From d53cdbb94a52a920d5420ed64d986c3523a56743 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 31 Mar 2010 21:39:35 +0200 Subject: [PATCH 001/109] ssb: do not read SPROM if it does not exist MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Attempting to read registers that don't exist on the SSB bus can cause hangs on some boxes. At least some b43 devices are 'in the wild' that don't have SPROMs at all. When the SSB bus support loads, it attempts to read these (non-existant) SPROMs and causes hard hangs on the box -- no console output, etc. This patch adds some intelligence to determine whether or not the SPROM is present before attempting to read it. This avoids those hard hangs on those devices with no SPROM attached to their SSB bus. The SSB-attached devices (e.g. b43, et al.) won't work, but at least the box will survive to test further patches. :-) Signed-off-by: John W. Linville Signed-off-by: Rafał Miłecki Cc: Larry Finger Cc: Michael Buesch --- drivers/ssb/driver_chipcommon.c | 2 ++ drivers/ssb/pci.c | 5 +++++ drivers/ssb/sprom.c | 14 ++++++++++++++ include/linux/ssb/ssb.h | 3 +++ include/linux/ssb/ssb_driver_chipcommon.h | 15 +++++++++++++++ 5 files changed, 39 insertions(+) diff --git a/drivers/ssb/driver_chipcommon.c b/drivers/ssb/driver_chipcommon.c index 59c3c0fdbecd..59ae76bace14 100644 --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c @@ -233,6 +233,8 @@ void ssb_chipcommon_init(struct ssb_chipcommon *cc) { if (!cc->dev) return; /* We don't have a ChipCommon */ + if (cc->dev->id.revision >= 11) + cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); ssb_pmu_init(cc); chipco_powercontrol_init(cc); ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c index 9e50896233aa..a4b2b99f2c80 100644 --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c @@ -620,6 +620,11 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus, int err = -ENOMEM; u16 *buf; + if (!ssb_is_sprom_available(bus)) { + ssb_printk(KERN_ERR PFX "No SPROM available!\n"); + return -ENODEV; + } + buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); if (!buf) goto out; diff --git a/drivers/ssb/sprom.c b/drivers/ssb/sprom.c index d0e6762fec50..83bc088b941d 100644 --- a/drivers/ssb/sprom.c +++ b/drivers/ssb/sprom.c @@ -175,3 +175,17 @@ const struct ssb_sprom *ssb_get_fallback_sprom(void) { return fallback_sprom; } + +/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ +bool ssb_is_sprom_available(struct ssb_bus *bus) +{ + /* status register only exists on chipcomon rev >= 11 and we need check + for >= 31 only */ + /* this routine differs from specs as we do not access SPROM directly + on PCMCIA */ + if (bus->bustype == SSB_BUSTYPE_PCI && + bus->chipco.dev->id.revision >= 31) + return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM; + + return true; +} diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index 24f988547361..3b4da233e31d 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -394,6 +394,9 @@ extern int ssb_bus_sdiobus_register(struct ssb_bus *bus, extern void ssb_bus_unregister(struct ssb_bus *bus); +/* Does the device have an SPROM? */ +extern bool ssb_is_sprom_available(struct ssb_bus *bus); + /* Set a fallback SPROM. * See kdoc at the function definition for complete documentation. */ extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom); diff --git a/include/linux/ssb/ssb_driver_chipcommon.h b/include/linux/ssb/ssb_driver_chipcommon.h index 4e27acf0a92f..2cdf249b4e5f 100644 --- a/include/linux/ssb/ssb_driver_chipcommon.h +++ b/include/linux/ssb/ssb_driver_chipcommon.h @@ -53,6 +53,7 @@ #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */ #define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ #define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ +#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */ #define SSB_CHIPCO_CORECTL 0x0008 #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ @@ -385,6 +386,7 @@ /** Chip specific Chip-Status register contents. */ +#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */ #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003 #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ #define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ @@ -398,6 +400,18 @@ #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4 #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */ +/** Macros to determine SPROM presence based on Chip-Status register. */ +#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \ + ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ + SSB_CHIPCO_CHST_4325_OTP_SEL) +#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \ + (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS) +#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \ + (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ + SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \ + ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ + SSB_CHIPCO_CHST_4325_OTP_SEL)) + /** Clockcontrol masks and values **/ @@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu { struct ssb_chipcommon { struct ssb_device *dev; u32 capabilities; + u32 status; /* Fast Powerup Delay constant */ u16 fast_pwrup_delay; struct ssb_chipcommon_pmu pmu; From ea2db495f92ad2cf3301623e60cb95b4062bc484 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Wed, 31 Mar 2010 21:59:21 +0200 Subject: [PATCH 002/109] ssb: Look for SPROM at different offset on higher rev CC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Our offset handling becomes even a little more hackish now. For some reason I do not understand all offsets as inrelative. It assumes base offset is 0x1000 but it will work for now as we make offsets relative anyway by removing base 0x1000. Should be cleaner however. Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/ssb/pci.c | 9 ++++++--- include/linux/ssb/ssb.h | 1 + include/linux/ssb/ssb_regs.h | 3 ++- 3 files changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c index a4b2b99f2c80..5bb1278759c1 100644 --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c @@ -167,7 +167,7 @@ err_pci: } /* Get the word-offset for a SSB_SPROM_XXX define. */ -#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16)) +#define SPOFF(offset) (((offset) - SSB_SPROM_BASE1) / sizeof(u16)) /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ #define SPEX16(_outvar, _offset, _mask, _shift) \ out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) @@ -253,7 +253,7 @@ static int sprom_do_read(struct ssb_bus *bus, u16 *sprom) int i; for (i = 0; i < bus->sprom_size; i++) - sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2)); + sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2)); return 0; } @@ -284,7 +284,7 @@ static int sprom_do_write(struct ssb_bus *bus, const u16 *sprom) ssb_printk("75%%"); else if (i % 2) ssb_printk("."); - writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2)); + writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2)); mmiowb(); msleep(20); } @@ -625,6 +625,9 @@ static int ssb_pci_sprom_get(struct ssb_bus *bus, return -ENODEV; } + bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ? + SSB_SPROM_BASE1 : SSB_SPROM_BASE31; + buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); if (!buf) goto out; diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h index 3b4da233e31d..a2608bff9c78 100644 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h @@ -305,6 +305,7 @@ struct ssb_bus { /* ID information about the Chip. */ u16 chip_id; u16 chip_rev; + u16 sprom_offset; u16 sprom_size; /* number of words in sprom */ u8 chip_package; diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index 9ae9082eaeb4..b8be23ce1915 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -170,7 +170,8 @@ #define SSB_SPROMSIZE_WORDS_R4 220 #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16)) #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16)) -#define SSB_SPROM_BASE 0x1000 +#define SSB_SPROM_BASE1 0x1000 +#define SSB_SPROM_BASE31 0x0800 #define SSB_SPROM_REVISION 0x107E #define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */ #define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */ From 0a182fd88f8180b342f753f04c7d5507b5891c96 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Wed, 31 Mar 2010 22:54:18 +0200 Subject: [PATCH 003/109] ssb: Use relative offsets for SPROM MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- drivers/ssb/pci.c | 2 +- include/linux/ssb/ssb_regs.h | 196 +++++++++++++++++------------------ 2 files changed, 99 insertions(+), 99 deletions(-) diff --git a/drivers/ssb/pci.c b/drivers/ssb/pci.c index 5bb1278759c1..3f556d6ec4c2 100644 --- a/drivers/ssb/pci.c +++ b/drivers/ssb/pci.c @@ -167,7 +167,7 @@ err_pci: } /* Get the word-offset for a SSB_SPROM_XXX define. */ -#define SPOFF(offset) (((offset) - SSB_SPROM_BASE1) / sizeof(u16)) +#define SPOFF(offset) ((offset) / sizeof(u16)) /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ #define SPEX16(_outvar, _offset, _mask, _shift) \ out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index b8be23ce1915..8990e30c657a 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -172,25 +172,25 @@ #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16)) #define SSB_SPROM_BASE1 0x1000 #define SSB_SPROM_BASE31 0x0800 -#define SSB_SPROM_REVISION 0x107E +#define SSB_SPROM_REVISION 0x007E #define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */ #define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */ #define SSB_SPROM_REVISION_CRC_SHIFT 8 /* SPROM Revision 1 */ -#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */ -#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */ -#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */ -#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */ -#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */ -#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */ -#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */ +#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */ +#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */ +#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */ +#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */ +#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */ +#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */ +#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */ #define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ #define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ #define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5 #define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ #define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ -#define SSB_SPROM1_BINF 0x105C /* Board info */ +#define SSB_SPROM1_BINF 0x005C /* Board info */ #define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */ #define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */ #define SSB_SPROM1_BINF_CCODE_SHIFT 8 @@ -198,63 +198,63 @@ #define SSB_SPROM1_BINF_ANTBG_SHIFT 12 #define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */ #define SSB_SPROM1_BINF_ANTA_SHIFT 14 -#define SSB_SPROM1_PA0B0 0x105E -#define SSB_SPROM1_PA0B1 0x1060 -#define SSB_SPROM1_PA0B2 0x1062 -#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */ +#define SSB_SPROM1_PA0B0 0x005E +#define SSB_SPROM1_PA0B1 0x0060 +#define SSB_SPROM1_PA0B2 0x0062 +#define SSB_SPROM1_GPIOA 0x0064 /* General Purpose IO pins 0 and 1 */ #define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */ #define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */ #define SSB_SPROM1_GPIOA_P1_SHIFT 8 -#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */ +#define SSB_SPROM1_GPIOB 0x0066 /* General Purpuse IO pins 2 and 3 */ #define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */ #define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */ #define SSB_SPROM1_GPIOB_P3_SHIFT 8 -#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */ +#define SSB_SPROM1_MAXPWR 0x0068 /* Power Amplifier Max Power */ #define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */ #define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */ #define SSB_SPROM1_MAXPWR_A_SHIFT 8 -#define SSB_SPROM1_PA1B0 0x106A -#define SSB_SPROM1_PA1B1 0x106C -#define SSB_SPROM1_PA1B2 0x106E -#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */ +#define SSB_SPROM1_PA1B0 0x006A +#define SSB_SPROM1_PA1B1 0x006C +#define SSB_SPROM1_PA1B2 0x006E +#define SSB_SPROM1_ITSSI 0x0070 /* Idle TSSI Target */ #define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/ #define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */ #define SSB_SPROM1_ITSSI_A_SHIFT 8 -#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */ -#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */ +#define SSB_SPROM1_BFLLO 0x0072 /* Boardflags (low 16 bits) */ +#define SSB_SPROM1_AGAIN 0x0074 /* Antenna Gain (in dBm Q5.2) */ #define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */ #define SSB_SPROM1_AGAIN_BG_SHIFT 0 #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ #define SSB_SPROM1_AGAIN_A_SHIFT 8 /* SPROM Revision 2 (inherits from rev 1) */ -#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */ -#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */ +#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */ +#define SSB_SPROM2_MAXP_A 0x003A /* A-PHY Max Power */ #define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */ #define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */ #define SSB_SPROM2_MAXP_A_LO_SHIFT 8 -#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */ -#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */ -#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */ -#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */ -#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */ -#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */ -#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */ +#define SSB_SPROM2_PA1LOB0 0x003C /* A-PHY PowerAmplifier Low Settings */ +#define SSB_SPROM2_PA1LOB1 0x003E /* A-PHY PowerAmplifier Low Settings */ +#define SSB_SPROM2_PA1LOB2 0x0040 /* A-PHY PowerAmplifier Low Settings */ +#define SSB_SPROM2_PA1HIB0 0x0042 /* A-PHY PowerAmplifier High Settings */ +#define SSB_SPROM2_PA1HIB1 0x0044 /* A-PHY PowerAmplifier High Settings */ +#define SSB_SPROM2_PA1HIB2 0x0046 /* A-PHY PowerAmplifier High Settings */ +#define SSB_SPROM2_OPO 0x0078 /* OFDM Power Offset from CCK Level */ #define SSB_SPROM2_OPO_VALUE 0x00FF #define SSB_SPROM2_OPO_UNUSED 0xFF00 -#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */ +#define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */ /* SPROM Revision 3 (inherits most data from rev 2) */ -#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */ -#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ -#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ -#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ -#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */ +#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */ +#define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ +#define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ +#define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ +#define SSB_SPROM3_GPIOLDC 0x0042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */ #define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */ #define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8 #define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */ #define SSB_SPROM3_GPIOLDC_ON_SHIFT 16 -#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */ +#define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */ #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */ #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */ #define SSB_SPROM3_CCKPO_2M_SHIFT 4 @@ -265,100 +265,100 @@ #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ /* SPROM Revision 4 */ -#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */ -#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */ +#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */ +#define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */ #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5 #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ -#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */ -#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */ +#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */ +#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */ #define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ #define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 #define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ #define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 -#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */ -#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */ +#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ +#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */ #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */ #define SSB_SPROM4_AGAIN0_SHIFT 0 #define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */ #define SSB_SPROM4_AGAIN1_SHIFT 8 -#define SSB_SPROM4_AGAIN23 0x1060 +#define SSB_SPROM4_AGAIN23 0x0060 #define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */ #define SSB_SPROM4_AGAIN2_SHIFT 0 #define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */ #define SSB_SPROM4_AGAIN3_SHIFT 8 -#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */ -#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */ +#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ +#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */ #define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ #define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ #define SSB_SPROM4_ITSSI_BG_SHIFT 8 -#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */ +#define SSB_SPROM4_MAXP_A 0x008A /* Max Power A in path 1 */ #define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ #define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ #define SSB_SPROM4_ITSSI_A_SHIFT 8 -#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */ +#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */ #define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ #define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ #define SSB_SPROM4_GPIOA_P1_SHIFT 8 -#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */ +#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */ #define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ #define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ #define SSB_SPROM4_GPIOB_P3_SHIFT 8 -#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */ -#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */ -#define SSB_SPROM4_PA0B2 0x1086 -#define SSB_SPROM4_PA1B0 0x108E -#define SSB_SPROM4_PA1B1 0x1090 -#define SSB_SPROM4_PA1B2 0x1092 +#define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */ +#define SSB_SPROM4_PA0B1 0x0084 /* only guesses */ +#define SSB_SPROM4_PA0B2 0x0086 +#define SSB_SPROM4_PA1B0 0x008E +#define SSB_SPROM4_PA1B1 0x0090 +#define SSB_SPROM4_PA1B2 0x0092 /* SPROM Revision 5 (inherits most data from rev 4) */ -#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */ -#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */ -#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */ -#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */ -#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */ +#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */ +#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */ +#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ +#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */ +#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ #define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */ #define SSB_SPROM5_GPIOA_P1_SHIFT 8 -#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */ +#define SSB_SPROM5_GPIOB 0x0078 /* Gen. Purpose IO # 2 and 3 */ #define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */ #define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */ #define SSB_SPROM5_GPIOB_P3_SHIFT 8 /* SPROM Revision 8 */ -#define SSB_SPROM8_BOARDREV 0x1082 /* Board revision */ -#define SSB_SPROM8_BFLLO 0x1084 /* Board flags (bits 0-15) */ -#define SSB_SPROM8_BFLHI 0x1086 /* Board flags (bits 16-31) */ -#define SSB_SPROM8_BFL2LO 0x1088 /* Board flags (bits 32-47) */ -#define SSB_SPROM8_BFL2HI 0x108A /* Board flags (bits 48-63) */ -#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */ -#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */ -#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/ +#define SSB_SPROM8_BOARDREV 0x0082 /* Board revision */ +#define SSB_SPROM8_BFLLO 0x0084 /* Board flags (bits 0-15) */ +#define SSB_SPROM8_BFLHI 0x0086 /* Board flags (bits 16-31) */ +#define SSB_SPROM8_BFL2LO 0x0088 /* Board flags (bits 32-47) */ +#define SSB_SPROM8_BFL2HI 0x008A /* Board flags (bits 48-63) */ +#define SSB_SPROM8_IL0MAC 0x008C /* 6 byte MAC address */ +#define SSB_SPROM8_CCODE 0x0092 /* 2 byte country code */ +#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/ #define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ #define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 #define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ #define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 -#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */ +#define SSB_SPROM8_AGAIN01 0x009E /* Antenna Gain (in dBm Q5.2) */ #define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */ #define SSB_SPROM8_AGAIN0_SHIFT 0 #define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */ #define SSB_SPROM8_AGAIN1_SHIFT 8 -#define SSB_SPROM8_AGAIN23 0x10A0 +#define SSB_SPROM8_AGAIN23 0x00A0 #define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */ #define SSB_SPROM8_AGAIN2_SHIFT 0 #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ #define SSB_SPROM8_AGAIN3_SHIFT 8 -#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */ +#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */ #define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ #define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ #define SSB_SPROM8_GPIOA_P1_SHIFT 8 -#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */ +#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */ #define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ #define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ #define SSB_SPROM8_GPIOB_P3_SHIFT 8 -#define SSB_SPROM8_RSSIPARM2G 0x10A4 /* RSSI params for 2GHz */ +#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */ #define SSB_SPROM8_RSSISMF2G 0x000F #define SSB_SPROM8_RSSISMC2G 0x00F0 #define SSB_SPROM8_RSSISMC2G_SHIFT 4 @@ -366,7 +366,7 @@ #define SSB_SPROM8_RSSISAV2G_SHIFT 8 #define SSB_SPROM8_BXA2G 0x1800 #define SSB_SPROM8_BXA2G_SHIFT 11 -#define SSB_SPROM8_RSSIPARM5G 0x10A6 /* RSSI params for 5GHz */ +#define SSB_SPROM8_RSSIPARM5G 0x00A6 /* RSSI params for 5GHz */ #define SSB_SPROM8_RSSISMF5G 0x000F #define SSB_SPROM8_RSSISMC5G 0x00F0 #define SSB_SPROM8_RSSISMC5G_SHIFT 4 @@ -374,47 +374,47 @@ #define SSB_SPROM8_RSSISAV5G_SHIFT 8 #define SSB_SPROM8_BXA5G 0x1800 #define SSB_SPROM8_BXA5G_SHIFT 11 -#define SSB_SPROM8_TRI25G 0x10A8 /* TX isolation 2.4&5.3GHz */ +#define SSB_SPROM8_TRI25G 0x00A8 /* TX isolation 2.4&5.3GHz */ #define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */ #define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */ #define SSB_SPROM8_TRI5G_SHIFT 8 -#define SSB_SPROM8_TRI5GHL 0x10AA /* TX isolation 5.2/5.8GHz */ +#define SSB_SPROM8_TRI5GHL 0x00AA /* TX isolation 5.2/5.8GHz */ #define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */ #define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */ #define SSB_SPROM8_TRI5GH_SHIFT 8 -#define SSB_SPROM8_RXPO 0x10AC /* RX power offsets */ +#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */ #define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ #define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ #define SSB_SPROM8_RXPO5G_SHIFT 8 -#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power 2GHz in path 1 */ +#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ #define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ #define SSB_SPROM8_ITSSI_BG_SHIFT 8 -#define SSB_SPROM8_PA0B0 0x10C2 /* 2GHz power amp settings */ -#define SSB_SPROM8_PA0B1 0x10C4 -#define SSB_SPROM8_PA0B2 0x10C6 -#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power 5.3GHz */ +#define SSB_SPROM8_PA0B0 0x00C2 /* 2GHz power amp settings */ +#define SSB_SPROM8_PA0B1 0x00C4 +#define SSB_SPROM8_PA0B2 0x00C6 +#define SSB_SPROM8_MAXP_A 0x00C8 /* Max Power 5.3GHz */ #define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */ #define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ #define SSB_SPROM8_ITSSI_A_SHIFT 8 -#define SSB_SPROM8_MAXP_AHL 0x10CA /* Max Power 5.2/5.8GHz */ +#define SSB_SPROM8_MAXP_AHL 0x00CA /* Max Power 5.2/5.8GHz */ #define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */ #define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */ #define SSB_SPROM8_MAXP_AL_SHIFT 8 -#define SSB_SPROM8_PA1B0 0x10CC /* 5.3GHz power amp settings */ -#define SSB_SPROM8_PA1B1 0x10CE -#define SSB_SPROM8_PA1B2 0x10D0 -#define SSB_SPROM8_PA1LOB0 0x10D2 /* 5.2GHz power amp settings */ -#define SSB_SPROM8_PA1LOB1 0x10D4 -#define SSB_SPROM8_PA1LOB2 0x10D6 -#define SSB_SPROM8_PA1HIB0 0x10D8 /* 5.8GHz power amp settings */ -#define SSB_SPROM8_PA1HIB1 0x10DA -#define SSB_SPROM8_PA1HIB2 0x10DC -#define SSB_SPROM8_CCK2GPO 0x1140 /* CCK power offset */ -#define SSB_SPROM8_OFDM2GPO 0x1142 /* 2.4GHz OFDM power offset */ -#define SSB_SPROM8_OFDM5GPO 0x1146 /* 5.3GHz OFDM power offset */ -#define SSB_SPROM8_OFDM5GLPO 0x114A /* 5.2GHz OFDM power offset */ -#define SSB_SPROM8_OFDM5GHPO 0x114E /* 5.8GHz OFDM power offset */ +#define SSB_SPROM8_PA1B0 0x00CC /* 5.3GHz power amp settings */ +#define SSB_SPROM8_PA1B1 0x00CE +#define SSB_SPROM8_PA1B2 0x00D0 +#define SSB_SPROM8_PA1LOB0 0x00D2 /* 5.2GHz power amp settings */ +#define SSB_SPROM8_PA1LOB1 0x00D4 +#define SSB_SPROM8_PA1LOB2 0x00D6 +#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ +#define SSB_SPROM8_PA1HIB1 0x00DA +#define SSB_SPROM8_PA1HIB2 0x00DC +#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ +#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ +#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ /* Values for SSB_SPROM1_BINF_CCODE */ enum { From 5af55428858a45d94893fd6124d60988e89c0d59 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Wed, 31 Mar 2010 22:54:19 +0200 Subject: [PATCH 004/109] ssb: Fix order of definitions and some text space indents MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville --- include/linux/ssb/ssb_regs.h | 58 ++++++++++++++++++------------------ 1 file changed, 29 insertions(+), 29 deletions(-) diff --git a/include/linux/ssb/ssb_regs.h b/include/linux/ssb/ssb_regs.h index 8990e30c657a..a6d5225b9275 100644 --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h @@ -245,7 +245,6 @@ #define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */ /* SPROM Revision 3 (inherits most data from rev 2) */ -#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */ #define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ #define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ #define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ @@ -254,6 +253,7 @@ #define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8 #define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */ #define SSB_SPROM3_GPIOLDC_ON_SHIFT 16 +#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */ #define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */ #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */ #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */ @@ -265,20 +265,29 @@ #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ /* SPROM Revision 4 */ +#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ +#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ #define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */ +#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */ +#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */ +#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ +#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ +#define SSB_SPROM4_GPIOA_P1_SHIFT 8 +#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */ +#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ +#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ +#define SSB_SPROM4_GPIOB_P3_SHIFT 8 #define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */ #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5 #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ -#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */ #define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */ -#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ -#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 -#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ -#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 -#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ +#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ +#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 +#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ +#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 #define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */ #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */ #define SSB_SPROM4_AGAIN0_SHIFT 0 @@ -289,7 +298,6 @@ #define SSB_SPROM4_AGAIN2_SHIFT 0 #define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */ #define SSB_SPROM4_AGAIN3_SHIFT 8 -#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ #define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */ #define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ #define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ @@ -298,14 +306,6 @@ #define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ #define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ #define SSB_SPROM4_ITSSI_A_SHIFT 8 -#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */ -#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ -#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ -#define SSB_SPROM4_GPIOA_P1_SHIFT 8 -#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */ -#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ -#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ -#define SSB_SPROM4_GPIOB_P3_SHIFT 8 #define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */ #define SSB_SPROM4_PA0B1 0x0084 /* only guesses */ #define SSB_SPROM4_PA0B2 0x0086 @@ -314,10 +314,10 @@ #define SSB_SPROM4_PA1B2 0x0092 /* SPROM Revision 5 (inherits most data from rev 4) */ +#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */ #define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */ #define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */ #define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ -#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */ #define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ #define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */ @@ -335,11 +335,19 @@ #define SSB_SPROM8_BFL2HI 0x008A /* Board flags (bits 48-63) */ #define SSB_SPROM8_IL0MAC 0x008C /* 6 byte MAC address */ #define SSB_SPROM8_CCODE 0x0092 /* 2 byte country code */ +#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */ +#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ +#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ +#define SSB_SPROM8_GPIOA_P1_SHIFT 8 +#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */ +#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ +#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ +#define SSB_SPROM8_GPIOB_P3_SHIFT 8 #define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/ -#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ -#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 -#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ -#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 +#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ +#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 +#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ +#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 #define SSB_SPROM8_AGAIN01 0x009E /* Antenna Gain (in dBm Q5.2) */ #define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */ #define SSB_SPROM8_AGAIN0_SHIFT 0 @@ -350,14 +358,6 @@ #define SSB_SPROM8_AGAIN2_SHIFT 0 #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ #define SSB_SPROM8_AGAIN3_SHIFT 8 -#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */ -#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ -#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ -#define SSB_SPROM8_GPIOA_P1_SHIFT 8 -#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */ -#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ -#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ -#define SSB_SPROM8_GPIOB_P3_SHIFT 8 #define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */ #define SSB_SPROM8_RSSISMF2G 0x000F #define SSB_SPROM8_RSSISMC2G 0x00F0 From 0c86980817853e4166f66c7cd18bc5fe1adeb5f7 Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Thu, 22 Apr 2010 10:27:48 +0300 Subject: [PATCH 005/109] mac80211: Fix sta->last_tx_rate setting with no-op rate control devices The sta->last_tx_rate is traditionally updated just before transmitting a frame based on information from the rate control algorithm. However, for hardware drivers with IEEE80211_HW_HAS_RATE_CONTROL this is not performed, as the rate control algorithm is not executed, and because the used rate is not known before the frame has actually been transmitted. This causes atleast a fixed 1Mb/s to be reported to user space. A few other instances of code also rely on this information. Fix this by setting the sta->last_tx_rate in tx_status handling. There, look for last rates entry set by the driver, and use that as value for sta->last_tx_rate. Signed-off-by: Juuso Oikarinen Signed-off-by: John W. Linville --- net/mac80211/status.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/mac80211/status.c b/net/mac80211/status.c index 11805a3a626f..94613af009f3 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -171,6 +171,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) struct net_device *prev_dev = NULL; struct sta_info *sta, *tmp; int retry_count = -1, i; + int rates_idx = -1; bool send_to_cooked; for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { @@ -178,6 +179,8 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) if (i >= hw->max_rates) { info->status.rates[i].idx = -1; info->status.rates[i].count = 0; + } else if (info->status.rates[i].idx >= 0) { + rates_idx = i; } retry_count += info->status.rates[i].count; @@ -206,6 +209,10 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) return; } + if ((local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) && + (rates_idx != -1)) + sta->last_tx_rate = info->status.rates[rates_idx]; + if ((info->flags & IEEE80211_TX_STAT_AMPDU_NO_BACK) && (ieee80211_is_data_qos(fc))) { u16 tid, ssn; From d4cde88c1c025ffa18150ec29e80e456f2a5c65a Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Thu, 22 Apr 2010 19:52:43 +0200 Subject: [PATCH 006/109] p54pci: fix regression from prevent stuck rx-ring on slow system This patch fixes a recently introduced use-after-free regression from "p54pci: prevent stuck rx-ring on slow system". Hans de Goede reported a use-after-free regression: >BUG: unable to handle kernel paging request at 6b6b6b6b >IP: [] p54p_check_tx_ring+0x84/0xb1 [p54pci] >*pde = 00000000 >Oops: 0000 [#1] SMP >EIP: 0060:[] EFLAGS: 00010286 CPU: 0 >EIP is at p54p_check_tx_ring+0x84/0xb1 [p54pci] >EAX: 6b6b6b6b EBX: df10b170 ECX: 00000003 EDX: 00000001 >ESI: dc471500 EDI: d8acaeb0 EBP: c098be9c ESP: c098be84 > DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 >Process swapper (pid: 0, ti=c098a000 task=c09ccfe0 task.ti=c098a000) >Call Trace: > [] ? p54p_tasklet+0xaa/0xb5 [p54pci] > [] ? tasklet_action+0x78/0xcb > [] ? __do_softirq+0xbc/0x173 Quote from comment #17: "The problem is the innocent looking moving of the tx processing to after the rx processing in the tasklet. Quoting from the changelog: This patch does it the same way, except that it also prioritize rx data processing, simply because tx routines *can* wait. This is causing an issue with us referencing already freed memory, because some skb's we transmit, we immediately receive back, such as those for reading the eeprom (*) and getting stats. What can happen because of the moving of the tx processing to after the rx processing is that when the tasklet first runs after doing a special skb tx (such as eeprom) we've already received the answer to it. Then the rx processing ends up calling p54_find_and_unlink_skb to find the matching tx skb for the just received special rx skb and frees the tx skb. Then after the processing of the rx skb answer, and thus freeing the tx skb, we go process the completed tx ring entires, and then dereference the free-ed skb, to see if it should free free-ed by p54p_check_tx_ring()." Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=583623 Bug-Identified-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Christian Lamparter Signed-off-by: John W. Linville --- drivers/net/wireless/p54/p54pci.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index 0a516c8efd20..fc67888db0ca 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -276,6 +276,14 @@ static void p54p_tasklet(unsigned long dev_id) struct p54p_priv *priv = dev->priv; struct p54p_ring_control *ring_control = priv->ring_control; + p54p_check_tx_ring(dev, &priv->tx_idx_mgmt, 3, ring_control->tx_mgmt, + ARRAY_SIZE(ring_control->tx_mgmt), + priv->tx_buf_mgmt); + + p54p_check_tx_ring(dev, &priv->tx_idx_data, 1, ring_control->tx_data, + ARRAY_SIZE(ring_control->tx_data), + priv->tx_buf_data); + p54p_check_rx_ring(dev, &priv->rx_idx_mgmt, 2, ring_control->rx_mgmt, ARRAY_SIZE(ring_control->rx_mgmt), priv->rx_buf_mgmt); @@ -284,14 +292,6 @@ static void p54p_tasklet(unsigned long dev_id) wmb(); P54P_WRITE(dev_int, cpu_to_le32(ISL38XX_DEV_INT_UPDATE)); - - p54p_check_tx_ring(dev, &priv->tx_idx_mgmt, 3, ring_control->tx_mgmt, - ARRAY_SIZE(ring_control->tx_mgmt), - priv->tx_buf_mgmt); - - p54p_check_tx_ring(dev, &priv->tx_idx_data, 1, ring_control->tx_data, - ARRAY_SIZE(ring_control->tx_data), - priv->tx_buf_data); } static irqreturn_t p54p_interrupt(int irq, void *dev_id) From c11d8f89d3b785f3ef987c2d9ee1bfea6f8b3d0f Mon Sep 17 00:00:00 2001 From: Sujith Date: Fri, 23 Apr 2010 10:28:09 +0530 Subject: [PATCH 007/109] ath9k_htc: Simplify TX URB management This patch simplifies URB management for transmission, by removing the 'FLUSH' variable (which is not needed, since we can determine if the URB has been killed by looking at the URB status), and also handling the STOP case properly. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hif_usb.c | 130 +++++++++++------------ drivers/net/wireless/ath/ath9k/hif_usb.h | 1 - 2 files changed, 61 insertions(+), 70 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 3091bb3cef9b..cee5febb8a4d 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -93,63 +93,6 @@ static int hif_usb_send_regout(struct hif_device_usb *hif_dev, return ret; } -static void hif_usb_tx_cb(struct urb *urb) -{ - struct tx_buf *tx_buf = (struct tx_buf *) urb->context; - struct hif_device_usb *hif_dev = tx_buf->hif_dev; - struct sk_buff *skb; - bool drop, flush; - - if (!hif_dev) - return; - - switch (urb->status) { - case 0: - break; - case -ENOENT: - case -ECONNRESET: - break; - case -ENODEV: - case -ESHUTDOWN: - return; - default: - break; - } - - if (tx_buf) { - spin_lock(&hif_dev->tx.tx_lock); - drop = !!(hif_dev->tx.flags & HIF_USB_TX_STOP); - flush = !!(hif_dev->tx.flags & HIF_USB_TX_FLUSH); - spin_unlock(&hif_dev->tx.tx_lock); - - while ((skb = __skb_dequeue(&tx_buf->skb_queue)) != NULL) { - if (!drop && !flush) { - ath9k_htc_txcompletion_cb(hif_dev->htc_handle, - skb, 1); - TX_STAT_INC(skb_completed); - } else { - dev_kfree_skb_any(skb); - TX_STAT_INC(skb_dropped); - } - } - - if (flush) - return; - - tx_buf->len = tx_buf->offset = 0; - __skb_queue_head_init(&tx_buf->skb_queue); - - spin_lock(&hif_dev->tx.tx_lock); - list_del(&tx_buf->list); - list_add_tail(&tx_buf->list, &hif_dev->tx.tx_buf); - hif_dev->tx.tx_buf_cnt++; - if (!drop) - __hif_usb_tx(hif_dev); /* Check for pending SKBs */ - TX_STAT_INC(buf_completed); - spin_unlock(&hif_dev->tx.tx_lock); - } -} - static inline void ath9k_skb_queue_purge(struct hif_device_usb *hif_dev, struct sk_buff_head *list) { @@ -161,6 +104,63 @@ static inline void ath9k_skb_queue_purge(struct hif_device_usb *hif_dev, } } +static void hif_usb_tx_cb(struct urb *urb) +{ + struct tx_buf *tx_buf = (struct tx_buf *) urb->context; + struct hif_device_usb *hif_dev = tx_buf->hif_dev; + struct sk_buff *skb; + + if (!hif_dev || !tx_buf) + return; + + switch (urb->status) { + case 0: + break; + case -ENOENT: + case -ECONNRESET: + case -ENODEV: + case -ESHUTDOWN: + /* + * The URB has been killed, free the SKBs + * and return. + */ + ath9k_skb_queue_purge(hif_dev, &tx_buf->skb_queue); + return; + default: + break; + } + + /* Check if TX has been stopped */ + spin_lock(&hif_dev->tx.tx_lock); + if (hif_dev->tx.flags & HIF_USB_TX_STOP) { + spin_unlock(&hif_dev->tx.tx_lock); + ath9k_skb_queue_purge(hif_dev, &tx_buf->skb_queue); + goto add_free; + } + spin_unlock(&hif_dev->tx.tx_lock); + + /* Complete the queued SKBs. */ + while ((skb = __skb_dequeue(&tx_buf->skb_queue)) != NULL) { + ath9k_htc_txcompletion_cb(hif_dev->htc_handle, + skb, 1); + TX_STAT_INC(skb_completed); + } + +add_free: + /* Re-initialize the SKB queue */ + tx_buf->len = tx_buf->offset = 0; + __skb_queue_head_init(&tx_buf->skb_queue); + + /* Add this TX buffer to the free list */ + spin_lock(&hif_dev->tx.tx_lock); + list_move_tail(&tx_buf->list, &hif_dev->tx.tx_buf); + hif_dev->tx.tx_buf_cnt++; + if (!(hif_dev->tx.flags & HIF_USB_TX_STOP)) + __hif_usb_tx(hif_dev); /* Check for pending SKBs */ + TX_STAT_INC(buf_completed); + spin_unlock(&hif_dev->tx.tx_lock); +} + /* TX lock has to be taken */ static int __hif_usb_tx(struct hif_device_usb *hif_dev) { @@ -178,8 +178,7 @@ static int __hif_usb_tx(struct hif_device_usb *hif_dev) return 0; tx_buf = list_first_entry(&hif_dev->tx.tx_buf, struct tx_buf, list); - list_del(&tx_buf->list); - list_add_tail(&tx_buf->list, &hif_dev->tx.tx_pending); + list_move_tail(&tx_buf->list, &hif_dev->tx.tx_pending); hif_dev->tx.tx_buf_cnt--; tx_skb_cnt = min_t(u16, hif_dev->tx.tx_skb_cnt, MAX_TX_AGGR_NUM); @@ -548,20 +547,17 @@ free: static void ath9k_hif_usb_dealloc_tx_urbs(struct hif_device_usb *hif_dev) { - unsigned long flags; struct tx_buf *tx_buf = NULL, *tx_buf_tmp = NULL; - list_for_each_entry_safe(tx_buf, tx_buf_tmp, &hif_dev->tx.tx_buf, list) { + list_for_each_entry_safe(tx_buf, tx_buf_tmp, + &hif_dev->tx.tx_buf, list) { + usb_kill_urb(tx_buf->urb); list_del(&tx_buf->list); usb_free_urb(tx_buf->urb); kfree(tx_buf->buf); kfree(tx_buf); } - spin_lock_irqsave(&hif_dev->tx.tx_lock, flags); - hif_dev->tx.flags |= HIF_USB_TX_FLUSH; - spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags); - list_for_each_entry_safe(tx_buf, tx_buf_tmp, &hif_dev->tx.tx_pending, list) { usb_kill_urb(tx_buf->urb); @@ -570,10 +566,6 @@ static void ath9k_hif_usb_dealloc_tx_urbs(struct hif_device_usb *hif_dev) kfree(tx_buf->buf); kfree(tx_buf); } - - spin_lock_irqsave(&hif_dev->tx.tx_lock, flags); - hif_dev->tx.flags &= ~HIF_USB_TX_FLUSH; - spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags); } static int ath9k_hif_usb_alloc_tx_urbs(struct hif_device_usb *hif_dev) diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.h b/drivers/net/wireless/ath/ath9k/hif_usb.h index 7d49a8af420e..0aca49b6fcb6 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.h +++ b/drivers/net/wireless/ath/ath9k/hif_usb.h @@ -61,7 +61,6 @@ struct tx_buf { }; #define HIF_USB_TX_STOP BIT(0) -#define HIF_USB_TX_FLUSH BIT(1) struct hif_usb_tx { u8 flags; From a3be14b76da111ebe4d245b0542613f9317104e7 Mon Sep 17 00:00:00 2001 From: Sujith Date: Fri, 23 Apr 2010 10:28:10 +0530 Subject: [PATCH 008/109] ath9k_htc: Handle device unplug properly When the USB device has been unplugged, there is no point in trying to send commands to the target. Fix this by denying all WMI commands in such a case. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc.h | 1 + drivers/net/wireless/ath/ath9k/htc_drv_init.c | 8 ++++++++ drivers/net/wireless/ath/ath9k/wmi.c | 3 +++ 3 files changed, 12 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h index c765ff4a505c..b771e20075a5 100644 --- a/drivers/net/wireless/ath/ath9k/htc.h +++ b/drivers/net/wireless/ath/ath9k/htc.h @@ -329,6 +329,7 @@ struct htc_beacon_config { #define OP_ASSOCIATED BIT(8) #define OP_ENABLE_BEACON BIT(9) #define OP_LED_DEINIT BIT(10) +#define OP_UNPLUGGED BIT(11) struct ath9k_htc_priv { struct device *dev; diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c index a86189629d92..701f2ef5a440 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c @@ -744,6 +744,9 @@ int ath9k_htc_probe_device(struct htc_target *htc_handle, struct device *dev, if (ret) goto err_init; + /* The device may have been unplugged earlier. */ + priv->op_flags &= ~OP_UNPLUGGED; + ret = ath9k_init_device(priv, devid); if (ret) goto err_init; @@ -760,6 +763,11 @@ err_free: void ath9k_htc_disconnect_device(struct htc_target *htc_handle, bool hotunplug) { if (htc_handle->drv_priv) { + + /* Check if the device has been yanked out. */ + if (hotunplug) + htc_handle->drv_priv->op_flags |= OP_UNPLUGGED; + ath9k_deinit_device(htc_handle->drv_priv); ath9k_deinit_wmi(htc_handle->drv_priv); ieee80211_free_hw(htc_handle->drv_priv->hw); diff --git a/drivers/net/wireless/ath/ath9k/wmi.c b/drivers/net/wireless/ath/ath9k/wmi.c index dc6c6fc2e095..c68854532659 100644 --- a/drivers/net/wireless/ath/ath9k/wmi.c +++ b/drivers/net/wireless/ath/ath9k/wmi.c @@ -276,6 +276,9 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id, int time_left, ret = 0; unsigned long flags; + if (wmi->drv_priv->op_flags & OP_UNPLUGGED) + return 0; + if (!wmi) return -EINVAL; From d5e347bf0f5e99f540aaaaca25ef4e957d59a506 Mon Sep 17 00:00:00 2001 From: Sujith Date: Fri, 23 Apr 2010 10:28:11 +0530 Subject: [PATCH 009/109] ath9k_htc: Use multiple register writes This patch fixes a code segment in configpciepowersave() to make use of multiple register writes. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9002_hw.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/ar9002_hw.c b/drivers/net/wireless/ath/ath9k/ar9002_hw.c index adb33b34a56d..a8a8cdc04afa 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_hw.c @@ -408,6 +408,8 @@ static void ar9002_hw_configpcipowersave(struct ath_hw *ah, REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000); } else { + ENABLE_REGWRITE_BUFFER(ah); + REG_WRITE(ah, AR_PCIE_SERDES, 0x9248fc00); REG_WRITE(ah, AR_PCIE_SERDES, 0x24924924); @@ -428,6 +430,9 @@ static void ar9002_hw_configpcipowersave(struct ath_hw *ah, /* Load the new settings */ REG_WRITE(ah, AR_PCIE_SERDES2, 0x00000000); + + REGWRITE_BUFFER_FLUSH(ah); + DISABLE_REGWRITE_BUFFER(ah); } udelay(1000); From 7073daa63b8794710fa6c928a6dd169e52791185 Mon Sep 17 00:00:00 2001 From: Sujith Date: Fri, 23 Apr 2010 10:28:13 +0530 Subject: [PATCH 010/109] ath9k_htc: Cancel running timers before disabling HW Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_drv_main.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index ec7bcc8696ec..9c9f3e0d6787 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -1178,6 +1178,13 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw) return; } + /* Cancel all the running timers/work .. */ + cancel_work_sync(&priv->ps_work); + cancel_delayed_work_sync(&priv->ath9k_ani_work); + cancel_delayed_work_sync(&priv->ath9k_aggr_work); + cancel_delayed_work_sync(&priv->ath9k_led_blink_work); + ath9k_led_stop_brightness(priv); + ath9k_htc_ps_wakeup(priv); htc_stop(priv->htc); WMI_CMD(WMI_DISABLE_INTR_CMDID); @@ -1189,11 +1196,6 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw) ath9k_htc_ps_restore(priv); ath9k_htc_setpower(priv, ATH9K_PM_FULL_SLEEP); - cancel_work_sync(&priv->ps_work); - cancel_delayed_work_sync(&priv->ath9k_ani_work); - cancel_delayed_work_sync(&priv->ath9k_aggr_work); - cancel_delayed_work_sync(&priv->ath9k_led_blink_work); - ath9k_led_stop_brightness(priv); skb_queue_purge(&priv->tx_queue); /* Remove monitor interface here */ From 51f139d567574e6a9b5c8aaddb8ff3a240cf8e52 Mon Sep 17 00:00:00 2001 From: Sujith Date: Fri, 23 Apr 2010 10:28:14 +0530 Subject: [PATCH 011/109] ath9k_hw: Remove pointless ANI deinit There is no reason to disable the PHY Error / MIB counters when the module is being unloaded. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ani.c | 9 --------- drivers/net/wireless/ath/ath9k/ani.h | 1 - drivers/net/wireless/ath/ath9k/hw.c | 3 --- 3 files changed, 13 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c index cec62d311c78..ba8b20f01594 100644 --- a/drivers/net/wireless/ath/ath9k/ani.c +++ b/drivers/net/wireless/ath/ath9k/ani.c @@ -657,12 +657,3 @@ void ath9k_hw_ani_init(struct ath_hw *ah) if (ah->config.enable_ani) ah->proc_phyerr |= HAL_PROCESS_ANI; } - -void ath9k_hw_ani_disable(struct ath_hw *ah) -{ - ath_print(ath9k_hw_common(ah), ATH_DBG_ANI, "Disabling ANI\n"); - - ath9k_hw_disable_mib_counters(ah); - REG_WRITE(ah, AR_PHY_ERR_1, 0); - REG_WRITE(ah, AR_PHY_ERR_2, 0); -} diff --git a/drivers/net/wireless/ath/ath9k/ani.h b/drivers/net/wireless/ath/ath9k/ani.h index 4e1ab94a5153..3356762ea384 100644 --- a/drivers/net/wireless/ath/ath9k/ani.h +++ b/drivers/net/wireless/ath/ath9k/ani.h @@ -118,6 +118,5 @@ u32 ath9k_hw_GetMibCycleCountsPct(struct ath_hw *ah, u32 *rxc_pcnt, void ath9k_hw_procmibevent(struct ath_hw *ah); void ath9k_hw_ani_setup(struct ath_hw *ah); void ath9k_hw_ani_init(struct ath_hw *ah); -void ath9k_hw_ani_disable(struct ath_hw *ah); #endif /* ANI_H */ diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 11e6a897c21a..b6d12e52d30e 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -818,9 +818,6 @@ void ath9k_hw_deinit(struct ath_hw *ah) if (common->state < ATH_HW_INITIALIZED) goto free_hw; - if (!AR_SREV_9100(ah)) - ath9k_hw_ani_disable(ah); - ath9k_hw_setpower(ah, ATH9K_PM_FULL_SLEEP); free_hw: From f66890724fb3131894b8eee5fc552a5dc42dc1df Mon Sep 17 00:00:00 2001 From: Sujith Date: Fri, 23 Apr 2010 10:28:15 +0530 Subject: [PATCH 012/109] ath9k_htc: Pass correct private pointer In the TX callback, the HTC layer has to pass the priv pointer that was registered during service initialization. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_hst.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/htc_hst.c b/drivers/net/wireless/ath/ath9k/htc_hst.c index f2dca258bdc2..7bf6ce1e7e2e 100644 --- a/drivers/net/wireless/ath/ath9k/htc_hst.c +++ b/drivers/net/wireless/ath/ath9k/htc_hst.c @@ -341,8 +341,9 @@ void ath9k_htc_txcompletion_cb(struct htc_target *htc_handle, skb_pull(skb, sizeof(struct htc_frame_hdr)); if (endpoint->ep_callbacks.tx) { - endpoint->ep_callbacks.tx(htc_handle->drv_priv, skb, - htc_hdr->endpoint_id, txok); + endpoint->ep_callbacks.tx(endpoint->ep_callbacks.priv, + skb, htc_hdr->endpoint_id, + txok); } } From 62e4716aff31a8ab687016680443012034734c92 Mon Sep 17 00:00:00 2001 From: Sujith Date: Fri, 23 Apr 2010 10:28:16 +0530 Subject: [PATCH 013/109] ath9k_htc: Use USB reboot So, apparently there is a USB reboot command that the target accepts. Using this instead of usb_reset_device() fixes the issue of "descriptor read error" that pops up on repeated load/unload. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hif_usb.c | 22 +++++++++++++++++++++- 1 file changed, 21 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index cee5febb8a4d..31665c5ad907 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -889,6 +889,26 @@ err_alloc: return ret; } +static void ath9k_hif_usb_reboot(struct usb_device *udev) +{ + u32 reboot_cmd = 0xffffffff; + void *buf; + int ret; + + buf = kmalloc(4, GFP_KERNEL); + if (!buf) + return; + + memcpy(buf, &reboot_cmd, 4); + + ret = usb_bulk_msg(udev, usb_sndbulkpipe(udev, USB_REG_OUT_PIPE), + buf, 4, NULL, HZ); + if (ret) + dev_err(&udev->dev, "ath9k_htc: USB reboot failed\n"); + + kfree(buf); +} + static void ath9k_hif_usb_disconnect(struct usb_interface *interface) { struct usb_device *udev = interface_to_usbdev(interface); @@ -903,7 +923,7 @@ static void ath9k_hif_usb_disconnect(struct usb_interface *interface) } if (hif_dev->flags & HIF_USB_START) - usb_reset_device(udev); + ath9k_hif_usb_reboot(udev); kfree(hif_dev); dev_info(&udev->dev, "ath9k_htc: USB layer deinitialized\n"); From 5ab0af3270b29c62b8960a60092917ec8be48c4a Mon Sep 17 00:00:00 2001 From: Sujith Date: Fri, 23 Apr 2010 10:28:17 +0530 Subject: [PATCH 014/109] ath9k_htc: Process command data properly When handling the REGIN callback, processing the incoming data first should be the preferred mode of operation. Allocation of a new SKB may fail, in which case, the URB will not be resubmitted. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hif_usb.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 31665c5ad907..49b7a8970ddd 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -510,9 +510,18 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb) if (likely(urb->actual_length != 0)) { skb_put(skb, urb->actual_length); + /* Process the command first */ + ath9k_htc_rx_msg(hif_dev->htc_handle, skb, + skb->len, USB_REG_IN_PIPE); + + nskb = alloc_skb(MAX_REG_IN_BUF_SIZE, GFP_ATOMIC); - if (!nskb) - goto resubmit; + if (!nskb) { + dev_err(&hif_dev->udev->dev, + "ath9k_htc: REG_IN memory allocation failure\n"); + urb->context = NULL; + return; + } usb_fill_int_urb(urb, hif_dev->udev, usb_rcvintpipe(hif_dev->udev, USB_REG_IN_PIPE), @@ -522,12 +531,9 @@ static void ath9k_hif_usb_reg_in_cb(struct urb *urb) ret = usb_submit_urb(urb, GFP_ATOMIC); if (ret) { kfree_skb(nskb); - goto free; + urb->context = NULL; } - ath9k_htc_rx_msg(hif_dev->htc_handle, skb, - skb->len, USB_REG_IN_PIPE); - return; } From ba44370175d2e743065382508ed7823cc83cea0a Mon Sep 17 00:00:00 2001 From: Sujith Date: Fri, 23 Apr 2010 10:28:18 +0530 Subject: [PATCH 015/109] ath9k_htc: Increase WMI timeout value Completion of WMI commands take a longer time on some platforms. Increase the timeout value to handle this. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/wmi.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/wmi.h b/drivers/net/wireless/ath/ath9k/wmi.h index 167e15c50062..765db5faa2d3 100644 --- a/drivers/net/wireless/ath/ath9k/wmi.h +++ b/drivers/net/wireless/ath/ath9k/wmi.h @@ -126,14 +126,14 @@ void ath9k_wmi_tasklet(unsigned long data); do { \ ret = ath9k_wmi_cmd(priv->wmi, _wmi_cmd, NULL, 0, \ (u8 *) &cmd_rsp, \ - sizeof(cmd_rsp), HZ); \ + sizeof(cmd_rsp), HZ*2); \ } while (0) #define WMI_CMD_BUF(_wmi_cmd, _buf) \ do { \ ret = ath9k_wmi_cmd(priv->wmi, _wmi_cmd, \ (u8 *) _buf, sizeof(*_buf), \ - &cmd_rsp, sizeof(cmd_rsp), HZ); \ + &cmd_rsp, sizeof(cmd_rsp), HZ*2); \ } while (0) #endif /* WMI_H */ From 0d36d71da2a3e5b28b4e7743c0041515cca798ef Mon Sep 17 00:00:00 2001 From: Sujith Date: Fri, 23 Apr 2010 10:28:19 +0530 Subject: [PATCH 016/109] ath9k_htc: Fix WMI command race My patch "ath9k_htc: Handle WMI timeouts properly" introduced a race condition in WMI command processing. The last issued command should be stored _before_ issuing a WMI command. Not doing this would result in the WMI event IRQ dropping correct command responses as invalid. Fix this race by storing the command id correctly. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/wmi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/wmi.c b/drivers/net/wireless/ath/ath9k/wmi.c index c68854532659..e23172c9caaf 100644 --- a/drivers/net/wireless/ath/ath9k/wmi.c +++ b/drivers/net/wireless/ath/ath9k/wmi.c @@ -305,14 +305,14 @@ int ath9k_wmi_cmd(struct wmi *wmi, enum wmi_cmd_id cmd_id, wmi->cmd_rsp_buf = rsp_buf; wmi->cmd_rsp_len = rsp_len; - ret = ath9k_wmi_cmd_issue(wmi, skb, cmd_id, cmd_len); - if (ret) - goto out; - spin_lock_irqsave(&wmi->wmi_lock, flags); wmi->last_cmd_id = cmd_id; spin_unlock_irqrestore(&wmi->wmi_lock, flags); + ret = ath9k_wmi_cmd_issue(wmi, skb, cmd_id, cmd_len); + if (ret) + goto out; + time_left = wait_for_completion_timeout(&wmi->cmd_wait, timeout); if (!time_left) { ath_print(common, ATH_DBG_WMI, From d8f996f6ff7e6eab4c7b96e908ba789533595e7d Mon Sep 17 00:00:00 2001 From: Sujith Date: Fri, 23 Apr 2010 10:28:20 +0530 Subject: [PATCH 017/109] ath9k_htc: Really fix device hotunplug All commands to the target are disabled when the device is unplugged, but a normal module unload has to be differentiated from this case, as we could still receive data in the RX endpoint. Fix this by checking if the device is attached or not. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hif_usb.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 49b7a8970ddd..74872ca76f9a 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -922,7 +922,8 @@ static void ath9k_hif_usb_disconnect(struct usb_interface *interface) (struct hif_device_usb *) usb_get_intfdata(interface); if (hif_dev) { - ath9k_htc_hw_deinit(hif_dev->htc_handle, true); + ath9k_htc_hw_deinit(hif_dev->htc_handle, + (udev->state == USB_STATE_NOTATTACHED) ? true : false); ath9k_htc_hw_free(hif_dev->htc_handle); ath9k_hif_usb_dev_deinit(hif_dev); usb_set_intfdata(interface, NULL); From 2caaa5d36ee210919bd0ecc7b2e6648171544e95 Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Fri, 23 Apr 2010 15:05:29 +0200 Subject: [PATCH 018/109] rt2x00: rt2800lib: disable HT40 for now as it causes reception problems Disable HT40 support for now as it causes rx problems with HT40 capable 11n APs (when mac80211 enables HT40, rx is completely disfunctional). Once the rt2800 HT code is capable of using HT40 we should enable the flag again. I only tested this patch with a rt305x SoC device, nevertheless the patch disables HT40 also on PCI and USB rt2800 devices. Signed-off-by: Helmut Schaa Acked-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 638600092f19..867b6527a1fd 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2317,8 +2317,11 @@ int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) else spec->ht.ht_supported = false; + /* + * Don't set IEEE80211_HT_CAP_SUP_WIDTH_20_40 for now as it causes + * reception problems with HT40 capable 11n APs + */ spec->ht.cap = - IEEE80211_HT_CAP_SUP_WIDTH_20_40 | IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40 | From 5a673964266438784b4ebf65ee07970cde61ab5e Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Fri, 23 Apr 2010 15:54:43 +0200 Subject: [PATCH 019/109] rt2x00: rt2800: use tx_power2 in rt2800_config_channel_rf3xxx Get closer to what the ralink driver does by setting the rf register 13 to tx_power2 during channel switch. Signed-off-by: Helmut Schaa Acked-by: Gertjan van Wingerde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800.h | 5 +++++ drivers/net/wireless/rt2x00/rt2800lib.c | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index ec893721cc80..1c59dc6a3aa2 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -1565,6 +1565,11 @@ struct mac_iveiv_entry { */ #define RFCSR12_TX_POWER FIELD8(0x1f) +/* + * RFCSR 13: + */ +#define RFCSR13_TX_POWER FIELD8(0x1f) + /* * RFCSR 15: */ diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 867b6527a1fd..2b9be79fc77f 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -793,6 +793,11 @@ static void rt2800_config_channel_rf3xxx(struct rt2x00_dev *rt2x00dev, TXPOWER_G_TO_DEV(info->tx_power1)); rt2800_rfcsr_write(rt2x00dev, 12, rfcsr); + rt2800_rfcsr_read(rt2x00dev, 13, &rfcsr); + rt2x00_set_field8(&rfcsr, RFCSR13_TX_POWER, + TXPOWER_G_TO_DEV(info->tx_power2)); + rt2800_rfcsr_write(rt2x00dev, 13, rfcsr); + rt2800_rfcsr_read(rt2x00dev, 23, &rfcsr); rt2x00_set_field8(&rfcsr, RFCSR23_FREQ_OFFSET, rt2x00dev->freq_offset); rt2800_rfcsr_write(rt2x00dev, 23, rfcsr); From ce9626eae243b788993fedc03f30e2d1cb178c7a Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 23 Apr 2010 13:17:21 -0500 Subject: [PATCH 020/109] ssb: Make bus registration failure not be silent In kernel Bugzilla #15825, a case where routine ssb_bus_pcibus_register() fails silently is reported. The cause for the failure is still being investigated; however, the diagnosis would be easier if the failure had been reported. Signed-off-by: Larry Finger Signed-off-by: John W. Linville --- drivers/ssb/main.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 03dfd27c4bfb..009e3204caac 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -833,6 +833,9 @@ int ssb_bus_pcibus_register(struct ssb_bus *bus, if (!err) { ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " "PCI device %s\n", dev_name(&host_pci->dev)); + } else { + ssb_printk(KERN_ERR PFX "Failed to register PCI version" + " of SSB with error %d\n", err); } return err; From 0bdab171ec04ea9d26a40608f69350c8c9e4872c Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Mon, 26 Apr 2010 10:18:08 +0200 Subject: [PATCH 021/109] rt2x00: fix typo in rt2800.h Fix a typo in a comment in rt2800.h. Instead of replacing the wrong hexvalue (0x171c) with the correct one (0x1718) just use the appropriate readable define. Signed-off-by: Helmut Schaa Acked-by: Ivo van Doorn Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index 1c59dc6a3aa2..4c0b48173213 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -107,7 +107,7 @@ /* * INT_SOURCE_CSR: Interrupt source register. * Write one to clear corresponding bit. - * TX_FIFO_STATUS: FIFO Statistics is full, sw should read 0x171c + * TX_FIFO_STATUS: FIFO Statistics is full, sw should read TX_STA_FIFO */ #define INT_SOURCE_CSR 0x0200 #define INT_SOURCE_CSR_RXDELAYINT FIELD32(0x00000001) From 23812383c6b03afef44c4aa642500f8235c3d079 Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Mon, 26 Apr 2010 13:48:45 +0200 Subject: [PATCH 022/109] rt2x00: rt2800lib: Fix rx path on SoC devices Restore the rfcsr initialization for RT305x SoC devices which was removed by "rt2x00: Finish rt3070 support in rt2800 register initialization.". This fixes the rx path on SoC devices. Signed-off-by: Helmut Schaa Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 34 ++++++++++++++++++++++++- 1 file changed, 33 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 2b9be79fc77f..adb690174d1d 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -1707,7 +1707,8 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) if (!rt2x00_rt(rt2x00dev, RT3070) && !rt2x00_rt(rt2x00dev, RT3071) && !rt2x00_rt(rt2x00dev, RT3090) && - !rt2x00_rt(rt2x00dev, RT3390)) + !rt2x00_rt(rt2x00dev, RT3390) && + !(rt2x00_is_soc(rt2x00dev) && rt2x00_rt(rt2x00dev, RT2872))) return 0; /* @@ -1775,6 +1776,37 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) rt2800_rfcsr_write(rt2x00dev, 29, 0x8f); rt2800_rfcsr_write(rt2x00dev, 30, 0x20); rt2800_rfcsr_write(rt2x00dev, 31, 0x0f); + } else if (rt2x00_rt(rt2x00dev, RT2872)) { + rt2800_rfcsr_write(rt2x00dev, 0, 0x50); + rt2800_rfcsr_write(rt2x00dev, 1, 0x01); + rt2800_rfcsr_write(rt2x00dev, 2, 0xf7); + rt2800_rfcsr_write(rt2x00dev, 3, 0x75); + rt2800_rfcsr_write(rt2x00dev, 4, 0x40); + rt2800_rfcsr_write(rt2x00dev, 5, 0x03); + rt2800_rfcsr_write(rt2x00dev, 6, 0x02); + rt2800_rfcsr_write(rt2x00dev, 7, 0x50); + rt2800_rfcsr_write(rt2x00dev, 8, 0x39); + rt2800_rfcsr_write(rt2x00dev, 9, 0x0f); + rt2800_rfcsr_write(rt2x00dev, 10, 0x60); + rt2800_rfcsr_write(rt2x00dev, 11, 0x21); + rt2800_rfcsr_write(rt2x00dev, 12, 0x75); + rt2800_rfcsr_write(rt2x00dev, 13, 0x75); + rt2800_rfcsr_write(rt2x00dev, 14, 0x90); + rt2800_rfcsr_write(rt2x00dev, 15, 0x58); + rt2800_rfcsr_write(rt2x00dev, 16, 0xb3); + rt2800_rfcsr_write(rt2x00dev, 17, 0x92); + rt2800_rfcsr_write(rt2x00dev, 18, 0x2c); + rt2800_rfcsr_write(rt2x00dev, 19, 0x02); + rt2800_rfcsr_write(rt2x00dev, 20, 0xba); + rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); + rt2800_rfcsr_write(rt2x00dev, 22, 0x00); + rt2800_rfcsr_write(rt2x00dev, 23, 0x31); + rt2800_rfcsr_write(rt2x00dev, 24, 0x08); + rt2800_rfcsr_write(rt2x00dev, 25, 0x01); + rt2800_rfcsr_write(rt2x00dev, 26, 0x25); + rt2800_rfcsr_write(rt2x00dev, 27, 0x23); + rt2800_rfcsr_write(rt2x00dev, 28, 0x13); + rt2800_rfcsr_write(rt2x00dev, 29, 0x83); } if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) { From 9a8b424ea8b64da83b6868423dcd0f3c259fdde0 Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Mon, 26 Apr 2010 13:50:27 +0200 Subject: [PATCH 023/109] rt2x00: rt2800lib: Remove redundant check for RT2872 Remove redundant check for RT2872. Signed-off-by: Helmut Schaa Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index adb690174d1d..12a49e0c4ac5 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -2022,7 +2022,6 @@ int rt2800_validate_eeprom(struct rt2x00_dev *rt2x00dev) EEPROM(rt2x00dev, "Antenna: 0x%04x\n", word); } else if (rt2x00_rt(rt2x00dev, RT2860) || rt2x00_rt(rt2x00dev, RT2870) || - rt2x00_rt(rt2x00dev, RT2872) || rt2x00_rt(rt2x00dev, RT2872)) { /* * There is a max of 2 RX streams for RT28x0 series From e9bd5bcde7af27ebb92bb866afde5ef5e4f3dc6c Mon Sep 17 00:00:00 2001 From: Steve deRosier Date: Sun, 25 Apr 2010 14:40:46 -0700 Subject: [PATCH 024/109] libertastf: add configurable debug messages Add the same type of configurable debug messages to libertas_tf as already exist in the libertas driver. This has facilitated creation of a interface specification and will facilitate future development of this driver. Signed-off-by: Steve deRosier Signed-off-by: John W. Linville --- drivers/net/wireless/Kconfig | 6 + drivers/net/wireless/libertas_tf/cmd.c | 202 +++++++++++++--- drivers/net/wireless/libertas_tf/deb_defs.h | 106 +++++++++ drivers/net/wireless/libertas_tf/if_usb.c | 250 ++++++++++++++++---- drivers/net/wireless/libertas_tf/main.c | 87 ++++++- 5 files changed, 572 insertions(+), 79 deletions(-) create mode 100644 drivers/net/wireless/libertas_tf/deb_defs.h diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 77500cb7fd26..2fbe9b4506c0 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -38,6 +38,12 @@ config LIBERTAS_THINFIRM ---help--- A library for Marvell Libertas 8xxx devices using thinfirm. +config LIBERTAS_THINFIRM_DEBUG + bool "Enable full debugging output in the Libertas thin firmware module." + depends on LIBERTAS_THINFIRM + ---help--- + Debugging support. + config LIBERTAS_THINFIRM_USB tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware" depends on LIBERTAS_THINFIRM && USB diff --git a/drivers/net/wireless/libertas_tf/cmd.c b/drivers/net/wireless/libertas_tf/cmd.c index 28790e03dc43..22645e4028de 100644 --- a/drivers/net/wireless/libertas_tf/cmd.c +++ b/drivers/net/wireless/libertas_tf/cmd.c @@ -7,6 +7,7 @@ * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. */ +#include "deb_defs.h" #include "libertas_tf.h" static const struct channel_range channel_ranges[] = { @@ -80,6 +81,8 @@ int lbtf_update_hw_spec(struct lbtf_private *priv) int ret = -1; u32 i; + lbtf_deb_enter(LBTF_DEB_CMD); + memset(&cmd, 0, sizeof(cmd)); cmd.hdr.size = cpu_to_le16(sizeof(cmd)); memcpy(cmd.permanentaddr, priv->current_addr, ETH_ALEN); @@ -102,6 +105,8 @@ int lbtf_update_hw_spec(struct lbtf_private *priv) priv->fwrelease >> 8 & 0xff, priv->fwrelease & 0xff, priv->fwcapinfo); + lbtf_deb_cmd("GET_HW_SPEC: hardware interface 0x%x, hardware spec 0x%04x\n", + cmd.hwifversion, cmd.version); /* Clamp region code to 8-bit since FW spec indicates that it should * only ever be 8-bit, even though the field size is 16-bit. Some @@ -116,8 +121,10 @@ int lbtf_update_hw_spec(struct lbtf_private *priv) } /* if it's unidentified region code, use the default (USA) */ - if (i >= MRVDRV_MAX_REGION_CODE) + if (i >= MRVDRV_MAX_REGION_CODE) { priv->regioncode = 0x10; + pr_info("unidentified region code; using the default (USA)\n"); + } if (priv->current_addr[0] == 0xff) memmove(priv->current_addr, cmd.permanentaddr, ETH_ALEN); @@ -126,6 +133,7 @@ int lbtf_update_hw_spec(struct lbtf_private *priv) lbtf_geo_init(priv); out: + lbtf_deb_leave(LBTF_DEB_CMD); return ret; } @@ -139,13 +147,18 @@ out: */ int lbtf_set_channel(struct lbtf_private *priv, u8 channel) { + int ret = 0; struct cmd_ds_802_11_rf_channel cmd; + lbtf_deb_enter(LBTF_DEB_CMD); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); cmd.action = cpu_to_le16(CMD_OPT_802_11_RF_CHANNEL_SET); cmd.channel = cpu_to_le16(channel); - return lbtf_cmd_with_response(priv, CMD_802_11_RF_CHANNEL, &cmd); + ret = lbtf_cmd_with_response(priv, CMD_802_11_RF_CHANNEL, &cmd); + lbtf_deb_leave_args(LBTF_DEB_CMD, "ret %d", ret); + return ret; } int lbtf_beacon_set(struct lbtf_private *priv, struct sk_buff *beacon) @@ -153,20 +166,28 @@ int lbtf_beacon_set(struct lbtf_private *priv, struct sk_buff *beacon) struct cmd_ds_802_11_beacon_set cmd; int size; - if (beacon->len > MRVL_MAX_BCN_SIZE) + lbtf_deb_enter(LBTF_DEB_CMD); + + if (beacon->len > MRVL_MAX_BCN_SIZE) { + lbtf_deb_leave_args(LBTF_DEB_CMD, "ret %d", -1); return -1; + } size = sizeof(cmd) - sizeof(cmd.beacon) + beacon->len; cmd.hdr.size = cpu_to_le16(size); cmd.len = cpu_to_le16(beacon->len); memcpy(cmd.beacon, (u8 *) beacon->data, beacon->len); lbtf_cmd_async(priv, CMD_802_11_BEACON_SET, &cmd.hdr, size); + + lbtf_deb_leave_args(LBTF_DEB_CMD, "ret %d", 0); return 0; } int lbtf_beacon_ctrl(struct lbtf_private *priv, bool beacon_enable, - int beacon_int) { + int beacon_int) +{ struct cmd_ds_802_11_beacon_control cmd; + lbtf_deb_enter(LBTF_DEB_CMD); cmd.hdr.size = cpu_to_le16(sizeof(cmd)); cmd.action = cpu_to_le16(CMD_ACT_SET); @@ -174,6 +195,8 @@ int lbtf_beacon_ctrl(struct lbtf_private *priv, bool beacon_enable, cmd.beacon_period = cpu_to_le16(beacon_int); lbtf_cmd_async(priv, CMD_802_11_BEACON_CTRL, &cmd.hdr, sizeof(cmd)); + + lbtf_deb_leave(LBTF_DEB_CMD); return 0; } @@ -181,17 +204,28 @@ static void lbtf_queue_cmd(struct lbtf_private *priv, struct cmd_ctrl_node *cmdnode) { unsigned long flags; + lbtf_deb_enter(LBTF_DEB_HOST); - if (!cmdnode) - return; + if (!cmdnode) { + lbtf_deb_host("QUEUE_CMD: cmdnode is NULL\n"); + goto qcmd_done; + } - if (!cmdnode->cmdbuf->size) - return; + if (!cmdnode->cmdbuf->size) { + lbtf_deb_host("DNLD_CMD: cmd size is zero\n"); + goto qcmd_done; + } cmdnode->result = 0; spin_lock_irqsave(&priv->driver_lock, flags); list_add_tail(&cmdnode->list, &priv->cmdpendingq); spin_unlock_irqrestore(&priv->driver_lock, flags); + + lbtf_deb_host("QUEUE_CMD: inserted command 0x%04x into cmdpendingq\n", + le16_to_cpu(cmdnode->cmdbuf->command)); + +qcmd_done: + lbtf_deb_leave(LBTF_DEB_HOST); } static void lbtf_submit_command(struct lbtf_private *priv, @@ -204,22 +238,33 @@ static void lbtf_submit_command(struct lbtf_private *priv, int timeo = 5 * HZ; int ret; + lbtf_deb_enter(LBTF_DEB_HOST); + cmd = cmdnode->cmdbuf; spin_lock_irqsave(&priv->driver_lock, flags); priv->cur_cmd = cmdnode; cmdsize = le16_to_cpu(cmd->size); command = le16_to_cpu(cmd->command); + + lbtf_deb_cmd("DNLD_CMD: command 0x%04x, seq %d, size %d\n", + command, le16_to_cpu(cmd->seqnum), cmdsize); + lbtf_deb_hex(LBTF_DEB_CMD, "DNLD_CMD", (void *) cmdnode->cmdbuf, cmdsize); + ret = priv->hw_host_to_card(priv, MVMS_CMD, (u8 *) cmd, cmdsize); spin_unlock_irqrestore(&priv->driver_lock, flags); - if (ret) + if (ret) { + pr_info("DNLD_CMD: hw_host_to_card failed: %d\n", ret); /* Let the timer kick in and retry, and potentially reset the whole thing if the condition persists */ timeo = HZ; + } /* Setup the timer after transmit command */ mod_timer(&priv->command_timer, jiffies + timeo); + + lbtf_deb_leave(LBTF_DEB_HOST); } /** @@ -229,8 +274,10 @@ static void lbtf_submit_command(struct lbtf_private *priv, static void __lbtf_cleanup_and_insert_cmd(struct lbtf_private *priv, struct cmd_ctrl_node *cmdnode) { + lbtf_deb_enter(LBTF_DEB_HOST); + if (!cmdnode) - return; + goto cl_ins_out; cmdnode->callback = NULL; cmdnode->callback_arg = 0; @@ -238,6 +285,9 @@ static void __lbtf_cleanup_and_insert_cmd(struct lbtf_private *priv, memset(cmdnode->cmdbuf, 0, LBS_CMD_BUFFER_SIZE); list_add_tail(&cmdnode->list, &priv->cmdfreeq); + +cl_ins_out: + lbtf_deb_leave(LBTF_DEB_HOST); } static void lbtf_cleanup_and_insert_cmd(struct lbtf_private *priv, @@ -266,29 +316,41 @@ int lbtf_cmd_set_mac_multicast_addr(struct lbtf_private *priv) { struct cmd_ds_mac_multicast_addr cmd; + lbtf_deb_enter(LBTF_DEB_CMD); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); cmd.action = cpu_to_le16(CMD_ACT_SET); cmd.nr_of_adrs = cpu_to_le16((u16) priv->nr_of_multicastmacaddr); + + lbtf_deb_cmd("MULTICAST_ADR: setting %d addresses\n", cmd.nr_of_adrs); + memcpy(cmd.maclist, priv->multicastlist, priv->nr_of_multicastmacaddr * ETH_ALEN); lbtf_cmd_async(priv, CMD_MAC_MULTICAST_ADR, &cmd.hdr, sizeof(cmd)); + + lbtf_deb_leave(LBTF_DEB_CMD); return 0; } void lbtf_set_mode(struct lbtf_private *priv, enum lbtf_mode mode) { struct cmd_ds_set_mode cmd; + lbtf_deb_enter(LBTF_DEB_WEXT); cmd.hdr.size = cpu_to_le16(sizeof(cmd)); cmd.mode = cpu_to_le16(mode); + lbtf_deb_wext("Switching to mode: 0x%x\n", mode); lbtf_cmd_async(priv, CMD_802_11_SET_MODE, &cmd.hdr, sizeof(cmd)); + + lbtf_deb_leave(LBTF_DEB_WEXT); } void lbtf_set_bssid(struct lbtf_private *priv, bool activate, const u8 *bssid) { struct cmd_ds_set_bssid cmd; + lbtf_deb_enter(LBTF_DEB_CMD); cmd.hdr.size = cpu_to_le16(sizeof(cmd)); cmd.activate = activate ? 1 : 0; @@ -296,11 +358,13 @@ void lbtf_set_bssid(struct lbtf_private *priv, bool activate, const u8 *bssid) memcpy(cmd.bssid, bssid, ETH_ALEN); lbtf_cmd_async(priv, CMD_802_11_SET_BSSID, &cmd.hdr, sizeof(cmd)); + lbtf_deb_leave(LBTF_DEB_CMD); } int lbtf_set_mac_address(struct lbtf_private *priv, uint8_t *mac_addr) { struct cmd_ds_802_11_mac_address cmd; + lbtf_deb_enter(LBTF_DEB_CMD); cmd.hdr.size = cpu_to_le16(sizeof(cmd)); cmd.action = cpu_to_le16(CMD_ACT_SET); @@ -308,6 +372,7 @@ int lbtf_set_mac_address(struct lbtf_private *priv, uint8_t *mac_addr) memcpy(cmd.macadd, mac_addr, ETH_ALEN); lbtf_cmd_async(priv, CMD_802_11_MAC_ADDRESS, &cmd.hdr, sizeof(cmd)); + lbtf_deb_leave(LBTF_DEB_CMD); return 0; } @@ -316,6 +381,8 @@ int lbtf_set_radio_control(struct lbtf_private *priv) int ret = 0; struct cmd_ds_802_11_radio_control cmd; + lbtf_deb_enter(LBTF_DEB_CMD); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); cmd.action = cpu_to_le16(CMD_ACT_SET); @@ -339,19 +406,28 @@ int lbtf_set_radio_control(struct lbtf_private *priv) else cmd.control &= cpu_to_le16(~TURN_ON_RF); + lbtf_deb_cmd("RADIO_SET: radio %d, preamble %d\n", priv->radioon, + priv->preamble); + ret = lbtf_cmd_with_response(priv, CMD_802_11_RADIO_CONTROL, &cmd); + + lbtf_deb_leave_args(LBTF_DEB_CMD, "ret %d", ret); return ret; } void lbtf_set_mac_control(struct lbtf_private *priv) { struct cmd_ds_mac_control cmd; + lbtf_deb_enter(LBTF_DEB_CMD); + cmd.hdr.size = cpu_to_le16(sizeof(cmd)); cmd.action = cpu_to_le16(priv->mac_control); cmd.reserved = 0; lbtf_cmd_async(priv, CMD_MAC_CONTROL, &cmd.hdr, sizeof(cmd)); + + lbtf_deb_leave(LBTF_DEB_CMD); } /** @@ -363,29 +439,43 @@ void lbtf_set_mac_control(struct lbtf_private *priv) */ int lbtf_allocate_cmd_buffer(struct lbtf_private *priv) { + int ret = 0; u32 bufsize; u32 i; struct cmd_ctrl_node *cmdarray; + lbtf_deb_enter(LBTF_DEB_HOST); + /* Allocate and initialize the command array */ bufsize = sizeof(struct cmd_ctrl_node) * LBS_NUM_CMD_BUFFERS; cmdarray = kzalloc(bufsize, GFP_KERNEL); - if (!cmdarray) - return -1; + if (!cmdarray) { + lbtf_deb_host("ALLOC_CMD_BUF: tempcmd_array is NULL\n"); + ret = -1; + goto done; + } priv->cmd_array = cmdarray; /* Allocate and initialize each command buffer in the command array */ for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) { cmdarray[i].cmdbuf = kzalloc(LBS_CMD_BUFFER_SIZE, GFP_KERNEL); - if (!cmdarray[i].cmdbuf) - return -1; + if (!cmdarray[i].cmdbuf) { + lbtf_deb_host("ALLOC_CMD_BUF: ptempvirtualaddr is NULL\n"); + ret = -1; + goto done; + } } for (i = 0; i < LBS_NUM_CMD_BUFFERS; i++) { init_waitqueue_head(&cmdarray[i].cmdwait_q); lbtf_cleanup_and_insert_cmd(priv, &cmdarray[i]); } - return 0; + + ret = 0; + +done: + lbtf_deb_leave_args(LBTF_DEB_HOST, "ret %d", ret); + return ret; } /** @@ -400,9 +490,13 @@ int lbtf_free_cmd_buffer(struct lbtf_private *priv) struct cmd_ctrl_node *cmdarray; unsigned int i; + lbtf_deb_enter(LBTF_DEB_HOST); + /* need to check if cmd array is allocated or not */ - if (priv->cmd_array == NULL) - return 0; + if (priv->cmd_array == NULL) { + lbtf_deb_host("FREE_CMD_BUF: cmd_array is NULL\n"); + goto done; + } cmdarray = priv->cmd_array; @@ -416,6 +510,8 @@ int lbtf_free_cmd_buffer(struct lbtf_private *priv) kfree(priv->cmd_array); priv->cmd_array = NULL; +done: + lbtf_deb_leave(LBTF_DEB_HOST); return 0; } @@ -431,6 +527,8 @@ static struct cmd_ctrl_node *lbtf_get_cmd_ctrl_node(struct lbtf_private *priv) struct cmd_ctrl_node *tempnode; unsigned long flags; + lbtf_deb_enter(LBTF_DEB_HOST); + if (!priv) return NULL; @@ -440,11 +538,14 @@ static struct cmd_ctrl_node *lbtf_get_cmd_ctrl_node(struct lbtf_private *priv) tempnode = list_first_entry(&priv->cmdfreeq, struct cmd_ctrl_node, list); list_del(&tempnode->list); - } else + } else { + lbtf_deb_host("GET_CMD_NODE: cmd_ctrl_node is not available\n"); tempnode = NULL; + } spin_unlock_irqrestore(&priv->driver_lock, flags); + lbtf_deb_leave(LBTF_DEB_HOST); return tempnode; } @@ -460,16 +561,20 @@ int lbtf_execute_next_command(struct lbtf_private *priv) struct cmd_ctrl_node *cmdnode = NULL; struct cmd_header *cmd; unsigned long flags; + int ret = 0; - /* Debug group is LBS_DEB_THREAD and not LBS_DEB_HOST, because the + /* Debug group is lbtf_deb_THREAD and not lbtf_deb_HOST, because the * only caller to us is lbtf_thread() and we get even when a * data packet is received */ + lbtf_deb_enter(LBTF_DEB_THREAD); spin_lock_irqsave(&priv->driver_lock, flags); if (priv->cur_cmd) { + pr_alert("EXEC_NEXT_CMD: already processing command!\n"); spin_unlock_irqrestore(&priv->driver_lock, flags); - return -1; + ret = -1; + goto done; } if (!list_empty(&priv->cmdpendingq)) { @@ -481,11 +586,17 @@ int lbtf_execute_next_command(struct lbtf_private *priv) cmd = cmdnode->cmdbuf; list_del(&cmdnode->list); + lbtf_deb_host("EXEC_NEXT_CMD: sending command 0x%04x\n", + le16_to_cpu(cmd->command)); spin_unlock_irqrestore(&priv->driver_lock, flags); lbtf_submit_command(priv, cmdnode); } else spin_unlock_irqrestore(&priv->driver_lock, flags); - return 0; + + ret = 0; +done: + lbtf_deb_leave(LBTF_DEB_THREAD); + return ret; } static struct cmd_ctrl_node *__lbtf_cmd_async(struct lbtf_private *priv, @@ -496,14 +607,22 @@ static struct cmd_ctrl_node *__lbtf_cmd_async(struct lbtf_private *priv, { struct cmd_ctrl_node *cmdnode; - if (priv->surpriseremoved) - return ERR_PTR(-ENOENT); + lbtf_deb_enter(LBTF_DEB_HOST); + + if (priv->surpriseremoved) { + lbtf_deb_host("PREP_CMD: card removed\n"); + cmdnode = ERR_PTR(-ENOENT); + goto done; + } cmdnode = lbtf_get_cmd_ctrl_node(priv); if (cmdnode == NULL) { + lbtf_deb_host("PREP_CMD: cmdnode is NULL\n"); + /* Wake up main thread to execute next command */ queue_work(lbtf_wq, &priv->cmd_work); - return ERR_PTR(-ENOBUFS); + cmdnode = ERR_PTR(-ENOBUFS); + goto done; } cmdnode->callback = callback; @@ -518,17 +637,24 @@ static struct cmd_ctrl_node *__lbtf_cmd_async(struct lbtf_private *priv, cmdnode->cmdbuf->size = cpu_to_le16(in_cmd_size); cmdnode->cmdbuf->seqnum = cpu_to_le16(priv->seqnum); cmdnode->cmdbuf->result = 0; + + lbtf_deb_host("PREP_CMD: command 0x%04x\n", command); + cmdnode->cmdwaitqwoken = 0; lbtf_queue_cmd(priv, cmdnode); queue_work(lbtf_wq, &priv->cmd_work); + done: + lbtf_deb_leave_args(LBTF_DEB_HOST, "ret %p", cmdnode); return cmdnode; } void lbtf_cmd_async(struct lbtf_private *priv, uint16_t command, struct cmd_header *in_cmd, int in_cmd_size) { + lbtf_deb_enter(LBTF_DEB_CMD); __lbtf_cmd_async(priv, command, in_cmd, in_cmd_size, NULL, 0); + lbtf_deb_leave(LBTF_DEB_CMD); } int __lbtf_cmd(struct lbtf_private *priv, uint16_t command, @@ -541,30 +667,35 @@ int __lbtf_cmd(struct lbtf_private *priv, uint16_t command, unsigned long flags; int ret = 0; + lbtf_deb_enter(LBTF_DEB_HOST); + cmdnode = __lbtf_cmd_async(priv, command, in_cmd, in_cmd_size, callback, callback_arg); - if (IS_ERR(cmdnode)) - return PTR_ERR(cmdnode); + if (IS_ERR(cmdnode)) { + ret = PTR_ERR(cmdnode); + goto done; + } might_sleep(); ret = wait_event_interruptible(cmdnode->cmdwait_q, cmdnode->cmdwaitqwoken); - if (ret) { - printk(KERN_DEBUG - "libertastf: command 0x%04x interrupted by signal", - command); - return ret; + if (ret) { + pr_info("PREP_CMD: command 0x%04x interrupted by signal: %d\n", + command, ret); + goto done; } spin_lock_irqsave(&priv->driver_lock, flags); ret = cmdnode->result; if (ret) - printk(KERN_DEBUG "libertastf: command 0x%04x failed: %d\n", + pr_info("PREP_CMD: command 0x%04x failed: %d\n", command, ret); __lbtf_cleanup_and_insert_cmd(priv, cmdnode); spin_unlock_irqrestore(&priv->driver_lock, flags); +done: + lbtf_deb_leave_args(LBTF_DEB_HOST, "ret %d", ret); return ret; } EXPORT_SYMBOL_GPL(__lbtf_cmd); @@ -585,6 +716,8 @@ int lbtf_process_rx_command(struct lbtf_private *priv) unsigned long flags; uint16_t result; + lbtf_deb_enter(LBTF_DEB_CMD); + mutex_lock(&priv->lock); spin_lock_irqsave(&priv->driver_lock, flags); @@ -600,7 +733,7 @@ int lbtf_process_rx_command(struct lbtf_private *priv) result = le16_to_cpu(resp->result); if (net_ratelimit()) - printk(KERN_DEBUG "libertastf: cmd response 0x%04x, seq %d, size %d\n", + pr_info("libertastf: cmd response 0x%04x, seq %d, size %d\n", respcmd, le16_to_cpu(resp->seqnum), le16_to_cpu(resp->size)); @@ -637,7 +770,7 @@ int lbtf_process_rx_command(struct lbtf_private *priv) switch (respcmd) { case CMD_RET(CMD_GET_HW_SPEC): case CMD_RET(CMD_802_11_RESET): - printk(KERN_DEBUG "libertastf: reset failed\n"); + pr_info("libertastf: reset failed\n"); break; } @@ -664,5 +797,6 @@ int lbtf_process_rx_command(struct lbtf_private *priv) done: mutex_unlock(&priv->lock); + lbtf_deb_leave_args(LBTF_DEB_CMD, "ret %d", ret); return ret; } diff --git a/drivers/net/wireless/libertas_tf/deb_defs.h b/drivers/net/wireless/libertas_tf/deb_defs.h new file mode 100644 index 000000000000..9a3e92bec5fd --- /dev/null +++ b/drivers/net/wireless/libertas_tf/deb_defs.h @@ -0,0 +1,106 @@ +/** + * This header file contains global constant/enum definitions, + * global variable declaration. + */ +#ifndef _LBS_DEB_DEFS_H_ +#define _LBS_DEB_EFS_H_ + +#ifndef DRV_NAME +#define DRV_NAME "libertas_tf" +#endif + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include + +#ifdef CONFIG_LIBERTAS_THINFIRM_DEBUG +#define DEBUG +#define PROC_DEBUG +#endif + +#define LBTF_DEB_ENTER 0x00000001 +#define LBTF_DEB_LEAVE 0x00000002 +#define LBTF_DEB_MAIN 0x00000004 +#define LBTF_DEB_NET 0x00000008 +#define LBTF_DEB_MESH 0x00000010 +#define LBTF_DEB_WEXT 0x00000020 +#define LBTF_DEB_IOCTL 0x00000040 +#define LBTF_DEB_SCAN 0x00000080 +#define LBTF_DEB_ASSOC 0x00000100 +#define LBTF_DEB_JOIN 0x00000200 +#define LBTF_DEB_11D 0x00000400 +#define LBTF_DEB_DEBUGFS 0x00000800 +#define LBTF_DEB_ETHTOOL 0x00001000 +#define LBTF_DEB_HOST 0x00002000 +#define LBTF_DEB_CMD 0x00004000 +#define LBTF_DEB_RX 0x00008000 +#define LBTF_DEB_TX 0x00010000 +#define LBTF_DEB_USB 0x00020000 +#define LBTF_DEB_CS 0x00040000 +#define LBTF_DEB_FW 0x00080000 +#define LBTF_DEB_THREAD 0x00100000 +#define LBTF_DEB_HEX 0x00200000 +#define LBTF_DEB_SDIO 0x00400000 +#define LBTF_DEB_MACOPS 0x00800000 + +extern unsigned int lbtf_debug; + + +#ifdef DEBUG +#define LBTF_DEB_LL(grp, grpnam, fmt, args...) \ +do { if ((lbtf_debug & (grp)) == (grp)) \ + printk(KERN_DEBUG DRV_NAME grpnam "%s: " fmt, \ + in_interrupt() ? " (INT)" : "", ## args); } while (0) +#else +#define LBTF_DEB_LL(grp, grpnam, fmt, args...) do {} while (0) +#endif + +#define lbtf_deb_enter(grp) \ + LBTF_DEB_LL(grp | LBTF_DEB_ENTER, " enter", "%s()\n", __func__); +#define lbtf_deb_enter_args(grp, fmt, args...) \ + LBTF_DEB_LL(grp | LBTF_DEB_ENTER, " enter", "%s(" fmt ")\n", __func__, ## args); +#define lbtf_deb_leave(grp) \ + LBTF_DEB_LL(grp | LBTF_DEB_LEAVE, " leave", "%s()\n", __func__); +#define lbtf_deb_leave_args(grp, fmt, args...) \ + LBTF_DEB_LL(grp | LBTF_DEB_LEAVE, " leave", "%s(), " fmt "\n", \ + __func__, ##args); +#define lbtf_deb_main(fmt, args...) LBTF_DEB_LL(LBTF_DEB_MAIN, " main", fmt, ##args) +#define lbtf_deb_net(fmt, args...) LBTF_DEB_LL(LBTF_DEB_NET, " net", fmt, ##args) +#define lbtf_deb_mesh(fmt, args...) LBTF_DEB_LL(LBTF_DEB_MESH, " mesh", fmt, ##args) +#define lbtf_deb_wext(fmt, args...) LBTF_DEB_LL(LBTF_DEB_WEXT, " wext", fmt, ##args) +#define lbtf_deb_ioctl(fmt, args...) LBTF_DEB_LL(LBTF_DEB_IOCTL, " ioctl", fmt, ##args) +#define lbtf_deb_scan(fmt, args...) LBTF_DEB_LL(LBTF_DEB_SCAN, " scan", fmt, ##args) +#define lbtf_deb_assoc(fmt, args...) LBTF_DEB_LL(LBTF_DEB_ASSOC, " assoc", fmt, ##args) +#define lbtf_deb_join(fmt, args...) LBTF_DEB_LL(LBTF_DEB_JOIN, " join", fmt, ##args) +#define lbtf_deb_11d(fmt, args...) LBTF_DEB_LL(LBTF_DEB_11D, " 11d", fmt, ##args) +#define lbtf_deb_debugfs(fmt, args...) LBTF_DEB_LL(LBTF_DEB_DEBUGFS, " debugfs", fmt, ##args) +#define lbtf_deb_ethtool(fmt, args...) LBTF_DEB_LL(LBTF_DEB_ETHTOOL, " ethtool", fmt, ##args) +#define lbtf_deb_host(fmt, args...) LBTF_DEB_LL(LBTF_DEB_HOST, " host", fmt, ##args) +#define lbtf_deb_cmd(fmt, args...) LBTF_DEB_LL(LBTF_DEB_CMD, " cmd", fmt, ##args) +#define lbtf_deb_rx(fmt, args...) LBTF_DEB_LL(LBTF_DEB_RX, " rx", fmt, ##args) +#define lbtf_deb_tx(fmt, args...) LBTF_DEB_LL(LBTF_DEB_TX, " tx", fmt, ##args) +#define lbtf_deb_fw(fmt, args...) LBTF_DEB_LL(LBTF_DEB_FW, " fw", fmt, ##args) +#define lbtf_deb_usb(fmt, args...) LBTF_DEB_LL(LBTF_DEB_USB, " usb", fmt, ##args) +#define lbtf_deb_usbd(dev, fmt, args...) LBTF_DEB_LL(LBTF_DEB_USB, " usbd", "%s:" fmt, dev_name(dev), ##args) +#define lbtf_deb_cs(fmt, args...) LBTF_DEB_LL(LBTF_DEB_CS, " cs", fmt, ##args) +#define lbtf_deb_thread(fmt, args...) LBTF_DEB_LL(LBTF_DEB_THREAD, " thread", fmt, ##args) +#define lbtf_deb_sdio(fmt, args...) LBTF_DEB_LL(LBTF_DEB_SDIO, " thread", fmt, ##args) +#define lbtf_deb_macops(fmt, args...) LBTF_DEB_LL(LBTF_DEB_MACOPS, " thread", fmt, ##args) + +#ifdef DEBUG +static inline void lbtf_deb_hex(unsigned int grp, const char *prompt, u8 *buf, int len) +{ + char newprompt[32]; + + if (len && + (lbtf_debug & LBTF_DEB_HEX) && + (lbtf_debug & grp)) { + snprintf(newprompt, sizeof(newprompt), DRV_NAME " %s: ", prompt); + print_hex_dump_bytes(prompt, DUMP_PREFIX_NONE, buf, len); + } +} +#else +#define lbtf_deb_hex(grp, prompt, buf, len) do {} while (0) +#endif + +#endif diff --git a/drivers/net/wireless/libertas_tf/if_usb.c b/drivers/net/wireless/libertas_tf/if_usb.c index 3691c307e674..919451a2ee4a 100644 --- a/drivers/net/wireless/libertas_tf/if_usb.c +++ b/drivers/net/wireless/libertas_tf/if_usb.c @@ -7,16 +7,20 @@ * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. */ +#define DRV_NAME "lbtf_usb" + +#include "deb_defs.h" +#include "libertas_tf.h" +#include "if_usb.h" + #include #include #include #include #include -#define DRV_NAME "lbtf_usb" - -#include "libertas_tf.h" -#include "if_usb.h" +#define INSANEDEBUG 0 +#define lbtf_deb_usb2(...) do { if (INSANEDEBUG) lbtf_deb_usbd(__VA_ARGS__); } while (0) #define MESSAGE_HEADER_LEN 4 @@ -52,9 +56,14 @@ static int if_usb_reset_device(struct if_usb_card *cardp); */ static void if_usb_write_bulk_callback(struct urb *urb) { - if (urb->status != 0) - printk(KERN_INFO "libertastf: URB in failure status: %d\n", - urb->status); + if (urb->status != 0) { + /* print the failure status number for debug */ + pr_info("URB in failure status: %d\n", urb->status); + } else { + lbtf_deb_usb2(&urb->dev->dev, "URB status is successful\n"); + lbtf_deb_usb2(&urb->dev->dev, "Actual length transmitted %d\n", + urb->actual_length); + } } /** @@ -64,6 +73,8 @@ static void if_usb_write_bulk_callback(struct urb *urb) */ static void if_usb_free(struct if_usb_card *cardp) { + lbtf_deb_enter(LBTF_DEB_USB); + /* Unlink tx & rx urb */ usb_kill_urb(cardp->tx_urb); usb_kill_urb(cardp->rx_urb); @@ -80,6 +91,8 @@ static void if_usb_free(struct if_usb_card *cardp) kfree(cardp->ep_out_buf); cardp->ep_out_buf = NULL; + + lbtf_deb_leave(LBTF_DEB_USB); } static void if_usb_setup_firmware(struct lbtf_private *priv) @@ -87,23 +100,33 @@ static void if_usb_setup_firmware(struct lbtf_private *priv) struct if_usb_card *cardp = priv->card; struct cmd_ds_set_boot2_ver b2_cmd; + lbtf_deb_enter(LBTF_DEB_USB); + if_usb_submit_rx_urb(cardp); b2_cmd.hdr.size = cpu_to_le16(sizeof(b2_cmd)); b2_cmd.action = 0; b2_cmd.version = cardp->boot2_version; if (lbtf_cmd_with_response(priv, CMD_SET_BOOT2_VER, &b2_cmd)) - printk(KERN_INFO "libertastf: setting boot2 version failed\n"); + lbtf_deb_usb("Setting boot2 version failed\n"); + + lbtf_deb_leave(LBTF_DEB_USB); } static void if_usb_fw_timeo(unsigned long priv) { struct if_usb_card *cardp = (void *)priv; - if (!cardp->fwdnldover) + lbtf_deb_enter(LBTF_DEB_USB); + if (!cardp->fwdnldover) { /* Download timed out */ cardp->priv->surpriseremoved = 1; + pr_err("Download timed out\n"); + } else { + lbtf_deb_usb("Download complete, no event. Assuming success\n"); + } wake_up(&cardp->fw_wq); + lbtf_deb_leave(LBTF_DEB_USB); } /** @@ -124,11 +147,14 @@ static int if_usb_probe(struct usb_interface *intf, struct if_usb_card *cardp; int i; + lbtf_deb_enter(LBTF_DEB_USB); udev = interface_to_usbdev(intf); cardp = kzalloc(sizeof(struct if_usb_card), GFP_KERNEL); - if (!cardp) + if (!cardp) { + pr_err("Out of memory allocating private data.\n"); goto error; + } setup_timer(&cardp->fw_timeout, if_usb_fw_timeo, (unsigned long)cardp); init_waitqueue_head(&cardp->fw_wq); @@ -136,38 +162,62 @@ static int if_usb_probe(struct usb_interface *intf, cardp->udev = udev; iface_desc = intf->cur_altsetting; + lbtf_deb_usbd(&udev->dev, "bcdUSB = 0x%X bDeviceClass = 0x%X" + " bDeviceSubClass = 0x%X, bDeviceProtocol = 0x%X\n", + le16_to_cpu(udev->descriptor.bcdUSB), + udev->descriptor.bDeviceClass, + udev->descriptor.bDeviceSubClass, + udev->descriptor.bDeviceProtocol); + for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) { endpoint = &iface_desc->endpoint[i].desc; if (usb_endpoint_is_bulk_in(endpoint)) { cardp->ep_in_size = le16_to_cpu(endpoint->wMaxPacketSize); cardp->ep_in = usb_endpoint_num(endpoint); + + lbtf_deb_usbd(&udev->dev, "in_endpoint = %d\n", cardp->ep_in); + lbtf_deb_usbd(&udev->dev, "Bulk in size is %d\n", cardp->ep_in_size); } else if (usb_endpoint_is_bulk_out(endpoint)) { cardp->ep_out_size = le16_to_cpu(endpoint->wMaxPacketSize); cardp->ep_out = usb_endpoint_num(endpoint); + + lbtf_deb_usbd(&udev->dev, "out_endpoint = %d\n", cardp->ep_out); + lbtf_deb_usbd(&udev->dev, "Bulk out size is %d\n", + cardp->ep_out_size); } } - if (!cardp->ep_out_size || !cardp->ep_in_size) + if (!cardp->ep_out_size || !cardp->ep_in_size) { + lbtf_deb_usbd(&udev->dev, "Endpoints not found\n"); /* Endpoints not found */ goto dealloc; + } cardp->rx_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!cardp->rx_urb) + if (!cardp->rx_urb) { + lbtf_deb_usbd(&udev->dev, "Rx URB allocation failed\n"); goto dealloc; + } cardp->tx_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!cardp->tx_urb) + if (!cardp->tx_urb) { + lbtf_deb_usbd(&udev->dev, "Tx URB allocation failed\n"); goto dealloc; + } cardp->cmd_urb = usb_alloc_urb(0, GFP_KERNEL); - if (!cardp->cmd_urb) + if (!cardp->cmd_urb) { + lbtf_deb_usbd(&udev->dev, "Cmd URB allocation failed\n"); goto dealloc; + } cardp->ep_out_buf = kmalloc(MRVDRV_ETH_TX_PACKET_BUFFER_SIZE, GFP_KERNEL); - if (!cardp->ep_out_buf) + if (!cardp->ep_out_buf) { + lbtf_deb_usbd(&udev->dev, "Could not allocate buffer\n"); goto dealloc; + } priv = lbtf_add_card(cardp, &udev->dev); if (!priv) @@ -188,6 +238,7 @@ static int if_usb_probe(struct usb_interface *intf, dealloc: if_usb_free(cardp); error: +lbtf_deb_leave(LBTF_DEB_MAIN); return -ENOMEM; } @@ -201,6 +252,8 @@ static void if_usb_disconnect(struct usb_interface *intf) struct if_usb_card *cardp = usb_get_intfdata(intf); struct lbtf_private *priv = (struct lbtf_private *) cardp->priv; + lbtf_deb_enter(LBTF_DEB_MAIN); + if_usb_reset_device(cardp); if (priv) @@ -211,6 +264,8 @@ static void if_usb_disconnect(struct usb_interface *intf) usb_set_intfdata(intf, NULL); usb_put_dev(interface_to_usbdev(intf)); + + lbtf_deb_leave(LBTF_DEB_MAIN); } /** @@ -225,6 +280,8 @@ static int if_usb_send_fw_pkt(struct if_usb_card *cardp) struct fwdata *fwdata = cardp->ep_out_buf; u8 *firmware = (u8 *) cardp->fw->data; + lbtf_deb_enter(LBTF_DEB_FW); + /* If we got a CRC failure on the last block, back up and retry it */ if (!cardp->CRC_OK) { @@ -232,6 +289,9 @@ static int if_usb_send_fw_pkt(struct if_usb_card *cardp) cardp->fwseqnum--; } + lbtf_deb_usb2(&cardp->udev->dev, "totalbytes = %d\n", + cardp->totalbytes); + /* struct fwdata (which we sent to the card) has an extra __le32 field in between the header and the data, which is not in the struct fwheader in the actual @@ -245,18 +305,33 @@ static int if_usb_send_fw_pkt(struct if_usb_card *cardp) memcpy(fwdata->data, &firmware[cardp->totalbytes], le32_to_cpu(fwdata->hdr.datalength)); + lbtf_deb_usb2(&cardp->udev->dev, "Data length = %d\n", + le32_to_cpu(fwdata->hdr.datalength)); + fwdata->seqnum = cpu_to_le32(++cardp->fwseqnum); cardp->totalbytes += le32_to_cpu(fwdata->hdr.datalength); usb_tx_block(cardp, cardp->ep_out_buf, sizeof(struct fwdata) + le32_to_cpu(fwdata->hdr.datalength), 0); - if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_LAST_BLOCK)) + if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_DATA_TO_RECV)) { + lbtf_deb_usb2(&cardp->udev->dev, "There are data to follow\n"); + lbtf_deb_usb2(&cardp->udev->dev, "seqnum = %d totalbytes = %d\n", + cardp->fwseqnum, cardp->totalbytes); + } else if (fwdata->hdr.dnldcmd == cpu_to_le32(FW_HAS_LAST_BLOCK)) { + lbtf_deb_usb2(&cardp->udev->dev, "Host has finished FW downloading\n"); + lbtf_deb_usb2(&cardp->udev->dev, "Donwloading FW JUMP BLOCK\n"); + /* Host has finished FW downloading * Donwloading FW JUMP BLOCK */ cardp->fwfinalblk = 1; + } + lbtf_deb_usb2(&cardp->udev->dev, "Firmware download done; size %d\n", + cardp->totalbytes); + + lbtf_deb_leave(LBTF_DEB_FW); return 0; } @@ -265,6 +340,8 @@ static int if_usb_reset_device(struct if_usb_card *cardp) struct cmd_ds_802_11_reset *cmd = cardp->ep_out_buf + 4; int ret; + lbtf_deb_enter(LBTF_DEB_USB); + *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST); cmd->hdr.command = cpu_to_le16(CMD_802_11_RESET); @@ -279,6 +356,8 @@ static int if_usb_reset_device(struct if_usb_card *cardp) ret = usb_reset_device(cardp->udev); msleep(100); + lbtf_deb_leave_args(LBTF_DEB_USB, "ret %d", ret); + return ret; } EXPORT_SYMBOL_GPL(if_usb_reset_device); @@ -296,11 +375,15 @@ EXPORT_SYMBOL_GPL(if_usb_reset_device); static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, uint16_t nb, u8 data) { + int ret = -1; struct urb *urb; + lbtf_deb_enter(LBTF_DEB_USB); /* check if device is removed */ - if (cardp->priv->surpriseremoved) - return -1; + if (cardp->priv->surpriseremoved) { + lbtf_deb_usbd(&cardp->udev->dev, "Device removed\n"); + goto tx_ret; + } if (data) urb = cardp->tx_urb; @@ -314,19 +397,34 @@ static int usb_tx_block(struct if_usb_card *cardp, uint8_t *payload, urb->transfer_flags |= URB_ZERO_PACKET; - if (usb_submit_urb(urb, GFP_ATOMIC)) - return -1; - return 0; + if (usb_submit_urb(urb, GFP_ATOMIC)) { + lbtf_deb_usbd(&cardp->udev->dev, "usb_submit_urb failed: %d\n", ret); + goto tx_ret; + } + + lbtf_deb_usb2(&cardp->udev->dev, "usb_submit_urb success\n"); + + ret = 0; + +tx_ret: + lbtf_deb_leave(LBTF_DEB_USB); + return ret; } static int __if_usb_submit_rx_urb(struct if_usb_card *cardp, void (*callbackfn)(struct urb *urb)) { struct sk_buff *skb; + int ret = -1; + + lbtf_deb_enter(LBTF_DEB_USB); skb = dev_alloc_skb(MRVDRV_ETH_RX_PACKET_BUFFER_SIZE); - if (!skb) + if (!skb) { + pr_err("No free skb\n"); + lbtf_deb_leave(LBTF_DEB_USB); return -1; + } cardp->rx_skb = skb; @@ -338,12 +436,19 @@ static int __if_usb_submit_rx_urb(struct if_usb_card *cardp, cardp->rx_urb->transfer_flags |= URB_ZERO_PACKET; - if (usb_submit_urb(cardp->rx_urb, GFP_ATOMIC)) { + lbtf_deb_usb2(&cardp->udev->dev, "Pointer for rx_urb %p\n", cardp->rx_urb); + ret = usb_submit_urb(cardp->rx_urb, GFP_ATOMIC); + if (ret) { + lbtf_deb_usbd(&cardp->udev->dev, "Submit Rx URB failed: %d\n", ret); kfree_skb(skb); cardp->rx_skb = NULL; + lbtf_deb_leave(LBTF_DEB_USB); return -1; - } else + } else { + lbtf_deb_usb2(&cardp->udev->dev, "Submit Rx URB success\n"); + lbtf_deb_leave(LBTF_DEB_USB); return 0; + } } static int if_usb_submit_rx_urb_fwload(struct if_usb_card *cardp) @@ -363,8 +468,12 @@ static void if_usb_receive_fwload(struct urb *urb) struct fwsyncheader *syncfwheader; struct bootcmdresp bcmdresp; + lbtf_deb_enter(LBTF_DEB_USB); if (urb->status) { + lbtf_deb_usbd(&cardp->udev->dev, + "URB status is failed during fw load\n"); kfree_skb(skb); + lbtf_deb_leave(LBTF_DEB_USB); return; } @@ -372,12 +481,17 @@ static void if_usb_receive_fwload(struct urb *urb) __le32 *tmp = (__le32 *)(skb->data); if (tmp[0] == cpu_to_le32(CMD_TYPE_INDICATION) && - tmp[1] == cpu_to_le32(MACREG_INT_CODE_FIRMWARE_READY)) + tmp[1] == cpu_to_le32(MACREG_INT_CODE_FIRMWARE_READY)) { /* Firmware ready event received */ + pr_info("Firmware ready event received\n"); wake_up(&cardp->fw_wq); - else + } else { + lbtf_deb_usb("Waiting for confirmation; got %x %x\n", + le32_to_cpu(tmp[0]), le32_to_cpu(tmp[1])); if_usb_submit_rx_urb_fwload(cardp); + } kfree_skb(skb); + lbtf_deb_leave(LBTF_DEB_USB); return; } if (cardp->bootcmdresp <= 0) { @@ -388,34 +502,60 @@ static void if_usb_receive_fwload(struct urb *urb) if_usb_submit_rx_urb_fwload(cardp); cardp->bootcmdresp = 1; /* Received valid boot command response */ + lbtf_deb_usbd(&cardp->udev->dev, + "Received valid boot command response\n"); + lbtf_deb_leave(LBTF_DEB_USB); return; } if (bcmdresp.magic != cpu_to_le32(BOOT_CMD_MAGIC_NUMBER)) { if (bcmdresp.magic == cpu_to_le32(CMD_TYPE_REQUEST) || bcmdresp.magic == cpu_to_le32(CMD_TYPE_DATA) || - bcmdresp.magic == cpu_to_le32(CMD_TYPE_INDICATION)) + bcmdresp.magic == cpu_to_le32(CMD_TYPE_INDICATION)) { + if (!cardp->bootcmdresp) + pr_info("Firmware already seems alive; resetting\n"); cardp->bootcmdresp = -1; - } else if (bcmdresp.cmd == BOOT_CMD_FW_BY_USB && - bcmdresp.result == BOOT_CMD_RESP_OK) + } else { + pr_info("boot cmd response wrong magic number (0x%x)\n", + le32_to_cpu(bcmdresp.magic)); + } + } else if (bcmdresp.cmd != BOOT_CMD_FW_BY_USB) { + pr_info("boot cmd response cmd_tag error (%d)\n", + bcmdresp.cmd); + } else if (bcmdresp.result != BOOT_CMD_RESP_OK) { + pr_info("boot cmd response result error (%d)\n", + bcmdresp.result); + } else { cardp->bootcmdresp = 1; + lbtf_deb_usbd(&cardp->udev->dev, + "Received valid boot command response\n"); + } kfree_skb(skb); if_usb_submit_rx_urb_fwload(cardp); + lbtf_deb_leave(LBTF_DEB_USB); return; } syncfwheader = kmalloc(sizeof(struct fwsyncheader), GFP_ATOMIC); if (!syncfwheader) { + lbtf_deb_usbd(&cardp->udev->dev, "Failure to allocate syncfwheader\n"); kfree_skb(skb); + lbtf_deb_leave(LBTF_DEB_USB); return; } memcpy(syncfwheader, skb->data, sizeof(struct fwsyncheader)); - if (!syncfwheader->cmd) + if (!syncfwheader->cmd) { + lbtf_deb_usb2(&cardp->udev->dev, "FW received Blk with correct CRC\n"); + lbtf_deb_usb2(&cardp->udev->dev, "FW received Blk seqnum = %d\n", + le32_to_cpu(syncfwheader->seqnum)); cardp->CRC_OK = 1; - else + } else { + lbtf_deb_usbd(&cardp->udev->dev, "FW received Blk with CRC error\n"); cardp->CRC_OK = 0; + } + kfree_skb(skb); /* reschedule timer for 200ms hence */ @@ -433,6 +573,7 @@ static void if_usb_receive_fwload(struct urb *urb) kfree(syncfwheader); + lbtf_deb_leave(LBTF_DEB_USB); return; } @@ -444,6 +585,7 @@ static inline void process_cmdtypedata(int recvlength, struct sk_buff *skb, { if (recvlength > MRVDRV_ETH_RX_PACKET_BUFFER_SIZE + MESSAGE_HEADER_LEN || recvlength < MRVDRV_MIN_PKT_LEN) { + lbtf_deb_usbd(&cardp->udev->dev, "Packet length is Invalid\n"); kfree_skb(skb); return; } @@ -459,6 +601,8 @@ static inline void process_cmdrequest(int recvlength, uint8_t *recvbuff, struct lbtf_private *priv) { if (recvlength > LBS_CMD_BUFFER_SIZE) { + lbtf_deb_usbd(&cardp->udev->dev, + "The receive buffer is too large\n"); kfree_skb(skb); return; } @@ -488,16 +632,24 @@ static void if_usb_receive(struct urb *urb) uint32_t recvtype = 0; __le32 *pkt = (__le32 *) skb->data; + lbtf_deb_enter(LBTF_DEB_USB); + if (recvlength) { if (urb->status) { + lbtf_deb_usbd(&cardp->udev->dev, "RX URB failed: %d\n", + urb->status); kfree_skb(skb); goto setup_for_next; } recvbuff = skb->data; recvtype = le32_to_cpu(pkt[0]); + lbtf_deb_usbd(&cardp->udev->dev, + "Recv length = 0x%x, Recv type = 0x%X\n", + recvlength, recvtype); } else if (urb->status) { kfree_skb(skb); + lbtf_deb_leave(LBTF_DEB_USB); return; } @@ -514,6 +666,7 @@ static void if_usb_receive(struct urb *urb) { /* Event cause handling */ u32 event_cause = le32_to_cpu(pkt[1]); + lbtf_deb_usbd(&cardp->udev->dev, "**EVENT** 0x%X\n", event_cause); /* Icky undocumented magic special case */ if (event_cause & 0xffff0000) { @@ -528,21 +681,22 @@ static void if_usb_receive(struct urb *urb) } else if (event_cause == LBTF_EVENT_BCN_SENT) lbtf_bcn_sent(priv); else - printk(KERN_DEBUG + lbtf_deb_usbd(&cardp->udev->dev, "Unsupported notification %d received\n", event_cause); kfree_skb(skb); break; } default: - printk(KERN_DEBUG "libertastf: unknown command type 0x%X\n", - recvtype); + lbtf_deb_usbd(&cardp->udev->dev, + "libertastf: unknown command type 0x%X\n", recvtype); kfree_skb(skb); break; } setup_for_next: if_usb_submit_rx_urb(cardp); + lbtf_deb_leave(LBTF_DEB_USB); } /** @@ -561,6 +715,9 @@ static int if_usb_host_to_card(struct lbtf_private *priv, uint8_t type, struct if_usb_card *cardp = priv->card; u8 data = 0; + lbtf_deb_usbd(&cardp->udev->dev, "*** type = %u\n", type); + lbtf_deb_usbd(&cardp->udev->dev, "size after = %d\n", nb); + if (type == MVMS_CMD) { *(__le32 *)cardp->ep_out_buf = cpu_to_le32(CMD_TYPE_REQUEST); } else { @@ -638,8 +795,10 @@ static int check_fwfile_format(const u8 *data, u32 totlen) } while (!exit); if (ret) - printk(KERN_INFO - "libertastf: firmware file format check failed\n"); + pr_err("firmware file format check FAIL\n"); + else + lbtf_deb_fw("firmware file format check PASS\n"); + return ret; } @@ -650,10 +809,12 @@ static int if_usb_prog_firmware(struct if_usb_card *cardp) static int reset_count = 10; int ret = 0; + lbtf_deb_enter(LBTF_DEB_USB); + ret = request_firmware(&cardp->fw, lbtf_fw_name, &cardp->udev->dev); if (ret < 0) { - printk(KERN_INFO "libertastf: firmware %s not found\n", - lbtf_fw_name); + pr_err("request_firmware() failed with %#x\n", ret); + pr_err("firmware %s not found\n", lbtf_fw_name); goto done; } @@ -662,6 +823,7 @@ static int if_usb_prog_firmware(struct if_usb_card *cardp) restart: if (if_usb_submit_rx_urb_fwload(cardp) < 0) { + lbtf_deb_usbd(&cardp->udev->dev, "URB submission is failed\n"); ret = -1; goto release_fw; } @@ -708,14 +870,13 @@ restart: usb_kill_urb(cardp->rx_urb); if (!cardp->fwdnldover) { - printk(KERN_INFO "libertastf: failed to load fw," - " resetting device!\n"); + pr_info("failed to load fw, resetting device!