From 121fe86bdf062af3fed1e998c08c3c272ae6dc99 Mon Sep 17 00:00:00 2001 From: Robin Getz Date: Fri, 17 Oct 2008 01:36:43 +0800 Subject: [PATCH 1/2] [CPUFREQ] Documentation: Add Blackfin to list of supported processors Signed-off-by: Robin Getz Signed-off-by: Bryan Wu Signed-off-by: Dave Jones --- Documentation/cpu-freq/user-guide.txt | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt index 6c442d8426b5..4f3f3840320e 100644 --- a/Documentation/cpu-freq/user-guide.txt +++ b/Documentation/cpu-freq/user-guide.txt @@ -23,6 +23,7 @@ Contents: 1.3 sparc64 1.4 ppc 1.5 SuperH +1.6 Blackfin 2. "Policy" / "Governor"? 2.1 Policy @@ -97,6 +98,17 @@ The following SuperH processors are supported by cpufreq: SH-3 SH-4 +1.6 Blackfin +------------ + +The following Blackfin processors are supported by cpufreq: + +BF522, BF523, BF524, BF525, BF526, BF527, Rev 0.1 or higher +BF531, BF532, BF533, Rev 0.3 or higher +BF534, BF536, BF537, Rev 0.2 or higher +BF561, Rev 0.3 or higher +BF542, BF544, BF547, BF548, BF549, Rev 0.1 or higher + 2. "Policy" / "Governor" ? ========================== From a266d9f1253a38ec2d5655ebcd6846298b0554f4 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Fri, 21 Nov 2008 14:49:25 +0100 Subject: [PATCH 2/2] [CPUFREQ] powernow-k8: ignore out-of-range PstateStatus value A workaround for AMD CPU family 11h erratum 311 might cause that the P-state Status Register shows a "current P-state" which is larger than the "current P-state limit" in P-state Current Limit Register. For the wrong P-state value there is no ACPI _PSS object defined and powernow-k8/cpufreq can't determine the proper CPU frequency for that state. As a consequence this can cause a panic during boot (potentially with all recent kernel versions -- at least I have reproduced it with various 2.6.27 kernels and with the current .28 series), as an example: powernow-k8: Found 1 AMD Turion(tm)X2 Ultra DualCore Mobile ZM-82 processors (2 \ ) powernow-k8: 0 : pstate 0 (2200 MHz) powernow-k8: 1 : pstate 1 (1100 MHz) powernow-k8: 2 : pstate 2 (600 MHz) BUG: unable to handle kernel paging request at ffff88086e7528b8 IP: [] cpufreq_stats_update+0x4a/0x5f PGD 202063 PUD 0 Oops: 0002 [#1] SMP last sysfs file: CPU 1 Modules linked in: Pid: 1, comm: swapper Not tainted 2.6.28-rc3-dirty #16 RIP: 0010:[] [] cpufreq_stats_update+0x4a/0\ f Synaptics claims to have extended capabilities, but I'm not able to read them.<6\ 6 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88006e7528c0 RDX: 00000000ffffffff RSI: ffff88006e54af00 RDI: ffffffff808f056c RBP: 00000000fffee697 R08: 0000000000000003 R09: ffff88006e73f080 R10: 0000000000000001 R11: 00000000002191c0 R12: ffff88006fb83c10 R13: 00000000ffffffff R14: 0000000000000001 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88006fb50740(0000) knlGS:0000000000000000 Unable to initialize Synaptics hardware. CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: ffff88086e7528b8 CR3: 0000000000201000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff88006fb82000, task ffff88006fb816d0) Stack: ffff88006e74da50 0000000000000000 ffff88006e54af00 ffffffff804863c7 ffff88006e74da50 0000000000000000 00000000ffffffff 0000000000000000 ffff88006fb83c10 ffffffff8024b46c ffffffff808f0560 ffff88006fb83c10 Call Trace: [] ? cpufreq_stat_notifier_trans+0x51/0x83 [] ? notifier_call_chain+0x29/0x4c [] ? __srcu_notifier_call_chain+0x46/0x61 [] ? cpufreq_notify_transition+0x93/0xa9 [] ? powernowk8_target+0x1e8/0x5f3 [] ? cpufreq_governor_performance+0x1b/0x20 [] ? __cpufreq_governor+0x71/0xa8 [] ? __cpufreq_set_policy+0x101/0x13e [] ? cpufreq_add_dev+0x3f0/0x4cd [] ? handle_update+0x0/0x8 [] ? sysdev_driver_register+0xb6/0x10d [] ? powernowk8_init+0x0/0x7e [] ? cpufreq_register_driver+0x8f/0x140 [] ? _stext+0x56/0x14f [] ? proc_register+0x122/0x17d [] ? create_proc_entry+0x73/0x8a [] ? register_irq_proc+0x92/0xaa [] ? init_irq_proc+0x57/0x69 [] ? kernel_init+0x116/0x169 [] ? child_rip+0xa/0x11 [] ? kernel_init+0x0/0x169 [] ? child_rip+0x0/0x11 Code: 05 c5 83 36 00 48 c7 c2 48 5d 86 80 48 8b 04 d8 48 8b 40 08 48 8b 34 02 48\ RIP [] cpufreq_stats_update+0x4a/0x5f RSP CR2: ffff88086e7528b8 ---[ end trace 0678bac75e67a2f7 ]--- Kernel panic - not syncing: Attempted to kill init! In short, aftereffect of the wrong P-state is that cpufreq_stats_update() uses "-1" as index for some array in cpufreq_stats_update (unsigned int cpu) { ... if (stat->time_in_state) stat->time_in_state[stat->last_index] = cputime64_add(stat->time_in_state[stat->last_index], cputime_sub(cur_time, stat->last_time)); ... } Fortunately, the wrong P-state value is returned only if the core is in P-state 0. This fix solves the problem by detecting the out-of-range P-state, ignoring it, and using "0" instead. Cc: Mark Langsdorf Signed-off-by: Andreas Herrmann Signed-off-by: Dave Jones --- arch/x86/kernel/cpu/cpufreq/powernow-k8.c | 18 +++++++++++++++--- arch/x86/kernel/cpu/cpufreq/powernow-k8.h | 17 ++++++++++++++++- 2 files changed, 31 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index d3dcd58b87cd..7f05f44b97e9 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -115,9 +115,20 @@ static int query_current_values_with_pending_wait(struct powernow_k8_data *data) u32 i = 0; if (cpu_family == CPU_HW_PSTATE) { - rdmsr(MSR_PSTATE_STATUS, lo, hi); - i = lo & HW_PSTATE_MASK; - data->currpstate = i; + if (data->currpstate == HW_PSTATE_INVALID) { + /* read (initial) hw pstate if not yet set */ + rdmsr(MSR_PSTATE_STATUS, lo, hi); + i = lo & HW_PSTATE_MASK; + + /* + * a workaround for family 11h erratum 311 might cause + * an "out-of-range Pstate if the core is in Pstate-0 + */ + if (i >= data->numps) + data->currpstate = HW_PSTATE_0; + else + data->currpstate = i; + } return 0; } do { @@ -1121,6 +1132,7 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) } data->cpu = pol->cpu; + data->currpstate = HW_PSTATE_INVALID; if (powernow_k8_cpu_init_acpi(data)) { /* diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h index ab48cfed4d96..65cfb5d7f77f 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.h +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.h @@ -5,6 +5,19 @@ * http://www.gnu.org/licenses/gpl.html */ + +enum pstate { + HW_PSTATE_INVALID = 0xff, + HW_PSTATE_0 = 0, + HW_PSTATE_1 = 1, + HW_PSTATE_2 = 2, + HW_PSTATE_3 = 3, + HW_PSTATE_4 = 4, + HW_PSTATE_5 = 5, + HW_PSTATE_6 = 6, + HW_PSTATE_7 = 7, +}; + struct powernow_k8_data { unsigned int cpu; @@ -23,7 +36,9 @@ struct powernow_k8_data { u32 exttype; /* extended interface = 1 */ /* keep track of the current fid / vid or pstate */ - u32 currvid, currfid, currpstate; + u32 currvid; + u32 currfid; + enum pstate currpstate; /* the powernow_table includes all frequency and vid/fid pairings: * fid are the lower 8 bits of the index, vid are the upper 8 bits.