Merge 3.14-rc4 into tty-next

We want the tty revert here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Documentation/ABI/testing/sysfs-tty

@@ -3,8 +3,7 @@ Date:		Nov 2010
 Contact:	Kay Sievers <kay.sievers@vrfy.org>
 Description:
 		 Shows the list of currently configured
-		 tty devices used for the console,
+		 console devices, like 'tty1 ttyS0'.
-		 like 'tty1 ttyS0'.
 		 The last entry in the file is the active
 		 device connected to /dev/console.
 		 The file supports poll() to detect virtual

Documentation/PCI/MSI-HOWTO.txt

@@ -82,7 +82,19 @@ Most of the hard work is done for the driver in the PCI layer.  It simply
 has to request that the PCI layer set up the MSI capability for this
 device.
 
-4.2.1 pci_enable_msi_range
+4.2.1 pci_enable_msi
+
+int pci_enable_msi(struct pci_dev *dev)
+
+A successful call allocates ONE interrupt to the device, regardless
+of how many MSIs the device supports.  The device is switched from
+pin-based interrupt mode to MSI mode.  The dev->irq number is changed
+to a new number which represents the message signaled interrupt;
+consequently, this function should be called before the driver calls
+request_irq(), because an MSI is delivered via a vector that is
+different from the vector of a pin-based interrupt.
+
+4.2.2 pci_enable_msi_range
 
 int pci_enable_msi_range(struct pci_dev *dev, int minvec, int maxvec)
 
@@ -147,6 +159,11 @@ static int foo_driver_enable_msi(struct pci_dev *pdev, int nvec)
 	return pci_enable_msi_range(pdev, nvec, nvec);
 }
 
+Note, unlike pci_enable_msi_exact() function, which could be also used to
+enable a particular number of MSI-X interrupts, pci_enable_msi_range()
+returns either a negative errno or 'nvec' (not negative errno or 0 - as
+pci_enable_msi_exact() does).
+
 4.2.1.3 Single MSI mode
 
 The most notorious example of the request type described above is
@@ -158,7 +175,27 @@ static int foo_driver_enable_single_msi(struct pci_dev *pdev)
 	return pci_enable_msi_range(pdev, 1, 1);
 }
 
-4.2.2 pci_disable_msi
+Note, unlike pci_enable_msi() function, which could be also used to
+enable the single MSI mode, pci_enable_msi_range() returns either a
+negative errno or 1 (not negative errno or 0 - as pci_enable_msi()
+does).
+
+4.2.3 pci_enable_msi_exact
+
+int pci_enable_msi_exact(struct pci_dev *dev, int nvec)
+
+This variation on pci_enable_msi_range() call allows a device driver to
+request exactly 'nvec' MSIs.
+
+If this function returns a negative number, it indicates an error and
+the driver should not attempt to request any more MSI interrupts for
+this device.
+
+By contrast with pci_enable_msi_range() function, pci_enable_msi_exact()
+returns zero in case of success, which indicates MSI interrupts have been
+successfully allocated.
+
+4.2.4 pci_disable_msi
 
 void pci_disable_msi(struct pci_dev *dev)
 
@@ -172,7 +209,7 @@ on any interrupt for which it previously called request_irq().
 Failure to do so results in a BUG_ON(), leaving the device with
 MSI enabled and thus leaking its vector.
 
-4.2.3 pci_msi_vec_count
+4.2.4 pci_msi_vec_count
 
 int pci_msi_vec_count(struct pci_dev *dev)
 
@@ -257,7 +294,7 @@ possible, likely up to the limit returned by pci_msix_vec_count() function:
 
 static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
 {
-	return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,
+	return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
 				     1, nvec);
 }
 
@@ -269,7 +306,7 @@ In this case the function could look like this:
 
 static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
 {
-	return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,
+	return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
 				     FOO_DRIVER_MINIMUM_NVEC, nvec);
 }
 
@@ -282,10 +319,15 @@ parameters:
 
 static int foo_driver_enable_msix(struct foo_adapter *adapter, int nvec)
 {
-	return pci_enable_msi_range(adapter->pdev, adapter->msix_entries,
+	return pci_enable_msix_range(adapter->pdev, adapter->msix_entries,
 				     nvec, nvec);
 }
 
+Note, unlike pci_enable_msix_exact() function, which could be also used to
+enable a particular number of MSI-X interrupts, pci_enable_msix_range()
+returns either a negative errno or 'nvec' (not negative errno or 0 - as
+pci_enable_msix_exact() does).
+
 4.3.1.3 Specific requirements to the number of MSI-X interrupts
 
 As noted above, there could be devices that can not operate with just any
@@ -332,7 +374,64 @@ Note how pci_enable_msix_range() return value is analized for a fallback -
 any error code other than -ENOSPC indicates a fatal error and should not
 be retried.
 
-4.3.2 pci_disable_msix
+4.3.2 pci_enable_msix_exact
+
+int pci_enable_msix_exact(struct pci_dev *dev,
+			  struct msix_entry *entries, int nvec)
+
+This variation on pci_enable_msix_range() call allows a device driver to
+request exactly 'nvec' MSI-Xs.
+
+If this function returns a negative number, it indicates an error and
+the driver should not attempt to allocate any more MSI-X interrupts for
+this device.
+
+By contrast with pci_enable_msix_range() function, pci_enable_msix_exact()
+returns zero in case of success, which indicates MSI-X interrupts have been
+successfully allocated.
+
+Another version of a routine that enables MSI-X mode for a device with
+specific requirements described in chapter 4.3.1.3 might look like this:
+
+/*
+ * Assume 'minvec' and 'maxvec' are non-zero
+ */
+static int foo_driver_enable_msix(struct foo_adapter *adapter,
+				  int minvec, int maxvec)
+{
+	int rc;
+
+	minvec = roundup_pow_of_two(minvec);
+	maxvec = rounddown_pow_of_two(maxvec);
+
+	if (minvec > maxvec)
+		return -ERANGE;
+
+retry:
+	rc = pci_enable_msix_exact(adapter->pdev,
+				   adapter->msix_entries, maxvec);
+
+	/*
+	 * -ENOSPC is the only error code allowed to be analyzed
+	 */
+	if (rc == -ENOSPC) {
+		if (maxvec == 1)
+			return -ENOSPC;
+
+		maxvec /= 2;
+
+		if (minvec > maxvec)
+			return -ENOSPC;
+
+		goto retry;
+	} else if (rc < 0) {
+		return rc;
+	}
+
+	return maxvec;
+}
+
+4.3.3 pci_disable_msix
 
 void pci_disable_msix(struct pci_dev *dev)
 

Documentation/devicetree/bindings/arm/omap/omap.txt

@@ -91,7 +91,7 @@ Boards:
   compatible = "ti,omap3-beagle", "ti,omap3"
 
 - OMAP3 Tobi with Overo : Commercial expansion board with daughter board
-  compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"
+  compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3"
 
 - OMAP4 SDP : Software Development Board
   compatible = "ti,omap4-sdp", "ti,omap4430"

Documentation/devicetree/bindings/net/sti-dwmac.txt

@@ -0,0 +1,58 @@
+STMicroelectronics SoC DWMAC glue layer controller
+
+The device node has following properties.
+
+Required properties:
+ - compatible	: Can be "st,stih415-dwmac", "st,stih416-dwmac" or
+   "st,stid127-dwmac".
+ - reg		: Offset of the glue configuration register map in system
+   configuration regmap pointed by st,syscon property and size.
+
+ - reg-names	: Should be "sti-ethconf".
+
+ - st,syscon	: Should be phandle to system configuration node which
+   encompases this glue registers.
+
+ - st,tx-retime-src: On STi Parts for Giga bit speeds, 125Mhz clocks can be
+   wired up in from different sources. One via TXCLK pin and other via CLK_125
+   pin. This wiring is totally board dependent. However the retiming glue
+   logic should be configured accordingly. Possible values for this property
+
+	   "txclk" - if 125Mhz clock is wired up via txclk line.
+	   "clk_125" - if 125Mhz clock is wired up via clk_125 line.
+
+   This property is only valid for Giga bit setup( GMII, RGMII), and it is
+   un-used for non-giga bit (MII and RMII) setups. Also note that internal
+   clockgen can not generate stable 125Mhz clock.
+
+ - st,ext-phyclk: This boolean property indicates who is generating the clock
+  for tx and rx. This property is only valid for RMII case where the clock can
+  be generated from the MAC or PHY.
+
+ - clock-names: should be "sti-ethclk".
+ - clocks: Should point to ethernet clockgen which can generate phyclk.
+
+
+Example:
+
+ethernet0: dwmac@fe810000 {
+	device_type 	= "network";
+	compatible	= "st,stih416-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+	reg 		= <0xfe810000 0x8000>, <0x8bc 0x4>;
+	reg-names	= "stmmaceth", "sti-ethconf";
+	interrupts	= <0 133 0>, <0 134 0>, <0 135 0>;
+	interrupt-names	= "macirq", "eth_wake_irq", "eth_lpi";
+	phy-mode	= "mii";
+
+	st,syscon	= <&syscfg_rear>;
+
+	snps,pbl 	= <32>;
+	snps,mixed-burst;
+
+	resets		= <&softreset STIH416_ETH0_SOFTRESET>;
+	reset-names	= "stmmaceth";
+	pinctrl-0	= <&pinctrl_mii0>;
+	pinctrl-names 	= "default";
+	clocks		= <&CLK_S_GMAC0_PHY>;
+	clock-names	= "stmmaceth";
+};

Documentation/networking/3c505.txt

@@ -1,45 +0,0 @@
-The 3Com Etherlink Plus (3c505) driver.
-
-This driver now uses DMA.  There is currently no support for PIO operation.
-The default DMA channel is 6; this is _not_ autoprobed, so you must
-make sure you configure it correctly.  If loading the driver as a
-module, you can do this with "modprobe 3c505 dma=n".  If the driver is
-linked statically into the kernel, you must either use an "ether="
-statement on the command line, or change the definition of ELP_DMA in 3c505.h.
-
-The driver will warn you if it has to fall back on the compiled in
-default DMA channel. 
-
-If no base address is given at boot time, the driver will autoprobe
-ports 0x300, 0x280 and 0x310 (in that order).  If no IRQ is given, the driver
-will try to probe for it.
-
-The driver can be used as a loadable module.
-
-Theoretically, one instance of the driver can now run multiple cards,
-in the standard way (when loading a module, say "modprobe 3c505
-io=0x300,0x340 irq=10,11 dma=6,7" or whatever).  I have not tested
-this, though.
-
-The driver may now support revision 2 hardware; the dependency on
-being able to read the host control register has been removed.  This
-is also untested, since I don't have a suitable card.
-
-Known problems:
- I still see "DMA upload timed out" messages from time to time.  These
-seem to be fairly non-fatal though.
- The card is old and slow.
-
-To do:
- Improve probe/setup code
- Test multicast and promiscuous operation
-
-Authors:
- The driver is mainly written by Craig Southeren, email
- <craigs@ineluki.apana.org.au>.
- Parts of the driver (adapting the driver to 1.1.4+ kernels,
- IRQ/address detection, some changes) and this README by
- Juha Laiho <jlaiho@ichaos.nullnet.fi>.
- DMA mode, more fixes, etc, by Philip Blundell <pjb27@cam.ac.uk>
- Multicard support, Software configurable DMA, etc., by
- Christopher Collins <ccollins@pcug.org.au>

MAINTAINERS

@@ -1860,6 +1860,7 @@ F:	drivers/net/ethernet/broadcom/bnx2x/
 
 BROADCOM BCM281XX/BCM11XXX ARM ARCHITECTURE
 M:	Christian Daudt <bcm@fixthebug.org>
+M:	Matt Porter <mporter@linaro.org>
 L:	bcm-kernel-feedback-list@broadcom.com
 T:	git git://git.github.com/broadcom/bcm11351
 S:	Maintained
@@ -2408,8 +2409,10 @@ F:	tools/power/cpupower/
 
