staging: dwc2: set up all module params
The DWC2 USB controller in the BCM2835 (Raspberry Pi) needs some non- default parameters. Select these based on the compatible value from the DT node. For all other HW, fall back to the default parameters currently in use. The values in params_bcm2835[] were posted to the mailing list by Paul quite some time ago. I made a couple of minor modifications since then; to set ahbcfg instead of ahb_single, and to set uframe_sched. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
parent
f4b406dc43
commit
831eae69a8
|
@ -2,7 +2,9 @@ Platform DesignWare HS OTG USB 2.0 controller
|
|||
-----------------------------------------------------
|
||||
|
||||
Required properties:
|
||||
- compatible : "snps,dwc2"
|
||||
- compatible : One of:
|
||||
- brcm,bcm2835-usb: The DWC2 USB controller instance in the BCM2835 SoC.
|
||||
- snps,dwc2: A generic DWC2 USB controller with default parameters.
|
||||
- reg : Should contain 1 register range (address and length)
|
||||
- interrupts : Should contain 1 interrupt
|
||||
|
||||
|
|
|
@ -39,6 +39,7 @@
|
|||
#include <linux/slab.h>
|
||||
#include <linux/device.h>
|
||||
#include <linux/dma-mapping.h>
|
||||
#include <linux/of_device.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#include "core.h"
|
||||
|
@ -46,6 +47,34 @@
|
|||
|
||||
static const char dwc2_driver_name[] = "dwc2";
|
||||
|
||||
static const struct dwc2_core_params params_bcm2835 = {
|
||||
.otg_cap = 0, /* HNP/SRP capable */
|
||||
.otg_ver = 0, /* 1.3 */
|
||||
.dma_enable = 1,
|
||||
.dma_desc_enable = 0,
|
||||
.speed = 0, /* High Speed */
|
||||
.enable_dynamic_fifo = 1,
|
||||
.en_multiple_tx_fifo = 1,
|
||||
.host_rx_fifo_size = 774, /* 774 DWORDs */
|
||||
.host_nperio_tx_fifo_size = 256, /* 256 DWORDs */
|
||||
.host_perio_tx_fifo_size = 512, /* 512 DWORDs */
|
||||
.max_transfer_size = 65535,
|
||||
.max_packet_count = 511,
|
||||
.host_channels = 8,
|
||||
.phy_type = 1, /* UTMI */
|
||||
.phy_utmi_width = 8, /* 8 bits */
|
||||
.phy_ulpi_ddr = 0, /* Single */
|
||||
.phy_ulpi_ext_vbus = 0,
|
||||
.i2c_enable = 0,
|
||||
.ulpi_fs_ls = 0,
|
||||
.host_support_fs_ls_low_power = 0,
|
||||
.host_ls_low_power_phy_clk = 0, /* 48 MHz */
|
||||
.ts_dline = 0,
|
||||
.reload_ctl = 0,
|
||||
.ahbcfg = 0x10,
|
||||
.uframe_sched = 1,
|
||||
};
|
||||
|
||||
/**
|
||||
* dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
|
||||
* DWC_otg driver
|
||||
|
@ -66,6 +95,13 @@ static int dwc2_driver_remove(struct platform_device *dev)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static const struct of_device_id dwc2_of_match_table[] = {
|
||||
{ .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 },
|
||||
{ .compatible = "snps,dwc2", .data = NULL },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
|
||||
|
||||
/**
|
||||
* dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
|
||||
* driver
|
||||
|
@ -80,14 +116,22 @@ static int dwc2_driver_remove(struct platform_device *dev)
|
|||
*/
|
||||
static int dwc2_driver_probe(struct platform_device *dev)
|
||||
{
|
||||
const struct of_device_id *match;
|
||||
const struct dwc2_core_params *params;
|
||||
struct dwc2_core_params defparams;
|
||||
struct dwc2_hsotg *hsotg;
|
||||
struct resource *res;
|
||||
int retval;
|
||||
int irq;
|
||||
struct dwc2_core_params params;
|
||||
|
||||
/* Default all params to autodetect */
|
||||
dwc2_set_all_params(¶ms, -1);
|
||||
match = of_match_device(dwc2_of_match_table, &dev->dev);
|
||||
if (match && match->data) {
|
||||
params = match->data;
|
||||
} else {
|
||||
/* Default all params to autodetect */
|
||||
dwc2_set_all_params(&defparams, -1);
|
||||
params = &defparams;
|
||||
}
|
||||
|
||||
hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
|
||||
if (!hsotg)
|
||||
|
@ -118,7 +162,7 @@ static int dwc2_driver_probe(struct platform_device *dev)
|
|||
dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
|
||||
(unsigned long)res->start, hsotg->regs);
|
||||
|
||||
retval = dwc2_hcd_init(hsotg, irq, ¶ms);
|
||||
retval = dwc2_hcd_init(hsotg, irq, params);
|
||||
if (retval)
|
||||
return retval;
|
||||
|
||||
|
@ -127,12 +171,6 @@ static int dwc2_driver_probe(struct platform_device *dev)
|
|||
return retval;
|
||||
}
|
||||
|
||||
static const struct of_device_id dwc2_of_match_table[] = {
|
||||
{ .compatible = "snps,dwc2" },
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, dwc2_of_match_table);
|
||||
|
||||
static struct platform_driver dwc2_platform_driver = {
|
||||
.driver = {
|
||||
.name = dwc2_driver_name,
|
||||
|
|
Loading…
Reference in New Issue