pcmcia: use pcmcia_loop_config in misc pcmcia drivers

Use the config loop helper in misc pcmcia drivers.

CC: Harald Welte <laforge@gnumonks.org>
CC: <linux-parport@lists.infradead.org>
CC: Russell King <rmk+kernel@arm.linux.org.uk>
CC: Ed Okerson <eokerson@quicknet.net>
CC: linux-serial@vger.kernel.org
CC: boti@rocketmail.com
CC: linux-usb@vger.kernel.org
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
This commit is contained in:
Dominik Brodowski 2008-07-29 08:38:55 +02:00
parent b54bf94bf9
commit 84e2d34004
6 changed files with 299 additions and 401 deletions

View File

@ -1759,65 +1759,40 @@ static void cmm_cm4000_release(struct pcmcia_device * link)
/*==== Interface to PCMCIA Layer =======================================*/
static int cm4000_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
void *priv_data)
{
p_dev->conf.ConfigIndex = cfg->index;
if (!cfg->io.nwin)
return -ENODEV;
/* Get the IOaddr */
p_dev->io.BasePort1 = cfg->io.win[0].base;
p_dev->io.NumPorts1 = cfg->io.win[0].len;
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(cfg->io.flags & CISTPL_IO_8BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(cfg->io.flags & CISTPL_IO_16BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
return pcmcia_request_io(p_dev, &p_dev->io);
}
static int cm4000_config(struct pcmcia_device * link, int devno)
{
struct cm4000_dev *dev;
tuple_t tuple;
cisparse_t parse;
u_char buf[64];
int fail_fn, fail_rc;
int rc;
/* read the config-tuples */
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = sizeof(buf);
tuple.TupleOffset = 0;
link->io.BasePort2 = 0;
link->io.NumPorts2 = 0;
link->io.Attributes2 = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
for (rc = pcmcia_get_first_tuple(link, &tuple);
rc == CS_SUCCESS; rc = pcmcia_get_next_tuple(link, &tuple)) {
rc = pcmcia_get_tuple_data(link, &tuple);
if (rc != CS_SUCCESS)
continue;
rc = pcmcia_parse_tuple(link, &tuple, &parse);
if (rc != CS_SUCCESS)
continue;
link->conf.ConfigIndex = parse.cftable_entry.index;
if (!parse.cftable_entry.io.nwin)
continue;
/* Get the IOaddr */
link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(parse.cftable_entry.io.flags & CISTPL_IO_8BIT))
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(parse.cftable_entry.io.flags & CISTPL_IO_16BIT))
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.IOAddrLines = parse.cftable_entry.io.flags
& CISTPL_IO_LINES_MASK;
rc = pcmcia_request_io(link, &link->io);
if (rc == CS_SUCCESS)
break; /* we are done */
}
if (rc != CS_SUCCESS)
if (pcmcia_loop_config(link, cm4000_config_check, NULL))
goto cs_release;
link->conf.IntType = 00000002;
if ((fail_rc =
pcmcia_request_configuration(link, &link->conf)) != CS_SUCCESS) {
fail_fn = RequestConfiguration;
if (pcmcia_request_configuration(link, &link->conf))
goto cs_release;
}
dev = link->priv;
sprintf(dev->node.dev_name, DEVICE_NAME "%d", devno);