 CPUSETS
 M:	Li Zefan <lizefan@huawei.com>
+L:	cgroups@vger.kernel.org
 W:	http://www.bullopensource.org/cpuset/
 W:	http://oss.sgi.com/projects/cpusets/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup.git
 S:	Maintained
 F:	Documentation/cgroups/cpusets.txt
 F:	include/linux/cpuset.h
@@ -3324,6 +3327,17 @@ S:	Maintained
 F:	include/linux/netfilter_bridge/
 F:	net/bridge/
 
+ETHERNET PHY LIBRARY
+M:	Florian Fainelli <f.fainelli@gmail.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	include/linux/phy.h
+F:	include/linux/phy_fixed.h
+F:	drivers/net/phy/
+F:	Documentation/networking/phy.txt
+F:	drivers/of/of_mdio.c
+F:	drivers/of/of_net.c
+
 EXT2 FILE SYSTEM
 M:	Jan Kara <jack@suse.cz>
 L:	linux-ext4@vger.kernel.org
@@ -9715,7 +9729,6 @@ F:	drivers/xen/*swiotlb*
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
 M:	Dave Chinner <david@fromorbit.com>
-M:	Ben Myers <bpm@sgi.com>
 M:	xfs@oss.sgi.com
 L:	xfs@oss.sgi.com
 W:	http://oss.sgi.com/projects/xfs

Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 14
 SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Shuffling Zombie Juror
 
 # *DOCUMENTATION*

arch/arm/boot/dts/Makefile

@@ -209,7 +209,8 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
 	omap3-n900.dtb \
 	omap3-n9.dtb \
 	omap3-n950.dtb \
-	omap3-tobi.dtb \
+	omap3-overo-tobi.dtb \
+	omap3-overo-storm-tobi.dtb \
 	omap3-gta04.dtb \
 	omap3-igep0020.dtb \
 	omap3-igep0030.dtb \

arch/arm/boot/dts/am335x-evmsk.dts

@@ -121,7 +121,7 @@
 		ti,model = "AM335x-EVMSK";
 		ti,audio-codec = <&tlv320aic3106>;
 		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <24576000>;
+		ti,codec-clock-rate = <24000000>;
 		ti,audio-routing =
 			"Headphone Jack",       "HPLOUT",
 			"Headphone Jack",       "HPROUT";
@@ -256,6 +256,12 @@
 		>;
 	};
 
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
+		>;
+	};
+
 	mcasp1_pins: mcasp1_pins {
 		pinctrl-single,pins = <
 			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
@@ -456,6 +462,9 @@
 	status = "okay";
 	vmmc-supply = <&vmmc_reg>;
 	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>;
 };
 
 &sham {

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -23,6 +23,7 @@
 		gpio0 = &gpio0;
 		gpio1 = &gpio1;
 		gpio2 = &gpio2;
+		eth3 = &eth3;
 	};
 
 	cpus {
@@ -291,7 +292,7 @@
 				interrupts = <91>;
 			};
 
-			ethernet@34000 {
+			eth3: ethernet@34000 {
 				compatible = "marvell,armada-370-neta";
 				reg = <0x34000 0x4000>;
 				interrupts = <14>;

arch/arm/boot/dts/dove.dtsi

@@ -379,15 +379,6 @@
 				#clock-cells = <1>;
 			};
 
-			pmu_intc: pmu-interrupt-ctrl@d0050 {
-				compatible = "marvell,dove-pmu-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0xd0050 0x8>;
-				interrupts = <33>;
-				marvell,#interrupts = <7>;
-			};
-
 			pinctrl: pin-ctrl@d0200 {
 				compatible = "marvell,dove-pinctrl";
 				reg = <0xd0200 0x10>;
@@ -610,8 +601,6 @@
 			rtc: real-time-clock@d8500 {
 				compatible = "marvell,orion-rtc";
 				reg = <0xd8500 0x20>;
-				interrupt-parent = <&pmu_intc>;
-				interrupts = <5>;
 			};
 
 			gpio2: gpio-ctrl@e8400 {

arch/arm/boot/dts/imx6dl-hummingboard.dts

@@ -52,12 +52,6 @@
 		};
 	};
 
-	codec: spdif-transmitter {
-		compatible = "linux,spdif-dit";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_hummingboard_spdif>;
-	};
-
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "imx-spdif";
@@ -111,7 +105,7 @@
 		};
 
 		pinctrl_hummingboard_spdif: hummingboard-spdif {
-			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>;
+			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
 		};
 
 		pinctrl_hummingboard_usbh1_vbus: hummingboard-usbh1-vbus {
@@ -142,6 +136,8 @@
 };
 
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hummingboard_spdif>;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl-cubox-i.dtsi

@@ -46,12 +46,6 @@
 		};
 	};
 
-	codec: spdif-transmitter {
-		compatible = "linux,spdif-dit";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_cubox_i_spdif>;
-	};
-
 	sound-spdif {
 		compatible = "fsl,imx-audio-spdif";
 		model = "imx-spdif";
@@ -89,7 +83,7 @@
 		};
 
 		pinctrl_cubox_i_spdif: cubox-i-spdif {
-			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x1b0b0>;
+			fsl,pins = <MX6QDL_PAD_GPIO_17__SPDIF_OUT 0x13091>;
 		};
 
 		pinctrl_cubox_i_usbh1_vbus: cubox-i-usbh1-vbus {
@@ -121,6 +115,8 @@
 };
 
 &spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_cubox_i_spdif>;
 	status = "okay";
 };
 

arch/arm/boot/dts/omap3-gta04.dts

@@ -32,7 +32,7 @@
 		aux-button {
 			label = "aux";
 			linux,code = <169>;
-			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
 			gpio-key,wakeup;
 		};
 	};
@@ -92,6 +92,8 @@
 	bmp085@77 {
 		compatible = "bosch,bmp085";
 		reg = <0x77>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
 	};
 
 	/* leds */
@@ -141,8 +143,8 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	vmmc-supply = <&vmmc1>;
-	vmmc_aux-supply = <&vsim>;
 	bus-width = <4>;
+	ti,non-removable;
 };
 
 &mmc2 {

arch/arm/boot/dts/omap3-n9.dts

@@ -14,5 +14,5 @@
 
 / {
 	model = "Nokia N9";
-	compatible = "nokia,omap3-n9", "ti,omap3";
+	compatible = "nokia,omap3-n9", "ti,omap36xx", "ti,omap3";
 };

arch/arm/boot/dts/omap3-n900.dts

@@ -1,6 +1,6 @@
 /*
  * Copyright (C) 2013 Pavel Machek <pavel@ucw.cz>
- * Copyright 2013 Aaro Koskinen <aaro.koskinen@iki.fi>
+ * Copyright (C) 2013-2014 Aaro Koskinen <aaro.koskinen@iki.fi>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 (or later) as
@@ -13,7 +13,7 @@
 
 / {
 	model = "Nokia N900";
-	compatible = "nokia,omap3-n900", "ti,omap3";
+	compatible = "nokia,omap3-n900", "ti,omap3430", "ti,omap3";
 
 	cpus {
 		cpu@0 {

arch/arm/boot/dts/omap3-n950.dts

@@ -14,5 +14,5 @@
 
 / {
 	model = "Nokia N950";
-	compatible = "nokia,omap3-n950", "ti,omap3";
+	compatible = "nokia,omap3-n950", "ti,omap36xx", "ti,omap3";
 };

arch/arm/boot/dts/omap3-overo-storm-tobi.dts

@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap36xx.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+	model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Tobi";
+	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3";
+};
+

arch/arm/boot/dts/omap3-overo-tobi-common.dtsi

@@ -13,9 +13,6 @@
 #include "omap3-overo.dtsi"
 
 / {
-	model = "TI OMAP3 Gumstix Overo on Tobi";
-	compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3";
-
 	leds {
 		compatible = "gpio-leds";
 		heartbeat {

arch/arm/boot/dts/omap3-overo-tobi.dts

@@ -0,0 +1,22 @@
+/*
+ * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * Tobi expansion board is manufactured by Gumstix Inc.
+ */
+
+/dts-v1/;
+
+#include "omap34xx.dtsi"
+#include "omap3-overo-tobi-common.dtsi"
+
+/ {
+	model = "OMAP35xx Gumstix Overo on Tobi";
+	compatible = "gumstix,omap3-overo-tobi", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3";
+};
+

arch/arm/boot/dts/omap3-overo.dtsi

@@ -9,9 +9,6 @@
 /*
  * The Gumstix Overo must be combined with an expansion board.
  */
-/dts-v1/;
-
-#include "omap34xx.dtsi"
 
 / {
 	pwmleds {

arch/arm/boot/dts/tegra114.dtsi

@@ -57,6 +57,8 @@
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
 
+			nvidia,head = <0>;
+
 			rgb {
 				status = "disabled";
 			};
@@ -72,6 +74,8 @@
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
 
+			nvidia,head = <1>;
+
 			rgb {
 				status = "disabled";
 			};

arch/arm/boot/dts/tegra20.dtsi

@@ -94,6 +94,8 @@
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
 
+			nvidia,head = <0>;
+
 			rgb {
 				status = "disabled";
 			};
@@ -109,6 +111,8 @@
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
 
+			nvidia,head = <1>;
+
 			rgb {
 				status = "disabled";
 			};

arch/arm/boot/dts/tegra30-cardhu.dtsi

@@ -28,7 +28,7 @@
 	compatible = "nvidia,cardhu", "nvidia,tegra30";
 
 	aliases {
-		rtc0 = "/i2c@7000d000/tps6586x@34";
+		rtc0 = "/i2c@7000d000/tps65911@2d";
 		rtc1 = "/rtc@7000e000";
 	};
 

arch/arm/boot/dts/tegra30.dtsi

@@ -170,6 +170,8 @@
 			resets = <&tegra_car 27>;
 			reset-names = "dc";
 
+			nvidia,head = <0>;
+
 			rgb {
 				status = "disabled";
 			};
@@ -185,6 +187,8 @@
 			resets = <&tegra_car 26>;
 			reset-names = "dc";
 
+			nvidia,head = <1>;
+
 			rgb {
 				status = "disabled";
 			};

arch/arm/boot/dts/testcases/tests.dtsi

@@ -1,2 +0,0 @@
-/include/ "tests-phandle.dtsi"
-/include/ "tests-interrupts.dtsi"

arch/arm/boot/dts/versatile-pb.dts

@@ -1,4 +1,4 @@
-/include/ "versatile-ab.dts"
+#include <versatile-ab.dts>
 
 / {
 	model = "ARM Versatile PB";
@@ -47,4 +47,4 @@
 	};
 };
 
-/include/ "testcases/tests.dtsi"
+#include <testcases.dtsi>

arch/arm/include/asm/cacheflush.h

@@ -212,6 +212,7 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *,
 static inline void __flush_icache_all(void)
 {
 	__flush_icache_preferred();
+	dsb();
 }
 
