From 6e093d9dfffc9a02cd54d36904c62f705f09900a Mon Sep 17 00:00:00 2001 From: Brian Haley Date: Wed, 12 Nov 2008 22:59:21 -0800 Subject: [PATCH 01/27] ipv6: routing header fixes This patch fixes two bugs: 1. setsockopt() of anything but a Type 2 routing header should return EINVAL instead of EPERM. Noticed by Shan Wei (shanwei@cn.fujitsu.com). 2. setsockopt()/sendmsg() of a Type 2 routing header with invalid length or segments should return EINVAL. These values are statically fixed in RFC 3775, unlike the variable Type 0 was. Signed-off-by: Brian Haley Signed-off-by: David S. Miller --- net/ipv6/datagram.c | 5 +++++ net/ipv6/ipv6_sockglue.c | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 410046a8cc91..e44deb8d4df2 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -661,6 +661,11 @@ int datagram_send_ctl(struct net *net, switch (rthdr->type) { #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) case IPV6_SRCRT_TYPE_2: + if (rthdr->hdrlen != 2 || + rthdr->segments_left != 1) { + err = -EINVAL; + goto exit_f; + } break; #endif default: diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 4e5eac301f91..2aa294be0c79 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -366,11 +366,16 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, } /* routing header option needs extra check */ + retv = -EINVAL; if (optname == IPV6_RTHDR && opt && opt->srcrt) { struct ipv6_rt_hdr *rthdr = opt->srcrt; switch (rthdr->type) { #if defined(CONFIG_IPV6_MIP6) || defined(CONFIG_IPV6_MIP6_MODULE) case IPV6_SRCRT_TYPE_2: + if (rthdr->hdrlen != 2 || + rthdr->segments_left != 1) + goto sticky_done; + break; #endif default: From 9c0188acf6dd6990bac9cd906cd554a1476c6d12 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Wed, 12 Nov 2008 23:23:51 -0800 Subject: [PATCH 02/27] net: shy netns_ok check Failure to pass netns_ok check is SILENT, except some MIB counter is incremented somewhere. And adding "netns_ok = 1" (after long head-scratching session) is usually the last step in making some protocol netns-ready... Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller --- net/ipv4/ip_input.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/net/ipv4/ip_input.c b/net/ipv4/ip_input.c index 861978a4f1a8..cfb38ac9d698 100644 --- a/net/ipv4/ip_input.c +++ b/net/ipv4/ip_input.c @@ -209,9 +209,17 @@ static int ip_local_deliver_finish(struct sk_buff *skb) hash = protocol & (MAX_INET_PROTOS - 1); ipprot = rcu_dereference(inet_protos[hash]); - if (ipprot != NULL && (net == &init_net || ipprot->netns_ok)) { + if (ipprot != NULL) { int ret; + if (!net_eq(net, &init_net) && !ipprot->netns_ok) { + if (net_ratelimit()) + printk("%s: proto %d isn't netns-ready\n", + __func__, protocol); + kfree_skb(skb); + goto out; + } + if (!ipprot->no_policy) { if (!xfrm4_policy_check(NULL, XFRM_POLICY_IN, skb)) { kfree_skb(skb); From 1fa989e80a9a104bf3b81842a5f4c1867d7aa9c4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 12 Nov 2008 11:05:17 +0000 Subject: [PATCH 03/27] 9p: restrict RDMA usage Make 9p's RDMA option depend on INET since it uses Infiniband rdma_* functions and that code depends on INET. Otherwise 9p can try to use symbols which don't exist. ERROR: "rdma_destroy_id" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_connect" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_create_id" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_create_qp" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_resolve_route" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_disconnect" [net/9p/9pnet_rdma.ko] undefined! ERROR: "rdma_resolve_addr" [net/9p/9pnet_rdma.ko] undefined! I used an if/endif block so that the menu items would remain presented together. Also correct an article adjective. Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller --- net/9p/Kconfig | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/9p/Kconfig b/net/9p/Kconfig index c42c0c400bf9..0663f99e977a 100644 --- a/net/9p/Kconfig +++ b/net/9p/Kconfig @@ -13,22 +13,24 @@ menuconfig NET_9P If unsure, say N. +if NET_9P + config NET_9P_VIRTIO - depends on NET_9P && EXPERIMENTAL && VIRTIO + depends on EXPERIMENTAL && VIRTIO tristate "9P Virtio Transport (Experimental)" help This builds support for a transports between guest partitions and a host partition. config NET_9P_RDMA - depends on NET_9P && INFINIBAND && EXPERIMENTAL + depends on INET && INFINIBAND && EXPERIMENTAL tristate "9P RDMA Transport (Experimental)" help - This builds support for a RDMA transport. + This builds support for an RDMA transport. config NET_9P_DEBUG bool "Debug information" - depends on NET_9P help Say Y if you want the 9P subsystem to log debug information. +endif From e8f6fbf62de37cbc2e179176ac7010d5f4396b67 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 12 Nov 2008 01:38:36 +0000 Subject: [PATCH 04/27] lockdep: include/linux/lockdep.h - fix warning in net/bluetooth/af_bluetooth.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit fix this warning: net/bluetooth/af_bluetooth.c:60: warning: ‘bt_key_strings’ defined but not used net/bluetooth/af_bluetooth.c:71: warning: ‘bt_slock_key_strings’ defined but not used this is a lockdep macro problem in the !LOCKDEP case. We cannot convert it to an inline because the macro works on multiple types, but we can mark the parameter used. [ also clean up a misaligned tab in sock_lock_init_class_and_name() ] [ also remove #ifdefs from around af_family_clock_key strings - which were certainly added to get rid of the ugly build warnings. ] Signed-off-by: Ingo Molnar Signed-off-by: David S. Miller --- include/linux/lockdep.h | 5 +++-- include/net/sock.h | 2 +- net/core/sock.c | 2 -- 3 files changed, 4 insertions(+), 5 deletions(-) diff --git a/include/linux/lockdep.h b/include/linux/lockdep.h index 331e5f1c2d8e..29aec6e10020 100644 --- a/include/linux/lockdep.h +++ b/include/linux/lockdep.h @@ -331,10 +331,11 @@ static inline void lockdep_on(void) # define lock_set_subclass(l, s, i) do { } while (0) # define lockdep_init() do { } while (0) # define lockdep_info() do { } while (0) -# define lockdep_init_map(lock, name, key, sub) do { (void)(key); } while (0) +# define lockdep_init_map(lock, name, key, sub) \ + do { (void)(name); (void)(key); } while (0) # define lockdep_set_class(lock, key) do { (void)(key); } while (0) # define lockdep_set_class_and_name(lock, key, name) \ - do { (void)(key); } while (0) + do { (void)(key); (void)(name); } while (0) #define lockdep_set_class_and_subclass(lock, key, sub) \ do { (void)(key); } while (0) #define lockdep_set_subclass(lock, sub) do { } while (0) diff --git a/include/net/sock.h b/include/net/sock.h index c04f9e18ea22..2f47107f6d0f 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -815,7 +815,7 @@ static inline void sk_wmem_free_skb(struct sock *sk, struct sk_buff *skb) */ #define sock_lock_init_class_and_name(sk, sname, skey, name, key) \ do { \ - sk->sk_lock.owned = 0; \ + sk->sk_lock.owned = 0; \ init_waitqueue_head(&sk->sk_lock.wq); \ spin_lock_init(&(sk)->sk_lock.slock); \ debug_check_no_locks_freed((void *)&(sk)->sk_lock, \ diff --git a/net/core/sock.c b/net/core/sock.c index 5e2a3132a8c9..341e39456952 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -136,7 +136,6 @@ static