\n"); if (--reset_count >= 0) { if_usb_reset_device(cardp); goto restart; } - printk(KERN_INFO "libertastf: fw download failure\n"); + pr_info("FW download failure, time = %d ms\n", i * 100); ret = -1; goto release_fw; } @@ -729,6 +890,7 @@ restart: if_usb_setup_firmware(cardp->priv); done: + lbtf_deb_leave_args(LBTF_DEB_USB, "ret %d", ret); return ret; } EXPORT_SYMBOL_GPL(if_usb_prog_firmware); @@ -750,13 +912,19 @@ static int __init if_usb_init_module(void) { int ret = 0; + lbtf_deb_enter(LBTF_DEB_MAIN); + ret = usb_register(&if_usb_driver); + + lbtf_deb_leave_args(LBTF_DEB_MAIN, "ret %d", ret); return ret; } static void __exit if_usb_exit_module(void) { + lbtf_deb_enter(LBTF_DEB_MAIN); usb_deregister(&if_usb_driver); + lbtf_deb_leave(LBTF_DEB_MAIN); } module_init(if_usb_init_module); diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c index 6ab30033c26c..3b1db84addb5 100644 --- a/drivers/net/wireless/libertas_tf/main.c +++ b/drivers/net/wireless/libertas_tf/main.c @@ -7,6 +7,7 @@ * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. */ +#include "deb_defs.h" #include "libertas_tf.h" #include "linux/etherdevice.h" @@ -16,7 +17,17 @@ #define LBTF_FW_VER_MAX 0x0584ffff #define QOS_CONTROL_LEN 2 -static const char lbtf_driver_version[] = "THINFIRM-USB8388-" DRIVER_RELEASE_VERSION; +/* Module parameters */ +unsigned int lbtf_debug; +EXPORT_SYMBOL_GPL(lbtf_debug); +module_param_named(libertas_tf_debug, lbtf_debug, int, 0644); + +static const char lbtf_driver_version[] = "THINFIRM-USB8388-" DRIVER_RELEASE_VERSION +#ifdef DEBUG + "-dbg" +#endif + ""; + struct workqueue_struct *lbtf_wq; static const struct ieee80211_channel lbtf_channels[] = { @@ -79,6 +90,9 @@ static void lbtf_cmd_work(struct work_struct *work) { struct lbtf_private *priv = container_of(work, struct lbtf_private, cmd_work); + + lbtf_deb_enter(LBTF_DEB_CMD); + spin_lock_irq(&priv->driver_lock); /* command response? */ if (priv->cmd_response_rxed) { @@ -106,11 +120,16 @@ static void lbtf_cmd_work(struct work_struct *work) priv->cmd_timed_out = 0; spin_unlock_irq(&priv->driver_lock); - if (!priv->fw_ready) + if (!priv->fw_ready) { + lbtf_deb_leave_args(LBTF_DEB_CMD, "fw not ready"); return; + } + /* Execute the next command */ if (!priv->cur_cmd) lbtf_execute_next_command(priv); + + lbtf_deb_leave(LBTF_DEB_CMD); } /** @@ -124,6 +143,7 @@ static int lbtf_setup_firmware(struct lbtf_private *priv) { int ret = -1; + lbtf_deb_enter(LBTF_DEB_FW); /* * Read priv address from HW */ @@ -139,6 +159,7 @@ static int lbtf_setup_firmware(struct lbtf_private *priv) ret = 0; done: + lbtf_deb_leave_args(LBTF_DEB_FW, "ret: %d", ret); return ret; } @@ -150,6 +171,7 @@ static void command_timer_fn(unsigned long data) { struct lbtf_private *priv = (struct lbtf_private *)data; unsigned long flags; + lbtf_deb_enter(LBTF_DEB_CMD); spin_lock_irqsave(&priv->driver_lock, flags); @@ -166,10 +188,12 @@ static void command_timer_fn(unsigned long data) queue_work(lbtf_wq, &priv->cmd_work); out: spin_unlock_irqrestore(&priv->driver_lock, flags); + lbtf_deb_leave(LBTF_DEB_CMD); } static int lbtf_init_adapter(struct lbtf_private *priv) { + lbtf_deb_enter(LBTF_DEB_MAIN); memset(priv->current_addr, 0xff, ETH_ALEN); mutex_init(&priv->lock); @@ -186,13 +210,16 @@ static int lbtf_init_adapter(struct lbtf_private *priv) if (lbtf_allocate_cmd_buffer(priv)) return -1; + lbtf_deb_leave(LBTF_DEB_MAIN); return 0; } static void lbtf_free_adapter(struct lbtf_private *priv) { + lbtf_deb_enter(LBTF_DEB_MAIN); lbtf_free_cmd_buffer(priv); del_timer(&priv->command_timer); + lbtf_deb_leave(LBTF_DEB_MAIN); } static int lbtf_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) @@ -219,14 +246,18 @@ static void lbtf_tx_work(struct work_struct *work) struct sk_buff *skb = NULL; int err; + lbtf_deb_enter(LBTF_DEB_MACOPS | LBTF_DEB_TX); + if ((priv->vif->type == NL80211_IFTYPE_AP) && (!skb_queue_empty(&priv->bc_ps_buf))) skb = skb_dequeue(&priv->bc_ps_buf); else if (priv->skb_to_tx) { skb = priv->skb_to_tx; priv->skb_to_tx = NULL; - } else + } else { + lbtf_deb_leave(LBTF_DEB_MACOPS | LBTF_DEB_TX); return; + } len = skb->len; info = IEEE80211_SKB_CB(skb); @@ -234,6 +265,7 @@ static void lbtf_tx_work(struct work_struct *work) if (priv->surpriseremoved) { dev_kfree_skb_any(skb); + lbtf_deb_leave(LBTF_DEB_MACOPS | LBTF_DEB_TX); return; } @@ -247,6 +279,7 @@ static void lbtf_tx_work(struct work_struct *work) ETH_ALEN); txpd->tx_packet_length = cpu_to_le16(len); txpd->tx_packet_location = cpu_to_le32(sizeof(struct txpd)); + lbtf_deb_hex(LBTF_DEB_TX, "TX Data", skb->data, min_t(unsigned int, skb->len, 100)); BUG_ON(priv->tx_skb); spin_lock_irq(&priv->driver_lock); priv->tx_skb = skb; @@ -255,7 +288,9 @@ static void lbtf_tx_work(struct work_struct *work) if (err) { dev_kfree_skb_any(skb); priv->tx_skb = NULL; + pr_err("TX error: %d", err); } + lbtf_deb_leave(LBTF_DEB_MACOPS | LBTF_DEB_TX); } static int lbtf_op_start(struct ieee80211_hw *hw) @@ -264,6 +299,8 @@ static int lbtf_op_start(struct ieee80211_hw *hw) void *card = priv->card; int ret = -1; + lbtf_deb_enter(LBTF_DEB_MACOPS); + if (!priv->fw_ready) /* Upload firmware */ if (priv->hw_prog_firmware(card)) @@ -284,10 +321,12 @@ static int lbtf_op_start(struct ieee80211_hw *hw) } printk(KERN_INFO "libertastf: Marvell WLAN 802.11 thinfirm adapter\n"); + lbtf_deb_leave(LBTF_DEB_MACOPS); return 0; err_prog_firmware: priv->hw_reset_device(card); + lbtf_deb_leave_args(LBTF_DEB_MACOPS, "error programing fw; ret=%d", ret); return ret; } @@ -298,6 +337,9 @@ static void lbtf_op_stop(struct ieee80211_hw *hw) struct sk_buff *skb; struct cmd_ctrl_node *cmdnode; + + lbtf_deb_enter(LBTF_DEB_MACOPS); + /* Flush pending command nodes */ spin_lock_irqsave(&priv->driver_lock, flags); list_for_each_entry(cmdnode, &priv->cmdpendingq, list) { @@ -314,6 +356,7 @@ static void lbtf_op_stop(struct ieee80211_hw *hw) priv->radioon = RADIO_OFF; lbtf_set_radio_control(priv); + lbtf_deb_leave(LBTF_DEB_MACOPS); return; } @@ -321,6 +364,7 @@ static int lbtf_op_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { struct lbtf_private *priv = hw->priv; + lbtf_deb_enter(LBTF_DEB_MACOPS); if (priv->vif != NULL) return -EOPNOTSUPP; @@ -338,6 +382,7 @@ static int lbtf_op_add_interface(struct ieee80211_hw *hw, return -EOPNOTSUPP; } lbtf_set_mac_address(priv, (u8 *) vif->addr); + lbtf_deb_leave(LBTF_DEB_MACOPS); return 0; } @@ -345,6 +390,7 @@ static void lbtf_op_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { struct lbtf_private *priv = hw->priv; + lbtf_deb_enter(LBTF_DEB_MACOPS); if (priv->vif->type == NL80211_IFTYPE_AP || priv->vif->type == NL80211_IFTYPE_MESH_POINT) @@ -352,17 +398,20 @@ static void lbtf_op_remove_interface(struct ieee80211_hw *hw, lbtf_set_mode(priv, LBTF_PASSIVE_MODE); lbtf_set_bssid(priv, 0, NULL); priv->vif = NULL; + lbtf_deb_leave(LBTF_DEB_MACOPS); } static int lbtf_op_config(struct ieee80211_hw *hw, u32 changed) { struct lbtf_private *priv = hw->priv; struct ieee80211_conf *conf = &hw->conf; + lbtf_deb_enter(LBTF_DEB_MACOPS); if (conf->channel->center_freq != priv->cur_freq) { priv->cur_freq = conf->channel->center_freq; lbtf_set_channel(priv, conf->channel->hw_value); } + lbtf_deb_leave(LBTF_DEB_MACOPS); return 0; } @@ -395,11 +444,16 @@ static void lbtf_op_configure_filter(struct ieee80211_hw *hw, { struct lbtf_private *priv = hw->priv; int old_mac_control = priv->mac_control; + + lbtf_deb_enter(LBTF_DEB_MACOPS); + changed_flags &= SUPPORTED_FIF_FLAGS; *new_flags &= SUPPORTED_FIF_FLAGS; - if (!changed_flags) + if (!changed_flags) { + lbtf_deb_leave(LBTF_DEB_MACOPS); return; + } if (*new_flags & (FIF_PROMISC_IN_BSS)) priv->mac_control |= CMD_ACT_MAC_PROMISCUOUS_ENABLE; @@ -425,6 +479,8 @@ static void lbtf_op_configure_filter(struct ieee80211_hw *hw, if (priv->mac_control != old_mac_control) lbtf_set_mac_control(priv); + + lbtf_deb_leave(LBTF_DEB_MACOPS); } static void lbtf_op_bss_info_changed(struct ieee80211_hw *hw, @@ -434,6 +490,7 @@ static void lbtf_op_bss_info_changed(struct ieee80211_hw *hw, { struct lbtf_private *priv = hw->priv; struct sk_buff *beacon; + lbtf_deb_enter(LBTF_DEB_MACOPS); if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_INT)) { switch (priv->vif->type) { @@ -464,6 +521,8 @@ static void lbtf_op_bss_info_changed(struct ieee80211_hw *hw, priv->preamble = CMD_TYPE_LONG_PREAMBLE; lbtf_set_radio_control(priv); } + + lbtf_deb_leave(LBTF_DEB_MACOPS); } static const struct ieee80211_ops lbtf_ops = { @@ -486,6 +545,8 @@ int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb) unsigned int flags; struct ieee80211_hdr *hdr; + lbtf_deb_enter(LBTF_DEB_RX); + prxpd = (struct rxpd *) skb->data; stats.flag = 0; @@ -516,7 +577,15 @@ int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb) } memcpy(IEEE80211_SKB_RXCB(skb), &stats, sizeof(stats)); + + lbtf_deb_rx("rx data: skb->len-sizeof(RxPd) = %d-%zd = %zd\n", + skb->len, sizeof(struct rxpd), skb->len - sizeof(struct rxpd)); + lbtf_deb_hex(LBTF_DEB_RX, "RX Data", skb->data, + min_t(unsigned int, skb->len, 100)); + ieee80211_rx_irqsafe(priv->hw, skb); + + lbtf_deb_leave(LBTF_DEB_RX); return 0; } EXPORT_SYMBOL_GPL(lbtf_rx); @@ -533,6 +602,8 @@ struct lbtf_private *lbtf_add_card(void *card, struct device *dmdev) struct ieee80211_hw *hw; struct lbtf_private *priv = NULL; + lbtf_deb_enter(LBTF_DEB_MAIN); + hw = ieee80211_alloc_hw(sizeof(struct lbtf_private), &lbtf_ops); if (!hw) goto done; @@ -575,6 +646,7 @@ err_init_adapter: priv = NULL; done: + lbtf_deb_leave_args(LBTF_DEB_MAIN, "priv %p", priv); return priv; } EXPORT_SYMBOL_GPL(lbtf_add_card); @@ -584,6 +656,8 @@ int lbtf_remove_card(struct lbtf_private *priv) { struct ieee80211_hw *hw = priv->hw; + lbtf_deb_enter(LBTF_DEB_MAIN); + priv->surpriseremoved = 1; del_timer(&priv->command_timer); lbtf_free_adapter(priv); @@ -591,6 +665,7 @@ int lbtf_remove_card(struct lbtf_private *priv) ieee80211_unregister_hw(hw); ieee80211_free_hw(hw); + lbtf_deb_leave(LBTF_DEB_MAIN); return 0; } EXPORT_SYMBOL_GPL(lbtf_remove_card); @@ -649,17 +724,21 @@ EXPORT_SYMBOL_GPL(lbtf_bcn_sent); static int __init lbtf_init_module(void) { + lbtf_deb_enter(LBTF_DEB_MAIN); lbtf_wq = create_workqueue("libertastf"); if (lbtf_wq == NULL) { printk(KERN_ERR "libertastf: couldn't create workqueue\n"); return -ENOMEM; } + lbtf_deb_leave(LBTF_DEB_MAIN); return 0; } static void __exit lbtf_exit_module(void) { + lbtf_deb_enter(LBTF_DEB_MAIN); destroy_workqueue(lbtf_wq); + lbtf_deb_leave(LBTF_DEB_MAIN); } module_init(lbtf_init_module); From 5bf1e17a4a3870d4f03dc39f1bec4464bbdf4887 Mon Sep 17 00:00:00 2001 From: Sujith Date: Mon, 26 Apr 2010 15:09:36 +0530 Subject: [PATCH 025/109] ath9k_htc: Remove unnecessary powersave restore Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_drv_main.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index 9c9f3e0d6787..644776a51ac0 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -153,7 +153,6 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv, ath_print(common, ATH_DBG_FATAL, "Unable to reset channel (%u Mhz) " "reset status %d\n", channel->center_freq, ret); - ath9k_htc_ps_restore(priv); goto err; } From d439260e04eca5bce88558feecee4369784f2175 Mon Sep 17 00:00:00 2001 From: Sujith Date: Mon, 26 Apr 2010 15:09:39 +0530 Subject: [PATCH 026/109] ath9k_htc: Validate TX Endpoint ID Check for the endpoint IDs when processing TX completions and drop the unsupported EPIDs. We can add other endpoints (UAPSD,..) when support is added. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c index 2c3c51007dd3..08bfe5d81c17 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c @@ -244,16 +244,25 @@ void ath9k_htc_txep(void *drv_priv, struct sk_buff *skb, enum htc_endpoint_id ep_id, bool txok) { struct ath9k_htc_priv *priv = (struct ath9k_htc_priv *) drv_priv; + struct ath_common *common = ath9k_hw_common(priv->ah); struct ieee80211_tx_info *tx_info; if (!skb) return; - if (ep_id == priv->mgmt_ep) + if (ep_id == priv->mgmt_ep) { skb_pull(skb, sizeof(struct tx_mgmt_hdr)); - else - /* TODO: Check for cab/uapsd/data */ + } else if ((ep_id == priv->data_bk_ep) || + (ep_id == priv->data_be_ep) || + (ep_id == priv->data_vi_ep) || + (ep_id == priv->data_vo_ep)) { skb_pull(skb, sizeof(struct tx_frame_hdr)); + } else { + ath_print(common, ATH_DBG_FATAL, + "Unsupported TX EPID: %d\n", ep_id); + dev_kfree_skb_any(skb); + return; + } tx_info = IEEE80211_SKB_CB(skb); From 4f824719a2729f1a6bb78de20c4d3b3dbdd81a09 Mon Sep 17 00:00:00 2001 From: Sujith Date: Mon, 26 Apr 2010 15:09:42 +0530 Subject: [PATCH 027/109] ath9k_htc: Simplify RX IRQ handler A bunch of validation and processing in the RX IRQ handler can be moved to the RX tasklet. The IRQ handler is already heavy, with the memory allocation for handling stream mode. Also, a memcpy of 40 bytes for every packet can be avoided in the handler. Signed-off-by: Sujith Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 44 +++++++++---------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c index 08bfe5d81c17..28abc7d5e909 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c @@ -448,10 +448,32 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv, struct ieee80211_hw *hw = priv->hw; struct sk_buff *skb = rxbuf->skb; struct ath_common *common = ath9k_hw_common(priv->ah); + struct ath_htc_rx_status *rxstatus; int hdrlen, padpos, padsize; int last_rssi = ATH_RSSI_DUMMY_MARKER; __le16 fc; + if (skb->len <= HTC_RX_FRAME_HEADER_SIZE) { + ath_print(common, ATH_DBG_FATAL, + "Corrupted RX frame, dropping\n"); + goto rx_next; + } + + rxstatus = (struct ath_htc_rx_status *)skb->data; + + if (be16_to_cpu(rxstatus->rs_datalen) - + (skb->len - HTC_RX_FRAME_HEADER_SIZE) != 0) { + ath_print(common, ATH_DBG_FATAL, + "Corrupted RX data len, dropping " + "(dlen: %d, skblen: %d)\n", + rxstatus->rs_datalen, skb->len); + goto rx_next; + } + + /* Get the RX status information */ + memcpy(&rxbuf->rxstatus, rxstatus, HTC_RX_FRAME_HEADER_SIZE); + skb_pull(skb, HTC_RX_FRAME_HEADER_SIZE); + hdr = (struct ieee80211_hdr *)skb->data; fc = hdr->frame_control; hdrlen = ieee80211_get_hdrlen_from_skb(skb); @@ -616,8 +638,6 @@ void ath9k_htc_rxep(void *drv_priv, struct sk_buff *skb, struct ath_hw *ah = priv->ah; struct ath_common *common = ath9k_hw_common(ah); struct ath9k_htc_rxbuf *rxbuf = NULL, *tmp_buf = NULL; - struct ath_htc_rx_status *rxstatus; - u32 len = 0; spin_lock(&priv->rx.rxbuflock); list_for_each_entry(tmp_buf, &priv->rx.rxbuf, list) { @@ -634,27 +654,7 @@ void ath9k_htc_rxep(void *drv_priv, struct sk_buff *skb, goto err; } - len = skb->len; - if (len <= HTC_RX_FRAME_HEADER_SIZE) { - ath_print(common, ATH_DBG_FATAL, - "Corrupted RX frame, dropping\n"); - goto err; - } - - rxstatus = (struct ath_htc_rx_status *)skb->data; - - if (be16_to_cpu(rxstatus->rs_datalen) - - (len - HTC_RX_FRAME_HEADER_SIZE) != 0) { - ath_print(common, ATH_DBG_FATAL, - "Corrupted RX data len, dropping " - "(epid: %d, dlen: %d, skblen: %d)\n", - ep_id, rxstatus->rs_datalen, len); - goto err; - } - spin_lock(&priv->rx.rxbuflock); - memcpy(&rxbuf->rxstatus, rxstatus, HTC_RX_FRAME_HEADER_SIZE); - skb_pull(skb, HTC_RX_FRAME_HEADER_SIZE); rxbuf->skb = skb; rxbuf->in_process = true; spin_unlock(&priv->rx.rxbuflock); From f7917af92024d43bc20bc1afc92de27b0bd0f50b Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 27 Apr 2010 00:26:34 +0200 Subject: [PATCH 028/109] mac80211: fix handling of 4-address-mode in ieee80211_change_iface A misplaced interface type check bails out too early if the interface is not in monitor mode. This patch moves it to the right place, so that it only covers changes to the monitor flags. Signed-off-by: Felix Fietkau Cc: stable@kernel.org Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index f97dda735cbb..592f07d2ae5c 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -96,9 +96,6 @@ static int ieee80211_change_iface(struct wiphy *wiphy, params->mesh_id_len, params->mesh_id); - if (sdata->vif.type != NL80211_IFTYPE_MONITOR || !flags) - return 0; - if (type == NL80211_IFTYPE_AP_VLAN && params && params->use_4addr == 0) rcu_assign_pointer(sdata->u.vlan.sta, NULL); @@ -106,7 +103,9 @@ static int ieee80211_change_iface(struct wiphy *wiphy, params && params->use_4addr >= 0) sdata->u.mgd.use_4addr = params->use_4addr; - sdata->u.mntr_flags = *flags; + if (sdata->vif.type == NL80211_IFTYPE_MONITOR && flags) + sdata->u.mntr_flags = *flags; + return 0; } From 2fcb91317360d75efa3cbf4b200c9e7131c6b527 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 26 Apr 2010 15:04:29 -0400 Subject: [PATCH 029/109] ath9k_hw: update initvals for AR9003 This synchs up the initvals to the values used on the Atheros HAL for AR9003. This specific change adds support for a new high power module. Signed-off-by: Felix Fietkau Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- .../net/wireless/ath/ath9k/ar9003_initvals.h | 265 +++++++++--------- 1 file changed, 128 insertions(+), 137 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_initvals.h b/drivers/net/wireless/ath/ath9k/ar9003_initvals.h index e0391b12e533..a131cd10ef29 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_initvals.h @@ -31,7 +31,7 @@ static const u32 ar9300_2p0_radio_postamble[][5] = { static const u32 ar9300Modes_lowest_ob_db_tx_gain_table_2p0[][5] = { /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ - {0x0000a410, 0x000050da, 0x000050da, 0x000050da, 0x000050da}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9}, {0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002}, {0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004}, @@ -545,7 +545,7 @@ static const u32 ar9300_2p0_soc_postamble[][5] = { }; static const u32 ar9200_merlin_2p0_radio_core[][2] = { - /* Addr common */ + /* Addr allmodes */ {0x00007800, 0x00040000}, {0x00007804, 0xdb005012}, {0x00007808, 0x04924914}, @@ -835,71 +835,71 @@ static const u32 ar9300_2p0_baseband_core[][2] = { static const u32 ar9300Modes_high_power_tx_gain_table_2p0[][5] = { /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ - {0x0000a410, 0x000050d9, 0x000050d9, 0x000050da, 0x000050da}, + {0x0000a410, 0x000050db, 0x000050db, 0x000050d9, 0x000050d9}, {0x0000a500, 0x00020220, 0x00020220, 0x00000000, 0x00000000}, {0x0000a504, 0x06020223, 0x06020223, 0x04000002, 0x04000002}, - {0x0000a508, 0x0b022220, 0x0b022220, 0x08000004, 0x08000004}, - {0x0000a50c, 0x10022223, 0x10022223, 0x0b000200, 0x0b000200}, - {0x0000a510, 0x17022620, 0x17022620, 0x0f000202, 0x0f000202}, - {0x0000a514, 0x1b022622, 0x1b022622, 0x11000400, 0x11000400}, - {0x0000a518, 0x1f022822, 0x1f022822, 0x15000402, 0x15000402}, - {0x0000a51c, 0x24022842, 0x24022842, 0x19000404, 0x19000404}, - {0x0000a520, 0x28042840, 0x28042840, 0x1b000603, 0x1b000603}, - {0x0000a524, 0x2c042842, 0x2c042842, 0x1f000a02, 0x1f000a02}, - {0x0000a528, 0x30042844, 0x30042844, 0x23000a04, 0x23000a04}, - {0x0000a52c, 0x34042846, 0x34042846, 0x26000a20, 0x26000a20}, - {0x0000a530, 0x39042869, 0x39042869, 0x2a000e20, 0x2a000e20}, - {0x0000a534, 0x3d062869, 0x3d062869, 0x2e000e22, 0x2e000e22}, - {0x0000a538, 0x44062c69, 0x44062c69, 0x31000e24, 0x31000e24}, - {0x0000a53c, 0x48063069, 0x48063069, 0x34001640, 0x34001640}, - {0x0000a540, 0x4c0a3065, 0x4c0a3065, 0x38001660, 0x38001660}, - {0x0000a544, 0x500a3069, 0x500a3069, 0x3b001861, 0x3b001861}, - {0x0000a548, 0x530a3469, 0x530a3469, 0x3e001a81, 0x3e001a81}, - {0x0000a54c, 0x590a7464, 0x590a7464, 0x42001a83, 0x42001a83}, - {0x0000a550, 0x5e0a7865, 0x5e0a7865, 0x44001c84, 0x44001c84}, - {0x0000a554, 0x630a7e66, 0x630a7e66, 0x48001ce3, 0x48001ce3}, - {0x0000a558, 0x680a7e89, 0x680a7e89, 0x4c001ce5, 0x4c001ce5}, - {0x0000a55c, 0x6e0a7e8c, 0x6e0a7e8c, 0x50001ce9, 0x50001ce9}, - {0x0000a560, 0x730e7e8c, 0x730e7e8c, 0x54001ceb, 0x54001ceb}, - {0x0000a564, 0x730e7e8c, 0x730e7e8c, 0x56001eec, 0x56001eec}, - {0x0000a568, 0x730e7e8c, 0x730e7e8c, 0x56001eec, 0x56001eec}, - {0x0000a56c, 0x730e7e8c, 0x730e7e8c, 0x56001eec, 0x56001eec}, - {0x0000a570, 0x730e7e8c, 0x730e7e8c, 0x56001eec, 0x56001eec}, - {0x0000a574, 0x730e7e8c, 0x730e7e8c, 0x56001eec, 0x56001eec}, - {0x0000a578, 0x730e7e8c, 0x730e7e8c, 0x56001eec, 0x56001eec}, - {0x0000a57c, 0x730e7e8c, 0x730e7e8c, 0x56001eec, 0x56001eec}, + {0x0000a508, 0x0a022220, 0x0a022220, 0x08000004, 0x08000004}, + {0x0000a50c, 0x0f022223, 0x0f022223, 0x0b000200, 0x0b000200}, + {0x0000a510, 0x14022620, 0x14022620, 0x0f000202, 0x0f000202}, + {0x0000a514, 0x18022622, 0x18022622, 0x11000400, 0x11000400}, + {0x0000a518, 0x1b022822, 0x1b022822, 0x15000402, 0x15000402}, + {0x0000a51c, 0x20022842, 0x20022842, 0x19000404, 0x19000404}, + {0x0000a520, 0x22022c41, 0x22022c41, 0x1b000603, 0x1b000603}, + {0x0000a524, 0x28023042, 0x28023042, 0x1f000a02, 0x1f000a02}, + {0x0000a528, 0x2c023044, 0x2c023044, 0x23000a04, 0x23000a04}, + {0x0000a52c, 0x2f023644, 0x2f023644, 0x26000a20, 0x26000a20}, + {0x0000a530, 0x34043643, 0x34043643, 0x2a000e20, 0x2a000e20}, + {0x0000a534, 0x38043a44, 0x38043a44, 0x2e000e22, 0x2e000e22}, + {0x0000a538, 0x3b043e45, 0x3b043e45, 0x31000e24, 0x31000e24}, + {0x0000a53c, 0x40063e46, 0x40063e46, 0x34001640, 0x34001640}, + {0x0000a540, 0x44083e46, 0x44083e46, 0x38001660, 0x38001660}, + {0x0000a544, 0x46083e66, 0x46083e66, 0x3b001861, 0x3b001861}, + {0x0000a548, 0x4b0a3e69, 0x4b0a3e69, 0x3e001a81, 0x3e001a81}, + {0x0000a54c, 0x4f0a5e66, 0x4f0a5e66, 0x42001a83, 0x42001a83}, + {0x0000a550, 0x540a7e66, 0x540a7e66, 0x44001c84, 0x44001c84}, + {0x0000a554, 0x570a7e89, 0x570a7e89, 0x48001ce3, 0x48001ce3}, + {0x0000a558, 0x5c0e7e8a, 0x5c0e7e8a, 0x4c001ce5, 0x4c001ce5}, + {0x0000a55c, 0x60127e8b, 0x60127e8b, 0x50001ce9, 0x50001ce9}, + {0x0000a560, 0x65127ecc, 0x65127ecc, 0x54001ceb, 0x54001ceb}, + {0x0000a564, 0x6b169ecd, 0x6b169ecd, 0x56001eec, 0x56001eec}, + {0x0000a568, 0x70169f0e, 0x70169f0e, 0x56001eec, 0x56001eec}, + {0x0000a56c, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec}, + {0x0000a570, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec}, + {0x0000a574, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec}, + {0x0000a578, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec}, + {0x0000a57c, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec}, {0x0000a580, 0x00820220, 0x00820220, 0x00800000, 0x00800000}, {0x0000a584, 0x06820223, 0x06820223, 0x04800002, 0x04800002}, - {0x0000a588, 0x0b822220, 0x0b822220, 0x08800004, 0x08800004}, - {0x0000a58c, 0x10822223, 0x10822223, 0x0b800200, 0x0b800200}, - {0x0000a590, 0x17822620, 0x17822620, 0x0f800202, 0x0f800202}, - {0x0000a594, 0x1b822622, 0x1b822622, 0x11800400, 0x11800400}, - {0x0000a598, 0x1f822822, 0x1f822822, 0x15800402, 0x15800402}, - {0x0000a59c, 0x24822842, 0x24822842, 0x19800404, 0x19800404}, - {0x0000a5a0, 0x28842840, 0x28842840, 0x1b800603, 0x1b800603}, - {0x0000a5a4, 0x2c842842, 0x2c842842, 0x1f800a02, 0x1f800a02}, - {0x0000a5a8, 0x30842844, 0x30842844, 0x23800a04, 0x23800a04}, - {0x0000a5ac, 0x34842846, 0x34842846, 0x26800a20, 0x26800a20}, - {0x0000a5b0, 0x39842869, 0x39842869, 0x2a800e20, 0x2a800e20}, - {0x0000a5b4, 0x3d862869, 0x3d862869, 0x2e800e22, 0x2e800e22}, - {0x0000a5b8, 0x44862c69, 0x44862c69, 0x31800e24, 0x31800e24}, - {0x0000a5bc, 0x48863069, 0x48863069, 0x34801640, 0x34801640}, - {0x0000a5c0, 0x4c8a3065, 0x4c8a3065, 0x38801660, 0x38801660}, - {0x0000a5c4, 0x508a3069, 0x508a3069, 0x3b801861, 0x3b801861}, - {0x0000a5c8, 0x538a3469, 0x538a3469, 0x3e801a81, 0x3e801a81}, - {0x0000a5cc, 0x598a7464, 0x598a7464, 0x42801a83, 0x42801a83}, - {0x0000a5d0, 0x5e8a7865, 0x5e8a7865, 0x44801c84, 0x44801c84}, - {0x0000a5d4, 0x638a7e66, 0x638a7e66, 0x48801ce3, 0x48801ce3}, - {0x0000a5d8, 0x688a7e89, 0x688a7e89, 0x4c801ce5, 0x4c801ce5}, - {0x0000a5dc, 0x6e8a7e8c, 0x6e8a7e8c, 0x50801ce9, 0x50801ce9}, - {0x0000a5e0, 0x738e7e8c, 0x738e7e8c, 0x54801ceb, 0x54801ceb}, - {0x0000a5e4, 0x738e7e8c, 0x738e7e8c, 0x56801eec, 0x56801eec}, - {0x0000a5e8, 0x738e7e8c, 0x738e7e8c, 0x56801eec, 0x56801eec}, - {0x0000a5ec, 0x738e7e8c, 0x738e7e8c, 0x56801eec, 0x56801eec}, - {0x0000a5f0, 0x738e7e8c, 0x738e7e8c, 0x56801eec, 0x56801eec}, - {0x0000a5f4, 0x738e7e8c, 0x738e7e8c, 0x56801eec, 0x56801eec}, - {0x0000a5f8, 0x738e7e8c, 0x738e7e8c, 0x56801eec, 0x56801eec}, - {0x0000a5fc, 0x738e7e8c, 0x738e7e8c, 0x56801eec, 0x56801eec}, + {0x0000a588, 0x0a822220, 0x0a822220, 0x08800004, 0x08800004}, + {0x0000a58c, 0x0f822223, 0x0f822223, 0x0b800200, 0x0b800200}, + {0x0000a590, 0x14822620, 0x14822620, 0x0f800202, 0x0f800202}, + {0x0000a594, 0x18822622, 0x18822622, 0x11800400, 0x11800400}, + {0x0000a598, 0x1b822822, 0x1b822822, 0x15800402, 0x15800402}, + {0x0000a59c, 0x20822842, 0x20822842, 0x19800404, 0x19800404}, + {0x0000a5a0, 0x22822c41, 0x22822c41, 0x1b800603, 0x1b800603}, + {0x0000a5a4, 0x28823042, 0x28823042, 0x1f800a02, 0x1f800a02}, + {0x0000a5a8, 0x2c823044, 0x2c823044, 0x23800a04, 0x23800a04}, + {0x0000a5ac, 0x2f823644, 0x2f823644, 0x26800a20, 0x26800a20}, + {0x0000a5b0, 0x34843643, 0x34843643, 0x2a800e20, 0x2a800e20}, + {0x0000a5b4, 0x38843a44, 0x38843a44, 0x2e800e22, 0x2e800e22}, + {0x0000a5b8, 0x3b843e45, 0x3b843e45, 0x31800e24, 0x31800e24}, + {0x0000a5bc, 0x40863e46, 0x40863e46, 0x34801640, 0x34801640}, + {0x0000a5c0, 0x4c8a3065, 0x44883e46, 0x44883e46, 0x38801660}, + {0x0000a5c4, 0x46883e66, 0x46883e66, 0x3b801861, 0x3b801861}, + {0x0000a5c8, 0x4b8a3e69, 0x4b8a3e69, 0x3e801a81, 0x3e801a81}, + {0x0000a5cc, 0x4f8a5e66, 0x4f8a5e66, 0x42801a83, 0x42801a83}, + {0x0000a5d0, 0x548a7e66, 0x548a7e66, 0x44801c84, 0x44801c84}, + {0x0000a5d4, 0x578a7e89, 0x578a7e89, 0x48801ce3, 0x48801ce3}, + {0x0000a5d8, 0x5c8e7e8a, 0x5c8e7e8a, 0x4c801ce5, 0x4c801ce5}, + {0x0000a5dc, 0x60927e8b, 0x60927e8b, 0x50801ce9, 0x50801ce9}, + {0x0000a5e0, 0x65927ecc, 0x65927ecc, 0x54801ceb, 0x54801ceb}, + {0x0000a5e4, 0x6b969ecd, 0x6b969ecd, 0x56801eec, 0x56801eec}, + {0x0000a5e8, 0x70969f0e, 0x70969f0e, 0x56801eec, 0x56801eec}, + {0x0000a5ec, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec}, + {0x0000a5f0, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec}, + {0x0000a5f4, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec}, + {0x0000a5f8, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec}, + {0x0000a5fc, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec}, {0x00016044, 0x056db2e6, 0x056db2e6, 0x056db2e6, 0x056db2e6}, {0x00016048, 0xad241a61, 0xad241a61, 0xad241a61, 0xad241a61}, {0x00016068, 0x6eb6db6c, 0x6eb6db6c, 0x6eb6db6c, 0x6eb6db6c}, @@ -913,71 +913,71 @@ static const u32 ar9300Modes_high_power_tx_gain_table_2p0[][5] = { static const u32 ar9300Modes_high_ob_db_tx_gain_table_2p0[][5] = { /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ - {0x0000a410, 0x000050d9, 0x000050d9, 0x000050da, 0x000050da}, + {0x0000a410, 0x000050db, 0x000050db, 0x000050d9, 0x000050d9}, {0x0000a500, 0x00020220, 0x00020220, 0x00000000, 0x00000000}, {0x0000a504, 0x06020223, 0x06020223, 0x04000002, 0x04000002}, - {0x0000a508, 0x0b022220, 0x0b022220, 0x08000004, 0x08000004}, - {0x0000a50c, 0x10022223, 0x10022223, 0x0b000200, 0x0b000200}, - {0x0000a510, 0x17022620, 0x17022620, 0x0f000202, 0x0f000202}, - {0x0000a514, 0x1b022622, 0x1b022622, 0x11000400, 0x11000400}, - {0x0000a518, 0x1f022822, 0x1f022822, 0x15000402, 0x15000402}, - {0x0000a51c, 0x24022842, 0x24022842, 0x19000404, 0x19000404}, - {0x0000a520, 0x28042840, 0x28042840, 0x1b000603, 0x1b000603}, - {0x0000a524, 0x2c042842, 0x2c042842, 0x1f000a02, 0x1f000a02}, - {0x0000a528, 0x30042844, 0x30042844, 0x23000a04, 0x23000a04}, - {0x0000a52c, 0x34042846, 0x34042846, 0x26000a20, 0x26000a20}, - {0x0000a530, 0x39042869, 0x39042869, 0x2a000e20, 0x2a000e20}, - {0x0000a534, 0x3d062869, 0x3d062869, 0x2e000e22, 0x2e000e22}, - {0x0000a538, 0x44062c69, 0x44062c69, 0x31000e24, 0x31000e24}, - {0x0000a53c, 0x48063069, 0x48063069, 0x34001640, 0x34001640}, - {0x0000a540, 0x4c0a3065, 0x4c0a3065, 0x38001660, 0x38001660}, - {0x0000a544, 0x500a3069, 0x500a3069, 0x3b001861, 0x3b001861}, - {0x0000a548, 0x530a3469, 0x530a3469, 0x3e001a81, 0x3e001a81}, - {0x0000a54c, 0x590a7464, 0x590a7464, 0x42001a83, 0x42001a83}, - {0x0000a550, 0x5e0a7865, 0x5e0a7865, 0x44001c84, 0x44001c84}, - {0x0000a554, 0x630a7e66, 0x630a7e66, 0x48001ce3, 0x48001ce3}, - {0x0000a558, 0x680a7e89, 0x680a7e89, 0x4c001ce5, 0x4c001ce5}, - {0x0000a55c, 0x6e0a7e8c, 0x6e0a7e8c, 0x50001ce9, 0x50001ce9}, - {0x0000a560, 0x730e7e8c, 0x730e7e8c, 0x54001ceb, 0x54001ceb}, - {0x0000a564, 0x730e7e8c, 0x730e7e8c, 0x56001eec, 0x56001eec}, - {0x0000a568, 0x730e7e8c, 0x730e7e8c, 0x56001eec, 0x56001eec}, - {0x0000a56c, 0x730e7e8c, 0x730e7e8c, 0x56001eec, 0x56001eec}, - {0x0000a570, 0x730e7e8c, 0x730e7e8c, 0x56001eec, 0x56001eec}, - {0x0000a574, 0x730e7e8c, 0x730e7e8c, 0x56001eec, 0x56001eec}, - {0x0000a578, 0x730e7e8c, 0x730e7e8c, 0x56001eec, 0x56001eec}, - {0x0000a57c, 0x730e7e8c, 0x730e7e8c, 0x56001eec, 0x56001eec}, + {0x0000a508, 0x0a022220, 0x0a022220, 0x08000004, 0x08000004}, + {0x0000a50c, 0x0f022223, 0x0f022223, 0x0b000200, 0x0b000200}, + {0x0000a510, 0x14022620, 0x14022620, 0x0f000202, 0x0f000202}, + {0x0000a514, 0x18022622, 0x18022622, 0x11000400, 0x11000400}, + {0x0000a518, 0x1b022822, 0x1b022822, 0x15000402, 0x15000402}, + {0x0000a51c, 0x20022842, 0x20022842, 0x19000404, 0x19000404}, + {0x0000a520, 0x22022c41, 0x22022c41, 0x1b000603, 0x1b000603}, + {0x0000a524, 0x28023042, 0x28023042, 0x1f000a02, 0x1f000a02}, + {0x0000a528, 0x2c023044, 0x2c023044, 0x23000a04, 0x23000a04}, + {0x0000a52c, 0x2f023644, 0x2f023644, 0x26000a20, 0x26000a20}, + {0x0000a530, 0x34043643, 0x34043643, 0x2a000e20, 0x2a000e20}, + {0x0000a534, 0x38043a44, 0x38043a44, 0x2e000e22, 0x2e000e22}, + {0x0000a538, 0x3b043e45, 0x3b043e45, 0x31000e24, 0x31000e24}, + {0x0000a53c, 0x40063e46, 0x40063e46, 0x34001640, 0x34001640}, + {0x0000a540, 0x44083e46, 0x44083e46, 0x38001660, 0x38001660}, + {0x0000a544, 0x46083e66, 0x46083e66, 0x3b001861, 0x3b001861}, + {0x0000a548, 0x4b0a3e69, 0x4b0a3e69, 0x3e001a81, 0x3e001a81}, + {0x0000a54c, 0x4f0a5e66, 0x4f0a5e66, 0x42001a83, 0x42001a83}, + {0x0000a550, 0x540a7e66, 0x540a7e66, 0x44001c84, 0x44001c84}, + {0x0000a554, 0x570a7e89, 0x570a7e89, 0x48001ce3, 0x48001ce3}, + {0x0000a558, 0x5c0e7e8a, 0x5c0e7e8a, 0x4c001ce5, 0x4c001ce5}, + {0x0000a55c, 0x60127e8b, 0x60127e8b, 0x50001ce9, 0x50001ce9}, + {0x0000a560, 0x65127ecc, 0x65127ecc, 0x54001ceb, 0x54001ceb}, + {0x0000a564, 0x6b169ecd, 0x6b169ecd, 0x56001eec, 0x56001eec}, + {0x0000a568, 0x70169f0e, 0x70169f0e, 0x56001eec, 0x56001eec}, + {0x0000a56c, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec}, + {0x0000a570, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec}, + {0x0000a574, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec}, + {0x0000a578, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec}, + {0x0000a57c, 0x75169f4f, 0x75169f4f, 0x56001eec, 0x56001eec}, {0x0000a580, 0x00820220, 0x00820220, 0x00800000, 0x00800000}, {0x0000a584, 0x06820223, 0x06820223, 0x04800002, 0x04800002}, - {0x0000a588, 0x0b822220, 0x0b822220, 0x08800004, 0x08800004}, - {0x0000a58c, 0x10822223, 0x10822223, 0x0b800200, 0x0b800200}, - {0x0000a590, 0x17822620, 0x17822620, 0x0f800202, 0x0f800202}, - {0x0000a594, 0x1b822622, 0x1b822622, 0x11800400, 0x11800400}, - {0x0000a598, 0x1f822822, 0x1f822822, 0x15800402, 0x15800402}, - {0x0000a59c, 0x24822842, 0x24822842, 0x19800404, 0x19800404}, - {0x0000a5a0, 0x28842840, 0x28842840, 0x1b800603, 0x1b800603}, - {0x0000a5a4, 0x2c842842, 0x2c842842, 0x1f800a02, 0x1f800a02}, - {0x0000a5a8, 0x30842844, 0x30842844, 0x23800a04, 0x23800a04}, - {0x0000a5ac, 0x34842846, 0x34842846, 0x26800a20, 0x26800a20}, - {0x0000a5b0, 0x39842869, 0x39842869, 0x2a800e20, 0x2a800e20}, - {0x0000a5b4, 0x3d862869, 0x3d862869, 0x2e800e22, 0x2e800e22}, - {0x0000a5b8, 0x44862c69, 0x44862c69, 0x31800e24, 0x31800e24}, - {0x0000a5bc, 0x48863069, 0x48863069, 0x34801640, 0x34801640}, - {0x0000a5c0, 0x4c8a3065, 0x4c8a3065, 0x38801660, 0x38801660}, - {0x0000a5c4, 0x508a3069, 0x508a3069, 0x3b801861, 0x3b801861}, - {0x0000a5c8, 0x538a3469, 0x538a3469, 0x3e801a81, 0x3e801a81}, - {0x0000a5cc, 0x598a7464, 0x598a7464, 0x42801a83, 0x42801a83}, - {0x0000a5d0, 0x5e8a7865, 0x5e8a7865, 0x44801c84, 0x44801c84}, - {0x0000a5d4, 0x638a7e66, 0x638a7e66, 0x48801ce3, 0x48801ce3}, - {0x0000a5d8, 0x688a7e89, 0x688a7e89, 0x4c801ce5, 0x4c801ce5}, - {0x0000a5dc, 0x6e8a7e8c, 0x6e8a7e8c, 0x50801ce9, 0x50801ce9}, - {0x0000a5e0, 0x738e7e8c, 0x738e7e8c, 0x54801ceb, 0x54801ceb}, - {0x0000a5e4, 0x738e7e8c, 0x738e7e8c, 0x56801eec, 0x56801eec}, - {0x0000a5e8, 0x738e7e8c, 0x738e7e8c, 0x56801eec, 0x56801eec}, - {0x0000a5ec, 0x738e7e8c, 0x738e7e8c, 0x56801eec, 0x56801eec}, - {0x0000a5f0, 0x738e7e8c, 0x738e7e8c, 0x56801eec, 0x56801eec}, - {0x0000a5f4, 0x738e7e8c, 0x738e7e8c, 0x56801eec, 0x56801eec}, - {0x0000a5f8, 0x738e7e8c, 0x738e7e8c, 0x56801eec, 0x56801eec}, - {0x0000a5fc, 0x738e7e8c, 0x738e7e8c, 0x56801eec, 0x56801eec}, + {0x0000a588, 0x0a822220, 0x0a822220, 0x08800004, 0x08800004}, + {0x0000a58c, 0x0f822223, 0x0f822223, 0x0b800200, 0x0b800200}, + {0x0000a590, 0x14822620, 0x14822620, 0x0f800202, 0x0f800202}, + {0x0000a594, 0x18822622, 0x18822622, 0x11800400, 0x11800400}, + {0x0000a598, 0x1b822822, 0x1b822822, 0x15800402, 0x15800402}, + {0x0000a59c, 0x20822842, 0x20822842, 0x19800404, 0x19800404}, + {0x0000a5a0, 0x22822c41, 0x22822c41, 0x1b800603, 0x1b800603}, + {0x0000a5a4, 0x28823042, 0x28823042, 0x1f800a02, 0x1f800a02}, + {0x0000a5a8, 0x2c823044, 0x2c823044, 0x23800a04, 0x23800a04}, + {0x0000a5ac, 0x2f823644, 0x2f823644, 0x26800a20, 0x26800a20}, + {0x0000a5b0, 0x34843643, 0x34843643, 0x2a800e20, 0x2a800e20}, + {0x0000a5b4, 0x38843a44, 0x38843a44, 0x2e800e22, 0x2e800e22}, + {0x0000a5b8, 0x3b843e45, 0x3b843e45, 0x31800e24, 0x31800e24}, + {0x0000a5bc, 0x40863e46, 0x40863e46, 0x34801640, 0x34801640}, + {0x0000a5c0, 0x44883e46, 0x44883e46, 0x38801660, 0x38801660}, + {0x0000a5c4, 0x46883e66, 0x46883e66, 0x3b801861, 0x3b801861}, + {0x0000a5c8, 0x4b8a3e69, 0x4b8a3e69, 0x3e801a81, 0x3e801a81}, + {0x0000a5cc, 0x4f8a5e66, 0x4f8a5e66, 0x42801a83, 0x42801a83}, + {0x0000a5d0, 0x548a7e66, 0x548a7e66, 0x44801c84, 0x44801c84}, + {0x0000a5d4, 0x578a7e89, 0x578a7e89, 0x48801ce3, 0x48801ce3}, + {0x0000a5d8, 0x5c8e7e8a, 0x5c8e7e8a, 0x4c801ce5, 0x4c801ce5}, + {0x0000a5dc, 0x60927e8b, 0x60927e8b, 0x50801ce9, 0x50801ce9}, + {0x0000a5e0, 0x65927ecc, 0x65927ecc, 0x54801ceb, 0x54801ceb}, + {0x0000a5e4, 0x6b969ecd, 0x6b969ecd, 0x56801eec, 0x56801eec}, + {0x0000a5e8, 0x70969f0e, 0x70969f0e, 0x56801eec, 0x56801eec}, + {0x0000a5ec, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec}, + {0x0000a5f0, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec}, + {0x0000a5f4, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec}, + {0x0000a5f8, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec}, + {0x0000a5fc, 0x75969f4f, 0x75969f4f, 0x56801eec, 0x56801eec}, {0x00016044, 0x056db2e4, 0x056db2e4, 0x056db2e4, 0x056db2e4}, {0x00016048, 0x8c001a61, 0x8c001a61, 0x8c001a61, 0x8c001a61}, {0x00016068, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c, 0x6db6db6c}, @@ -1251,7 +1251,7 @@ static const u32 ar9300Common_rx_gain_table_2p0[][2] = { static const u32 ar9300Modes_low_ob_db_tx_gain_table_2p0[][5] = { /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ - {0x0000a410, 0x000050da, 0x000050da, 0x000050da, 0x000050da}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9}, {0x0000a500, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a504, 0x06000003, 0x06000003, 0x04000002, 0x04000002}, {0x0000a508, 0x0a000020, 0x0a000020, 0x08000004, 0x08000004}, @@ -1760,31 +1760,22 @@ static const u32 ar9300_2p0_soc_preamble[][2] = { {0x00007038, 0x000004c2}, }; -/* - * PCIE-PHY programming array, to be used prior to entering - * full sleep (holding RTC in reset, PLL is ON in L1 mode) - */ static const u32 ar9300PciePhy_pll_on_clkreq_disable_L1_2p0[][2] = { + /* Addr allmodes */ {0x00004040, 0x08212e5e}, {0x00004040, 0x0008003b}, {0x00004044, 0x00000000}, }; -/* - * PCIE-PHY programming array, to be used when not in - * full sleep (holding RTC in reset) - */ static const u32 ar9300PciePhy_clkreq_enable_L1_2p0[][2] = { + /* Addr allmodes */ {0x00004040, 0x08253e5e}, {0x00004040, 0x0008003b}, {0x00004044, 0x00000000}, }; -/* - * PCIE-PHY programming array, to be used prior to entering - * full sleep (holding RTC in reset) - */ static const u32 ar9300PciePhy_clkreq_disable_L1_2p0[][2] = { + /* Addr allmodes */ {0x00004040, 0x08213e5e}, {0x00004040, 0x0008003b}, {0x00004044, 0x00000000}, From 14bc110463bafc1aa4a51d4443e9dc1a88b58c40 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 26 Apr 2010 15:04:30 -0400 Subject: [PATCH 030/109] ath9k_hw: fix pll clock setting for 5ghz on AR9003 Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 137543b2d739..bf8ec687f9e0 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -375,16 +375,7 @@ static u32 ar9003_hw_compute_pll_control(struct ath_hw *ah, else if (chan && IS_CHAN_QUARTER_RATE(chan)) pll |= SM(0x2, AR_RTC_9300_PLL_CLKSEL); - if (chan && IS_CHAN_5GHZ(chan)) { - pll |= SM(0x28, AR_RTC_9300_PLL_DIV); - - /* - * When doing fast clock, set PLL to 0x142c - */ - if (IS_CHAN_A_5MHZ_SPACED(chan)) - pll = 0x142c; - } else - pll |= SM(0x2c, AR_RTC_9300_PLL_DIV); + pll |= SM(0x2c, AR_RTC_9300_PLL_DIV); return pll; } From 83937227657545f9e7aa9bfcb4429e81c9135f46 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 26 Apr 2010 15:04:31 -0400 Subject: [PATCH 031/109] ath9k_hw: fix typo in the AR9003 EEPROM data structure definition Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h index 5fe335e22c89..d8c0318f416f 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h @@ -265,7 +265,7 @@ struct cal_ctl_edge_pwr { } __packed; struct cal_ctl_data_2g { - struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_5G]; + struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_2G]; } __packed; struct cal_ctl_data_5g { From b360a884834a83ede845733cf344a29eb10dd2e3 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 26 Apr 2010 15:04:32 -0400 Subject: [PATCH 032/109] ath9k_hw: disable TX IQ calibration for AR9003 Disable TX IQ calibration, it was prematurely enabled in previous versions. Cc: Paul Shaw Cc: Thomas Hammel Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_calib.c | 3 ++- drivers/net/wireless/ath/ath9k/hw.c | 6 ++++++ drivers/net/wireless/ath/ath9k/hw.h | 1 + 3 files changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 5e20b4860c7f..5fcafb460877 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -755,7 +755,8 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, } /* Do Tx IQ Calibration */ - ar9003_hw_tx_iq_cal(ah); + if (ah->config.tx_iq_calibration) + ar9003_hw_tx_iq_cal(ah); /* Revert chainmasks to their original values before NF cal */ ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask); diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index b6d12e52d30e..40b6e8415946 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -385,6 +385,12 @@ static void ath9k_hw_init_config(struct ath_hw *ah) ah->config.rx_intr_mitigation = true; + /* + * Tx IQ Calibration (ah->config.tx_iq_calibration) is only + * used by AR9003, but it is showing reliability issues. + * It will take a while to fix so this is currently disabled. + */ + /* * We need this for PCI devices only (Cardbus, PCI, miniPCI) * _and_ if on non-uniprocessor systems (Multiprocessor/HT). diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index a78e09bab431..6c84d318e31b 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -261,6 +261,7 @@ struct ath9k_ops_config { #define AR_BASE_FREQ_5GHZ 4900 #define AR_SPUR_FEEQ_BOUND_HT40 19 #define AR_SPUR_FEEQ_BOUND_HT20 10 + bool tx_iq_calibration; /* Only available for >= AR9003 */ int spurmode; u16 spurchans[AR_EEPROM_MODAL_SPURS][2]; u8 max_txtrig_level; From e55537240f97635f9a7c42fac224ff80fa637624 Mon Sep 17 00:00:00 2001 From: Vasanthakumar Thiagarajan Date: Mon, 26 Apr 2010 15:04:33 -0400 Subject: [PATCH 033/109] ath9k_hw: Fix usec to hw clock conversion in 5Ghz for ar9003 Fast clock operation (44Mhz) is enabled for 5Ghz in ar9003, so take care of the conversion from usec to hw clock. Signed-off-by: Vasanthakumar Thiagarajan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/hw.c | 10 ++++++++-- drivers/net/wireless/ath/ath9k/hw.h | 1 + 2 files changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 40b6e8415946..7bb700151ca6 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -25,6 +25,7 @@ #define ATH9K_CLOCK_RATE_CCK 22 #define ATH9K_CLOCK_RATE_5GHZ_OFDM 40 #define ATH9K_CLOCK_RATE_2GHZ_OFDM 44 +#define ATH9K_CLOCK_FAST_RATE_5GHZ_OFDM 44 static bool ath9k_hw_set_reset_reg(struct ath_hw *ah, u32 type); @@ -90,7 +91,11 @@ static u32 ath9k_hw_mac_clks(struct ath_hw *ah, u32 usecs) return usecs *ATH9K_CLOCK_RATE_CCK; if (conf->channel->band == IEEE80211_BAND_2GHZ) return usecs *ATH9K_CLOCK_RATE_2GHZ_OFDM; - return usecs *ATH9K_CLOCK_RATE_5GHZ_OFDM; + + if (ah->caps.hw_caps & ATH9K_HW_CAP_FASTCLOCK) + return usecs * ATH9K_CLOCK_FAST_RATE_5GHZ_OFDM; + else + return usecs * ATH9K_CLOCK_RATE_5GHZ_OFDM; } static u32 ath9k_hw_mac_to_clks(struct ath_hw *ah, u32 usecs) @@ -2188,7 +2193,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) } if (AR_SREV_9300_20_OR_LATER(ah)) { - pCap->hw_caps |= ATH9K_HW_CAP_EDMA | ATH9K_HW_CAP_LDPC; + pCap->hw_caps |= ATH9K_HW_CAP_EDMA | ATH9K_HW_CAP_LDPC | + ATH9K_HW_CAP_FASTCLOCK; pCap->rx_hp_qdepth = ATH9K_HW_RX_HP_QDEPTH; pCap->rx_lp_qdepth = ATH9K_HW_RX_LP_QDEPTH; pCap->rx_status_len = sizeof(struct ar9003_rxs); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 6c84d318e31b..7a1347b2453f 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -198,6 +198,7 @@ enum ath9k_hw_caps { ATH9K_HW_CAP_EDMA = BIT(17), ATH9K_HW_CAP_RAC_SUPPORTED = BIT(18), ATH9K_HW_CAP_LDPC = BIT(19), + ATH9K_HW_CAP_FASTCLOCK = BIT(20), }; enum ath9k_capability_type { From 5b75d0fca5b8cd2657fb240f2112e272a115b2f9 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 26 Apr 2010 15:04:34 -0400 Subject: [PATCH 034/109] ath9k_hw: update EEPROM data structure for AR9280 Adds read access for the 5 GHz fast clock flag Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/eeprom.h | 3 ++- drivers/net/wireless/ath/ath9k/eeprom_def.c | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/eeprom.h b/drivers/net/wireless/ath/ath9k/eeprom.h index fb9c8c92eabe..21354c15a9a9 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom.h +++ b/drivers/net/wireless/ath/ath9k/eeprom.h @@ -300,7 +300,8 @@ struct base_eep_header { u32 binBuildNumber; u8 deviceType; u8 pwdclkind; - u8 futureBase_1[2]; + u8 fastClk5g; + u8 divChain; u8 rxGainType; u8 dacHiPwrMode_5G; u8 openLoopPwrCntl; diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c index cf59799ef307..e591ad6016e5 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_def.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c @@ -274,6 +274,8 @@ static u32 ath9k_hw_def_get_eeprom(struct ath_hw *ah, return pBase->txMask; case EEP_RX_MASK: return pBase->rxMask; + case EEP_FSTCLK_5G: + return pBase->fastClk5g; case EEP_RXGAIN_TYPE: return pBase->rxGainType; case EEP_TXGAIN_TYPE: From 6b42e8d03bef975085c0397806d00fbd1df67eb8 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 26 Apr 2010 15:04:35 -0400 Subject: [PATCH 035/109] ath9k_hw: fix fast clock handling for 5GHz channels Combine multiple checks that were supposed to check for the same conditions, but didn't. Always enable fast PLL clock on AR9280 2.0 Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar5008_phy.c | 5 ++--- drivers/net/wireless/ath/ath9k/ar9002_phy.c | 16 ++++++---------- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 4 ++-- drivers/net/wireless/ath/ath9k/hw.c | 8 ++++++-- drivers/net/wireless/ath/ath9k/hw.h | 5 ++--- 5 files changed, 18 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index de8ce1291a46..b2c17c98bb38 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -850,7 +850,7 @@ static int ar5008_hw_process_ini(struct ath_hw *ah, REG_WRITE_ARRAY(&ah->iniBB_RfGain, freqIndex, regWrites); - if (AR_SREV_9280_20(ah) && IS_CHAN_A_5MHZ_SPACED(chan)) { + if (IS_CHAN_A_FAST_CLOCK(ah, chan)) { REG_WRITE_ARRAY(&ah->iniModesAdditional, modesIndex, regWrites); } @@ -892,8 +892,7 @@ static void ar5008_hw_set_rfmode(struct ath_hw *ah, struct ath9k_channel *chan) rfMode |= (IS_CHAN_5GHZ(chan)) ? AR_PHY_MODE_RF5GHZ : AR_PHY_MODE_RF2GHZ; - if ((AR_SREV_9280_20(ah) || AR_SREV_9300_20_OR_LATER(ah)) - && IS_CHAN_A_5MHZ_SPACED(chan)) + if (IS_CHAN_A_FAST_CLOCK(ah, chan)) rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE); REG_WRITE(ah, AR_PHY_MODE, rfMode); diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index 18cfe1a9781c..ed314e89bfe1 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -455,16 +455,12 @@ static u32 ar9002_hw_compute_pll_control(struct ath_hw *ah, pll |= SM(0x2, AR_RTC_9160_PLL_CLKSEL); if (chan && IS_CHAN_5GHZ(chan)) { - pll |= SM(0x28, AR_RTC_9160_PLL_DIV); - - - if (AR_SREV_9280_20(ah)) { - if (((chan->channel % 20) == 0) - || ((chan->channel % 10) == 0)) - pll = 0x2850; - else - pll = 0x142c; - } + if (IS_CHAN_A_FAST_CLOCK(ah, chan)) + pll = 0x142c; + else if (AR_SREV_9280_20(ah)) + pll = 0x2850; + else + pll |= SM(0x28, AR_RTC_9160_PLL_DIV); } else { pll |= SM(0x2c, AR_RTC_9160_PLL_DIV); } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index bf8ec687f9e0..806f4a54b620 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -583,7 +583,7 @@ static int ar9003_hw_process_ini(struct ath_hw *ah, * For 5GHz channels requiring Fast Clock, apply * different modal values. */ - if (IS_CHAN_A_5MHZ_SPACED(chan)) + if (IS_CHAN_A_FAST_CLOCK(ah, chan)) REG_WRITE_ARRAY(&ah->iniModesAdditional, modesIndex, regWrites); @@ -613,7 +613,7 @@ static void ar9003_hw_set_rfmode(struct ath_hw *ah, rfMode |= (IS_CHAN_B(chan) || IS_CHAN_G(chan)) ? AR_PHY_MODE_DYNAMIC : AR_PHY_MODE_OFDM; - if (IS_CHAN_A_5MHZ_SPACED(chan)) + if (IS_CHAN_A_FAST_CLOCK(ah, chan)) rfMode |= (AR_PHY_MODE_DYNAMIC | AR_PHY_MODE_DYN_CCK_DISABLE); REG_WRITE(ah, AR_PHY_MODE, rfMode); diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 7bb700151ca6..8f37f1c2a380 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1228,8 +1228,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, (chan->channel != ah->curchan->channel) && ((chan->channelFlags & CHANNEL_ALL) == (ah->curchan->channelFlags & CHANNEL_ALL)) && - !(AR_SREV_9280(ah) || IS_CHAN_A_5MHZ_SPACED(chan) || - IS_CHAN_A_5MHZ_SPACED(ah->curchan))) { + !AR_SREV_9280(ah)) { if (ath9k_hw_channel_change(ah, chan)) { ath9k_hw_loadnf(ah, ah->curchan); @@ -2202,6 +2201,11 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) pCap->txs_len = sizeof(struct ar9003_txs); } else { pCap->tx_desc_len = sizeof(struct ath_desc); + if (AR_SREV_9280_20(ah) && + ((ah->eep_ops->get_eeprom(ah, EEP_MINOR_REV) <= + AR5416_EEP_MINOR_VER_16) || + ah->eep_ops->get_eeprom(ah, EEP_FSTCLK_5G))) + pCap->hw_caps |= ATH9K_HW_CAP_FASTCLOCK; } if (AR_SREV_9300_20_OR_LATER(ah)) diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 7a1347b2453f..bc682da28b2a 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -369,10 +369,9 @@ struct ath9k_channel { #define IS_CHAN_2GHZ(_c) (((_c)->channelFlags & CHANNEL_2GHZ) != 0) #define IS_CHAN_HALF_RATE(_c) (((_c)->channelFlags & CHANNEL_HALF) != 0) #define IS_CHAN_QUARTER_RATE(_c) (((_c)->channelFlags & CHANNEL_QUARTER) != 0) -#define IS_CHAN_A_5MHZ_SPACED(_c) \ +#define IS_CHAN_A_FAST_CLOCK(_ah, _c) \ ((((_c)->channelFlags & CHANNEL_5GHZ) != 0) && \ - (((_c)->channel % 20) != 0) && \ - (((_c)->channel % 10) != 0)) + ((_ah)->caps.hw_caps & ATH9K_HW_CAP_FASTCLOCK)) /* These macros check chanmode and not channelFlags */ #define IS_CHAN_B(_c) ((_c)->chanmode == CHANNEL_B) From 7f9f3600695bf68d11cdcf278d39f02eaadc3a00 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 26 Apr 2010 15:04:36 -0400 Subject: [PATCH 036/109] ath9k: wake queue after processing edma rx frames Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/xmit.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index b0d345a675fe..3db19172b43b 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -2290,6 +2290,8 @@ void ath_tx_edma_tasklet(struct ath_softc *sc) ath_tx_complete_buf(sc, bf, txq, &bf_head, &txs, txok, 0); + ath_wake_mac80211_queue(sc, txq); + spin_lock_bh(&txq->axq_lock); if (!list_empty(&txq->txq_fifo_pending)) { INIT_LIST_HEAD(&bf_head); From 597a94b340f98bf4596ef59e938875afaa1815d6 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 26 Apr 2010 15:04:37 -0400 Subject: [PATCH 037/109] ath9k_hw: use the configured power limit for AR9003 Since the new AR9003 EEPROM code does tune the card for the configured tx power level, we need to fill in the correct power limits in the TPC part of the DMA descriptor. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 1 + drivers/net/wireless/ath/ath9k/ar9003_mac.c | 3 +++ drivers/net/wireless/ath/ath9k/hw.h | 1 + 3 files changed, 5 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 5d92be47c5a5..79b0e2874731 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -1817,6 +1817,7 @@ static void ath9k_hw_ar9300_set_txpower(struct ath_hw *ah, u8 twiceMaxRegulatoryPower, u8 powerLimit) { + ah->txpower_limit = powerLimit; ar9003_hw_set_target_power_eeprom(ah, chan->channel); ar9003_hw_calibration_apply(ah, chan->channel); } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mac.c b/drivers/net/wireless/ath/ath9k/ar9003_mac.c index 7d111fbf8bc5..37ba37481a47 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_mac.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_mac.c @@ -311,6 +311,9 @@ static void ar9003_hw_set11n_txdesc(struct ath_hw *ah, void *ds, { struct ar9003_txc *ads = (struct ar9003_txc *) ds; + if (txpower > ah->txpower_limit) + txpower = ah->txpower_limit; + txpower += ah->txpower_indexoffset; if (txpower > 63) txpower = 63; diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index bc682da28b2a..77245dff5993 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -719,6 +719,7 @@ struct ath_hw { u32 *addac5416_21; u32 *bank6Temp; + u8 txpower_limit; int16_t txpower_indexoffset; int coverage_class; u32 beacon_interval; From d10baf99ffd1926c30401342779866ae7d73e2c4 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 26 Apr 2010 15:04:38 -0400 Subject: [PATCH 038/109] ath9k_hw: Fix typos in tx rate power level parsing for AR9003 Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 79b0e2874731..25dd44d54b72 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -1200,7 +1200,7 @@ static u8 ar9003_hw_eeprom_get_tgt_pwr(struct ath_hw *ah, u8 *pFreqBin; if (is2GHz) { - numPiers = AR9300_NUM_5G_20_TARGET_POWERS; + numPiers = AR9300_NUM_2G_20_TARGET_POWERS; pEepromTargetPwr = eep->calTargetPower2G; pFreqBin = eep->calTarget_freqbin_2G; } else { @@ -1236,7 +1236,7 @@ static u8 ar9003_hw_eeprom_get_ht20_tgt_pwr(struct ath_hw *ah, u8 *pFreqBin; if (is2GHz) { - numPiers = AR9300_NUM_5G_20_TARGET_POWERS; + numPiers = AR9300_NUM_2G_20_TARGET_POWERS; pEepromTargetPwr = eep->calTargetPower2GHT20; pFreqBin = eep->calTarget_freqbin_2GHT20; } else { From 0cf31079e98be01baffb22a2e3ad0cbc58420a41 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 26 Apr 2010 15:04:39 -0400 Subject: [PATCH 039/109] ath9k_hw: Fix endian bug in an AR9003 EEPROM field Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 25dd44d54b72..8a79550dff71 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -659,6 +659,9 @@ static void ar9300_swap_eeprom(struct ar9300_eeprom *eep) word = swab16(eep->baseEepHeader.regDmn[1]); eep->baseEepHeader.regDmn[1] = word; + dword = swab32(eep->baseEepHeader.swreg); + eep->baseEepHeader.swreg = dword; + dword = swab32(eep->modalHeader2G.antCtrlCommon); eep->modalHeader2G.antCtrlCommon = dword; From 5d5d44d914623b6122f050ec900ea4016aa3a993 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 26 Apr 2010 15:04:40 -0400 Subject: [PATCH 040/109] ath9k_hw: fix noisefloor timeout handling on AR9003 When the noisefloor calibration times out, do not load -50 into the registers, since this might cause rx issues. Instead, leave enough time for the noise floor calibration to complete until the next check. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_phy.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 806f4a54b620..80431a2f6dc1 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -1093,6 +1093,7 @@ static void ar9003_hw_loadnf(struct ath_hw *ah, struct ath9k_channel *chan) ath_print(common, ATH_DBG_ANY, "Timeout while waiting for nf " "to load: AR_PHY_AGC_CONTROL=0x%x\n", REG_READ(ah, AR_PHY_AGC_CONTROL)); + return; } /* From 5bea40069e46542f5691ec5771edc53e0ca58d71 Mon Sep 17 00:00:00 2001 From: "Luis R. Rodriguez" Date: Mon, 26 Apr 2010 15:04:41 -0400 Subject: [PATCH 041/109] ath9k_hw: Fix TX interrupt mitigation settings TX interrupt mitigation reduces the number of interrupts by addressing several interrupt actions (AR_IMR_TXOK, AR_IMR_TXDESC) all in one interrupt so when enabling it discard setting the other interrupts. Without this TX interrupt mitigation would actually increase the number of interrupts two-fold. We still leave TX interrupt mitigation disabled as it is still being tested. Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/mac.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/mac.c b/drivers/net/wireless/ath/ath9k/mac.c index 7bbf502563bc..0e425cb4bbb1 100644 --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c @@ -878,10 +878,12 @@ enum ath9k_int ath9k_hw_set_interrupts(struct ath_hw *ah, if (ints & ATH9K_INT_TX) { if (ah->config.tx_intr_mitigation) mask |= AR_IMR_TXMINTR | AR_IMR_TXINTM; - if (ah->txok_interrupt_mask) - mask |= AR_IMR_TXOK; - if (ah->txdesc_interrupt_mask) - mask |= AR_IMR_TXDESC; + else { + if (ah->txok_interrupt_mask) + mask |= AR_IMR_TXOK; + if (ah->txdesc_interrupt_mask) + mask |= AR_IMR_TXDESC; + } if (ah->txerr_interrupt_mask) mask |= AR_IMR_TXERR; if (ah->txeol_interrupt_mask) From 740c2679396d60763968ffd16362f1f5c8242172 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 26 Apr 2010 16:08:57 -0400 Subject: [PATCH 042/109] MAINTAINERS: add entry for include/linux/iw_handler.h Signed-off-by: John W. Linville --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index c685ee243415..a43a105c6432 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3882,6 +3882,7 @@ F: net/rfkill/ F: net/wireless/ F: include/net/ieee80211* F: include/linux/wireless.h +F: include/linux/iw_handler.h F: drivers/net/wireless/ NETWORKING DRIVERS From fd8aaaf3519f3fd3c82594e90bc6808072b94d54 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 27 Apr 2010 01:23:35 +0200 Subject: [PATCH 043/109] cfg80211: add ap isolation support This is used to configure APs to not bridge traffic between connected stations. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- include/linux/nl80211.h | 5 +++++ include/net/cfg80211.h | 2 ++ net/wireless/nl80211.c | 4 ++++ 3 files changed, 11 insertions(+) diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 2ea3edeee7aa..f8750f9a65b8 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -709,6 +709,9 @@ enum nl80211_commands { * NL80211_CMD_AUTHENTICATE, NL80211_CMD_DEAUTHENTICATE, * NL80211_CMD_DISASSOCIATE. * + * @NL80211_ATTR_AP_ISOLATE: (AP mode) Do not forward traffic between stations + * connected to this BSS. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -864,6 +867,8 @@ enum nl80211_attrs { NL80211_ATTR_LOCAL_STATE_CHANGE, + NL80211_ATTR_AP_ISOLATE, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 5a4efe54cffd..f6b29bf925d0 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -511,6 +511,7 @@ struct mpath_info { * @basic_rates: basic rates in IEEE 802.11 format * (or NULL for no change) * @basic_rates_len: number of basic rates + * @ap_isolate: do not forward packets between connected stations */ struct bss_parameters { int use_cts_prot; @@ -518,6 +519,7 @@ struct bss_parameters { int use_short_slot_time; u8 *basic_rates; u8 basic_rates_len; + int ap_isolate; }; struct mesh_config { diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index df5505b3930c..c27bef8e0c11 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -151,6 +151,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { [NL80211_ATTR_PS_STATE] = { .type = NLA_U32 }, [NL80211_ATTR_CQM] = { .type = NLA_NESTED, }, [NL80211_ATTR_LOCAL_STATE_CHANGE] = { .type = NLA_FLAG }, + [NL80211_ATTR_AP_ISOLATE] = { .type = NLA_U8 }, }; /* policy for the attributes */ @@ -2441,6 +2442,7 @@ static int nl80211_set_bss(struct sk_buff *skb, struct genl_info *info) params.use_cts_prot = -1; params.use_short_preamble = -1; params.use_short_slot_time = -1; + params.ap_isolate = -1; if (info->attrs[NL80211_ATTR_BSS_CTS_PROT]) params.use_cts_prot = @@ -2457,6 +2459,8 @@ static int nl80211_set_bss(struct sk_buff *skb, struct genl_info *info) params.basic_rates_len = nla_len(info->attrs[NL80211_ATTR_BSS_BASIC_RATES]); } + if (info->attrs[NL80211_ATTR_AP_ISOLATE]) + params.ap_isolate = !!nla_get_u8(info->attrs[NL80211_ATTR_AP_ISOLATE]); rtnl_lock(); From 7b7b5e56d7bdfdd0eb5ea13e6c9613b16b8eac46 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Tue, 27 Apr 2010 01:23:36 +0200 Subject: [PATCH 044/109] mac80211: implement ap isolation support Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- net/mac80211/cfg.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 592f07d2ae5c..e13fb3a62239 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1113,6 +1113,13 @@ static int ieee80211_change_bss(struct wiphy *wiphy, changed |= BSS_CHANGED_BASIC_RATES; } + if (params->ap_isolate >= 0) { + if (params->ap_isolate) + sdata->flags |= IEEE80211_SDATA_DONT_BRIDGE_PACKETS; + else + sdata->flags &= ~IEEE80211_SDATA_DONT_BRIDGE_PACKETS; + } + ieee80211_bss_info_change_notify(sdata, changed); return 0; From 8a8572a821e5763525f5e4ac104bc28fd798fd5e Mon Sep 17 00:00:00 2001 From: Vivek Natarajan Date: Tue, 27 Apr 2010 13:05:37 +0530 Subject: [PATCH 045/109] ath9k_htc: Handle CONF_IDLE during unassociated state to save power. Signed-off-by: Vivek Natarajan Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/htc.h | 1 + drivers/net/wireless/ath/ath9k/htc_drv_main.c | 73 ++++++++++++++----- 2 files changed, 54 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h index b771e20075a5..1ae18bbc4d9e 100644 --- a/drivers/net/wireless/ath/ath9k/htc.h +++ b/drivers/net/wireless/ath/ath9k/htc.h @@ -379,6 +379,7 @@ struct ath9k_htc_priv { struct mutex htc_pm_lock; unsigned long ps_usecount; bool ps_enabled; + bool ps_idle; struct ath_led radio_led; struct ath_led assoc_led; diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index 644776a51ac0..ca7f3a78eb11 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -94,8 +94,11 @@ void ath9k_htc_ps_restore(struct ath9k_htc_priv *priv) if (--priv->ps_usecount != 0) goto unlock; - if (priv->ps_enabled) + if (priv->ps_idle) + ath9k_hw_setpower(priv->ah, ATH9K_PM_FULL_SLEEP); + else if (priv->ps_enabled) ath9k_hw_setpower(priv->ah, ATH9K_PM_NETWORK_SLEEP); + unlock: mutex_unlock(&priv->htc_pm_lock); } @@ -1096,7 +1099,7 @@ fail_tx: return 0; } -static int ath9k_htc_start(struct ieee80211_hw *hw) +static int ath9k_htc_radio_enable(struct ieee80211_hw *hw) { struct ath9k_htc_priv *priv = hw->priv; struct ath_hw *ah = priv->ah; @@ -1112,8 +1115,6 @@ static int ath9k_htc_start(struct ieee80211_hw *hw) "Starting driver with initial channel: %d MHz\n", curchan->center_freq); - mutex_lock(&priv->mutex); - /* setup initial channel */ init_channel = ath9k_cmn_get_curchannel(hw, ah); @@ -1126,7 +1127,7 @@ static int ath9k_htc_start(struct ieee80211_hw *hw) ath_print(common, ATH_DBG_FATAL, "Unable to reset hardware; reset status %d " "(freq %u MHz)\n", ret, curchan->center_freq); - goto mutex_unlock; + return ret; } ath_update_txpow(priv); @@ -1134,16 +1135,8 @@ static int ath9k_htc_start(struct ieee80211_hw *hw) mode = ath9k_htc_get_curmode(priv, init_channel); htc_mode = cpu_to_be16(mode); WMI_CMD_BUF(WMI_SET_MODE_CMDID, &htc_mode); - if (ret) - goto mutex_unlock; - WMI_CMD(WMI_ATH_INIT_CMDID); - if (ret) - goto mutex_unlock; - WMI_CMD(WMI_START_RECV_CMDID); - if (ret) - goto mutex_unlock; ath9k_host_rx_init(priv); @@ -1156,12 +1149,22 @@ static int ath9k_htc_start(struct ieee80211_hw *hw) ieee80211_wake_queues(hw); -mutex_unlock: - mutex_unlock(&priv->mutex); return ret; } -static void ath9k_htc_stop(struct ieee80211_hw *hw) +static int ath9k_htc_start(struct ieee80211_hw *hw) +{ + struct ath9k_htc_priv *priv = hw->priv; + int ret = 0; + + mutex_lock(&priv->mutex); + ret = ath9k_htc_radio_enable(hw); + mutex_unlock(&priv->mutex); + + return ret; +} + +static void ath9k_htc_radio_disable(struct ieee80211_hw *hw) { struct ath9k_htc_priv *priv = hw->priv; struct ath_hw *ah = priv->ah; @@ -1169,11 +1172,8 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw) int ret = 0; u8 cmd_rsp; - mutex_lock(&priv->mutex); - if (priv->op_flags & OP_INVALID) { ath_print(common, ATH_DBG_ANY, "Device not present\n"); - mutex_unlock(&priv->mutex); return; } @@ -1208,11 +1208,20 @@ static void ath9k_htc_stop(struct ieee80211_hw *hw) } priv->op_flags |= OP_INVALID; - mutex_unlock(&priv->mutex); ath_print(common, ATH_DBG_CONFIG, "Driver halt\n"); } +static void ath9k_htc_stop(struct ieee80211_hw *hw) +{ + struct ath9k_htc_priv *priv = hw->priv; + + mutex_lock(&priv->mutex); + ath9k_htc_radio_disable(hw); + mutex_unlock(&priv->mutex); +} + + static int ath9k_htc_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { @@ -1326,6 +1335,23 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed) mutex_lock(&priv->mutex); + if (changed & IEEE80211_CONF_CHANGE_IDLE) { + bool enable_radio = false; + bool idle = !!