 /*

arch/arm/include/asm/pgtable-3level.h

@@ -120,9 +120,12 @@
 /*
  * 2nd stage PTE definitions for LPAE.
  */
-#define L_PTE_S2_MT_UNCACHED	 (_AT(pteval_t, 0x5) << 2) /* MemAttr[3:0] */
+#define L_PTE_S2_MT_UNCACHED		(_AT(pteval_t, 0x0) << 2) /* strongly ordered */
-#define L_PTE_S2_MT_WRITETHROUGH (_AT(pteval_t, 0xa) << 2) /* MemAttr[3:0] */
+#define L_PTE_S2_MT_WRITETHROUGH	(_AT(pteval_t, 0xa) << 2) /* normal inner write-through */
-#define L_PTE_S2_MT_WRITEBACK	 (_AT(pteval_t, 0xf) << 2) /* MemAttr[3:0] */
+#define L_PTE_S2_MT_WRITEBACK		(_AT(pteval_t, 0xf) << 2) /* normal inner write-back */
+#define L_PTE_S2_MT_DEV_SHARED		(_AT(pteval_t, 0x1) << 2) /* device */
+#define L_PTE_S2_MT_MASK		(_AT(pteval_t, 0xf) << 2)
+
 #define L_PTE_S2_RDONLY			(_AT(pteval_t, 1) << 6)   /* HAP[1]   */
 #define L_PTE_S2_RDWR			(_AT(pteval_t, 3) << 6)   /* HAP[2:1] */
 

arch/arm/include/asm/spinlock.h

@@ -37,18 +37,9 @@
 
 static inline void dsb_sev(void)
 {
-#if __LINUX_ARM_ARCH__ >= 7
+
-	__asm__ __volatile__ (
+	dsb(ishst);
-		"dsb ishst\n"
+	__asm__(SEV);
-		SEV
-	);
-#else
-	__asm__ __volatile__ (
-		"mcr p15, 0, %0, c7, c10, 4\n"
-		SEV
-		: : "r" (0)
-	);
-#endif
 }
 
 /*

arch/arm/kernel/setup.c

@@ -731,7 +731,7 @@ static void __init request_standard_resources(const struct machine_desc *mdesc)
 	kernel_data.end     = virt_to_phys(_end - 1);
 
 	for_each_memblock(memory, region) {
-		res = memblock_virt_alloc_low(sizeof(*res), 0);
+		res = memblock_virt_alloc(sizeof(*res), 0);
 		res->name  = "System RAM";
 		res->start = __pfn_to_phys(memblock_region_memory_base_pfn(region));
 		res->end = __pfn_to_phys(memblock_region_memory_end_pfn(region)) - 1;

arch/arm/mach-imx/Makefile

@@ -101,11 +101,9 @@ obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 obj-$(CONFIG_SOC_IMX6SL) += clk-imx6sl.o mach-imx6sl.o
 
-ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
 # i.MX6SL reuses i.MX6Q code
 obj-$(CONFIG_SOC_IMX6SL) += pm-imx6q.o headsmp.o
-endif
 
 # i.MX5 based machines
 obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o

arch/arm/mach-imx/common.h

@@ -144,13 +144,11 @@ void imx6q_set_chicken_bit(void);
 void imx_cpu_die(unsigned int cpu);
 int imx_cpu_kill(unsigned int cpu);
 
-#ifdef CONFIG_PM
 void imx6q_pm_init(void);
 void imx6q_pm_set_ccm_base(void __iomem *base);
+#ifdef CONFIG_PM
 void imx5_pm_init(void);
 #else
-static inline void imx6q_pm_init(void) {}
-static inline void imx6q_pm_set_ccm_base(void __iomem *base) {}
 static inline void imx5_pm_init(void) {}
 #endif
 

arch/arm/mach-omap1/board-nokia770.c

@@ -156,6 +156,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
 	.register_dev	= 1,
 	.hmc_mode	= 16,
 	.pins[0]	= 6,
+	.extcon		= "tahvo-usb",
 };
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)

arch/arm/mach-omap2/Kconfig

@@ -50,6 +50,7 @@ config SOC_OMAP5
 	bool "TI OMAP5"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
+	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select CPU_V7
@@ -63,6 +64,7 @@ config SOC_AM33XX
 	bool "TI AM33XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
+	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select CPU_V7
 	select MULTI_IRQ_HANDLER
@@ -72,6 +74,7 @@ config SOC_AM43XX
 	depends on ARCH_MULTI_V7
 	select CPU_V7
 	select ARCH_OMAP2PLUS
+	select ARCH_HAS_OPP
 	select MULTI_IRQ_HANDLER
 	select ARM_GIC
 	select MACH_OMAP_GENERIC
@@ -80,6 +83,7 @@ config SOC_DRA7XX
 	bool "TI DRA7XX"
 	depends on ARCH_MULTI_V7
 	select ARCH_OMAP2PLUS
+	select ARCH_HAS_OPP
 	select ARM_CPU_SUSPEND if PM
 	select ARM_GIC
 	select CPU_V7
@@ -268,9 +272,6 @@ config MACH_OMAP_3430SDP
 	default y
 	select OMAP_PACKAGE_CBB
 
-config MACH_NOKIA_N800
-       bool
-
 config MACH_NOKIA_N810
        bool
 
@@ -281,7 +282,6 @@ config MACH_NOKIA_N8X0
 	bool "Nokia N800/N810"
 	depends on SOC_OMAP2420
 	default y
-	select MACH_NOKIA_N800
 	select MACH_NOKIA_N810
 	select MACH_NOKIA_N810_WIMAX
 	select OMAP_PACKAGE_ZAC

arch/arm/mach-omap2/gpmc.c

@@ -1339,7 +1339,7 @@ static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
 		of_property_read_bool(np, "gpmc,time-para-granularity");
 }
 
-#ifdef CONFIG_MTD_NAND
+#if IS_ENABLED(CONFIG_MTD_NAND)
 
 static const char * const nand_xfer_types[] = {
 	[NAND_OMAP_PREFETCH_POLLED]		= "prefetch-polled",
@@ -1429,7 +1429,7 @@ static int gpmc_probe_nand_child(struct platform_device *pdev,
 }
 #endif
 
-#ifdef CONFIG_MTD_ONENAND
+#if IS_ENABLED(CONFIG_MTD_ONENAND)
 static int gpmc_probe_onenand_child(struct platform_device *pdev,
 				 struct device_node *child)
 {

arch/arm/mach-omap2/io.c

@@ -179,15 +179,6 @@ static struct map_desc omap34xx_io_desc[] __initdata = {
 		.length		= L4_EMU_34XX_SIZE,
 		.type		= MT_DEVICE
 	},
-#if defined(CONFIG_DEBUG_LL) &&							\
-	(defined(CONFIG_MACH_OMAP_ZOOM2) || defined(CONFIG_MACH_OMAP_ZOOM3))
-	{
-		.virtual	= ZOOM_UART_VIRT,
-		.pfn		= __phys_to_pfn(ZOOM_UART_BASE),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	},
-#endif
 };
 #endif
 

arch/arm/mach-pxa/mioa701.c

@@ -38,6 +38,7 @@
 #include <linux/mtd/physmap.h>
 #include <linux/usb/gpio_vbus.h>
 #include <linux/reboot.h>
+#include <linux/regulator/fixed.h>
 #include <linux/regulator/max1586.h>
 #include <linux/slab.h>
 #include <linux/i2c/pxa-i2c.h>
@@ -714,6 +715,10 @@ static struct gpio global_gpios[] = {
 	{ GPIO56_MT9M111_nOE, GPIOF_OUT_INIT_LOW, "Camera nOE" },
 };
 
+static struct regulator_consumer_supply fixed_5v0_consumers[] = {
+	REGULATOR_SUPPLY("power", "pwm-backlight"),
+};
+
 static void __init mioa701_machine_init(void)
 {
 	int rc;
@@ -753,6 +758,10 @@ static void __init mioa701_machine_init(void)
 	pxa_set_i2c_info(&i2c_pdata);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_camera_info(&mioa701_pxacamera_platform_data);
+
+	regulator_register_always_on(0, "fixed-5.0V", fixed_5v0_consumers,
+				     ARRAY_SIZE(fixed_5v0_consumers),
+				     5000000);
 }
 
 static void mioa701_machine_exit(void)

arch/arm/mach-tegra/pm.c

@@ -24,6 +24,7 @@
 #include <linux/cpu_pm.h>
 #include <linux/suspend.h>
 #include <linux/err.h>
+#include <linux/slab.h>
 #include <linux/clk/tegra.h>
 
 #include <asm/smp_plat.h>

arch/arm/mach-tegra/tegra.c

@@ -73,10 +73,20 @@ u32 tegra_uart_config[3] = {
 static void __init tegra_init_cache(void)
 {
 #ifdef CONFIG_CACHE_L2X0
+	static const struct of_device_id pl310_ids[] __initconst = {
+		{ .compatible = "arm,pl310-cache",  },
+		{}
+	};
+
+	struct device_node *np;
 	int ret;
 	void __iomem *p = IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x3000;
 	u32 aux_ctrl, cache_type;
 
+	np = of_find_matching_node(NULL, pl310_ids);
+	if (!np)
+		return;
+
 	cache_type = readl(p + L2X0_CACHE_TYPE);
 	aux_ctrl = (cache_type & 0x700) << (17-8);
 	aux_ctrl |= 0x7C400001;

arch/arm/mm/dma-mapping.c

@@ -1358,7 +1358,7 @@ static void *arm_iommu_alloc_attrs(struct device *dev, size_t size,
 	*handle = DMA_ERROR_CODE;
 	size = PAGE_ALIGN(size);
 
-	if (gfp & GFP_ATOMIC)
+	if (!(gfp & __GFP_WAIT))
 		return __iommu_alloc_atomic(dev, size, handle);
 
 	/*

arch/arm/mm/mm.h

@@ -38,6 +38,7 @@ static inline pmd_t *pmd_off_k(unsigned long virt)
 
 struct mem_type {
 	pteval_t prot_pte;
+	pteval_t prot_pte_s2;
 	pmdval_t prot_l1;
 	pmdval_t prot_sect;
 	unsigned int domain;

arch/arm/mm/mmu.c

@@ -232,12 +232,16 @@ __setup("noalign", noalign_setup);
 #endif /* ifdef CONFIG_CPU_CP15 / else */
 
 #define PROT_PTE_DEVICE		L_PTE_PRESENT|L_PTE_YOUNG|L_PTE_DIRTY|L_PTE_XN
+#define PROT_PTE_S2_DEVICE	PROT_PTE_DEVICE
 #define PROT_SECT_DEVICE	PMD_TYPE_SECT|PMD_SECT_AP_WRITE
 
 static struct mem_type mem_types[] = {
 	[MT_DEVICE] = {		  /* Strongly ordered / ARMv6 shared device */
 		.prot_pte	= PROT_PTE_DEVICE | L_PTE_MT_DEV_SHARED |
 				  L_PTE_SHARED,
+		.prot_pte_s2	= s2_policy(PROT_PTE_S2_DEVICE) |
+				  s2_policy(L_PTE_S2_MT_DEV_SHARED) |
+				  L_PTE_SHARED,
 		.prot_l1	= PMD_TYPE_TABLE,
 		.prot_sect	= PROT_SECT_DEVICE | PMD_SECT_S,
 		.domain		= DOMAIN_IO,
@@ -508,7 +512,8 @@ static void __init build_mem_type_table(void)
 	cp = &cache_policies[cachepolicy];
 	vecs_pgprot = kern_pgprot = user_pgprot = cp->pte;
 	s2_pgprot = cp->pte_s2;
-	hyp_device_pgprot = s2_device_pgprot = mem_types[MT_DEVICE].prot_pte;
+	hyp_device_pgprot = mem_types[MT_DEVICE].prot_pte;
+	s2_device_pgprot = mem_types[MT_DEVICE].prot_pte_s2;
 
 	/*
 	 * ARMv6 and above have extended page tables.

arch/arm/mm/proc-v6.S

@@ -208,7 +208,6 @@ __v6_setup:
 	mcr	p15, 0, r0, c7, c14, 0		@ clean+invalidate D cache
 	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
 	mcr	p15, 0, r0, c7, c15, 0		@ clean+invalidate cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
 	mcr	p15, 0, r0, c2, c0, 2		@ TTB control register
@@ -218,6 +217,8 @@ __v6_setup:
 	ALT_UP(orr	r8, r8, #TTB_FLAGS_UP)
 	mcr	p15, 0, r8, c2, c0, 1		@ load TTB1
 #endif /* CONFIG_MMU */
+	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer and
+						@ complete invalidations
 	adr	r5, v6_crval
 	ldmia	r5, {r5, r6}
  ARM_BE8(orr	r6, r6, #1 << 25)		@ big-endian page tables

arch/arm/mm/proc-v7.S

@@ -351,7 +351,6 @@ __v7_setup:
 
