ASoC: Intel: bytcr_rt5651: Add support for Bay Trail CR / SSP0 using boards

Despite its name being prefixed with bytcr, before this commit the
bytcr_rt5651 machine driver could not work with Bay Trail CR boards,
as those only have SSP0 and it only supported SSP0-AIF1 setups.

This commit adds support for this, autodetecting AIF1 vs AIF2 based on
BIOS tables.

While at it also add support for SSP2-AIF2 setups, as that requires only
minimal extra code on top of the code adding SSP0-AIF1 / SSP0-AIF2 support.

Note this code is all copy-pasted from bytcr_rt5640.c. I've looked into
merging the 2 machine drivers into 1 to avoid copy-pasting, but there are
enough subtile differences to make this hard *and* with all the quirks the
machine driver already is full with if (variant-foo) then ... else ...
constructs adding more of these is going to make the code unreadable.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/intel/boards/bytcr_rt5651.c

@@ -27,6 +27,7 @@
 #include <linux/device.h>
 #include <linux/dmi.h>
 #include <linux/slab.h>
+#include <asm/cpu_device_id.h>
 #include <asm/platform_sst_audio.h>
 #include <sound/pcm.h>
 #include <sound/pcm_params.h>
@@ -72,6 +73,9 @@ enum {
 #define BYT_RT5651_DMIC_EN		BIT(16)
 #define BYT_RT5651_MCLK_EN		BIT(17)
 #define BYT_RT5651_MCLK_25MHZ		BIT(18)
+#define BYT_RT5651_SSP2_AIF2		BIT(19) /* default is using AIF1  */
+#define BYT_RT5651_SSP0_AIF1		BIT(20)
+#define BYT_RT5651_SSP0_AIF2		BIT(21)
 
 /* jack-detect-source + dmic-en + ovcd-th + -sf + terminating empty entry */
 #define MAX_NO_PROPS 5
@@ -81,8 +85,7 @@ struct byt_rt5651_private {
 	struct snd_soc_jack jack;
 };
 
-static unsigned long byt_rt5651_quirk = BYT_RT5651_DMIC_MAP |
+static unsigned long byt_rt5651_quirk = BYT_RT5651_MCLK_EN;
-					BYT_RT5651_MCLK_EN;
 
 static void log_quirks(struct device *dev)
 {
@@ -110,9 +113,16 @@ static void log_quirks(struct device *dev)
 		dev_info(dev, "quirk MCLK_EN enabled");
 	if (byt_rt5651_quirk & BYT_RT5651_MCLK_25MHZ)
 		dev_info(dev, "quirk MCLK_25MHZ enabled");
+	if (byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2)
+		dev_info(dev, "quirk SSP2_AIF2 enabled\n");
+	if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1)
+		dev_info(dev, "quirk SSP0_AIF1 enabled\n");
+	if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)
+		dev_info(dev, "quirk SSP0_AIF2 enabled\n");
 }
 
 #define BYT_CODEC_DAI1	"rt5651-aif1"
+#define BYT_CODEC_DAI2	"rt5651-aif2"
 
 static int byt_rt5651_prepare_and_enable_pll1(struct snd_soc_dai *codec_dai,
 					      int rate, int bclk_ratio)
@@ -156,6 +166,8 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
 	int ret;
 
 	codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI1);
+	if (!codec_dai)
+		codec_dai = snd_soc_card_get_codec_dai(card, BYT_CODEC_DAI2);
 	if (!codec_dai) {
 		dev_err(card->dev,
 			"Codec dai not found; Unable to set platform clock\n");
@@ -213,13 +225,6 @@ static const struct snd_soc_dapm_route byt_rt5651_audio_map[] = {
 	{"Speaker", NULL, "Platform Clock"},
 	{"Line In", NULL, "Platform Clock"},
 