(conf->flags & IEEE80211_CONF_IDLE); + + if (!idle && priv->ps_idle) + enable_radio = true; + + priv->ps_idle = idle; + + if (enable_radio) { + ath9k_htc_setpower(priv, ATH9K_PM_AWAKE); + ath9k_htc_radio_enable(hw); + ath_print(common, ATH_DBG_CONFIG, + "not-idle: enabling radio\n"); + } + } + if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { struct ieee80211_channel *curchan = hw->conf.channel; int pos = curchan->hw_value; @@ -1369,6 +1395,13 @@ static int ath9k_htc_config(struct ieee80211_hw *hw, u32 changed) } } + if (priv->ps_idle) { + ath_print(common, ATH_DBG_CONFIG, + "idle: disabling radio\n"); + ath9k_htc_radio_disable(hw); + } + + mutex_unlock(&priv->mutex); return 0; From 3a37495268ab45507b4cab9d4cb18c5496ab7a10 Mon Sep 17 00:00:00 2001 From: Vivek Natarajan Date: Tue, 27 Apr 2010 13:05:38 +0530 Subject: [PATCH 046/109] ath9k: Avoid corrupt frames being forwarded to mac80211. If bit 29 is set, MAC H/W can attempt to decrypt the received aggregate with WEP or TKIP, eventhough the received frame may be a CRC failed corrupted frame. If this bit is set, H/W obeys key type in keycache. If it is not set and if the key type in keycache is neither open nor AES, H/W forces key type to be open. But bit 29 should be set to 1 for AsyncFIFO feature to encrypt/decrypt the aggregate with WEP or TKIP. Cc: stable@kernel.org Reported-by: Johan Hovold Signed-off-by: Vivek Natarajan Signed-off-by: Ranga Rao Ravuri Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar5008_initvals.h | 2 +- drivers/net/wireless/ath/ath9k/ar9002_initvals.h | 8 ++++---- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar5008_initvals.h b/drivers/net/wireless/ath/ath9k/ar5008_initvals.h index cd953f6c4628..025c31ac6146 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar5008_initvals.h @@ -249,7 +249,7 @@ static const u32 ar5416Common[][2] = { { 0x00008258, 0x00000000 }, { 0x0000825c, 0x400000ff }, { 0x00008260, 0x00080922 }, - { 0x00008264, 0xa8000010 }, + { 0x00008264, 0x88000010 }, { 0x00008270, 0x00000000 }, { 0x00008274, 0x40000000 }, { 0x00008278, 0x003e4180 }, diff --git a/drivers/net/wireless/ath/ath9k/ar9002_initvals.h b/drivers/net/wireless/ath/ath9k/ar9002_initvals.h index f06313d3bad6..dae7f3304eb8 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9002_initvals.h @@ -793,7 +793,7 @@ static const u32 ar9280Common_9280_2[][2] = { { 0x00008258, 0x00000000 }, { 0x0000825c, 0x400000ff }, { 0x00008260, 0x00080922 }, - { 0x00008264, 0xa8a00010 }, + { 0x00008264, 0x88a00010 }, { 0x00008270, 0x00000000 }, { 0x00008274, 0x40000000 }, { 0x00008278, 0x003e4180 }, @@ -1963,7 +1963,7 @@ static const u32 ar9285Common_9285[][2] = { { 0x00008258, 0x00000000 }, { 0x0000825c, 0x400000ff }, { 0x00008260, 0x00080922 }, - { 0x00008264, 0xa8a00010 }, + { 0x00008264, 0x88a00010 }, { 0x00008270, 0x00000000 }, { 0x00008274, 0x40000000 }, { 0x00008278, 0x003e4180 }, @@ -3185,7 +3185,7 @@ static const u32 ar9287Common_9287_1_0[][2] = { { 0x00008258, 0x00000000 }, { 0x0000825c, 0x400000ff }, { 0x00008260, 0x00080922 }, - { 0x00008264, 0xa8a00010 }, + { 0x00008264, 0x88a00010 }, { 0x00008270, 0x00000000 }, { 0x00008274, 0x40000000 }, { 0x00008278, 0x003e4180 }, @@ -4973,7 +4973,7 @@ static const u32 ar9271Common_9271[][2] = { { 0x00008258, 0x00000000 }, { 0x0000825c, 0x400000ff }, { 0x00008260, 0x00080922 }, - { 0x00008264, 0xa8a00010 }, + { 0x00008264, 0x88a00010 }, { 0x00008270, 0x00000000 }, { 0x00008274, 0x40000000 }, { 0x00008278, 0x003e4180 }, From 195e294d21e88af879da4f88db2ceeb4ec28a755 Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Tue, 27 Apr 2010 12:47:40 +0300 Subject: [PATCH 047/109] mac80211: Determine dynamic PS timeout based on ps-qos network latency Determine the dynamic PS timeout based on the configured ps-qos network latency. For backwards wext compatibility, allow the dynamic PS timeout configured by the cfg80211 to overrule the automatically determined value. Signed-off-by: Juuso Oikarinen Signed-off-by: John W. Linville --- include/net/mac80211.h | 5 ++++- net/mac80211/cfg.c | 4 ++-- net/mac80211/main.c | 2 ++ net/mac80211/mlme.c | 21 +++++++++++++++++++++ 4 files changed, 29 insertions(+), 3 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 7dc5a6790397..c26de6cb12f8 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -668,6 +668,9 @@ enum ieee80211_smps_mode { * @dynamic_ps_timeout: The dynamic powersave timeout (in ms), see the * powersave documentation below. This variable is valid only when * the CONF_PS flag is set. + * @dynamic_ps_forced_timeout: The dynamic powersave timeout (in ms) configured + * by cfg80211 (essentially, wext) If set, this value overrules the value + * chosen by mac80211 based on ps qos network latency. * * @power_level: requested transmit power (in dBm) * @@ -687,7 +690,7 @@ enum ieee80211_smps_mode { */ struct ieee80211_conf { u32 flags; - int power_level, dynamic_ps_timeout; + int power_level, dynamic_ps_timeout, dynamic_ps_forced_timeout; int max_sleep_period; u16 listen_interval; diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index e13fb3a62239..b575a5066219 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1404,11 +1404,11 @@ static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev, return -EOPNOTSUPP; if (enabled == sdata->u.mgd.powersave && - timeout == conf->dynamic_ps_timeout) + timeout == conf->dynamic_ps_forced_timeout) return 0; sdata->u.mgd.powersave = enabled; - conf->dynamic_ps_timeout = timeout; + conf->dynamic_ps_forced_timeout = timeout; /* no change, but if automatic follow powersave */ mutex_lock(&sdata->u.mgd.mtx); diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 4afe851cf8dc..ebcca0eaf1dc 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -569,6 +569,8 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) local->hw.conf.listen_interval = local->hw.max_listen_interval; + local->hw.conf.dynamic_ps_forced_timeout = -1; + result = sta_info_start(local); if (result < 0) goto fail_sta_info; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index d811e3fa1d75..2d1a2bef366d 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -475,6 +475,7 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency) { struct ieee80211_sub_if_data *sdata, *found = NULL; int count = 0; + int timeout; if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) { local->ps_sdata = NULL; @@ -508,6 +509,26 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency) beaconint_us = ieee80211_tu_to_usec( found->vif.bss_conf.beacon_int); + timeout = local->hw.conf.dynamic_ps_forced_timeout; + if (timeout < 0) { + /* + * The 2 second value is there for compatibility until + * the PM_QOS_NETWORK_LATENCY is configured with real + * values. + */ + if (latency == 2000000000) + timeout = 100; + else if (latency <= 50000) + timeout = 300; + else if (latency <= 100000) + timeout = 100; + else if (latency <= 500000) + timeout = 50; + else + timeout = 0; + } + local->hw.conf.dynamic_ps_timeout = timeout; + if (beaconint_us > latency) { local->ps_sdata = NULL; } else { From 9043f3b89abebfbfe4b8d64c7b71b9ac0b9eaa0b Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Tue, 27 Apr 2010 12:47:41 +0300 Subject: [PATCH 048/109] cfg80211: Remove default dynamic PS timeout value Now that the mac80211 is choosing dynamic ps timeouts based on the ps-qos network latency configuration, configure a default value of -1 as the dynamic ps timeout in cfg80211. This value allows the mac80211 to determine the value to be used. Signed-off-by: Juuso Oikarinen Signed-off-by: John W. Linville --- include/net/cfg80211.h | 2 ++ net/wireless/core.c | 3 ++- 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index f6b29bf925d0..7d10c0182f53 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1020,6 +1020,8 @@ struct cfg80211_pmksa { * RSN IE. It allows for faster roaming between WPA2 BSSIDs. * @del_pmksa: Delete a cached PMKID. * @flush_pmksa: Flush all cached PMKIDs. + * @set_power_mgmt: Configure WLAN power management. A timeout value of -1 + * allows the driver to adjust the dynamic ps timeout value. * @set_cqm_rssi_config: Configure connection quality monitor RSSI threshold. * */ diff --git a/net/wireless/core.c b/net/wireless/core.c index 7fdb9409ad2a..40cbbbfbccbf 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -704,7 +704,8 @@ static int cfg80211_netdev_notifier_call(struct notifier_block * nb, wdev->ps = true; else wdev->ps = false; - wdev->ps_timeout = 100; + /* allow mac80211 to determine the timeout */ + wdev->ps_timeout = -1; if (rdev->ops->set_power_mgmt) if (rdev->ops->set_power_mgmt(wdev->wiphy, dev, wdev->ps, From a060bbfe4ee95d115e8f9705a66894ac34e2c475 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 27 Apr 2010 11:59:34 +0200 Subject: [PATCH 049/109] mac80211: give virtual interface to hw_scan When scanning, it is somewhat important to scan on the correct virtual interface. All drivers that currently implement hw_scan only support a single virtual interface, but that may change and then we'd want to be ready. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/at76c50x-usb.c | 1 + drivers/net/wireless/iwlwifi/iwl-core.h | 4 +++- drivers/net/wireless/iwlwifi/iwl-scan.c | 3 ++- drivers/net/wireless/mac80211_hwsim.c | 1 + drivers/net/wireless/wl12xx/wl1251_main.c | 1 + drivers/net/wireless/wl12xx/wl1271_main.c | 1 + include/net/mac80211.h | 2 +- net/mac80211/driver-ops.h | 5 +++-- net/mac80211/driver-trace.h | 9 ++++++--- net/mac80211/scan.c | 4 ++-- 10 files changed, 21 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index 0fb419936dff..7a626d4e100f 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -1889,6 +1889,7 @@ static void at76_dwork_hw_scan(struct work_struct *work) } static int at76_hw_scan(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, struct cfg80211_scan_request *req) { struct at76_priv *priv = hw->priv; diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index a0cc11ecbe93..727360944859 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -512,7 +512,9 @@ static inline __le32 iwl_hw_set_rate_n_flags(u8 rate, u32 flags) void iwl_init_scan_params(struct iwl_priv *priv); int iwl_scan_cancel(struct iwl_priv *priv); int iwl_scan_cancel_timeout(struct iwl_priv *priv, unsigned long ms); -int iwl_mac_hw_scan(struct ieee80211_hw *hw, struct cfg80211_scan_request *req); +int iwl_mac_hw_scan(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct cfg80211_scan_request *req); void iwl_internal_short_hw_scan(struct iwl_priv *priv); int iwl_force_reset(struct iwl_priv *priv, int mode); u16 iwl_fill_probe_req(struct iwl_priv *priv, struct ieee80211_mgmt *frame, diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 1bc1d29f2a07..447c3018296d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -312,7 +312,8 @@ static int iwl_scan_initiate(struct iwl_priv *priv) } int iwl_mac_hw_scan(struct ieee80211_hw *hw, - struct cfg80211_scan_request *req) + struct ieee80211_vif *vif, + struct cfg80211_scan_request *req) { struct iwl_priv *priv = hw->priv; int ret; diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 79bb8833ddb9..d016933d7573 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -973,6 +973,7 @@ static void hw_scan_done(struct work_struct *work) } static int mac80211_hwsim_hw_scan(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, struct cfg80211_scan_request *req) { struct hw_scan_done *hsd = kzalloc(sizeof(*hsd), GFP_KERNEL); diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c index 390cee7e61a1..4d3be80c220e 100644 --- a/drivers/net/wireless/wl12xx/wl1251_main.c +++ b/drivers/net/wireless/wl12xx/wl1251_main.c @@ -856,6 +856,7 @@ out: } static int wl1251_op_hw_scan(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, struct cfg80211_scan_request *req) { struct wl1251 *wl = hw->priv; diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c index 283d5dade1ae..08ff6447dcd9 100644 --- a/drivers/net/wireless/wl12xx/wl1271_main.c +++ b/drivers/net/wireless/wl12xx/wl1271_main.c @@ -1523,6 +1523,7 @@ out: } static int wl1271_op_hw_scan(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, struct cfg80211_scan_request *req) { struct wl1271 *wl = hw->priv; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index c26de6cb12f8..a36e0df5a17c 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1657,7 +1657,7 @@ struct ieee80211_ops { struct ieee80211_key_conf *conf, struct ieee80211_sta *sta, u32 iv32, u16 *phase1key); - int (*hw_scan)(struct ieee80211_hw *hw, + int (*hw_scan)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct cfg80211_scan_request *req); void (*sw_scan_start)(struct ieee80211_hw *hw); void (*sw_scan_complete)(struct ieee80211_hw *hw); diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index d1f8a7c2225a..997008e236ff 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -154,14 +154,15 @@ static inline void drv_update_tkip_key(struct ieee80211_local *local, } static inline int drv_hw_scan(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata, struct cfg80211_scan_request *req) { int ret; might_sleep(); - ret = local->ops->hw_scan(&local->hw, req); - trace_drv_hw_scan(local, req, ret); + ret = local->ops->hw_scan(&local->hw, &sdata->vif, req); + trace_drv_hw_scan(local, sdata, req, ret); return ret; } diff --git a/net/mac80211/driver-trace.h b/net/mac80211/driver-trace.h index e209cb82ff29..ce734b58d07a 100644 --- a/net/mac80211/driver-trace.h +++ b/net/mac80211/driver-trace.h @@ -363,23 +363,26 @@ TRACE_EVENT(drv_update_tkip_key, TRACE_EVENT(drv_hw_scan, TP_PROTO(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata, struct cfg80211_scan_request *req, int ret), - TP_ARGS(local, req, ret), + TP_ARGS(local, sdata, req, ret), TP_STRUCT__entry( LOCAL_ENTRY + VIF_ENTRY __field(int, ret) ), TP_fast_assign( LOCAL_ASSIGN; + VIF_ASSIGN; __entry->ret = ret; ), TP_printk( - LOCAL_PR_FMT " ret:%d", - LOCAL_PR_ARG, __entry->ret + LOCAL_PR_FMT VIF_PR_FMT " ret:%d", + LOCAL_PR_ARG,VIF_PR_ARG, __entry->ret ) ); diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index eb86a5f6e645..2b1f1f3d6a58 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -410,7 +410,7 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata, if (local->ops->hw_scan) { WARN_ON(!ieee80211_prep_hw_scan(local)); - rc = drv_hw_scan(local, local->hw_scan_req); + rc = drv_hw_scan(local, sdata, local->hw_scan_req); } else rc = ieee80211_start_sw_scan(local); @@ -654,7 +654,7 @@ void ieee80211_scan_work(struct work_struct *work) } if (local->hw_scan_req) { - int rc = drv_hw_scan(local, local->hw_scan_req); + int rc = drv_hw_scan(local, sdata, local->hw_scan_req); mutex_unlock(&local->scan_mtx); if (rc) ieee80211_scan_completed(&local->hw, true); From a2c40249a36d0b4d76d1caf6bf806e4ae5b06e8a Mon Sep 17 00:00:00 2001 From: Shanyu Zhao Date: Tue, 27 Apr 2010 11:15:12 -0700 Subject: [PATCH 050/109] mac80211: fix rts threshold check Currently whenever rts thresold is set, every packet will use RTS protection no matter its size exceeds the threshold or not. This is due to a bug in the rts threshold check. if (len > tx->local->hw.wiphy->rts_threshold) { txrc.rts = rts = true; } Basically it is comparing an int (len) and a u32 (rts_threshold), and the variable len is assigned as: len = min_t(int, tx->skb->len + FCS_LEN, tx->local->hw.wiphy->frag_threshold); However, when frag_threshold is "-1", len is always "-1", which is 0xffffffff therefore rts is always set to true. CC: stable@kernel.org Signed-off-by: Shanyu Zhao Reviewed-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/tx.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index e2aa972d584f..f3841f43249e 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -593,7 +593,8 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) struct ieee80211_hdr *hdr = (void *)tx->skb->data; struct ieee80211_supported_band *sband; struct ieee80211_rate *rate; - int i, len; + int i; + u32 len; bool inval = false, rts = false, short_preamble = false; struct ieee80211_tx_rate_control txrc; u32 sta_flags; @@ -602,7 +603,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) sband = tx->local->hw.wiphy->bands[tx->channel->band]; - len = min_t(int, tx->skb->len + FCS_LEN, + len = min_t(u32, tx->skb->len + FCS_LEN, tx->local->hw.wiphy->frag_threshold); /* set up the tx rate control struct we give the RC algo */ From 3377d1b903e50d58a6aecf495092b6e1ffc0cd32 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 26 Apr 2010 16:09:16 -0400 Subject: [PATCH 051/109] mwl8k: remove usage of deprecated noise value Signed-off-by: John W. Linville --- drivers/net/wireless/mwl8k.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 4e58ebe15580..9af6c9454605 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -749,7 +749,6 @@ mwl8k_rxd_8366_ap_process(void *_rxd, struct ieee80211_rx_status *status, memset(status, 0, sizeof(*status)); status->signal = -rxd->rssi; - status->noise = -rxd->noise_floor; if (rxd->rate & MWL8K_8366_AP_RATE_INFO_MCS_FORMAT) { status->flag |= RX_FLAG_HT; @@ -851,7 +850,6 @@ mwl8k_rxd_sta_process(void *_rxd, struct ieee80211_rx_status *status, memset(status, 0, sizeof(*status)); status->signal = -rxd->rssi; - status->noise = -rxd->noise_level; status->antenna = MWL8K_STA_RATE_INFO_ANTSELECT(rate_info); status->rate_idx = MWL8K_STA_RATE_INFO_RATEID(rate_info); From 5d6566ff356a19fb6ad994717cb937ff88063fa6 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 26 Apr 2010 16:09:18 -0400 Subject: [PATCH 052/109] ar9170: remove usage of deprecated noise value Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ar9170/main.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c index fed6695ec04e..cfc6a35a2c6a 100644 --- a/drivers/net/wireless/ath/ar9170/main.c +++ b/drivers/net/wireless/ath/ar9170/main.c @@ -926,7 +926,6 @@ static void ar9170_rx_phy_status(struct ar9170 *ar, /* TODO: we could do something with phy_errors */ status->signal = ar->noise[0] + phy->rssi_combined; - status->noise = ar->noise[0]; } static struct sk_buff *ar9170_rx_copy_data(u8 *buf, int len) From 54c7c91e659f657afa13315189965ecd8ba11d9d Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 26 Apr 2010 16:09:19 -0400 Subject: [PATCH 053/109] ath5k: remove usage of deprecated noise value Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath5k/base.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index a49ede7b87b1..1f3e5b0986c7 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2029,8 +2029,7 @@ accept: rxs->freq = sc->curchan->center_freq; rxs->band = sc->curband->band; - rxs->noise = sc->ah->ah_noise_floor; - rxs->signal = rxs->noise + rs.rs_rssi; + rxs->signal = sc->ah->ah_noise_floor + rs.rs_rssi; rxs->antenna = rs.rs_antenna; From 32a0a33f198d1c0386a39285ea55564340d2d7d7 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 26 Apr 2010 16:09:21 -0400 Subject: [PATCH 054/109] ath9k: remove usage of deprecated noise value Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/common.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath9k/common.c b/drivers/net/wireless/ath/ath9k/common.c index 09effdedc8c0..b4424a623cf5 100644 --- a/drivers/net/wireless/ath/ath9k/common.c +++ b/drivers/net/wireless/ath/ath9k/common.c @@ -212,7 +212,6 @@ int ath9k_cmn_rx_skb_preprocess(struct ath_common *common, rx_status->mactime = ath9k_hw_extend_tsf(ah, rx_stats->rs_tstamp); rx_status->band = hw->conf.channel->band; rx_status->freq = hw->conf.channel->center_freq; - rx_status->noise = common->ani.noise_floor; rx_status->signal = ATH_DEFAULT_NOISE_FLOOR + rx_stats->rs_rssi; rx_status->antenna = rx_stats->rs_antenna; rx_status->flag |= RX_FLAG_TSFT; From 4a277dd8da28b615f4c683b993e01d71f2e3aaec Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 26 Apr 2010 16:09:22 -0400 Subject: [PATCH 055/109] b43: remove usage of deprecated noise value Signed-off-by: John W. Linville --- drivers/net/wireless/b43/xmit.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c index eda06529ef5f..e6b0528f3b52 100644 --- a/drivers/net/wireless/b43/xmit.c +++ b/drivers/net/wireless/b43/xmit.c @@ -610,7 +610,6 @@ void b43_rx(struct b43_wldev *dev, struct sk_buff *skb, const void *_rxhdr) } /* Link quality statistics */ - status.noise = dev->stats.link_noise; if ((chanstat & B43_RX_CHAN_PHYTYPE) == B43_PHYTYPE_N) { // s8 rssi = max(rxhdr->power0, rxhdr->power1); //TODO: Find out what the rssi value is (dBm or percentage?) From 83beaacc2a0441d13f2706105b5ffaf945f84594 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 26 Apr 2010 16:09:23 -0400 Subject: [PATCH 056/109] b43legacy: remove usage of deprecated noise value Signed-off-by: John W. Linville --- drivers/net/wireless/b43legacy/xmit.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/b43legacy/xmit.c b/drivers/net/wireless/b43legacy/xmit.c index 9c8882d9275e..7d177d97f1f7 100644 --- a/drivers/net/wireless/b43legacy/xmit.c +++ b/drivers/net/wireless/b43legacy/xmit.c @@ -548,7 +548,6 @@ void b43legacy_rx(struct b43legacy_wldev *dev, (phystat0 & B43legacy_RX_PHYST0_OFDM), (phystat0 & B43legacy_RX_PHYST0_GAINCTL), (phystat3 & B43legacy_RX_PHYST3_TRSTATE)); - status.noise = dev->stats.link_noise; /* change to support A PHY */ if (phystat0 & B43legacy_RX_PHYST0_OFDM) status.rate_idx = b43legacy_plcp_get_bitrate_idx_ofdm(plcp, false); From 699622a7b5c91cadc08bd77a69711dfbca1df3b1 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 26 Apr 2010 16:09:25 -0400 Subject: [PATCH 057/109] libertas_tf: remove usage of deprecated noise value Signed-off-by: John W. Linville --- drivers/net/wireless/libertas_tf/main.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c index 3b1db84addb5..a6b30d778f5c 100644 --- a/drivers/net/wireless/libertas_tf/main.c +++ b/drivers/net/wireless/libertas_tf/main.c @@ -555,7 +555,6 @@ int lbtf_rx(struct lbtf_private *priv, struct sk_buff *skb) stats.freq = priv->cur_freq; stats.band = IEEE80211_BAND_2GHZ; stats.signal = prxpd->snr; - stats.noise = prxpd->nf; /* Marvell rate index has a hole at value 4 */ if (prxpd->rx_rate > 4) --prxpd->rx_rate; From 0cbb3b5e8e047fddabd4769fe497cb9f7e6f39b9 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 26 Apr 2010 16:09:26 -0400 Subject: [PATCH 058/109] p54: remove usage of deprecated noise value Signed-off-by: John W. Linville --- drivers/net/wireless/p54/txrx.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c index 2ceff5480355..4e6891099d43 100644 --- a/drivers/net/wireless/p54/txrx.c +++ b/drivers/net/wireless/p54/txrx.c @@ -350,7 +350,6 @@ static int p54_rx_data(struct p54_common *priv, struct sk_buff *skb) rx_status->flag |= RX_FLAG_MMIC_ERROR; rx_status->signal = p54_rssi_to_dbm(priv, hdr->rssi); - rx_status->noise = priv->noise; if (hdr->rate & 0x10) rx_status->flag |= RX_FLAG_SHORTPRE; if (priv->hw->conf.channel->band == IEEE80211_BAND_5GHZ) From 6ca4fed3d4ec9887208ea955861fecde4b7a02a1 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 26 Apr 2010 16:09:27 -0400 Subject: [PATCH 059/109] rt2x00: remove usage of deprecated noise value Signed-off-by: John W. Linville Acked-by: Gertjan van Wingerde --- drivers/net/wireless/rt2x00/rt2x00dev.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index b93731b79903..33c2f5fc9dd7 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -434,7 +434,6 @@ void rt2x00lib_rxdone(struct rt2x00_dev *rt2x00dev, rx_status->mactime = rxdesc.timestamp; rx_status->rate_idx = rate_idx; rx_status->signal = rxdesc.rssi; - rx_status->noise = rxdesc.noise; rx_status->flag = rxdesc.flags; rx_status->antenna = rt2x00dev->link.ant.active.rx; From 446cfaa412beef0dd6cb0edf3b4eaed34d824537 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 26 Apr 2010 16:09:28 -0400 Subject: [PATCH 060/109] wl1251: remove usage of deprecated noise value Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1251_rx.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/net/wireless/wl12xx/wl1251_rx.c b/drivers/net/wireless/wl12xx/wl1251_rx.c index b56732226cc0..295203aff66e 100644 --- a/drivers/net/wireless/wl12xx/wl1251_rx.c +++ b/drivers/net/wireless/wl12xx/wl1251_rx.c @@ -73,12 +73,6 @@ static void wl1251_rx_status(struct wl1251 *wl, status->signal = desc->rssi; - /* - * FIXME: guessing that snr needs to be divided by two, otherwise - * the values don't make any sense - */ - status->noise = desc->rssi - desc->snr / 2; - status->freq = ieee80211_channel_to_frequency(desc->channel); status->flag |= RX_FLAG_TSFT; From ca962557c2f2aa14f8032006ce17ebb4ff73db55 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 28 Apr 2010 12:37:46 -0700 Subject: [PATCH 061/109] libertas: fix 8686 firmware loading regression The 'ready' condition was incorrectly evaluated which sometimes lead to failures loading the second-stage firmware on 8686 devices. (This was introduced in "libertas: consolidate SDIO firmware wait code". -- JWL) Signed-off-by: Dan Williams Signed-off-by: John W. Linville --- drivers/net/wireless/libertas/if_sdio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index 68cc407054e3..094176e92ebe 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -323,7 +323,9 @@ static int if_sdio_wait_status(struct if_sdio_card *card, const u8 condition) timeout = jiffies + HZ; while (1) { status = sdio_readb(card->func, IF_SDIO_STATUS, &ret); - if (ret || (status & condition)) + if (ret) + return ret; + if ((status & condition) == condition) break; if (time_after(jiffies, timeout)) return -ETIMEDOUT; From d10e2e02f5a4382ec97ec08e809469fcaae2f0f7 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 27 Apr 2010 16:57:38 -0400 Subject: [PATCH 062/109] rtl8180: use cached queue mapping for skb in rtl8180_tx Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8180_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c index 2b928ecf47bd..c406cc85878b 100644 --- a/drivers/net/wireless/rtl818x/rtl8180_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c @@ -296,7 +296,7 @@ static int rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb) entry->flags = cpu_to_le32(tx_flags); __skb_queue_tail(&ring->queue, skb); if (ring->entries - skb_queue_len(&ring->queue) < 2) - ieee80211_stop_queue(dev, skb_get_queue_mapping(skb)); + ieee80211_stop_queue(dev, prio); spin_unlock_irqrestore(&priv->lock, flags); rtl818x_iowrite8(priv, &priv->map->TX_DMA_POLLING, (1 << (prio + 4))); From 62dad5b0be39aa736fa35e63bf009ab2c574ef8c Mon Sep 17 00:00:00 2001 From: Benoit Papillault Date: Wed, 28 Apr 2010 00:08:24 +0200 Subject: [PATCH 063/109] ath9k: Added get_survey callback in order to get channel noise Signed-off-by: Benoit Papillault Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/main.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index aad370a7f95b..893b552981a0 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2044,6 +2044,25 @@ static int ath9k_ampdu_action(struct ieee80211_hw *hw, return ret; } +static int ath9k_get_survey(struct ieee80211_hw *hw, int idx, + struct survey_info *survey) +{ + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + struct ath_hw *ah = sc->sc_ah; + struct ath_common *common = ath9k_hw_common(ah); + struct ieee80211_conf *conf = &hw->conf; + + if (idx != 0) + return -ENOENT; + + survey->channel = conf->channel; + survey->filled = SURVEY_INFO_NOISE_DBM; + survey->noise = common->ani.noise_floor; + + return 0; +} + static void ath9k_sw_scan_start(struct ieee80211_hw *hw) { struct ath_wiphy *aphy = hw->priv; @@ -2115,6 +2134,7 @@ struct ieee80211_ops ath9k_ops = { .set_tsf = ath9k_set_tsf, .reset_tsf = ath9k_reset_tsf, .ampdu_action = ath9k_ampdu_action, + .get_survey = ath9k_get_survey, .sw_scan_start = ath9k_sw_scan_start, .sw_scan_complete = ath9k_sw_scan_complete, .rfkill_poll = ath9k_rfkill_poll_state, From 16092b5cccd6f3a8d1957ca004c97947e07018db Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Wed, 28 Apr 2010 09:49:59 +0300 Subject: [PATCH 064/109] wl1271: Improve command polling In testing I noticed that the wl1271 commands fall into two categories. In the first category are "fast" commands, these mostly take only 0 or 1 polls to complete, but occasionally upto 50 (giving a 0.5ms execution time.) In the second category, the command completion takes well more than 0.5ms (from 1.5ms upwards.) This patch fixes command polling such that it is optimal for the fast commands, but also allows sleep for the longer ones. Signed-off-by: Juuso Oikarinen Reviewed-by: Luciano Coelho Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1271_cmd.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c index b19090334bc0..564526d81279 100644 --- a/drivers/net/wireless/wl12xx/wl1271_cmd.c +++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c @@ -36,7 +36,7 @@ #include "wl1271_cmd.h" #include "wl1271_event.h" -#define WL1271_CMD_POLL_COUNT 5 +#define WL1271_CMD_FAST_POLL_COUNT 50 /* * send command to firmware @@ -76,11 +76,11 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len, goto out; } - udelay(10); poll_count++; - if (poll_count == WL1271_CMD_POLL_COUNT) - wl1271_info("cmd polling took over %d cycles", - poll_count); + if (poll_count < WL1271_CMD_FAST_POLL_COUNT) + udelay(10); + else + msleep(1); intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); } From 141418c7ed22849449f39f8938c9cf0eae6c524f Mon Sep 17 00:00:00 2001 From: Saravanan Dhanabal Date: Wed, 28 Apr 2010 09:50:00 +0300 Subject: [PATCH 065/109] wl1271: Configure QOS nullfunc template for U-APSD When U-APSD is enabled, device is not sending power save state notifications to AP using QOS nullfunc frames. This patch configures nullfunc templates needed for U-APSD. Signed-off-by: Saravanan Dhanabal Reviewed-by: Juuso Oikarinen Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1271_main.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c index 08ff6447dcd9..c160e5ad1e57 100644 --- a/drivers/net/wireless/wl12xx/wl1271_main.c +++ b/drivers/net/wireless/wl12xx/wl1271_main.c @@ -1707,6 +1707,10 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, if (ret < 0) goto out_sleep; + ret = wl1271_build_qos_null_data(wl); + if (ret < 0) + goto out_sleep; + /* filter out all packets not from this BSSID */ wl1271_configure_filters(wl, 0); From 82429d32ca3bae9d67faa32ffbc989be2e63094f Mon Sep 17 00:00:00 2001 From: Juuso Oikarinen Date: Wed, 28 Apr 2010 09:50:01 +0300 Subject: [PATCH 066/109] wl1271: Rewrite hardware keep-alive handling The driver had a join command without keep-alive restart procedures in the channel changing code. After associated scans, the mac80211 does re-set the current channel, causing the join to occur. This would stop the hardware keep alive. To make the joins safer in this respect, this patch adds a join function that does the hardware-keep-alive magic along the join. This is now invoked in the above mentioned scenario, and also other scenarios. Signed-off-by: Juuso Oikarinen Reviewed-by: Teemu Paasikivi Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1271_main.c | 91 ++++++++++++----------- 1 file changed, 46 insertions(+), 45 deletions(-) diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c index c160e5ad1e57..a794d5ed8c60 100644 --- a/drivers/net/wireless/wl12xx/wl1271_main.c +++ b/drivers/net/wireless/wl12xx/wl1271_main.c @@ -1117,14 +1117,13 @@ static void wl1271_configure_filters(struct wl1271 *wl, unsigned int filters) } } -static int wl1271_join_channel(struct wl1271 *wl, int channel) +static int wl1271_dummy_join(struct wl1271 *wl) { int ret = 0; /* we need to use a dummy BSSID for now */ static const u8 dummy_bssid[ETH_ALEN] = { 0x0b, 0xad, 0xde, 0xad, 0xbe, 0xef }; - wl->channel = channel; memcpy(wl->bssid, dummy_bssid, ETH_ALEN); /* pass through frames from all BSS */ @@ -1140,7 +1139,47 @@ out: return ret; } -static int wl1271_unjoin_channel(struct wl1271 *wl) +static int wl1271_join(struct wl1271 *wl) +{ + int ret; + + ret = wl1271_cmd_join(wl, wl->set_bss_type); + if (ret < 0) + goto out; + + set_bit(WL1271_FLAG_JOINED, &wl->flags); + + if (!test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) + goto out; + + /* + * The join command disable the keep-alive mode, shut down its process, + * and also clear the template config, so we need to reset it all after + * the join. The acx_aid starts the keep-alive process, and the order + * of the commands below is relevant. + */ + ret = wl1271_acx_keep_alive_mode(wl, true); + if (ret < 0) + goto out; + + ret = wl1271_acx_aid(wl, wl->aid); + if (ret < 0) + goto out; + + ret = wl1271_cmd_build_klv_null_data(wl); + if (ret < 0) + goto out; + + ret = wl1271_acx_keep_alive_config(wl, CMD_TEMPL_KLV_IDX_NULL_DATA, + ACX_KEEP_ALIVE_TPL_VALID); + if (ret < 0) + goto out; + +out: + return ret; +} + +static int wl1271_unjoin(struct wl1271 *wl) { int ret; @@ -1230,7 +1269,7 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed) "failed %d", ret); if (test_bit(WL1271_FLAG_JOINED, &wl->flags)) { - ret = wl1271_cmd_join(wl, wl->set_bss_type); + ret = wl1271_join(wl); if (ret < 0) wl1271_warning("cmd join to update channel " "failed %d", ret); @@ -1240,9 +1279,9 @@ static int wl1271_op_config(struct ieee80211_hw *hw, u32 changed) if (changed & IEEE80211_CONF_CHANGE_IDLE) { if (conf->flags & IEEE80211_CONF_IDLE && test_bit(WL1271_FLAG_JOINED, &wl->flags)) - wl1271_unjoin_channel(wl); + wl1271_unjoin(wl); else if (!(conf->flags & IEEE80211_CONF_IDLE)) - wl1271_join_channel(wl, channel); + wl1271_dummy_join(wl); if (conf->flags & IEEE80211_CONF_IDLE) { wl->rate_set = wl1271_min_rate_get(wl); @@ -1612,7 +1651,6 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, enum wl1271_cmd_ps_mode mode; struct wl1271 *wl = hw->priv; bool do_join = false; - bool do_keepalive = false; int ret; wl1271_debug(DEBUG_MAC80211, "mac80211 bss info changed"); @@ -1755,19 +1793,6 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, ret = wl1271_cmd_build_probe_req(wl, NULL, 0, NULL, 0, wl->band); - /* Enable the keep-alive feature */ - ret = wl1271_acx_keep_alive_mode(wl, true); - if (ret < 0) - goto out_sleep; - - /* - * This is awkward. The keep-alive configs must be done - * *after* the join command, because otherwise it will - * not work, but it must only be done *once* because - * otherwise the firmware will start complaining. - */ - do_keepalive = true; - /* enable the connection monitoring feature */ ret = wl1271_acx_conn_monit_params(wl, true); if (ret < 0) @@ -1835,35 +1860,11 @@ static void wl1271_op_bss_info_changed(struct ieee80211_hw *hw, } if (do_join) { - ret = wl1271_cmd_join(wl, wl->set_bss_type); + ret = wl1271_join(wl); if (ret < 0) { wl1271_warning("cmd join failed %d", ret); goto out_sleep; } - set_bit(WL1271_FLAG_JOINED, &wl->flags); - } - - /* - * The JOIN operation shuts down the firmware keep-alive as a side - * effect, and the ACX_AID will start the keep-alive as a side effect. - * Hence, for non-IBSS, the ACX_AID must always happen *after* the - * JOIN operation, and the template config after the ACX_AID. - */ - if (test_bit(WL1271_FLAG_STA_ASSOCIATED, &wl->flags)) { - ret = wl1271_acx_aid(wl, wl->aid); - if (ret < 0) - goto out_sleep; - } - - if (do_keepalive) { - ret = wl1271_cmd_build_klv_null_data(wl); - if (ret < 0) - goto out_sleep; - ret = wl1271_acx_keep_alive_config( - wl, CMD_TEMPL_KLV_IDX_NULL_DATA, - ACX_KEEP_ALIVE_TPL_VALID); - if (ret < 0) - goto out_sleep; } out_sleep: From 23a7a51c5a35b30aa3edcc31a6a57b01c523b4cd Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Wed, 28 Apr 2010 09:50:02 +0300 Subject: [PATCH 067/109] wl1271: fix a bunch of sparse warnings A couple of sparse warnings in some rate settings (missing cpu_to_le32) were fixed. Changed the conf_sg_settings struct from le to native endianess. The values are converted to le when copying them to the acx command instead. Reported-by: Johannes Berg Signed-off-by: Luciano Coelho Reviewed-by: Juuso Oikarinen Signed-off-by: John W. Linville --- drivers/net/wireless/wl12xx/wl1271_acx.c | 2 +- drivers/net/wireless/wl12xx/wl1271_boot.c | 8 ++++---- drivers/net/wireless/wl12xx/wl1271_cmd.c | 4 ++-- drivers/net/wireless/wl12xx/wl1271_conf.h | 2 +- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c index 1a6b2ec1db58..4ed4036d6b68 100644 --- a/drivers/net/wireless/wl12xx/wl1271_acx.c +++ b/drivers/net/wireless/wl12xx/wl1271_acx.c @@ -589,7 +589,7 @@ int wl1271_acx_sg_cfg(struct wl1271 *wl) /* BT-WLAN coext parameters */ for (i = 0; i < CONF_SG_PARAMS_MAX; i++) - param->params[i] = c->params[i]; + param->params[i] = cpu_to_le32(c->params[i]); param->param_idx = CONF_SG_PARAMS_ALL; ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param)); diff --git a/drivers/net/wireless/wl12xx/wl1271_boot.c b/drivers/net/wireless/wl12xx/wl1271_boot.c index f16d15bd5643..7e797157783e 100644 --- a/drivers/net/wireless/wl12xx/wl1271_boot.c +++ b/drivers/net/wireless/wl12xx/wl1271_boot.c @@ -350,7 +350,7 @@ static int wl1271_boot_soft_reset(struct wl1271 *wl) static int wl1271_boot_run_firmware(struct wl1271 *wl) { int loop, ret; - u32 chip_id, interrupt; + u32 chip_id, intr; wl1271_boot_set_ecpu_ctrl(wl, ECPU_CONTROL_HALT); @@ -367,15 +367,15 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl) loop = 0; while (loop++ < INIT_LOOP) { udelay(INIT_LOOP_DELAY); - interrupt = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); + intr = wl1271_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); - if (interrupt == 0xffffffff) { + if (intr == 0xffffffff) { wl1271_error("error reading hardware complete " "init indication"); return -EIO; } /* check that ACX_INTR_INIT_COMPLETE is enabled */ - else if (interrupt & WL1271_ACX_INTR_INIT_COMPLETE) { + else if (intr & WL1271_ACX_INTR_INIT_COMPLETE) { wl1271_write32(wl, ACX_REG_INTERRUPT_ACK, WL1271_ACX_INTR_INIT_COMPLETE); break; diff --git a/drivers/net/wireless/wl12xx/wl1271_cmd.c b/drivers/net/wireless/wl12xx/wl1271_cmd.c index 564526d81279..4292f8dc2a80 100644 --- a/drivers/net/wireless/wl12xx/wl1271_cmd.c +++ b/drivers/net/wireless/wl12xx/wl1271_cmd.c @@ -317,7 +317,7 @@ int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type) join->rx_config_options = cpu_to_le32(wl->rx_config); join->rx_filter_options = cpu_to_le32(wl->rx_filter); join->bss_type = bss_type; - join->basic_rate_set = wl->basic_rate_set; + join->basic_rate_set = cpu_to_le32(wl->basic_rate_set); if (wl->band == IEEE80211_BAND_5GHZ) join->bss_type |= WL1271_JOIN_CMD_BSS_TYPE_5GHZ; @@ -614,7 +614,7 @@ int wl1271_cmd_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len, params->params.scan_options = cpu_to_le16(scan_options); params->params.num_probe_requests = probe_requests; - params->params.tx_rate = rate; + params->params.tx_rate = cpu_to_le32(rate); params->params.tid_trigger = 0; params->params.scan_tag = WL1271_SCAN_DEFAULT_TAG; diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h index c44307c4bcf8..d046d044b5bd 100644 --- a/drivers/net/wireless/wl12xx/wl1271_conf.h +++ b/drivers/net/wireless/wl12xx/wl1271_conf.h @@ -401,7 +401,7 @@ enum { }; struct conf_sg_settings { - __le32 params[CONF_SG_PARAMS_MAX]; + u32 params[CONF_SG_PARAMS_MAX]; u8 state; }; From baff8006b58bb7fca5d1ea1825bc8c6486900303 Mon Sep 17 00:00:00 2001 From: Helmut Schaa Date: Wed, 28 Apr 2010 09:58:59 +0200 Subject: [PATCH 068/109] rt2x00: rt2800lib: update rfcsr & bbp init code for SoC devices Update the rfcsr and bbp init code for SoC devices to match with the latest Ralink driver. To have better control over which values are used for the register initialization create a new function rt2800_is_305x_soc which checks for SoC interface type, the correct RT chipset and the correct RF chipset. This is based on the assumption that all rt305x SoC devices use a rt2872 and rf3020/rf3021/rf3022. In case an unknown RF chipset is found on a SoC device with a rt2872 don't treat it as rt305x and just print a message. Signed-off-by: Helmut Schaa Acked-by: Gertjan van Wingerde Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 43 +++++++++++++++++++------ 1 file changed, 34 insertions(+), 9 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 12a49e0c4ac5..674609d1a727 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -75,6 +75,23 @@ MODULE_LICENSE("GPL"); rt2800_regbusy_read((__dev), H2M_MAILBOX_CSR, \ H2M_MAILBOX_CSR_OWNER, (__reg)) +static inline bool rt2800_is_305x_soc(struct rt2x00_dev *rt2x00dev) +{ + /* check for rt2872 on SoC */ + if (!rt2x00_is_soc(rt2x00dev) || + !rt2x00_rt(rt2x00dev, RT2872)) + return false; + + /* we know for sure that these rf chipsets are used on rt305x boards */ + if (rt2x00_rf(rt2x00dev, RF3020) || + rt2x00_rf(rt2x00dev, RF3021) || + rt2x00_rf(rt2x00dev, RF3022)) + return true; + + NOTICE(rt2x00dev, "Unknown RF chipset on rt305x\n"); + return false; +} + static void rt2800_bbp_write(struct rt2x00_dev *rt2x00dev, const unsigned int word, const u8 value) { @@ -1555,6 +1572,9 @@ int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) rt2800_wait_bbp_ready(rt2x00dev))) return -EACCES; + if (rt2800_is_305x_soc(rt2x00dev)) + rt2800_bbp_write(rt2x00dev, 31, 0x08); + rt2800_bbp_write(rt2x00dev, 65, 0x2c); rt2800_bbp_write(rt2x00dev, 66, 0x38); @@ -1575,6 +1595,9 @@ int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) rt2800_bbp_write(rt2x00dev, 79, 0x13); rt2800_bbp_write(rt2x00dev, 80, 0x05); rt2800_bbp_write(rt2x00dev, 81, 0x33); + } else if (rt2800_is_305x_soc(rt2x00dev)) { + rt2800_bbp_write(rt2x00dev, 78, 0x0e); + rt2800_bbp_write(rt2x00dev, 80, 0x08); } else { rt2800_bbp_write(rt2x00dev, 81, 0x37); } @@ -1595,12 +1618,16 @@ int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) if (rt2x00_rt_rev_gte(rt2x00dev, RT3070, REV_RT3070F) || rt2x00_rt_rev_gte(rt2x00dev, RT3071, REV_RT3071E) || rt2x00_rt_rev_gte(rt2x00dev, RT3090, REV_RT3090E) || - rt2x00_rt_rev_gte(rt2x00dev, RT3390, REV_RT3390E)) + rt2x00_rt_rev_gte(rt2x00dev, RT3390, REV_RT3390E) || + rt2800_is_305x_soc(rt2x00dev)) rt2800_bbp_write(rt2x00dev, 103, 0xc0); else rt2800_bbp_write(rt2x00dev, 103, 0x00); - rt2800_bbp_write(rt2x00dev, 105, 0x05); + if (rt2800_is_305x_soc(rt2x00dev)) + rt2800_bbp_write(rt2x00dev, 105, 0x01); + else + rt2800_bbp_write(rt2x00dev, 105, 0x05); rt2800_bbp_write(rt2x00dev, 106, 0x35); if (rt2x00_rt(rt2x00dev, RT3071) || @@ -1617,11 +1644,6 @@ int rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) rt2800_bbp_write(rt2x00dev, 138, value); } - if (rt2x00_rt(rt2x00dev, RT2872)) { - rt2800_bbp_write(rt2x00dev, 31, 0x08); - rt2800_bbp_write(rt2x00dev, 78, 0x0e); - rt2800_bbp_write(rt2x00dev, 80, 0x08); - } for (i = 0; i < EEPROM_BBP_SIZE; i++) { rt2x00_eeprom_read(rt2x00dev, EEPROM_BBP_START + i, &eeprom); @@ -1708,7 +1730,7 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) !rt2x00_rt(rt2x00dev, RT3071) && !rt2x00_rt(rt2x00dev, RT3090) && !rt2x00_rt(rt2x00dev, RT3390) && - !(rt2x00_is_soc(rt2x00dev) && rt2x00_rt(rt2x00dev, RT2872))) + !rt2800_is_305x_soc(rt2x00dev)) return 0; /* @@ -1776,7 +1798,7 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) rt2800_rfcsr_write(rt2x00dev, 29, 0x8f); rt2800_rfcsr_write(rt2x00dev, 30, 0x20); rt2800_rfcsr_write(rt2x00dev, 31, 0x0f); - } else if (rt2x00_rt(rt2x00dev, RT2872)) { + } else if (rt2800_is_305x_soc(rt2x00dev)) { rt2800_rfcsr_write(rt2x00dev, 0, 0x50); rt2800_rfcsr_write(rt2x00dev, 1, 0x01); rt2800_rfcsr_write(rt2x00dev, 2, 0xf7); @@ -1807,6 +1829,9 @@ int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) rt2800_rfcsr_write(rt2x00dev, 27, 0x23); rt2800_rfcsr_write(rt2x00dev, 28, 0x13); rt2800_rfcsr_write(rt2x00dev, 29, 0x83); + rt2800_rfcsr_write(rt2x00dev, 30, 0x00); + rt2800_rfcsr_write(rt2x00dev, 31, 0x00); + return 0; } if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) { From f7f7cc47fce6f01c3d3374c51508859c328ad5b2 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 28 Apr 2010 11:01:15 +0200 Subject: [PATCH 069/109] iwl: cleanup: remove unneeded error handling This is just a cleanup and doesn't change how the code works. debugfs_create_dir() and debugfs_create_file() return an error pointer (-ENODEV) if CONFIG_DEBUG_FS is not enabled, otherwise if an error occurs they return NULL. This is how they are implemented and what it says in the DebugFS documentation. DebugFS can not be compiled as a module. As a result, we only need to check for error pointers and particularly -ENODEV one time to know that DebugFS is enabled. This patch keeps the first check for error pointers and removes the rest. The other reason for this patch, is that it silences some Smatch warnings. Smatch sees the condition "(result != -ENODEV)" and assumes that it's possible for "result" to equal -ENODEV. If it were possible it would lead to an error pointer dereference. But since it's not, we can just remove the check. Signed-off-by: Dan Carpenter Signed-off-by: John W. Linville --- drivers/net/wireless/iwmc3200wifi/debugfs.c | 63 --------------------- 1 file changed, 63 deletions(-) diff --git a/drivers/net/wireless/iwmc3200wifi/debugfs.c b/drivers/net/wireless/iwmc3200wifi/debugfs.c index 48930c1a0f76..c916152bb936 100644 --- a/drivers/net/wireless/iwmc3200wifi/debugfs.c +++ b/drivers/net/wireless/iwmc3200wifi/debugfs.c @@ -442,40 +442,10 @@ int iwm_debugfs_init(struct iwm_priv *iwm) snprintf(devdir, sizeof(devdir), "%s", wiphy_name(iwm_to_wiphy(iwm))); iwm->dbg.devdir = debugfs_create_dir(devdir, iwm->dbg.rootdir); - result = PTR_ERR(iwm->dbg.devdir); - if (IS_ERR(iwm->dbg.devdir) && (result != -ENODEV)) { - IWM_ERR(iwm, "Couldn't create devdir: %d\n", result); - goto error; - } - iwm->dbg.dbgdir = debugfs_create_dir("debug", iwm->dbg.devdir); - result = PTR_ERR(iwm->dbg.dbgdir); - if (IS_ERR(iwm->dbg.dbgdir) && (result != -ENODEV)) { - IWM_ERR(iwm, "Couldn't create dbgdir: %d\n", result); - goto error; - } - iwm->dbg.rxdir = debugfs_create_dir("rx", iwm->dbg.devdir); - result = PTR_ERR(iwm->dbg.rxdir); - if (IS_ERR(iwm->dbg.rxdir) && (result != -ENODEV)) { - IWM_ERR(iwm, "Couldn't create rx dir: %d\n", result); - goto error; - } - iwm->dbg.txdir = debugfs_create_dir("tx", iwm->dbg.devdir); - result = PTR_ERR(iwm->dbg.txdir); - if (IS_ERR(iwm->dbg.txdir) && (result != -ENODEV)) { - IWM_ERR(iwm, "Couldn't create tx dir: %d\n", result); - goto error; - } - iwm->dbg.busdir = debugfs_create_dir("bus", iwm->dbg.devdir); - result = PTR_ERR(iwm->dbg.busdir); - if (IS_ERR(iwm->dbg.busdir) && (result != -ENODEV)) { - IWM_ERR(iwm, "Couldn't create bus dir: %d\n", result); - goto error; - } - if (iwm->bus_ops->debugfs_init) { result = iwm->bus_ops->debugfs_init(iwm, iwm->dbg.busdir); if (result < 0) { @@ -484,27 +454,15 @@ int iwm_debugfs_init(struct iwm_priv *iwm) } } - iwm->dbg.dbg_level = IWM_DL_NONE; iwm->dbg.dbg_level_dentry = debugfs_create_file("level", 0200, iwm->dbg.dbgdir, iwm, &fops_iwm_dbg_level); - result = PTR_ERR(iwm->dbg.dbg_level_dentry); - if (IS_ERR(iwm->dbg.dbg_level_dentry) && (result != -ENODEV)) { - IWM_ERR(iwm, "Couldn't create dbg_level: %d\n", result); - goto error; - } - iwm->dbg.dbg_modules = IWM_DM_DEFAULT; iwm->dbg.dbg_modules_dentry = debugfs_create_file("modules", 0200, iwm->dbg.dbgdir, iwm, &fops_iwm_dbg_modules); - result = PTR_ERR(iwm->dbg.dbg_modules_dentry); - if (IS_ERR(iwm->dbg.dbg_modules_dentry) && (result != -ENODEV)) { - IWM_ERR(iwm, "Couldn't create dbg_modules: %d\n", result); - goto error; - } for (i = 0; i < __IWM_DM_NR; i++) add_dbg_module(iwm->dbg, iwm_debug_module[i].name, @@ -513,39 +471,18 @@ int iwm_debugfs_init(struct iwm_priv *iwm) iwm->dbg.txq_dentry = debugfs_create_file("queues", 0200, iwm->dbg.txdir, iwm, &iwm_debugfs_txq_fops); - result = PTR_ERR(iwm->dbg.txq_dentry); - if (IS_ERR(iwm->dbg.txq_dentry) && (result != -ENODEV)) { - IWM_ERR(iwm, "Couldn't create tx queue: %d\n", result); - goto error; - } iwm->dbg.tx_credit_dentry = debugfs_create_file("credits", 0200, iwm->dbg.txdir, iwm, &iwm_debugfs_tx_credit_fops); - result = PTR_ERR(iwm->dbg.tx_credit_dentry); - if (IS_ERR(iwm->dbg.tx_credit_dentry) && (result != -ENODEV)) { - IWM_ERR(iwm, "Couldn't create tx credit: %d\n", result); - goto error; - } iwm->dbg.rx_ticket_dentry = debugfs_create_file("tickets", 0200, iwm->dbg.rxdir, iwm, &iwm_debugfs_rx_ticket_fops); - result = PTR_ERR(iwm->dbg.rx_ticket_dentry); - if (IS_ERR(iwm->dbg.rx_ticket_dentry) && (result != -ENODEV)) { - IWM_ERR(iwm, "Couldn't create rx ticket: %d\n", result); - goto error; - } iwm->dbg.fw_err_dentry = debugfs_create_file("last_fw_err", 0200, iwm->dbg.dbgdir, iwm, &iwm_debugfs_fw_err_fops); - result = PTR_ERR(iwm->dbg.fw_err_dentry); - if (IS_ERR(iwm->dbg.fw_err_dentry) && (result != -ENODEV)) { - IWM_ERR(iwm, "Couldn't create last FW err: %d\n", result); - goto error; - } - return 0; From f0b058b61711ebf5be94d6865ca7b2c259b71d37 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 28 Apr 2010 15:17:03 +0200 Subject: [PATCH 070/109] mac80211: do not wip out old supported rates Use old supported rates, if AP do not provide supported rates information element in a new managment frame. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- net/mac80211/scan.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 2b1f1f3d6a58..a9d40584e383 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -84,7 +84,7 @@ ieee80211_bss_info_update(struct ieee80211_local *local, { struct cfg80211_bss *cbss; struct ieee80211_bss *bss; - int clen; + int clen, srlen; s32 signal = 0; if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM) @@ -113,23 +113,24 @@ ieee80211_bss_info_update(struct ieee80211_local *local, bss->dtim_period = tim_ie->dtim_period; } - bss->supp_rates_len = 0; + /* replace old supported rates if we get new values */ + srlen = 0; if (elems->supp_rates) { - clen = IEEE80211_MAX_SUPP_RATES - bss->supp_rates_len; + clen = IEEE80211_MAX_SUPP_RATES; if (clen > elems->supp_rates_len) clen = elems->supp_rates_len; - memcpy(&bss->supp_rates[bss->supp_rates_len], elems->supp_rates, - clen); - bss->supp_rates_len += clen; + memcpy(bss->supp_rates, elems->supp_rates, clen); + srlen += clen; } if (elems->ext_supp_rates) { - clen = IEEE80211_MAX_SUPP_RATES - bss->supp_rates_len; + clen = IEEE80211_MAX_SUPP_RATES - srlen; if (clen > elems->ext_supp_rates_len) clen = elems->ext_supp_rates_len; - memcpy(&bss->supp_rates[bss->supp_rates_len], - elems->ext_supp_rates, clen); - bss->supp_rates_len += clen; + memcpy(bss->supp_rates + srlen, elems->ext_supp_rates, clen); + srlen += clen; } + if (srlen) + bss->supp_rates_len = srlen; bss->wmm_used = elems->wmm_param || elems->wmm_info; bss->uapsd_supported = is_uapsd_supported(elems); From 76f273640134f3eb8257179cd5b3bc6ba5fe4a96 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 28 Apr 2010 17:03:15 +0200 Subject: [PATCH 071/109] mac80211: fix supported rates IE if AP doesn't give us it's rates If AP do not provide us supported rates before assiociation, send all rates we are supporting instead of empty information element. v1 -> v2: Add comment. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville --- net/mac80211/work.c | 28 +++++++++++++++++++--------- 1 file changed, 19 insertions(+), 9 deletions(-) diff --git a/net/mac80211/work.c b/net/mac80211/work.c index 7bd8670379de..4c7de72c27e7 100644 --- a/net/mac80211/work.c +++ b/net/mac80211/work.c @@ -212,15 +212,25 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata, sband = local->hw.wiphy->bands[wk->chan->band]; - /* - * Get all rates supported by the device and the AP as - * some APs don't like getting a superset of their rates - * in the association request (e.g. D-Link DAP 1353 in - * b-only mode)... - */ - rates_len = ieee80211_compatible_rates(wk->assoc.supp_rates, - wk->assoc.supp_rates_len, - sband, &rates); + if (wk->assoc.supp_rates_len) { + /* + * Get all rates supported by the device and the AP as + * some APs don't like getting a superset of their rates + * in the association request (e.g. D-Link DAP 1353 in + * b-only mode)... + */ + rates_len = ieee80211_compatible_rates(wk->assoc.supp_rates, + wk->assoc.supp_rates_len, + sband, &rates); + } else { + /* + * In case AP not provide any supported rates information + * before association, we send information element(s) with + * all rates that we support. + */ + rates = ~0; + rates_len = sband->n_bitrates; + } skb = alloc_skb(local->hw.extra_tx_headroom + sizeof(*mgmt) + /* bit too much but doesn't matter */ From 8fc214ba958648ab111a173f2db7b0e1dfed5b11 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 28 Apr 2010 17:40:43 +0200 Subject: [PATCH 072/109] mac80211: notify driver about IBSS status Some drivers (e.g. iwlwifi) need to know and try to figure it out based on other things, but making it explicit is definitely better. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- include/net/mac80211.h | 6 +++++- net/mac80211/ibss.c | 6 +++++- 2 files changed, 10 insertions(+), 2 deletions(-) diff --git a/include/net/mac80211.h b/include/net/mac80211.h index a36e0df5a17c..2879c8ef5571 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -145,6 +145,7 @@ struct ieee80211_low_level_stats { * @BSS_CHANGED_BEACON_ENABLED: Beaconing should be * enabled/disabled (beaconing modes) * @BSS_CHANGED_CQM: Connection quality monitor config changed + * @BSS_CHANGED_IBSS: IBSS join status changed */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -158,6 +159,7 @@ enum ieee80211_bss_change { BSS_CHANGED_BEACON = 1<<8, BSS_CHANGED_BEACON_ENABLED = 1<<9, BSS_CHANGED_CQM = 1<<10, + BSS_CHANGED_IBSS = 1<<11, }; /** @@ -167,6 +169,8 @@ enum ieee80211_bss_change { * to that BSS) that can change during the lifetime of the BSS. * * @assoc: association status + * @ibss_joined: indicates whether this station is part of an IBSS + * or not * @aid: association ID number, valid only when @assoc is true * @use_cts_prot: use CTS protection * @use_short_preamble: use 802.11b short preamble; @@ -194,7 +198,7 @@ enum ieee80211_bss_change { struct ieee80211_bss_conf { const u8 *bssid; /* association related data */ - bool assoc; + bool assoc, ibss_joined; u16 aid; /* erp related data */ bool use_cts_prot; diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 01974c2510a8..a87e309e3b99 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -170,6 +170,8 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, bss_change |= BSS_CHANGED_BSSID; bss_change |= BSS_CHANGED_BEACON; bss_change |= BSS_CHANGED_BEACON_ENABLED; + bss_change |= BSS_CHANGED_IBSS; + sdata->vif.bss_conf.ibss_joined = true; ieee80211_bss_info_change_notify(sdata, bss_change); ieee80211_sta_def_wmm_params(sdata, sband->n_bitrates, supp_rates); @@ -950,7 +952,9 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) kfree(sdata->u.ibss.ie); skb = sdata->u.ibss.presp; rcu_assign_pointer(sdata->u.ibss.presp, NULL); - ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); + sdata->vif.bss_conf.ibss_joined = false; + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED | + BSS_CHANGED_IBSS); synchronize_rcu(); kfree_skb(skb); From d989ff7cf8d14f1b523f63ba0bf2ec1a9b7c25bc Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 28 Apr 2010 19:14:42 -0400 Subject: [PATCH 073/109] rtl8180: fix tx status reporting When reporting Tx status, indicate that only one rate was used. Otherwise, the rate is frozen at rate index 0 (i.e. 1Mb/s). Signed-off-by: John W. Linville Cc: stable@kernel.org --- drivers/net/wireless/rtl818x/rtl8180_dev.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c index c406cc85878b..4907fef011ad 100644 --- a/drivers/net/wireless/rtl818x/rtl8180_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c @@ -187,6 +187,7 @@ static void rtl8180_handle_tx(struct ieee80211_hw *dev, unsigned int prio) info->flags |= IEEE80211_TX_STAT_ACK; info->status.rates[0].count = (flags & 0xFF) + 1; + info->status.rates[1].idx = -1; ieee80211_tx_status_irqsafe(dev, skb); if (ring->entries - skb_queue_len(&ring->queue) == 2) From edfcba15bdfa520d8c64b496c9260a9d9e0b6d18 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 28 Apr 2010 16:12:57 -0400 Subject: [PATCH 074/109] libertas_tf: avoid warning about pr_fmt redefinition Also includes a minor cleanup regarding quotation of a standard kernel header file... Signed-off-by: John W. Linville --- drivers/net/wireless/libertas_tf/cmd.c | 3 ++- drivers/net/wireless/libertas_tf/deb_defs.h | 2 -- drivers/net/wireless/libertas_tf/if_usb.c | 3 ++- drivers/net/wireless/libertas_tf/libertas_tf.h | 2 ++ drivers/net/wireless/libertas_tf/main.c | 5 +++-- 5 files changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/libertas_tf/cmd.c b/drivers/net/wireless/libertas_tf/cmd.c index 22645e4028de..eb85019c1081 100644 --- a/drivers/net/wireless/libertas_tf/cmd.c +++ b/drivers/net/wireless/libertas_tf/cmd.c @@ -7,7 +7,8 @@ * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. */ -#include "deb_defs.h" +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "libertas_tf.h" static const struct channel_range channel_ranges[] = { diff --git a/drivers/net/wireless/libertas_tf/deb_defs.h b/drivers/net/wireless/libertas_tf/deb_defs.h index 9a3e92bec5fd..ae753962d8b5 100644 --- a/drivers/net/wireless/libertas_tf/deb_defs.h +++ b/drivers/net/wireless/libertas_tf/deb_defs.h @@ -9,8 +9,6 @@ #define DRV_NAME "libertas_tf" #endif -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - #include #ifdef CONFIG_LIBERTAS_THINFIRM_DEBUG diff --git a/drivers/net/wireless/libertas_tf/if_usb.c b/drivers/net/wireless/libertas_tf/if_usb.c index 919451a2ee4a..827b7dc306b0 100644 --- a/drivers/net/wireless/libertas_tf/if_usb.c +++ b/drivers/net/wireless/libertas_tf/if_usb.c @@ -9,7 +9,8 @@ */ #define DRV_NAME "lbtf_usb" -#include "deb_defs.h" +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include "libertas_tf.h" #include "if_usb.h" diff --git a/drivers/net/wireless/libertas_tf/libertas_tf.h b/drivers/net/wireless/libertas_tf/libertas_tf.h index 4cc42dd5a005..fbbaaae7a1ae 100644 --- a/drivers/net/wireless/libertas_tf/libertas_tf.h +++ b/drivers/net/wireless/libertas_tf/libertas_tf.h @@ -13,6 +13,8 @@ #include #include +#include "deb_defs.h" + #ifndef DRV_NAME #define DRV_NAME "libertas_tf" #endif diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c index a6b30d778f5c..895b557d664e 100644 --- a/drivers/net/wireless/libertas_tf/main.c +++ b/drivers/net/wireless/libertas_tf/main.c @@ -7,9 +7,10 @@ * the Free Software Foundation; either version 2 of the License, or (at * your option) any later version. */ -#include "deb_defs.h" +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include #include "libertas_tf.h" -#include "linux/etherdevice.h" #define DRIVER_RELEASE_VERSION "004.p0" /* thinfirm version: 5.132.X.pX */ From 49b5c7f473f1bbcb30275dcaee2c06dfb8ec2279 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 29 Apr 2010 21:34:01 +0200 Subject: [PATCH 075/109] mac80211: tell driver about IBSS merge My previous patch "mac80211: notify driver about IBSS status" left a problem -- when we merge with a new BSSID, we never tell the driver that we left the old one. Fix that. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ibss.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index a87e309e3b99..c585fced8584 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -91,6 +91,12 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, if (memcmp(ifibss->bssid, bssid, ETH_ALEN)) sta_info_flush(sdata->local, sdata); + /* if merging, indicate to driver that we leave the old IBSS */ + if (sdata->vif.bss_conf.ibss_joined) { + sdata->vif.bss_conf.ibss_joined = false; + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IBSS); + } + memcpy(ifibss->bssid, bssid, ETH_ALEN); sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0; From f5c044e53a6b319776c7140b22fee9be3bc1f758 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Fri, 30 Apr 2010 15:37:00 -0400 Subject: [PATCH 076/109] mac80211: remove deprecated noise field from ieee80211_rx_status Also remove associated IEEE80211_HW_NOISE_DBM from ieee80211_hw_flags. Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ar9170/main.c | 3 +-- drivers/net/wireless/ath/ath5k/base.c | 3 +-- drivers/net/wireless/b43/main.c | 3 +-- drivers/net/wireless/b43legacy/main.c | 3 +-- drivers/net/wireless/iwlwifi/iwl-agn.c | 1 - drivers/net/wireless/iwlwifi/iwl3945-base.c | 1 - drivers/net/wireless/mwl8k.c | 4 ++-- drivers/net/wireless/p54/main.c | 3 +-- drivers/net/wireless/wl12xx/wl1251_main.c | 1 - drivers/net/wireless/wl12xx/wl1271_main.c | 1 - include/net/mac80211.h | 8 +------- net/mac80211/rx.c | 2 -- 12 files changed, 8 insertions(+), 25 deletions(-) diff --git a/drivers/net/wireless/ath/ar9170/main.c b/drivers/net/wireless/ath/ar9170/main.c index cfc6a35a2c6a..dfcc055a827f 100644 --- a/drivers/net/wireless/ath/ar9170/main.c +++ b/drivers/net/wireless/ath/ar9170/main.c @@ -2550,8 +2550,7 @@ void *ar9170_alloc(size_t priv_size) BIT(NL80211_IFTYPE_ADHOC); ar->hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_NOISE_DBM; + IEEE80211_HW_SIGNAL_DBM; if (modparam_ht) { ar->hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION; diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 1f3e5b0986c7..feb7b9ea80ab 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -547,8 +547,7 @@ ath5k_pci_probe(struct pci_dev *pdev, SET_IEEE80211_DEV(hw, &pdev->dev); hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | - IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_NOISE_DBM; + IEEE80211_HW_SIGNAL_DBM; hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_AP) | diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 14cf3bd7ea51..e0575591828c 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4904,8 +4904,7 @@ static int b43_wireless_init(struct ssb_device *dev) /* fill hw info */ hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_NOISE_DBM; + IEEE80211_HW_SIGNAL_DBM; hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_AP) | diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 1d070be5a678..b2df432d3c63 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -3768,8 +3768,7 @@ static int b43legacy_wireless_init(struct ssb_device *dev) /* fill hw info */ hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_NOISE_DBM; + IEEE80211_HW_SIGNAL_DBM; hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_AP) | BIT(NL80211_IFTYPE_STATION) | diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index c22d3d8c440c..0cd338631592 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2653,7 +2653,6 @@ static int iwl_mac_setup_register(struct iwl_priv *priv) /* Tell mac80211 our characteristics */ hw->flags = IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_NOISE_DBM | IEEE80211_HW_AMPDU_AGGREGATION | IEEE80211_HW_SPECTRUM_MGMT; diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index e7263ed693c4..c9da39d7c414 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -3872,7 +3872,6 @@ static int iwl3945_setup_mac(struct iwl_priv *priv) /* Tell mac80211 our characteristics */ hw->flags = IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_NOISE_DBM | IEEE80211_HW_SPECTRUM_MGMT; if (!priv->cfg->broken_powersave) diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 9af6c9454605..a90bb6d2e26b 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -3981,8 +3981,8 @@ static int __devinit mwl8k_probe(struct pci_dev *pdev, hw->queues = MWL8K_TX_QUEUES; - /* Set rssi and noise values to dBm */ - hw->flags |= IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_NOISE_DBM; + /* Set rssi values to dBm */ + hw->flags |= IEEE80211_HW_SIGNAL_DBM; hw->vif_data_size = sizeof(struct mwl8k_vif); hw->sta_data_size = sizeof(struct mwl8k_sta); diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c index 36f4c820ad01..10a4b16f31ce 100644 --- a/drivers/net/wireless/p54/main.c +++ b/drivers/net/wireless/p54/main.c @@ -545,8 +545,7 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len) IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_BEACON_FILTER | - IEEE80211_HW_REPORTS_TX_ACK_STATUS | - IEEE80211_HW_NOISE_DBM; + IEEE80211_HW_REPORTS_TX_ACK_STATUS; dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC) | diff --git a/drivers/net/wireless/wl12xx/wl1251_main.c b/drivers/net/wireless/wl12xx/wl1251_main.c index 4d3be80c220e..b70621f63cda 100644 --- a/drivers/net/wireless/wl12xx/wl1251_main.c +++ b/drivers/net/wireless/wl12xx/wl1251_main.c @@ -1291,7 +1291,6 @@ int wl1251_init_ieee80211(struct wl1251 *wl) wl->hw->channel_change_time = 10000; wl->hw->flags = IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_NOISE_DBM | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_BEACON_FILTER | IEEE80211_HW_SUPPORTS_UAPSD; diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c index a794d5ed8c60..b0837255de6f 100644 --- a/drivers/net/wireless/wl12xx/wl1271_main.c +++ b/drivers/net/wireless/wl12xx/wl1271_main.c @@ -2275,7 +2275,6 @@ int wl1271_init_ieee80211(struct wl1271 *wl) wl->hw->max_listen_interval = wl->conf.conn.max_listen_interval; wl->hw->flags = IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_NOISE_DBM | IEEE80211_HW_BEACON_FILTER | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_UAPSD | diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 2879c8ef5571..00502b1a9e38 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -560,7 +560,6 @@ enum mac80211_rx_flags { * @signal: signal strength when receiving this frame, either in dBm, in dB or * unspecified depending on the hardware capabilities flags * @IEEE80211_HW_SIGNAL_* - * @noise: noise when receiving this frame, in dBm (DEPRECATED). * @antenna: antenna used * @rate_idx: index of data rate into band's supported rates or MCS index if * HT rates are use (RX_FLAG_HT) @@ -571,7 +570,6 @@ struct ieee80211_rx_status { enum ieee80211_band band; int freq; int signal; - int noise __deprecated; int antenna; int rate_idx; int flag; @@ -934,10 +932,6 @@ enum ieee80211_tkip_key_type { * one milliwatt. This is the preferred method since it is standardized * between different devices. @max_signal does not need to be set. * - * @IEEE80211_HW_NOISE_DBM: - * Hardware can provide noise (radio interference) values in units dBm, - * decibel difference from one milliwatt. - * * @IEEE80211_HW_SPECTRUM_MGMT: * Hardware supports spectrum management defined in 802.11h * Measurement, Channel Switch, Quieting, TPC @@ -1001,7 +995,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_2GHZ_SHORT_PREAMBLE_INCAPABLE = 1<<4, IEEE80211_HW_SIGNAL_UNSPEC = 1<<5, IEEE80211_HW_SIGNAL_DBM = 1<<6, - IEEE80211_HW_NOISE_DBM = 1<<7, + /* use this hole */ IEEE80211_HW_SPECTRUM_MGMT = 1<<8, IEEE80211_HW_AMPDU_AGGREGATION = 1<<9, IEEE80211_HW_SUPPORTS_PS = 1<<10, diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 8ee7db193269..e4f325f68fd3 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -80,8 +80,6 @@ ieee80211_rx_radiotap_len(struct ieee80211_local *local, len += 8; if (local->hw.flags & IEEE80211_HW_SIGNAL_DBM) len += 1; - if (local->hw.flags & IEEE80211_HW_NOISE_DBM) - len += 1; if (len & 1) /* padding for RX_FLAGS if necessary */ len++; From 96ff56419504ac6a610ff1af42330e0423242e16 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 30 Apr 2010 14:42:15 -0700 Subject: [PATCH 077/109] iwlwifi: work around passive scan issue Some firmware versions don't behave properly when passive scanning is requested on radar channels without enabling active scanning on receiving a good frame. Work around that issue by asking the firmware to only enable the active scanning after receiving a huge number of good frames, a number that can never be reached during our dwell time. Signed-off-by: Johannes Berg Signed-off-by: Reinette Chatre --- drivers/net/wireless/iwlwifi/iwl-commands.h | 4 +++- drivers/net/wireless/iwlwifi/iwl-scan.c | 23 ++++++++++++++++----- drivers/net/wireless/iwlwifi/iwl3945-base.c | 3 ++- 3 files changed, 23 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 6383d9f8c9b3..f4e59ae07f8e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -2621,7 +2621,9 @@ struct iwl_ssid_ie { #define PROBE_OPTION_MAX_3945 4 #define PROBE_OPTION_MAX 20 #define TX_CMD_LIFE_TIME_INFINITE cpu_to_le32(0xFFFFFFFF) -#define IWL_GOOD_CRC_TH cpu_to_le16(1) +#define IWL_GOOD_CRC_TH_DISABLED 0 +#define IWL_GOOD_CRC_TH_DEFAULT cpu_to_le16(1) +#define IWL_GOOD_CRC_TH_NEVER cpu_to_le16(0xffff) #define IWL_MAX_SCAN_SIZE 1024 #define IWL_MAX_CMD_SIZE 4096 #define IWL_MAX_PROBE_REQUEST 200 diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 5062f4ebb6a9..2367286eb74d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -812,16 +812,29 @@ static void iwl_bg_request_scan(struct work_struct *data) rate = IWL_RATE_1M_PLCP; rate_flags = RATE_MCS_CCK_MSK; } - scan->good_CRC_th = 0; + scan->good_CRC_th = IWL_GOOD_CRC_TH_DISABLED; } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) { band = IEEE80211_BAND_5GHZ; rate = IWL_RATE_6M_PLCP; /* - * If active scaning is requested but a certain channel - * is marked passive, we can do active scanning if we - * detect transmissions. + * If active scanning is requested but a certain channel is + * marked passive, we can do active scanning if we detect + * transmissions. + * + * There is an issue with some firmware versions that triggers + * a sysassert on a "good CRC threshold" of zero (== disabled), + * on a radar channel even though this means that we should NOT + * send probes. + * + * The "good CRC threshold" is the number of frames that we + * need to receive during our dwell time on a channel before + * sending out probes -- setting this to a huge value will + * mean we never reach it, but at the same time work around + * the aforementioned issue. Thus use IWL_GOOD_CRC_TH_NEVER + * here instead of IWL_GOOD_CRC_TH_DISABLED. */ - scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH : 0; + scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT : + IWL_GOOD_CRC_TH_NEVER; /* Force use of chains B and C (0x6) for scan Rx for 4965 * Avoid A (0x1) because of its off-channel reception on A-band. diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index e276f2a4e835..2f47d9332bfc 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -2966,7 +2966,8 @@ static void iwl3945_bg_request_scan(struct work_struct *data) * is marked passive, we can do active scanning if we * detect transmissions. */ - scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH : 0; + scan->good_CRC_th = is_active ? IWL_GOOD_CRC_TH_DEFAULT : + IWL_GOOD_CRC_TH_DISABLED; band = IEEE80211_BAND_5GHZ; } else { IWL_WARN(priv, "Invalid scan band count\n"); From 399dcb8a36edbde45bc27f5e33fd7f57de44bdd5 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Tue, 13 Apr 2010 11:28:52 -0700 Subject: [PATCH 078/109] iwlwifi: remove get_stats callback function The low level transmission function is performed at uCode layer for all the "agn" NICs, there is no statistics information available for mac80211 get_stats() call. Remove the callback function to avoid misleading information that returned success when indeed it is not supported. Now return "not supported". Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre --- drivers/net/wireless/iwlwifi/iwl-agn.c | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index c22d3d8c440c..04d84a68363d 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -3001,18 +3001,6 @@ static int iwl_mac_ampdu_action(struct ieee80211_hw *hw, return 0; } -static int iwl_mac_get_stats(struct ieee80211_hw *hw, - struct ieee80211_low_level_stats *stats) -{ - struct iwl_priv *priv = hw->priv; - - priv = hw->priv; - IWL_DEBUG_MAC80211(priv, "enter\n"); - IWL_DEBUG_MAC80211(priv, "leave\n"); - - return 0; -} - static void iwl_mac_sta_notify(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd cmd, @@ -3390,7 +3378,6 @@ static struct ieee80211_ops iwl_hw_ops = { .configure_filter = iwl_configure_filter, .set_key = iwl_mac_set_key, .update_tkip_key = iwl_mac_update_tkip_key, - .get_stats = iwl_mac_get_stats, .conf_tx = iwl_mac_conf_tx, .reset_tsf = iwl_mac_reset_tsf, .bss_info_changed = iwl_bss_info_changed, From f001b300493287a19ebd88fbca56978dabfec55a Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Tue, 13 Apr 2010 20:50:16 -0700 Subject: [PATCH 079/109] iwlwifi: remove outdated comments IEEE80211_CONF_SHORT_SLOT_TIME is no longer a possible setting in ieee80211_conf->flags Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre --- drivers/net/wireless/iwlwifi/iwl-core.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 457dc196ffdc..1cbc22a180a7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2116,10 +2116,6 @@ EXPORT_SYMBOL(iwl_mac_remove_interface); /** * iwl_mac_config - mac80211 config callback - * - * We ignore conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME since it seems to - * be set inappropriately and the driver currently sets the hardware up to - * use it whenever needed. */ int iwl_mac_config(struct ieee80211_hw *hw, u32 changed) { From cd398c313785cb5f2b8cb2c85e865f06419b1730 Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Wed, 14 Apr 2010 10:27:00 -0700 Subject: [PATCH 080/109] iwlwifi: reset pci retry timeout We removed resetting of PCI_RETRY_TIMEOUT register in merge of suspend resume work. 'Suspend and resume' resets the PCI configuration space, so we have to disable the RETRY_TIMEOUT register again here. Signed-off-by: Abhijeet Kolekar Signed-off-by: Reinette Chatre --- drivers/net/wireless/iwlwifi/iwl-core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 1cbc22a180a7..1e11706dcf63 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2930,6 +2930,12 @@ int iwl_pci_resume(struct pci_dev *pdev) struct iwl_priv *priv = pci_get_drvdata(pdev); int ret; + /* + * We disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state. + */ + pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00); + pci_set_power_state(pdev, PCI_D0); ret = pci_enable_device(pdev); if (ret) From c2845d010b0e58a17cd2301e657b614962331550 Mon Sep 17 00:00:00 2001 From: Shanyu Zhao Date: Wed, 14 Apr 2010 15:35:14 -0700 Subject: [PATCH 081/109] iwlwifi: set correct AC to swq_id for aggregation When starting an aggregation session, the swq_id is generated in function iwl_virtual_agg_queue_num() where the first parameter is supposed to be the Access Class, but it used the tx fifo ID instead. This means the AC value stored in swq_id is incorrect. To test this, look at the tx_queue file in debugfs while transmitting Best Effort flow (ac=2), it shows: hwq 10: read=0 write=0 stop=0 swq_id=0xa9 (ac 1/hwq 10) After this fix, it will show: hwq 10: read=0 write=0 stop=0 swq_id=0xaa (ac 2/hwq 10) Signed-off-by: Shanyu Zhao Signed-off-by: Reinette Chatre --- drivers/net/wireless/iwlwifi/iwl-agn-tx.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c index 11661fa28f21..95e263f1d117 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c @@ -83,6 +83,15 @@ static inline int get_fifo_from_ac(u8 ac) return ac_to_fifo[ac]; } +static inline int get_ac_from_tid(u16 tid) +{ + if (likely(tid < ARRAY_SIZE(tid_to_ac))) + return tid_to_ac[tid]; + + /* no support for TIDs 8-15 yet */ + return -EINVAL; +} + static inline int get_fifo_from_tid(u16 tid) { if (likely(tid < ARRAY_SIZE(tid_to_ac))) @@ -991,7 +1000,7 @@ int iwlagn_tx_agg_start(struct iwl_priv *priv, const u8 *ra, u16 tid, u16 *ssn) tid_data = &priv->stations[sta_id].tid[tid]; *ssn = SEQ_TO_SN(tid_data->seq_number); tid_data->agg.txq_id = txq_id; - priv->txq[txq_id].swq_id = iwl_virtual_agg_queue_num(tx_fifo, txq_id); + priv->txq[txq_id].swq_id = iwl_virtual_agg_queue_num(get_ac_from_tid(tid), txq_id); spin_unlock_irqrestore(&priv->sta_lock, flags); ret = priv->cfg->ops->lib->txq_agg_enable(priv, txq_id, tx_fifo, From 17f36fc6ef3d1ab15f9d2160a9daa107db0887ca Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Fri, 16 Apr 2010 10:03:54 -0700 Subject: [PATCH 082/109] iwl3945: add ucode statistics Add general, rx and tx uCode statistics to 3945. This will help in debugging Signed-off-by: Abhijeet Kolekar Signed-off-by: Reinette Chatre --- drivers/net/wireless/iwlwifi/Makefile | 1 + .../net/wireless/iwlwifi/iwl-3945-debugfs.c | 500 ++++++++++++++++++ .../net/wireless/iwlwifi/iwl-3945-debugfs.h | 60 +++ drivers/net/wireless/iwlwifi/iwl-3945.c | 72 ++- drivers/net/wireless/iwlwifi/iwl-3945.h | 2 + drivers/net/wireless/iwlwifi/iwl-debugfs.c | 18 +- drivers/net/wireless/iwlwifi/iwl-dev.h | 5 + drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +- 8 files changed, 646 insertions(+), 14 deletions(-) create mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c create mode 100644 drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h diff --git a/drivers/net/wireless/iwlwifi/Makefile b/drivers/net/wireless/iwlwifi/Makefile index 5ed2dcbe6d01..7c7235385513 100644 --- a/drivers/net/wireless/iwlwifi/Makefile +++ b/drivers/net/wireless/iwlwifi/Makefile @@ -22,5 +22,6 @@ iwlagn-$(CONFIG_IWL5000) += iwl-1000.o # 3945 obj-$(CONFIG_IWL3945) += iwl3945.o iwl3945-objs := iwl3945-base.o iwl-3945.o iwl-3945-rs.o iwl-3945-led.o +iwl3945-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-3945-debugfs.o ccflags-y += -D__CHECK_ENDIAN__ diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c new file mode 100644 index 000000000000..6a9c64a50e36 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.c @@ -0,0 +1,500 @@ +/****************************************************************************** + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + *****************************************************************************/ + +#include "iwl-3945-debugfs.h" + +ssize_t iwl3945_ucode_rx_stats_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + int pos = 0; + char *buf; + int bufsz = sizeof(struct iwl39_statistics_rx_phy) * 40 + + sizeof(struct iwl39_statistics_rx_non_phy) * 40 + 400; + ssize_t ret; + struct iwl39_statistics_rx_phy *ofdm, *accum_ofdm, *delta_ofdm, *max_ofdm; + struct iwl39_statistics_rx_phy *cck, *accum_cck, *delta_cck, *max_cck; + struct iwl39_statistics_rx_non_phy *general, *accum_general; + struct iwl39_statistics_rx_non_phy *delta_general, *max_general; + + if (!iwl_is_alive(priv)) + return -EAGAIN; + + buf = kzalloc(bufsz, GFP_KERNEL); + if (!buf) { + IWL_ERR(priv, "Can not allocate Buffer\n"); + return -ENOMEM; + } + + /* + * The statistic information display here is based on + * the last statistics notification from uCode + * might not reflect the current uCode activity + */ + ofdm = &priv->_3945.statistics.rx.ofdm; + cck = &priv->_3945.statistics.rx.cck; + general = &priv->_3945.statistics.rx.general; + accum_ofdm = &priv->_3945.accum_statistics.rx.ofdm; + accum_cck = &priv->_3945.accum_statistics.rx.cck; + accum_general = &priv->_3945.accum_statistics.rx.general; + delta_ofdm = &priv->_3945.delta_statistics.rx.ofdm; + delta_cck = &priv->_3945.delta_statistics.rx.cck; + delta_general = &priv->_3945.delta_statistics.rx.general; + max_ofdm = &priv->_3945.max_delta.rx.ofdm; + max_cck = &priv->_3945.max_delta.rx.cck; + max_general = &priv->_3945.max_delta.rx.general; + + pos += iwl_dbgfs_statistics_flag(priv, buf, bufsz); + pos += scnprintf(buf + pos, bufsz - pos, "%-32s current" + "acumulative delta max\n", + "Statistics_Rx - OFDM:"); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "ina_cnt:", le32_to_cpu(ofdm->ina_cnt), + accum_ofdm->ina_cnt, + delta_ofdm->ina_cnt, max_ofdm->ina_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "fina_cnt:", + le32_to_cpu(ofdm->fina_cnt), accum_ofdm->fina_cnt, + delta_ofdm->fina_cnt, max_ofdm->fina_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", "plcp_err:", + le32_to_cpu(ofdm->plcp_err), accum_ofdm->plcp_err, + delta_ofdm->plcp_err, max_ofdm->plcp_err); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", "crc32_err:", + le32_to_cpu(ofdm->crc32_err), accum_ofdm->crc32_err, + delta_ofdm->crc32_err, max_ofdm->crc32_err); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", "overrun_err:", + le32_to_cpu(ofdm->overrun_err), + accum_ofdm->overrun_err, delta_ofdm->overrun_err, + max_ofdm->overrun_err); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "early_overrun_err:", + le32_to_cpu(ofdm->early_overrun_err), + accum_ofdm->early_overrun_err, + delta_ofdm->early_overrun_err, + max_ofdm->early_overrun_err); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "crc32_good:", le32_to_cpu(ofdm->crc32_good), + accum_ofdm->crc32_good, delta_ofdm->crc32_good, + max_ofdm->crc32_good); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", "false_alarm_cnt:", + le32_to_cpu(ofdm->false_alarm_cnt), + accum_ofdm->false_alarm_cnt, + delta_ofdm->false_alarm_cnt, + max_ofdm->false_alarm_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "fina_sync_err_cnt:", + le32_to_cpu(ofdm->fina_sync_err_cnt), + accum_ofdm->fina_sync_err_cnt, + delta_ofdm->fina_sync_err_cnt, + max_ofdm->fina_sync_err_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "sfd_timeout:", + le32_to_cpu(ofdm->sfd_timeout), + accum_ofdm->sfd_timeout, + delta_ofdm->sfd_timeout, + max_ofdm->sfd_timeout); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "fina_timeout:", + le32_to_cpu(ofdm->fina_timeout), + accum_ofdm->fina_timeout, + delta_ofdm->fina_timeout, + max_ofdm->fina_timeout); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "unresponded_rts:", + le32_to_cpu(ofdm->unresponded_rts), + accum_ofdm->unresponded_rts, + delta_ofdm->unresponded_rts, + max_ofdm->unresponded_rts); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "rxe_frame_lmt_ovrun:", + le32_to_cpu(ofdm->rxe_frame_limit_overrun), + accum_ofdm->rxe_frame_limit_overrun, + delta_ofdm->rxe_frame_limit_overrun, + max_ofdm->rxe_frame_limit_overrun); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "sent_ack_cnt:", + le32_to_cpu(ofdm->sent_ack_cnt), + accum_ofdm->sent_ack_cnt, + delta_ofdm->sent_ack_cnt, + max_ofdm->sent_ack_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "sent_cts_cnt:", + le32_to_cpu(ofdm->sent_cts_cnt), + accum_ofdm->sent_cts_cnt, + delta_ofdm->sent_cts_cnt, max_ofdm->sent_cts_cnt); + + pos += scnprintf(buf + pos, bufsz - pos, "%-32s current" + "acumulative delta max\n", + "Statistics_Rx - CCK:"); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "ina_cnt:", + le32_to_cpu(cck->ina_cnt), accum_cck->ina_cnt, + delta_cck->ina_cnt, max_cck->ina_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "fina_cnt:", + le32_to_cpu(cck->fina_cnt), accum_cck->fina_cnt, + delta_cck->fina_cnt, max_cck->fina_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "plcp_err:", + le32_to_cpu(cck->plcp_err), accum_cck->plcp_err, + delta_cck->plcp_err, max_cck->plcp_err); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "crc32_err:", + le32_to_cpu(cck->crc32_err), accum_cck->crc32_err, + delta_cck->crc32_err, max_cck->crc32_err); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "overrun_err:", + le32_to_cpu(cck->overrun_err), + accum_cck->overrun_err, + delta_cck->overrun_err, max_cck->overrun_err); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "early_overrun_err:", + le32_to_cpu(cck->early_overrun_err), + accum_cck->early_overrun_err, + delta_cck->early_overrun_err, + max_cck->early_overrun_err); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "crc32_good:", + le32_to_cpu(cck->crc32_good), accum_cck->crc32_good, + delta_cck->crc32_good, + max_cck->crc32_good); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "false_alarm_cnt:", + le32_to_cpu(cck->false_alarm_cnt), + accum_cck->false_alarm_cnt, + delta_cck->false_alarm_cnt, max_cck->false_alarm_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "fina_sync_err_cnt:", + le32_to_cpu(cck->fina_sync_err_cnt), + accum_cck->fina_sync_err_cnt, + delta_cck->fina_sync_err_cnt, + max_cck->fina_sync_err_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "sfd_timeout:", + le32_to_cpu(cck->sfd_timeout), + accum_cck->sfd_timeout, + delta_cck->sfd_timeout, max_cck->sfd_timeout); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "fina_timeout:", + le32_to_cpu(cck->fina_timeout), + accum_cck->fina_timeout, + delta_cck->fina_timeout, max_cck->fina_timeout); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "unresponded_rts:", + le32_to_cpu(cck->unresponded_rts), + accum_cck->unresponded_rts, + delta_cck->unresponded_rts, + max_cck->unresponded_rts); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "rxe_frame_lmt_ovrun:", + le32_to_cpu(cck->rxe_frame_limit_overrun), + accum_cck->rxe_frame_limit_overrun, + delta_cck->rxe_frame_limit_overrun, + max_cck->rxe_frame_limit_overrun); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "sent_ack_cnt:", + le32_to_cpu(cck->sent_ack_cnt), + accum_cck->sent_ack_cnt, + delta_cck->sent_ack_cnt, + max_cck->sent_ack_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "sent_cts_cnt:", + le32_to_cpu(cck->sent_cts_cnt), + accum_cck->sent_cts_cnt, + delta_cck->sent_cts_cnt, + max_cck->sent_cts_cnt); + + pos += scnprintf(buf + pos, bufsz - pos, "%-32s current" + "acumulative delta max\n", + "Statistics_Rx - GENERAL:"); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "bogus_cts:", + le32_to_cpu(general->bogus_cts), + accum_general->bogus_cts, + delta_general->bogus_cts, max_general->bogus_cts); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "bogus_ack:", + le32_to_cpu(general->bogus_ack), + accum_general->bogus_ack, + delta_general->bogus_ack, max_general->bogus_ack); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "non_bssid_frames:", + le32_to_cpu(general->non_bssid_frames), + accum_general->non_bssid_frames, + delta_general->non_bssid_frames, + max_general->non_bssid_frames); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "filtered_frames:", + le32_to_cpu(general->filtered_frames), + accum_general->filtered_frames, + delta_general->filtered_frames, + max_general->filtered_frames); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "non_channel_beacons:", + le32_to_cpu(general->non_channel_beacons), + accum_general->non_channel_beacons, + delta_general->non_channel_beacons, + max_general->non_channel_beacons); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); + kfree(buf); + return ret; +} + +ssize_t iwl3945_ucode_tx_stats_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + int pos = 0; + char *buf; + int bufsz = (sizeof(struct iwl39_statistics_tx) * 48) + 250; + ssize_t ret; + struct iwl39_statistics_tx *tx, *accum_tx, *delta_tx, *max_tx; + + if (!iwl_is_alive(priv)) + return -EAGAIN; + + buf = kzalloc(bufsz, GFP_KERNEL); + if (!buf) { + IWL_ERR(priv, "Can not allocate Buffer\n"); + return -ENOMEM; + } + + /* + * The statistic information display here is based on + * the last statistics notification from uCode + * might not reflect the current uCode activity + */ + tx = &priv->_3945.statistics.tx; + accum_tx = &priv->_3945.accum_statistics.tx; + delta_tx = &priv->_3945.delta_statistics.tx; + max_tx = &priv->_3945.max_delta.tx; + pos += iwl_dbgfs_statistics_flag(priv, buf, bufsz); + pos += scnprintf(buf + pos, bufsz - pos, "%-32s current" + "acumulative delta max\n", + "Statistics_Tx:"); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "preamble:", + le32_to_cpu(tx->preamble_cnt), + accum_tx->preamble_cnt, + delta_tx->preamble_cnt, max_tx->preamble_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "rx_detected_cnt:", + le32_to_cpu(tx->rx_detected_cnt), + accum_tx->rx_detected_cnt, + delta_tx->rx_detected_cnt, max_tx->rx_detected_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "bt_prio_defer_cnt:", + le32_to_cpu(tx->bt_prio_defer_cnt), + accum_tx->bt_prio_defer_cnt, + delta_tx->bt_prio_defer_cnt, + max_tx->bt_prio_defer_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "bt_prio_kill_cnt:", + le32_to_cpu(tx->bt_prio_kill_cnt), + accum_tx->bt_prio_kill_cnt, + delta_tx->bt_prio_kill_cnt, + max_tx->bt_prio_kill_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "few_bytes_cnt:", + le32_to_cpu(tx->few_bytes_cnt), + accum_tx->few_bytes_cnt, + delta_tx->few_bytes_cnt, max_tx->few_bytes_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "cts_timeout:", + le32_to_cpu(tx->cts_timeout), accum_tx->cts_timeout, + delta_tx->cts_timeout, max_tx->cts_timeout); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "ack_timeout:", + le32_to_cpu(tx->ack_timeout), + accum_tx->ack_timeout, + delta_tx->ack_timeout, max_tx->ack_timeout); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "expected_ack_cnt:", + le32_to_cpu(tx->expected_ack_cnt), + accum_tx->expected_ack_cnt, + delta_tx->expected_ack_cnt, + max_tx->expected_ack_cnt); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "actual_ack_cnt:", + le32_to_cpu(tx->actual_ack_cnt), + accum_tx->actual_ack_cnt, + delta_tx->actual_ack_cnt, + max_tx->actual_ack_cnt); + + ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); + kfree(buf); + return ret; +} + +ssize_t iwl3945_ucode_general_stats_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct iwl_priv *priv = file->private_data; + int pos = 0; + char *buf; + int bufsz = sizeof(struct iwl39_statistics_general) * 10 + 300; + ssize_t ret; + struct iwl39_statistics_general *general, *accum_general; + struct iwl39_statistics_general *delta_general, *max_general; + struct statistics_dbg *dbg, *accum_dbg, *delta_dbg, *max_dbg; + struct iwl39_statistics_div *div, *accum_div, *delta_div, *max_div; + + if (!iwl_is_alive(priv)) + return -EAGAIN; + + buf = kzalloc(bufsz, GFP_KERNEL); + if (!buf) { + IWL_ERR(priv, "Can not allocate Buffer\n"); + return -ENOMEM; + } + + /* + * The statistic information display here is based on + * the last statistics notification from uCode + * might not reflect the current uCode activity + */ + general = &priv->_3945.statistics.general; + dbg = &priv->_3945.statistics.general.dbg; + div = &priv->_3945.statistics.general.div; + accum_general = &priv->_3945.accum_statistics.general; + delta_general = &priv->_3945.delta_statistics.general; + max_general = &priv->_3945.max_delta.general; + accum_dbg = &priv->_3945.accum_statistics.general.dbg; + delta_dbg = &priv->_3945.delta_statistics.general.dbg; + max_dbg = &priv->_3945.max_delta.general.dbg; + accum_div = &priv->_3945.accum_statistics.general.div; + delta_div = &priv->_3945.delta_statistics.general.div; + max_div = &priv->_3945.max_delta.general.div; + pos += iwl_dbgfs_statistics_flag(priv, buf, bufsz); + pos += scnprintf(buf + pos, bufsz - pos, "%-32s current" + "acumulative delta max\n", + "Statistics_General:"); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "burst_check:", + le32_to_cpu(dbg->burst_check), + accum_dbg->burst_check, + delta_dbg->burst_check, max_dbg->burst_check); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "burst_count:", + le32_to_cpu(dbg->burst_count), + accum_dbg->burst_count, + delta_dbg->burst_count, max_dbg->burst_count); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "sleep_time:", + le32_to_cpu(general->sleep_time), + accum_general->sleep_time, + delta_general->sleep_time, max_general->sleep_time); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "slots_out:", + le32_to_cpu(general->slots_out), + accum_general->slots_out, + delta_general->slots_out, max_general->slots_out); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "slots_idle:", + le32_to_cpu(general->slots_idle), + accum_general->slots_idle, + delta_general->slots_idle, max_general->slots_idle); + pos += scnprintf(buf + pos, bufsz - pos, "ttl_timestamp:\t\t\t%u\n", + le32_to_cpu(general->ttl_timestamp)); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "tx_on_a:", + le32_to_cpu(div->tx_on_a), accum_div->tx_on_a, + delta_div->tx_on_a, max_div->tx_on_a); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "tx_on_b:", + le32_to_cpu(div->tx_on_b), accum_div->tx_on_b, + delta_div->tx_on_b, max_div->tx_on_b); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "exec_time:", + le32_to_cpu(div->exec_time), accum_div->exec_time, + delta_div->exec_time, max_div->exec_time); + pos += scnprintf(buf + pos, bufsz - pos, + " %-30s %10u %10u %10u %10u\n", + "probe_time:", + le32_to_cpu(div->probe_time), accum_div->probe_time, + delta_div->probe_time, max_div->probe_time); + ret = simple_read_from_buffer(user_buf, count, ppos, buf, pos); + kfree(buf); + return ret; +} diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h b/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h new file mode 100644 index 000000000000..70809c53c215 --- /dev/null +++ b/drivers/net/wireless/iwlwifi/iwl-3945-debugfs.h @@ -0,0 +1,60 @@ +/****************************************************************************** + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2010 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, + * USA + * + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * Contact Information: + * Intel Linux Wireless + * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + *****************************************************************************/ + +#include "iwl-dev.h" +#include "iwl-core.h" +#include "iwl-debug.h" + +#ifdef CONFIG_IWLWIFI_DEBUGFS +ssize_t iwl3945_ucode_rx_stats_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos); +ssize_t iwl3945_ucode_tx_stats_read(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos); +ssize_t iwl3945_ucode_general_stats_read(struct file *file, + char __user *user_buf, size_t count, + loff_t *ppos); +#else +static ssize_t iwl3945_ucode_rx_stats_read(struct file *file, + char __user *user_buf, size_t count, + loff_t *ppos) +{ + return 0; +} +static ssize_t iwl3945_ucode_tx_stats_read(struct file *file, + char __user *user_buf, size_t count, + loff_t *ppos) +{ + return 0; +} +static ssize_t iwl3945_ucode_general_stats_read(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + return 0; +} +#endif diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index d10e59def53e..9dad8672d700 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -49,6 +49,7 @@ #include "iwl-helpers.h" #include "iwl-led.h" #include "iwl-3945-led.h" +#include "iwl-3945-debugfs.h" #define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \ [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ @@ -292,7 +293,7 @@ static void iwl3945_tx_queue_reclaim(struct iwl_priv *priv, * iwl3945_rx_reply_tx - Handle Tx response */ static void iwl3945_rx_reply_tx(struct iwl_priv *priv, - struct iwl_rx_mem_buffer *rxb) + struct iwl_rx_mem_buffer *rxb) { struct iwl_rx_packet *pkt = rxb_addr(rxb); u16 sequence = le16_to_cpu(pkt->hdr.sequence); @@ -350,18 +351,81 @@ static void iwl3945_rx_reply_tx(struct iwl_priv *priv, * RX handler implementations * *****************************************************************************/ +#ifdef CONFIG_IWLWIFI_DEBUG +/* + * based on the assumption of all statistics counter are in DWORD + * FIXME: This function is for debugging, do not deal with + * the case of counters roll-over. + */ +static void iwl3945_accumulative_statistics(struct iwl_priv *priv, + __le32 *stats) +{ + int i; + __le32 *prev_stats; + u32 *accum_stats; + u32 *delta, *max_delta; + + prev_stats = (__le32 *)&priv->_3945.statistics; + accum_stats = (u32 *)&priv->_3945.accum_statistics; + delta = (u32 *)&priv->_3945.delta_statistics; + max_delta = (u32 *)&priv->_3945.max_delta; + + for (i = sizeof(__le32); i < sizeof(struct iwl3945_notif_statistics); + i += sizeof(__le32), stats++, prev_stats++, delta++, + max_delta++, accum_stats++) { + if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) { + *delta = (le32_to_cpu(*stats) - + le32_to_cpu(*prev_stats)); + *accum_stats += *delta; + if (*delta > *max_delta) + *max_delta = *delta; + } + } + + /* reset accumulative statistics for "no-counter" type statistics */ + priv->_3945.accum_statistics.general.temperature = + priv->_3945.statistics.general.temperature; + priv->_3945.accum_statistics.general.ttl_timestamp = + priv->_3945.statistics.general.ttl_timestamp; +} +#endif void iwl3945_hw_rx_statistics(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) { struct iwl_rx_packet *pkt = rxb_addr(rxb); + IWL_DEBUG_RX(priv, "Statistics notification received (%d vs %d).\n", (int)sizeof(struct iwl3945_notif_statistics), le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK); +#ifdef CONFIG_IWLWIFI_DEBUG + iwl3945_accumulative_statistics(priv, (__le32 *)&pkt->u.raw); +#endif memcpy(&priv->_3945.statistics, pkt->u.raw, sizeof(priv->_3945.statistics)); } +void iwl3945_reply_statistics(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb) +{ + struct iwl_rx_packet *pkt = rxb_addr(rxb); + __le32 *flag = (__le32 *)&pkt->u.raw; + + if (le32_to_cpu(*flag) & UCODE_STATISTICS_CLEAR_MSK) { +#ifdef CONFIG_IWLWIFI_DEBUG + memset(&priv->_3945.accum_statistics, 0, + sizeof(struct iwl3945_notif_statistics)); + memset(&priv->_3945.delta_statistics, 0, + sizeof(struct iwl3945_notif_statistics)); + memset(&priv->_3945.max_delta, 0, + sizeof(struct iwl3945_notif_statistics)); +#endif + IWL_DEBUG_RX(priv, "Statistics have been cleared\n"); + } + iwl3945_hw_rx_statistics(priv, rxb); +} + + /****************************************************************************** * * Misc. internal state and helper functions @@ -2735,6 +2799,12 @@ static struct iwl_lib_ops iwl3945_lib = { .isr = iwl_isr_legacy, .config_ap = iwl3945_config_ap, .add_bcast_station = iwl3945_add_bcast_station, + + .debugfs_ops = { + .rx_stats_read = iwl3945_ucode_rx_stats_read, + .tx_stats_read = iwl3945_ucode_tx_stats_read, + .general_stats_read = iwl3945_ucode_general_stats_read, + }, }; static struct iwl_hcmd_utils_ops iwl3945_hcmd_utils = { diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.h b/drivers/net/wireless/iwlwifi/iwl-3945.h index e9674f0a1e94..643adb644bb8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.h +++ b/drivers/net/wireless/iwlwifi/iwl-3945.h @@ -264,6 +264,8 @@ extern int iwl3945_hw_reg_send_txpower(struct iwl_priv *priv); extern int iwl3945_hw_reg_set_txpower(struct iwl_priv *priv, s8 power); extern void iwl3945_hw_rx_statistics(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb); +void iwl3945_reply_statistics(struct iwl_priv *priv, + struct iwl_rx_mem_buffer *rxb); extern void iwl3945_disable_events(struct iwl_priv *priv); extern int iwl4965_get_temperature(const struct iwl_priv *priv); extern void iwl3945_post_associate(struct iwl_priv *priv); diff --git a/drivers/net/wireless/iwlwifi/iwl-debugfs.c b/drivers/net/wireless/iwlwifi/iwl-debugfs.c index d789f8db4481..0aedbec9cbc8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-debugfs.c +++ b/drivers/net/wireless/iwlwifi/iwl-debugfs.c @@ -1053,10 +1053,8 @@ static ssize_t iwl_dbgfs_ucode_rx_stats_read(struct file *file, size_t count, loff_t *ppos) { struct iwl_priv *priv = file->private_data; - if (priv->cfg->ops->lib->debugfs_ops.rx_stats_read) - return priv->cfg->ops->lib->debugfs_ops.rx_stats_read(file, - user_buf, count, ppos); - return 0; + return priv->cfg->ops->lib->debugfs_ops.rx_stats_read(file, + user_buf, count, ppos); } static ssize_t iwl_dbgfs_ucode_tx_stats_read(struct file *file, @@ -1064,10 +1062,8 @@ static ssize_t iwl_dbgfs_ucode_tx_stats_read(struct file *file, size_t count, loff_t *ppos) { struct iwl_priv *priv = file->private_data; - if (priv->cfg->ops->lib->debugfs_ops.tx_stats_read) - return priv->cfg->ops->lib->debugfs_ops.tx_stats_read(file, - user_buf, count, ppos); - return 0; + return priv->cfg->ops->lib->debugfs_ops.tx_stats_read(file, + user_buf, count, ppos); } static ssize_t iwl_dbgfs_ucode_general_stats_read(struct file *file, @@ -1075,10 +1071,8 @@ static ssize_t iwl_dbgfs_ucode_general_stats_read(struct file *file, size_t count, loff_t *ppos) { struct iwl_priv *priv = file->private_data; - if (priv->cfg->ops->lib->debugfs_ops.general_stats_read) - return priv->cfg->ops->lib->debugfs_ops.general_stats_read(file, - user_buf, count, ppos); - return 0; + return priv->cfg->ops->lib->debugfs_ops.general_stats_read(file, + user_buf, count, ppos); } static ssize_t iwl_dbgfs_sensitivity_read(struct file *file, diff --git a/drivers/net/wireless/iwlwifi/iwl-dev.h b/drivers/net/wireless/iwlwifi/iwl-dev.h index bdc60aae75ec..58c69a5798d4 100644 --- a/drivers/net/wireless/iwlwifi/iwl-dev.h +++ b/drivers/net/wireless/iwlwifi/iwl-dev.h @@ -1202,6 +1202,11 @@ struct iwl_priv { struct delayed_work rfkill_poll; struct iwl3945_notif_statistics statistics; +#ifdef CONFIG_IWLWIFI_DEBUG + struct iwl3945_notif_statistics accum_statistics; + struct iwl3945_notif_statistics delta_statistics; + struct iwl3945_notif_statistics max_delta; +#endif u32 sta_supp_rates; int last_rx_rssi; /* From Rx packet statistics */ diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 789480b89a6e..98055fb5caf0 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -956,7 +956,7 @@ static void iwl3945_setup_rx_handlers(struct iwl_priv *priv) * statistics request from the host as well as for the periodic * statistics notifications (after received beacons) from the uCode. */ - priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl3945_hw_rx_statistics; + priv->rx_handlers[REPLY_STATISTICS_CMD] = iwl3945_reply_statistics; priv->rx_handlers[STATISTICS_NOTIFICATION] = iwl3945_hw_rx_statistics; iwl_setup_rx_scan_handlers(priv); From e3a3cd8789e1daf1b5af70d3252cab50cd3824c9 Mon Sep 17 00:00:00 2001 From: Daniel Halperin Date: Sun, 18 Apr 2010 09:27:58 -0700 Subject: [PATCH 083/109] iwlwifi: set AMPDU status variables correctly The TX status code is currently abusing the ampdu_ack_map field (a bitmap) to count the number of successfully received frames. The comments in mac80211.h show there are actually three different, relevant variables, of which we are currently using two, both incorrectly. Fix this by making - ampdu_ack_len -> the number of ACKed frames (i.e. successes) - ampdu_ack_map -> the bitmap - ampdu_len -> the total number of frames sent (i.e., attempts) to match the header file (and verified with ath9k's usage) and updating Intel's RS code to match. Signed-off-by: Daniel Halperin Signed-off-by: Reinette Chatre --- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 10 +++++----- drivers/net/wireless/iwlwifi/iwl-agn-tx.c | 5 +++-- 2 files changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index 8f8d5e3e688d..f01f242659c3 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -867,14 +867,14 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband, rs_get_tbl_info_from_mcs(tx_rate, priv->band, &tbl_type, &rs_index); rs_collect_tx_data(curr_tbl, rs_index, - info->status.ampdu_ack_len, - info->status.ampdu_ack_map); + info->status.ampdu_len, + info->status.ampdu_ack_len); /* Update success/fail counts if not searching for new mode */ if (lq_sta->stay_in_tbl) { - lq_sta->total_success += info->status.ampdu_ack_map; - lq_sta->total_failed += (info->status.ampdu_ack_len - - info->status.ampdu_ack_map); + lq_sta->total_success += info->status.ampdu_ack_len; + lq_sta->total_failed += (info->status.ampdu_len - + info->status.ampdu_ack_len); } } else { /* diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c index 95e263f1d117..c2a5c85542bf 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-tx.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-tx.c @@ -1233,8 +1233,9 @@ static int iwlagn_tx_status_reply_compressed_ba(struct iwl_priv *priv, memset(&info->status, 0, sizeof(info->status)); info->flags |= IEEE80211_TX_STAT_ACK; info->flags |= IEEE80211_TX_STAT_AMPDU; - info->status.ampdu_ack_map = successes; - info->status.ampdu_ack_len = agg->frame_count; + info->status.ampdu_ack_len = successes; + info->status.ampdu_ack_map = bitmap; + info->status.ampdu_len = agg->frame_count; iwlagn_hwrate_to_tx_control(priv, agg->rate_n_flags, info); IWL_DEBUG_TX_REPLY(priv, "Bitmap %llx\n", (unsigned long long)bitmap); From e517736ab85fcaa4ceebbb572f3e86838097ad0a Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Mon, 19 Apr 2010 18:49:40 -0700 Subject: [PATCH 084/109] iwlwifi: set hw parameters based on device type Separate the hw_set_hw_params() function to per device based; different devices can have different hardware parameters set, when separate the function based on device type can avoid mistakes, give more flexibilities and easier to read. Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre --- drivers/net/wireless/iwlwifi/iwl-5000.c | 71 ++++++++++++++++++------- drivers/net/wireless/iwlwifi/iwl-6000.c | 68 ++++++++++++++++------- 2 files changed, 101 insertions(+), 38 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index e43493685271..115d3ea1142f 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -200,26 +200,57 @@ static int iwl5000_hw_set_hw_params(struct iwl_priv *priv) /* Set initial sensitivity parameters */ /* Set initial calibration set */ - switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) { - case CSR_HW_REV_TYPE_5150: - priv->hw_params.sens = &iwl5150_sensitivity; - priv->hw_params.calib_init_cfg = - BIT(IWL_CALIB_DC) | - BIT(IWL_CALIB_LO) | - BIT(IWL_CALIB_TX_IQ) | - BIT(IWL_CALIB_BASE_BAND); + priv->hw_params.sens = &iwl5000_sensitivity; + priv->hw_params.calib_init_cfg = + BIT(IWL_CALIB_XTAL) | + BIT(IWL_CALIB_LO) | + BIT(IWL_CALIB_TX_IQ) | + BIT(IWL_CALIB_TX_IQ_PERD) | + BIT(IWL_CALIB_BASE_BAND); - break; - default: - priv->hw_params.sens = &iwl5000_sensitivity; - priv->hw_params.calib_init_cfg = - BIT(IWL_CALIB_XTAL) | - BIT(IWL_CALIB_LO) | - BIT(IWL_CALIB_TX_IQ) | - BIT(IWL_CALIB_TX_IQ_PERD) | - BIT(IWL_CALIB_BASE_BAND); - break; - } + return 0; +} + +static int iwl5150_hw_set_hw_params(struct iwl_priv *priv) +{ + if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES && + priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES) + priv->cfg->num_of_queues = + priv->cfg->mod_params->num_of_queues; + + priv->hw_params.max_txq_num = priv->cfg->num_of_queues; + priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM; + priv->hw_params.scd_bc_tbls_size = + priv->cfg->num_of_queues * + sizeof(struct iwlagn_scd_bc_tbl); + priv->hw_params.tfd_size = sizeof(struct iwl_tfd); + priv->hw_params.max_stations = IWL5000_STATION_COUNT; + priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID; + + priv->hw_params.max_data_size = IWLAGN_RTC_DATA_SIZE; + priv->hw_params.max_inst_size = IWLAGN_RTC_INST_SIZE; + + priv->hw_params.max_bsm_size = 0; + priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) | + BIT(IEEE80211_BAND_5GHZ); + priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR; + + priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant); + priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant); + priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant; + priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant; + + if (priv->cfg->ops->lib->temp_ops.set_ct_kill) + priv->cfg->ops->lib->temp_ops.set_ct_kill(priv); + + /* Set initial sensitivity parameters */ + /* Set initial calibration set */ + priv->hw_params.sens = &iwl5150_sensitivity; + priv->hw_params.calib_init_cfg = + BIT(IWL_CALIB_DC) | + BIT(IWL_CALIB_LO) | + BIT(IWL_CALIB_TX_IQ) | + BIT(IWL_CALIB_BASE_BAND); return 0; } @@ -332,7 +363,7 @@ static struct iwl_lib_ops iwl5000_lib = { }; static struct iwl_lib_ops iwl5150_lib = { - .set_hw_params = iwl5000_hw_set_hw_params, + .set_hw_params = iwl5150_hw_set_hw_params, .