 4:	mov	r10, #0
 	mcr	p15, 0, r10, c7, c5, 0		@ I+BTB cache invalidate
-	dsb
 #ifdef CONFIG_MMU
 	mcr	p15, 0, r10, c8, c7, 0		@ invalidate I + D TLBs
 	v7_ttb_setup r10, r4, r8, r5		@ TTBCR, TTBRx setup
@@ -360,6 +359,7 @@ __v7_setup:
 	mcr	p15, 0, r5, c10, c2, 0		@ write PRRR
 	mcr	p15, 0, r6, c10, c2, 1		@ write NMRR
 #endif
+	dsb					@ Complete invalidations
 #ifndef CONFIG_ARM_THUMBEE
 	mrc	p15, 0, r0, c0, c1, 0		@ read ID_PFR0 for ThumbEE
 	and	r0, r0, #(0xf << 12)		@ ThumbEE enabled field

arch/avr32/Makefile

@@ -11,7 +11,7 @@ all: uImage vmlinux.elf
 
 KBUILD_DEFCONFIG	:= atstk1002_defconfig
 
-KBUILD_CFLAGS	+= -pipe -fno-builtin -mno-pic
+KBUILD_CFLAGS	+= -pipe -fno-builtin -mno-pic -D__linux__
 KBUILD_AFLAGS	+= -mrelax -mno-pic
 KBUILD_CFLAGS_MODULE += -mno-relax
 LDFLAGS_vmlinux	+= --relax

arch/avr32/boards/mimc200/fram.c

@@ -11,6 +11,7 @@
 #define FRAM_VERSION	"1.0"
 
 #include <linux/miscdevice.h>
+#include <linux/module.h>
 #include <linux/proc_fs.h>
 #include <linux/mm.h>
 #include <linux/io.h>

arch/avr32/include/asm/Kbuild

@@ -17,5 +17,6 @@ generic-y       += scatterlist.h
 generic-y       += sections.h
 generic-y       += topology.h
 generic-y	+= trace_clock.h
+generic-y += vga.h
 generic-y       += xor.h
 generic-y	+= hash.h

arch/avr32/include/asm/io.h

@@ -295,6 +295,8 @@ extern void __iounmap(void __iomem *addr);
 #define iounmap(addr)				\
 	__iounmap(addr)
 
+#define ioremap_wc ioremap_nocache
+
 #define cached(addr) P1SEGADDR(addr)
 #define uncached(addr) P2SEGADDR(addr)
 

arch/powerpc/include/asm/eeh.h

@@ -172,10 +172,20 @@ struct eeh_ops {
 };
 
 extern struct eeh_ops *eeh_ops;
-extern int eeh_subsystem_enabled;
+extern bool eeh_subsystem_enabled;
 extern raw_spinlock_t confirm_error_lock;
 extern int eeh_probe_mode;
 
+static inline bool eeh_enabled(void)
+{
+	return eeh_subsystem_enabled;
+}
+
+static inline void eeh_set_enable(bool mode)
+{
+	eeh_subsystem_enabled = mode;
+}
+
 #define EEH_PROBE_MODE_DEV	(1<<0)	/* From PCI device	*/
 #define EEH_PROBE_MODE_DEVTREE	(1<<1)	/* From device tree	*/
 
@@ -246,7 +256,7 @@ void eeh_remove_device(struct pci_dev *);
  * If this macro yields TRUE, the caller relays to eeh_check_failure()
  * which does further tests out of line.
  */
-#define EEH_POSSIBLE_ERROR(val, type)	((val) == (type)~0 && eeh_subsystem_enabled)
+#define EEH_POSSIBLE_ERROR(val, type)	((val) == (type)~0 && eeh_enabled())
 
 /*
  * Reads from a device which has been isolated by EEH will return
@@ -257,6 +267,13 @@ void eeh_remove_device(struct pci_dev *);
 
 #else /* !CONFIG_EEH */
 
+static inline bool eeh_enabled(void)
+{
+        return false;
+}
+
+static inline void eeh_set_enable(bool mode) { }
+
 static inline int eeh_init(void)
 {
 	return 0;

arch/powerpc/include/asm/hugetlb.h

@@ -127,7 +127,7 @@ static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm,
 					    unsigned long addr, pte_t *ptep)
 {
 #ifdef CONFIG_PPC64
-	return __pte(pte_update(mm, addr, ptep, ~0UL, 1));
+	return __pte(pte_update(mm, addr, ptep, ~0UL, 0, 1));
 #else
 	return __pte(pte_update(ptep, ~0UL, 0));
 #endif

arch/powerpc/include/asm/pgtable-ppc64.h

@@ -195,6 +195,7 @@ extern void hpte_need_flush(struct mm_struct *mm, unsigned long addr,
 static inline unsigned long pte_update(struct mm_struct *mm,
 				       unsigned long addr,
 				       pte_t *ptep, unsigned long clr,
+				       unsigned long set,
 				       int huge)
 {
 #ifdef PTE_ATOMIC_UPDATES
@@ -205,14 +206,15 @@ static inline unsigned long pte_update(struct mm_struct *mm,
 	andi.	%1,%0,%6\n\
 	bne-	1b \n\
 	andc	%1,%0,%4 \n\
+	or	%1,%1,%7\n\
 	stdcx.	%1,0,%3 \n\
 	bne-	1b"
 	: "=&r" (old), "=&r" (tmp), "=m" (*ptep)
-	: "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY)
+	: "r" (ptep), "r" (clr), "m" (*ptep), "i" (_PAGE_BUSY), "r" (set)
 	: "cc" );
 #else
 	unsigned long old = pte_val(*ptep);
-	*ptep = __pte(old & ~clr);
+	*ptep = __pte((old & ~clr) | set);
 #endif
 	/* huge pages use the old page table lock */
 	if (!huge)
@@ -233,7 +235,7 @@ static inline int __ptep_test_and_clear_young(struct mm_struct *mm,
 
 	if ((pte_val(*ptep) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
 		return 0;
-	old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0);
+	old = pte_update(mm, addr, ptep, _PAGE_ACCESSED, 0, 0);
 	return (old & _PAGE_ACCESSED) != 0;
 }
 #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
@@ -252,7 +254,7 @@ static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr,
 	if ((pte_val(*ptep) & _PAGE_RW) == 0)
 		return;
 
-	pte_update(mm, addr, ptep, _PAGE_RW, 0);
+	pte_update(mm, addr, ptep, _PAGE_RW, 0, 0);
 }
 
 static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
@@ -261,7 +263,7 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
 	if ((pte_val(*ptep) & _PAGE_RW) == 0)
 		return;
 
-	pte_update(mm, addr, ptep, _PAGE_RW, 1);
+	pte_update(mm, addr, ptep, _PAGE_RW, 0, 1);
 }
 
 /*
@@ -284,14 +286,14 @@ static inline void huge_ptep_set_wrprotect(struct mm_struct *mm,
 static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
 				       unsigned long addr, pte_t *ptep)
 {
-	unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0);
+	unsigned long old = pte_update(mm, addr, ptep, ~0UL, 0, 0);
 	return __pte(old);
 }
 
 static inline void pte_clear(struct mm_struct *mm, unsigned long addr,
 			     pte_t * ptep)
 {
-	pte_update(mm, addr, ptep, ~0UL, 0);
+	pte_update(mm, addr, ptep, ~0UL, 0, 0);
 }
 
 
@@ -506,7 +508,9 @@ extern int pmdp_set_access_flags(struct vm_area_struct *vma,
 
 extern unsigned long pmd_hugepage_update(struct mm_struct *mm,
 					 unsigned long addr,
-					 pmd_t *pmdp, unsigned long clr);
+					 pmd_t *pmdp,
+					 unsigned long clr,
+					 unsigned long set);
 
 static inline int __pmdp_test_and_clear_young(struct mm_struct *mm,
 					      unsigned long addr, pmd_t *pmdp)
@@ -515,7 +519,7 @@ static inline int __pmdp_test_and_clear_young(struct mm_struct *mm,
 
 	if ((pmd_val(*pmdp) & (_PAGE_ACCESSED | _PAGE_HASHPTE)) == 0)
 		return 0;
-	old = pmd_hugepage_update(mm, addr, pmdp, _PAGE_ACCESSED);
+	old = pmd_hugepage_update(mm, addr, pmdp, _PAGE_ACCESSED, 0);
 	return ((old & _PAGE_ACCESSED) != 0);
 }
 
@@ -542,7 +546,7 @@ static inline void pmdp_set_wrprotect(struct mm_struct *mm, unsigned long addr,
 	if ((pmd_val(*pmdp) & _PAGE_RW) == 0)
 		return;
 
-	pmd_hugepage_update(mm, addr, pmdp, _PAGE_RW);
+	pmd_hugepage_update(mm, addr, pmdp, _PAGE_RW, 0);
 }
 
 #define __HAVE_ARCH_PMDP_SPLITTING_FLUSH

arch/powerpc/include/asm/pgtable.h

@@ -75,12 +75,34 @@ static inline pte_t pte_mknuma(pte_t pte)
 	return pte;
 }
 
+#define ptep_set_numa ptep_set_numa
+static inline void ptep_set_numa(struct mm_struct *mm, unsigned long addr,
+				 pte_t *ptep)
+{
+	if ((pte_val(*ptep) & _PAGE_PRESENT) == 0)
+		VM_BUG_ON(1);
+
+	pte_update(mm, addr, ptep, _PAGE_PRESENT, _PAGE_NUMA, 0);
+	return;
+}
+
 #define pmd_numa pmd_numa
 static inline int pmd_numa(pmd_t pmd)
 {
 	return pte_numa(pmd_pte(pmd));
 }
 
+#define pmdp_set_numa pmdp_set_numa
+static inline void pmdp_set_numa(struct mm_struct *mm, unsigned long addr,
+				 pmd_t *pmdp)
+{
+	if ((pmd_val(*pmdp) & _PAGE_PRESENT) == 0)
+		VM_BUG_ON(1);
+
+	pmd_hugepage_update(mm, addr, pmdp, _PAGE_PRESENT, _PAGE_NUMA);
+	return;
+}
+
 #define pmd_mknonnuma pmd_mknonnuma
 static inline pmd_t pmd_mknonnuma(pmd_t pmd)
 {

arch/powerpc/include/asm/vdso.h

@@ -4,11 +4,11 @@
 #ifdef __KERNEL__
 
 /* Default link addresses for the vDSOs */
-#define VDSO32_LBASE	0x100000
+#define VDSO32_LBASE	0x0
-#define VDSO64_LBASE	0x100000
+#define VDSO64_LBASE	0x0
 
 /* Default map addresses for 32bit vDSO */
-#define VDSO32_MBASE	VDSO32_LBASE
+#define VDSO32_MBASE	0x100000
 
 #define VDSO_VERSION_STRING	LINUX_2.6.15
 

arch/powerpc/kernel/eeh.c

@@ -28,6 +28,7 @@
 #include <linux/pci.h>
 #include <linux/proc_fs.h>
 #include <linux/rbtree.h>
+#include <linux/reboot.h>
 #include <linux/seq_file.h>
 #include <linux/spinlock.h>
 #include <linux/export.h>
@@ -89,7 +90,7 @@
 /* Platform dependent EEH operations */
 struct eeh_ops *eeh_ops = NULL;
 
-int eeh_subsystem_enabled;
+bool eeh_subsystem_enabled = false;
 EXPORT_SYMBOL(eeh_subsystem_enabled);
 