-	{"AIF1 Playback", NULL, "ssp2 Tx"},
-	{"ssp2 Tx", NULL, "codec_out0"},
-	{"ssp2 Tx", NULL, "codec_out1"},
-	{"codec_in0", NULL, "ssp2 Rx"},
-	{"codec_in1", NULL, "ssp2 Rx"},
-	{"ssp2 Rx", NULL, "AIF1 Capture"},
-
 	{"Headset Mic", NULL, "micbias1"}, /* lowercase for rt5651 */
 	{"Headphone", NULL, "HPOL"},
 	{"Headphone", NULL, "HPOR"},
@@ -267,6 +272,42 @@ static const struct snd_soc_dapm_route byt_rt5651_intmic_in2_hs_in3_map[] = {
 	{"IN3P", NULL, "Headset Mic"},
 };
 
+static const struct snd_soc_dapm_route byt_rt5651_ssp0_aif1_map[] = {
+	{"ssp0 Tx", NULL, "modem_out"},
+	{"modem_in", NULL, "ssp0 Rx"},
+
+	{"AIF1 Playback", NULL, "ssp0 Tx"},
+	{"ssp0 Rx", NULL, "AIF1 Capture"},
+};
+
+static const struct snd_soc_dapm_route byt_rt5651_ssp0_aif2_map[] = {
+	{"ssp0 Tx", NULL, "modem_out"},
+	{"modem_in", NULL, "ssp0 Rx"},
+
+	{"AIF2 Playback", NULL, "ssp0 Tx"},
+	{"ssp0 Rx", NULL, "AIF2 Capture"},
+};
+
+static const struct snd_soc_dapm_route byt_rt5651_ssp2_aif1_map[] = {
+	{"ssp2 Tx", NULL, "codec_out0"},
+	{"ssp2 Tx", NULL, "codec_out1"},
+	{"codec_in0", NULL, "ssp2 Rx"},
+	{"codec_in1", NULL, "ssp2 Rx"},
+
+	{"AIF1 Playback", NULL, "ssp2 Tx"},
+	{"ssp2 Rx", NULL, "AIF1 Capture"},
+};
+
+static const struct snd_soc_dapm_route byt_rt5651_ssp2_aif2_map[] = {
+	{"ssp2 Tx", NULL, "codec_out0"},
+	{"ssp2 Tx", NULL, "codec_out1"},
+	{"codec_in0", NULL, "ssp2 Rx"},
+	{"codec_in1", NULL, "ssp2 Rx"},
+
+	{"AIF2 Playback", NULL, "ssp2 Tx"},
+	{"ssp2 Rx", NULL, "AIF2 Capture"},
+};
+
 static const struct snd_kcontrol_new byt_rt5651_controls[] = {
 	SOC_DAPM_PIN_SWITCH("Headphone"),
 	SOC_DAPM_PIN_SWITCH("Headset Mic"),
@@ -291,9 +332,16 @@ static int byt_rt5651_aif1_hw_params(struct snd_pcm_substream *substream,
 {
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_dai *codec_dai = rtd->codec_dai;
+	snd_pcm_format_t format = params_format(params);
 	int rate = params_rate(params);
+	int bclk_ratio;
 
-	return byt_rt5651_prepare_and_enable_pll1(codec_dai, rate, 50);
+	if (format == SNDRV_PCM_FORMAT_S16_LE)
+		bclk_ratio = 32;
+	else
+		bclk_ratio = 50;
+
+	return byt_rt5651_prepare_and_enable_pll1(codec_dai, rate, bclk_ratio);
 }
 
 static int byt_rt5651_quirk_cb(const struct dmi_system_id *id)
@@ -420,6 +468,26 @@ static int byt_rt5651_init(struct snd_soc_pcm_runtime *runtime)
 	if (ret)
 		return ret;
 