View File

@ -526,65 +526,49 @@ static void cm4040_reader_release(struct pcmcia_device *link)
return;
}
static int cm4040_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
void *priv_data)
{
int rc;
p_dev->conf.ConfigIndex = cfg->index;
if (!cfg->io.nwin)
return -ENODEV;
/* Get the IOaddr */
p_dev->io.BasePort1 = cfg->io.win[0].base;
p_dev->io.NumPorts1 = cfg->io.win[0].len;
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(cfg->io.flags & CISTPL_IO_8BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(cfg->io.flags & CISTPL_IO_16BIT))
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK;
rc = pcmcia_request_io(p_dev, &p_dev->io);
dev_printk(KERN_INFO, &handle_to_dev(p_dev),
"pcmcia_request_io returned 0x%x\n", rc);
return rc;
}
static int reader_config(struct pcmcia_device *link, int devno)
{
struct reader_dev *dev;
tuple_t tuple;
cisparse_t parse;
u_char buf[64];
int fail_fn, fail_rc;
int rc;
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = sizeof(buf);
tuple.TupleOffset = 0;
int fail_rc;
link->io.BasePort2 = 0;
link->io.NumPorts2 = 0;
link->io.Attributes2 = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
for (rc = pcmcia_get_first_tuple(link, &tuple);
rc == CS_SUCCESS;
rc = pcmcia_get_next_tuple(link, &tuple)) {
rc = pcmcia_get_tuple_data(link, &tuple);
if (rc != CS_SUCCESS)
continue;
rc = pcmcia_parse_tuple(link, &tuple, &parse);
if (rc != CS_SUCCESS)
continue;
link->conf.ConfigIndex = parse.cftable_entry.index;
if (!parse.cftable_entry.io.nwin)
continue;
link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
if (!(parse.cftable_entry.io.flags & CISTPL_IO_8BIT))
link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
if (!(parse.cftable_entry.io.flags & CISTPL_IO_16BIT))
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.IOAddrLines = parse.cftable_entry.io.flags
& CISTPL_IO_LINES_MASK;
rc = pcmcia_request_io(link, &link->io);
dev_printk(KERN_INFO, &handle_to_dev(link), "foo");
if (rc == CS_SUCCESS)
break;
else
dev_printk(KERN_INFO, &handle_to_dev(link),
"pcmcia_request_io failed 0x%x\n", rc);
}
if (rc != CS_SUCCESS)
if (pcmcia_loop_config(link, cm4040_config_check, NULL))
goto cs_release;
link->conf.IntType = 00000002;
if ((fail_rc = pcmcia_request_configuration(link,&link->conf))
!=CS_SUCCESS) {
fail_fn = RequestConfiguration;
dev_printk(KERN_INFO, &handle_to_dev(link),
"pcmcia_request_configuration failed 0x%x\n",
fail_rc);

View File

@ -149,52 +149,49 @@ static void parport_detach(struct pcmcia_device *link)
#define CS_CHECK(fn, ret) \
do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
static int parport_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
void *priv_data)
{
cistpl_cftable_entry_t *dflt = priv_data;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
p_dev->conf.ConfigIndex = cfg->index;
if (epp_mode)
p_dev->conf.ConfigIndex |= FORCE_EPP_MODE;
p_dev->io.BasePort1 = io->win[0].base;
p_dev->io.NumPorts1 = io->win[0].len;
p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
if (io->nwin == 2) {
p_dev->io.BasePort2 = io->win[1].base;
p_dev->io.NumPorts2 = io->win[1].len;
}
if (pcmcia_request_io(p_dev, &p_dev->io) != 0)
goto next_entry;
return 0;
}
next_entry:
if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
*dflt = *cfg;
return -ENODEV;
}
static int parport_config(struct pcmcia_device *link)
{
parport_info_t *info = link->priv;
tuple_t tuple;
u_short buf[128];
cisparse_t parse;
cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
cistpl_cftable_entry_t dflt = { 0 };
struct parport *p;
int last_ret, last_fn;
DEBUG(0, "parport_config(0x%p)\n", link);
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
tuple.Attributes = 0;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
while (1) {
if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
pcmcia_parse_tuple(link, &tuple, &parse) != 0)
goto next_entry;
if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
link->conf.ConfigIndex = cfg->index;
if (epp_mode)
link->conf.ConfigIndex |= FORCE_EPP_MODE;
link->io.BasePort1 = io->win[0].base;
link->io.NumPorts1 = io->win[0].len;
link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
if (io->nwin == 2) {
link->io.BasePort2 = io->win[1].base;
link->io.NumPorts2 = io->win[1].len;
}
if (pcmcia_request_io(link, &link->io) != 0)
goto next_entry;
/* If we've got this far, we're done */
break;
}
next_entry:
if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
DEBUG(0, "parport_config(0x%p)\n", link);
last_ret = pcmcia_loop_config(link, parport_config_check, &dflt);
if (last_ret) {
cs_error(link, RequestIO, last_ret);
goto failed;
}
CS_CHECK(RequestIRQ, pcmcia_request_irq(link, &link->irq));
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));