 /*
@@ -364,7 +365,7 @@ int eeh_dev_check_failure(struct eeh_dev *edev)
 
 	eeh_stats.total_mmio_ffs++;
 
-	if (!eeh_subsystem_enabled)
+	if (!eeh_enabled())
 		return 0;
 
 	if (!edev) {
@@ -747,6 +748,17 @@ int __exit eeh_ops_unregister(const char *name)
 	return -EEXIST;
 }
 
+static int eeh_reboot_notifier(struct notifier_block *nb,
+			       unsigned long action, void *unused)
+{
+	eeh_set_enable(false);
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block eeh_reboot_nb = {
+	.notifier_call = eeh_reboot_notifier,
+};
+
 /**
  * eeh_init - EEH initialization
  *
@@ -778,6 +790,14 @@ int eeh_init(void)
 	if (machine_is(powernv) && cnt++ <= 0)
 		return ret;
 
+	/* Register reboot notifier */
+	ret = register_reboot_notifier(&eeh_reboot_nb);
+	if (ret) {
+		pr_warn("%s: Failed to register notifier (%d)\n",
+			__func__, ret);
+		return ret;
+	}
+
 	/* call platform initialization function */
 	if (!eeh_ops) {
 		pr_warning("%s: Platform EEH operation not found\n",
@@ -822,7 +842,7 @@ int eeh_init(void)
 			return ret;
 	}
 
-	if (eeh_subsystem_enabled)
+	if (eeh_enabled())
 		pr_info("EEH: PCI Enhanced I/O Error Handling Enabled\n");
 	else
 		pr_warning("EEH: No capable adapters found\n");
@@ -897,7 +917,7 @@ void eeh_add_device_late(struct pci_dev *dev)
 	struct device_node *dn;
 	struct eeh_dev *edev;
 
-	if (!dev || !eeh_subsystem_enabled)
+	if (!dev || !eeh_enabled())
 		return;
 
 	pr_debug("EEH: Adding device %s\n", pci_name(dev));
@@ -1005,7 +1025,7 @@ void eeh_remove_device(struct pci_dev *dev)
 {
 	struct eeh_dev *edev;
 
-	if (!dev || !eeh_subsystem_enabled)
+	if (!dev || !eeh_enabled())
 		return;
 	edev = pci_dev_to_eeh_dev(dev);
 
@@ -1045,7 +1065,7 @@ void eeh_remove_device(struct pci_dev *dev)
 
 static int proc_eeh_show(struct seq_file *m, void *v)
 {
-	if (0 == eeh_subsystem_enabled) {
+	if (!eeh_enabled()) {
 		seq_printf(m, "EEH Subsystem is globally disabled\n");
 		seq_printf(m, "eeh_total_mmio_ffs=%llu\n", eeh_stats.total_mmio_ffs);
 	} else {

arch/powerpc/kernel/misc_32.S

@@ -57,11 +57,14 @@ _GLOBAL(call_do_softirq)
 	mtlr	r0
 	blr
 
+/*
+ * void call_do_irq(struct pt_regs *regs, struct thread_info *irqtp);
+ */
 _GLOBAL(call_do_irq)
 	mflr	r0
 	stw	r0,4(r1)
 	lwz	r10,THREAD+KSP_LIMIT(r2)
-	addi	r11,r3,THREAD_INFO_GAP
+	addi	r11,r4,THREAD_INFO_GAP
 	stwu	r1,THREAD_SIZE-STACK_FRAME_OVERHEAD(r4)
 	mr	r1,r4
 	stw	r10,8(r1)

arch/powerpc/kernel/vdso32/vdso32_wrapper.S

@@ -6,7 +6,7 @@
 	.globl vdso32_start, vdso32_end
 	.balign PAGE_SIZE
 vdso32_start:
-	.incbin "arch/powerpc/kernel/vdso32/vdso32.so"
+	.incbin "arch/powerpc/kernel/vdso32/vdso32.so.dbg"
 	.balign PAGE_SIZE
 vdso32_end:
 

arch/powerpc/kernel/vdso64/vdso64_wrapper.S

@@ -6,7 +6,7 @@
 	.globl vdso64_start, vdso64_end
 	.balign PAGE_SIZE
 vdso64_start:
-	.incbin "arch/powerpc/kernel/vdso64/vdso64.so"
+	.incbin "arch/powerpc/kernel/vdso64/vdso64.so.dbg"
 	.balign PAGE_SIZE
 vdso64_end:
 

arch/powerpc/mm/pgtable_64.c

@@ -510,7 +510,8 @@ int pmdp_set_access_flags(struct vm_area_struct *vma, unsigned long address,
 }
 
 unsigned long pmd_hugepage_update(struct mm_struct *mm, unsigned long addr,
-				  pmd_t *pmdp, unsigned long clr)
+				  pmd_t *pmdp, unsigned long clr,
+				  unsigned long set)
 {
 
 	unsigned long old, tmp;
@@ -526,14 +527,15 @@ unsigned long pmd_hugepage_update(struct mm_struct *mm, unsigned long addr,
 		andi.	%1,%0,%6\n\
 		bne-	1b \n\
 		andc	%1,%0,%4 \n\
+		or	%1,%1,%7\n\
 		stdcx.	%1,0,%3 \n\
 		bne-	1b"
 	: "=&r" (old), "=&r" (tmp), "=m" (*pmdp)
-	: "r" (pmdp), "r" (clr), "m" (*pmdp), "i" (_PAGE_BUSY)
+	: "r" (pmdp), "r" (clr), "m" (*pmdp), "i" (_PAGE_BUSY), "r" (set)
 	: "cc" );
 #else
 	old = pmd_val(*pmdp);
-	*pmdp = __pmd(old & ~clr);
+	*pmdp = __pmd((old & ~clr) | set);
 #endif
 	if (old & _PAGE_HASHPTE)
 		hpte_do_hugepage_flush(mm, addr, pmdp);
@@ -708,7 +710,7 @@ void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 void pmdp_invalidate(struct vm_area_struct *vma, unsigned long address,
 		     pmd_t *pmdp)
 {
-	pmd_hugepage_update(vma->vm_mm, address, pmdp, _PAGE_PRESENT);
+	pmd_hugepage_update(vma->vm_mm, address, pmdp, _PAGE_PRESENT, 0);
 }
 
 /*
@@ -835,7 +837,7 @@ pmd_t pmdp_get_and_clear(struct mm_struct *mm,
 	unsigned long old;
 	pgtable_t *pgtable_slot;
 
-	old = pmd_hugepage_update(mm, addr, pmdp, ~0UL);
+	old = pmd_hugepage_update(mm, addr, pmdp, ~0UL, 0);
 	old_pmd = __pmd(old);
 	/*
 	 * We have pmd == none and we are holding page_table_lock.

arch/powerpc/mm/subpage-prot.c

@@ -78,7 +78,7 @@ static void hpte_flush_range(struct mm_struct *mm, unsigned long addr,
 	pte = pte_offset_map_lock(mm, pmd, addr, &ptl);
 	arch_enter_lazy_mmu_mode();
 	for (; npages > 0; --npages) {
-		pte_update(mm, addr, pte, 0, 0);
+		pte_update(mm, addr, pte, 0, 0, 0);
 		addr += PAGE_SIZE;
 		++pte;
 	}

arch/powerpc/platforms/powernv/eeh-ioda.c

@@ -44,7 +44,8 @@ static int ioda_eeh_event(struct notifier_block *nb,
 
 	/* We simply send special EEH event */
 	if ((changed_evts & OPAL_EVENT_PCI_ERROR) &&
-	    (events & OPAL_EVENT_PCI_ERROR))
+	    (events & OPAL_EVENT_PCI_ERROR) &&
+	    eeh_enabled())
 		eeh_send_failure_event(NULL);
 
 	return 0;
@@ -489,8 +490,7 @@ static int ioda_eeh_bridge_reset(struct pci_controller *hose,
 static int ioda_eeh_reset(struct eeh_pe *pe, int option)
 {
 	struct pci_controller *hose = pe->phb;
-	struct eeh_dev *edev;
+	struct pci_bus *bus;
-	struct pci_dev *dev;
 	int ret;
 
 	/*
@@ -519,31 +519,11 @@ static int ioda_eeh_reset(struct eeh_pe *pe, int option)
 	if (pe->type & EEH_PE_PHB) {
 		ret = ioda_eeh_phb_reset(hose, option);
 	} else {
-		if (pe->type & EEH_PE_DEVICE) {
+		bus = eeh_pe_bus_get(pe);
-			/*
+		if (pci_is_root_bus(bus))
-			 * If it's device PE, we didn't refer to the parent
-			 * PCI bus yet. So we have to figure it out indirectly.
-			 */
-			edev = list_first_entry(&pe->edevs,
-					struct eeh_dev, list);
-			dev = eeh_dev_to_pci_dev(edev);
-			dev = dev->bus->self;
-		} else {
-			/*
-			 * If it's bus PE, the parent PCI bus is already there
-			 * and just pick it up.
-			 */
-			dev = pe->bus->self;
-		}
-
-		/*
-		 * Do reset based on the fact that the direct upstream bridge
-		 * is root bridge (port) or not.
-		 */
-		if (dev->bus->number == 0)
 			ret = ioda_eeh_root_reset(hose, option);
 		else
-			ret = ioda_eeh_bridge_reset(hose, dev, option);
+			ret = ioda_eeh_bridge_reset(hose, bus->self, option);
 	}
 
 	return ret;

arch/powerpc/platforms/powernv/eeh-powernv.c

@@ -145,7 +145,7 @@ static int powernv_eeh_dev_probe(struct pci_dev *dev, void *flag)
 	 * Enable EEH explicitly so that we will do EEH check
 	 * while accessing I/O stuff
 	 */
-	eeh_subsystem_enabled = 1;
+	eeh_set_enable(true);
 
 	/* Save memory bars */
 	eeh_save_bars(edev);

arch/powerpc/platforms/pseries/eeh_pseries.c

@@ -265,7 +265,7 @@ static void *pseries_eeh_of_probe(struct device_node *dn, void *flag)
 			enable = 1;
 
 		if (enable) {
-			eeh_subsystem_enabled = 1;
+			eeh_set_enable(true);
 			eeh_add_to_parent_pe(edev);
 
 			pr_debug("%s: EEH enabled on %s PHB#%d-PE#%x, config addr#%x\n",

arch/powerpc/platforms/pseries/pci.c

@@ -113,7 +113,8 @@ int pseries_root_bridge_prepare(struct pci_host_bridge *bridge)
 {
 	struct device_node *dn, *pdn;
 	struct pci_bus *bus;
-	const __be32 *pcie_link_speed_stats;
+	u32 pcie_link_speed_stats[2];
+	int rc;
 
 	bus = bridge->bus;
 
@@ -122,38 +123,45 @@ int pseries_root_bridge_prepare(struct pci_host_bridge *bridge)
 		return 0;
 
 	for (pdn = dn; pdn != NULL; pdn = of_get_next_parent(pdn)) {
-		pcie_link_speed_stats = of_get_property(pdn,
+		rc = of_property_read_u32_array(pdn,
-			"ibm,pcie-link-speed-stats", NULL);
+				"ibm,pcie-link-speed-stats",
-		if (pcie_link_speed_stats)
+				&pcie_link_speed_stats[0], 2);
+		if (!rc)
 			break;
 	}
 
 	of_node_put(pdn);
 
-	if (!pcie_link_speed_stats) {
+	if (rc) {
 		pr_err("no ibm,pcie-link-speed-stats property\n");
 		return 0;
 	}
 
-	switch (be32_to_cpup(pcie_link_speed_stats)) {
+	switch (pcie_link_speed_stats[0]) {
 	case 0x01:
 		bus->max_bus_speed = PCIE_SPEED_2_5GT;
 		break;
 	case 0x02:
 		bus->max_bus_speed = PCIE_SPEED_5_0GT;
 		break;
+	case 0x04:
+		bus->max_bus_speed = PCIE_SPEED_8_0GT;
+		break;
 	default:
 		bus->max_bus_speed = PCI_SPEED_UNKNOWN;
 		break;
 	}
 