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl, .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl, .txq_set_sched = iwlagn_txq_set_sched, diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 7da23d3ff7b6..c4926506a084 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -176,24 +176,56 @@ static int iwl6000_hw_set_hw_params(struct iwl_priv *priv) /* Set initial sensitivity parameters */ /* Set initial calibration set */ priv->hw_params.sens = &iwl6000_sensitivity; - switch (priv->hw_rev & CSR_HW_REV_TYPE_MSK) { - case CSR_HW_REV_TYPE_6x50: - priv->hw_params.calib_init_cfg = - BIT(IWL_CALIB_XTAL) | - BIT(IWL_CALIB_DC) | - BIT(IWL_CALIB_LO) | - BIT(IWL_CALIB_TX_IQ) | - BIT(IWL_CALIB_BASE_BAND); + priv->hw_params.calib_init_cfg = + BIT(IWL_CALIB_XTAL) | + BIT(IWL_CALIB_LO) | + BIT(IWL_CALIB_TX_IQ) | + BIT(IWL_CALIB_BASE_BAND); - break; - default: - priv->hw_params.calib_init_cfg = - BIT(IWL_CALIB_XTAL) | - BIT(IWL_CALIB_LO) | - BIT(IWL_CALIB_TX_IQ) | - BIT(IWL_CALIB_BASE_BAND); - break; - } + return 0; +} + +static int iwl6050_hw_set_hw_params(struct iwl_priv *priv) +{ + if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES && + priv->cfg->mod_params->num_of_queues <= IWLAGN_NUM_QUEUES) + priv->cfg->num_of_queues = + priv->cfg->mod_params->num_of_queues; + + priv->hw_params.max_txq_num = priv->cfg->num_of_queues; + priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM; + priv->hw_params.scd_bc_tbls_size = + priv->cfg->num_of_queues * + sizeof(struct iwlagn_scd_bc_tbl); + priv->hw_params.tfd_size = sizeof(struct iwl_tfd); + priv->hw_params.max_stations = IWL5000_STATION_COUNT; + priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID; + + priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE; + priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE; + + priv->hw_params.max_bsm_size = 0; + priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) | + BIT(IEEE80211_BAND_5GHZ); + priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR; + + priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant); + priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant); + priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant; + priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant; + + if (priv->cfg->ops->lib->temp_ops.set_ct_kill) + priv->cfg->ops->lib->temp_ops.set_ct_kill(priv); + + /* Set initial sensitivity parameters */ + /* Set initial calibration set */ + priv->hw_params.sens = &iwl6000_sensitivity; + priv->hw_params.calib_init_cfg = + BIT(IWL_CALIB_XTAL) | + BIT(IWL_CALIB_DC) | + BIT(IWL_CALIB_LO) | + BIT(IWL_CALIB_TX_IQ) | + BIT(IWL_CALIB_BASE_BAND); return 0; } @@ -304,7 +336,7 @@ static const struct iwl_ops iwl6000_ops = { }; static struct iwl_lib_ops iwl6050_lib = { - .set_hw_params = iwl6000_hw_set_hw_params, + .set_hw_params = iwl6050_hw_set_hw_params, .txq_update_byte_cnt_tbl = iwlagn_txq_update_byte_cnt_tbl, .txq_inval_byte_cnt_tbl = iwlagn_txq_inval_byte_cnt_tbl, .txq_set_sched = iwlagn_txq_set_sched, From f8478df1eab2f11aefc4b6668c5867949ab96bd7 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Mon, 19 Apr 2010 20:39:48 -0700 Subject: [PATCH 085/109] iwlwifi: greenfield support only true for 11n devices Greenfield is a 11n feature, remove it from non-11n devices configuration parameters list Signed-off-by: Wey-Yi Guy Signed-off-by: Reinette Chatre --- drivers/net/wireless/iwlwifi/iwl-1000.c | 1 - drivers/net/wireless/iwlwifi/iwl-6000.c | 3 --- 2 files changed, 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index 8431ffce37d3..fb59af2d41c6 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -282,7 +282,6 @@ struct iwl_cfg iwl1000_bg_cfg = { .use_bsm = false, .max_ll_items = OTP_MAX_LL_ITEMS_1000, .shadow_ram_support = false, - .ht_greenfield_support = true, .led_compensation = 51, .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .support_ct_kill_exit = true, diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index c4926506a084..7acef703253a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -500,7 +500,6 @@ struct iwl_cfg iwl6000i_2abg_cfg = { .pa_type = IWL_PA_INTERNAL, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, - .ht_greenfield_support = true, .led_compensation = 51, .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, @@ -533,7 +532,6 @@ struct iwl_cfg iwl6000i_2bg_cfg = { .pa_type = IWL_PA_INTERNAL, .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, - .ht_greenfield_support = true, .led_compensation = 51, .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, @@ -600,7 +598,6 @@ struct iwl_cfg iwl6050_2abg_cfg = { .pa_type = IWL_PA_SYSTEM, .max_ll_items = OTP_MAX_LL_ITEMS_6x50, .shadow_ram_support = true, - .ht_greenfield_support = true, .led_compensation = 51, .chain_noise_num_beacons = IWL_CAL_NUM_BEACONS, .supports_idle = true, From 1f55c12cef6d369d76ae13d522edd1c07e667788 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 3 May 2010 14:46:05 -0400 Subject: [PATCH 086/109] iwmc3200wifi: cleanup unneeded debugfs error handling "iwl: cleanup: remove unneeded error handling" missed the one in if_sdio_debugfs_init(). I don't think we even need to check -ENODEV ourselves because if DEBUG_FS is not compiled in, all the debugfs utility functions will become no-op. Reported-by: Dan Carpenter Signed-off-by: Zhu Yi Acked-by: Dan Carpenter Signed-off-by: John W. Linville --- drivers/net/wireless/iwmc3200wifi/bus.h | 2 +- drivers/net/wireless/iwmc3200wifi/debug.h | 4 +- drivers/net/wireless/iwmc3200wifi/debugfs.c | 47 +++++---------------- drivers/net/wireless/iwmc3200wifi/sdio.c | 17 +------- 4 files changed, 15 insertions(+), 55 deletions(-) diff --git a/drivers/net/wireless/iwmc3200wifi/bus.h b/drivers/net/wireless/iwmc3200wifi/bus.h index 836663eec257..62edd5888a7b 100644 --- a/drivers/net/wireless/iwmc3200wifi/bus.h +++ b/drivers/net/wireless/iwmc3200wifi/bus.h @@ -31,7 +31,7 @@ struct iwm_if_ops { int (*disable)(struct iwm_priv *iwm); int (*send_chunk)(struct iwm_priv *iwm, u8* buf, int count); - int (*debugfs_init)(struct iwm_priv *iwm, struct dentry *parent_dir); + void (*debugfs_init)(struct iwm_priv *iwm, struct dentry *parent_dir); void (*debugfs_exit)(struct iwm_priv *iwm); const char *umac_name; diff --git a/drivers/net/wireless/iwmc3200wifi/debug.h b/drivers/net/wireless/iwmc3200wifi/debug.h index e35c9b693d1f..f98bf125a8ae 100644 --- a/drivers/net/wireless/iwmc3200wifi/debug.h +++ b/drivers/net/wireless/iwmc3200wifi/debug.h @@ -113,10 +113,10 @@ struct iwm_debugfs { }; #ifdef CONFIG_IWM_DEBUG -int iwm_debugfs_init(struct iwm_priv *iwm); +void iwm_debugfs_init(struct iwm_priv *iwm); void iwm_debugfs_exit(struct iwm_priv *iwm); #else -static inline int iwm_debugfs_init(struct iwm_priv *iwm) +static inline void iwm_debugfs_init(struct iwm_priv *iwm) { return 0; } diff --git a/drivers/net/wireless/iwmc3200wifi/debugfs.c b/drivers/net/wireless/iwmc3200wifi/debugfs.c index c916152bb936..b42165c40288 100644 --- a/drivers/net/wireless/iwmc3200wifi/debugfs.c +++ b/drivers/net/wireless/iwmc3200wifi/debugfs.c @@ -47,12 +47,11 @@ static struct { #define add_dbg_module(dbg, name, id, initlevel) \ do { \ - struct dentry *d; \ dbg.dbg_module[id] = (initlevel); \ - d = debugfs_create_x8(name, 0600, dbg.dbgdir, \ - &(dbg.dbg_module[id])); \ - if (!IS_ERR(d)) \ - dbg.dbg_module_dentries[id] = d; \ + dbg.dbg_module_dentries[id] = \ + debugfs_create_x8(name, 0600, \ + dbg.dbgdir, \ + &(dbg.dbg_module[id])); \ } while (0) static int iwm_debugfs_u32_read(void *data, u64 *val) @@ -422,37 +421,19 @@ static const struct file_operations iwm_debugfs_fw_err_fops = { .read = iwm_debugfs_fw_err_read, }; -int iwm_debugfs_init(struct iwm_priv *iwm) +void iwm_debugfs_init(struct iwm_priv *iwm) { - int i, result; - char devdir[16]; + int i; iwm->dbg.rootdir = debugfs_create_dir(KBUILD_MODNAME, NULL); - result = PTR_ERR(iwm->dbg.rootdir); - if (!result || IS_ERR(iwm->dbg.rootdir)) { - if (result == -ENODEV) { - IWM_ERR(iwm, "DebugFS (CONFIG_DEBUG_FS) not " - "enabled in kernel config\n"); - result = 0; /* No debugfs support */ - } - IWM_ERR(iwm, "Couldn't create rootdir: %d\n", result); - goto error; - } - - snprintf(devdir, sizeof(devdir), "%s", wiphy_name(iwm_to_wiphy(iwm))); - - iwm->dbg.devdir = debugfs_create_dir(devdir, iwm->dbg.rootdir); + iwm->dbg.devdir = debugfs_create_dir(wiphy_name(iwm_to_wiphy(iwm)), + iwm->dbg.rootdir); iwm->dbg.dbgdir = debugfs_create_dir("debug", iwm->dbg.devdir); iwm->dbg.rxdir = debugfs_create_dir("rx", iwm->dbg.devdir); iwm->dbg.txdir = debugfs_create_dir("tx", iwm->dbg.devdir); iwm->dbg.busdir = debugfs_create_dir("bus", iwm->dbg.devdir); - if (iwm->bus_ops->debugfs_init) { - result = iwm->bus_ops->debugfs_init(iwm, iwm->dbg.busdir); - if (result < 0) { - IWM_ERR(iwm, "Couldn't create bus entry: %d\n", result); - goto error; - } - } + if (iwm->bus_ops->debugfs_init) + iwm->bus_ops->debugfs_init(iwm, iwm->dbg.busdir); iwm->dbg.dbg_level = IWM_DL_NONE; iwm->dbg.dbg_level_dentry = @@ -471,23 +452,15 @@ int iwm_debugfs_init(struct iwm_priv *iwm) iwm->dbg.txq_dentry = debugfs_create_file("queues", 0200, iwm->dbg.txdir, iwm, &iwm_debugfs_txq_fops); - iwm->dbg.tx_credit_dentry = debugfs_create_file("credits", 0200, iwm->dbg.txdir, iwm, &iwm_debugfs_tx_credit_fops); - iwm->dbg.rx_ticket_dentry = debugfs_create_file("tickets", 0200, iwm->dbg.rxdir, iwm, &iwm_debugfs_rx_ticket_fops); - iwm->dbg.fw_err_dentry = debugfs_create_file("last_fw_err", 0200, iwm->dbg.dbgdir, iwm, &iwm_debugfs_fw_err_fops); - - return 0; - - error: - return result; } void iwm_debugfs_exit(struct iwm_priv *iwm) diff --git a/drivers/net/wireless/iwmc3200wifi/sdio.c b/drivers/net/wireless/iwmc3200wifi/sdio.c index a7ec7eac9137..b55f4b7446bc 100644 --- a/drivers/net/wireless/iwmc3200wifi/sdio.c +++ b/drivers/net/wireless/iwmc3200wifi/sdio.c @@ -365,21 +365,13 @@ static const struct file_operations iwm_debugfs_sdio_fops = { .read = iwm_debugfs_sdio_read, }; -static int if_sdio_debugfs_init(struct iwm_priv *iwm, struct dentry *parent_dir) +static void if_sdio_debugfs_init(struct iwm_priv *iwm, struct dentry *parent_dir) { - int result; struct iwm_sdio_priv *hw = iwm_to_if_sdio(iwm); hw->cccr_dentry = debugfs_create_file("cccr", 0200, parent_dir, iwm, &iwm_debugfs_sdio_fops); - result = PTR_ERR(hw->cccr_dentry); - if (IS_ERR(hw->cccr_dentry) && (result != -ENODEV)) { - IWM_ERR(iwm, "Couldn't create CCCR entry: %d\n", result); - return result; - } - - return 0; } static void if_sdio_debugfs_exit(struct iwm_priv *iwm) @@ -439,11 +431,7 @@ static int iwm_sdio_probe(struct sdio_func *func, hw = iwm_private(iwm); hw->iwm = iwm; - ret = iwm_debugfs_init(iwm); - if (ret < 0) { - IWM_ERR(iwm, "Debugfs registration failed\n"); - goto if_free; - } + iwm_debugfs_init(iwm); sdio_set_drvdata(func, hw); @@ -472,7 +460,6 @@ static int iwm_sdio_probe(struct sdio_func *func, destroy_workqueue(hw->isr_wq); debugfs_exit: iwm_debugfs_exit(iwm); - if_free: iwm_if_free(iwm); return ret; } From 91639c76bfd9d27ac54a3c521a2559d02f409ebe Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Wed, 28 Apr 2010 17:00:52 -0400 Subject: [PATCH 087/109] rt2x00: remove now unused noise field from struct rxdone_entry_desc Signed-off-by: John W. Linville Acked-by: Gertjan van Wingerde --- drivers/net/wireless/rt2x00/rt2800pci.c | 4 ---- drivers/net/wireless/rt2x00/rt2800usb.c | 4 ---- drivers/net/wireless/rt2x00/rt2x00queue.h | 2 -- 3 files changed, 10 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 0e52f174896c..89281d78f04d 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -895,10 +895,6 @@ static void rt2800pci_fill_rxdone(struct queue_entry *entry, (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) + rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2; - rxdesc->noise = - (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) + - rt2x00_get_field32(rxwi3, RXWI_W3_SNR1)) / 2; - rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT); /* diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index a71615606c37..6f2a945cd45c 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -645,10 +645,6 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, (rt2x00_get_field32(rxwi2, RXWI_W2_RSSI0) + rt2x00_get_field32(rxwi2, RXWI_W2_RSSI1)) / 2; - rxdesc->noise = - (rt2x00_get_field32(rxwi3, RXWI_W3_SNR0) + - rt2x00_get_field32(rxwi3, RXWI_W3_SNR1)) / 2; - rxdesc->size = rt2x00_get_field32(rxwi0, RXWI_W0_MPDU_TOTAL_BYTE_COUNT); /* diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index c1e482bb37b3..f519aba4ff0f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -183,7 +183,6 @@ enum rxdone_entry_desc_flags { * @timestamp: RX Timestamp * @signal: Signal of the received frame. * @rssi: RSSI of the received frame. - * @noise: Measured noise during frame reception. * @size: Data size of the received frame. * @flags: MAC80211 receive flags (See &enum mac80211_rx_flags). * @dev_flags: Ralink receive flags (See &enum rxdone_entry_desc_flags). @@ -197,7 +196,6 @@ struct rxdone_entry_desc { u64 timestamp; int signal; int rssi; - int noise; int size; int flags; int dev_flags; From 354b4f04f2aa9d9652ecd5a4cdace784c7cfcca8 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 29 Apr 2010 15:56:06 -0400 Subject: [PATCH 088/109] b43: Added get_survey callback in order to get channel noise Signed-off-by: John W. Linville --- drivers/net/wireless/b43/main.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index e0575591828c..f6019828ed3f 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4570,6 +4570,23 @@ static void b43_op_sw_scan_complete_notifier(struct ieee80211_hw *hw) mutex_unlock(&wl->mutex); } +static int b43_op_get_survey(struct ieee80211_hw *hw, int idx, + struct survey_info *survey) +{ + struct b43_wl *wl = hw_to_b43_wl(hw); + struct b43_wldev *dev = wl->current_dev; + struct ieee80211_conf *conf = &hw->conf; + + if (idx != 0) + return -ENOENT; + + survey->channel = conf->channel; + survey->filled = SURVEY_INFO_NOISE_DBM; + survey->noise = dev->stats.link_noise; + + return 0; +} + static const struct ieee80211_ops b43_hw_ops = { .tx = b43_op_tx, .conf_tx = b43_op_conf_tx, @@ -4589,6 +4606,7 @@ static const struct ieee80211_ops b43_hw_ops = { .sta_notify = b43_op_sta_notify, .sw_scan_start = b43_op_sw_scan_start_notifier, .sw_scan_complete = b43_op_sw_scan_complete_notifier, + .get_survey = b43_op_get_survey, .rfkill_poll = b43_rfkill_poll, }; From c7ab1a4dcb8fb63364e9460b1182da6eae5f0d16 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Thu, 29 Apr 2010 15:56:25 -0400 Subject: [PATCH 089/109] b43legacy: Added get_survey callback in order to get channel noise Signed-off-by: John W. Linville --- drivers/net/wireless/b43legacy/main.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index b2df432d3c63..9304dc0f2f66 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -3481,6 +3481,23 @@ static int b43legacy_op_beacon_set_tim(struct ieee80211_hw *hw, return 0; } +static int b43legacy_op_get_survey(struct ieee80211_hw *hw, int idx, + struct survey_info *survey) +{ + struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); + struct b43legacy_wldev *dev = wl->current_dev; + struct ieee80211_conf *conf = &hw->conf; + + if (idx != 0) + return -ENOENT; + + survey->channel = conf->channel; + survey->filled = SURVEY_INFO_NOISE_DBM; + survey->noise = dev->stats.link_noise; + + return 0; +} + static const struct ieee80211_ops b43legacy_hw_ops = { .tx = b43legacy_op_tx, .conf_tx = b43legacy_op_conf_tx, @@ -3493,6 +3510,7 @@ static const struct ieee80211_ops b43legacy_hw_ops = { .start = b43legacy_op_start, .stop = b43legacy_op_stop, .set_tim = b43legacy_op_beacon_set_tim, + .get_survey = b43legacy_op_get_survey, .rfkill_poll = b43legacy_rfkill_poll, }; From f7c65594f7148b778f41d591a701e94bb22428e4 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 30 Apr 2010 13:48:36 +0200 Subject: [PATCH 090/109] mac80211: fix ieee80211_find_sta[_by_hw] Both of these functions can currently return a station pointer that, to the driver, is invalid (in IBSS mode only) because adding the station failed. Check for that, and also make ieee80211_find_sta() properly use the per interface station search. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/sta_info.c | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-) diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 3de7a2260d65..730197591ab5 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -855,8 +855,12 @@ struct ieee80211_sta *ieee80211_find_sta_by_hw(struct ieee80211_hw *hw, struct sta_info *sta, *nxt; /* Just return a random station ... first in list ... */ - for_each_sta_info(hw_to_local(hw), addr, sta, nxt) + for_each_sta_info(hw_to_local(hw), addr, sta, nxt) { + if (!sta->uploaded) + return NULL; return &sta->sta; + } + return NULL; } EXPORT_SYMBOL_GPL(ieee80211_find_sta_by_hw); @@ -864,14 +868,19 @@ EXPORT_SYMBOL_GPL(ieee80211_find_sta_by_hw); struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif, const u8 *addr) { - struct ieee80211_sub_if_data *sdata; + struct sta_info *sta; if (!vif) return NULL; - sdata = vif_to_sdata(vif); + sta = sta_info_get_bss(vif_to_sdata(vif), addr); + if (!sta) + return NULL; - return ieee80211_find_sta_by_hw(&sdata->local->hw, addr); + if (!sta->uploaded) + return NULL; + + return &sta->sta; } EXPORT_SYMBOL(ieee80211_find_sta); From b42f2074dedef559ecf72dce61a6501f9f9b273a Mon Sep 17 00:00:00 2001 From: David Kilroy Date: Sat, 1 May 2010 14:05:38 +0100 Subject: [PATCH 091/109] orinoco: add hermes_ops Pave the way for introducing USB alternative functions. Force callers to dereference ops instead of providing wrappers. Signed-off-by: David Kilroy Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/airport.c | 2 +- drivers/net/wireless/orinoco/cfg.c | 2 +- drivers/net/wireless/orinoco/fw.c | 2 +- drivers/net/wireless/orinoco/hermes.c | 52 +++++++------- drivers/net/wireless/orinoco/hermes.h | 50 ++++++++------ drivers/net/wireless/orinoco/hermes_dld.c | 34 +++++----- drivers/net/wireless/orinoco/hw.c | 63 ++++++++--------- drivers/net/wireless/orinoco/main.c | 83 ++++++++++++----------- drivers/net/wireless/orinoco/wext.c | 6 +- 9 files changed, 154 insertions(+), 140 deletions(-) diff --git a/drivers/net/wireless/orinoco/airport.c b/drivers/net/wireless/orinoco/airport.c index c60df2c1aca3..ea23c4fdbf62 100644 --- a/drivers/net/wireless/orinoco/airport.c +++ b/drivers/net/wireless/orinoco/airport.c @@ -195,7 +195,7 @@ airport_attach(struct macio_dev *mdev, const struct of_device_id *match) ssleep(1); /* Reset it before we get the interrupt */ - hermes_init(hw); + hw->ops->init(hw); if (request_irq(card->irq, orinoco_interrupt, 0, DRIVER_NAME, priv)) { printk(KERN_ERR PFX "Couldn't get IRQ %d\n", card->irq); diff --git a/drivers/net/wireless/orinoco/cfg.c b/drivers/net/wireless/orinoco/cfg.c index 90dd4d0595c3..81d228de9e5d 100644 --- a/drivers/net/wireless/orinoco/cfg.c +++ b/drivers/net/wireless/orinoco/cfg.c @@ -189,7 +189,7 @@ static int orinoco_set_channel(struct wiphy *wiphy, if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { /* Fast channel change - no commit if successful */ hermes_t *hw = &priv->hw; - err = hermes_docmd_wait(hw, HERMES_CMD_TEST | + err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | HERMES_TEST_SET_CHANNEL, channel, NULL); } diff --git a/drivers/net/wireless/orinoco/fw.c b/drivers/net/wireless/orinoco/fw.c index cfa72962052b..07c79e5de32d 100644 --- a/drivers/net/wireless/orinoco/fw.c +++ b/drivers/net/wireless/orinoco/fw.c @@ -259,7 +259,7 @@ symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw, } /* Reset hermes chip and make sure it responds */ - ret = hermes_init(hw); + ret = hw->ops->init(hw); /* hermes_reset() should return 0 with the secondary firmware */ if (secondary && ret != 0) diff --git a/drivers/net/wireless/orinoco/hermes.c b/drivers/net/wireless/orinoco/hermes.c index 1a2fca76fd3c..a7df5240779c 100644 --- a/drivers/net/wireless/orinoco/hermes.c +++ b/drivers/net/wireless/orinoco/hermes.c @@ -70,6 +70,7 @@ #endif /* ! HERMES_DEBUG */ +static const struct hermes_ops hermes_ops_local; /* * Internal functions @@ -111,9 +112,9 @@ static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0, */ /* For doing cmds that wipe the magic constant in SWSUPPORT0 */ -int hermes_doicmd_wait(hermes_t *hw, u16 cmd, - u16 parm0, u16 parm1, u16 parm2, - struct hermes_response *resp) +static int hermes_doicmd_wait(hermes_t *hw, u16 cmd, + u16 parm0, u16 parm1, u16 parm2, + struct hermes_response *resp) { int err = 0; int k; @@ -163,17 +164,17 @@ int hermes_doicmd_wait(hermes_t *hw, u16 cmd, out: return err; } -EXPORT_SYMBOL(hermes_doicmd_wait); void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing) { hw->iobase = address; hw->reg_spacing = reg_spacing; hw->inten = 0x0; + hw->ops = &hermes_ops_local; } EXPORT_SYMBOL(hermes_struct_init); -int hermes_init(hermes_t *hw) +static int hermes_init(hermes_t *hw) { u16 reg; int err = 0; @@ -217,7 +218,6 @@ int hermes_init(hermes_t *hw) return err; } -EXPORT_SYMBOL(hermes_init); /* Issue a command to the chip, and (busy!) wait for it to * complete. @@ -228,8 +228,8 @@ EXPORT_SYMBOL(hermes_init); * > 0 on error returned by the firmware * * Callable from any context, but locking is your problem. */ -int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, - struct hermes_response *resp) +static int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, + struct hermes_response *resp) { int err; int k; @@ -291,9 +291,8 @@ int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, out: return err; } -EXPORT_SYMBOL(hermes_docmd_wait); -int hermes_allocate(hermes_t *hw, u16 size, u16 *fid) +static int hermes_allocate(hermes_t *hw, u16 size, u16 *fid) { int err = 0; int k; @@ -333,7 +332,6 @@ int hermes_allocate(hermes_t *hw, u16 size, u16 *fid) return 0; } -EXPORT_SYMBOL(hermes_allocate); /* Set up a BAP to read a particular chunk of data from card's internal buffer. * @@ -403,8 +401,8 @@ static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset) * 0 on success * > 0 on error from firmware */ -int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, - u16 id, u16 offset) +static int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, + u16 id, u16 offset) { int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; int err = 0; @@ -422,7 +420,6 @@ int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, out: return err; } -EXPORT_SYMBOL(hermes_bap_pread); /* Write a block of data to the chip's buffer, via the * BAP. Synchronization/serialization is the caller's problem. @@ -432,8 +429,8 @@ EXPORT_SYMBOL(hermes_bap_pread); * 0 on success * > 0 on error from firmware */ -int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, - u16 id, u16 offset) +static int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, + u16 id, u16 offset) { int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; int err = 0; @@ -451,7 +448,6 @@ int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, out: return err; } -EXPORT_SYMBOL(hermes_bap_pwrite); /* Read a Length-Type-Value record from the card. * @@ -461,8 +457,8 @@ EXPORT_SYMBOL(hermes_bap_pwrite); * practice. * * Callable from user or bh context. */ -int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, - u16 *length, void *buf) +static int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, + u16 *length, void *buf) { int err = 0; int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; @@ -505,10 +501,9 @@ int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize, return 0; } -EXPORT_SYMBOL(hermes_read_ltv); -int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, - u16 length, const void *value) +static int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, + u16 length, const void *value) { int dreg = bap ? HERMES_DATA1 : HERMES_DATA0; int err = 0; @@ -533,4 +528,15 @@ int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, return err; } -EXPORT_SYMBOL(hermes_write_ltv); + +/* Hermes operations for local buses */ +static const struct hermes_ops hermes_ops_local = { + .init = hermes_init, + .cmd_wait = hermes_docmd_wait, + .init_cmd_wait = hermes_doicmd_wait, + .allocate = hermes_allocate, + .read_ltv = hermes_read_ltv, + .write_ltv = hermes_write_ltv, + .bap_pread = hermes_bap_pread, + .bap_pwrite = hermes_bap_pwrite +}; diff --git a/drivers/net/wireless/orinoco/hermes.h b/drivers/net/wireless/orinoco/hermes.h index 2dddbb597c4d..18b268c54dfe 100644 --- a/drivers/net/wireless/orinoco/hermes.h +++ b/drivers/net/wireless/orinoco/hermes.h @@ -374,6 +374,27 @@ struct hermes_multicast { /* Timeouts */ #define HERMES_BAP_BUSY_TIMEOUT (10000) /* In iterations of ~1us */ +struct hermes; + +/* Functions to access hardware */ +struct hermes_ops { + int (*init)(struct hermes *hw); + int (*cmd_wait)(struct hermes *hw, u16 cmd, u16 parm0, + struct hermes_response *resp); + int (*init_cmd_wait)(struct hermes *hw, u16 cmd, + u16 parm0, u16 parm1, u16 parm2, + struct hermes_response *resp); + int (*allocate)(struct hermes *hw, u16 size, u16 *fid); + int (*read_ltv)(struct hermes *hw, int bap, u16 rid, unsigned buflen, + u16 *length, void *buf); + int (*write_ltv)(struct hermes *hw, int bap, u16 rid, + u16 length, const void *value); + int (*bap_pread)(struct hermes *hw, int bap, void *buf, int len, + u16 id, u16 offset); + int (*bap_pwrite)(struct hermes *hw, int bap, const void *buf, + int len, u16 id, u16 offset); +}; + /* Basic control structure */ typedef struct hermes { void __iomem *iobase; @@ -381,6 +402,7 @@ typedef struct hermes { #define HERMES_16BIT_REGSPACING 0 #define HERMES_32BIT_REGSPACING 1 u16 inten; /* Which interrupts should be enabled? */ + const struct hermes_ops *ops; } hermes_t; /* Register access convenience macros */ @@ -394,22 +416,6 @@ typedef struct hermes { /* Function prototypes */ void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing); -int hermes_init(hermes_t *hw); -int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, - struct hermes_response *resp); -int hermes_doicmd_wait(hermes_t *hw, u16 cmd, - u16 parm0, u16 parm1, u16 parm2, - struct hermes_response *resp); -int hermes_allocate(hermes_t *hw, u16 size, u16 *fid); - -int hermes_bap_pread(hermes_t *hw, int bap, void *buf, int len, - u16 id, u16 offset); -int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, int len, - u16 id, u16 offset); -int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen, - u16 *length, void *buf); -int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, - u16 length, const void *value); /* Inline functions */ @@ -426,13 +432,13 @@ static inline void hermes_set_irqmask(hermes_t *hw, u16 events) static inline int hermes_enable_port(hermes_t *hw, int port) { - return hermes_docmd_wait(hw, HERMES_CMD_ENABLE | (port << 8), + return hw->ops->cmd_wait(hw, HERMES_CMD_ENABLE | (port << 8), 0, NULL); } static inline int hermes_disable_port(hermes_t *hw, int port) { - return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8), + return hw->ops->cmd_wait(hw, HERMES_CMD_DISABLE | (port << 8), 0, NULL); } @@ -440,7 +446,7 @@ static inline int hermes_disable_port(hermes_t *hw, int port) * information frame in __orinoco_ev_info() */ static inline int hermes_inquire(hermes_t *hw, u16 rid) { - return hermes_docmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL); + return hw->ops->cmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL); } #define HERMES_BYTES_TO_RECLEN(n) ((((n)+1)/2) + 1) @@ -475,10 +481,10 @@ static inline void hermes_clear_words(struct hermes *hw, int off, } #define HERMES_READ_RECORD(hw, bap, rid, buf) \ - (hermes_read_ltv((hw), (bap), (rid), sizeof(*buf), NULL, (buf))) + (hw->ops->read_ltv((hw), (bap), (rid), sizeof(*buf), NULL, (buf))) #define HERMES_WRITE_RECORD(hw, bap, rid, buf) \ - (hermes_write_ltv((hw), (bap), (rid), \ - HERMES_BYTES_TO_RECLEN(sizeof(*buf)), (buf))) + (hw->ops->write_ltv((hw), (bap), (rid), \ + HERMES_BYTES_TO_RECLEN(sizeof(*buf)), (buf))) static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word) { diff --git a/drivers/net/wireless/orinoco/hermes_dld.c b/drivers/net/wireless/orinoco/hermes_dld.c index fb157eb889ca..8f22e2026a82 100644 --- a/drivers/net/wireless/orinoco/hermes_dld.c +++ b/drivers/net/wireless/orinoco/hermes_dld.c @@ -293,7 +293,7 @@ int hermes_read_pda(hermes_t *hw, /* PDA of spectrum symbol is in eeprom */ /* Issue command to read EEPROM */ - ret = hermes_docmd_wait(hw, HERMES_CMD_READMIF, 0, NULL); + ret = hw->ops->cmd_wait(hw, HERMES_CMD_READMIF, 0, NULL); if (ret) return ret; } else { @@ -408,16 +408,16 @@ int hermesi_program_init(hermes_t *hw, u32 offset) /* Acknowledge any outstanding command */ hermes_write_regn(hw, EVACK, 0xFFFF); - /* Using doicmd_wait rather than docmd_wait */ - err = hermes_doicmd_wait(hw, - 0x0100 | HERMES_CMD_INIT, - 0, 0, 0, NULL); + /* Using init_cmd_wait rather than cmd_wait */ + err = hw->ops->init_cmd_wait(hw, + 0x0100 | HERMES_CMD_INIT, + 0, 0, 0, NULL); if (err) return err; - err = hermes_doicmd_wait(hw, - 0x0000 | HERMES_CMD_INIT, - 0, 0, 0, NULL); + err = hw->ops->init_cmd_wait(hw, + 0x0000 | HERMES_CMD_INIT, + 0, 0, 0, NULL); if (err) return err; @@ -428,12 +428,12 @@ int hermesi_program_init(hermes_t *hw, u32 offset) return err; pr_debug(PFX "Enabling volatile, EP 0x%08x\n", offset); - err = hermes_doicmd_wait(hw, - HERMES_PROGRAM_ENABLE_VOLATILE, - offset & 0xFFFFu, - offset >> 16, - 0, - NULL); + err = hw->ops->init_cmd_wait(hw, + HERMES_PROGRAM_ENABLE_VOLATILE, + offset & 0xFFFFu, + offset >> 16, + 0, + NULL); pr_debug(PFX "PROGRAM_ENABLE returned %d\n", err); return err; @@ -451,7 +451,7 @@ int hermesi_program_end(hermes_t *hw) int rc = 0; int err; - rc = hermes_docmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp); + rc = hw->ops->cmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp); pr_debug(PFX "PROGRAM_DISABLE returned %d, " "r0 0x%04x, r1 0x%04x, r2 0x%04x\n", @@ -468,8 +468,8 @@ int hermesi_program_end(hermes_t *hw) hermes_write_regn(hw, EVACK, 0xFFFF); /* Reinitialise, ignoring return */ - (void) hermes_doicmd_wait(hw, 0x0000 | HERMES_CMD_INIT, - 0, 0, 0, NULL); + (void) hw->ops->init_cmd_wait(hw, 0x0000 | HERMES_CMD_INIT, + 0, 0, 0, NULL); return rc ? rc : err; } diff --git a/drivers/net/wireless/orinoco/hw.c b/drivers/net/wireless/orinoco/hw.c index 24ea4b4d487e..9c86acc42794 100644 --- a/drivers/net/wireless/orinoco/hw.c +++ b/drivers/net/wireless/orinoco/hw.c @@ -177,9 +177,9 @@ int determine_fw_capabilities(struct orinoco_private *priv, /* 3Com MAC : 00:50:DA:* */ memset(tmp, 0, sizeof(tmp)); /* Get the Symbol firmware version */ - err = hermes_read_ltv(hw, USER_BAP, - HERMES_RID_SECONDARYVERSION_SYMBOL, - SYMBOL_MAX_VER_LEN, NULL, &tmp); + err = hw->ops->read_ltv(hw, USER_BAP, + HERMES_RID_SECONDARYVERSION_SYMBOL, + SYMBOL_MAX_VER_LEN, NULL, &tmp); if (err) { dev_warn(dev, "Error %d reading Symbol firmware info. " "Wildly guessing capabilities...\n", err); @@ -286,8 +286,8 @@ int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr) u16 reclen; /* Get the MAC address */ - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, - ETH_ALEN, NULL, dev_addr); + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, + ETH_ALEN, NULL, dev_addr); if (err) { dev_warn(dev, "Failed to read MAC address!\n"); goto out; @@ -296,8 +296,8 @@ int orinoco_hw_read_card_settings(struct orinoco_private *priv, u8 *dev_addr) dev_dbg(dev, "MAC address %pM\n", dev_addr); /* Get the station name */ - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, - sizeof(nickbuf), &reclen, &nickbuf); + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, + sizeof(nickbuf), &reclen, &nickbuf); if (err) { dev_err(dev, "failed to read station name\n"); goto out; @@ -413,11 +413,11 @@ int orinoco_hw_allocate_fid(struct orinoco_private *priv) struct hermes *hw = &priv->hw; int err; - err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); + err = hw->ops->allocate(hw, priv->nicbuf_size, &priv->txfid); if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) { /* Try workaround for old Symbol firmware bug */ priv->nicbuf_size = TX_NICBUF_SIZE_BUG; - err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); + err = hw->ops->allocate(hw, priv->nicbuf_size, &priv->txfid); dev_warn(dev, "Firmware ALLOC bug detected " "(old Symbol firmware?). Work around %s\n", @@ -463,8 +463,9 @@ int orinoco_hw_program_rids(struct orinoco_private *priv) struct hermes_idstring idbuf; /* Set the MAC address */ - err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, - HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr); + err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR, + HERMES_BYTES_TO_RECLEN(ETH_ALEN), + dev->dev_addr); if (err) { printk(KERN_ERR "%s: Error %d setting MAC address\n", dev->name, err); @@ -527,7 +528,7 @@ int orinoco_hw_program_rids(struct orinoco_private *priv) idbuf.len = cpu_to_le16(strlen(priv->desired_essid)); memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val)); /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */ - err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID, + err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID, HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), &idbuf); if (err) { @@ -535,7 +536,7 @@ int orinoco_hw_program_rids(struct orinoco_private *priv) dev->name, err); return err; } - err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID, + err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID, HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2), &idbuf); if (err) { @@ -547,9 +548,9 @@ int orinoco_hw_program_rids(struct orinoco_private *priv) /* Set the station name */ idbuf.len = cpu_to_le16(strlen(priv->nick)); memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val)); - err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, - HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2), - &idbuf); + err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME, + HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2), + &idbuf); if (err) { printk(KERN_ERR "%s: Error %d setting nickname\n", dev->name, err); @@ -664,12 +665,12 @@ int orinoco_hw_program_rids(struct orinoco_private *priv) if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { /* Enable monitor mode */ dev->type = ARPHRD_IEEE80211; - err = hermes_docmd_wait(hw, HERMES_CMD_TEST | + err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | HERMES_TEST_MONITOR, 0, NULL); } else { /* Disable monitor mode */ dev->type = ARPHRD_ETHER; - err = hermes_docmd_wait(hw, HERMES_CMD_TEST | + err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | HERMES_TEST_STOP, 0, NULL); } if (err) @@ -695,8 +696,8 @@ int orinoco_hw_get_tkip_iv(struct orinoco_private *priv, int key, u8 *tsc) if ((key < 0) || (key >= 4)) return -EINVAL; - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV, - sizeof(tsc_arr), NULL, &tsc_arr); + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_TKIP_IV, + sizeof(tsc_arr), NULL, &tsc_arr); if (!err) memcpy(tsc, &tsc_arr[key][0], sizeof(tsc_arr[0])); @@ -875,7 +876,7 @@ int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv) memcpy(key, priv->keys[i].key, priv->keys[i].key_len); - err = hermes_write_ltv(hw, USER_BAP, + err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFDEFAULTKEY0 + i, HERMES_BYTES_TO_RECLEN(keylen), key); @@ -1092,7 +1093,7 @@ int __orinoco_hw_set_multicast_list(struct orinoco_private *priv, memcpy(mclist.addr[i++], p->dmi_addr, ETH_ALEN); } - err = hermes_write_ltv(hw, USER_BAP, + err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES, HERMES_BYTES_TO_RECLEN(mc_count * ETH_ALEN), &mclist); @@ -1134,15 +1135,15 @@ int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID : HERMES_RID_CNFDESIREDSSID; - err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf), - NULL, &essidbuf); + err = hw->ops->read_ltv(hw, USER_BAP, rid, sizeof(essidbuf), + NULL, &essidbuf); if (err) goto fail_unlock; } else { *active = 0; - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID, - sizeof(essidbuf), NULL, &essidbuf); + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID, + sizeof(essidbuf), NULL, &essidbuf); if (err) goto fail_unlock; } @@ -1213,8 +1214,8 @@ int orinoco_hw_get_bitratelist(struct orinoco_private *priv, if (orinoco_lock(priv, &flags) != 0) return -EBUSY; - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES, - sizeof(list), NULL, &list); + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES, + sizeof(list), NULL, &list); orinoco_unlock(priv, &flags); if (err) @@ -1281,7 +1282,7 @@ int orinoco_hw_trigger_scan(struct orinoco_private *priv, idbuf.len = cpu_to_le16(len); memcpy(idbuf.val, ssid->ssid, len); - err = hermes_write_ltv(hw, USER_BAP, + err = hw->ops->write_ltv(hw, USER_BAP, HERMES_RID_CNFSCANSSID_AGERE, HERMES_BYTES_TO_RECLEN(len + 2), &idbuf); @@ -1345,8 +1346,8 @@ int orinoco_hw_get_current_bssid(struct orinoco_private *priv, hermes_t *hw = &priv->hw; int err; - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, - ETH_ALEN, NULL, addr); + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, + ETH_ALEN, NULL, addr); return err; } diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c index b42634c614b5..d90951f731ef 100644 --- a/drivers/net/wireless/orinoco/main.c +++ b/drivers/net/wireless/orinoco/main.c @@ -399,8 +399,8 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev) memset(&desc, 0, sizeof(desc)); *txcntl = cpu_to_le16(tx_control); - err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), - txfid, 0); + err = hw->ops->bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), + txfid, 0); if (err) { if (net_ratelimit()) printk(KERN_ERR "%s: Error %d writing Tx " @@ -413,8 +413,8 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev) memset(&desc, 0, sizeof(desc)); desc.tx_control = cpu_to_le16(tx_control); - err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), - txfid, 0); + err = hw->ops->bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), + txfid, 0); if (err) { if (net_ratelimit()) printk(KERN_ERR "%s: Error %d writing Tx " @@ -457,8 +457,8 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev) memcpy(eh, &hdr, sizeof(hdr)); } - err = hermes_bap_pwrite(hw, USER_BAP, skb->data, skb->len, - txfid, HERMES_802_3_OFFSET); + err = hw->ops->bap_pwrite(hw, USER_BAP, skb->data, skb->len, + txfid, HERMES_802_3_OFFSET); if (err) { printk(KERN_ERR "%s: Error %d writing packet to BAP\n", dev->name, err); @@ -489,8 +489,8 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev) skb->data + ETH_HLEN, skb->len - ETH_HLEN, mic); /* Write the MIC */ - err = hermes_bap_pwrite(hw, USER_BAP, &mic_buf[0], len, - txfid, HERMES_802_3_OFFSET + offset); + err = hw->ops->bap_pwrite(hw, USER_BAP, &mic_buf[0], len, + txfid, HERMES_802_3_OFFSET + offset); if (err) { printk(KERN_ERR "%s: Error %d writing MIC to BAP\n", dev->name, err); @@ -501,7 +501,7 @@ static netdev_tx_t orinoco_xmit(struct sk_buff *skb, struct net_device *dev) /* Finally, we actually initiate the send */ netif_stop_queue(dev); - err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL, + err = hw->ops->cmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL, txfid, NULL); if (err) { netif_start_queue(dev); @@ -571,9 +571,9 @@ static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) return; /* Nothing's really happened */ /* Read part of the frame header - we need status and addr1 */ - err = hermes_bap_pread(hw, IRQ_BAP, &hdr, - sizeof(struct hermes_txexc_data), - fid, 0); + err = hw->ops->bap_pread(hw, IRQ_BAP, &hdr, + sizeof(struct hermes_txexc_data), + fid, 0); hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID); stats->tx_errors++; @@ -763,9 +763,9 @@ static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid, /* If any, copy the data from the card to the skb */ if (datalen > 0) { - err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, datalen), - ALIGN(datalen, 2), rxfid, - HERMES_802_2_OFFSET); + err = hw->ops->bap_pread(hw, IRQ_BAP, skb_put(skb, datalen), + ALIGN(datalen, 2), rxfid, + HERMES_802_2_OFFSET); if (err) { printk(KERN_ERR "%s: error %d reading monitor frame\n", dev->name, err); @@ -813,8 +813,8 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) rxfid = hermes_read_regn(hw, RXFID); - err = hermes_bap_pread(hw, IRQ_BAP, desc, sizeof(*desc), - rxfid, 0); + err = hw->ops->bap_pread(hw, IRQ_BAP, desc, sizeof(*desc), + rxfid, 0); if (err) { printk(KERN_ERR "%s: error %d reading Rx descriptor. " "Frame dropped.\n", dev->name, err); @@ -881,9 +881,9 @@ static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) nothing is removed. 2 is for aligning the IP header. */ skb_reserve(skb, ETH_HLEN + 2); - err = hermes_bap_pread(hw, IRQ_BAP, skb_put(skb, length), - ALIGN(length, 2), rxfid, - HERMES_802_2_OFFSET); + err = hw->ops->bap_pread(hw, IRQ_BAP, skb_put(skb, length), + ALIGN(length, 2), rxfid, + HERMES_802_2_OFFSET); if (err) { printk(KERN_ERR "%s: error %d reading frame. " "Frame dropped.\n", dev->name, err); @@ -1144,9 +1144,9 @@ static void orinoco_join_ap(struct work_struct *work) goto out; /* Read scan results from the firmware */ - err = hermes_read_ltv(hw, USER_BAP, - HERMES_RID_SCANRESULTSTABLE, - MAX_SCAN_LEN, &len, buf); + err = hw->ops->read_ltv(hw, USER_BAP, + HERMES_RID_SCANRESULTSTABLE, + MAX_SCAN_LEN, &len, buf); if (err) { printk(KERN_ERR "%s: Cannot read scan results\n", dev->name); @@ -1193,8 +1193,8 @@ static void orinoco_send_bssid_wevent(struct orinoco_private *priv) union iwreq_data wrqu; int err; - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, - ETH_ALEN, NULL, wrqu.ap_addr.sa_data); + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID, + ETH_ALEN, NULL, wrqu.ap_addr.sa_data); if (err != 0) return; @@ -1216,8 +1216,8 @@ static void orinoco_send_assocreqie_wevent(struct orinoco_private *priv) if (!priv->has_wpa) return; - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO, - sizeof(buf), NULL, &buf); + err = hw->ops->read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_REQ_INFO, + sizeof(buf), NULL, &buf); if (err != 0) return; @@ -1246,8 +1246,9 @@ static void orinoco_send_assocrespie_wevent(struct orinoco_private *priv) if (!priv->has_wpa) return; - err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENT_ASSOC_RESP_INFO, - sizeof(buf), NULL, &buf); + err = hw->ops->read_ltv(hw, USER_BAP, + HERMES_RID_CURRENT_ASSOC_RESP_INFO, + sizeof(buf), NULL, &buf); if (err != 0) return; @@ -1370,8 +1371,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) infofid = hermes_read_regn(hw, INFOFID); /* Read the info frame header - don't try too hard */ - err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info), - infofid, 0); + err = hw->ops->bap_pread(hw, IRQ_BAP, &info, sizeof(info), + infofid, 0); if (err) { printk(KERN_ERR "%s: error %d reading info frame. " "Frame dropped.\n", dev->name, err); @@ -1392,8 +1393,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) len = sizeof(tallies); } - err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len, - infofid, sizeof(info)); + err = hw->ops->bap_pread(hw, IRQ_BAP, &tallies, len, + infofid, sizeof(info)); if (err) break; @@ -1428,8 +1429,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) break; } - err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len, - infofid, sizeof(info)); + err = hw->ops->bap_pread(hw, IRQ_BAP, &linkstatus, len, + infofid, sizeof(info)); if (err) break; newstatus = le16_to_cpu(linkstatus.linkstatus); @@ -1493,8 +1494,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) } /* Read scan data */ - err = hermes_bap_pread(hw, IRQ_BAP, (void *) buf, len, - infofid, sizeof(info)); + err = hw->ops->bap_pread(hw, IRQ_BAP, (void *) buf, len, + infofid, sizeof(info)); if (err) { kfree(buf); qabort_scan(priv); @@ -1546,8 +1547,8 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) break; /* Read scan data */ - err = hermes_bap_pread(hw, IRQ_BAP, (void *) bss, len, - infofid, sizeof(info)); + err = hw->ops->bap_pread(hw, IRQ_BAP, (void *) bss, len, + infofid, sizeof(info)); if (err) kfree(bss); else @@ -1646,7 +1647,7 @@ static int orinoco_reinit_firmware(struct orinoco_private *priv) struct hermes *hw = &priv->hw; int err; - err = hermes_init(hw); + err = hw->ops->init(hw); if (priv->do_fw_download && !err) { err = orinoco_download(priv); if (err) @@ -1983,7 +1984,7 @@ int orinoco_init(struct orinoco_private *priv) priv->nicbuf_size = IEEE80211_MAX_FRAME_LEN + ETH_HLEN; /* Initialize the firmware */ - err = hermes_init(hw); + err = hw->ops->init(hw); if (err != 0) { dev_err(dev, "Failed to initialize firmware (err = %d)\n", err); diff --git a/drivers/net/wireless/orinoco/wext.c b/drivers/net/wireless/orinoco/wext.c index d261423ecf62..b7fef250237b 100644 --- a/drivers/net/wireless/orinoco/wext.c +++ b/drivers/net/wireless/orinoco/wext.c @@ -457,7 +457,7 @@ static int orinoco_ioctl_setfreq(struct net_device *dev, if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { /* Fast channel change - no commit if successful */ hermes_t *hw = &priv->hw; - err = hermes_docmd_wait(hw, HERMES_CMD_TEST | + err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | HERMES_TEST_SET_CHANNEL, chan, NULL); } @@ -1272,8 +1272,8 @@ static int orinoco_ioctl_getrid(struct net_device *dev, if (orinoco_lock(priv, &flags) != 0) return -EBUSY; - err = hermes_read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length, - extra); + err = hw->ops->read_ltv(hw, USER_BAP, rid, MAX_RID_LEN, &length, + extra); if (err) goto out; From 593ef09c9e70c92c0d76c67a1c03a5d44d3aec82 Mon Sep 17 00:00:00 2001 From: David Kilroy Date: Sat, 1 May 2010 14:05:39 +0100 Subject: [PATCH 092/109] orinoco: allow driver to specify netdev_ops Allow the main drivers to specify a custom version of the net_device_ops structure. This is required by orinoco_usb to supply a separate transmit function. Export existing net_device_ops callbacks so that the drivers can reuse some of the existing code. Signed-off-by: David Kilroy Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/airport.c | 2 +- drivers/net/wireless/orinoco/main.c | 28 +++++++++++++------ drivers/net/wireless/orinoco/orinoco.h | 11 +++++++- drivers/net/wireless/orinoco/orinoco_cs.c | 2 +- drivers/net/wireless/orinoco/orinoco_nortel.c | 2 +- drivers/net/wireless/orinoco/orinoco_pci.c | 2 +- drivers/net/wireless/orinoco/orinoco_plx.c | 2 +- drivers/net/wireless/orinoco/orinoco_tmd.c | 2 +- drivers/net/wireless/orinoco/spectrum_cs.c | 2 +- 9 files changed, 37 insertions(+), 16 deletions(-) diff --git a/drivers/net/wireless/orinoco/airport.c b/drivers/net/wireless/orinoco/airport.c index ea23c4fdbf62..7dac5adb6c1c 100644 --- a/drivers/net/wireless/orinoco/airport.c +++ b/drivers/net/wireless/orinoco/airport.c @@ -210,7 +210,7 @@ airport_attach(struct macio_dev *mdev, const struct of_device_id *match) } /* Register an interface with the stack */ - if (orinoco_if_add(priv, phys_addr, card->irq) != 0) { + if (orinoco_if_add(priv, phys_addr, card->irq, NULL) != 0) { printk(KERN_ERR PFX "orinoco_if_add() failed\n"); goto failed; } diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c index d90951f731ef..7acb6bc3ebff 100644 --- a/drivers/net/wireless/orinoco/main.c +++ b/drivers/net/wireless/orinoco/main.c @@ -253,7 +253,7 @@ void set_port_type(struct orinoco_private *priv) /* Device methods */ /********************************************************************/ -static int orinoco_open(struct net_device *dev) +int orinoco_open(struct net_device *dev) { struct orinoco_private *priv = ndev_priv(dev); unsigned long flags; @@ -271,8 +271,9 @@ static int orinoco_open(struct net_device *dev) return err; } +EXPORT_SYMBOL(orinoco_open); -static int orinoco_stop(struct net_device *dev) +int orinoco_stop(struct net_device *dev) { struct orinoco_private *priv = ndev_priv(dev); int err = 0; @@ -290,15 +291,17 @@ static int orinoco_stop(struct net_device *dev) return err; } +EXPORT_SYMBOL(orinoco_stop); -static struct net_device_stats *orinoco_get_stats(struct net_device *dev) +struct net_device_stats *orinoco_get_stats(struct net_device *dev) { struct orinoco_private *priv = ndev_priv(dev); return &priv->stats; } +EXPORT_SYMBOL(orinoco_get_stats); -static void orinoco_set_multicast_list(struct net_device *dev) +void orinoco_set_multicast_list(struct net_device *dev) { struct orinoco_private *priv = ndev_priv(dev); unsigned long flags; @@ -312,8 +315,9 @@ static void orinoco_set_multicast_list(struct net_device *dev) __orinoco_set_multicast_list(dev); orinoco_unlock(priv, &flags); } +EXPORT_SYMBOL(orinoco_set_multicast_list); -static int orinoco_change_mtu(struct net_device *dev, int new_mtu) +int orinoco_change_mtu(struct net_device *dev, int new_mtu) { struct orinoco_private *priv = ndev_priv(dev); @@ -329,6 +333,7 @@ static int orinoco_change_mtu(struct net_device *dev, int new_mtu) return 0; } +EXPORT_SYMBOL(orinoco_change_mtu); /********************************************************************/ /* Tx path */ @@ -614,7 +619,7 @@ static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw) netif_wake_queue(dev); } -static void orinoco_tx_timeout(struct net_device *dev) +void orinoco_tx_timeout(struct net_device *dev) { struct orinoco_private *priv = ndev_priv(dev); struct net_device_stats *stats = &priv->stats; @@ -629,6 +634,7 @@ static void orinoco_tx_timeout(struct net_device *dev) schedule_work(&priv->reset_work); } +EXPORT_SYMBOL(orinoco_tx_timeout); /********************************************************************/ /* Rx path (data frames) */ @@ -2192,7 +2198,8 @@ EXPORT_SYMBOL(alloc_orinocodev); */ int orinoco_if_add(struct orinoco_private *priv, unsigned long base_addr, - unsigned int irq) + unsigned int irq, + const struct net_device_ops *ops) { struct wiphy *wiphy = priv_to_wiphy(priv); struct wireless_dev *wdev; @@ -2211,12 +2218,17 @@ int orinoco_if_add(struct orinoco_private *priv, /* Setup / override net_device fields */ dev->ieee80211_ptr = wdev; - dev->netdev_ops = &orinoco_netdev_ops; dev->watchdog_timeo = HZ; /* 1 second timeout */ dev->wireless_handlers = &orinoco_handler_def; #ifdef WIRELESS_SPY dev->wireless_data = &priv->wireless_data; #endif + /* Default to standard ops if not set */ + if (ops) + dev->netdev_ops = ops; + else + dev->netdev_ops = &orinoco_netdev_ops; + /* we use the default eth_mac_addr for setting the MAC addr */ /* Reserve space in skb for the SNAP header */ diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h index ff6b7b1d421d..f1901d6e6af8 100644 --- a/drivers/net/wireless/orinoco/orinoco.h +++ b/drivers/net/wireless/orinoco/orinoco.h @@ -190,12 +190,21 @@ extern void free_orinocodev(struct orinoco_private *priv); extern int orinoco_init(struct orinoco_private *priv); extern int orinoco_if_add(struct orinoco_private *priv, unsigned long base_addr, - unsigned int irq); + unsigned int irq, + const struct net_device_ops *ops); extern void orinoco_if_del(struct orinoco_private *priv); extern int orinoco_up(struct orinoco_private *priv); extern void orinoco_down(struct orinoco_private *priv); extern irqreturn_t orinoco_interrupt(int irq, void *dev_id); +/* Common ndo functions exported for reuse by orinoco_usb */ +int orinoco_open(struct net_device *dev); +int orinoco_stop(struct net_device *dev); +struct net_device_stats *orinoco_get_stats(struct net_device *dev); +void orinoco_set_multicast_list(struct net_device *dev); +int orinoco_change_mtu(struct net_device *dev, int new_mtu); +void orinoco_tx_timeout(struct net_device *dev); + /********************************************************************/ /* Locking and synchronization functions */ /********************************************************************/ diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index fdc961379170..525f74e68294 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -296,7 +296,7 @@ orinoco_cs_config(struct pcmcia_device *link) /* Register an interface with the stack */ if (orinoco_if_add(priv, link->io.BasePort1, - link->irq.AssignedIRQ) != 0) { + link->irq.AssignedIRQ, NULL) != 0) { printk(KERN_ERR PFX "orinoco_if_add() failed\n"); goto failed; } diff --git a/drivers/net/wireless/orinoco/orinoco_nortel.c b/drivers/net/wireless/orinoco/orinoco_nortel.c index 075f446b3139..bc3ea0b67a4f 100644 --- a/drivers/net/wireless/orinoco/orinoco_nortel.c +++ b/drivers/net/wireless/orinoco/orinoco_nortel.c @@ -220,7 +220,7 @@ static int orinoco_nortel_init_one(struct pci_dev *pdev, goto fail; } - err = orinoco_if_add(priv, 0, 0); + err = orinoco_if_add(priv, 0, 0, NULL); if (err) { printk(KERN_ERR PFX "orinoco_if_add() failed\n"); goto fail; diff --git a/drivers/net/wireless/orinoco/orinoco_pci.c b/drivers/net/wireless/orinoco/orinoco_pci.c index bda5317cc596..468197f86673 100644 --- a/drivers/net/wireless/orinoco/orinoco_pci.c +++ b/drivers/net/wireless/orinoco/orinoco_pci.c @@ -170,7 +170,7 @@ static int orinoco_pci_init_one(struct pci_dev *pdev, goto fail; } - err = orinoco_if_add(priv, 0, 0); + err = orinoco_if_add(priv, 0, 0, NULL); if (err) { printk(KERN_ERR PFX "orinoco_if_add() failed\n"); goto fail; diff --git a/drivers/net/wireless/orinoco/orinoco_plx.c b/drivers/net/wireless/orinoco/orinoco_plx.c index e0d5874ab42f..9358f4d2307b 100644 --- a/drivers/net/wireless/orinoco/orinoco_plx.c +++ b/drivers/net/wireless/orinoco/orinoco_plx.c @@ -259,7 +259,7 @@ static int orinoco_plx_init_one(struct pci_dev *pdev, goto fail; } - err = orinoco_if_add(priv, 0, 0); + err = orinoco_if_add(priv, 0, 0, NULL); if (err) { printk(KERN_ERR PFX "orinoco_if_add() failed\n"); goto fail; diff --git a/drivers/net/wireless/orinoco/orinoco_tmd.c b/drivers/net/wireless/orinoco/orinoco_tmd.c index 88cbc7902aa0..784605f0af15 100644 --- a/drivers/net/wireless/orinoco/orinoco_tmd.c +++ b/drivers/net/wireless/orinoco/orinoco_tmd.c @@ -156,7 +156,7 @@ static int orinoco_tmd_init_one(struct pci_dev *pdev, goto fail; } - err = orinoco_if_add(priv, 0, 0); + err = orinoco_if_add(priv, 0, 0, NULL); if (err) { printk(KERN_ERR PFX "orinoco_if_add() failed\n"); goto fail; diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 