View File

@ -439,43 +439,55 @@ first_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
return pcmcia_parse_tuple(handle, tuple, parse);
}
static int
next_tuple(struct pcmcia_device *handle, tuple_t * tuple, cisparse_t * parse)
/*====================================================================*/
static int simple_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cf,
void *priv_data)
{
int i;
i = pcmcia_get_next_tuple(handle, tuple);
if (i != CS_SUCCESS)
return CS_NO_MORE_ITEMS;
i = pcmcia_get_tuple_data(handle, tuple);
if (i != CS_SUCCESS)
return i;
return pcmcia_parse_tuple(handle, tuple, parse);
static const int size_table[2] = { 8, 16 };
int *try = priv_data;
if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
p_dev->conf.Vpp =
cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[(*try >> 1)])
&& (cf->io.win[0].base != 0)) {
p_dev->conf.ConfigIndex = cf->index;
p_dev->io.BasePort1 = cf->io.win[0].base;
p_dev->io.IOAddrLines = ((*try & 0x1) == 0) ?
16 : cf->io.flags & CISTPL_IO_LINES_MASK;
if (!pcmcia_request_io(p_dev, &p_dev->io))
return 0;
}
return -EINVAL;
}
/*====================================================================*/
static int simple_config_check_notpicky(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cf,
void *priv_data)
{
static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
int j;
if ((cf->io.nwin > 0) && ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
p_dev->conf.ConfigIndex = cf->index;
for (j = 0; j < 5; j++) {
p_dev->io.BasePort1 = base[j];
p_dev->io.IOAddrLines = base[j] ? 16 : 3;
if (!pcmcia_request_io(p_dev, &p_dev->io))
return 0;
}
}
return -ENODEV;
}
static int simple_config(struct pcmcia_device *link)
{
static const unsigned int base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
static const int size_table[2] = { 8, 16 };
struct serial_info *info = link->priv;
struct serial_cfg_mem *cfg_mem;
tuple_t *tuple;
u_char *buf;
cisparse_t *parse;
cistpl_cftable_entry_t *cf;
config_info_t config;
int i, j, try;
int s;
cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
return -1;
tuple = &cfg_mem->tuple;
parse = &cfg_mem->parse;
cf = &parse->cftable_entry;
buf = cfg_mem->buf;
int i, try;
/* If the card is already configured, look up the port and irq */
i = pcmcia_get_configuration_info(link, &config);
@ -490,70 +502,28 @@ static int simple_config(struct pcmcia_device *link)
info->slave = 1;
}
if (info->slave) {
kfree(cfg_mem);
return setup_serial(link, info, port, config.AssignedIRQ);
}
}
/* First pass: look for a config entry that looks normal. */
tuple->TupleData = (cisdata_t *) buf;
tuple->TupleOffset = 0;
tuple->TupleDataMax = 255;
tuple->Attributes = 0;
tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
/* Two tries: without IO aliases, then with aliases */
for (s = 0; s < 2; s++) {
for (try = 0; try < 2; try++) {
i = first_tuple(link, tuple, parse);
while (i != CS_NO_MORE_ITEMS) {
if (i != CS_SUCCESS)
goto next_entry;
if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp =
cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) &&
(cf->io.win[0].base != 0)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines = (try == 0) ?
16 : cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link, &link->io);
if (i == CS_SUCCESS)
goto found_port;
}
next_entry:
i = next_tuple(link, tuple, parse);
}
}
}
/* First pass: look for a config entry that looks normal.
* Two tries: without IO aliases, then with aliases */
for (try = 0; try < 4; try++)
if (!pcmcia_loop_config(link, simple_config_check, &try))
goto found_port;
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
i = first_tuple(link, tuple, parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin > 0) &&
((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
link->conf.ConfigIndex = cf->index;
for (j = 0; j < 5; j++) {
link->io.BasePort1 = base[j];
link->io.IOAddrLines = base[j] ? 16 : 3;
i = pcmcia_request_io(link, &link->io);
if (i == CS_SUCCESS)
goto found_port;
}
}
i = next_tuple(link, tuple, parse);
}
if (!pcmcia_loop_config(link, simple_config_check_notpicky, NULL))
goto found_port;
found_port:
if (i != CS_SUCCESS) {
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
cs_error(link, RequestIO, i);
kfree(cfg_mem);
return -1;
}
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
cs_error(link, RequestIO, i);
return -1;
found_port:
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link, RequestIRQ, i);
@ -571,86 +541,72 @@ next_entry:
