From 8665c18bece7965c3690ac3824bef2f97bae3d71 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 13 Jun 2015 14:37:51 +0200 Subject: [PATCH] phy-sun4i-usb: Add support for monitoring vbus via a power-supply On some boards there is no vbus_det gpio pin, instead vbus-detection for otg can be done via the pmic. This commit adds support for monitoring vbus_det via the power_supply exported by the pmic, enabling support for otg on these boards. Signed-off-by: Hans de Goede Signed-off-by: Kishon Vijay Abraham I --- .../devicetree/bindings/phy/sun4i-usb-phy.txt | 1 + drivers/phy/Kconfig | 1 + drivers/phy/phy-sun4i-usb.c | 76 +++++++++++++++++-- 3 files changed, 71 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt index 5f48979b4edc..0cebf7454517 100644 --- a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -29,6 +29,7 @@ Required properties: Optional properties: - usb0_id_det-gpios : gpio phandle for reading the otg id pin value - usb0_vbus_det-gpios : gpio phandle for detecting the presence of usb0 vbus +- usb0_vbus_power-supply: power-supply phandle for usb0 vbus presence detect - usb0_vbus-supply : regulator phandle for controller usb0 vbus - usb1_vbus-supply : regulator phandle for controller usb1 vbus - usb2_vbus-supply : regulator phandle for controller usb2 vbus diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index c0c1ad2e2c01..0fe9bff7b37b 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -209,6 +209,7 @@ config PHY_SUN4I_USB depends on ARCH_SUNXI && HAS_IOMEM && OF depends on RESET_CONTROLLER depends on EXTCON + depends on POWER_SUPPLY select GENERIC_PHY help Enable this to support the transceiver that is part of Allwinner diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c index 4ba9856ac71a..5138843ec42d 100644 --- a/drivers/phy/phy-sun4i-usb.c +++ b/drivers/phy/phy-sun4i-usb.c @@ -36,6 +36,7 @@ #include #include #include +#include #include #include #include @@ -108,6 +109,9 @@ struct sun4i_usb_phy_data { bool phy0_poll; struct gpio_desc *id_det_gpio; struct gpio_desc *vbus_det_gpio; + struct power_supply *vbus_power_supply; + struct notifier_block vbus_power_nb; + bool vbus_power_nb_registered; int id_det_irq; int vbus_det_irq; int id_det; @@ -352,6 +356,30 @@ static struct phy_ops sun4i_usb_phy_ops = { .owner = THIS_MODULE, }; +static int sun4i_usb_phy0_get_vbus_det(struct sun4i_usb_phy_data *data) +{ + if (data->vbus_det_gpio) + return gpiod_get_value_cansleep(data->vbus_det_gpio); + + if (data->vbus_power_supply) { + union power_supply_propval val; + int r; + + r = power_supply_get_property(data->vbus_power_supply, + POWER_SUPPLY_PROP_PRESENT, &val); + if (r == 0) + return val.intval; + } + + /* Fallback: report vbus as high */ + return 1; +} + +static bool sun4i_usb_phy0_have_vbus_det(struct sun4i_usb_phy_data *data) +{ + return data->vbus_det_gpio || data->vbus_power_supply; +} + static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work) { struct sun4i_usb_phy_data *data = @@ -360,10 +388,7 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work) int id_det, vbus_det, id_notify = 0, vbus_notify = 0; id_det = gpiod_get_value_cansleep(data->id_det_gpio); - if (data->vbus_det_gpio) - vbus_det = gpiod_get_value_cansleep(data->vbus_det_gpio); - else - vbus_det = 1; /* Report vbus as high */ + vbus_det = sun4i_usb_phy0_get_vbus_det(data); mutex_lock(&phy0->mutex); @@ -378,7 +403,7 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work) * without vbus detection report vbus low for long enough for * the musb-ip to end the current device session. */ - if (!data->vbus_det_gpio && id_det == 0) { + if (!sun4i_usb_phy0_have_vbus_det(data) && id_det == 0) { sun4i_usb_phy0_set_vbus_detect(phy0, 0); msleep(200); sun4i_usb_phy0_set_vbus_detect(phy0, 1); @@ -404,7 +429,7 @@ static void sun4i_usb_phy0_id_vbus_det_scan(struct work_struct *work) * without vbus detection report vbus low for long enough to * the musb-ip to end the current host session. */ - if (!data->vbus_det_gpio && id_det == 1) { + if (!sun4i_usb_phy0_have_vbus_det(data) && id_det == 1) { mutex_lock(&phy0->mutex); sun4i_usb_phy0_set_vbus_detect(phy0, 0); msleep(1000); @@ -430,6 +455,20 @@ static irqreturn_t sun4i_usb_phy0_id_vbus_det_irq(int irq, void *dev_id) return IRQ_HANDLED; } +static int sun4i_usb_phy0_vbus_notify(struct notifier_block *nb, + unsigned long val, void *v) +{ + struct sun4i_usb_phy_data *data = + container_of(nb, struct sun4i_usb_phy_data, vbus_power_nb); + struct power_supply *psy = v; + + /* Properties on the vbus_power_supply changed, scan vbus_det */ + if (val == PSY_EVENT_PROP_CHANGED && psy == data->vbus_power_supply) + mod_delayed_work(system_wq, &data->detect, DEBOUNCE_TIME); + + return NOTIFY_OK; +} + static struct phy *sun4i_usb_phy_xlate(struct device *dev, struct of_phandle_args *args) { @@ -446,6 +485,8 @@ static int sun4i_usb_phy_remove(struct platform_device *pdev) struct device *dev = &pdev->dev; struct sun4i_usb_phy_data *data = dev_get_drvdata(dev); + if (data->vbus_power_nb_registered) + power_supply_unreg_notifier(&data->vbus_power_nb); if (data->id_det_irq >= 0) devm_free_irq(dev, data->id_det_irq, data); if (data->vbus_det_irq >= 0) @@ -522,8 +563,18 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) data->vbus_det_gpio = NULL; } + if (of_find_property(np, "usb0_vbus_power-supply", NULL)) { + data->vbus_power_supply = devm_power_supply_get_by_phandle(dev, + "usb0_vbus_power-supply"); + if (IS_ERR(data->vbus_power_supply)) + return PTR_ERR(data->vbus_power_supply); + + if (!data->vbus_power_supply) + return -EPROBE_DEFER; + } + /* vbus_det without id_det makes no sense, and is not supported */ - if (data->vbus_det_gpio && !data->id_det_gpio) { + if (sun4i_usb_phy0_have_vbus_det(data) && !data->id_det_gpio) { dev_err(dev, "usb0_id_det missing or invalid\n"); return -ENODEV; } @@ -620,6 +671,17 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev) } } + if (data->vbus_power_supply) { + data->vbus_power_nb.notifier_call = sun4i_usb_phy0_vbus_notify; + data->vbus_power_nb.priority = 0; + ret = power_supply_reg_notifier(&data->vbus_power_nb); + if (ret) { + sun4i_usb_phy_remove(pdev); /* Stop detect work */ + return ret; + } + data->vbus_power_nb_registered = true; + } + phy_provider = devm_of_phy_provider_register(dev, sun4i_usb_phy_xlate); if (IS_ERR(phy_provider)) { sun4i_usb_phy_remove(pdev); /* Stop detect work */