Merge remote-tracking branches 'spi/topic/coldfire' and 'spi/topic/dw' into spi-next

drivers/spi/spi-coldfire-qspi.c

@@ -420,19 +420,20 @@ static int mcfqspi_probe(struct platform_device *pdev)
 	master->auto_runtime_pm = true;
 
 	platform_set_drvdata(pdev, master);
+	pm_runtime_enable(&pdev->dev);
 
 	status = devm_spi_register_master(&pdev->dev, master);
 	if (status) {
 		dev_dbg(&pdev->dev, "spi_register_master failed\n");
 		goto fail2;
 	}
-	pm_runtime_enable(&pdev->dev);
 
 	dev_info(&pdev->dev, "Coldfire QSPI bus driver\n");
 
 	return 0;
 
 fail2:
+	pm_runtime_disable(&pdev->dev);
 	mcfqspi_cs_teardown(mcfqspi);
 fail1:
 	clk_disable(mcfqspi->clk);

drivers/spi/spi-dw-mmio.c

@@ -19,6 +19,7 @@
 #include <linux/of.h>
 #include <linux/of_gpio.h>
 #include <linux/of_platform.h>
+#include <linux/property.h>
 
 #include "spi-dw.h"
 
@@ -74,13 +75,11 @@ static int dw_spi_mmio_probe(struct platform_device *pdev)
 
 	dws->max_freq = clk_get_rate(dwsmmio->clk);
 
-	of_property_read_u32(pdev->dev.of_node, "reg-io-width",
+	device_property_read_u32(&pdev->dev, "reg-io-width", &dws->reg_io_width);
-			     &dws->reg_io_width);
 
 	num_cs = 4;
 
-	if (pdev->dev.of_node)
+	device_property_read_u32(&pdev->dev, "num-cs", &num_cs);
-		of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs);
 
 	dws->num_cs = num_cs;
 

drivers/spi/spi-dw-pci.c

@@ -23,11 +23,6 @@
 
 #define DRIVER_NAME "dw_spi_pci"
 
-struct dw_spi_pci {
-	struct pci_dev	*pdev;
-	struct dw_spi	dws;
-};
-
 struct spi_pci_desc {
 	int	(*setup)(struct dw_spi *);
 	u16	num_cs;
@@ -48,7 +43,6 @@ static struct spi_pci_desc spi_pci_mid_desc_2 = {
 
 static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
-	struct dw_spi_pci *dwpci;
 	struct dw_spi *dws;
 	struct spi_pci_desc *desc = (struct spi_pci_desc *)ent->driver_data;
 	int pci_bar = 0;
@@ -58,14 +52,10 @@ static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (ret)
 		return ret;
 
-	dwpci = devm_kzalloc(&pdev->dev, sizeof(struct dw_spi_pci),
+	dws = devm_kzalloc(&pdev->dev, sizeof(*dws), GFP_KERNEL);
-			GFP_KERNEL);
+	if (!dws)
-	if (!dwpci)
 		return -ENOMEM;
 
-	dwpci->pdev = pdev;
-	dws = &dwpci->dws;
-
 	/* Get basic io resource and map it */
 	dws->paddr = pci_resource_start(pdev, pci_bar);
 
@@ -74,7 +64,6 @@ static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return ret;
 
 	dws->regs = pcim_iomap_table(pdev)[pci_bar];
-
 	dws->irq = pdev->irq;
 
 	/*
@@ -99,7 +88,7 @@ static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		return ret;
 
 	/* PCI hook and SPI hook use the same drv data */
-	pci_set_drvdata(pdev, dwpci);
+	pci_set_drvdata(pdev, dws);
 
 	dev_info(&pdev->dev, "found PCI SPI controller(ID: %04x:%04x)\n",
 		pdev->vendor, pdev->device);
@@ -109,26 +98,26 @@ static int spi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 static void spi_pci_remove(struct pci_dev *pdev)
 {
-	struct dw_spi_pci *dwpci = pci_get_drvdata(pdev);
+	struct dw_spi *dws = pci_get_drvdata(pdev);
 
-	dw_spi_remove_host(&dwpci->dws);
+	dw_spi_remove_host(dws);
 }
 
 #ifdef CONFIG_PM_SLEEP
 static int spi_suspend(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
-	struct dw_spi_pci *dwpci = pci_get_drvdata(pdev);
+	struct dw_spi *dws = pci_get_drvdata(pdev);
 