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link, RequestConfiguration, i);
kfree(cfg_mem);
return -1;
}
kfree(cfg_mem);
return setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
}
static int multi_config(struct pcmcia_device * link)
static int multi_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cf,
void *priv_data)
{
int *base2 = priv_data;
/* The quad port cards have bad CIS's, so just look for a
window larger than 8 ports and assume it will be right */
if ((cf->io.nwin == 1) && (cf->io.win[0].len > 8)) {
p_dev->conf.ConfigIndex = cf->index;
p_dev->io.BasePort1 = cf->io.win[0].base;
p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
if (!pcmcia_request_io(p_dev, &p_dev->io)) {
*base2 = p_dev->io.BasePort1 + 8;
return 0;
}
}
return -ENODEV;
}
static int multi_config_check_notpicky(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cf,
void *priv_data)
{
int *base2 = priv_data;
if (cf->io.nwin == 2) {
p_dev->conf.ConfigIndex = cf->index;
p_dev->io.BasePort1 = cf->io.win[0].base;
p_dev->io.BasePort2 = cf->io.win[1].base;
p_dev->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
if (!pcmcia_request_io(p_dev, &p_dev->io)) {
*base2 = p_dev->io.BasePort2;
return 0;
}
}
return -ENODEV;
}
static int multi_config(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
struct serial_cfg_mem *cfg_mem;
tuple_t *tuple;
u_char *buf;
cisparse_t *parse;
cistpl_cftable_entry_t *cf;
int i, rc, base2 = 0;
cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
return -1;
tuple = &cfg_mem->tuple;
parse = &cfg_mem->parse;
cf = &parse->cftable_entry;
buf = cfg_mem->buf;
tuple->TupleData = (cisdata_t *) buf;
tuple->TupleOffset = 0;
tuple->TupleDataMax = 255;
tuple->Attributes = 0;
tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
int i, base2 = 0;
/* First, look for a generic full-sized window */
link->io.NumPorts1 = info->multi * 8;
i = first_tuple(link, tuple, parse);
while (i != CS_NO_MORE_ITEMS) {
/* The quad port cards have bad CIS's, so just look for a
window larger than 8 ports and assume it will be right */
if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
(cf->io.win[0].len > 8)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines =
cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link, &link->io);
base2 = link->io.BasePort1 + 8;
if (i == CS_SUCCESS)
break;
}
i = next_tuple(link, tuple, parse);
}
/* If that didn't work, look for two windows */
if (i != CS_SUCCESS) {
if (pcmcia_loop_config(link, multi_config_check, &base2)) {
/* If that didn't work, look for two windows */
link->io.NumPorts1 = link->io.NumPorts2 = 8;
info->multi = 2;
i = first_tuple(link, tuple, parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.BasePort2 = cf->io.win[1].base;
link->io.IOAddrLines =
cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link, &link->io);
base2 = link->io.BasePort2;
if (i == CS_SUCCESS)
break;
}
i = next_tuple(link, tuple, parse);
if (pcmcia_loop_config(link, multi_config_check_notpicky,
&base2)) {
printk(KERN_NOTICE "serial_cs: no usable port range"
"found, giving up\n");
return -ENODEV;
}
}
if (i != CS_SUCCESS) {
cs_error(link, RequestIO, i);
rc = -1;
goto free_cfg_mem;
}
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
/* FIXME: comment does not fit, error handling does not fit */
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
cs_error(link, RequestIRQ, i);
@ -666,8 +622,7 @@ static int multi_config(struct pcmcia_device * link)
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link, RequestConfiguration, i);
rc = -1;
goto free_cfg_mem;
return -ENODEV;
}
/* The Oxford Semiconductor OXCF950 cards are in fact single-port:
@ -678,7 +633,8 @@ static int multi_config(struct pcmcia_device * link)
info->prodid == PRODID_POSSIO_GCC)) {
int err;
if (cf->index == 1 || cf->index == 3) {
if (link->conf.ConfigIndex == 1 ||
link->conf.ConfigIndex == 3) {
err = setup_serial(link, info, base2,
link->irq.AssignedIRQ);
base2 = link->io.BasePort1;
@ -695,18 +651,14 @@ static int multi_config(struct pcmcia_device * link)
if (info->quirk && info->quirk->wakeup)
info->quirk->wakeup(link);
rc = 0;
goto free_cfg_mem;
return 0;
}
setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
for (i = 0; i < info->multi - 1; i++)
setup_serial(link, info, base2 + (8 * i),
link->irq.AssignedIRQ);
rc = 0;
free_cfg_mem:
kfree(cfg_mem);
return rc;
return 0;
}
/*======================================================================