struct lock_class_key af_family_keys[AF_MAX]; static struct lock_class_key af_family_slock_keys[AF_MAX]; -#ifdef CONFIG_DEBUG_LOCK_ALLOC /* * Make lock validator output more readable. (we pre-construct these * strings build-time, so that runtime initialization of socket @@ -187,7 +186,6 @@ static const char *af_family_clock_key_strings[AF_MAX+1] = { "clock-AF_RXRPC" , "clock-AF_ISDN" , "clock-AF_PHONET" , "clock-AF_MAX" }; -#endif /* * sk_callback_lock locking rules are per-address-family, From e3e081e1d5c4791f4416ed57b7a2f143ab9e5b09 Mon Sep 17 00:00:00 2001 From: Santwona Behera Date: Fri, 14 Nov 2008 14:44:08 -0800 Subject: [PATCH 05/27] NIU: Add Sun CP3260 ATCA blade support This patch adds support for the Sun CP3260 ATCA blade which is a N2 based ATCA blade with 2 NIU ports. The NIU ports do not have on-board PHY. Signed-off-by: Santwona Behera Signed-off-by: David S. Miller --- drivers/net/niu.c | 286 +++++++++++++++++++++++++++++++++++++++++++++- drivers/net/niu.h | 13 +++ 2 files changed, 293 insertions(+), 6 deletions(-) diff --git a/drivers/net/niu.c b/drivers/net/niu.c index d8463b1c3df3..be6b4d7e2bb4 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -406,7 +406,7 @@ static int esr2_set_rx_cfg(struct niu *np, unsigned long channel, u32 val) } /* Mode is always 10G fiber. */ -static int serdes_init_niu(struct niu *np) +static int serdes_init_niu_10g_fiber(struct niu *np) { struct niu_link_config *lp = &np->link_config; u32 tx_cfg, rx_cfg; @@ -443,6 +443,223 @@ static int serdes_init_niu(struct niu *np) return 0; } +static int serdes_init_niu_1g_serdes(struct niu *np) +{ + struct niu_link_config *lp = &np->link_config; + u16 pll_cfg, pll_sts; + int max_retry = 100; + u64 sig, mask, val; + u32 tx_cfg, rx_cfg; + unsigned long i; + int err; + + tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV | + PLL_TX_CFG_RATE_HALF); + rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT | + PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH | + PLL_RX_CFG_RATE_HALF); + + if (np->port == 0) + rx_cfg |= PLL_RX_CFG_EQ_LP_ADAPTIVE; + + if (lp->loopback_mode == LOOPBACK_PHY) { + u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS; + + mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_TEST_CFG_L, test_cfg); + + tx_cfg |= PLL_TX_CFG_ENTEST; + rx_cfg |= PLL_RX_CFG_ENTEST; + } + + /* Initialize PLL for 1G */ + pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_8X); + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_CFG_L, pll_cfg); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_1g_serdes: " + "mdio write to ESR2_TI_PLL_CFG_L failed", np->port); + return err; + } + + pll_sts = PLL_CFG_ENPLL; + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_STS_L, pll_sts); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_1g_serdes: " + "mdio write to ESR2_TI_PLL_STS_L failed", np->port); + return err; + } + + udelay(200); + + /* Initialize all 4 lanes of the SERDES. */ + for (i = 0; i < 4; i++) { + err = esr2_set_tx_cfg(np, i, tx_cfg); + if (err) + return err; + } + + for (i = 0; i < 4; i++) { + err = esr2_set_rx_cfg(np, i, rx_cfg); + if (err) + return err; + } + + switch (np->port) { + case 0: + val = (ESR_INT_SRDY0_P0 | ESR_INT_DET0_P0); + mask = val; + break; + + case 1: + val = (ESR_INT_SRDY0_P1 | ESR_INT_DET0_P1); + mask = val; + break; + + default: + return -EINVAL; + } + + while (max_retry--) { + sig = nr64(ESR_INT_SIGNALS); + if ((sig & mask) == val) + break; + + mdelay(500); + } + + if ((sig & mask) != val) { + dev_err(np->device, PFX "Port %u signal bits [%08x] are not " + "[%08x]\n", np->port, (int) (sig & mask), (int) val); + return -ENODEV; + } + + return 0; +} + +static int serdes_init_niu_10g_serdes(struct niu *np) +{ + struct niu_link_config *lp = &np->link_config; + u32 tx_cfg, rx_cfg, pll_cfg, pll_sts; + int max_retry = 100; + u64 sig, mask, val; + unsigned long i; + int err; + + tx_cfg = (PLL_TX_CFG_ENTX | PLL_TX_CFG_SWING_1375MV); + rx_cfg = (PLL_RX_CFG_ENRX | PLL_RX_CFG_TERM_0P8VDDT | + PLL_RX_CFG_ALIGN_ENA | PLL_RX_CFG_LOS_LTHRESH | + PLL_RX_CFG_EQ_LP_ADAPTIVE); + + if (lp->loopback_mode == LOOPBACK_PHY) { + u16 test_cfg = PLL_TEST_CFG_LOOPBACK_CML_DIS; + + mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_TEST_CFG_L, test_cfg); + + tx_cfg |= PLL_TX_CFG_ENTEST; + rx_cfg |= PLL_RX_CFG_ENTEST; + } + + /* Initialize PLL for 10G */ + pll_cfg = (PLL_CFG_ENPLL | PLL_CFG_MPY_10X); + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_CFG_L, pll_cfg & 0xffff); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_10g_serdes: " + "mdio write to ESR2_TI_PLL_CFG_L failed", np->port); + return err; + } + + pll_sts = PLL_CFG_ENPLL; + + err = mdio_write(np, np->port, NIU_ESR2_DEV_ADDR, + ESR2_TI_PLL_STS_L, pll_sts & 0xffff); + if (err) { + dev_err(np->device, PFX "NIU Port %d " + "serdes_init_niu_10g_serdes: " + "mdio write to ESR2_TI_PLL_STS_L failed", np->port); + return err; + } + + udelay(200); + + /* Initialize all 4 lanes of the SERDES. */ + for (i = 0; i < 4; i++) { + err = esr2_set_tx_cfg(np, i, tx_cfg); + if (err) + return err; + } + + for (i = 0; i < 4; i++) { + err = esr2_set_rx_cfg(np, i, rx_cfg); + if (err) + return err; + } + + /* check if serdes is ready */ + + switch (np->port) { + case 0: + mask = ESR_INT_SIGNALS_P0_BITS; + val = (ESR_INT_SRDY0_P0 | + ESR_INT_DET0_P0 | + ESR_INT_XSRDY_P0 | + ESR_INT_XDP_P0_CH3 | + ESR_INT_XDP_P0_CH2 | + ESR_INT_XDP_P0_CH1 | + ESR_INT_XDP_P0_CH0); + break; + + case 1: + mask = ESR_INT_SIGNALS_P1_BITS; + val = (ESR_INT_SRDY0_P1 | + ESR_INT_DET0_P1 | + ESR_INT_XSRDY_P1 | + ESR_INT_XDP_P1_CH3 | + ESR_INT_XDP_P1_CH2 | + ESR_INT_XDP_P1_CH1 | + ESR_INT_XDP_P1_CH0); + break; + + default: + return -EINVAL; + } + + while (max_retry--) { + sig = nr64(ESR_INT_SIGNALS); + if ((sig & mask) == val) + break; + + mdelay(500); + } + + if ((sig & mask) != val) { + pr_info(PFX "NIU Port %u signal bits [%08x] are not " + "[%08x] for 10G...trying 1G\n", + np->port, (int) (sig & mask), (int) val); + + /* 10G failed, try initializing at 1G */ + err = serdes_init_niu_1g_serdes(np); + if (!err) { + np->flags &= ~NIU_FLAGS_10G; + np->mac_xcvr = MAC_XCVR_PCS; + } else { + dev_err(np->device, PFX "Port %u 10G/1G SERDES " + "Link Failed \n", np->port); + return -ENODEV; + } + } + return 0; +} + static int esr_read_rxtx_ctrl(struct niu *np, unsigned long chan, u32 *val) { int err; @@ -1954,13 +2171,23 @@ static const struct niu_phy_ops phy_ops_10g_serdes = { .link_status = link_status_10g_serdes, }; +static const struct niu_phy_ops phy_ops_10g_serdes_niu = { + .serdes_init = serdes_init_niu_10g_serdes, + .link_status = link_status_10g_serdes, +}; + +static const struct niu_phy_ops phy_ops_1g_serdes_niu = { + .serdes_init = serdes_init_niu_1g_serdes, + .link_status = link_status_1g_serdes, +}; + static const struct niu_phy_ops phy_ops_1g_rgmii = { .xcvr_init = xcvr_init_1g_rgmii, .link_status = link_status_1g_rgmii, }; static const struct niu_phy_ops phy_ops_10g_fiber_niu = { - .serdes_init = serdes_init_niu, + .serdes_init = serdes_init_niu_10g_fiber, .xcvr_init = xcvr_init_10g, .link_status = link_status_10g, }; @@ -1998,11 +2225,21 @@ struct niu_phy_template { u32 phy_addr_base; }; -static const struct niu_phy_template phy_template_niu = { +static const