59bda240fdc2..77b58717d185 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -374,7 +374,7 @@ spectrum_cs_config(struct pcmcia_device *link) /* Register an interface with the stack */ if (orinoco_if_add(priv, link->io.BasePort1, - link->irq.AssignedIRQ) != 0) { + link->irq.AssignedIRQ, NULL) != 0) { printk(KERN_ERR PFX "orinoco_if_add() failed\n"); goto failed; } From bcad6e80f3fb0d6724c3814cf32258bbcf1d67db Mon Sep 17 00:00:00 2001 From: David Kilroy Date: Sat, 1 May 2010 14:05:40 +0100 Subject: [PATCH 093/109] orinoco: encapsulate driver locking Local bus and USB drivers will need to do locking differently. The original orinoco_usb patches had a boolean variable controlling whether spin_lock_bh was used, or irq based locking. This version provides wrappers for the lock functions and the drivers specify the functions pointers needed. This will introduce a performance penalty, but I'm not expecting it to be noticable. Signed-off-by: David Kilroy Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/airport.c | 4 ++-- drivers/net/wireless/orinoco/hermes.c | 28 +++++++++++++++++++++- drivers/net/wireless/orinoco/hermes.h | 4 ++++ drivers/net/wireless/orinoco/main.c | 20 ++++++++-------- drivers/net/wireless/orinoco/orinoco.h | 16 ++++++++++--- drivers/net/wireless/orinoco/orinoco_cs.c | 4 ++-- drivers/net/wireless/orinoco/spectrum_cs.c | 4 ++-- 7 files changed, 60 insertions(+), 20 deletions(-) diff --git a/drivers/net/wireless/orinoco/airport.c b/drivers/net/wireless/orinoco/airport.c index 7dac5adb6c1c..9bcee10c9308 100644 --- a/drivers/net/wireless/orinoco/airport.c +++ b/drivers/net/wireless/orinoco/airport.c @@ -77,9 +77,9 @@ airport_resume(struct macio_dev *mdev) enable_irq(card->irq); - spin_lock_irqsave(&priv->lock, flags); + priv->hw.ops->lock_irqsave(&priv->lock, &flags); err = orinoco_up(priv); - spin_unlock_irqrestore(&priv->lock, flags); + priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); return err; } diff --git a/drivers/net/wireless/orinoco/hermes.c b/drivers/net/wireless/orinoco/hermes.c index a7df5240779c..845693fb25f3 100644 --- a/drivers/net/wireless/orinoco/hermes.c +++ b/drivers/net/wireless/orinoco/hermes.c @@ -529,6 +529,28 @@ static int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, return err; } +static void hermes_lock_irqsave(spinlock_t *lock, + unsigned long *flags) __acquires(lock) +{ + spin_lock_irqsave(lock, *flags); +} + +static void hermes_unlock_irqrestore(spinlock_t *lock, + unsigned long *flags) __releases(lock) +{ + spin_unlock_irqrestore(lock, *flags); +} + +static void hermes_lock_irq(spinlock_t *lock) __acquires(lock) +{ + spin_lock_irq(lock); +} + +static void hermes_unlock_irq(spinlock_t *lock) __releases(lock) +{ + spin_unlock_irq(lock); +} + /* Hermes operations for local buses */ static const struct hermes_ops hermes_ops_local = { .init = hermes_init, @@ -538,5 +560,9 @@ static const struct hermes_ops hermes_ops_local = { .read_ltv = hermes_read_ltv, .write_ltv = hermes_write_ltv, .bap_pread = hermes_bap_pread, - .bap_pwrite = hermes_bap_pwrite + .bap_pwrite = hermes_bap_pwrite, + .lock_irqsave = hermes_lock_irqsave, + .unlock_irqrestore = hermes_unlock_irqrestore, + .lock_irq = hermes_lock_irq, + .unlock_irq = hermes_unlock_irq, }; diff --git a/drivers/net/wireless/orinoco/hermes.h b/drivers/net/wireless/orinoco/hermes.h index 18b268c54dfe..9e21ecdb4e70 100644 --- a/drivers/net/wireless/orinoco/hermes.h +++ b/drivers/net/wireless/orinoco/hermes.h @@ -393,6 +393,10 @@ struct hermes_ops { u16 id, u16 offset); int (*bap_pwrite)(struct hermes *hw, int bap, const void *buf, int len, u16 id, u16 offset); + void (*lock_irqsave)(spinlock_t *lock, unsigned long *flags); + void (*unlock_irqrestore)(spinlock_t *lock, unsigned long *flags); + void (*lock_irq)(spinlock_t *lock); + void (*unlock_irq)(spinlock_t *lock); }; /* Basic control structure */ diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c index 7acb6bc3ebff..36c4ba865c7c 100644 --- a/drivers/net/wireless/orinoco/main.c +++ b/drivers/net/wireless/orinoco/main.c @@ -281,13 +281,13 @@ int orinoco_stop(struct net_device *dev) /* We mustn't use orinoco_lock() here, because we need to be able to close the interface even if hw_unavailable is set (e.g. as we're released after a PC Card removal) */ - spin_lock_irq(&priv->lock); + orinoco_lock_irq(priv); priv->open = 0; err = __orinoco_down(priv); - spin_unlock_irq(&priv->lock); + orinoco_unlock_irq(priv); return err; } @@ -1741,7 +1741,7 @@ void orinoco_reset(struct work_struct *work) } /* This has to be called from user context */ - spin_lock_irq(&priv->lock); + orinoco_lock_irq(priv); priv->hw_unavailable--; @@ -1756,7 +1756,7 @@ void orinoco_reset(struct work_struct *work) dev->trans_start = jiffies; } - spin_unlock_irq(&priv->lock); + orinoco_unlock_irq(priv); return; disable: @@ -2073,9 +2073,9 @@ int orinoco_init(struct orinoco_private *priv) /* Make the hardware available, as long as it hasn't been * removed elsewhere (e.g. by PCMCIA hot unplug) */ - spin_lock_irq(&priv->lock); + orinoco_lock_irq(priv); priv->hw_unavailable--; - spin_unlock_irq(&priv->lock); + orinoco_unlock_irq(priv); dev_dbg(dev, "Ready\n"); @@ -2317,7 +2317,7 @@ int orinoco_up(struct orinoco_private *priv) unsigned long flags; int err; - spin_lock_irqsave(&priv->lock, flags); + priv->hw.ops->lock_irqsave(&priv->lock, &flags); err = orinoco_reinit_firmware(priv); if (err) { @@ -2337,7 +2337,7 @@ int orinoco_up(struct orinoco_private *priv) } exit: - spin_unlock_irqrestore(&priv->lock, flags); + priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); return 0; } @@ -2349,7 +2349,7 @@ void orinoco_down(struct orinoco_private *priv) unsigned long flags; int err; - spin_lock_irqsave(&priv->lock, flags); + priv->hw.ops->lock_irqsave(&priv->lock, &flags); err = __orinoco_down(priv); if (err) printk(KERN_WARNING "%s: Error %d downing interface\n", @@ -2357,7 +2357,7 @@ void orinoco_down(struct orinoco_private *priv) netif_device_detach(dev); priv->hw_unavailable++; - spin_unlock_irqrestore(&priv->lock, flags); + priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); } EXPORT_SYMBOL(orinoco_down); diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h index f1901d6e6af8..80a1386ce0b4 100644 --- a/drivers/net/wireless/orinoco/orinoco.h +++ b/drivers/net/wireless/orinoco/orinoco.h @@ -212,11 +212,11 @@ void orinoco_tx_timeout(struct net_device *dev); static inline int orinoco_lock(struct orinoco_private *priv, unsigned long *flags) { - spin_lock_irqsave(&priv->lock, *flags); + priv->hw.ops->lock_irqsave(&priv->lock, flags); if (priv->hw_unavailable) { DEBUG(1, "orinoco_lock() called with hw_unavailable (dev=%p)\n", priv->ndev); - spin_unlock_irqrestore(&priv->lock, *flags); + priv->hw.ops->unlock_irqrestore(&priv->lock, flags); return -EBUSY; } return 0; @@ -225,7 +225,17 @@ static inline int orinoco_lock(struct orinoco_private *priv, static inline void orinoco_unlock(struct orinoco_private *priv, unsigned long *flags) { - spin_unlock_irqrestore(&priv->lock, *flags); + priv->hw.ops->unlock_irqrestore(&priv->lock, flags); +} + +static inline void orinoco_lock_irq(struct orinoco_private *priv) +{ + priv->hw.ops->lock_irq(&priv->lock); +} + +static inline void orinoco_unlock_irq(struct orinoco_private *priv) +{ + priv->hw.ops->unlock_irq(&priv->lock); } /*** Navigate from net_device to orinoco_private ***/ diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c index 525f74e68294..f99b13ba92b3 100644 --- a/drivers/net/wireless/orinoco/orinoco_cs.c +++ b/drivers/net/wireless/orinoco/orinoco_cs.c @@ -327,9 +327,9 @@ orinoco_cs_release(struct pcmcia_device *link) /* We're committed to taking the device away now, so mark the * hardware as unavailable */ - spin_lock_irqsave(&priv->lock, flags); + priv->hw.ops->lock_irqsave(&priv->lock, &flags); priv->hw_unavailable++; - spin_unlock_irqrestore(&priv->lock, flags); + priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); pcmcia_disable_device(link); if (priv->hw.iobase) diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index 77b58717d185..b4f68ef771e4 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -405,9 +405,9 @@ spectrum_cs_release(struct pcmcia_device *link) /* We're committed to taking the device away now, so mark the * hardware as unavailable */ - spin_lock_irqsave(&priv->lock, flags); + priv->hw.ops->lock_irqsave(&priv->lock, &flags); priv->hw_unavailable++; - spin_unlock_irqrestore(&priv->lock, flags); + priv->hw.ops->unlock_irqrestore(&priv->lock, &flags); pcmcia_disable_device(link); if (priv->hw.iobase) From 9afac70a7305817b22327ac23cf2d0eb72388229 Mon Sep 17 00:00:00 2001 From: David Kilroy Date: Sat, 1 May 2010 14:05:41 +0100 Subject: [PATCH 094/109] orinoco: add orinoco_usb driver This driver uses the core orinoco modules for the bulk of the functionality. The low level hermes routines (for local bus cards) are replaced, the driver supplies its own ndo_xmit_start function, and locking is done with the _bh variant. Some recent functionality is not available to the USB cards yet (firmware loading and WPA). Out-of-tree driver originally written by Manuel Estrada Sainz. Thanks to Mark Davis for supplying hardware to test the updates. Signed-off-by: David Kilroy Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/Kconfig | 7 + drivers/net/wireless/orinoco/Makefile | 1 + drivers/net/wireless/orinoco/hermes.h | 1 + drivers/net/wireless/orinoco/main.c | 6 +- drivers/net/wireless/orinoco/orinoco.h | 3 + drivers/net/wireless/orinoco/orinoco_usb.c | 1680 ++++++++++++++++++++ 6 files changed, 1696 insertions(+), 2 deletions(-) create mode 100644 drivers/net/wireless/orinoco/orinoco_usb.c diff --git a/drivers/net/wireless/orinoco/Kconfig b/drivers/net/wireless/orinoco/Kconfig index 6116b546861d..60819bcf4377 100644 --- a/drivers/net/wireless/orinoco/Kconfig +++ b/drivers/net/wireless/orinoco/Kconfig @@ -132,3 +132,10 @@ config PCMCIA_SPECTRUM This driver requires firmware download on startup. Utilities for downloading Symbol firmware are available at + +config ORINOCO_USB + tristate "Agere Orinoco USB support" + depends on USB && HERMES + select FW_LOADER + ---help--- + This driver is for USB versions of the Agere Orinoco card. diff --git a/drivers/net/wireless/orinoco/Makefile b/drivers/net/wireless/orinoco/Makefile index e6452698eba9..bfdefb85abcd 100644 --- a/drivers/net/wireless/orinoco/Makefile +++ b/drivers/net/wireless/orinoco/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_PCI_HERMES) += orinoco_pci.o obj-$(CONFIG_TMD_HERMES) += orinoco_tmd.o obj-$(CONFIG_NORTEL_HERMES) += orinoco_nortel.o obj-$(CONFIG_PCMCIA_SPECTRUM) += spectrum_cs.o +obj-$(CONFIG_ORINOCO_USB) += orinoco_usb.o # Orinoco should be endian clean. ccflags-y += -D__CHECK_ENDIAN__ diff --git a/drivers/net/wireless/orinoco/hermes.h b/drivers/net/wireless/orinoco/hermes.h index 9e21ecdb4e70..aed14ff2d235 100644 --- a/drivers/net/wireless/orinoco/hermes.h +++ b/drivers/net/wireless/orinoco/hermes.h @@ -407,6 +407,7 @@ typedef struct hermes { #define HERMES_32BIT_REGSPACING 1 u16 inten; /* Which interrupts should be enabled? */ const struct hermes_ops *ops; + void *priv; } hermes_t; /* Register access convenience macros */ diff --git a/drivers/net/wireless/orinoco/main.c b/drivers/net/wireless/orinoco/main.c index 36c4ba865c7c..7c9faa4c079e 100644 --- a/drivers/net/wireless/orinoco/main.c +++ b/drivers/net/wireless/orinoco/main.c @@ -797,7 +797,7 @@ static void orinoco_rx_monitor(struct net_device *dev, u16 rxfid, stats->rx_dropped++; } -static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) +void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw) { struct orinoco_private *priv = ndev_priv(dev); struct net_device_stats *stats = &priv->stats; @@ -918,6 +918,7 @@ update_stats: out: kfree(desc); } +EXPORT_SYMBOL(__orinoco_ev_rx); static void orinoco_rx(struct net_device *dev, struct hermes_rx_descriptor *desc, @@ -1359,7 +1360,7 @@ static void orinoco_process_scan_results(struct work_struct *work) spin_unlock_irqrestore(&priv->scan_lock, flags); } -static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) +void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) { struct orinoco_private *priv = ndev_priv(dev); u16 infofid; @@ -1577,6 +1578,7 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) return; } +EXPORT_SYMBOL(__orinoco_ev_info); static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw) { diff --git a/drivers/net/wireless/orinoco/orinoco.h b/drivers/net/wireless/orinoco/orinoco.h index 80a1386ce0b4..e9f415a56d4d 100644 --- a/drivers/net/wireless/orinoco/orinoco.h +++ b/drivers/net/wireless/orinoco/orinoco.h @@ -197,6 +197,9 @@ extern int orinoco_up(struct orinoco_private *priv); extern void orinoco_down(struct orinoco_private *priv); extern irqreturn_t orinoco_interrupt(int irq, void *dev_id); +extern void __orinoco_ev_info(struct net_device *dev, hermes_t *hw); +extern void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw); + /* Common ndo functions exported for reuse by orinoco_usb */ int orinoco_open(struct net_device *dev); int orinoco_stop(struct net_device *dev); diff --git a/drivers/net/wireless/orinoco/orinoco_usb.c b/drivers/net/wireless/orinoco/orinoco_usb.c new file mode 100644 index 000000000000..ce0069de5c46 --- /dev/null +++ b/drivers/net/wireless/orinoco/orinoco_usb.c @@ -0,0 +1,1680 @@ +/* + * USB Orinoco driver + * + * Copyright (c) 2003 Manuel Estrada Sainz + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use your + * version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + * + * Queueing code based on linux-wlan-ng 0.2.1-pre5 + * + * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. + * + * The license is the same as above. + * + * Initialy based on USB Skeleton driver - 0.7 + * + * Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * NOTE: The original USB Skeleton driver is GPL, but all that code is + * gone so MPL/GPL applies. + */ + +#define DRIVER_NAME "orinoco_usb" +#define PFX DRIVER_NAME ": " + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include "orinoco.h" + +#ifndef URB_ASYNC_UNLINK +#define URB_ASYNC_UNLINK 0 +#endif + +/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */ +static const u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00}; +#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2) + +struct header_struct { + /* 802.3 */ + u8 dest[ETH_ALEN]; + u8 src[ETH_ALEN]; + __be16 len; + /* 802.2 */ + u8 dsap; + u8 ssap; + u8 ctrl; + /* SNAP */ + u8 oui[3]; + __be16 ethertype; +} __attribute__ ((packed)); + +struct ez_usb_fw { + u16 size; + const u8 *code; +}; + +static struct ez_usb_fw firmware = { + .size = 0, + .code = NULL, +}; + +#ifdef CONFIG_USB_DEBUG +static int debug = 1; +#else +static int debug; +#endif + +/* Debugging macros */ +#undef dbg +#define dbg(format, arg...) \ + do { if (debug) printk(KERN_DEBUG PFX "%s: " format "\n", \ + __func__ , ## arg); } while (0) +#undef err +#define err(format, arg...) \ + do { printk(KERN_ERR PFX format "\n", ## arg); } while (0) + +/* Module paramaters */ +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug enabled or not"); + +MODULE_FIRMWARE("orinoco_ezusb_fw"); + +/* + * Under some conditions, the card gets stuck and stops paying attention + * to the world (i.e. data communication stalls) until we do something to + * it. Sending an INQ_TALLIES command seems to be enough and should be + * harmless otherwise. This behaviour has been observed when using the + * driver on a systemimager client during installation. In the past a + * timer was used to send INQ_TALLIES commands when there was no other + * activity, but it was troublesome and was removed. + */ + +#define USB_COMPAQ_VENDOR_ID 0x049f /* Compaq Computer Corp. */ +#define USB_COMPAQ_WL215_ID 0x001f /* Compaq WL215 USB Adapter */ +#define USB_COMPAQ_W200_ID 0x0076 /* Compaq W200 USB Adapter */ +#define USB_HP_WL215_ID 0x0082 /* Compaq WL215 USB Adapter */ + +#define USB_MELCO_VENDOR_ID 0x0411 +#define USB_BUFFALO_L11_ID 0x0006 /* BUFFALO WLI-USB-L11 */ +#define USB_BUFFALO_L11G_WR_ID 0x000B /* BUFFALO WLI-USB-L11G-WR */ +#define USB_BUFFALO_L11G_ID 0x000D /* BUFFALO WLI-USB-L11G */ + +#define USB_LUCENT_VENDOR_ID 0x047E /* Lucent Technologies */ +#define USB_LUCENT_ORINOCO_ID 0x0300 /* Lucent/Agere Orinoco USB Client */ + +#define USB_AVAYA8_VENDOR_ID 0x0D98 +#define USB_AVAYAE_VENDOR_ID 0x0D9E +#define USB_AVAYA_WIRELESS_ID 0x0300 /* Avaya Wireless USB Card */ + +#define USB_AGERE_VENDOR_ID 0x0D4E /* Agere Systems */ +#define USB_AGERE_MODEL0801_ID 0x1000 /* Wireless USB Card Model 0801 */ +#define USB_AGERE_MODEL0802_ID 0x1001 /* Wireless USB Card Model 0802 */ +#define USB_AGERE_REBRANDED_ID 0x047A /* WLAN USB Card */ + +#define USB_ELSA_VENDOR_ID 0x05CC +#define USB_ELSA_AIRLANCER_ID 0x3100 /* ELSA AirLancer USB-11 */ + +#define USB_LEGEND_VENDOR_ID 0x0E7C +#define USB_LEGEND_JOYNET_ID 0x0300 /* Joynet WLAN USB Card */ + +#define USB_SAMSUNG_VENDOR_ID 0x04E8 +#define USB_SAMSUNG_SEW2001U1_ID 0x5002 /* Samsung SEW-2001u Card */ +#define USB_SAMSUNG_SEW2001U2_ID 0x5B11 /* Samsung SEW-2001u Card */ +#define USB_SAMSUNG_SEW2003U_ID 0x7011 /* Samsung SEW-2003U Card */ + +#define USB_IGATE_VENDOR_ID 0x0681 +#define USB_IGATE_IGATE_11M_ID 0x0012 /* I-GATE 11M USB Card */ + +#define USB_FUJITSU_VENDOR_ID 0x0BF8 +#define USB_FUJITSU_E1100_ID 0x1002 /* connect2AIR WLAN E-1100 USB */ + +#define USB_2WIRE_VENDOR_ID 0x1630 +#define USB_2WIRE_WIRELESS_ID 0xff81 /* 2Wire Wireless USB adapter */ + + +#define EZUSB_REQUEST_FW_TRANS 0xA0 +#define EZUSB_REQUEST_TRIGER 0xAA +#define EZUSB_REQUEST_TRIG_AC 0xAC +#define EZUSB_CPUCS_REG 0x7F92 + +#define EZUSB_RID_TX 0x0700 +#define EZUSB_RID_RX 0x0701 +#define EZUSB_RID_INIT1 0x0702 +#define EZUSB_RID_ACK 0x0710 +#define EZUSB_RID_DOCMD 0x0860 + +/* Recognize info frames */ +#define EZUSB_IS_INFO(id) ((id >= 0xF000) && (id <= 0xF2FF)) + +#define EZUSB_MAGIC 0x0210 + +#define EZUSB_FRAME_DATA 1 +#define EZUSB_FRAME_CONTROL 2 + +#define DEF_TIMEOUT (3*HZ) + +#define BULK_BUF_SIZE 2048 + +#define FW_BUF_SIZE 64 +#define FW_VAR_OFFSET_PTR 0x359 +#define FW_VAR_VALUE 0 +#define FW_HOLE_START 0x100 +#define FW_HOLE_END 0x300 + +struct ezusb_packet { + __le16 magic; /* 0x0210 */ + u8 req_reply_count; + u8 ans_reply_count; + __le16 frame_type; /* 0x01 for data frames, 0x02 otherwise */ + __le16 size; /* transport size */ + __le16 crc; /* CRC up to here */ + __le16 hermes_len; + __le16 hermes_rid; + u8 data[0]; +} __attribute__ ((packed)); + +/* Table of devices that work or may work with this driver */ +static struct usb_device_id ezusb_table[] = { + {USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_COMPAQ_WL215_ID)}, + {USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_HP_WL215_ID)}, + {USB_DEVICE(USB_COMPAQ_VENDOR_ID, USB_COMPAQ_W200_ID)}, + {USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11_ID)}, + {USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11G_WR_ID)}, + {USB_DEVICE(USB_MELCO_VENDOR_ID, USB_BUFFALO_L11G_ID)}, + {USB_DEVICE(USB_LUCENT_VENDOR_ID, USB_LUCENT_ORINOCO_ID)}, + {USB_DEVICE(USB_AVAYA8_VENDOR_ID, USB_AVAYA_WIRELESS_ID)}, + {USB_DEVICE(USB_AVAYAE_VENDOR_ID, USB_AVAYA_WIRELESS_ID)}, + {USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_MODEL0801_ID)}, + {USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_MODEL0802_ID)}, + {USB_DEVICE(USB_ELSA_VENDOR_ID, USB_ELSA_AIRLANCER_ID)}, + {USB_DEVICE(USB_LEGEND_VENDOR_ID, USB_LEGEND_JOYNET_ID)}, + {USB_DEVICE_VER(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2001U1_ID, + 0, 0)}, + {USB_DEVICE(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2001U2_ID)}, + {USB_DEVICE(USB_SAMSUNG_VENDOR_ID, USB_SAMSUNG_SEW2003U_ID)}, + {USB_DEVICE(USB_IGATE_VENDOR_ID, USB_IGATE_IGATE_11M_ID)}, + {USB_DEVICE(USB_FUJITSU_VENDOR_ID, USB_FUJITSU_E1100_ID)}, + {USB_DEVICE(USB_2WIRE_VENDOR_ID, USB_2WIRE_WIRELESS_ID)}, + {USB_DEVICE(USB_AGERE_VENDOR_ID, USB_AGERE_REBRANDED_ID)}, + {} /* Terminating entry */ +}; + +MODULE_DEVICE_TABLE(usb, ezusb_table); + +/* Structure to hold all of our device specific stuff */ +struct ezusb_priv { + struct usb_device *udev; + struct net_device *dev; + struct mutex mtx; + spinlock_t req_lock; + struct list_head req_pending; + struct list_head req_active; + spinlock_t reply_count_lock; + u16 hermes_reg_fake[0x40]; + u8 *bap_buf; + struct urb *read_urb; + int read_pipe; + int write_pipe; + u8 reply_count; +}; + +enum ezusb_state { + EZUSB_CTX_START, + EZUSB_CTX_QUEUED, + EZUSB_CTX_REQ_SUBMITTED, + EZUSB_CTX_REQ_COMPLETE, + EZUSB_CTX_RESP_RECEIVED, + EZUSB_CTX_REQ_TIMEOUT, + EZUSB_CTX_REQ_FAILED, + EZUSB_CTX_RESP_TIMEOUT, + EZUSB_CTX_REQSUBMIT_FAIL, + EZUSB_CTX_COMPLETE, +}; + +struct request_context { + struct list_head list; + atomic_t refcount; + struct completion done; /* Signals that CTX is dead */ + int killed; + struct urb *outurb; /* OUT for req pkt */ + struct ezusb_priv *upriv; + struct ezusb_packet *buf; + int buf_length; + struct timer_list timer; /* Timeout handling */ + enum ezusb_state state; /* Current state */ + /* the RID that we will wait for */ + u16 out_rid; + u16 in_rid; +}; + + +/* Forward declarations */ +static void ezusb_ctx_complete(struct request_context *ctx); +static void ezusb_req_queue_run(struct ezusb_priv *upriv); +static void ezusb_bulk_in_callback(struct urb *urb); + +static inline u8 ezusb_reply_inc(u8 count) +{ + if (count < 0x7F) + return count + 1; + else + return 1; +} + +static void ezusb_request_context_put(struct request_context *ctx) +{ + if (!atomic_dec_and_test(&ctx->refcount)) + return; + + WARN_ON(!ctx->done.done); + BUG_ON(ctx->outurb->status == -EINPROGRESS); + BUG_ON(timer_pending(&ctx->timer)); + usb_free_urb(ctx->outurb); + kfree(ctx->buf); + kfree(ctx); +} + +static inline void ezusb_mod_timer(struct ezusb_priv *upriv, + struct timer_list *timer, + unsigned long expire) +{ + if (!upriv->udev) + return; + mod_timer(timer, expire); +} + +static void ezusb_request_timerfn(u_long _ctx) +{ + struct request_context *ctx = (void *) _ctx; + + ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK; + if (usb_unlink_urb(ctx->outurb) == -EINPROGRESS) { + ctx->state = EZUSB_CTX_REQ_TIMEOUT; + } else { + ctx->state = EZUSB_CTX_RESP_TIMEOUT; + dbg("couldn't unlink"); + atomic_inc(&ctx->refcount); + ctx->killed = 1; + ezusb_ctx_complete(ctx); + ezusb_request_context_put(ctx); + } +}; + +static struct request_context *ezusb_alloc_ctx(struct ezusb_priv *upriv, + u16 out_rid, u16 in_rid) +{ + struct request_context *ctx; + + ctx = kmalloc(sizeof(*ctx), GFP_ATOMIC); + if (!ctx) + return NULL; + + memset(ctx, 0, sizeof(*ctx)); + + ctx->buf = kmalloc(BULK_BUF_SIZE, GFP_ATOMIC); + if (!ctx->buf) { + kfree(ctx); + return NULL; + } + ctx->outurb = usb_alloc_urb(0, GFP_ATOMIC); + if (!ctx->outurb) { + kfree(ctx->buf); + kfree(ctx); + return NULL; + } + + ctx->upriv = upriv; + ctx->state = EZUSB_CTX_START; + ctx->out_rid = out_rid; + ctx->in_rid = in_rid; + + atomic_set(&ctx->refcount, 1); + init_completion(&ctx->done); + + init_timer(&ctx->timer); + ctx->timer.function = ezusb_request_timerfn; + ctx->timer.data = (u_long) ctx; + return ctx; +} + + +/* Hopefully the real complete_all will soon be exported, in the mean + * while this should work. */ +static inline void ezusb_complete_all(struct completion *comp) +{ + complete(comp); + complete(comp); + complete(comp); + complete(comp); +} + +static void ezusb_ctx_complete(struct request_context *ctx) +{ + struct ezusb_priv *upriv = ctx->upriv; + unsigned long flags; + + spin_lock_irqsave(&upriv->req_lock, flags); + + list_del_init(&ctx->list); + if (upriv->udev) { + spin_unlock_irqrestore(&upriv->req_lock, flags); + ezusb_req_queue_run(upriv); + spin_lock_irqsave(&upriv->req_lock, flags); + } + + switch (ctx->state) { + case EZUSB_CTX_COMPLETE: + case EZUSB_CTX_REQSUBMIT_FAIL: + case EZUSB_CTX_REQ_FAILED: + case EZUSB_CTX_REQ_TIMEOUT: + case EZUSB_CTX_RESP_TIMEOUT: + spin_unlock_irqrestore(&upriv->req_lock, flags); + + if ((ctx->out_rid == EZUSB_RID_TX) && upriv->dev) { + struct net_device *dev = upriv->dev; + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + + if (ctx->state != EZUSB_CTX_COMPLETE) + stats->tx_errors++; + else + stats->tx_packets++; + + netif_wake_queue(dev); + } + ezusb_complete_all(&ctx->done); + ezusb_request_context_put(ctx); + break; + + default: + spin_unlock_irqrestore(&upriv->req_lock, flags); + if (!upriv->udev) { + /* This is normal, as all request contexts get flushed + * when the device is disconnected */ + err("Called, CTX not terminating, but device gone"); + ezusb_complete_all(&ctx->done); + ezusb_request_context_put(ctx); + break; + } + + err("Called, CTX not in terminating state."); + /* Things are really bad if this happens. Just leak + * the CTX because it may still be linked to the + * queue or the OUT urb may still be active. + * Just leaking at least prevents an Oops or Panic. + */ + break; + } +} + +/** + * ezusb_req_queue_run: + * Description: + * Note: Only one active CTX at any one time, because there's no + * other (reliable) way to match the response URB to the correct + * CTX. + **/ +static void ezusb_req_queue_run(struct ezusb_priv *upriv) +{ + unsigned long flags; + struct request_context *ctx; + int result; + + spin_lock_irqsave(&upriv->req_lock, flags); + + if (!list_empty(&upriv->req_active)) + goto unlock; + + if (list_empty(&upriv->req_pending)) + goto unlock; + + ctx = + list_entry(upriv->req_pending.next, struct request_context, + list); + + if (!ctx->upriv->udev) + goto unlock; + + /* We need to split this off to avoid a race condition */ + list_move_tail(&ctx->list, &upriv->req_active); + + if (ctx->state == EZUSB_CTX_QUEUED) { + atomic_inc(&ctx->refcount); + result = usb_submit_urb(ctx->outurb, GFP_ATOMIC); + if (result) { + ctx->state = EZUSB_CTX_REQSUBMIT_FAIL; + + spin_unlock_irqrestore(&upriv->req_lock, flags); + + err("Fatal, failed to submit command urb." + " error=%d\n", result); + + ezusb_ctx_complete(ctx); + ezusb_request_context_put(ctx); + goto done; + } + + ctx->state = EZUSB_CTX_REQ_SUBMITTED; + ezusb_mod_timer(ctx->upriv, &ctx->timer, + jiffies + DEF_TIMEOUT); + } + + unlock: + spin_unlock_irqrestore(&upriv->req_lock, flags); + + done: + return; +} + +static void ezusb_req_enqueue_run(struct ezusb_priv *upriv, + struct request_context *ctx) +{ + unsigned long flags; + + spin_lock_irqsave(&upriv->req_lock, flags); + + if (!ctx->upriv->udev) { + spin_unlock_irqrestore(&upriv->req_lock, flags); + goto done; + } + atomic_inc(&ctx->refcount); + list_add_tail(&ctx->list, &upriv->req_pending); + spin_unlock_irqrestore(&upriv->req_lock, flags); + + ctx->state = EZUSB_CTX_QUEUED; + ezusb_req_queue_run(upriv); + + done: + return; +} + +static void ezusb_request_out_callback(struct urb *urb) +{ + unsigned long flags; + enum ezusb_state state; + struct request_context *ctx = urb->context; + struct ezusb_priv *upriv = ctx->upriv; + + spin_lock_irqsave(&upriv->req_lock, flags); + + del_timer(&ctx->timer); + + if (ctx->killed) { + spin_unlock_irqrestore(&upriv->req_lock, flags); + pr_warning("interrupt called with dead ctx"); + goto out; + } + + state = ctx->state; + + if (urb->status == 0) { + switch (state) { + case EZUSB_CTX_REQ_SUBMITTED: + if (ctx->in_rid) { + ctx->state = EZUSB_CTX_REQ_COMPLETE; + /* reply URB still pending */ + ezusb_mod_timer(upriv, &ctx->timer, + jiffies + DEF_TIMEOUT); + spin_unlock_irqrestore(&upriv->req_lock, + flags); + break; + } + /* fall through */ + case EZUSB_CTX_RESP_RECEIVED: + /* IN already received before this OUT-ACK */ + ctx->state = EZUSB_CTX_COMPLETE; + spin_unlock_irqrestore(&upriv->req_lock, flags); + ezusb_ctx_complete(ctx); + break; + + default: + spin_unlock_irqrestore(&upriv->req_lock, flags); + err("Unexpected state(0x%x, %d) in OUT URB", + state, urb->status); + break; + } + } else { + /* If someone cancels the OUT URB then its status + * should be either -ECONNRESET or -ENOENT. + */ + switch (state) { + case EZUSB_CTX_REQ_SUBMITTED: + case EZUSB_CTX_RESP_RECEIVED: + ctx->state = EZUSB_CTX_REQ_FAILED; + /* fall through */ + + case EZUSB_CTX_REQ_FAILED: + case EZUSB_CTX_REQ_TIMEOUT: + spin_unlock_irqrestore(&upriv->req_lock, flags); + + ezusb_ctx_complete(ctx); + break; + + default: + spin_unlock_irqrestore(&upriv->req_lock, flags); + + err("Unexpected state(0x%x, %d) in OUT URB", + state, urb->status); + break; + } + } + out: + ezusb_request_context_put(ctx); +} + +static void ezusb_request_in_callback(struct ezusb_priv *upriv, + struct urb *urb) +{ + struct ezusb_packet *ans = urb->transfer_buffer; + struct request_context *ctx = NULL; + enum ezusb_state state; + unsigned long flags; + + /* Find the CTX on the active queue that requested this URB */ + spin_lock_irqsave(&upriv->req_lock, flags); + if (upriv->udev) { + struct list_head *item; + + list_for_each(item, &upriv->req_active) { + struct request_context *c; + int reply_count; + + c = list_entry(item, struct request_context, list); + reply_count = + ezusb_reply_inc(c->buf->req_reply_count); + if ((ans->ans_reply_count == reply_count) + && (le16_to_cpu(ans->hermes_rid) == c->in_rid)) { + ctx = c; + break; + } + dbg("Skipped (0x%x/0x%x) (%d/%d)", + le16_to_cpu(ans->hermes_rid), + c->in_rid, ans->ans_reply_count, reply_count); + } + } + + if (ctx == NULL) { + spin_unlock_irqrestore(&upriv->req_lock, flags); + err("%s: got unexpected RID: 0x%04X", __func__, + le16_to_cpu(ans->hermes_rid)); + ezusb_req_queue_run(upriv); + return; + } + + /* The data we want is in the in buffer, exchange */ + urb->transfer_buffer = ctx->buf; + ctx->buf = (void *) ans; + ctx->buf_length = urb->actual_length; + + state = ctx->state; + switch (state) { + case EZUSB_CTX_REQ_SUBMITTED: + /* We have received our response URB before + * our request has been acknowledged. Do NOT + * destroy our CTX yet, because our OUT URB + * is still alive ... + */ + ctx->state = EZUSB_CTX_RESP_RECEIVED; + spin_unlock_irqrestore(&upriv->req_lock, flags); + + /* Let the machine continue running. */ + break; + + case EZUSB_CTX_REQ_COMPLETE: + /* This is the usual path: our request + * has already been acknowledged, and + * we have now received the reply. + */ + ctx->state = EZUSB_CTX_COMPLETE; + + /* Stop the intimer */ + del_timer(&ctx->timer); + spin_unlock_irqrestore(&upriv->req_lock, flags); + + /* Call the completion handler */ + ezusb_ctx_complete(ctx); + break; + + default: + spin_unlock_irqrestore(&upriv->req_lock, flags); + + pr_warning("Matched IN URB, unexpected context state(0x%x)", + state); + /* Throw this CTX away and try submitting another */ + del_timer(&ctx->timer); + ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK; + usb_unlink_urb(ctx->outurb); + ezusb_req_queue_run(upriv); + break; + } /* switch */ +} + + +static void ezusb_req_ctx_wait(struct ezusb_priv *upriv, + struct request_context *ctx) +{ + switch (ctx->state) { + case EZUSB_CTX_QUEUED: + case EZUSB_CTX_REQ_SUBMITTED: + case EZUSB_CTX_REQ_COMPLETE: + case EZUSB_CTX_RESP_RECEIVED: + if (in_atomic()) { + /* If we get called from a timer, timeout timers don't + * get the chance to run themselves. So we make sure + * that we don't sleep for ever */ + int msecs = DEF_TIMEOUT * (1000 / HZ); + while (!ctx->done.done && msecs--) + udelay(1000); + } else { + wait_event_interruptible(ctx->done.wait, + ctx->done.done); + } + break; + default: + /* Done or failed - nothing to wait for */ + break; + } +} + +static inline u16 build_crc(struct ezusb_packet *data) +{ + u16 crc = 0; + u8 *bytes = (u8 *)data; + int i; + + for (i = 0; i < 8; i++) + crc = (crc << 1) + bytes[i]; + + return crc; +} + +/** + * ezusb_fill_req: + * + * if data == NULL and length > 0 the data is assumed to be already in + * the target buffer and only the header is filled. + * + */ +static int ezusb_fill_req(struct ezusb_packet *req, u16 length, u16 rid, + const void *data, u16 frame_type, u8 reply_count) +{ + int total_size = sizeof(*req) + length; + + BUG_ON(total_size > BULK_BUF_SIZE); + + req->magic = cpu_to_le16(EZUSB_MAGIC); + req->req_reply_count = reply_count; + req->ans_reply_count = 0; + req->frame_type = cpu_to_le16(frame_type); + req->size = cpu_to_le16(length + 4); + req->crc = cpu_to_le16(build_crc(req)); + req->hermes_len = cpu_to_le16(HERMES_BYTES_TO_RECLEN(length)); + req->hermes_rid = cpu_to_le16(rid); + if (data) + memcpy(req->data, data, length); + return total_size; +} + +static int ezusb_submit_in_urb(struct ezusb_priv *upriv) +{ + int retval = 0; + void *cur_buf = upriv->read_urb->transfer_buffer; + + if (upriv->read_urb->status == -EINPROGRESS) { + dbg("urb busy, not resubmiting"); + retval = -EBUSY; + goto exit; + } + usb_fill_bulk_urb(upriv->read_urb, upriv->udev, upriv->read_pipe, + cur_buf, BULK_BUF_SIZE, + ezusb_bulk_in_callback, upriv); + upriv->read_urb->transfer_flags = 0; + retval = usb_submit_urb(upriv->read_urb, GFP_ATOMIC); + if (retval) + err("%s submit failed %d", __func__, retval); + + exit: + return retval; +} + +static inline int ezusb_8051_cpucs(struct ezusb_priv *upriv, int reset) +{ + u8 res_val = reset; /* avoid argument promotion */ + + if (!upriv->udev) { + err("%s: !upriv->udev", __func__); + return -EFAULT; + } + return usb_control_msg(upriv->udev, + usb_sndctrlpipe(upriv->udev, 0), + EZUSB_REQUEST_FW_TRANS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | + USB_DIR_OUT, EZUSB_CPUCS_REG, 0, &res_val, + sizeof(res_val), DEF_TIMEOUT); +} + +static int ezusb_firmware_download(struct ezusb_priv *upriv, + struct ez_usb_fw *fw) +{ + u8 fw_buffer[FW_BUF_SIZE]; + int retval, addr; + int variant_offset; + + /* + * This byte is 1 and should be replaced with 0. The offset is + * 0x10AD in version 0.0.6. The byte in question should follow + * the end of the code pointed to by the jump in the beginning + * of the firmware. Also, it is read by code located at 0x358. + */ + variant_offset = be16_to_cpup((__be16 *) &fw->code[FW_VAR_OFFSET_PTR]); + if (variant_offset >= fw->size) { + printk(KERN_ERR PFX "Invalid firmware variant offset: " + "0x%04x\n", variant_offset); + retval = -EINVAL; + goto fail; + } + + retval = ezusb_8051_cpucs(upriv, 1); + if (retval < 0) + goto fail; + for (addr = 0; addr < fw->size; addr += FW_BUF_SIZE) { + /* 0x100-0x300 should be left alone, it contains card + * specific data, like USB enumeration information */ + if ((addr >= FW_HOLE_START) && (addr < FW_HOLE_END)) + continue; + + memcpy(fw_buffer, &fw->code[addr], FW_BUF_SIZE); + if (variant_offset >= addr && + variant_offset < addr + FW_BUF_SIZE) { + dbg("Patching card_variant byte at 0x%04X", + variant_offset); + fw_buffer[variant_offset - addr] = FW_VAR_VALUE; + } + retval = usb_control_msg(upriv->udev, + usb_sndctrlpipe(upriv->udev, 0), + EZUSB_REQUEST_FW_TRANS, + USB_TYPE_VENDOR | USB_RECIP_DEVICE + | USB_DIR_OUT, + addr, 0x0, + fw_buffer, FW_BUF_SIZE, + DEF_TIMEOUT); + + if (retval < 0) + goto fail; + } + retval = ezusb_8051_cpucs(upriv, 0); + if (retval < 0) + goto fail; + + goto exit; + fail: + printk(KERN_ERR PFX "Firmware download failed, error %d\n", + retval); + exit: + return retval; +} + +static int ezusb_access_ltv(struct ezusb_priv *upriv, + struct request_context *ctx, + u16 length, const void *data, u16 frame_type, + void *ans_buff, int ans_size, u16 *ans_length) +{ + int req_size; + int retval = 0; + enum ezusb_state state; + + BUG_ON(in_irq()); + + if (!upriv->udev) { + dbg("Device disconnected"); + return -ENODEV; + } + + if (upriv->read_urb->status != -EINPROGRESS) + err("%s: in urb not pending", __func__); + + /* protect upriv->reply_count, guarantee sequential numbers */ + spin_lock_bh(&upriv->reply_count_lock); + req_size = ezusb_fill_req(ctx->buf, length, ctx->out_rid, data, + frame_type, upriv->reply_count); + usb_fill_bulk_urb(ctx->outurb, upriv->udev, upriv->write_pipe, + ctx->buf, req_size, + ezusb_request_out_callback, ctx); + + if (ctx->in_rid) + upriv->reply_count = ezusb_reply_inc(upriv->reply_count); + + ezusb_req_enqueue_run(upriv, ctx); + + spin_unlock_bh(&upriv->reply_count_lock); + + if (ctx->in_rid) + ezusb_req_ctx_wait(upriv, ctx); + + state = ctx->state; + switch (state) { + case EZUSB_CTX_COMPLETE: + retval = ctx->outurb->status; + break; + + case EZUSB_CTX_QUEUED: + case EZUSB_CTX_REQ_SUBMITTED: + if (!ctx->in_rid) + break; + default: + err("%s: Unexpected context state %d", __func__, + state); + /* fall though */ + case EZUSB_CTX_REQ_TIMEOUT: + case EZUSB_CTX_REQ_FAILED: + case EZUSB_CTX_RESP_TIMEOUT: + case EZUSB_CTX_REQSUBMIT_FAIL: + printk(KERN_ERR PFX "Access failed, resetting (state %d," + " reply_count %d)\n", state, upriv->reply_count); + upriv->reply_count = 0; + if (state == EZUSB_CTX_REQ_TIMEOUT + || state == EZUSB_CTX_RESP_TIMEOUT) { + printk(KERN_ERR PFX "ctx timed out\n"); + retval = -ETIMEDOUT; + } else { + printk(KERN_ERR PFX "ctx failed\n"); + retval = -EFAULT; + } + goto exit; + break; + } + if (ctx->in_rid) { + struct ezusb_packet *ans = ctx->buf; + int exp_len; + + if (ans->hermes_len != 0) + exp_len = le16_to_cpu(ans->hermes_len) * 2 + 12; + else + exp_len = 14; + + if (exp_len != ctx->buf_length) { + err("%s: length mismatch for RID 0x%04x: " + "expected %d, got %d", __func__, + ctx->in_rid, exp_len, ctx->buf_length); + retval = -EIO; + goto exit; + } + + if (ans_buff) + memcpy(ans_buff, ans->data, + min_t(int, exp_len, ans_size)); + if (ans_length) + *ans_length = le16_to_cpu(ans->hermes_len); + } + exit: + ezusb_request_context_put(ctx); + return retval; +} + +static int ezusb_write_ltv(hermes_t *hw, int bap, u16 rid, + u16 length, const void *data) +{ + struct ezusb_priv *upriv = hw->priv; + u16 frame_type; + struct request_context *ctx; + + if (length == 0) + return -EINVAL; + + length = HERMES_RECLEN_TO_BYTES(length); + + /* On memory mapped devices HERMES_RID_CNFGROUPADDRESSES can be + * set to be empty, but the USB bridge doesn't like it */ + if (length == 0) + return 0; + + ctx = ezusb_alloc_ctx(upriv, rid, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + if (rid == EZUSB_RID_TX) + frame_type = EZUSB_FRAME_DATA; + else + frame_type = EZUSB_FRAME_CONTROL; + + return ezusb_access_ltv(upriv, ctx, length, data, frame_type, + NULL, 0, NULL); +} + +static int ezusb_read_ltv(hermes_t *hw, int bap, u16 rid, + unsigned bufsize, u16 *length, void *buf) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + + if ((bufsize < 0) || (bufsize % 2)) + return -EINVAL; + + ctx = ezusb_alloc_ctx(upriv, rid, rid); + if (!ctx) + return -ENOMEM; + + return ezusb_access_ltv(upriv, ctx, 0, NULL, EZUSB_FRAME_CONTROL, + buf, bufsize, length); +} + +static int ezusb_doicmd_wait(hermes_t *hw, u16 cmd, u16 parm0, u16 parm1, + u16 parm2, struct hermes_response *resp) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + + __le16 data[4] = { + cpu_to_le16(cmd), + cpu_to_le16(parm0), + cpu_to_le16(parm1), + cpu_to_le16(parm2), + }; + dbg("0x%04X, parm0 0x%04X, parm1 0x%04X, parm2 0x%04X", + cmd, parm0, parm1, parm2); + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_DOCMD, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + return ezusb_access_ltv(upriv, ctx, sizeof(data), &data, + EZUSB_FRAME_CONTROL, NULL, 0, NULL); +} + +static int ezusb_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0, + struct hermes_response *resp) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + + __le16 data[4] = { + cpu_to_le16(cmd), + cpu_to_le16(parm0), + 0, + 0, + }; + dbg("0x%04X, parm0 0x%04X", cmd, parm0); + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_DOCMD, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + return ezusb_access_ltv(upriv, ctx, sizeof(data), &data, + EZUSB_FRAME_CONTROL, NULL, 0, NULL); +} + +static int ezusb_bap_pread(struct hermes *hw, int bap, + void *buf, int len, u16 id, u16 offset) +{ + struct ezusb_priv *upriv = hw->priv; + struct ezusb_packet *ans = (void *) upriv->read_urb->transfer_buffer; + int actual_length = upriv->read_urb->actual_length; + + if (id == EZUSB_RID_RX) { + if ((sizeof(*ans) + offset + len) > actual_length) { + printk(KERN_ERR PFX "BAP read beyond buffer end " + "in rx frame\n"); + return -EINVAL; + } + memcpy(buf, ans->data + offset, len); + return 0; + } + + if (EZUSB_IS_INFO(id)) { + /* Include 4 bytes for length/type */ + if ((sizeof(*ans) + offset + len - 4) > actual_length) { + printk(KERN_ERR PFX "BAP read beyond buffer end " + "in info frame\n"); + return -EFAULT; + } + memcpy(buf, ans->data + offset - 4, len); + } else { + printk(KERN_ERR PFX "Unexpected fid 0x%04x\n", id); + return -EINVAL; + } + + return 0; +} + +static netdev_tx_t ezusb_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct orinoco_private *priv = ndev_priv(dev); + struct net_device_stats *stats = &priv->stats; + struct ezusb_priv *upriv = priv->card; + int err = 0; + char *p; + struct ethhdr *eh; + int len, data_len, data_off; + __le16 tx_control; + unsigned long flags; + struct request_context *ctx; + u8 *buf; + int tx_size; + + if (!netif_running(dev)) { + printk(KERN_ERR "%s: Tx on stopped device!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (netif_queue_stopped(dev)) { + printk(KERN_DEBUG "%s: Tx while transmitter busy!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (orinoco_lock(priv, &flags) != 0) { + printk(KERN_ERR + "%s: orinoco_xmit() called while hw_unavailable\n", + dev->name); + return NETDEV_TX_BUSY; + } + + if (!netif_carrier_ok(dev) || + (priv->iw_mode == NL80211_IFTYPE_MONITOR)) { + /* Oops, the firmware hasn't established a connection, + silently drop the packet (this seems to be the + safest approach). */ + stats->tx_errors++; + orinoco_unlock(priv, &flags); + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_TX, 0); + if (!ctx) + goto fail; + + memset(ctx->buf, 0, BULK_BUF_SIZE); + buf = ctx->buf->data; + + /* Length of the packet body */ + /* FIXME: what if the skb is smaller than this? */ + len = max_t(int, skb->len - ETH_HLEN, ETH_ZLEN - ETH_HLEN); + + eh = (struct ethhdr *) skb->data; + + tx_control = cpu_to_le16(0); + memcpy(buf, &tx_control, sizeof(tx_control)); + buf += sizeof(tx_control); + /* Encapsulate Ethernet-II frames */ + if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */ + struct header_struct *hdr = (void *) buf; + buf += sizeof(*hdr); + data_len = len; + data_off = sizeof(tx_control) + sizeof(*hdr); + p = skb->data + ETH_HLEN; + + /* 802.3 header */ + memcpy(hdr->dest, eh->h_dest, ETH_ALEN); + memcpy(hdr->src, eh->h_source, ETH_ALEN); + hdr->len = htons(data_len + ENCAPS_OVERHEAD); + + /* 802.2 header */ + memcpy(&hdr->dsap, &encaps_hdr, sizeof(encaps_hdr)); + + hdr->ethertype = eh->h_proto; + } else { /* IEEE 802.3 frame */ + data_len = len + ETH_HLEN; + data_off = sizeof(tx_control); + p = skb->data; + } + + memcpy(buf, p, data_len); + buf += data_len; + + /* Finally, we actually initiate the send */ + netif_stop_queue(dev); + + /* The card may behave better if we send evenly sized usb transfers */ + tx_size = ALIGN(buf - ctx->buf->data, 2); + + err = ezusb_access_ltv(upriv, ctx, tx_size, NULL, + EZUSB_FRAME_DATA, NULL, 0, NULL); + + if (err) { + netif_start_queue(dev); + if (net_ratelimit()) + printk(KERN_ERR "%s: Error %d transmitting packet\n", + dev->name, err); + stats->tx_errors++; + goto fail; + } + + dev->trans_start = jiffies; + stats->tx_bytes += data_off + data_len; + + orinoco_unlock(priv, &flags); + + dev_kfree_skb(skb); + + return NETDEV_TX_OK; + + fail: + orinoco_unlock(priv, &flags); + return NETDEV_TX_BUSY; +} + +static int ezusb_allocate(struct hermes *hw, u16 size, u16 *fid) +{ + *fid = EZUSB_RID_TX; + return 0; +} + + +static int ezusb_hard_reset(struct orinoco_private *priv) +{ + struct ezusb_priv *upriv = priv->card; + int retval = ezusb_8051_cpucs(upriv, 1); + + if (retval < 0) { + err("Failed to reset"); + return retval; + } + + retval = ezusb_8051_cpucs(upriv, 0); + if (retval < 0) { + err("Failed to unreset"); + return retval; + } + + dbg("sending control message"); + retval = usb_control_msg(upriv->udev, + usb_sndctrlpipe(upriv->udev, 0), + EZUSB_REQUEST_TRIGER, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | + USB_DIR_OUT, 0x0, 0x0, NULL, 0, + DEF_TIMEOUT); + if (retval < 0) { + err("EZUSB_REQUEST_TRIGER failed retval %d", retval); + return retval; + } +#if 0 + dbg("Sending EZUSB_REQUEST_TRIG_AC"); + retval = usb_control_msg(upriv->udev, + usb_sndctrlpipe(upriv->udev, 0), + EZUSB_REQUEST_TRIG_AC, + USB_TYPE_VENDOR | USB_RECIP_DEVICE | + USB_DIR_OUT, 0x00FA, 0x0, NULL, 0, + DEF_TIMEOUT); + if (retval < 0) { + err("EZUSB_REQUEST_TRIG_AC failed retval %d", retval); + return retval; + } +#endif + + return 0; +} + + +static int ezusb_init(hermes_t *hw) +{ + struct ezusb_priv *upriv = hw->priv; + int retval; + + BUG_ON(in_interrupt()); + BUG_ON(!upriv); + + upriv->reply_count = 0; + /* Write the MAGIC number on the simulated registers to keep + * orinoco.c happy */ + hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC); + hermes_write_regn(hw, RXFID, EZUSB_RID_RX); + + usb_kill_urb(upriv->read_urb); + ezusb_submit_in_urb(upriv); + + retval = ezusb_write_ltv(hw, 0, EZUSB_RID_INIT1, + HERMES_BYTES_TO_RECLEN(2), "\x10\x00"); + if (retval < 0) { + printk(KERN_ERR PFX "EZUSB_RID_INIT1 error %d\n", retval); + return retval; + } + + retval = ezusb_docmd_wait(hw, HERMES_CMD_INIT, 0, NULL); + if (retval < 0) { + printk(KERN_ERR PFX "HERMES_CMD_INIT error %d\n", retval); + return retval; + } + + return 0; +} + +static void ezusb_bulk_in_callback(struct urb *urb) +{ + struct ezusb_priv *upriv = (struct ezusb_priv *) urb->context; + struct ezusb_packet *ans = urb->transfer_buffer; + u16 crc; + u16 hermes_rid; + + if (upriv->udev == NULL) { + dbg("disconnected"); + return; + } + + if (urb->status == -ETIMEDOUT) { + /* When a device gets unplugged we get this every time + * we resubmit, flooding the logs. Since we don't use + * USB timeouts, it shouldn't happen any other time*/ + pr_warning("%s: urb timed out, not resubmiting", __func__); + return; + } + if (urb->status == -ECONNABORTED) { + pr_warning("%s: connection abort, resubmiting urb", + __func__); + goto resubmit; + } + if ((urb->status == -EILSEQ) + || (urb->status == -ENOENT) + || (urb->status == -ECONNRESET)) { + dbg("status %d, not resubmiting", urb->status); + return; + } + if (urb->status) + dbg("status: %d length: %d", + urb->status, urb->actual_length); + if (urb->actual_length < sizeof(*ans)) { + err("%s: short read, ignoring", __func__); + goto resubmit; + } + crc = build_crc(ans); + if (le16_to_cpu(ans->crc) != crc) { + err("CRC error, ignoring packet"); + goto resubmit; + } + + hermes_rid = le16_to_cpu(ans->hermes_rid); + if ((hermes_rid != EZUSB_RID_RX) && !EZUSB_IS_INFO(hermes_rid)) { + ezusb_request_in_callback(upriv, urb); + } else if (upriv->dev) { + struct net_device *dev = upriv->dev; + struct orinoco_private *priv = ndev_priv(dev); + hermes_t *hw = &priv->hw; + + if (hermes_rid == EZUSB_RID_RX) { + __orinoco_ev_rx(dev, hw); + } else { + hermes_write_regn(hw, INFOFID, + le16_to_cpu(ans->hermes_rid)); + __orinoco_ev_info(dev, hw); + } + } + + resubmit: + if (upriv->udev) + ezusb_submit_in_urb(upriv); +} + +static inline void ezusb_delete(struct ezusb_priv *upriv) +{ + struct net_device *dev; + struct list_head *item; + struct list_head *tmp_item; + unsigned long flags; + + BUG_ON(in_interrupt()); + BUG_ON(!upriv); + + dev = upriv->dev; + mutex_lock(&upriv->mtx); + + upriv->udev = NULL; /* No timer will be rearmed from here */ + + usb_kill_urb(upriv->read_urb); + + spin_lock_irqsave(&upriv->req_lock, flags); + list_for_each_safe(item, tmp_item, &upriv->req_active) { + struct request_context *ctx; + int err; + + ctx = list_entry(item, struct request_context, list); + atomic_inc(&ctx->refcount); + + ctx->outurb->transfer_flags |= URB_ASYNC_UNLINK; + err = usb_unlink_urb(ctx->outurb); + + spin_unlock_irqrestore(&upriv->req_lock, flags); + if (err == -EINPROGRESS) + wait_for_completion(&ctx->done); + + del_timer_sync(&ctx->timer); + /* FIXME: there is an slight chance for the irq handler to + * be running */ + if (!list_empty(&ctx->list)) + ezusb_ctx_complete(ctx); + + ezusb_request_context_put(ctx); + spin_lock_irqsave(&upriv->req_lock, flags); + } + spin_unlock_irqrestore(&upriv->req_lock, flags); + + list_for_each_safe(item, tmp_item, &upriv->req_pending) + ezusb_ctx_complete(list_entry(item, + struct request_context, list)); + + if (upriv->read_urb->status == -EINPROGRESS) + printk(KERN_ERR PFX "Some URB in progress\n"); + + mutex_unlock(&upriv->mtx); + + kfree(upriv->read_urb->transfer_buffer); + if (upriv->bap_buf != NULL) + kfree(upriv->bap_buf); + if (upriv->read_urb != NULL) + usb_free_urb(upriv->read_urb); + if (upriv->dev) { + struct orinoco_private *priv = ndev_priv(upriv->dev); + orinoco_if_del(priv); + free_orinocodev(priv); + } +} + +static void ezusb_lock_irqsave(spinlock_t *lock, + unsigned long *flags) __acquires(lock) +{ + spin_lock_bh(lock); +} + +static void ezusb_unlock_irqrestore(spinlock_t *lock, + unsigned long *flags) __releases(lock) +{ + spin_unlock_bh(lock); +} + +static void ezusb_lock_irq(spinlock_t *lock) __acquires(lock) +{ + spin_lock_bh(lock); +} + +static void ezusb_unlock_irq(spinlock_t *lock) __releases(lock) +{ + spin_unlock_bh(lock); +} + +static const struct hermes_ops ezusb_ops = { + .init = ezusb_init, + .cmd_wait = ezusb_docmd_wait, + .init_cmd_wait = ezusb_doicmd_wait, + .allocate = ezusb_allocate, + .read_ltv = ezusb_read_ltv, + .write_ltv = ezusb_write_ltv, + .bap_pread = ezusb_bap_pread, + .lock_irqsave = ezusb_lock_irqsave, + .unlock_irqrestore = ezusb_unlock_irqrestore, + .lock_irq = ezusb_lock_irq, + .unlock_irq = ezusb_unlock_irq, +}; + +static const struct net_device_ops ezusb_netdev_ops = { + .ndo_open = orinoco_open, + .ndo_stop = orinoco_stop, + .ndo_start_xmit = ezusb_xmit, + .ndo_set_multicast_list = orinoco_set_multicast_list, + .ndo_change_mtu = orinoco_change_mtu, + .ndo_set_mac_address = eth_mac_addr, + .ndo_validate_addr = eth_validate_addr, + .ndo_tx_timeout = orinoco_tx_timeout, + .ndo_get_stats = orinoco_get_stats, +}; + +static int ezusb_probe(struct usb_interface *interface, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(interface); + struct orinoco_private *priv; + hermes_t *hw; + struct ezusb_priv *upriv = NULL; + struct usb_interface_descriptor *iface_desc; + struct usb_endpoint_descriptor *ep; + const struct firmware *fw_entry; + int retval = 0; + int i; + + priv = alloc_orinocodev(sizeof(*upriv), &udev->dev, + ezusb_hard_reset, NULL); + if (!priv) { + err("Couldn't allocate orinocodev"); + goto exit; + } + + hw = &priv->hw; + + upriv = priv->card; + + mutex_init(&upriv->mtx); + spin_lock_init(&upriv->reply_count_lock); + + spin_lock_init(&upriv->req_lock); + INIT_LIST_HEAD(&upriv->req_pending); + INIT_LIST_HEAD(&upriv->req_active); + + upriv->udev = udev; + + hw->iobase = (void __force __iomem *) &upriv->hermes_reg_fake; + hw->reg_spacing = HERMES_16BIT_REGSPACING; + hw->priv = upriv; + hw->ops = &ezusb_ops; + + /* set up the endpoint information */ + /* check out the endpoints */ + + iface_desc = &interface->altsetting[0].desc; + for (i = 0; i < iface_desc->bNumEndpoints; ++i) { + ep = &interface->altsetting[0].endpoint[i].desc; + + if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) + == USB_DIR_IN) && + ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_BULK)) { + /* we found a bulk in endpoint */ + if (upriv->read_urb != NULL) { + pr_warning("Found a second bulk in ep, ignored"); + continue; + } + + upriv->read_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!upriv->read_urb) { + err("No free urbs available"); + goto error; + } + if (le16_to_cpu(ep->wMaxPacketSize) != 64) + pr_warning("bulk in: wMaxPacketSize!