-	switch (be32_to_cpup(pcie_link_speed_stats)) {
+	switch (pcie_link_speed_stats[1]) {
 	case 0x01:
 		bus->cur_bus_speed = PCIE_SPEED_2_5GT;
 		break;
 	case 0x02:
 		bus->cur_bus_speed = PCIE_SPEED_5_0GT;
 		break;
+	case 0x04:
+		bus->cur_bus_speed = PCIE_SPEED_8_0GT;
+		break;
 	default:
 		bus->cur_bus_speed = PCI_SPEED_UNKNOWN;
 		break;

arch/sparc/Kconfig

@@ -27,7 +27,7 @@ config SPARC
 	select RTC_DRV_M48T59
 	select HAVE_DMA_ATTRS
 	select HAVE_DMA_API_DEBUG
-	select HAVE_ARCH_JUMP_LABEL
+	select HAVE_ARCH_JUMP_LABEL if SPARC64
 	select GENERIC_IRQ_SHOW
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select GENERIC_PCI_IOMAP

arch/sparc/mm/srmmu.c

@@ -14,6 +14,7 @@
 #include <linux/pagemap.h>
 #include <linux/vmalloc.h>
 #include <linux/kdebug.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/log2.h>
@@ -62,6 +63,7 @@ extern unsigned long last_valid_pfn;
 static pgd_t *srmmu_swapper_pg_dir;
 
 const struct sparc32_cachetlb_ops *sparc32_cachetlb_ops;
+EXPORT_SYMBOL(sparc32_cachetlb_ops);
 
 #ifdef CONFIG_SMP
 const struct sparc32_cachetlb_ops *local_ops;

arch/x86/include/asm/tsc.h

@@ -66,6 +66,6 @@ extern void tsc_save_sched_clock_state(void);
 extern void tsc_restore_sched_clock_state(void);
 
 /* MSR based TSC calibration for Intel Atom SoC platforms */
-int try_msr_calibrate_tsc(unsigned long *fast_calibrate);
+unsigned long try_msr_calibrate_tsc(void);
 
 #endif /* _ASM_X86_TSC_H */

arch/x86/kernel/cpu/perf_event.c

@@ -1521,6 +1521,8 @@ static int __init init_hw_perf_events(void)
 
 	pr_cont("%s PMU driver.\n", x86_pmu.name);
 
+	x86_pmu.attr_rdpmc = 1; /* enable userspace RDPMC usage by default */
+
 	for (quirk = x86_pmu.quirks; quirk; quirk = quirk->next)
 		quirk->func();
 
@@ -1534,7 +1536,6 @@ static int __init init_hw_perf_events(void)
 		__EVENT_CONSTRAINT(0, (1ULL << x86_pmu.num_counters) - 1,
 				   0, x86_pmu.num_counters, 0, 0);
 
-	x86_pmu.attr_rdpmc = 1; /* enable userspace RDPMC usage by default */
 	x86_pmu_format_group.attrs = x86_pmu.format_attrs;
 
 	if (x86_pmu.event_attrs)
@@ -1820,9 +1821,12 @@ static ssize_t set_attr_rdpmc(struct device *cdev,
 	if (ret)
 		return ret;
 
+	if (x86_pmu.attr_rdpmc_broken)
+		return -ENOTSUPP;
+
 	if (!!val != !!x86_pmu.attr_rdpmc) {
 		x86_pmu.attr_rdpmc = !!val;
-		smp_call_function(change_rdpmc, (void *)val, 1);
+		on_each_cpu(change_rdpmc, (void *)val, 1);
 	}
 
 	return count;

arch/x86/kernel/cpu/perf_event.h

@@ -409,6 +409,7 @@ struct x86_pmu {
 	/*
 	 * sysfs attrs
 	 */
+	int		attr_rdpmc_broken;
 	int		attr_rdpmc;
 	struct attribute **format_attrs;
 	struct attribute **event_attrs;

arch/x86/kernel/cpu/perf_event_intel.c

@@ -1361,10 +1361,8 @@ static int intel_pmu_handle_irq(struct pt_regs *regs)
 	intel_pmu_disable_all();
 	handled = intel_pmu_drain_bts_buffer();
 	status = intel_pmu_get_status();
-	if (!status) {
+	if (!status)
-		intel_pmu_enable_all(0);
+		goto done;
-		return handled;
-	}
 
 	loops = 0;
 again:
@@ -2310,10 +2308,7 @@ __init int intel_pmu_init(void)
 	if (version > 1)
 		x86_pmu.num_counters_fixed = max((int)edx.split.num_counters_fixed, 3);
 
-	/*
+	if (boot_cpu_has(X86_FEATURE_PDCM)) {
-	 * v2 and above have a perf capabilities MSR
-	 */
-	if (version > 1) {
 		u64 capabilities;
 
 		rdmsrl(MSR_IA32_PERF_CAPABILITIES, capabilities);

arch/x86/kernel/cpu/perf_event_intel_uncore.c

@@ -501,8 +501,11 @@ static struct extra_reg snbep_uncore_cbox_extra_regs[] = {
 	SNBEP_CBO_EVENT_EXTRA_REG(SNBEP_CBO_PMON_CTL_TID_EN,
 				  SNBEP_CBO_PMON_CTL_TID_EN, 0x1),
 	SNBEP_CBO_EVENT_EXTRA_REG(0x0334, 0xffff, 0x4),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x4334, 0xffff, 0x6),
 	SNBEP_CBO_EVENT_EXTRA_REG(0x0534, 0xffff, 0x4),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x4534, 0xffff, 0x6),
 	SNBEP_CBO_EVENT_EXTRA_REG(0x0934, 0xffff, 0x4),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x4934, 0xffff, 0x6),
 	SNBEP_CBO_EVENT_EXTRA_REG(0x4134, 0xffff, 0x6),
 	SNBEP_CBO_EVENT_EXTRA_REG(0x0135, 0xffff, 0x8),
 	SNBEP_CBO_EVENT_EXTRA_REG(0x0335, 0xffff, 0x8),
@@ -1178,10 +1181,15 @@ static struct extra_reg ivt_uncore_cbox_extra_regs[] = {
 	SNBEP_CBO_EVENT_EXTRA_REG(SNBEP_CBO_PMON_CTL_TID_EN,
 				  SNBEP_CBO_PMON_CTL_TID_EN, 0x1),
 	SNBEP_CBO_EVENT_EXTRA_REG(0x1031, 0x10ff, 0x2),
-	SNBEP_CBO_EVENT_EXTRA_REG(0x0334, 0xffff, 0x4),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x1134, 0xffff, 0x4),
-	SNBEP_CBO_EVENT_EXTRA_REG(0x0534, 0xffff, 0x4),
-	SNBEP_CBO_EVENT_EXTRA_REG(0x0934, 0xffff, 0x4),
 	SNBEP_CBO_EVENT_EXTRA_REG(0x4134, 0xffff, 0xc),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x5134, 0xffff, 0xc),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x0334, 0xffff, 0x4),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x4334, 0xffff, 0xc),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x0534, 0xffff, 0x4),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x4534, 0xffff, 0xc),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x0934, 0xffff, 0x4),
+	SNBEP_CBO_EVENT_EXTRA_REG(0x4934, 0xffff, 0xc),
 	SNBEP_CBO_EVENT_EXTRA_REG(0x0135, 0xffff, 0x10),
 	SNBEP_CBO_EVENT_EXTRA_REG(0x0335, 0xffff, 0x10),
 	SNBEP_CBO_EVENT_EXTRA_REG(0x2135, 0xffff, 0x10),

arch/x86/kernel/cpu/perf_event_p6.c

@@ -231,31 +231,49 @@ static __initconst const struct x86_pmu p6_pmu = {
 
 };
 
-__init int p6_pmu_init(void)
+static __init void p6_pmu_rdpmc_quirk(void)
 {
-	switch (boot_cpu_data.x86_model) {
+	if (boot_cpu_data.x86_mask < 9) {
-	case 1:
+		/*
-	case 3:  /* Pentium Pro */
+		 * PPro erratum 26; fixed in stepping 9 and above.
-	case 5:
+		 */
-	case 6:  /* Pentium II */
+		pr_warn("Userspace RDPMC support disabled due to a CPU erratum\n");
-	case 7:
+		x86_pmu.attr_rdpmc_broken = 1;
-	case 8:
+		x86_pmu.attr_rdpmc = 0;
-	case 11: /* Pentium III */
+	}
-	case 9:
-	case 13:
-		/* Pentium M */
-		break;
-	default:
-		pr_cont("unsupported p6 CPU model %d ",
-			boot_cpu_data.x86_model);
-		return -ENODEV;
 }
 
+__init int p6_pmu_init(void)
+{
 	x86_pmu = p6_pmu;
 
+	switch (boot_cpu_data.x86_model) {
+	case  1: /* Pentium Pro */
+		x86_add_quirk(p6_pmu_rdpmc_quirk);
+		break;
+
+	case  3: /* Pentium II - Klamath */
+	case  5: /* Pentium II - Deschutes */
+	case  6: /* Pentium II - Mendocino */
+		break;
+
+	case  7: /* Pentium III - Katmai */
+	case  8: /* Pentium III - Coppermine */
+	case 10: /* Pentium III Xeon */
+	case 11: /* Pentium III - Tualatin */
+		break;
+
+	case  9: /* Pentium M - Banias */
+	case 13: /* Pentium M - Dothan */
+		break;
+
+	default:
+		pr_cont("unsupported p6 CPU model %d ", boot_cpu_data.x86_model);
+		return -ENODEV;
+	}
+
 	memcpy(hw_cache_event_ids, p6_hw_cache_event_ids,
 		sizeof(hw_cache_event_ids));
 
-
 	return 0;
 }

arch/x86/kernel/pci-dma.c

@@ -100,8 +100,10 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size,
 	flag |= __GFP_ZERO;
 again:
 	page = NULL;
-	if (!(flag & GFP_ATOMIC))
+	/* CMA can be used only in the context which permits sleeping */
+	if (flag & __GFP_WAIT)
 		page = dma_alloc_from_contiguous(dev, count, get_order(size));
+	/* fallback */
 	if (!page)
 		page = alloc_pages_node(dev_to_node(dev), flag, get_order(size));
 	if (!page)

arch/x86/kernel/tsc.c

@@ -653,13 +653,10 @@ unsigned long native_calibrate_tsc(void)
 
 	/* Calibrate TSC using MSR for Intel Atom SoCs */
 	local_irq_save(flags);
-	i = try_msr_calibrate_tsc(&fast_calibrate);
+	fast_calibrate = try_msr_calibrate_tsc();
 	local_irq_restore(flags);
-	if (i >= 0) {
+	if (fast_calibrate)
-		if (i == 0)
-			pr_warn("Fast TSC calibration using MSR failed\n");
 		return fast_calibrate;
-	}
 
 	local_irq_save(flags);
 	fast_calibrate = quick_pit_calibrate();

arch/x86/kernel/tsc_msr.c

@@ -53,7 +53,7 @@ static struct freq_desc freq_desc_tables[] = {
 	/* TNG */
 	{ 6, 0x4a, 1, { 0, FREQ_100, FREQ_133, 0, 0, 0, 0, 0 } },
 	/* VLV2 */
-	{ 6, 0x37, 1, { 0, FREQ_100, FREQ_133, FREQ_166, 0, 0, 0, 0 } },
+	{ 6, 0x37, 1, { FREQ_83, FREQ_100, FREQ_133, FREQ_166, 0, 0, 0, 0 } },
 	/* ANN */
 	{ 6, 0x5a, 1, { FREQ_83, FREQ_100, FREQ_133, FREQ_100, 0, 0, 0, 0 } },
 };
@@ -77,21 +77,18 @@ static int match_cpu(u8 family, u8 model)
 