View File

@ -124,65 +124,57 @@ static void ixj_get_serial(struct pcmcia_device * link, IXJ * j)
return;
}
static int ixj_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
void *priv_data)
{
cistpl_cftable_entry_t *dflt = priv_data;
if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
p_dev->conf.ConfigIndex = cfg->index;
p_dev->io.BasePort1 = io->win[0].base;
p_dev->io.NumPorts1 = io->win[0].len;
if (io->nwin == 2) {
p_dev->io.BasePort2 = io->win[1].base;
p_dev->io.NumPorts2 = io->win[1].len;
}
if (pcmcia_request_io(p_dev, &p_dev->io)) {
if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
*dflt = *cfg;
} else
return 0;
}
return -ENODEV;
}
static int ixj_config(struct pcmcia_device * link)
{
IXJ *j;
ixj_info_t *info;
tuple_t tuple;
u_short buf[128];
cisparse_t parse;
cistpl_cftable_entry_t *cfg = &parse.cftable_entry;
cistpl_cftable_entry_t dflt =
{
0
};
int last_ret, last_fn;
cistpl_cftable_entry_t dflt = { 0 };
info = link->priv;
DEBUG(0, "ixj_config(0x%p)\n", link);
tuple.TupleData = (cisdata_t *) buf;
tuple.TupleOffset = 0;
tuple.TupleDataMax = 255;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
tuple.Attributes = 0;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
while (1) {
if (pcmcia_get_tuple_data(link, &tuple) != 0 ||
pcmcia_parse_tuple(link, &tuple, &parse) != 0)
goto next_entry;
if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
link->conf.ConfigIndex = cfg->index;
link->io.BasePort1 = io->win[0].base;
link->io.NumPorts1 = io->win[0].len;
if (io->nwin == 2) {
link->io.BasePort2 = io->win[1].base;
link->io.NumPorts2 = io->win[1].len;
}
if (pcmcia_request_io(link, &link->io) != 0)
goto next_entry;
/* If we've got this far, we're done */
break;
}
next_entry:
if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
dflt = *cfg;
CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple));
}
CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link, &link->conf));
if (pcmcia_loop_config(link, ixj_config_check, &dflt))
goto cs_failed;
if (pcmcia_request_configuration(link, &link->conf))
goto cs_failed;
/*
* Register the card with the core.
*/
j=ixj_pcmcia_probe(link->io.BasePort1,link->io.BasePort1 + 0x10);
*/
j = ixj_pcmcia_probe(link->io.BasePort1, link->io.BasePort1 + 0x10);
info->ndev = 1;
info->node.major = PHONE_MAJOR;
link->dev_node = &info->node;
ixj_get_serial(link, j);
return 0;
cs_failed:
cs_error(link, last_fn, last_ret);
ixj_cs_release(link);
return -ENODEV;
}