struct niu_phy_template phy_template_niu_10g_fiber = { .ops = &phy_ops_10g_fiber_niu, .phy_addr_base = 16, }; +static const struct niu_phy_template phy_template_niu_10g_serdes = { + .ops = &phy_ops_10g_serdes_niu, + .phy_addr_base = 0, +}; + +static const struct niu_phy_template phy_template_niu_1g_serdes = { + .ops = &phy_ops_1g_serdes_niu, + .phy_addr_base = 0, +}; + static const struct niu_phy_template phy_template_10g_fiber = { .ops = &phy_ops_10g_fiber, .phy_addr_base = 8, @@ -2182,8 +2419,25 @@ static int niu_determine_phy_disposition(struct niu *np) u32 phy_addr_off = 0; if (plat_type == PLAT_TYPE_NIU) { - tp = &phy_template_niu; - phy_addr_off += np->port; + switch (np->flags & + (NIU_FLAGS_10G | + NIU_FLAGS_FIBER | + NIU_FLAGS_XCVR_SERDES)) { + case NIU_FLAGS_10G | NIU_FLAGS_XCVR_SERDES: + /* 10G Serdes */ + tp = &phy_template_niu_10g_serdes; + break; + case NIU_FLAGS_XCVR_SERDES: + /* 1G Serdes */ + tp = &phy_template_niu_1g_serdes; + break; + case NIU_FLAGS_10G | NIU_FLAGS_FIBER: + /* 10G Fiber */ + default: + tp = &phy_template_niu_10g_fiber; + phy_addr_off += np->port; + break; + } } else { switch (np->flags & (NIU_FLAGS_10G | @@ -7213,6 +7467,12 @@ static int __devinit niu_phy_type_prop_decode(struct niu *np, np->flags |= NIU_FLAGS_10G; np->flags &= ~NIU_FLAGS_FIBER; np->mac_xcvr = MAC_XCVR_XPCS; + } else if (!strcmp(phy_prop, "xgsd") || !strcmp(phy_prop, "gsd")) { + /* 10G Serdes or 1G Serdes, default to 10G */ + np->flags |= NIU_FLAGS_10G; + np->flags &= ~NIU_FLAGS_FIBER; + np->flags |= NIU_FLAGS_XCVR_SERDES; + np->mac_xcvr = MAC_XCVR_XPCS; } else { return -EINVAL; } @@ -7741,6 +8001,8 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent) u32 val; int err; + num_10g = num_1g = 0; + if (!strcmp(np->vpd.model, NIU_ALONSO_MDL_STR) || !strcmp(np->vpd.model, NIU_KIMI_MDL_STR)) { num_10g = 0; @@ -7757,6 +8019,16 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent) parent->num_ports = 2; val = (phy_encode(PORT_TYPE_10G, 0) | phy_encode(PORT_TYPE_10G, 1)); + } else if ((np->flags & NIU_FLAGS_XCVR_SERDES) && + (parent->plat_type == PLAT_TYPE_NIU)) { + /* this is the Monza case */ + if (np->flags & NIU_FLAGS_10G) { + val = (phy_encode(PORT_TYPE_10G, 0) | + phy_encode(PORT_TYPE_10G, 1)); + } else { + val = (phy_encode(PORT_TYPE_1G, 0) | + phy_encode(PORT_TYPE_1G, 1)); + } } else { err = fill_phy_probe_info(np, parent, info); if (err) @@ -8656,7 +8928,9 @@ static void __devinit niu_device_announce(struct niu *np) dev->name, (np->flags & NIU_FLAGS_XMAC ? "XMAC" : "BMAC"), (np->flags & NIU_FLAGS_10G ? "10G" : "1G"), - (np->flags & NIU_FLAGS_FIBER ? "FIBER" : "COPPER"), + (np->flags & NIU_FLAGS_FIBER ? "FIBER" : + (np->flags & NIU_FLAGS_XCVR_SERDES ? "SERDES" : + "COPPER")), (np->mac_xcvr == MAC_XCVR_MII ? "MII" : (np->mac_xcvr == MAC_XCVR_PCS ? "PCS" : "XPCS")), np->vpd.phy_type); diff --git a/drivers/net/niu.h b/drivers/net/niu.h index c6fa883daa22..180ca8ae93de 100644 --- a/drivers/net/niu.h +++ b/drivers/net/niu.h @@ -1048,6 +1048,13 @@ #define PLL_CFG_LD_SHIFT 8 #define PLL_CFG_MPY 0x0000001e #define PLL_CFG_MPY_SHIFT 1 +#define PLL_CFG_MPY_4X 0x0 +#define PLL_CFG_MPY_5X 0x00000002 +#define PLL_CFG_MPY_6X 0x00000004 +#define PLL_CFG_MPY_8X 0x00000008 +#define PLL_CFG_MPY_10X 0x0000000a +#define PLL_CFG_MPY_12X 0x0000000c +#define PLL_CFG_MPY_12P5X 0x0000000e #define PLL_CFG_ENPLL 0x00000001 #define ESR2_TI_PLL_STS_L (ESR2_BASE + 0x002) @@ -1093,6 +1100,9 @@ #define PLL_TX_CFG_INVPAIR 0x00000080 #define PLL_TX_CFG_RATE 0x00000060 #define PLL_TX_CFG_RATE_SHIFT 5 +#define PLL_TX_CFG_RATE_FULL 0x0 +#define PLL_TX_CFG_RATE_HALF 0x20 +#define PLL_TX_CFG_RATE_QUAD 0x40 #define PLL_TX_CFG_BUSWIDTH 0x0000001c #define PLL_TX_CFG_BUSWIDTH_SHIFT 2 #define PLL_TX_CFG_ENTEST 0x00000002 @@ -1132,6 +1142,9 @@ #define PLL_RX_CFG_INVPAIR 0x00000080 #define PLL_RX_CFG_RATE 0x00000060 #define PLL_RX_CFG_RATE_SHIFT 5 +#define PLL_RX_CFG_RATE_FULL 0x0 +#define PLL_RX_CFG_RATE_HALF 0x20 +#define PLL_RX_CFG_RATE_QUAD 0x40 #define PLL_RX_CFG_BUSWIDTH 0x0000001c #define PLL_RX_CFG_BUSWIDTH_SHIFT 2 #define PLL_RX_CFG_ENTEST 0x00000002 From d8c3e23d06c1020f38b7b6290135a9522a2e3052 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 14 Nov 2008 14:47:29 -0800 Subject: [PATCH 06/27] niu: Bump driver version and release date. This driver is pretty mature, and the worst of the known problems has been fixed (the 32-bit failures due to readq implementation). So let's finally give it a version of 1.0 Signed-off-by: David S. Miller --- drivers/net/niu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/niu.c b/drivers/net/niu.c index be6b4d7e2bb4..1b6f548c4411 100644 --- a/drivers/net/niu.c +++ b/drivers/net/niu.c @@ -33,8 +33,8 @@ #define DRV_MODULE_NAME "niu" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "0.9" -#define DRV_MODULE_RELDATE "May 4, 2008" +#define DRV_MODULE_VERSION "1.0" +#define DRV_MODULE_RELDATE "Nov 14, 2008" static char version[] __devinitdata = DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; From 5421ae0153b4ba0469967cfd8de96144e3bf3979 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Fri, 14 Nov 2008 14:51:45 -0800 Subject: [PATCH 07/27] scm: fix scm_fp_list->list initialization made in wrong place This is the next page of the scm recursion story (the commit f8d570a4 net: Fix recursive descent in __scm_destroy()). In function scm_fp_dup(), the INIT_LIST_HEAD(&fpl->list) of newly created fpl is done *before* the subsequent memcpy from the old structure and thus the freshly initialized list is overwritten. But that's OK, since this initialization is not required at all, since the fpl->list is list_add-ed at the destruction time in any case (and is unused in other code), so I propose to drop both initializations, rather than moving it after the memcpy. Please, correct me if I miss something significant. Signed-off-by: Pavel Emelyanov Signed-off-by: David S. Miller --- net/core/scm.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/net/core/scm.c b/net/core/scm.c index ab242cc1acca..b12303dd39d9 100644 --- a/net/core/scm.c +++ b/net/core/scm.c @@ -75,7 +75,6 @@ static int scm_fp_copy(struct cmsghdr *cmsg, struct scm_fp_list **fplp) if (!fpl) return -ENOMEM; *fplp = fpl; - INIT_LIST_HEAD(&fpl->list); fpl->count = 0; } fpp = &fpl->fp[fpl->count]; @@ -301,7 +300,6 @@ struct scm_fp_list *scm_fp_dup(struct scm_fp_list *fpl) new_fpl = kmalloc(sizeof(*fpl), GFP_KERNEL); if (new_fpl) { - INIT_LIST_HEAD(&new_fpl->list); for (i=fpl->count-1; i>=0; i--) get_file(fpl->fp[i]); memcpy(new_fpl, fpl, sizeof(*fpl)); From 18acfa2597d57c19249346d130fc3334244557b4 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 13 Nov 2008 21:26:27 +0300 Subject: [PATCH 08/27] net/ucc_geth: Fix oops in uec_get_ethtool_stats() p_{tx,rx}_fw_statistics_pram are special: they're available only when a device is open. If the device is closed, we should just fill the data with zeroes. Fixes the following oops: root@b1:~# ifconfig eth1 down root@b1:~# ethtool -S eth1 Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc01e1dcc Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c01e1dcc] uec_get_ethtool_stats+0x98/0x124 LR [c0287cc8] ethtool_get_stats+0xfc/0x23c Call Trace: [cfaadde0] [c0287ca8] ethtool_get_stats+0xdc/0x23c (unreliable) [cfaade20] [c0288340] dev_ethtool+0x2fc/0x588 [cfaade50] [c0285648] dev_ioctl+0x290/0x33c [cfaadea0] [c0272238] sock_ioctl+0x80/0x2ec [cfaadec0] [c00b5ae4] vfs_ioctl+0x40/0xc0 [cfaadee0] [c00b5fa8] do_vfs_ioctl+0x78/0x20c [cfaadf10] [c00b617c] sys_ioctl+0x40/0x74 [cfaadf40] [c00142d8] ret_from_syscall+0x0/0x38 [...] ---[ end trace b941007b2dfb9759 ]--- Segmentation fault p.s. While at it, also remove u64 casts, they aren't needed. Signed-off-by: Anton Vorontsov Signed-off-by: Jeff Garzik --- drivers/net/ucc_geth_ethtool.