 /*
  * Do MSR calibration only for known/supported CPUs.
- * Return values:
+ *
- * -1: CPU is unknown/unsupported for MSR based calibration
+ * Returns the calibration value or 0 if MSR calibration failed.
- *  0: CPU is known/supported, but calibration failed
- *  1: CPU is known/supported, and calibration succeeded
  */
-int try_msr_calibrate_tsc(unsigned long *fast_calibrate)
+unsigned long try_msr_calibrate_tsc(void)
 {
-	int cpu_index;
 	u32 lo, hi, ratio, freq_id, freq;
+	unsigned long res;
+	int cpu_index;
 
 	cpu_index = match_cpu(boot_cpu_data.x86, boot_cpu_data.x86_model);
 	if (cpu_index < 0)
-		return -1;
+		return 0;
-
-	*fast_calibrate = 0;
 
 	if (freq_desc_tables[cpu_index].msr_plat) {
 		rdmsr(MSR_PLATFORM_INFO, lo, hi);
@@ -103,7 +100,7 @@ int try_msr_calibrate_tsc(unsigned long *fast_calibrate)
 	pr_info("Maximum core-clock to bus-clock ratio: 0x%x\n", ratio);
 
 	if (!ratio)
-		return 0;
+		goto fail;
 
 	/* Get FSB FREQ ID */
 	rdmsr(MSR_FSB_FREQ, lo, hi);
@@ -112,16 +109,19 @@ int try_msr_calibrate_tsc(unsigned long *fast_calibrate)
 	pr_info("Resolved frequency ID: %u, frequency: %u KHz\n",
 				freq_id, freq);
 	if (!freq)
-		return 0;
+		goto fail;
 
 	/* TSC frequency = maximum resolved freq * maximum resolved bus ratio */
-	*fast_calibrate = freq * ratio;
+	res = freq * ratio;
-	pr_info("TSC runs at %lu KHz\n", *fast_calibrate);
+	pr_info("TSC runs at %lu KHz\n", res);
 
 #ifdef CONFIG_X86_LOCAL_APIC
 	lapic_timer_frequency = (freq * 1000) / HZ;
 	pr_info("lapic_timer_frequency = %d\n", lapic_timer_frequency);
 #endif
+	return res;
 
-	return 1;
+fail:
+	pr_warn("Fast TSC calibration using MSR failed\n");
+	return 0;
 }

drivers/acpi/ac.c

@@ -243,6 +243,8 @@ static int acpi_ac_resume(struct device *dev)
 		kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE);
 	return 0;
 }
+#else
+#define acpi_ac_resume NULL
 #endif
 static SIMPLE_DEV_PM_OPS(acpi_ac_pm_ops, NULL, acpi_ac_resume);
 

drivers/acpi/battery.c

@@ -841,6 +841,8 @@ static int acpi_battery_resume(struct device *dev)
 	acpi_battery_update(battery);
 	return 0;
 }
+#else
+#define acpi_battery_resume NULL
 #endif
 
 static SIMPLE_DEV_PM_OPS(acpi_battery_pm, NULL, acpi_battery_resume);

drivers/acpi/blacklist.c

@@ -260,14 +260,6 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
 	},
 	{
 	.callback = dmi_disable_osi_win8,
-	.ident = "Dell Inspiron 15R SE",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "Inspiron 7520"),
-		},
-	},
-	{
-	.callback = dmi_disable_osi_win8,
 	.ident = "ThinkPad Edge E530",
 	.matches = {
 		     DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
@@ -322,56 +314,6 @@ static struct dmi_system_id acpi_osi_dmi_table[] __initdata = {
 		     DMI_MATCH(DMI_PRODUCT_VERSION, "2349D15"),
 		},
 	},
-	{
-	.callback = dmi_disable_osi_win8,
-	.ident = "HP ProBook 2013 models",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "HP ProBook "),
-		     DMI_MATCH(DMI_PRODUCT_NAME, " G1"),
-		},
-	},
-	{
-	.callback = dmi_disable_osi_win8,
-	.ident = "HP EliteBook 2013 models",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook "),
-		     DMI_MATCH(DMI_PRODUCT_NAME, " G1"),
-		},
-	},
-	{
-	.callback = dmi_disable_osi_win8,
-	.ident = "HP ZBook 14",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "HP ZBook 14"),
-		},
-	},
-	{
-	.callback = dmi_disable_osi_win8,
-	.ident = "HP ZBook 15",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "HP ZBook 15"),
-		},
-	},
-	{
-	.callback = dmi_disable_osi_win8,
-	.ident = "HP ZBook 17",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "HP ZBook 17"),
-		},
-	},
-	{
-	.callback = dmi_disable_osi_win8,
-	.ident = "HP EliteBook 8780w",
-	.matches = {
-		     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-		     DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook 8780w"),
-		},
-	},
 
 	/*
 	 * BIOS invocation of _OSI(Linux) is almost always a BIOS bug.

drivers/acpi/button.c

@@ -80,6 +80,8 @@ static void acpi_button_notify(struct acpi_device *device, u32 event);
 
 #ifdef CONFIG_PM_SLEEP
 static int acpi_button_resume(struct device *dev);
+#else
+#define acpi_button_resume NULL
 #endif
 static SIMPLE_DEV_PM_OPS(acpi_button_pm, NULL, acpi_button_resume);
 

drivers/acpi/dock.c

@@ -713,13 +713,11 @@ static acpi_status __init find_dock_devices(acpi_handle handle, u32 lvl,
 static ssize_t show_docked(struct device *dev,
 			   struct device_attribute *attr, char *buf)
 {
-	struct acpi_device *tmp;
-
 	struct dock_station *dock_station = dev->platform_data;
+	struct acpi_device *adev = NULL;
 
-	if (!acpi_bus_get_device(dock_station->handle, &tmp))
+	acpi_bus_get_device(dock_station->handle, &adev);
-		return snprintf(buf, PAGE_SIZE, "1\n");
+	return snprintf(buf, PAGE_SIZE, "%u\n", acpi_device_enumerated(adev));
-	return snprintf(buf, PAGE_SIZE, "0\n");
 }
 static DEVICE_ATTR(docked, S_IRUGO, show_docked, NULL);
 

drivers/acpi/fan.c

@@ -55,6 +55,9 @@ MODULE_DEVICE_TABLE(acpi, fan_device_ids);
 #ifdef CONFIG_PM_SLEEP
 static int acpi_fan_suspend(struct device *dev);
 static int acpi_fan_resume(struct device *dev);
+#else
+#define acpi_fan_suspend NULL
+#define acpi_fan_resume NULL
 #endif
 static SIMPLE_DEV_PM_OPS(acpi_fan_pm, acpi_fan_suspend, acpi_fan_resume);
 

drivers/acpi/pci_irq.c

@@ -430,6 +430,7 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
 				 pin_name(pin));
 		}
 
+		kfree(entry);
 		return 0;
 	}
 

drivers/acpi/sbs.c

@@ -450,7 +450,7 @@ static ssize_t acpi_battery_alarm_store(struct device *dev,
 {
 	unsigned long x;
 	struct acpi_battery *battery = to_acpi_battery(dev_get_drvdata(dev));
-	if (sscanf(buf, "%ld\n", &x) == 1)
+	if (sscanf(buf, "%lu\n", &x) == 1)
 		battery->alarm_capacity = x /
 			(1000 * acpi_battery_scale(battery));
 	if (battery->present)
@@ -668,6 +668,8 @@ static int acpi_sbs_resume(struct device *dev)
 	acpi_sbs_callback(sbs);
 	return 0;
 }
+#else
+#define acpi_sbs_resume NULL
 #endif
 
 static SIMPLE_DEV_PM_OPS(acpi_sbs_pm, NULL, acpi_sbs_resume);

drivers/acpi/thermal.c

@@ -102,6 +102,8 @@ MODULE_DEVICE_TABLE(acpi, thermal_device_ids);
 
 #ifdef CONFIG_PM_SLEEP
 static int acpi_thermal_resume(struct device *dev);
+#else
+#define acpi_thermal_resume NULL
 #endif
 static SIMPLE_DEV_PM_OPS(acpi_thermal_pm, NULL, acpi_thermal_resume);
 

drivers/acpi/video.c

@@ -81,11 +81,12 @@ static bool allow_duplicates;
 module_param(allow_duplicates, bool, 0644);
 
 /*
- * For Windows 8 systems: if set ture and the GPU driver has
+ * For Windows 8 systems: used to decide if video module
- * registered a backlight interface, skip registering ACPI video's.
+ * should skip registering backlight interface of its own.
  */
-static bool use_native_backlight = false;
+static int use_native_backlight_param = -1;
-module_param(use_native_backlight, bool, 0644);
+module_param_named(use_native_backlight, use_native_backlight_param, int, 0444);
+static bool use_native_backlight_dmi = false;
 
 static int register_count;
 static struct mutex video_list_lock;
@@ -231,9 +232,17 @@ static int acpi_video_get_next_level(struct acpi_video_device *device,
 static int acpi_video_switch_brightness(struct acpi_video_device *device,
 					 int event);
 
+static bool acpi_video_use_native_backlight(void)
+{
+	if (use_native_backlight_param != -1)
+		return use_native_backlight_param;
+	else
+		return use_native_backlight_dmi;
+}
+
 static bool acpi_video_verify_backlight_support(void)
 {
-	if (acpi_osi_is_win8() && use_native_backlight &&
+	if (acpi_osi_is_win8() && acpi_video_use_native_backlight() &&
 	    backlight_device_registered(BACKLIGHT_RAW))
 		return false;
 	return acpi_video_backlight_support();
@@ -398,6 +407,12 @@ static int __init video_set_bqc_offset(const struct dmi_system_id *d)
 	return 0;
 }
 
+static int __init video_set_use_native_backlight(const struct dmi_system_id *d)
+{
+	use_native_backlight_dmi = true;
+	return 0;
+}
+
 static struct dmi_system_id video_dmi_table[] __initdata = {
 	/*
 	 * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
@@ -442,6 +457,120 @@ static struct dmi_system_id video_dmi_table[] __initdata = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 7720"),
 		},
 	},
+	{
+	 .callback = video_set_use_native_backlight,
+	 .ident = "ThinkPad T430s",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+		DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T430s"),
+		},
+	},
+	{
+	 .callback = video_set_use_native_backlight,
+	 .ident = "ThinkPad X230",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+		DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X230"),
+		},
+	},
+	{
+	.callback = video_set_use_native_backlight,
+	.ident = "ThinkPad X1 Carbon",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+		DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad X1 Carbon"),
+		},
+	},
+	{
+	 .callback = video_set_use_native_backlight,
+	 .ident = "Lenovo Yoga 13",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+		DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo IdeaPad Yoga 13"),
+		},
+	},
+	{
+	 .callback = video_set_use_native_backlight,
+	 .ident = "Dell Inspiron 7520",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+		DMI_MATCH(DMI_PRODUCT_VERSION, "Inspiron 7520"),
+		},
+	},
+	{
+	 .callback = video_set_use_native_backlight,
+	 .ident = "Acer Aspire 5733Z",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5733Z"),
+		},
+	},
+	{
+	 .callback = video_set_use_native_backlight,
+	 .ident = "Acer Aspire V5-431",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Aspire V5-431"),
+		},
+	},
+	{
+	.callback = video_set_use_native_backlight,
+	.ident = "HP ProBook 4340s",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_VERSION, "HP ProBook 4340s"),
+		},
+	},
+	{
+	.callback = video_set_use_native_backlight,
+	.ident = "HP ProBook 2013 models",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP ProBook "),
+		DMI_MATCH(DMI_PRODUCT_NAME, " G1"),
+		},
+	},
+	{
+	.callback = video_set_use_native_backlight,
+	.ident = "HP EliteBook 2013 models",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook "),
+		DMI_MATCH(DMI_PRODUCT_NAME, " G1"),
+		},
+	},
+	{
+	.callback = video_set_use_native_backlight,
+	.ident = "HP ZBook 14",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP ZBook 14"),
+		},
+	},
+	{
+	.callback = video_set_use_native_backlight,
+	.ident = "HP ZBook 15",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP ZBook 15"),
+		},
+	},
+	{
+	.callback = video_set_use_native_backlight,
+	.ident = "HP ZBook 17",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP ZBook 17"),
+		},
+	},
+	{
+	.callback = video_set_use_native_backlight,
+	.ident = "HP EliteBook 8780w",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook 8780w"),
+		},
+	},
 	{}
 };
 