View File

@ -155,88 +155,84 @@ static void sl811_cs_release(struct pcmcia_device * link)
platform_device_unregister(&platform_dev);
}
struct sl811_css_cfg {
cistpl_cftable_entry_t dflt;
config_info_t conf;
};
static int sl811_cs_config_check(struct pcmcia_device *p_dev,
cistpl_cftable_entry_t *cfg,
void *priv_data)
{
struct sl811_css_cfg *cfg_mem = priv_data;
if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
memcpy(&cfg_mem->dflt, cfg, sizeof(cistpl_cftable_entry_t));
if (cfg->index == 0)
return -ENODEV;
p_dev->conf.ConfigIndex = cfg->index;
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000 !=
cfg_mem->conf.Vcc)
return -ENODEV;
} else if (cfg_mem->dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
if (cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM]/10000
!= cfg_mem->conf.Vcc)
return -ENODEV;
}
if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
p_dev->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
else if (cfg_mem->dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
p_dev->conf.Vpp =
cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
/* we need an interrupt */
if (cfg->irq.IRQInfo1 || cfg_mem->dflt.irq.IRQInfo1)
p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
p_dev->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
p_dev->io.BasePort1 = io->win[0].base;
p_dev->io.NumPorts1 = io->win[0].len;
return pcmcia_request_io(p_dev, &p_dev->io);
}
pcmcia_disable_device(p_dev);
return -ENODEV;
}
static int sl811_cs_config(struct pcmcia_device *link)
{
struct device *parent = &handle_to_dev(link);
local_info_t *dev = link->priv;
tuple_t tuple;
cisparse_t parse;
int last_fn, last_ret;
u_char buf[64];
config_info_t conf;
cistpl_cftable_entry_t dflt = { 0 };
struct sl811_css_cfg *cfg_mem;
DBG(0, "sl811_cs_config(0x%p)\n", link);
cfg_mem = kzalloc(sizeof(struct sl811_css_cfg), GFP_KERNEL);
if (!cfg_mem)
return -ENOMEM;
/* Look up the current Vcc */
CS_CHECK(GetConfigurationInfo,
pcmcia_get_configuration_info(link, &conf));
pcmcia_get_configuration_info(link, &cfg_mem->conf));
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = sizeof(buf);
tuple.TupleOffset = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple));
while (1) {
cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
if (pcmcia_get_tuple_data(link, &tuple) != 0
|| pcmcia_parse_tuple(link, &tuple, &parse)
!= 0)
goto next_entry;
if (cfg->flags & CISTPL_CFTABLE_DEFAULT) {
dflt = *cfg;
}
if (cfg->index == 0)
goto next_entry;
link->conf.ConfigIndex = cfg->index;
/* Use power settings for Vcc and Vpp if present */
/* Note that the CIS values need to be rescaled */
if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM)) {
if (cfg->vcc.param[CISTPL_POWER_VNOM]/10000
!= conf.Vcc)
goto next_entry;
} else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM)) {
if (dflt.vcc.param[CISTPL_POWER_VNOM]/10000
!= conf.Vcc)
goto next_entry;
}
if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
link->conf.Vpp =
cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
link->conf.Vpp =
dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
/* we need an interrupt */
if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
link->conf.Attributes |= CONF_ENABLE_IRQ;
/* IO window settings */
link->io.NumPorts1 = link->io.NumPorts2 = 0;
if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK;
link->io.BasePort1 = io->win[0].base;
link->io.NumPorts1 = io->win[0].len;
if (pcmcia_request_io(link, &link->io) != 0)
goto next_entry;
}
break;
next_entry:
pcmcia_disable_device(link);
last_ret = pcmcia_get_next_tuple(link, &tuple);
}
if (pcmcia_loop_config(link, sl811_cs_config_check, cfg_mem))
return -ENODEV;
/* require an IRQ and two registers */
if (!link->io.NumPorts1 || link->io.NumPorts1 < 2)
@ -269,8 +265,10 @@ cs_failed:
printk("sl811_cs_config failed\n");
cs_error(link, last_fn, last_ret);
sl811_cs_release(link);
kfree(cfg_mem);
return -ENODEV;
}
kfree(cfg_mem);
return 0;
}