= 64"); + if (ep->bEndpointAddress != (2 | USB_DIR_IN)) + pr_warning("bulk in: bEndpointAddress: %d", + ep->bEndpointAddress); + upriv->read_pipe = usb_rcvbulkpipe(udev, + ep-> + bEndpointAddress); + upriv->read_urb->transfer_buffer = + kmalloc(BULK_BUF_SIZE, GFP_KERNEL); + if (!upriv->read_urb->transfer_buffer) { + err("Couldn't allocate IN buffer"); + goto error; + } + } + + if (((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) + == USB_DIR_OUT) && + ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_BULK)) { + /* we found a bulk out endpoint */ + if (upriv->bap_buf != NULL) { + pr_warning("Found a second bulk out ep, ignored"); + continue; + } + + if (le16_to_cpu(ep->wMaxPacketSize) != 64) + pr_warning("bulk out: wMaxPacketSize != 64"); + if (ep->bEndpointAddress != 2) + pr_warning("bulk out: bEndpointAddress: %d", + ep->bEndpointAddress); + upriv->write_pipe = usb_sndbulkpipe(udev, + ep-> + bEndpointAddress); + upriv->bap_buf = kmalloc(BULK_BUF_SIZE, GFP_KERNEL); + if (!upriv->bap_buf) { + err("Couldn't allocate bulk_out_buffer"); + goto error; + } + } + } + if (!upriv->bap_buf || !upriv->read_urb) { + err("Didn't find the required bulk endpoints"); + goto error; + } + + if (request_firmware(&fw_entry, "orinoco_ezusb_fw", + &interface->dev) == 0) { + firmware.size = fw_entry->size; + firmware.code = fw_entry->data; + } + if (firmware.size && firmware.code) { + ezusb_firmware_download(upriv, &firmware); + } else { + err("No firmware to download"); + goto error; + } + + if (ezusb_hard_reset(priv) < 0) { + err("Cannot reset the device"); + goto error; + } + + /* If the firmware is already downloaded orinoco.c will call + * ezusb_init but if the firmware is not already there, that will make + * the kernel very unstable, so we try initializing here and quit in + * case of error */ + if (ezusb_init(hw) < 0) { + err("Couldn't initialize the device"); + err("Firmware may not be downloaded or may be wrong."); + goto error; + } + + /* Initialise the main driver */ + if (orinoco_init(priv) != 0) { + err("orinoco_init() failed\n"); + goto error; + } + + if (orinoco_if_add(priv, 0, 0, &ezusb_netdev_ops) != 0) { + upriv->dev = NULL; + err("%s: orinoco_if_add() failed", __func__); + goto error; + } + upriv->dev = priv->ndev; + + goto exit; + + error: + ezusb_delete(upriv); + if (upriv->dev) { + /* upriv->dev was 0, so ezusb_delete() didn't free it */ + free_orinocodev(priv); + } + upriv = NULL; + retval = -EFAULT; + exit: + if (fw_entry) { + firmware.code = NULL; + firmware.size = 0; + release_firmware(fw_entry); + } + usb_set_intfdata(interface, upriv); + return retval; +} + + +static void ezusb_disconnect(struct usb_interface *intf) +{ + struct ezusb_priv *upriv = usb_get_intfdata(intf); + usb_set_intfdata(intf, NULL); + ezusb_delete(upriv); + printk(KERN_INFO PFX "Disconnected\n"); +} + + +/* usb specific object needed to register this driver with the usb subsystem */ +static struct usb_driver orinoco_driver = { + .name = DRIVER_NAME, + .probe = ezusb_probe, + .disconnect = ezusb_disconnect, + .id_table = ezusb_table, +}; + +/* Can't be declared "const" or the whole __initdata section will + * become const */ +static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION + " (Manuel Estrada Sainz)"; + +static int __init ezusb_module_init(void) +{ + int err; + + printk(KERN_DEBUG "%s\n", version); + + /* register this driver with the USB subsystem */ + err = usb_register(&orinoco_driver); + if (err < 0) { + printk(KERN_ERR PFX "usb_register failed, error %d\n", + err); + return err; + } + + return 0; +} + +static void __exit ezusb_module_exit(void) +{ + /* deregister this driver with the USB subsystem */ + usb_deregister(&orinoco_driver); +} + + +module_init(ezusb_module_init); +module_exit(ezusb_module_exit); + +MODULE_AUTHOR("Manuel Estrada Sainz"); +MODULE_DESCRIPTION + ("Driver for Orinoco wireless LAN cards using EZUSB bridge"); +MODULE_LICENSE("Dual MPL/GPL"); From fc97431a50962e66c052ec6909d4b2582efd3554 Mon Sep 17 00:00:00 2001 From: David Kilroy Date: Sat, 1 May 2010 14:05:42 +0100 Subject: [PATCH 095/109] orinoco_usb: avoid in_atomic We expect to be either in process contect or soft interrupt context. So use in_softirq instead. Signed-off-by: David Kilroy Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/orinoco_usb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/orinoco/orinoco_usb.c b/drivers/net/wireless/orinoco/orinoco_usb.c index ce0069de5c46..8e1b31cbd375 100644 --- a/drivers/net/wireless/orinoco/orinoco_usb.c +++ b/drivers/net/wireless/orinoco/orinoco_usb.c @@ -701,7 +701,7 @@ static void ezusb_req_ctx_wait(struct ezusb_priv *upriv, case EZUSB_CTX_REQ_SUBMITTED: case EZUSB_CTX_REQ_COMPLETE: case EZUSB_CTX_RESP_RECEIVED: - if (in_atomic()) { + if (in_softirq()) { /* If we get called from a timer, timeout timers don't * get the chance to run themselves. So we make sure * that we don't sleep for ever */ From 07cefe7ac983374ee4c369f1d4aee3093bf3b44f Mon Sep 17 00:00:00 2001 From: David Kilroy Date: Sat, 1 May 2010 14:05:43 +0100 Subject: [PATCH 096/109] orinoco_usb: implement fw download This involves some refactorring of the common fw download code to substitute ezusb versions of various functions. Note that WPA-enabled firmwares (9.xx series) will not work fully with orinoco_usb yet. Signed-off-by: David Kilroy Signed-off-by: John W. Linville --- drivers/net/wireless/orinoco/fw.c | 8 +- drivers/net/wireless/orinoco/hermes.c | 208 ++++++++++++++++++ drivers/net/wireless/orinoco/hermes.h | 7 + drivers/net/wireless/orinoco/hermes_dld.c | 241 +-------------------- drivers/net/wireless/orinoco/orinoco_usb.c | 120 ++++++++++ drivers/net/wireless/orinoco/spectrum_cs.c | 1 + 6 files changed, 348 insertions(+), 237 deletions(-) diff --git a/drivers/net/wireless/orinoco/fw.c b/drivers/net/wireless/orinoco/fw.c index 07c79e5de32d..94c0853f6814 100644 --- a/drivers/net/wireless/orinoco/fw.c +++ b/drivers/net/wireless/orinoco/fw.c @@ -121,7 +121,7 @@ orinoco_dl_firmware(struct orinoco_private *priv, dev_dbg(dev, "Attempting to download firmware %s\n", firmware); /* Read current plug data */ - err = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 0); + err = hw->ops->read_pda(hw, pda, fw->pda_addr, fw->pda_size); dev_dbg(dev, "Read PDA returned %d\n", err); if (err) goto free; @@ -148,7 +148,7 @@ orinoco_dl_firmware(struct orinoco_private *priv, } /* Enable aux port to allow programming */ - err = hermesi_program_init(hw, le32_to_cpu(hdr->entry_point)); + err = hw->ops->program_init(hw, le32_to_cpu(hdr->entry_point)); dev_dbg(dev, "Program init returned %d\n", err); if (err != 0) goto abort; @@ -176,7 +176,7 @@ orinoco_dl_firmware(struct orinoco_private *priv, goto abort; /* Tell card we've finished */ - err = hermesi_program_end(hw); + err = hw->ops->program_end(hw); dev_dbg(dev, "Program end returned %d\n", err); if (err != 0) goto abort; @@ -223,7 +223,7 @@ symbol_dl_image(struct orinoco_private *priv, const struct fw_info *fw, if (!pda) return -ENOMEM; - ret = hermes_read_pda(hw, pda, fw->pda_addr, fw->pda_size, 1); + ret = hw->ops->read_pda(hw, pda, fw->pda_addr, fw->pda_size); if (ret) goto free; } diff --git a/drivers/net/wireless/orinoco/hermes.c b/drivers/net/wireless/orinoco/hermes.c index 845693fb25f3..6c6a23e08df6 100644 --- a/drivers/net/wireless/orinoco/hermes.c +++ b/drivers/net/wireless/orinoco/hermes.c @@ -51,6 +51,26 @@ #define CMD_COMPL_TIMEOUT (20000) /* in iterations of ~10us */ #define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */ +/* + * AUX port access. To unlock the AUX port write the access keys to the + * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL + * register. Then read it and make sure it's HERMES_AUX_ENABLED. + */ +#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */ +#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */ +#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */ +#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */ + +#define HERMES_AUX_PW0 0xFE01 +#define HERMES_AUX_PW1 0xDC23 +#define HERMES_AUX_PW2 0xBA45 + +/* HERMES_CMD_DOWNLD */ +#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD) +#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD) + /* * Debugging helpers */ @@ -170,6 +190,7 @@ void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing) hw->iobase = address; hw->reg_spacing = reg_spacing; hw->inten = 0x0; + hw->eeprom_pda = false; hw->ops = &hermes_ops_local; } EXPORT_SYMBOL(hermes_struct_init); @@ -529,6 +550,189 @@ static int hermes_write_ltv(hermes_t *hw, int bap, u16 rid, return err; } +/*** Hermes AUX control ***/ + +static inline void +hermes_aux_setaddr(hermes_t *hw, u32 addr) +{ + hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7)); + hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F)); +} + +static inline int +hermes_aux_control(hermes_t *hw, int enabled) +{ + int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED; + int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE; + int i; + + /* Already open? */ + if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state) + return 0; + + hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0); + hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1); + hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2); + hermes_write_reg(hw, HERMES_CONTROL, action); + + for (i = 0; i < 20; i++) { + udelay(10); + if (hermes_read_reg(hw, HERMES_CONTROL) == + desired_state) + return 0; + } + + return -EBUSY; +} + +/*** Hermes programming ***/ + +/* About to start programming data (Hermes I) + * offset is the entry point + * + * Spectrum_cs' Symbol fw does not require this + * wl_lkm Agere fw does + * Don't know about intersil + */ +static int hermesi_program_init(hermes_t *hw, u32 offset) +{ + int err; + + /* Disable interrupts?*/ + /*hw->inten = 0x0;*/ + /*hermes_write_regn(hw, INTEN, 0);*/ + /*hermes_set_irqmask(hw, 0);*/ + + /* Acknowledge any outstanding command */ + hermes_write_regn(hw, EVACK, 0xFFFF); + + /* Using init_cmd_wait rather than cmd_wait */ + err = hw->ops->init_cmd_wait(hw, + 0x0100 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + if (err) + return err; + + err = hw->ops->init_cmd_wait(hw, + 0x0000 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + if (err) + return err; + + err = hermes_aux_control(hw, 1); + pr_debug("AUX enable returned %d\n", err); + + if (err) + return err; + + pr_debug("Enabling volatile, EP 0x%08x\n", offset); + err = hw->ops->init_cmd_wait(hw, + HERMES_PROGRAM_ENABLE_VOLATILE, + offset & 0xFFFFu, + offset >> 16, + 0, + NULL); + pr_debug("PROGRAM_ENABLE returned %d\n", err); + + return err; +} + +/* Done programming data (Hermes I) + * + * Spectrum_cs' Symbol fw does not require this + * wl_lkm Agere fw does + * Don't know about intersil + */ +static int hermesi_program_end(hermes_t *hw) +{ + struct hermes_response resp; + int rc = 0; + int err; + + rc = hw->ops->cmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp); + + pr_debug("PROGRAM_DISABLE returned %d, " + "r0 0x%04x, r1 0x%04x, r2 0x%04x\n", + rc, resp.resp0, resp.resp1, resp.resp2); + + if ((rc == 0) && + ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD)) + rc = -EIO; + + err = hermes_aux_control(hw, 0); + pr_debug("AUX disable returned %d\n", err); + + /* Acknowledge any outstanding command */ + hermes_write_regn(hw, EVACK, 0xFFFF); + + /* Reinitialise, ignoring return */ + (void) hw->ops->init_cmd_wait(hw, 0x0000 | HERMES_CMD_INIT, + 0, 0, 0, NULL); + + return rc ? rc : err; +} + +static int hermes_program_bytes(struct hermes *hw, const char *data, + u32 addr, u32 len) +{ + /* wl lkm splits the programming into chunks of 2000 bytes. + * This restriction appears to come from USB. The PCMCIA + * adapters can program the whole lot in one go */ + hermes_aux_setaddr(hw, addr); + hermes_write_bytes(hw, HERMES_AUXDATA, data, len); + return 0; +} + +/* Read PDA from the adapter */ +static int hermes_read_pda(hermes_t *hw, __le16 *pda, u32 pda_addr, u16 pda_len) +{ + int ret; + u16 pda_size; + u16 data_len = pda_len; + __le16 *data = pda; + + if (hw->eeprom_pda) { + /* PDA of spectrum symbol is in eeprom */ + + /* Issue command to read EEPROM */ + ret = hw->ops->cmd_wait(hw, HERMES_CMD_READMIF, 0, NULL); + if (ret) + return ret; + } else { + /* wl_lkm does not include PDA size in the PDA area. + * We will pad the information into pda, so other routines + * don't have to be modified */ + pda[0] = cpu_to_le16(pda_len - 2); + /* Includes CFG_PROD_DATA but not itself */ + pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */ + data_len = pda_len - 4; + data = pda + 2; + } + + /* Open auxiliary port */ + ret = hermes_aux_control(hw, 1); + pr_debug("AUX enable returned %d\n", ret); + if (ret) + return ret; + + /* Read PDA */ + hermes_aux_setaddr(hw, pda_addr); + hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2); + + /* Close aux port */ + ret = hermes_aux_control(hw, 0); + pr_debug("AUX disable returned %d\n", ret); + + /* Check PDA length */ + pda_size = le16_to_cpu(pda[0]); + pr_debug("Actual PDA length %d, Max allowed %d\n", + pda_size, pda_len); + if (pda_size > pda_len) + return -EINVAL; + + return 0; +} + static void hermes_lock_irqsave(spinlock_t *lock, unsigned long *flags) __acquires(lock) { @@ -561,6 +765,10 @@ static const struct hermes_ops hermes_ops_local = { .write_ltv = hermes_write_ltv, .bap_pread = hermes_bap_pread, .bap_pwrite = hermes_bap_pwrite, + .read_pda = hermes_read_pda, + .program_init = hermesi_program_init, + .program_end = hermesi_program_end, + .program = hermes_program_bytes, .lock_irqsave = hermes_lock_irqsave, .unlock_irqrestore = hermes_unlock_irqrestore, .lock_irq = hermes_lock_irq, diff --git a/drivers/net/wireless/orinoco/hermes.h b/drivers/net/wireless/orinoco/hermes.h index aed14ff2d235..9ca34e722b45 100644 --- a/drivers/net/wireless/orinoco/hermes.h +++ b/drivers/net/wireless/orinoco/hermes.h @@ -393,6 +393,12 @@ struct hermes_ops { u16 id, u16 offset); int (*bap_pwrite)(struct hermes *hw, int bap, const void *buf, int len, u16 id, u16 offset); + int (*read_pda)(struct hermes *hw, __le16 *pda, + u32 pda_addr, u16 pda_len); + int (*program_init)(struct hermes *hw, u32 entry_point); + int (*program_end)(struct hermes *hw); + int (*program)(struct hermes *hw, const char *buf, + u32 addr, u32 len); void (*lock_irqsave)(spinlock_t *lock, unsigned long *flags); void (*unlock_irqrestore)(spinlock_t *lock, unsigned long *flags); void (*lock_irq)(spinlock_t *lock); @@ -406,6 +412,7 @@ typedef struct hermes { #define HERMES_16BIT_REGSPACING 0 #define HERMES_32BIT_REGSPACING 1 u16 inten; /* Which interrupts should be enabled? */ + bool eeprom_pda; const struct hermes_ops *ops; void *priv; } hermes_t; diff --git a/drivers/net/wireless/orinoco/hermes_dld.c b/drivers/net/wireless/orinoco/hermes_dld.c index 8f22e2026a82..6da85e75fce0 100644 --- a/drivers/net/wireless/orinoco/hermes_dld.c +++ b/drivers/net/wireless/orinoco/hermes_dld.c @@ -46,37 +46,11 @@ #define PFX "hermes_dld: " -/* - * AUX port access. To unlock the AUX port write the access keys to the - * PARAM0-2 registers, then write HERMES_AUX_ENABLE to the HERMES_CONTROL - * register. Then read it and make sure it's HERMES_AUX_ENABLED. - */ -#define HERMES_AUX_ENABLE 0x8000 /* Enable auxiliary port access */ -#define HERMES_AUX_DISABLE 0x4000 /* Disable to auxiliary port access */ -#define HERMES_AUX_ENABLED 0xC000 /* Auxiliary port is open */ -#define HERMES_AUX_DISABLED 0x0000 /* Auxiliary port is closed */ - -#define HERMES_AUX_PW0 0xFE01 -#define HERMES_AUX_PW1 0xDC23 -#define HERMES_AUX_PW2 0xBA45 - -/* HERMES_CMD_DOWNLD */ -#define HERMES_PROGRAM_DISABLE (0x0000 | HERMES_CMD_DOWNLD) -#define HERMES_PROGRAM_ENABLE_VOLATILE (0x0100 | HERMES_CMD_DOWNLD) -#define HERMES_PROGRAM_ENABLE_NON_VOLATILE (0x0200 | HERMES_CMD_DOWNLD) -#define HERMES_PROGRAM_NON_VOLATILE (0x0300 | HERMES_CMD_DOWNLD) - /* End markers used in dblocks */ #define PDI_END 0x00000000 /* End of PDA */ #define BLOCK_END 0xFFFFFFFF /* Last image block */ #define TEXT_END 0x1A /* End of text header */ -/* Limit the amout we try to download in a single shot. - * Size is in bytes. - */ -#define MAX_DL_SIZE 1024 -#define LIMIT_PROGRAM_SIZE 0 - /* * The following structures have little-endian fields denoted by * the leading underscore. Don't access them directly - use inline @@ -165,41 +139,6 @@ pdi_len(const struct pdi *pdi) return 2 * (le16_to_cpu(pdi->len) - 1); } -/*** Hermes AUX control ***/ - -static inline void -hermes_aux_setaddr(hermes_t *hw, u32 addr) -{ - hermes_write_reg(hw, HERMES_AUXPAGE, (u16) (addr >> 7)); - hermes_write_reg(hw, HERMES_AUXOFFSET, (u16) (addr & 0x7F)); -} - -static inline int -hermes_aux_control(hermes_t *hw, int enabled) -{ - int desired_state = enabled ? HERMES_AUX_ENABLED : HERMES_AUX_DISABLED; - int action = enabled ? HERMES_AUX_ENABLE : HERMES_AUX_DISABLE; - int i; - - /* Already open? */ - if (hermes_read_reg(hw, HERMES_CONTROL) == desired_state) - return 0; - - hermes_write_reg(hw, HERMES_PARAM0, HERMES_AUX_PW0); - hermes_write_reg(hw, HERMES_PARAM1, HERMES_AUX_PW1); - hermes_write_reg(hw, HERMES_PARAM2, HERMES_AUX_PW2); - hermes_write_reg(hw, HERMES_CONTROL, action); - - for (i = 0; i < 20; i++) { - udelay(10); - if (hermes_read_reg(hw, HERMES_CONTROL) == - desired_state) - return 0; - } - - return -EBUSY; -} - /*** Plug Data Functions ***/ /* @@ -271,62 +210,7 @@ hermes_plug_pdi(hermes_t *hw, const struct pdr *first_pdr, return -EINVAL; /* do the actual plugging */ - hermes_aux_setaddr(hw, pdr_addr(pdr)); - hermes_write_bytes(hw, HERMES_AUXDATA, pdi->data, pdi_len(pdi)); - - return 0; -} - -/* Read PDA from the adapter */ -int hermes_read_pda(hermes_t *hw, - __le16 *pda, - u32 pda_addr, - u16 pda_len, - int use_eeprom) /* can we get this into hw? */ -{ - int ret; - u16 pda_size; - u16 data_len = pda_len; - __le16 *data = pda; - - if (use_eeprom) { - /* PDA of spectrum symbol is in eeprom */ - - /* Issue command to read EEPROM */ - ret = hw->ops->cmd_wait(hw, HERMES_CMD_READMIF, 0, NULL); - if (ret) - return ret; - } else { - /* wl_lkm does not include PDA size in the PDA area. - * We will pad the information into pda, so other routines - * don't have to be modified */ - pda[0] = cpu_to_le16(pda_len - 2); - /* Includes CFG_PROD_DATA but not itself */ - pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */ - data_len = pda_len - 4; - data = pda + 2; - } - - /* Open auxiliary port */ - ret = hermes_aux_control(hw, 1); - pr_debug(PFX "AUX enable returned %d\n", ret); - if (ret) - return ret; - - /* read PDA from EEPROM */ - hermes_aux_setaddr(hw, pda_addr); - hermes_read_words(hw, HERMES_AUXDATA, data, data_len / 2); - - /* Close aux port */ - ret = hermes_aux_control(hw, 0); - pr_debug(PFX "AUX disable returned %d\n", ret); - - /* Check PDA length */ - pda_size = le16_to_cpu(pda[0]); - pr_debug(PFX "Actual PDA length %d, Max allowed %d\n", - pda_size, pda_len); - if (pda_size > pda_len) - return -EINVAL; + hw->ops->program(hw, pdi->data, pdr_addr(pdr), pdi_len(pdi)); return 0; } @@ -389,101 +273,13 @@ hermes_blocks_length(const char *first_block, const void *end) /*** Hermes programming ***/ -/* About to start programming data (Hermes I) - * offset is the entry point - * - * Spectrum_cs' Symbol fw does not require this - * wl_lkm Agere fw does - * Don't know about intersil - */ -int hermesi_program_init(hermes_t *hw, u32 offset) -{ - int err; - - /* Disable interrupts?*/ - /*hw->inten = 0x0;*/ - /*hermes_write_regn(hw, INTEN, 0);*/ - /*hermes_set_irqmask(hw, 0);*/ - - /* Acknowledge any outstanding command */ - hermes_write_regn(hw, EVACK, 0xFFFF); - - /* Using init_cmd_wait rather than cmd_wait */ - err = hw->ops->init_cmd_wait(hw, - 0x0100 | HERMES_CMD_INIT, - 0, 0, 0, NULL); - if (err) - return err; - - err = hw->ops->init_cmd_wait(hw, - 0x0000 | HERMES_CMD_INIT, - 0, 0, 0, NULL); - if (err) - return err; - - err = hermes_aux_control(hw, 1); - pr_debug(PFX "AUX enable returned %d\n", err); - - if (err) - return err; - - pr_debug(PFX "Enabling volatile, EP 0x%08x\n", offset); - err = hw->ops->init_cmd_wait(hw, - HERMES_PROGRAM_ENABLE_VOLATILE, - offset & 0xFFFFu, - offset >> 16, - 0, - NULL); - pr_debug(PFX "PROGRAM_ENABLE returned %d\n", err); - - return err; -} - -/* Done programming data (Hermes I) - * - * Spectrum_cs' Symbol fw does not require this - * wl_lkm Agere fw does - * Don't know about intersil - */ -int hermesi_program_end(hermes_t *hw) -{ - struct hermes_response resp; - int rc = 0; - int err; - - rc = hw->ops->cmd_wait(hw, HERMES_PROGRAM_DISABLE, 0, &resp); - - pr_debug(PFX "PROGRAM_DISABLE returned %d, " - "r0 0x%04x, r1 0x%04x, r2 0x%04x\n", - rc, resp.resp0, resp.resp1, resp.resp2); - - if ((rc == 0) && - ((resp.status & HERMES_STATUS_CMDCODE) != HERMES_CMD_DOWNLD)) - rc = -EIO; - - err = hermes_aux_control(hw, 0); - pr_debug(PFX "AUX disable returned %d\n", err); - - /* Acknowledge any outstanding command */ - hermes_write_regn(hw, EVACK, 0xFFFF); - - /* Reinitialise, ignoring return */ - (void) hw->ops->init_cmd_wait(hw, 0x0000 | HERMES_CMD_INIT, - 0, 0, 0, NULL); - - return rc ? rc : err; -} - /* Program the data blocks */ int hermes_program(hermes_t *hw, const char *first_block, const void *end) { const struct dblock *blk; u32 blkaddr; u32 blklen; -#if LIMIT_PROGRAM_SIZE - u32 addr; - u32 len; -#endif + int err = 0; blk = (const struct dblock *) first_block; @@ -498,30 +294,10 @@ int hermes_program(hermes_t *hw, const char *first_block, const void *end) pr_debug(PFX "Programming block of length %d " "to address 0x%08x\n", blklen, blkaddr); -#if !LIMIT_PROGRAM_SIZE - /* wl_lkm driver splits this into writes of 2000 bytes */ - hermes_aux_setaddr(hw, blkaddr); - hermes_write_bytes(hw, HERMES_AUXDATA, blk->data, - blklen); -#else - len = (blklen < MAX_DL_SIZE) ? blklen : MAX_DL_SIZE; - addr = blkaddr; + err = hw->ops->program(hw, blk->data, blkaddr, blklen); + if (err) + break; - while (addr < (blkaddr + blklen)) { - pr_debug(PFX "Programming subblock of length %d " - "to address 0x%08x. Data @ %p\n", - len, addr, &blk->data[addr - blkaddr]); - - hermes_aux_setaddr(hw, addr); - hermes_write_bytes(hw, HERMES_AUXDATA, - &blk->data[addr - blkaddr], - len); - - addr += len; - len = ((blkaddr + blklen - addr) < MAX_DL_SIZE) ? - (blkaddr + blklen - addr) : MAX_DL_SIZE; - } -#endif blk = (const struct dblock *) &blk->data[blklen]; if ((void *) blk > (end - sizeof(*blk))) @@ -530,7 +306,7 @@ int hermes_program(hermes_t *hw, const char *first_block, const void *end) blkaddr = dblock_addr(blk); blklen = dblock_len(blk); } - return 0; + return err; } /*** Default plugging data for Hermes I ***/ @@ -690,9 +466,8 @@ int hermes_apply_pda_with_defaults(hermes_t *hw, if ((pdi_len(pdi) == pdr_len(pdr)) && ((void *) pdi->data + pdi_len(pdi) < pda_end)) { /* do the actual plugging */ - hermes_aux_setaddr(hw, pdr_addr(pdr)); - hermes_write_bytes(hw, HERMES_AUXDATA, - pdi->data, pdi_len(pdi)); + hw->ops->program(hw, pdi->data, pdr_addr(pdr), + pdi_len(pdi)); } } diff --git a/drivers/net/wireless/orinoco/orinoco_usb.c b/drivers/net/wireless/orinoco/orinoco_usb.c index 8e1b31cbd375..e22093359f3e 100644 --- a/drivers/net/wireless/orinoco/orinoco_usb.c +++ b/drivers/net/wireless/orinoco/orinoco_usb.c @@ -184,6 +184,11 @@ MODULE_FIRMWARE("orinoco_ezusb_fw"); #define EZUSB_RID_RX 0x0701 #define EZUSB_RID_INIT1 0x0702 #define EZUSB_RID_ACK 0x0710 +#define EZUSB_RID_READ_PDA 0x0800 +#define EZUSB_RID_PROG_INIT 0x0852 +#define EZUSB_RID_PROG_SET_ADDR 0x0853 +#define EZUSB_RID_PROG_BYTES 0x0854 +#define EZUSB_RID_PROG_END 0x0855 #define EZUSB_RID_DOCMD 0x0860 /* Recognize info frames */ @@ -198,6 +203,8 @@ MODULE_FIRMWARE("orinoco_ezusb_fw"); #define BULK_BUF_SIZE 2048 +#define MAX_DL_SIZE (BULK_BUF_SIZE - sizeof(struct ezusb_packet)) + #define FW_BUF_SIZE 64 #define FW_VAR_OFFSET_PTR 0x359 #define FW_VAR_VALUE 0 @@ -1077,6 +1084,115 @@ static int ezusb_bap_pread(struct hermes *hw, int bap, return 0; } +static int ezusb_read_pda(struct hermes *hw, __le16 *pda, + u32 pda_addr, u16 pda_len) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + __le16 data[] = { + cpu_to_le16(pda_addr & 0xffff), + cpu_to_le16(pda_len - 4) + }; + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_READ_PDA, EZUSB_RID_READ_PDA); + if (!ctx) + return -ENOMEM; + + /* wl_lkm does not include PDA size in the PDA area. + * We will pad the information into pda, so other routines + * don't have to be modified */ + pda[0] = cpu_to_le16(pda_len - 2); + /* Includes CFG_PROD_DATA but not itself */ + pda[1] = cpu_to_le16(0x0800); /* CFG_PROD_DATA */ + + return ezusb_access_ltv(upriv, ctx, sizeof(data), &data, + EZUSB_FRAME_CONTROL, &pda[2], pda_len - 4, + NULL); +} + +static int ezusb_program_init(struct hermes *hw, u32 entry_point) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + __le32 data = cpu_to_le32(entry_point); + + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_INIT, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + return ezusb_access_ltv(upriv, ctx, sizeof(data), &data, + EZUSB_FRAME_CONTROL, NULL, 0, NULL); +} + +static int ezusb_program_end(struct hermes *hw) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_END, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + return ezusb_access_ltv(upriv, ctx, 0, NULL, + EZUSB_FRAME_CONTROL, NULL, 0, NULL); +} + +static int ezusb_program_bytes(struct hermes *hw, const char *buf, + u32 addr, u32 len) +{ + struct ezusb_priv *upriv = hw->priv; + struct request_context *ctx; + __le32 data = cpu_to_le32(addr); + int err; + + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_SET_ADDR, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + err = ezusb_access_ltv(upriv, ctx, sizeof(data), &data, + EZUSB_FRAME_CONTROL, NULL, 0, NULL); + if (err) + return err; + + ctx = ezusb_alloc_ctx(upriv, EZUSB_RID_PROG_BYTES, EZUSB_RID_ACK); + if (!ctx) + return -ENOMEM; + + return ezusb_access_ltv(upriv, ctx, len, buf, + EZUSB_FRAME_CONTROL, NULL, 0, NULL); +} + +static int ezusb_program(struct hermes *hw, const char *buf, + u32 addr, u32 len) +{ + u32 ch_addr; + u32 ch_len; + int err = 0; + + /* We can only send 2048 bytes out of the bulk xmit at a time, + * so we have to split any programming into chunks of <2048 + * bytes. */ + + ch_len = (len < MAX_DL_SIZE) ? len : MAX_DL_SIZE; + ch_addr = addr; + + while (ch_addr < (addr + len)) { + pr_debug("Programming subblock of length %d " + "to address 0x%08x. Data @ %p\n", + ch_len, ch_addr, &buf[ch_addr - addr]); + + err = ezusb_program_bytes(hw, &buf[ch_addr - addr], + ch_addr, ch_len); + if (err) + break; + + ch_addr += ch_len; + ch_len = ((addr + len - ch_addr) < MAX_DL_SIZE) ? + (addr + len - ch_addr) : MAX_DL_SIZE; + } + + return err; +} + static netdev_tx_t ezusb_xmit(struct sk_buff *skb, struct net_device *dev) { struct orinoco_private *priv = ndev_priv(dev); @@ -1440,6 +1556,10 @@ static const struct hermes_ops ezusb_ops = { .read_ltv = ezusb_read_ltv, .write_ltv = ezusb_write_ltv, .bap_pread = ezusb_bap_pread, + .read_pda = ezusb_read_pda, + .program_init = ezusb_program_init, + .program_end = ezusb_program_end, + .program = ezusb_program, .lock_irqsave = ezusb_lock_irqsave, .unlock_irqrestore = ezusb_unlock_irqrestore, .lock_irq = ezusb_lock_irq, diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c index b4f68ef771e4..9b1af4976bf5 100644 --- a/drivers/net/wireless/orinoco/spectrum_cs.c +++ b/drivers/net/wireless/orinoco/spectrum_cs.c @@ -349,6 +349,7 @@ spectrum_cs_config(struct pcmcia_device *link) goto failed; hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING); + hw->eeprom_pda = true; /* * This actually configures the PCMCIA socket -- setting up From a75b4363eaafa99d909da4f1192322a78b074c73 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 1 May 2010 18:53:51 +0200 Subject: [PATCH 097/109] mac80211: allow controlling aggregation manually This allows enabling TX and disabling both TX and RX aggregation sessions manually in debugfs. It is very useful for debugging session initiation and teardown problems since with this you don't have to force a lot of traffic to get aggregation and thus have less data to analyse. Also, to debug mac80211 code itself, make hwsim "support" aggregation sessions. It will still just transfer the frame, but go through the setup and teardown handshakes. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/mac80211_hwsim.c | 3 +- net/mac80211/debugfs_sta.c | 65 ++++++++++++++++++++++++++- 2 files changed, 66 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index d016933d7573..ebcf43904291 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1299,7 +1299,8 @@ static int __init init_mac80211_hwsim(void) hw->flags = IEEE80211_HW_MFP_CAPABLE | IEEE80211_HW_SIGNAL_DBM | IEEE80211_HW_SUPPORTS_STATIC_SMPS | - IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS; + IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS | + IEEE80211_HW_AMPDU_AGGREGATION; /* ask mac80211 to reserve space for magic */ hw->vif_data_size = sizeof(struct hwsim_vif_priv); diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c index 6bc9b07c3eda..e763f1529ddb 100644 --- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -39,6 +39,13 @@ static const struct file_operations sta_ ##name## _ops = { \ .open = mac80211_open_file_generic, \ } +#define STA_OPS_RW(name) \ +static const struct file_operations sta_ ##name## _ops = { \ + .read = sta_##name##_read, \ + .write = sta_##name##_write, \ + .open = mac80211_open_file_generic, \ +} + #define STA_FILE(name, field, format) \ STA_READ_##format(name, field) \ STA_OPS(name) @@ -156,7 +163,63 @@ static ssize_t sta_agg_status_read(struct file *file, char __user *userbuf, return simple_read_from_buffer(userbuf, count, ppos, buf, p - buf); } -STA_OPS(agg_status); + +static ssize_t sta_agg_status_write(struct file *file, const char __user *userbuf, + size_t count, loff_t *ppos) +{ + char _buf[12], *buf = _buf; + struct sta_info *sta = file->private_data; + bool start, tx; + unsigned long tid; + int ret; + + if (count > sizeof(_buf)) + return -EINVAL; + + if (copy_from_user(buf, userbuf, count)) + return -EFAULT; + + buf[sizeof(_buf) - 1] = '\0'; + + if (strncmp(buf, "tx ", 3) == 0) { + buf += 3; + tx = true; + } else if (strncmp(buf, "rx ", 3) == 0) { + buf += 3; + tx = false; + } else + return -EINVAL; + + if (strncmp(buf, "start ", 6) == 0) { + buf += 6; + start = true; + if (!tx) + return -EINVAL; + } else if (strncmp(buf, "stop ", 5) == 0) { + buf += 5; + start = false; + } else + return -EINVAL; + + tid = simple_strtoul(buf, NULL, 0); + + if (tid >= STA_TID_NUM) + return -EINVAL; + + if (tx) { + if (start) + ret = ieee80211_start_tx_ba_session(&sta->sta, tid); + else + ret = ieee80211_stop_tx_ba_session(&sta->sta, tid, + WLAN_BACK_RECIPIENT); + } else { + __ieee80211_stop_rx_ba_session(sta, tid, WLAN_BACK_RECIPIENT, 3); + ret = 0; + } + + return ret ?: count; +} +STA_OPS_RW(agg_status); static ssize_t sta_ht_capa_read(struct file *file, char __user *userbuf, size_t count, loff_t *ppos) From be4a4b6a5d2f76393f545a2545fbaa1b65577e13 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 May 2010 08:49:48 +0200 Subject: [PATCH 098/109] mac80211: improve IBSS scanning When IBSS is fixed to a frequency, it can still scan to try to find the right BSSID. This makes sense if the BSSID isn't also fixed, but it need not scan all channels -- just one is sufficient. Make it do that by moving the scan setup code to ieee80211_request_internal_scan() and include a channel variable setting. Note that this can be further improved to start the IBSS right away if both frequency and BSSID are fixed. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ibss.c | 9 ++++++--- net/mac80211/ieee80211_i.h | 3 ++- net/mac80211/main.c | 17 +---------------- net/mac80211/scan.c | 28 +++++++++++++++++++++++++++- 4 files changed, 36 insertions(+), 21 deletions(-) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index c585fced8584..ba752362b2b2 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -488,7 +488,9 @@ static void ieee80211_sta_merge_ibss(struct ieee80211_sub_if_data *sdata) printk(KERN_DEBUG "%s: No active IBSS STAs - trying to scan for other " "IBSS networks with same SSID (merge)\n", sdata->name); - ieee80211_request_internal_scan(sdata, ifibss->ssid, ifibss->ssid_len); + ieee80211_request_internal_scan(sdata, + ifibss->ssid, ifibss->ssid_len, + ifibss->fixed_channel ? ifibss->channel : NULL); } static void ieee80211_sta_create_ibss(struct ieee80211_sub_if_data *sdata) @@ -595,8 +597,9 @@ static void ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata) printk(KERN_DEBUG "%s: Trigger new scan to find an IBSS to " "join\n", sdata->name); - ieee80211_request_internal_scan(sdata, ifibss->ssid, - ifibss->ssid_len); + ieee80211_request_internal_scan(sdata, + ifibss->ssid, ifibss->ssid_len, + ifibss->fixed_channel ? ifibss->channel : NULL); } else { int interval = IEEE80211_SCAN_INTERVAL; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 4e73660ebe99..c8077a3647c6 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1020,7 +1020,8 @@ void ieee80211_ibss_restart(struct ieee80211_sub_if_data *sdata); /* scan/BSS handling */ void ieee80211_scan_work(struct work_struct *work); int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata, - const u8 *ssid, u8 ssid_len); + const u8 *ssid, u8 ssid_len, + struct ieee80211_channel *chan); int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata, struct cfg80211_scan_request *req); void ieee80211_scan_cancel(struct ieee80211_local *local); diff --git a/net/mac80211/main.c b/net/mac80211/main.c index ebcca0eaf1dc..353b6b42d9c5 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -439,7 +439,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) struct ieee80211_local *local = hw_to_local(hw); int result; enum ieee80211_band band; - int channels, i, j, max_bitrates; + int channels, max_bitrates; bool supp_ht; static const u32 cipher_suites[] = { WLAN_CIPHER_SUITE_WEP40, @@ -605,21 +605,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) ieee80211_led_init(local); - /* alloc internal scan request */ - i = 0; - local->int_scan_req->ssids = &local->scan_ssid; - local->int_scan_req->n_ssids = 1; - for (band = 0; band < IEEE80211_NUM_BANDS; band++) { - if (!hw->wiphy->bands[band]) - continue; - for (j = 0; j < hw->wiphy->bands[band]->n_channels; j++) { - local->int_scan_req->channels[i] = - &hw->wiphy->bands[band]->channels[j]; - i++; - } - } - local->int_scan_req->n_channels = i; - local->network_latency_notifier.notifier_call = ieee80211_max_network_latency; result = pm_qos_add_notifier(PM_QOS_NETWORK_LATENCY, diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index a9d40584e383..414651217b49 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -728,10 +728,12 @@ int ieee80211_request_scan(struct ieee80211_sub_if_data *sdata, } int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata, - const u8 *ssid, u8 ssid_len) + const u8 *ssid, u8 ssid_len, + struct ieee80211_channel *chan) { struct ieee80211_local *local = sdata->local; int ret = -EBUSY; + enum nl80211_band band; mutex_lock(&local->scan_mtx); @@ -739,6 +741,30 @@ int ieee80211_request_internal_scan(struct ieee80211_sub_if_data *sdata, if (local->scan_req) goto unlock; + /* fill internal scan request */ + if (!chan) { + int i, nchan = 0; + + for (band = 0; band < IEEE80211_NUM_BANDS; band++) { + if (!local->hw.wiphy->bands[band]) + continue; + for (i = 0; + i < local->hw.wiphy->bands[band]->n_channels; + i++) { + local->int_scan_req->channels[nchan] = + &local->hw.wiphy->bands[band]->channels[i]; + nchan++; + } + } + + local->int_scan_req->n_channels = nchan; + } else { + local->int_scan_req->channels[0] = chan; + local->int_scan_req->n_channels = 1; + } + + local->int_scan_req->ssids = &local->scan_ssid; + local->int_scan_req->n_ssids = 1; memcpy(local->int_scan_req->ssids[0].ssid, ssid, IEEE80211_MAX_SSID_LEN); local->int_scan_req->ssids[0].ssid_len = ssid_len; From 23ff98fc21615e324647af540a4ec1c24f993687 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 3 May 2010 09:21:14 +0200 Subject: [PATCH 099/109] mac80211_hwsim: fix double-scan detection Currently, hwsim will always detect a double scan after the first one has finished ... Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- drivers/net/wireless/mac80211_hwsim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index ebcf43904291..62a739f6c37b 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1020,7 +1020,7 @@ static void mac80211_hwsim_sw_scan_complete(struct ieee80211_hw *hw) mutex_lock(&hwsim->mutex); printk(KERN_DEBUG "hwsim sw_scan_complete\n"); - hwsim->scanning = true; + hwsim->scanning = false; mutex_unlock(&hwsim->mutex); } From 12ef116bf750c221e214e33c61e7f4c98300b5fd Mon Sep 17 00:00:00 2001 From: Xose Vazquez Perez Date: Mon, 3 May 2010 13:11:38 +0200 Subject: [PATCH 100/109] wireless: rt2x00: rt2800usb: be in sync with latest windows drivers. 0x07d1,0x3c17 D-Link Wireless N 150 USB Adapter DWA-125 0x1b75,0x3071 Ovislink Airlive WN-301USB 0x1d4d,0x0011 Pegatron Ralink RT3072 802.11b/g/n Wireless Lan USB Device 0x083a,0xf511 Arcadyan 802.11 USB Wireless LAN Card 0x13d3,0x3322 AzureWave 802.11 n/g/b USB Wireless LAN Card Signed-off-by: Xose Vazquez Perez Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800usb.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 6f2a945cd45c..2b79d6e58f40 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1023,7 +1023,7 @@ static struct usb_device_id rt2800usb_device_table[] = { #ifdef CONFIG_RT2800USB_UNKNOWN /* * Unclear what kind of devices these are (they aren't supported by the - * vendor driver). + * vendor linux driver). */ /* Amigo */ { USB_DEVICE(0x0e0b, 0x9031), USB_DEVICE_DATA(&rt2800usb_ops) }, @@ -1036,6 +1036,7 @@ static struct usb_device_id rt2800usb_device_table[] = { /* AzureWave */ { USB_DEVICE(0x13d3, 0x3262), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x13d3, 0x3284), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x13d3, 0x3322), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Belkin */ { USB_DEVICE(0x050d, 0x825a), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Buffalo */ @@ -1054,6 +1055,7 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x07d1, 0x3c0b), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x07d1, 0x3c13), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x07d1, 0x3c15), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x07d1, 0x3c17), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Encore */ { USB_DEVICE(0x203d, 0x14a1), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Gemtek */ @@ -1070,11 +1072,13 @@ static struct usb_device_id rt2800usb_device_table[] = { /* Motorola */ { USB_DEVICE(0x100d, 0x9032), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Ovislink */ + { USB_DEVICE(0x1b75, 0x3071), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1b75, 0x3072), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Pegatron */ { USB_DEVICE(0x05a6, 0x0101), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1d4d, 0x0002), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x1d4d, 0x0010), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x1d4d, 0x0011), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Planex */ { USB_DEVICE(0x2019, 0xab24), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Qcom */ @@ -1083,6 +1087,7 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x083a, 0xa512), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x083a, 0xc522), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x083a, 0xd522), USB_DEVICE_DATA(&rt2800usb_ops) }, + { USB_DEVICE(0x083a, 0xf511), USB_DEVICE_DATA(&rt2800usb_ops) }, /* Sweex */ { USB_DEVICE(0x177f, 0x0153), USB_DEVICE_DATA(&rt2800usb_ops) }, { USB_DEVICE(0x177f, 0x0313), USB_DEVICE_DATA(&rt2800usb_ops) }, From 52c773861895faaf544bd398c87ba10dff29f313 Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Mon, 3 May 2010 16:12:39 -0400 Subject: [PATCH 101/109] iwmc3200wifi: fix busted iwm_debugfs_init definition Looks like we missed removing the return statement in the non-CONFIG_IWM_DEBUG dummy implementation of iwm_debugfs_init... Signed-off-by: John W. Linville --- drivers/net/wireless/iwmc3200wifi/debug.h | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwmc3200wifi/debug.h b/drivers/net/wireless/iwmc3200wifi/debug.h index f98bf125a8ae..a0c13a49ab3c 100644 --- a/drivers/net/wireless/iwmc3200wifi/debug.h +++ b/drivers/net/wireless/iwmc3200wifi/debug.h @@ -116,10 +116,7 @@ struct iwm_debugfs { void iwm_debugfs_init(struct iwm_priv *iwm); void iwm_debugfs_exit(struct iwm_priv *iwm); #else -static inline void iwm_debugfs_init(struct iwm_priv *iwm) -{ - return 0; -} +static inline void iwm_debugfs_init(struct iwm_priv *iwm) {} static inline void iwm_debugfs_exit(struct iwm_priv *iwm) {} #endif From 3d79b2a9eeaa066b35c49fbb17e3156a3c482c3e Mon Sep 17 00:00:00 2001 From: Reinette Chatre Date: Mon, 3 May 2010 10:55:07 -0700 Subject: [PATCH 102/109] iwlwifi: recalculate average tpt if not current We currently have this check as a BUG_ON, which is being hit by people. Previously it was an error with a recalculation if not current, return that code. The BUG_ON was introduced by: commit 3110bef78cb4282c58245bc8fd6d95d9ccb19749 Author: Guy Cohen Date: Tue Sep 9 10:54:54 2008 +0800 iwlwifi: Added support for 3 antennas ... the portion adding the BUG_ON is reverted since we are encountering the error and BUG_ON was created with assumption that error is not encountered. Signed-off-by: Reinette Chatre Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-agn-rs.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index f01f242659c3..331c23a6c4e8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -2077,10 +2077,12 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, } /* Else we have enough samples; calculate estimate of * actual average throughput */ - - /* Sanity-check TPT calculations */ - BUG_ON(window->average_tpt != ((window->success_ratio * - tbl->expected_tpt[index] + 64) / 128)); + if (window->average_tpt != ((window->success_ratio * + tbl->expected_tpt[index] + 64) / 128)) { + IWL_ERR(priv, "expected_tpt should have been calculated by now\n"); + window->average_tpt = ((window->success_ratio * + tbl->expected_tpt[index] + 64) / 128); + } /* If we are searching for better modulation mode, check success. */ if (lq_sta->search_better_tbl && From c2661486ebacc9c2a86757d8ff1d40b3efe8a08b Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Mon, 3 May 2010 22:43:02 +0200 Subject: [PATCH 103/109] rt2x00: Remove rt2x00pci.h include from rt2800lib. PCI specific code has been remove quite some time ago. Signed-off-by: Gertjan van Wingerde Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800lib.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 674609d1a727..7310f34cc12a 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -40,9 +40,6 @@ #if defined(CONFIG_RT2X00_LIB_USB) || defined(CONFIG_RT2X00_LIB_USB_MODULE) #include "rt2x00usb.h" #endif -#if defined(CONFIG_RT2X00_LIB_PCI) || defined(CONFIG_RT2X00_LIB_PCI_MODULE) -#include "rt2x00pci.h" -#endif #include "rt2800lib.h" #include "rt2800.h" #include "rt2800usb.h" From 79a854f1e1a4482243fe4a2b199e199225b87bf6 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Mon, 3 May 2010 22:43:03 +0200 Subject: [PATCH 104/109] rt2x00: Enable RT30xx by default. Now that RT30xx support is at the same level as RT28xx support we can enable these devices by default. Signed-off-by: Gertjan van Wingerde Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 5239e082cd0f..eea1ef2f502b 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -87,7 +87,7 @@ if RT2800PCI config RT2800PCI_RT30XX bool "rt2800pci - Include support for rt30xx (PCI/PCIe/PCMCIA) devices" - default n + default y ---help--- This adds support for rt30xx wireless chipset family to the rt2800pci driver. @@ -156,7 +156,7 @@ if RT2800USB config RT2800USB_RT30XX bool "rt2800usb - Include support for rt30xx (USB) devices" - default n + default y ---help--- This adds support for rt30xx wireless chipset family to the rt2800usb driver. From a21ee724034b21d51d74eec8e426702a627eb465 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Mon, 3 May 2010 22:43:04 +0200 Subject: [PATCH 105/109] rt2x00: Fix HT40+/HT40- setting in rt2800. Inspection of the Ralink vendor driver shows that the TX_BAND_CFG register and BBP register 3 are about HT40- indication, not about HT40+ indication. Inverse the meaning of these fields in the code. Signed-off-by: Gertjan van Wingerde Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2800.h | 4 ++-- drivers/net/wireless/rt2x00/rt2800lib.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index 4c0b48173213..2aa03751c341 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -845,7 +845,7 @@ * TX_BAND_CFG: 0x1 use upper 20MHz, 0x0 use lower 20MHz */ #define TX_BAND_CFG 0x132c -#define TX_BAND_CFG_HT40_PLUS FIELD32(0x00000001) +#define TX_BAND_CFG_HT40_MINUS FIELD32(0x00000001) #define TX_BAND_CFG_A FIELD32(0x00000002) #define TX_BAND_CFG_BG FIELD32(0x00000004) @@ -1519,7 +1519,7 @@ struct mac_iveiv_entry { * BBP 3: RX Antenna */ #define BBP3_RX_ANTENNA FIELD8(0x18) -#define BBP3_HT40_PLUS FIELD8(0x20) +#define BBP3_HT40_MINUS FIELD8(0x20) /* * BBP 4: Bandwidth diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 7310f34cc12a..6d2c66d9b290 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -867,7 +867,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, } rt2800_register_read(rt2x00dev, TX_BAND_CFG, ®); - rt2x00_set_field32(®, TX_BAND_CFG_HT40_PLUS, conf_is_ht40_plus(conf)); + rt2x00_set_field32(®, TX_BAND_CFG_HT40_MINUS, conf_is_ht40_minus(conf)); rt2x00_set_field32(®, TX_BAND_CFG_A, rf->channel > 14); rt2x00_set_field32(®, TX_BAND_CFG_BG, rf->channel <= 14); rt2800_register_write(rt2x00dev, TX_BAND_CFG, reg); @@ -900,7 +900,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, rt2800_bbp_write(rt2x00dev, 4, bbp); rt2800_bbp_read(rt2x00dev, 3, &bbp); - rt2x00_set_field8(&bbp, BBP3_HT40_PLUS, conf_is_ht40_plus(conf)); + rt2x00_set_field8(&bbp, BBP3_HT40_MINUS, conf_is_ht40_minus(conf)); rt2800_bbp_write(rt2x00dev, 3, bbp); if (rt2x00_rt_rev(rt2x00dev, RT2860, REV_RT2860C)) { From df624ca5413d84b3082246de384823fbe8fed6e4 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Mon, 3 May 2010 22:43:05 +0200 Subject: [PATCH 106/109] rt2x00: Register frame length in TX entry descriptor instead of L2PAD. And use it consistently in the chipset drivers. Preparation for further clean ups. Signed-off-by: Gertjan van Wingerde Signed-off-by: John W. Linville --- drivers/net/wireless/rt2x00/rt2400pci.c | 4 ++-- drivers/net/wireless/rt2x00/rt2500pci.c | 2 +- drivers/net/wireless/rt2x00/rt2500usb.c | 2 +- drivers/net/wireless/rt2x00/rt2800pci.c | 2 +- drivers/net/wireless/rt2x00/rt2800usb.c | 2 +- drivers/net/wireless/rt2x00/rt2x00queue.c | 6 ++---- drivers/net/wireless/rt2x00/rt2x00queue.h | 4 ++-- drivers/net/wireless/rt2x00/rt61pci.c | 5 +++-- drivers/net/wireless/rt2x00/rt73usb.c | 2 +- 9 files changed, 14 insertions(+), 15 deletions(-) diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 08a4789fc2d8..6f898913492a 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1017,8 +1017,8 @@ static void rt2400pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_desc_write(entry_priv->desc, 1, word); rt2x00_desc_read(txd, 2, &word); - rt2x00_set_field32(&word, TXD_W2_BUFFER_LENGTH, skb->len); - rt2x00_set_field32(&word, TXD_W2_DATABYTE_COUNT, skb->len); + rt2x00_set_field32(&word, TXD_W2_BUFFER_LENGTH, txdesc->length); + rt2x00_set_field32(&word, TXD_W2_DATABYTE_COUNT, txdesc->length); rt2x00_desc_write(txd, 2, word); rt2x00_desc_read(txd, 3, &word); diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index d084d70e5fe2..d9b630455e7d 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1208,7 +1208,7 @@ static void rt2500pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); rt2x00_set_field32(&word, TXD_W0_RETRY_MODE, test_bit(ENTRY_TXD_RETRY_MODE, &txdesc->flags)); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, txdesc->length); rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, CIPHER_NONE); rt2x00_desc_write(txd, 0, word); } diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index c1eec17fe186..c6e6e7b0ea53 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1071,7 +1071,7 @@ static void rt2500usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_NEW_SEQ, test_bit(ENTRY_TXD_FIRST_FRAGMENT, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_IFS, txdesc->ifs); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, txdesc->length); rt2x00_set_field32(&word, TXD_W0_CIPHER, !!txdesc->cipher); rt2x00_set_field32(&word, TXD_W0_KEY_ID, txdesc->key_idx); rt2x00_desc_write(txd, 0, word); diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 89281d78f04d..f08b6a37bf2d 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -663,7 +663,7 @@ static int rt2800pci_write_tx_data(struct queue_entry* entry, test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ? txdesc->key_idx : 0xff); rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, - skb->len - txdesc->l2pad); + txdesc->length); rt2x00_set_field32(&word, TXWI_W1_PACKETID, skbdesc->entry->queue->qid + 1); rt2x00_desc_write(txwi, 1, word); diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 2b79d6e58f40..67f8234f24d0 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -437,7 +437,7 @@ static void rt2800usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, test_bit(ENTRY_TXD_ENCRYPT, &txdesc->flags) ? txdesc->key_idx : 0xff); rt2x00_set_field32(&word, TXWI_W1_MPDU_TOTAL_BYTE_COUNT, - skb->len - txdesc->l2pad); + txdesc->length); rt2x00_set_field32(&word, TXWI_W1_PACKETID, skbdesc->entry->queue->qid + 1); rt2x00_desc_write(txwi, 1, word); diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index a68cf90f6c4e..59d9459acfaf 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -333,12 +333,10 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, txdesc->aifs = entry->queue->aifs; /* - * Header and alignment information. + * Header and frame information. */ + txdesc->length = entry->skb->len; txdesc->header_length = ieee80211_get_hdrlen_from_skb(entry->skb); - if (test_bit(DRIVER_REQUIRE_L2PAD, &rt2x00dev->flags) && - (entry->skb->len > txdesc->header_length)) - txdesc->l2pad = L2PAD_SIZE(txdesc->header_length); /* * Check whether this frame is to be acked. diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.h b/drivers/net/wireless/rt2x00/rt2x00queue.h index f519aba4ff0f..94a48c174d67 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.h +++ b/drivers/net/wireless/rt2x00/rt2x00queue.h @@ -285,8 +285,8 @@ enum txentry_desc_flags { * * @flags: Descriptor flags (See &enum queue_entry_flags). * @queue: Queue identification (See &enum data_queue_qid). + * @length: Length of the entire frame. * @header_length: Length of 802.11 header. - * @l2pad: Amount of padding to align 802.11 payload to 4-byte boundrary. * @length_high: PLCP length high word. * @length_low: PLCP length low word. * @signal: PLCP signal. @@ -311,8 +311,8 @@ struct txentry_desc { enum data_queue_qid queue; + u16 length; u16 header_length; - u16 l2pad; u16 length_high; u16 length_low; diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index ac69dbe5719b..8099ecaf8694 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -1808,7 +1808,8 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, if (skbdesc->desc_len > TXINFO_SIZE) { rt2x00_desc_read(txd, 11, &word); - rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, skb->len); + rt2x00_set_field32(&word, TXD_W11_BUFFER_LENGTH0, + txdesc->length); rt2x00_desc_write(txd, 11, word); } @@ -1831,7 +1832,7 @@ static void rt61pci_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_KEY_TABLE, test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, txdesc->length); rt2x00_set_field32(&word, TXD_W0_BURST, test_bit(ENTRY_TXD_BURST, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher); diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index 7ebe14b64fe8..1399c18bc667 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -1494,7 +1494,7 @@ static void rt73usb_write_tx_desc(struct rt2x00_dev *rt2x00dev, rt2x00_set_field32(&word, TXD_W0_KEY_TABLE, test_bit(ENTRY_TXD_ENCRYPT_PAIRWISE, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_KEY_INDEX, txdesc->key_idx); - rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, skb->len); + rt2x00_set_field32(&word, TXD_W0_DATABYTE_COUNT, txdesc->length); rt2x00_set_field32(&word, TXD_W0_BURST2, test_bit(ENTRY_TXD_BURST, &txdesc->flags)); rt2x00_set_field32(&word, TXD_W0_CIPHER_ALG, txdesc->cipher); From c693bf90cf968204f46edb820269ed380d9b7bba Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 4 May 2010 15:46:15 -0400 Subject: [PATCH 107/109] rtl8180: use SET_IEEE80211_PERM_ADDR Signed-off-by: John W. Linville --- drivers/net/wireless/rtl818x/rtl8180_dev.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/rtl818x/rtl8180_dev.c b/drivers/net/wireless/rtl818x/rtl8180_dev.c index 4907fef011ad..093b93d62cc2 100644 --- a/drivers/net/wireless/rtl818x/rtl8180_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180_dev.c @@ -827,6 +827,7 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev, const char *chip_name, *rf_name = NULL; u32 reg; u16 eeprom_val; + u8 mac_addr[ETH_ALEN]; err = pci_enable_device(pdev); if (err) { @@ -987,12 +988,13 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev, eeprom_93cx6_read(&eeprom, 0x19, &priv->rfparam); } - eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)dev->wiphy->perm_addr, 3); - if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { + eeprom_93cx6_multiread(&eeprom, 0x7, (__le16 *)mac_addr, 3); + if (!is_valid_ether_addr(mac_addr)) { printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using" " randomly generated MAC addr\n", pci_name(pdev)); - random_ether_addr(dev->wiphy->perm_addr); + random_ether_addr(mac_addr); } + SET_IEEE80211_PERM_ADDR(dev, mac_addr); /* CCK TX power */ for (i = 0; i < 14; i += 2) { @@ -1024,7 +1026,7 @@ static int __devinit rtl8180_probe(struct pci_dev *pdev, } printk(KERN_INFO "%s: hwaddr %pM, %s + %s\n", - wiphy_name(dev->wiphy), dev->wiphy->perm_addr, + wiphy_name(dev->wiphy), mac_addr, chip_name, priv->rf->name); return 0; From f2c98382fee41848265c9bee1754b483045a740e Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 4 May 2010 15:48:48 -0400 Subject: [PATCH 108/109] rtl8187: use SET_IEEE80211_PERM_ADDR Signed-off-by: John W. Linville Acked-by: Hin-Tak Leung --- drivers/net/wireless/rtl818x/rtl8187_dev.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index 0fb850e0c656..ef66a5e60802 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -1332,6 +1332,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, u16 txpwr, reg; u16 product_id = le16_to_cpu(udev->descriptor.idProduct); int err, i; + u8 mac_addr[ETH_ALEN]; dev = ieee80211_alloc_hw(sizeof(*priv), &rtl8187_ops); if (!dev) { @@ -1389,12 +1390,13 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, udelay(10); eeprom_93cx6_multiread(&eeprom, RTL8187_EEPROM_MAC_ADDR, - (__le16 __force *)dev->wiphy->perm_addr, 3); - if (!is_valid_ether_addr(dev->wiphy->perm_addr)) { + (__le16 __force *)mac_addr, 3); + if (!is_valid_ether_addr(mac_addr)) { printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly " "generated MAC address\n"); - random_ether_addr(dev->wiphy->perm_addr); + random_ether_addr(mac_addr); } + SET_IEEE80211_PERM_ADDR(dev, mac_addr); channel = priv->channels; for (i = 0; i < 3; i++) { @@ -1525,7 +1527,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf, skb_queue_head_init(&priv->b_tx_status.queue); printk(KERN_INFO "%s: hwaddr %pM, %s V%d + %s, rfkill mask %d\n", - wiphy_name(dev->wiphy), dev->wiphy->perm_addr, + wiphy_name(dev->wiphy), mac_addr, chip_name, priv->asic_rev, priv->rf->name, priv->rfkill_mask); #ifdef CONFIG_RTL8187_LEDS From adfba3c7c026a6a5560d2a43fefc9b198cb74462 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 5 May 2010 15:33:55 +0200 Subject: [PATCH 109/109] mac80211: use fixed channel in ibss join when appropriate "mac80211: improve IBSS scanning" was missing a hunk. This adds that hunk as originally intended. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville --- net/mac80211/ibss.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index ba752362b2b2..d5855ae387e8 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -907,6 +907,12 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata, sdata->u.ibss.channel = params->channel; sdata->u.ibss.fixed_channel = params->channel_fixed; + /* fix ourselves to that channel now already */ + if (params->channel_fixed) { + sdata->local->oper_channel = params->channel; + sdata->local->oper_channel_type = NL80211_CHAN_NO_HT; + } + if (params->ie) { sdata->u.ibss.ie = kmemdup(params->ie, params->ie_len, GFP_KERNEL);