-	return dw_spi_suspend_host(&dwpci->dws);
+	return dw_spi_suspend_host(dws);
 }
 
 static int spi_resume(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
-	struct dw_spi_pci *dwpci = pci_get_drvdata(pdev);
+	struct dw_spi *dws = pci_get_drvdata(pdev);
 
-	return dw_spi_resume_host(&dwpci->dws);
+	return dw_spi_resume_host(dws);
 }
 #endif
 

drivers/spi/spi-dw.c

@@ -30,19 +30,13 @@
 
 /* Slave spi_dev related */
 struct chip_data {
-	u16 cr0;
 	u8 cs;			/* chip select pin */
-	u8 n_bytes;		/* current is a 1/2/4 byte op */
 	u8 tmode;		/* TR/TO/RO/EEPROM */
 	u8 type;		/* SPI/SSP/MicroWire */
 
 	u8 poll_mode;		/* 1 means use poll mode */
 
-	u32 dma_width;
-	u32 rx_threshold;
-	u32 tx_threshold;
 	u8 enable_dma;
-	u8 bits_per_word;
 	u16 clk_div;		/* baud rate divider */
 	u32 speed_hz;		/* baud rate */
 	void (*cs_control)(u32 command);
@@ -289,14 +283,11 @@ static int dw_spi_transfer_one(struct spi_master *master,
 	struct chip_data *chip = spi_get_ctldata(spi);
 	u8 imask = 0;
 	u16 txlevel = 0;
-	u16 clk_div = 0;
+	u16 clk_div;
-	u32 speed = 0;
+	u32 cr0;
-	u32 cr0 = 0;
 	int ret;
 
 	dws->dma_mapped = 0;
-	dws->n_bytes = chip->n_bytes;
-	dws->dma_width = chip->dma_width;
 
 	dws->tx = (void *)transfer->tx_buf;
 	dws->tx_end = dws->tx + transfer->len;
@@ -306,37 +297,30 @@ static int dw_spi_transfer_one(struct spi_master *master,
 
 	spi_enable_chip(dws, 0);
 
-	cr0 = chip->cr0;
-
 	/* Handle per transfer options for bpw and speed */
-	if (transfer->speed_hz) {
+	if (transfer->speed_hz != chip->speed_hz) {
-		speed = chip->speed_hz;
+		/* clk_div doesn't support odd number */
+		clk_div = (dws->max_freq / transfer->speed_hz + 1) & 0xfffe;
 
-		if ((transfer->speed_hz != speed) || !chip->clk_div) {
+		chip->speed_hz = transfer->speed_hz;
-			speed = transfer->speed_hz;
+		chip->clk_div = clk_div;
 
-			/* clk_div doesn't support odd number */
+		spi_set_clk(dws, chip->clk_div);
-			clk_div = (dws->max_freq / speed + 1) & 0xfffe;
-
-			chip->speed_hz = speed;
-			chip->clk_div = clk_div;
-
-			spi_set_clk(dws, chip->clk_div);
-		}
 	}
-	if (transfer->bits_per_word) {
+	if (transfer->bits_per_word == 8) {
-		if (transfer->bits_per_word == 8) {
+		dws->n_bytes = 1;
-			dws->n_bytes = 1;
+		dws->dma_width = 1;
-			dws->dma_width = 1;
+	} else if (transfer->bits_per_word == 16) {
-		} else if (transfer->bits_per_word == 16) {
+		dws->n_bytes = 2;
-			dws->n_bytes = 2;
+		dws->dma_width = 2;
-			dws->dma_width = 2;
+	} else {
-		}
+		return -EINVAL;
-		cr0 = (transfer->bits_per_word - 1)
-			| (chip->type << SPI_FRF_OFFSET)
-			| (spi->mode << SPI_MODE_OFFSET)
-			| (chip->tmode << SPI_TMOD_OFFSET);
 	}
+	/* Default SPI mode is SCPOL = 0, SCPH = 0 */
+	cr0 = (transfer->bits_per_word - 1)
+		| (chip->type << SPI_FRF_OFFSET)
+		| (spi->mode << SPI_MODE_OFFSET)
+		| (chip->tmode << SPI_TMOD_OFFSET);
 