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index 85f38a6b6a49..68a7f5414133 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -323,17 +323,17 @@ static void uec_get_ethtool_stats(struct net_device *netdev, if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_HARDWARE) { base = (u32 __iomem *)&ugeth->ug_regs->tx64; for (i = 0; i < UEC_HW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = in_be32(&base[i]); } if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_TX) { base = (u32 __iomem *)ugeth->p_tx_fw_statistics_pram; for (i = 0; i < UEC_TX_FW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = base ? in_be32(&base[i]) : 0; } if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX) { base = (u32 __iomem *)ugeth->p_rx_fw_statistics_pram; for (i = 0; i < UEC_RX_FW_STATS_LEN; i++) - data[j++] = (u64)in_be32(&base[i]); + data[j++] = base ? in_be32(&base[i]) : 0; } } From 81183059e89c36f9b4c41f9332d642c2e0bff971 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Wed, 12 Nov 2008 10:07:11 -0600 Subject: [PATCH 09/27] gianfar: Fix DMA unmap invocations We weren't unmapping DMA memory, which will break when gianfar gets used on systems with more than 32-bits of memory. Also, it's just plain wrong. Signed-off-by: Andy Fleming Signed-off-by: Jeff Garzik --- drivers/net/gianfar.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index 83a5cb6aa23b..c4af949bf860 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1407,6 +1407,10 @@ static int gfar_clean_tx_ring(struct net_device *dev) if (bdp->status & TXBD_DEF) dev->stats.collisions++; + /* Unmap the DMA memory */ + dma_unmap_single(&priv->dev->dev, bdp->bufPtr, + bdp->length, DMA_TO_DEVICE); + /* Free the sk buffer associated with this TxBD */ dev_kfree_skb_irq(priv->tx_skbuff[priv->skb_dirtytx]); @@ -1666,6 +1670,9 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) skb = priv->rx_skbuff[priv->skb_currx]; + dma_unmap_single(&priv->dev->dev, bdp->bufPtr, + priv->rx_buffer_size, DMA_FROM_DEVICE); + /* We drop the frame if we failed to allocate a new buffer */ if (unlikely(!newskb || !(bdp->status & RXBD_LAST) || bdp->status & RXBD_ERR)) { @@ -1674,14 +1681,8 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit) if (unlikely(!newskb)) newskb = skb; - if (skb) { - dma_unmap_single(&priv->dev->dev, - bdp->bufPtr, - priv->rx_buffer_size, - DMA_FROM_DEVICE); - + if (skb) dev_kfree_skb_any(skb); - } } else { /* Increment the number of packets */ dev->stats.rx_packets++; From 7ee0fddfe05f105d3346aa8774695e7130697836 Mon Sep 17 00:00:00 2001 From: "J. K. Cliburn" Date: Tue, 11 Nov 2008 16:21:48 -0600 Subject: [PATCH 10/27] atl1e: fix broken multicast by removing unnecessary crc inversion Inverting the crc after calling ether_crc_le() is unnecessary and breaks multicast. Remove it. Tested-by: David Madore Signed-off-by: Jay Cliburn Cc: stable@kernel.org Signed-off-by: Jeff Garzik --- drivers/net/atl1e/atl1e_hw.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/atl1e/atl1e_hw.c b/drivers/net/atl1e/atl1e_hw.c index 8cbc1b59bd62..4a7700620119 100644 --- a/drivers/net/atl1e/atl1e_hw.c +++ b/drivers/net/atl1e/atl1e_hw.c @@ -163,9 +163,6 @@ int atl1e_read_mac_addr(struct atl1e_hw *hw) * atl1e_hash_mc_addr * purpose * set hash value for a multicast address - * hash calcu processing : - * 1. calcu 32bit CRC for multicast address - * 2. reverse crc with MSB to LSB */ u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr) { @@ -174,7 +171,6 @@ u32 atl1e_hash_mc_addr(struct atl1e_hw *hw, u8 *mc_addr) int i; crc32 = ether_crc_le(6, mc_addr); - crc32 = ~crc32; for (i = 0; i < 32; i++) value |= (((crc32 >> i) & 1) << (31 - i)); From 3b259e365998291a02488225e32b9f2b73723b3e Mon Sep 17 00:00:00 2001 From: "J. K. Cliburn" Date: Sun, 9 Nov 2008 15:05:30 -0600 Subject: [PATCH 11/27] atl1: Do not enumerate options unsupported by chip Of the various WOL options provided in include/linux/ethtool.h, the L1 NIC supports only magic packet. Remove all options except magic packet from the atl1 driver. Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik --- drivers/net/atlx/atl1.c | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 246d92b42636..aef403d299ee 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -3404,14 +3404,8 @@ static void atl1_get_wol(struct net_device *netdev, { struct atl1_adapter *adapter = netdev_priv(netdev); - wol->supported = WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | WAKE_MAGIC; + wol->supported = WAKE_MAGIC; wol->wolopts = 0; - if (adapter->wol & ATLX_WUFC_EX) - wol->wolopts |= WAKE_UCAST; - if (adapter->wol & ATLX_WUFC_MC) - wol->wolopts |= WAKE_MCAST; - if (adapter->wol & ATLX_WUFC_BC) - wol->wolopts |= WAKE_BCAST; if (adapter->wol & ATLX_WUFC_MAG) wol->wolopts |= WAKE_MAGIC; return; @@ -3422,15 +3416,10 @@ static int atl1_set_wol(struct net_device *netdev, { struct atl1_adapter *adapter = netdev_priv(netdev); - if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + if (wol->wolopts & (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST | + WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; adapter->wol = 0; - if (wol->wolopts & WAKE_UCAST) - adapter->wol |= ATLX_WUFC_EX; - if (wol->wolopts & WAKE_MCAST) - adapter->wol |= ATLX_WUFC_MC; - if (wol->wolopts & WAKE_BCAST) - adapter->wol |= ATLX_WUFC_BC; if (wol->wolopts & WAKE_MAGIC) adapter->wol |= ATLX_WUFC_MAG; return 0; From 3e44017b589f001941723dfdfede2ca6284dddce Mon Sep 17 00:00:00 2001 From: Lennert Buytenhek Date: Sun, 9 Nov 2008 05:34:47 +0100 Subject: [PATCH 12/27] phylib: fix premature freeing of struct mii_bus Commit 46abc02175b3c246dd5141d878f565a8725060c9 ("phylib: give mdio buses a device tree presence") added a call to device_unregister() in a situation where the caller did not intend for the device to be freed yet, but apart from just unregistering the device from the system, device_unregister() does an additional put_device() that is intended to free it. The right function to use in this situation is device_del(), which unregisters the device from the system like device_unregister() does, but without dropping the reference count an additional time. Bug report from Bryan Wu . Signed-off-by: Lennert Buytenhek Tested-by: Bryan Wu Signed-off-by: Jeff Garzik --- drivers/net/phy/mdio_bus.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index d0ed1ef284a8..536bda1f428b 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -136,7 +136,7 @@ void mdiobus_unregister(struct mii_bus *bus) BUG_ON(bus->state != MDIOBUS_REGISTERED); bus->state = MDIOBUS_UNREGISTERED; - device_unregister(&bus->dev); + device_del(&bus->dev); for (i = 0; i < PHY_MAX_ADDR; i++) { if (bus->phy_map[i]) device_unregister(&bus->phy_map[i]->dev); From d53b93f2603554c3420e301bd13ee2c354a15ceb Mon Sep 17 00:00:00 2001 From: Yevgeny Petrilin Date: Wed, 5 Nov 2008 04:48:36 +0000 Subject: [PATCH 13/27] mlx4_en: Pause parameters per port Before the change the driver reported the same pause parameters for all the ports, even only one of them was modified. Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller --- drivers/net/mlx4/en_netdev.c | 8 ++++---- drivers/net/mlx4/en_params.c | 30 ++++++++++++++++-------------- drivers/net/mlx4/mlx4_en.h | 8 ++++---- 3 files changed, 24 insertions(+), 22 deletions(-) diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c index a3f732418c49..96e709d6440a 100644 --- a/drivers/net/mlx4/en_netdev.c +++ b/drivers/net/mlx4/en_netdev.c @@ -656,10 +656,10 @@ static int mlx4_en_start_port(struct net_device *dev) /* Configure port */ err = mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - mdev->profile.tx_pause, - mdev->profile.tx_ppp, - mdev->profile.rx_pause, - mdev->profile.rx_ppp); + priv->prof->tx_pause, + priv->prof->tx_ppp, + priv->prof->rx_pause, + priv->prof->rx_ppp); if (err) { mlx4_err(mdev, "Failed setting port general configurations" " for port %d, with error %d\n", priv->port, err); diff --git a/drivers/net/mlx4/en_params.c b/drivers/net/mlx4/en_params.c index c2e69b1bcd0a..95706ee1c019 100644 --- a/drivers/net/mlx4/en_params.c +++ b/drivers/net/mlx4/en_params.c @@ -90,6 +90,7 @@ MLX4_EN_PARM_INT(rx_ring_size2, MLX4_EN_AUTO_CONF, "Rx ring size for port 2"); int mlx4_en_get_profile(struct mlx4_en_dev *mdev) { struct mlx4_en_profile *params = &mdev->profile; + int i; params->rx_moder_cnt = min_t(int, rx_moder_cnt, MLX4_EN_AUTO_CONF); params->rx_moder_time = min_t(int, rx_moder_time, MLX4_EN_AUTO_CONF); @@ -97,11 +98,13 @@ int mlx4_en_get_profile(struct mlx4_en_dev *mdev) params->rss_xor = (rss_xor != 0); params->rss_mask = rss_mask & 0x1f; params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS); - params->rx_pause = pprx; - params->rx_ppp = pfcrx; - params->tx_pause = pptx; - params->tx_ppp = pfctx; - if (params->rx_ppp || params->tx_ppp) { + for (i = 1; i <= MLX4_MAX_PORTS; i++) { + params->prof[i].rx_pause = pprx; + params->prof[i].rx_ppp = pfcrx; + params->prof[i].tx_pause = pptx; + params->prof[i].tx_ppp = pfctx; + } + if (pfcrx || pfctx) { params->prof[1].tx_ring_num = MLX4_EN_TX_RING_NUM; params->prof[2].tx_ring_num = MLX4_EN_TX_RING_NUM; } else { @@ -407,14 +410,14 @@ static int mlx4_en_set_pauseparam(struct net_device *dev, struct mlx4_en_dev *mdev = priv->mdev; int err; - mdev->profile.tx_pause = pause->tx_pause != 0; - mdev->profile.rx_pause = pause->rx_pause != 0; + priv->prof->tx_pause = pause->tx_pause != 0; + priv->prof->rx_pause = pause->rx_pause != 0; err = mlx4_SET_PORT_general(mdev->dev, priv->port, priv->rx_skb_size + ETH_FCS_LEN, - mdev->profile.tx_pause, - mdev->profile.tx_ppp, - mdev->profile.rx_pause, - mdev->profile.rx_ppp); + priv->prof->tx_pause, + priv->prof->tx_ppp, + priv->prof->rx_pause, + priv->prof->rx_ppp); if (err) mlx4_err(mdev, "Failed setting pause params to\n"); @@ -425,10 +428,9 @@ static void mlx4_en_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *pause) { struct mlx4_en_priv *priv = netdev_priv(dev); - struct mlx4_en_dev *mdev = priv->mdev; - pause->tx_pause = mdev->profile.tx_pause; - pause->rx_pause = mdev->profile.rx_pause; + pause->tx_pause = priv->prof->tx_pause; + pause->rx_pause = priv->prof->rx_pause; } static void mlx4_en_get_ringparam(struct net_device *dev, diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h index 11fb17c6e97b..98ddc0811f93 100644 --- a/drivers/net/mlx4/mlx4_en.h +++ b/drivers/net/mlx4/mlx4_en.h @@ -322,6 +322,10 @@ struct mlx4_en_port_profile { u32 rx_ring_num; u32 tx_ring_size; u32 rx_ring_size; + u8 rx_pause; + u8 rx_ppp; + u8 tx_pause; + u8 tx_ppp; }; struct mlx4_en_profile { @@ -333,10 +337,6 @@ struct mlx4_en_profile { int rx_moder_cnt; int rx_moder_time; int auto_moder; - u8 rx_pause; - u8 rx_ppp; - u8 tx_pause; - u8 tx_ppp; u8 no_reset; struct mlx4_en_port_profile prof[MLX4_MAX_PORTS + 1]; }; From 605f196efbf8dcbb3581e76ddd0573899dffcf1f Mon Sep 17 00:00:00 2001 From: Ron Madrid Date: Thu, 6 Nov 2008 09:05:26 +0000 Subject: [PATCH 14/27] phy: Add support for Marvell 88E1118 PHY This patch will add support for the Marvell 88E1118 PHY which supports gigabit ethernet among other things. Signed-off-by: Ron Madrid Signed-off-by: David S. Miller --- drivers/net/phy/marvell.c | 66 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 66 insertions(+) diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 4aa547947040..eb6411c4694f 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -227,6 +227,59 @@ static int m88e1111_config_init(struct phy_device *phydev) return 0; } +static int m88e1118_config_aneg(struct phy_device *phydev) +{ + int err; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + err = phy_write(phydev, MII_M1011_PHY_SCR, + MII_M1011_PHY_SCR_AUTO_CROSS); + if (err < 0) + return err; + + err = genphy_config_aneg(phydev); + return 0; +} + +static int m88e1118_config_init(struct phy_device *phydev) +{ + int err; + + /* Change address */ + err = phy_write(phydev, 0x16, 0x0002); + if (err < 0) + return err; + + /* Enable 1000 Mbit */ + err = phy_write(phydev, 0x15, 0x1070); + if (err < 0) + return err; + + /* Change address */ + err = phy_write(phydev, 0x16, 0x0003); + if (err < 0) + return err; + + /* Adjust LED Control */ + err = phy_write(phydev, 0x10, 0x021e); + if (err < 0) + return err; + + /* Reset address */ + err = phy_write(phydev, 0x16, 0x0); + if (err < 0) + return err; + + err = phy_write(phydev, MII_BMCR, BMCR_RESET); + if (err < 0) + return err; + + return 0; +} + static int m88e1145_config_init(struct phy_device *phydev) { int err; @@ -415,6 +468,19 @@ static struct phy_driver marvell_drivers[] = { .config_intr = &marvell_config_intr, .driver = { .owner = THIS_MODULE }, }, + { + .phy_id = 0x01410e10, + .phy_id_mask = 0xfffffff0, + .name = "Marvell 88E1118", + .features = PHY_GBIT_FEATURES, + .flags = PHY_HAS_INTERRUPT, + .config_init = &m88e1118_config_init, + .config_aneg = &m88e1118_config_aneg, + .read_status = &genphy_read_status, + .ack_interrupt = &marvell_ack_interrupt, + .config_intr = &marvell_config_intr, + .driver = {.owner = THIS_MODULE,}, + }, { .phy_id = 0x01410cd0, .phy_id_mask = 0xfffffff0, From 5f5c4bdb144bf285727867bbd75c13c5a99150c9 Mon Sep 17 00:00:00 2001 From: Joey Zhuo Date: Sun, 16 Nov 2008 00:39:35 -0800 Subject: [PATCH 15/27] via-velocity: enable perfect filtering for multicast packets Signed-off-by: Joey Zhuo Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/via-velocity.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index 3590ea5a902d..11cb3e504e1c 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -2296,7 +2296,7 @@ static void velocity_set_multi(struct net_device *dev) } mac_set_cam_mask(regs, vptr->mCAMmask); - rx_mode = (RCR_AM | RCR_AB); + rx_mode = RCR_AM | RCR_AB | RCR_AP; } if (dev->mtu > 1500) rx_mode |= RCR_AL; From 6ff68026f4757d68461b7fbeca5c944e1f5f8b44 Mon Sep 17 00:00:00 2001 From: "\\\"Rafael J. Wysocki\\" Date: Wed, 12 Nov 2008 09:52:32 +0000 Subject: [PATCH 16/27] e1000e: Use device_set_wakeup_enable Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using e1000_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ethtool.c | 8 ++++++-- drivers/net/e1000e/netdev.c | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000e/ethtool.c b/drivers/net/e1000e/ethtool.c index 70c11c811a08..62421ce96311 100644 --- a/drivers/net/e1000e/ethtool.c +++ b/drivers/net/e1000e/ethtool.c @@ -1713,7 +1713,8 @@ static void e1000_get_wol(struct net_device *netdev, wol->supported = 0; wol->wolopts = 0; - if (!