+	if (byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) {
+		ret = snd_soc_dapm_add_routes(&card->dapm,
+					byt_rt5651_ssp2_aif2_map,
+					ARRAY_SIZE(byt_rt5651_ssp2_aif2_map));
+	} else if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) {
+		ret = snd_soc_dapm_add_routes(&card->dapm,
+					byt_rt5651_ssp0_aif1_map,
+					ARRAY_SIZE(byt_rt5651_ssp0_aif1_map));
+	} else if (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2) {
+		ret = snd_soc_dapm_add_routes(&card->dapm,
+					byt_rt5651_ssp0_aif2_map,
+					ARRAY_SIZE(byt_rt5651_ssp0_aif2_map));
+	} else {
+		ret = snd_soc_dapm_add_routes(&card->dapm,
+					byt_rt5651_ssp2_aif1_map,
+					ARRAY_SIZE(byt_rt5651_ssp2_aif1_map));
+	}
+	if (ret)
+		return ret;
+
 	ret = snd_soc_add_card_controls(card, byt_rt5651_controls,
 					ARRAY_SIZE(byt_rt5651_controls));
 	if (ret) {
@@ -485,18 +553,26 @@ static int byt_rt5651_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 			SNDRV_PCM_HW_PARAM_RATE);
 	struct snd_interval *channels = hw_param_interval(params,
 						SNDRV_PCM_HW_PARAM_CHANNELS);
-	int ret;
+	int ret, bits;
 
-	/* The DSP will covert the FE rate to 48k, stereo, 24bits */
+	/* The DSP will covert the FE rate to 48k, stereo */
 	rate->min = rate->max = 48000;
 	channels->min = channels->max = 2;
 
-	/* set SSP2 to 24-bit */
+	if ((byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) ||
-	params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
+	    (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) {
+		/* set SSP0 to 16-bit */
+		params_set_format(params, SNDRV_PCM_FORMAT_S16_LE);
+		bits = 16;
+	} else {
+		/* set SSP2 to 24-bit */
+		params_set_format(params, SNDRV_PCM_FORMAT_S24_LE);
+		bits = 24;
+	}
 
 	/*
 	 * Default mode for SSP configuration is TDM 4 slot, override config
-	 * with explicit setting to I2S 2ch 24-bit. The word length is set with
+	 * with explicit setting to I2S 2ch. The word length is set with
 	 * dai_set_tdm_slot() since there is no other API exposed
 	 */
 	ret = snd_soc_dai_set_fmt(rtd->cpu_dai,
@@ -510,7 +586,7 @@ static int byt_rt5651_codec_fixup(struct snd_soc_pcm_runtime *rtd,
 		return ret;
 	}
 
-	ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, 24);
+	ret = snd_soc_dai_set_tdm_slot(rtd->cpu_dai, 0x3, 0x3, 2, bits);
 	if (ret < 0) {
 		dev_err(rtd->dev, "can't set I2S config, err %d\n", ret);
 		return ret;
@@ -605,12 +681,32 @@ static struct snd_soc_card byt_rt5651_card = {
 };
 
 static char byt_rt5651_codec_name[SND_ACPI_I2C_ID_LEN];
+static char byt_rt5651_codec_aif_name[12]; /*  = "rt5651-aif[1|2]" */
+static char byt_rt5651_cpu_dai_name[10]; /*  = "ssp[0|2]-port" */
+
+static bool is_valleyview(void)
+{
+	static const struct x86_cpu_id cpu_ids[] = {
+		{ X86_VENDOR_INTEL, 6, 55 }, /* Valleyview, Bay Trail */
+		{}
+	};
+
+	if (!x86_match_cpu(cpu_ids))
+		return false;
+	return true;
+}
+
+struct acpi_chan_package {   /* ACPICA seems to require 64 bit integers */
+	u64 aif_value;       /* 1: AIF1, 2: AIF2 */
+	u64 mclock_value;    /* usually 25MHz (0x17d7940), ignored */
+};
 
 static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 {
 	struct byt_rt5651_private *priv;
 	struct snd_soc_acpi_mach *mach;
 	const char *i2c_name = NULL;
+	bool is_bytcr = false;
 	int ret_val = 0;
 	int dai_index = 0;
 	int i;
@@ -643,6 +739,73 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 		"%s%s", "i2c-", i2c_name);
 	byt_rt5651_dais[dai_index].codec_name = byt_rt5651_codec_name;
 