 	/*
 	 * Adjust transfer mode if necessary. Requires platform dependent
@@ -439,34 +423,9 @@ static int dw_spi_setup(struct spi_device *spi)
 
 		chip->poll_mode = chip_info->poll_mode;
 		chip->type = chip_info->type;
-
-		chip->rx_threshold = 0;
-		chip->tx_threshold = 0;
-	}
-
-	if (spi->bits_per_word == 8) {
-		chip->n_bytes = 1;
-		chip->dma_width = 1;
-	} else if (spi->bits_per_word == 16) {
-		chip->n_bytes = 2;
-		chip->dma_width = 2;
-	}
-	chip->bits_per_word = spi->bits_per_word;
-
-	if (!spi->max_speed_hz) {
-		dev_err(&spi->dev, "No max speed HZ parameter\n");
-		return -EINVAL;
 	}
 
 	chip->tmode = 0; /* Tx & Rx */
-	/* Default SPI mode is SCPOL = 0, SCPH = 0 */
-	chip->cr0 = (chip->bits_per_word - 1)
-			| (chip->type << SPI_FRF_OFFSET)
-			| (spi->mode  << SPI_MODE_OFFSET)
-			| (chip->tmode << SPI_TMOD_OFFSET);
-
-	if (spi->mode & SPI_LOOP)
-		chip->cr0 |= 1 << SPI_SRL_OFFSET;
 
 	if (gpio_is_valid(spi->cs_gpio)) {
 		ret = gpio_direction_output(spi->cs_gpio,
@@ -524,13 +483,12 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
 	dws->master = master;
 	dws->type = SSI_MOTO_SPI;
 	dws->dma_inited = 0;
-	dws->dma_addr = (dma_addr_t)(dws->paddr + 0x60);
+	dws->dma_addr = (dma_addr_t)(dws->paddr + DW_SPI_DR);
 	snprintf(dws->name, sizeof(dws->name), "dw_spi%d", dws->bus_num);
 
-	ret = devm_request_irq(dev, dws->irq, dw_spi_irq, IRQF_SHARED,
+	ret = request_irq(dws->irq, dw_spi_irq, IRQF_SHARED, dws->name, master);
-			dws->name, master);
 	if (ret < 0) {
-		dev_err(&master->dev, "can not get IRQ\n");
+		dev_err(dev, "can not get IRQ\n");
 		goto err_free_master;
 	}
 
@@ -573,6 +531,7 @@ err_dma_exit:
 	if (dws->dma_ops && dws->dma_ops->dma_exit)
 		dws->dma_ops->dma_exit(dws);
 	spi_enable_chip(dws, 0);
+	free_irq(dws->irq, master);
 err_free_master:
 	spi_master_put(master);
 	return ret;
@@ -581,28 +540,27 @@ EXPORT_SYMBOL_GPL(dw_spi_add_host);
 
 void dw_spi_remove_host(struct dw_spi *dws)
 {
-	if (!dws)
-		return;
 	dw_spi_debugfs_remove(dws);
 
 	if (dws->dma_ops && dws->dma_ops->dma_exit)
 		dws->dma_ops->dma_exit(dws);
-	spi_enable_chip(dws, 0);
+
-	/* Disable clk */
+	spi_shutdown_chip(dws);
-	spi_set_clk(dws, 0);
+
+	free_irq(dws->irq, dws->master);
 }
 EXPORT_SYMBOL_GPL(dw_spi_remove_host);
 
 int dw_spi_suspend_host(struct dw_spi *dws)
 {
-	int ret = 0;
+	int ret;
 
 	ret = spi_master_suspend(dws->master);
 	if (ret)
 		return ret;
-	spi_enable_chip(dws, 0);
+
-	spi_set_clk(dws, 0);
+	spi_shutdown_chip(dws);
-	return ret;
+	return 0;
 }
 EXPORT_SYMBOL_GPL(dw_spi_suspend_host);
 

drivers/spi/spi-dw.h

@@ -225,6 +225,12 @@ static inline void spi_reset_chip(struct dw_spi *dws)
 	spi_enable_chip(dws, 1);
 }
 
+static inline void spi_shutdown_chip(struct dw_spi *dws)
+{
+	spi_enable_chip(dws, 0);
+	spi_set_clk(dws, 0);
+}
+
 /*
  * Each SPI slave device to work with dw_api controller should
  * has such a structure claiming its working mode (poll or PIO/DMA),