(adapter->flags & FLAG_HAS_WOL)) + if (!(adapter->flags & FLAG_HAS_WOL) || + !device_can_wakeup(&adapter->pdev->dev)) return; wol->supported = WAKE_UCAST | WAKE_MCAST | @@ -1751,7 +1752,8 @@ static int e1000_set_wol(struct net_device *netdev, if (wol->wolopts & WAKE_MAGICSECURE) return -EOPNOTSUPP; - if (!(adapter->flags & FLAG_HAS_WOL)) + if (!(adapter->flags & FLAG_HAS_WOL) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; /* these settings will always override what we currently have */ @@ -1770,6 +1772,8 @@ static int e1000_set_wol(struct net_device *netdev, if (wol->wolopts & WAKE_ARP) adapter->wol |= E1000_WUFC_ARP; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index abd492b7336d..2c8dffdc889f 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4970,6 +4970,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* reset the hardware with the new settings */ e1000e_reset(adapter); From de1264896c8012a261c1cba17e6a61199c276ad3 Mon Sep 17 00:00:00 2001 From: "\\\"Rafael J. Wysocki\\" Date: Fri, 7 Nov 2008 20:30:19 +0000 Subject: [PATCH 17/27] e1000: Use device_set_wakeup_enable Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using e1000_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000/e1000_ethtool.c | 8 ++++++-- drivers/net/e1000/e1000_main.c | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 6a3893acfe04..c854c96f5ab3 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1774,7 +1774,8 @@ static void e1000_get_wol(struct net_device *netdev, /* this function will set ->supported = 0 and return 1 if wol is not * supported by this hardware */ - if (e1000_wol_exclusion(adapter, wol)) + if (e1000_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return; /* apply any specific unsupported masks here */ @@ -1811,7 +1812,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; - if (e1000_wol_exclusion(adapter, wol)) + if (e1000_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; switch (hw->device_id) { @@ -1838,6 +1840,8 @@ static int e1000_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & WAKE_MAGIC) adapter->wol |= E1000_WUFC_MAG; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index fac82152e4c8..872799b746f5 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1179,6 +1179,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* print bus type/speed/width info */ DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ", From e1b86d8479f90aadee57a3d07d8e61c815c202d9 Mon Sep 17 00:00:00 2001 From: "\\\"Rafael J. Wysocki\\" Date: Fri, 7 Nov 2008 20:30:37 +0000 Subject: [PATCH 18/27] igb: Use device_set_wakeup_enable Since dev->power.should_wakeup bit is used by the PCI core to decide whether the device should wake up the system from sleep states, set/unset this bit whenever WOL is enabled/disabled using igb_set_wol(). Accordingly, use device_can_wakeup() for checking if wake-up is supported by the device. Signed-off-by: "Rafael J. Wysocki" Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/igb/igb_ethtool.c | 8 ++++++-- drivers/net/igb/igb_main.c | 1 + 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c index 58906c984be9..89964fa739a0 100644 --- a/drivers/net/igb/igb_ethtool.c +++ b/drivers/net/igb/igb_ethtool.c @@ -1776,7 +1776,8 @@ static void igb_get_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) /* this function will set ->supported = 0 and return 1 if wol is not * supported by this hardware */ - if (igb_wol_exclusion(adapter, wol)) + if (igb_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return; /* apply any specific unsupported masks here */ @@ -1805,7 +1806,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) return -EOPNOTSUPP; - if (igb_wol_exclusion(adapter, wol)) + if (igb_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) return wol->wolopts ? -EOPNOTSUPP : 0; switch (hw->device_id) { @@ -1825,6 +1827,8 @@ static int igb_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) if (wol->wolopts & WAKE_MAGIC) adapter->wol |= E1000_WUFC_MAG; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + return 0; } diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 1f397cd99414..0a9801516ae0 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1244,6 +1244,7 @@ static int __devinit igb_probe(struct pci_dev *pdev, /* initialize the wol settings based on the eeprom settings */ adapter->wol = adapter->eeprom_wol; + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); /* reset the hardware with the new settings */ igb_reset(adapter); From 0f807044980dd51fdf9aa2df8d503d4757501b20 Mon Sep 17 00:00:00 2001 From: Ron Mercer Date: Tue, 11 Nov 2008 07:54:54 +0000 Subject: [PATCH 19/27] qla3xxx: Cleanup: Fix link print statements. Removed debug print statements and improved conditionals around informational statements. Signed-off-by: Ron Mercer Signed-off-by: David S. Miller --- drivers/net/qla3xxx.c | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index 3cdd07c45b6d..508452c02151 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -1515,9 +1515,6 @@ static u32 ql_get_link_state(struct ql3_adapter *qdev) linkState = LS_UP; } else { linkState = LS_DOWN; - if (netif_msg_link(qdev)) - printk(KERN_WARNING PFX - "%s: Link is down.\n", qdev->ndev->name); } return linkState; } @@ -1581,10 +1578,6 @@ static int ql_finish_auto_neg(struct ql3_adapter *qdev) ql_mac_enable(qdev, 1); } - if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: Change port_link_state LS_DOWN to LS_UP.\n", - qdev->ndev->name); qdev->port_link_state = LS_UP; netif_start_queue(qdev->ndev); netif_carrier_on(qdev->ndev); @@ -1655,14 +1648,9 @@ static void ql_link_state_machine_work(struct work_struct *work) /* Fall Through */ case LS_DOWN: - if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: port_link_state = LS_DOWN.\n", - qdev->ndev->name); if (curr_link_state == LS_UP) { if (netif_msg_link(qdev)) - printk(KERN_DEBUG PFX - "%s: curr_link_state = LS_UP.\n", + printk(KERN_INFO PFX "%s: Link is up.\n", qdev->ndev->name); if (ql_is_auto_neg_complete(qdev)) ql_finish_auto_neg(qdev); @@ -1670,6 +1658,7 @@ static void ql_link_state_machine_work(struct work_struct *work) if (qdev->port_link_state == LS_UP) ql_link_down_detect_clear(qdev); + qdev->port_link_state = LS_UP; } break; @@ -1678,12 +1667,14 @@ static void ql_link_state_machine_work(struct work_struct *work) * See if the link is currently down or went down and came * back up */ - if ((curr_link_state == LS_DOWN) || ql_link_down_detect(qdev)) { + if (curr_link_state == LS_DOWN) { if (netif_msg_link(qdev)) printk(KERN_INFO PFX "%s: Link is down.