637) += board-csb637.o obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 9338825cfcd7..7b539228e0ef 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -1106,51 +1106,6 @@ static inline void configure_usart3_pins(unsigned pins) static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ struct platform_device *atmel_default_console_device; /* the serial console device */ -void __init __deprecated at91_init_serial(struct at91_uart_config *config) -{ - int i; - - /* Fill in list of supported UARTs */ - for (i = 0; i < config->nr_tty; i++) { - switch (config->tty_map[i]) { - case 0: - configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS); - at91_uarts[i] = &at91rm9200_uart0_device; - at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart"); - break; - case 1: - configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI); - at91_uarts[i] = &at91rm9200_uart1_device; - at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart"); - break; - case 2: - configure_usart2_pins(0); - at91_uarts[i] = &at91rm9200_uart2_device; - at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart"); - break; - case 3: - configure_usart3_pins(0); - at91_uarts[i] = &at91rm9200_uart3_device; - at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart"); - break; - case 4: - configure_dbgu_pins(); - at91_uarts[i] = &at91rm9200_dbgu_device; - at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart"); - break; - default: - continue; - } - at91_uarts[i]->id = i; /* update ID number to mapped ID */ - } - - /* Set serial console device */ - if (config->console_tty < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[config->console_tty]; - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 46bdc82d3fbf..8a3fc84847c1 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -39,24 +39,24 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata onearm_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 3, - .tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */ -}; - static void __init onearm_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_PQFP); - /* Setup the serial ports and console */ - at91_init_serial(&onearm_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init onearm_init_irq(void) diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index c0ce79d431a0..d2e1f4ec1fcc 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -39,17 +39,6 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata kafa_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init kafa_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ @@ -58,8 +47,14 @@ static void __init kafa_map_io(void) /* Set up the LEDs */ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); - /* Setup the serial ports and console */ - at91_init_serial(&kafa_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */ + at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init kafa_init_irq(void) diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 9d833bbc592d..55dad3a46547 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -43,24 +43,21 @@ #include "generic.h" -/* - * Serial port configuration. - * 0 .. 3 = USART0 .. USART3 - * 4 = DBGU - */ -static struct at91_uart_config __initdata picotux200_uart_config = { - .console_tty = 0, /* ttyS0 */ - .nr_tty = 2, - .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */ -}; - static void __init picotux200_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ at91rm9200_initialize(18432000, AT91RM9200_BGA); - /* Setup the serial ports and console */ - at91_init_serial(&picotux200_uart_config); + /* DBGU on ttyS0. (Rx & Tx only) */ + at91_register_uart(0, 0, 0); + + /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ + at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS + | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD + | ATMEL_UART_RI); + + /* set serial console to ttyS0 (ie, DBGU) */ + at91_set_serial_console(0); } static void __init picotux200_init_irq(void) @@ -77,11 +74,6 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = { .ports = 1, }; -// static struct at91_udc_data __initdata picotux200_udc_data = { -// .vbus_pin = AT91_PIN_PD4, -// .pullup_pin = AT91_PIN_PD5, -// }; - static struct at91_mmc_data __initdata picotux200_mmc_data = { .det_pin = AT91_PIN_PB27, .slot_b = 0, @@ -89,21 +81,6 @@ static struct at91_mmc_data __initdata picotux200_mmc_data = { .wp_pin = AT91_PIN_PA17, }; -// static struct spi_board_info picotux200_spi_devices[] = { -// { /* DataFlash chip */ -// .modalias = "mtd_dataflash", -// .chip_select = 0, -// .max_speed_hz = 15 * 1000 * 1000, -// }, -// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD -// { /* DataFlash card */ -// .modalias = "mtd_dataflash", -// .chip_select = 3, -// .max_speed_hz = 15 * 1000 * 1000, -// }, -// #endif -// }; - #define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0 #define PICOTUX200_FLASH_SIZE SZ_4M @@ -135,21 +112,11 @@ static void __init picotux200_board_init(void) at91_add_device_eth(&picotux200_eth_data); /* USB Host */ at91_add_device_usbh(&picotux200_usbh_data); - /* USB Device */ - // at91_add_device_udc(&picotux200_udc_data); - // at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */ /* I2C */ at91_add_device_i2c(NULL, 0); - /* SPI */ - // at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices)); -#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD - /* DataFlash card */ - at91_set_gpio_output(AT91_PIN_PB22, 0); -#else /* MMC */ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ at91_add_device_mmc(0, &picotux200_mmc_data); -#endif /* NOR Flash */ platform_device_register(&picotux200_flash); } diff --git a/arch/arm/mach-at91/board-dk.c b/arch/arm/mach-at91/board-rm9200dk.c similarity index 98% rename from arch/arm/mach-at91/board-dk.c rename to arch/arm/mach-at91/board-rm9200dk.c index e14f0e165680..4c1047c8200d 100644 --- a/arch/arm/mach-at91/board-dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91/board-dk.c + * linux/arch/arm/mach-at91/board-rm9200dk.c * * Copyright (C) 2005 SAN People * @@ -91,10 +91,12 @@ static struct at91_cf_data __initdata dk_cf_data = { // .vcc_pin = ... always powered }; +#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD static struct at91_mmc_data __initdata dk_mmc_data = { .slot_b = 0, .wire4 = 1, }; +#endif static struct spi_board_info dk_spi_devices[] = { { /* DataFlash chip */ diff --git a/arch/arm/mach-at91/board-ek.c b/arch/arm/mach-at91/board-rm9200ek.c similarity index 98% rename from arch/arm/mach-at91/board-ek.c rename to arch/arm/mach-at91/board-rm9200ek.c index 56e92c4bbc2a..9df1be8818c0 100644 --- a/arch/arm/mach-at91/board-ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/mach-at91/board-ek.c + * linux/arch/arm/mach-at91/board-rm9200ek.c * * Copyright (C) 2005 SAN People * @@ -84,12 +84,14 @@ static struct at91_udc_data __initdata ek_udc_data = { .pullup_pin = AT91_PIN_PD5, }; +#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD static struct at91_mmc_data __initdata ek_mmc_data = { .det_pin = AT91_PIN_PB27, .slot_b = 0, .wire4 = 1, .wp_pin = AT91_PIN_PA17, }; +#endif static struct spi_board_info ek_spi_devices[] = { { /* DataFlash chip */ diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 89df00a9d2f7..e0f0080eb639 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -387,7 +387,7 @@ static struct spi_board_info yl9200_spi_devices[] = { * EPSON S1D13806 FB (discontinued chip) * EPSON S1D13506 FB */ -#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE) +#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE) #include