+	/*
+	 * swap SSP0 if bytcr is detected
+	 * (will be overridden if DMI quirk is detected)
+	 */
+	if (is_valleyview()) {
+		struct sst_platform_info *p_info = mach->pdata;
+		const struct sst_res_info *res_info = p_info->res_info;
+
+		if (res_info->acpi_ipc_irq_index == 0)
+			is_bytcr = true;
+	}
+
+	if (is_bytcr) {
+		/*
+		 * Baytrail CR platforms may have CHAN package in BIOS, try
+		 * to find relevant routing quirk based as done on Windows
+		 * platforms. We have to read the information directly from the
+		 * BIOS, at this stage the card is not created and the links
+		 * with the codec driver/pdata are non-existent
+		 */
+
+		struct acpi_chan_package chan_package;
+
+		/* format specified: 2 64-bit integers */
+		struct acpi_buffer format = {sizeof("NN"), "NN"};
+		struct acpi_buffer state = {0, NULL};
+		struct snd_soc_acpi_package_context pkg_ctx;
+		bool pkg_found = false;
+
+		state.length = sizeof(chan_package);
+		state.pointer = &chan_package;
+
+		pkg_ctx.name = "CHAN";
+		pkg_ctx.length = 2;
+		pkg_ctx.format = &format;
+		pkg_ctx.state = &state;
+		pkg_ctx.data_valid = false;
+
+		pkg_found = snd_soc_acpi_find_package_from_hid(mach->id,
+							       &pkg_ctx);
+		if (pkg_found) {
+			if (chan_package.aif_value == 1) {
+				dev_info(&pdev->dev, "BIOS Routing: AIF1 connected\n");
+				byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF1;
+			} else  if (chan_package.aif_value == 2) {
+				dev_info(&pdev->dev, "BIOS Routing: AIF2 connected\n");
+				byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF2;
+			} else {
+				dev_info(&pdev->dev, "BIOS Routing isn't valid, ignored\n");
+				pkg_found = false;
+			}
+		}
+
+		if (!pkg_found) {
+			/* no BIOS indications, assume SSP0-AIF2 connection */
+			byt_rt5651_quirk |= BYT_RT5651_SSP0_AIF2;
+		}
+
+		/* change defaults for Baytrail-CR capture */
+		byt_rt5651_quirk |= BYT_RT5651_JD1_1 |
+				    BYT_RT5651_OVCD_TH_2000UA |
+				    BYT_RT5651_OVCD_SF_0P75 |
+				    BYT_RT5651_IN2_HS_IN3_MAP;
+	} else {
+		byt_rt5651_quirk |= BYT_RT5651_DMIC_MAP;
+	}
+
 	/* check quirks before creating card */
 	dmi_check_system(byt_rt5651_quirk_table);
 
@@ -653,6 +816,28 @@ static int snd_byt_rt5651_mc_probe(struct platform_device *pdev)
 
 	log_quirks(&pdev->dev);
 
+	if ((byt_rt5651_quirk & BYT_RT5651_SSP2_AIF2) ||
+	    (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) {
+		/* fixup codec aif name */
+		snprintf(byt_rt5651_codec_aif_name,
+			sizeof(byt_rt5651_codec_aif_name),
+			"%s", "rt5651-aif2");
+
+		byt_rt5651_dais[dai_index].codec_dai_name =
+			byt_rt5651_codec_aif_name;
+	}
+
+	if ((byt_rt5651_quirk & BYT_RT5651_SSP0_AIF1) ||
+	    (byt_rt5651_quirk & BYT_RT5651_SSP0_AIF2)) {
+		/* fixup cpu dai name name */
+		snprintf(byt_rt5651_cpu_dai_name,
+			sizeof(byt_rt5651_cpu_dai_name),
+			"%s", "ssp0-port");
+
+		byt_rt5651_dais[dai_index].cpu_dai_name =
+			byt_rt5651_cpu_dai_name;
+	}
+
 	if (byt_rt5651_quirk & BYT_RT5651_MCLK_EN) {
 		priv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3");
 		if (IS_ERR(priv->mclk)) {