\n", qdev->ndev->name); qdev->port_link_state = LS_DOWN; } + if (ql_link_down_detect(qdev)) + qdev->port_link_state = LS_DOWN; break; } spin_unlock_irqrestore(&qdev->hw_lock, hw_flags); From ac450208dea8cf1b9aa8feabd06a7209a282d749 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 13 Nov 2008 06:20:10 +0000 Subject: [PATCH 20/27] igb: use dev_printk instead of printk Use dev_printk() instead of printk() to give a little more context and use consistent format. Signed-off-by: Bjorn Helgaas Signed-off-by: David S. Miller --- drivers/net/igb/igb_main.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index 0a9801516ae0..1cbae85b1426 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -1019,10 +1019,9 @@ static int __devinit igb_probe(struct pci_dev *pdev, state &= ~PCIE_LINK_STATE_L0S; pci_write_config_word(us_dev, pos + PCI_EXP_LNKCTL, state); - printk(KERN_INFO "Disabling ASPM L0s upstream switch " - "port %x:%x.%x\n", us_dev->bus->number, - PCI_SLOT(us_dev->devfn), - PCI_FUNC(us_dev->devfn)); + dev_info(&pdev->dev, + "Disabling ASPM L0s upstream switch port %s\n", + pci_name(us_dev)); } default: break; From 773c9c1f77174429ad2feb1735a3beb33ff3b6c0 Mon Sep 17 00:00:00 2001 From: Jesse Brandeburg Date: Fri, 14 Nov 2008 13:51:54 +0000 Subject: [PATCH 21/27] e100: fix dma error in direction for mapping The e100 driver triggers BUG_ON(buf->direction != dir) by doing pci_map_single(..., PCI_DMA_BIDIRECTIONAL) and pci_dma_sync_single_for_device(..., PCI_DMA_TODEVICE). Changing the DMA direction, especially with dmabounce will result in unexpected behaviour. Reported-by: Anders Grafstrom Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e100.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 3d69fae781cf..e8bfcce6b319 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -166,7 +166,7 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.5.23-k4"DRV_EXT +#define DRV_VERSION "3.5.23-k6"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" #define DRV_COPYRIGHT "Copyright(c) 1999-2006 Intel Corporation" #define PFX DRV_NAME ": " @@ -1804,7 +1804,7 @@ static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx) struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data; put_unaligned_le32(rx->dma_addr, &prev_rfd->link); pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr, - sizeof(struct rfd), PCI_DMA_TODEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); } return 0; @@ -1823,7 +1823,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, /* Need to sync before taking a peek at cb_complete bit */ pci_dma_sync_single_for_cpu(nic->pdev, rx->dma_addr, - sizeof(struct rfd), PCI_DMA_FROMDEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); rfd_status = le16_to_cpu(rfd->status); DPRINTK(RX_STATUS, DEBUG, "status=0x%04X\n", rfd_status); @@ -1850,7 +1850,7 @@ static int e100_rx_indicate(struct nic *nic, struct rx *rx, /* Get data */ pci_unmap_single(nic->pdev, rx->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); /* If this buffer has the el bit, but we think the receiver * is still running, check to see if it really stopped while @@ -1943,7 +1943,7 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done, new_before_last_rfd->command |= cpu_to_le16(cb_el); pci_dma_sync_single_for_device(nic->pdev, new_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); /* Now that we have a new stopping point, we can clear the old * stopping point. We must sync twice to get the proper @@ -1951,11 +1951,11 @@ static void e100_rx_clean(struct nic *nic, unsigned int *work_done, old_before_last_rfd->command &= ~cpu_to_le16(cb_el); pci_dma_sync_single_for_device(nic->pdev, old_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); old_before_last_rfd->size = cpu_to_le16(VLAN_ETH_FRAME_LEN); pci_dma_sync_single_for_device(nic->pdev, old_before_last_rx->dma_addr, sizeof(struct rfd), - PCI_DMA_TODEVICE); + PCI_DMA_BIDIRECTIONAL); } if(restart_required) { @@ -1978,7 +1978,7 @@ static void e100_rx_clean_list(struct nic *nic) for(rx = nic->rxs, i = 0; i < count; rx++, i++) { if(rx->skb) { pci_unmap_single(nic->pdev, rx->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); dev_kfree_skb(rx->skb); } } @@ -2021,7 +2021,7 @@ static int e100_rx_alloc_list(struct nic *nic) before_last->command |= cpu_to_le16(cb_el); before_last->size = 0; pci_dma_sync_single_for_device(nic->pdev, rx->dma_addr, - sizeof(struct rfd), PCI_DMA_TODEVICE); + sizeof(struct rfd), PCI_DMA_BIDIRECTIONAL); nic->rx_to_use = nic->rx_to_clean = nic->rxs; nic->ru_running = RU_SUSPENDED; @@ -2222,7 +2222,7 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode) msleep(10); pci_dma_sync_single_for_cpu(nic->pdev, nic->rx_to_clean->dma_addr, - RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); if(memcmp(nic->rx_to_clean->skb->data + sizeof(struct rfd), skb->data, ETH_DATA_LEN)) From 3ee82383f0098a2e13acc8cf1be8e47512f41e5a Mon Sep 17 00:00:00 2001 From: Giulio Benetti Date: Thu, 13 Nov 2008 21:53:13 +0000 Subject: [PATCH 22/27] phy: fix phy address bug PHYID returns 0xffff and not 0xffffffff when not found and in some case(at91sam9263) 0x0. Maybe this patch could be useful. Signed-off-by: Giulio Benetti Signed-off-by: David S. Miller --- drivers/net/phy/phy_device.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index e11b03b2b25a..8fb1faca883a 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -227,8 +227,8 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) if (r) return ERR_PTR(r); - /* If the phy_id is all Fs, there is no device there */ - if (0xffffffff == phy_id) + /* If the phy_id is all Fs or all 0s, there is no device there */ + if ((0xffff == phy_id) || (0x00 == phy_id)) return NULL; dev = phy_device_create(bus, addr, phy_id); From e82f54ba030b429c06b5240cbe7eeaaa03a8db11 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 14 Nov 2008 06:45:07 +0000 Subject: [PATCH 23/27] e1000e: fix warn_on reload after phy_id error If the driver fails to initialize the first time due to the failure in the phy_id check the kernel triggers a warn_on on the second try to load the driver because the driver did not free the msi/x resources in the first load because of the previous failure in phy_id check. Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/netdev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 2c8dffdc889f..f6ebebb8cfa5 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -5009,6 +5009,7 @@ err_hw_init: err_sw_init: if (adapter->hw.flash_address) iounmap(adapter->hw.flash_address); + e1000e_reset_interrupt_capability(adapter); err_flashmap: iounmap(adapter->hw.hw_addr); err_ioremap: From eb7c3adb1ca92450870dbb0d347fc986cd5e2af4 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Fri, 14 Nov 2008 06:45:23 +0000 Subject: [PATCH 24/27] e1000e: fix IPMI traffic Some users reported that they have machines with BMCs enabled that cannot receive IPMI traffic after e1000e is loaded. http://marc.info/?l=e1000-devel&m=121909039127414&w=2 http://marc.info/?l=e1000-devel&m=121365543823387&w=2 This fixes the issue if they load with the new parameter = 0 by disabling crc stripping, but leaves the performance feature on for most users. Based on work done by Hong Zhang. Signed-off-by: Jeff Kirsher Signed-off-by: Jesse Brandeburg Signed-off-by: David S. Miller --- drivers/net/e1000e/e1000.h | 5 +++++ drivers/net/e1000e/netdev.c | 23 +++++++++++++++++++++-- drivers/net/e1000e/param.c | 25 +++++++++++++++++++++++++ 3 files changed, 51 insertions(+), 2 