Revert "libata: Implement support for sense data reporting"

This reverts commit fe7173c206.

As implemented, ACS-4 sense reporting for ATA devices bypasses error
diagnosis and handling in libata degrading EH behavior significantly.
Revert the related changes for now.

ATA_ID_COMMAND_SET_3/4 constants are not reverted as they're used by
later changes.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable@vger.kernel.org #v4.1+
This commit is contained in:
Tejun Heo 2015-08-03 11:45:34 -04:00
parent fe16d4f202
commit 84ded2f8e7
3 changed files with 4 additions and 118 deletions

View File

@ -2147,24 +2147,6 @@ static int ata_dev_config_ncq(struct ata_device *dev,
return 0;
}
static void ata_dev_config_sense_reporting(struct ata_device *dev)
{
unsigned int err_mask;
if (!ata_id_has_sense_reporting(dev->id))
return;
if (ata_id_sense_reporting_enabled(dev->id))
return;
err_mask = ata_dev_set_feature(dev, SETFEATURE_SENSE_DATA, 0x1);
if (err_mask) {
ata_dev_dbg(dev,
"failed to enable Sense Data Reporting, Emask 0x%x\n",
err_mask);
}
}
/**
* ata_dev_configure - Configure the specified ATA/ATAPI device
* @dev: Target device to configure
@ -2387,7 +2369,7 @@ int ata_dev_configure(struct ata_device *dev)
dev->devslp_timing[i] = sata_setting[j];
}
}
ata_dev_config_sense_reporting(dev);
dev->cdb_len = 16;
}

View File

@ -1629,70 +1629,6 @@ unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key)
return err_mask;
}
/**
* ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT
* @dev: device to perform REQUEST_SENSE_SENSE_DATA_EXT to
* @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
* @dfl_sense_key: default sense key to use
*
* Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK
* SENSE. This function is EH helper.
*
* LOCKING:
* Kernel thread context (may sleep).
*
* RETURNS:
* encoded sense data on success, 0 on failure or if sense data
* is not available.
*/
static u32 ata_eh_request_sense(struct ata_queued_cmd *qc,
struct scsi_cmnd *cmd)
{
struct ata_device *dev = qc->dev;
struct ata_taskfile tf;
unsigned int err_mask;
if (!cmd)
return 0;
DPRINTK("ATA request sense\n");
ata_dev_warn(dev, "request sense\n");
if (!ata_id_sense_reporting_enabled(dev->id)) {
ata_dev_warn(qc->dev, "sense data reporting disabled\n");
return 0;
}
ata_tf_init(dev, &tf);
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
tf.command = ATA_CMD_REQ_SENSE_DATA;
tf.protocol = ATA_PROT_NODATA;
err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
/*
* ACS-4 states:
* The device may set the SENSE DATA AVAILABLE bit to one in the
* STATUS field and clear the ERROR bit to zero in the STATUS field
* to indicate that the command returned completion without an error
* and the sense data described in table 306 is available.
*
* IOW the 'ATA_SENSE' bit might not be set even though valid
* sense data is available.
* So check for both.
*/
if ((tf.command & ATA_SENSE) ||
tf.lbah != 0 || tf.lbam != 0 || tf.lbal != 0) {
ata_scsi_set_sense(cmd, tf.lbah, tf.lbam, tf.lbal);
qc->flags |= ATA_QCFLAG_SENSE_VALID;
ata_dev_warn(dev, "sense data %02x/%02x/%02x\n",
tf.lbah, tf.lbam, tf.lbal);
} else {
ata_dev_warn(dev, "request sense failed stat %02x emask %x\n",
tf.command, err_mask);
}
return err_mask;
}
/**
* atapi_eh_request_sense - perform ATAPI REQUEST_SENSE
* @dev: device to perform REQUEST_SENSE to
@ -1896,22 +1832,7 @@ static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
return ATA_EH_RESET;
}
/*
* Sense data reporting does not work if the
* device fault bit is set.
*/
if ((stat & ATA_SENSE) && !(stat & ATA_DF) &&
!(qc->flags & ATA_QCFLAG_SENSE_VALID)) {
if (!(qc->ap->pflags & ATA_PFLAG_FROZEN)) {
tmp = ata_eh_request_sense(qc, qc->scsicmd);
if (tmp)
qc->err_mask |= tmp;
} else {
ata_dev_warn(qc->dev, "sense data available but port frozen\n");
}
}
/* Set by NCQ autosense or request sense above */
/* Set by NCQ autosense */
if (qc->flags & ATA_QCFLAG_SENSE_VALID)
return 0;
@ -2658,15 +2579,14 @@ static void ata_eh_link_report(struct ata_link *link)
#ifdef CONFIG_ATA_VERBOSE_ERROR
if (res->command & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
ATA_SENSE | ATA_ERR)) {
ATA_ERR)) {
if (res->command & ATA_BUSY)
ata_dev_err(qc->dev, "status: { Busy }\n");
else
ata_dev_err(qc->dev, "status: { %s%s%s%s%s}\n",
ata_dev_err(qc->dev, "status: { %s%s%s%s}\n",
res->command & ATA_DRDY ? "DRDY " : "",
res->command & ATA_DF ? "DF " : "",
res->command & ATA_DRQ ? "DRQ " : "",
res->command & ATA_SENSE ? "SENSE " : "",
res->command & ATA_ERR ? "ERR " : "");
}

View File

@ -385,8 +385,6 @@ enum {
SATA_SSP = 0x06, /* Software Settings Preservation */
SATA_DEVSLP = 0x09, /* Device Sleep */
SETFEATURE_SENSE_DATA = 0xC3, /* Sense Data Reporting feature */
/* feature values for SET_MAX */
ATA_SET_MAX_ADDR = 0x00,
ATA_SET_MAX_PASSWD = 0x01,
@ -720,20 +718,6 @@ static inline bool ata_id_has_read_log_dma_ext(const u16 *id)
return false;
}
static inline bool ata_id_has_sense_reporting(const u16 *id)
{
if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15)))
return false;
return id[ATA_ID_COMMAND_SET_3] & (1 << 6);
}
static inline bool ata_id_sense_reporting_enabled(const u16 *id)
{
if (!(id[ATA_ID_CFS_ENABLE_2] & (1 << 15)))
return false;
return id[ATA_ID_COMMAND_SET_4] & (1 << 6);
}
/**
* ata_id_major_version - get ATA level of drive
* @id: Identify data