mtd: nand: pxa3xx: Add ECC BCH correctable errors detection

This commit extends the ECC correctable error detection to include
ECC BCH errors. The number of BCH correctable errors can be any up to 16,
and the actual value is exposed in the NDSR register.

Therefore, we change some symbol names to refer to correctable or
uncorrectable (instead of single-bit or double-bit as it was in the
Hamming case) and while at it, cleanup the detection code slightly.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
This commit is contained in:
Ezequiel Garcia 2013-11-14 18:25:39 -03:00 committed by Brian Norris
parent 535cb57a4d
commit 87f5336eef
1 changed files with 35 additions and 22 deletions

View File

@ -85,6 +85,9 @@
#define NDCR_INT_MASK (0xFFF)
#define NDSR_MASK (0xfff)
#define NDSR_ERR_CNT_OFF (16)
#define NDSR_ERR_CNT_MASK (0x1f)
#define NDSR_ERR_CNT(sr) ((sr >> NDSR_ERR_CNT_OFF) & NDSR_ERR_CNT_MASK)
#define NDSR_RDY (0x1 << 12)
#define NDSR_FLASH_RDY (0x1 << 11)
#define NDSR_CS0_PAGED (0x1 << 10)
@ -93,8 +96,8 @@
#define NDSR_CS1_CMDD (0x1 << 7)
#define NDSR_CS0_BBD (0x1 << 6)
#define NDSR_CS1_BBD (0x1 << 5)
#define NDSR_DBERR (0x1 << 4)
#define NDSR_SBERR (0x1 << 3)
#define NDSR_UNCORERR (0x1 << 4)
#define NDSR_CORERR (0x1 << 3)
#define NDSR_WRDREQ (0x1 << 2)
#define NDSR_RDDREQ (0x1 << 1)
#define NDSR_WRCMDREQ (0x1)
@ -135,9 +138,9 @@ enum {
ERR_NONE = 0,
ERR_DMABUSERR = -1,
ERR_SENDCMD = -2,
ERR_DBERR = -3,
ERR_UNCORERR = -3,
ERR_BBERR = -4,
ERR_SBERR = -5,
ERR_CORERR = -5,
};
enum {
@ -221,6 +224,8 @@ struct pxa3xx_nand_info {
unsigned int oob_size;
unsigned int spare_size;
unsigned int ecc_size;
unsigned int ecc_err_cnt;
unsigned int max_bitflips;
int retcode;
/* cached register value */
@ -567,10 +572,25 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
status = nand_readl(info, NDSR);
if (status & NDSR_DBERR)
info->retcode = ERR_DBERR;
if (status & NDSR_SBERR)
info->retcode = ERR_SBERR;
if (status & NDSR_UNCORERR)
info->retcode = ERR_UNCORERR;
if (status & NDSR_CORERR) {
info->retcode = ERR_CORERR;
if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 &&
info->ecc_bch)
info->ecc_err_cnt = NDSR_ERR_CNT(status);
else
info->ecc_err_cnt = 1;
/*
* Each chunk composing a page is corrected independently,
* and we need to store maximum number of corrected bitflips
* to return it to the MTD layer in ecc.read_page().
*/
info->max_bitflips = max_t(unsigned int,
info->max_bitflips,
info->ecc_err_cnt);
}
if (status & (NDSR_RDDREQ | NDSR_WRDREQ)) {
/* whether use dma to transfer data */
if (info->use_dma) {
@ -668,6 +688,7 @@ static void prepare_start_command(struct pxa3xx_nand_info *info, int command)
info->use_ecc = 0;
info->use_spare = 1;
info->retcode = ERR_NONE;
info->ecc_err_cnt = 0;
info->ndcb3 = 0;
switch (command) {
@ -1049,26 +1070,18 @@ static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
{
struct pxa3xx_nand_host *host = mtd->priv;
struct pxa3xx_nand_info *info = host->info_data;
int max_bitflips = 0;
chip->read_buf(mtd, buf, mtd->writesize);
chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
if (info->retcode == ERR_SBERR) {
switch (info->use_ecc) {
case 1:
max_bitflips = 1;
mtd->ecc_stats.corrected++;
break;
case 0:
default:
break;
}
} else if (info->retcode == ERR_DBERR) {
if (info->retcode == ERR_CORERR && info->use_ecc) {
mtd->ecc_stats.corrected += info->ecc_err_cnt;
} else if (info->retcode == ERR_UNCORERR) {
/*
* for blank page (all 0xff), HW will calculate its ECC as
* 0, which is different from the ECC information within
* OOB, ignore such double bit errors
* OOB, ignore such uncorrectable errors
*/
if (is_buf_blank(buf, mtd->writesize))
info->retcode = ERR_NONE;
@ -1076,7 +1089,7 @@ static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
mtd->ecc_stats.failed++;
}
return max_bitflips;
return info->max_bitflips;
}
static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)