deletions(-) diff --git a/drivers/net/e1000e/e1000.h b/drivers/net/e1000e/e1000.h index c55de1c027af..c55fd6fdb91c 100644 --- a/drivers/net/e1000e/e1000.h +++ b/drivers/net/e1000e/e1000.h @@ -299,6 +299,7 @@ struct e1000_adapter { unsigned long led_status; unsigned int flags; + unsigned int flags2; struct work_struct downshift_task; struct work_struct update_phy_task; }; @@ -306,6 +307,7 @@ struct e1000_adapter { struct e1000_info { enum e1000_mac_type mac; unsigned int flags; + unsigned int flags2; u32 pba; s32 (*get_variants)(struct e1000_adapter *); struct e1000_mac_operations *mac_ops; @@ -347,6 +349,9 @@ struct e1000_info { #define FLAG_RX_RESTART_NOW (1 << 30) #define FLAG_MSI_TEST_FAILED (1 << 31) +/* CRC Stripping defines */ +#define FLAG2_CRC_STRIPPING (1 << 0) + #define E1000_RX_DESC_PS(R, i) \ (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) #define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i])) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index f6ebebb8cfa5..91795f78c3e4 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -499,6 +499,10 @@ static bool e1000_clean_rx_irq(struct e1000_adapter *adapter, goto next_desc; } + /* adjust length to remove Ethernet CRC */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + length -= 4; + total_rx_bytes += length; total_rx_packets++; @@ -804,6 +808,10 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, pci_dma_sync_single_for_device(pdev, ps_page->dma, PAGE_SIZE, PCI_DMA_FROMDEVICE); + /* remove the CRC */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + l1 -= 4; + skb_put(skb, l1); goto copydone; } /* if */ @@ -825,6 +833,12 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, skb->truesize += length; } + /* strip the ethernet crc, problem is we're using pages now so + * this whole operation can get a little cpu intensive + */ + if (!(adapter->flags2 & FLAG2_CRC_STRIPPING)) + pskb_trim(skb, skb->len - 4); + copydone: total_rx_bytes += skb->len; total_rx_packets++; @@ -2301,8 +2315,12 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) else rctl |= E1000_RCTL_LPE; - /* Enable hardware CRC frame stripping */ - rctl |= E1000_RCTL_SECRC; + /* Some systems expect that the CRC is included in SMBUS traffic. The + * hardware strips the CRC before sending to both SMBUS (BMC) and to + * host memory when this is enabled + */ + if (adapter->flags2 & FLAG2_CRC_STRIPPING) + rctl |= E1000_RCTL_SECRC; /* Setup buffer sizes */ rctl &= ~E1000_RCTL_SZ_4096; @@ -4766,6 +4784,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev, adapter->ei = ei; adapter->pba = ei->pba; adapter->flags = ei->flags; + adapter->flags2 = ei->flags2; adapter->hw.adapter = adapter; adapter->hw.mac.type = ei->mac; adapter->msg_enable = (1 << NETIF_MSG_DRV | NETIF_MSG_PROBE) - 1; diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index 77a3d7207a5f..e909f96698e8 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -151,6 +151,16 @@ E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround"); */ E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]"); +/* + * Enable CRC Stripping + * + * Valid Range: 0, 1 + * + * Default Value: 1 (enabled) + */ +E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \ + "the CRC"); + struct e1000_option { enum { enable_option, range_option, list_option } type; const char *name; @@ -404,6 +414,21 @@ void __devinit e1000e_check_options(struct e1000_adapter *adapter) adapter->flags |= FLAG_SMART_POWER_DOWN; } } + { /* CRC Stripping */ + const struct e1000_option opt = { + .type = enable_option, + .name = "CRC Stripping", + .err = "defaulting to enabled", + .def = OPTION_ENABLED + }; + + if (num_CrcStripping > bd) { + unsigned int crc_stripping = CrcStripping[bd]; + e1000_validate_option(&crc_stripping, &opt, adapter); + if (crc_stripping == OPTION_ENABLED) + adapter->flags2 |= FLAG2_CRC_STRIPPING; + } + } { /* Kumeran Lock Loss Workaround */ const struct e1000_option opt = { .type = enable_option, From ebfe92ca65c780334bdf847ddc4eca15835bd9c0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?R=C3=A9mi=20Denis-Courmont?= Date: Sun, 16 Nov 2008 19:48:49 -0800 Subject: [PATCH 25/27] Phonet: refuse to send bigger than MTU packets MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rémi Denis-Courmont Signed-off-by: David S. Miller --- net/phonet/af_phonet.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/phonet/af_phonet.c b/net/phonet/af_phonet.c index defeb7a0d502..7ab30f668b5a 100644 --- a/net/phonet/af_phonet.c +++ b/net/phonet/af_phonet.c @@ -144,8 +144,8 @@ static int pn_send(struct sk_buff *skb, struct net_device *dev, struct phonethdr *ph; int err; - if (skb->len + 2 > 0xffff) { - /* Phonet length field would overflow */ + if (skb->len + 2 > 0xffff /* Phonet length field limit */ || + skb->len + sizeof(struct phonethdr) > dev->mtu) { err = -EMSGSIZE; goto drop; } From 584c650b4e6fa16f9ab45d382f86ad6d9c625227 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Sun, 16 Nov 2008 23:03:45 -0800 Subject: [PATCH 26/27] isdn: remove extra byteswap in isdn_net_ciscohdlck_slarp_send_reply commit a144ea4b7a13087081ab5402fa9ad0bcfd249e67 [IPV4]: annotate struct in_ifaddr Missed this extra byteswap as the isdn inlines hide the htonl inside put_u32 which causes an extra byteswap on little-endian arches. Signed-off-by: Harvey Harrison Signed-off-by: David S. Miller --- drivers/isdn/i4l/isdn_net.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/isdn/i4l/isdn_net.c b/drivers/isdn/i4l/isdn_net.c index bb904a0a98bd..1bfc55d7a26c 100644 --- a/drivers/isdn/i4l/isdn_net.c +++ b/drivers/isdn/i4l/isdn_net.c @@ -1641,8 +1641,10 @@ isdn_net_ciscohdlck_slarp_send_reply(isdn_net_local *lp) /* slarp reply, send own ip/netmask; if values are nonsense remote * should think we are unable to provide it with an address via SLARP */ p += put_u32(p, CISCO_SLARP_REPLY); - p += put_u32(p, addr); // address - p += put_u32(p, mask); // netmask + *(__be32 *)p = addr; // address + p += 4; + *(__be32 *)p = mask; // netmask + p += 4; p += put_u16(p, 0); // unused isdn_net_write_super(lp, skb); From 5f9021cfdc3524a4c5e3d7ae2d049eb7adcd6776 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 16 Nov 2008 23:20:31 -0800 Subject: [PATCH 27/27] rtnetlink: propagate error from dev_change_flags in do_setlink() Unlike ifconfig, iproute doesn't report an error when setting an interface up fails: (example: put wireless network mac80211 interface into repeater mode with iwconfig but do not set a peer MAC address, it should fail with -ENOLINK) without patch: # ip link set wlan0 up ; echo $? 0 # with patch: # ip link set wlan0 up ; echo $? RTNETLINK answers: Link has been severed 2 # Propagate the return value from dev_change_flags() to fix this. Signed-off-by: Patrick McHardy Tested-by: Johannes Berg Signed-off-by: Johannes Berg Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index 31f29d2989fd..4dfb6b4d4559 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -878,7 +878,9 @@ static int do_setlink(struct net_device *dev, struct ifinfomsg *ifm, if (ifm->ifi_change) flags = (flags & ifm->ifi_change) | (dev->flags & ~ifm->ifi_change); - dev_change_flags(dev, flags); + err = dev_change_flags(dev, flags); + if (err < 0) + goto errout; } if (tb[IFLA_TXQLEN])