@@ -685,6 +814,7 @@ acpi_video_init_brightness(struct acpi_video_device *device)
 	union acpi_object *o;
 	struct acpi_video_device_brightness *br = NULL;
 	int result = -EINVAL;
+	u32 value;
 
 	if (!ACPI_SUCCESS(acpi_video_device_lcd_query_levels(device, &obj))) {
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Could not query available "
@@ -715,7 +845,12 @@ acpi_video_init_brightness(struct acpi_video_device *device)
 			printk(KERN_ERR PREFIX "Invalid data\n");
 			continue;
 		}
-		br->levels[count] = (u32) o->integer.value;
+		value = (u32) o->integer.value;
+		/* Skip duplicate entries */
+		if (count > 2 && br->levels[count - 1] == value)
+			continue;
+
+		br->levels[count] = value;
 
 		if (br->levels[count] > max_level)
 			max_level = br->levels[count];

drivers/acpi/video_detect.c

@@ -168,22 +168,6 @@ static struct dmi_system_id video_detect_dmi_table[] = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "UL30A"),
 		},
 	},
-	{
-	.callback = video_detect_force_vendor,
-	.ident = "HP EliteBook Revolve 810",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-		DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook Revolve 810 G1"),
-		},
-	},
-	{
-	.callback = video_detect_force_vendor,
-	.ident = "Lenovo Yoga 13",
-	.matches = {
-		DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
-		DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo IdeaPad Yoga 13"),
-		},
-	},
 	{ },
 };
 

drivers/ata/Kconfig

@@ -247,6 +247,7 @@ config SATA_HIGHBANK
 
 config SATA_MV
 	tristate "Marvell SATA support"
+	select GENERIC_PHY
 	help
 	  This option enables support for the Marvell Serial ATA family.
 	  Currently supports 88SX[56]0[48][01] PCI(-X) chips,

drivers/ata/ahci.c

@@ -61,6 +61,7 @@ enum board_ids {
 	/* board IDs by feature in alphabetical order */
 	board_ahci,
 	board_ahci_ign_iferr,
+	board_ahci_noncq,
 	board_ahci_nosntf,
 	board_ahci_yes_fbs,
 
@@ -121,6 +122,13 @@ static const struct ata_port_info ahci_port_info[] = {
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
+	[board_ahci_noncq] = {
+		AHCI_HFLAGS	(AHCI_HFLAG_NO_NCQ),
+		.flags		= AHCI_FLAG_COMMON,
+		.pio_mask	= ATA_PIO4,
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &ahci_ops,
+	},
 	[board_ahci_nosntf] = {
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_SNTF),
 		.flags		= AHCI_FLAG_COMMON,
@@ -452,6 +460,12 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci },	/* ASM1061 */
 	{ PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci },	/* ASM1062 */
 
+	/*
+	 * Samsung SSDs found on some macbooks.  NCQ times out.
+	 * https://bugzilla.kernel.org/show_bug.cgi?id=60731
+	 */
+	{ PCI_VDEVICE(SAMSUNG, 0x1600), board_ahci_noncq },
+
 	/* Enmotus */
 	{ PCI_DEVICE(0x1c44, 0x8000), board_ahci },
 
@@ -1170,8 +1184,10 @@ static int ahci_init_interrupts(struct pci_dev *pdev, unsigned int n_ports,
 
 	nvec = rc;
 	rc = pci_enable_msi_block(pdev, nvec);
-	if (rc)
+	if (rc < 0)
 		goto intx;
+	else if (rc > 0)
+		goto single_msi;
 
 	return nvec;
 

drivers/ata/libata-pmp.c

@@ -447,8 +447,11 @@ static void sata_pmp_quirks(struct ata_port *ap)
 		 * otherwise.  Don't try hard to recover it.
 		 */
 		ap->pmp_link[ap->nr_pmp_links - 1].flags |= ATA_LFLAG_NO_RETRY;
-	} else if (vendor == 0x197b && devid == 0x2352) {
+	} else if (vendor == 0x197b && (devid == 0x2352 || devid == 0x0325)) {
-		/* chip found in Thermaltake BlackX Duet, jmicron JMB350? */
+		/*
+		 * 0x2352: found in Thermaltake BlackX Duet, jmicron JMB350?
+		 * 0x0325: jmicron JMB394.
+		 */
 		ata_for_each_link(link, ap, EDGE) {
 			/* SRST breaks detection and disks get misclassified
 			 * LPM disabled to avoid potential problems

drivers/ata/pata_imx.c

@@ -119,7 +119,9 @@ static int pata_imx_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->clk);
 	}
 
-	clk_prepare_enable(priv->clk);
+	ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
 
 	host = ata_host_alloc(&pdev->dev, 1);
 	if (!host) {
@@ -212,7 +214,9 @@ static int pata_imx_resume(struct device *dev)
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct pata_imx_priv *priv = host->private_data;
 
-	clk_prepare_enable(priv->clk);
+	int ret = clk_prepare_enable(priv->clk);
+	if (ret)
+		return ret;
 
 	__raw_writel(priv->ata_ctl, priv->host_regs + PATA_IMX_ATA_CONTROL);
 

drivers/ata/sata_mv.c

@@ -4104,7 +4104,6 @@ static int mv_platform_probe(struct platform_device *pdev)
 	if (!hpriv->port_phys)
 		return -ENOMEM;
 	host->private_data = hpriv;
-	hpriv->n_ports = n_ports;
 	hpriv->board_idx = chip_soc;
 
 	host->iomap = NULL;
@@ -4132,13 +4131,18 @@ static int mv_platform_probe(struct platform_device *pdev)
 			rc = PTR_ERR(hpriv->port_phys[port]);
 			hpriv->port_phys[port] = NULL;
 			if (rc != -EPROBE_DEFER)
-				dev_warn(&pdev->dev, "error getting phy %d",
+				dev_warn(&pdev->dev, "error getting phy %d", rc);
-					rc);
+
+			/* Cleanup only the initialized ports */
+			hpriv->n_ports = port;
 			goto err;
 		} else
 			phy_power_on(hpriv->port_phys[port]);
 	}
 
+	/* All the ports have been initialized */
+	hpriv->n_ports = n_ports;
+
 	/*
 	 * (Re-)program MBUS remapping windows if we are asked to.
 	 */
@@ -4176,7 +4180,7 @@ err:
 		clk_disable_unprepare(hpriv->clk);
 		clk_put(hpriv->clk);
 	}
-	for (port = 0; port < n_ports; port++) {
+	for (port = 0; port < hpriv->n_ports; port++) {
 		if (!IS_ERR(hpriv->port_clks[port])) {
 			clk_disable_unprepare(hpriv->port_clks[port]);
 			clk_put(hpriv->port_clks[port]);

drivers/ata/sata_sil.c

@@ -157,6 +157,7 @@ static const struct sil_drivelist {
 	{ "ST380011ASL",	SIL_QUIRK_MOD15WRITE },
 	{ "ST3120022ASL",	SIL_QUIRK_MOD15WRITE },
 	{ "ST3160021ASL",	SIL_QUIRK_MOD15WRITE },
+	{ "TOSHIBA MK2561GSYN",	SIL_QUIRK_MOD15WRITE },
 	{ "Maxtor 4D060H3",	SIL_QUIRK_UDMA5MAX },
 	{ }
 };

drivers/base/dma-buf.c

@@ -616,36 +616,35 @@ static int dma_buf_describe(struct seq_file *s)
 	if (ret)
 		return ret;
 
-	seq_printf(s, "\nDma-buf Objects:\n");
+	seq_puts(s, "\nDma-buf Objects:\n");
-	seq_printf(s, "\texp_name\tsize\tflags\tmode\tcount\n");
+	seq_puts(s, "size\tflags\tmode\tcount\texp_name\n");
 
 	list_for_each_entry(buf_obj, &db_list.head, list_node) {
 		ret = mutex_lock_interruptible(&buf_obj->lock);
 
 		if (ret) {
-			seq_printf(s,
+			seq_puts(s,
 				 "\tERROR locking buffer object: skipping\n");
 			continue;
 		}
 
-		seq_printf(s, "\t");
+		seq_printf(s, "%08zu\t%08x\t%08x\t%08ld\t%s\n",
-
+				buf_obj->size,
-		seq_printf(s, "\t%s\t%08zu\t%08x\t%08x\t%08ld\n",
-				buf_obj->exp_name, buf_obj->size,
 				buf_obj->file->f_flags, buf_obj->file->f_mode,
-				(long)(buf_obj->file->f_count.counter));
+				(long)(buf_obj->file->f_count.counter),
+				buf_obj->exp_name);
 
-		seq_printf(s, "\t\tAttached Devices:\n");
+		seq_puts(s, "\tAttached Devices:\n");
 		attach_count = 0;
 
 		list_for_each_entry(attach_obj, &buf_obj->attachments, node) {
-			seq_printf(s, "\t\t");
+			seq_puts(s, "\t");
 
-			seq_printf(s, "%s\n", attach_obj->dev->init_name);
+			seq_printf(s, "%s\n", dev_name(attach_obj->dev));
 			attach_count++;
 		}
 
-		seq_printf(s, "\n\t\tTotal %d devices attached\n",
+		seq_printf(s, "Total %d devices attached\n\n",
 				attach_count);
 
 		count++;

drivers/cpufreq/cpufreq.c

@@ -1323,7 +1323,6 @@ static int __cpufreq_remove_dev_prepare(struct device *dev,
 	up_read(&policy->rwsem);
 
 	if (cpu != policy->cpu) {
-		if (!frozen)
 		sysfs_remove_link(&dev->kobj, "cpufreq");
 	} else if (cpus > 1) {
 		new_cpu = cpufreq_nominate_new_policy_cpu(policy, cpu);

drivers/cpufreq/intel_pstate.c

@@ -36,6 +36,8 @@
 
 #define BYT_RATIOS		0x66a
 #define BYT_VIDS		0x66b
+#define BYT_TURBO_RATIOS	0x66c
+
 
 #define FRAC_BITS 8
 #define int_tofp(X) ((int64_t)(X) << FRAC_BITS)
@@ -357,7 +359,7 @@ static int byt_get_min_pstate(void)
 {
 	u64 value;
 	rdmsrl(BYT_RATIOS, value);
-	return value & 0xFF;
+	return (value >> 8) & 0xFF;
 }
 
 static int byt_get_max_pstate(void)
@@ -367,6 +369,13 @@ static int byt_get_max_pstate(void)
 	return (value >> 16) & 0xFF;
 }
 
+static int byt_get_turbo_pstate(void)
+{
+	u64 value;
+	rdmsrl(BYT_TURBO_RATIOS, value);
+	return value & 0x3F;
+}
+
 static void byt_set_pstate(struct cpudata *cpudata, int pstate)
 {
 	u64 val;
@@ -469,7 +478,7 @@ static struct cpu_defaults byt_params = {
 	.funcs = {
 		.get_max = byt_get_max_pstate,
 		.get_min = byt_get_min_pstate,
-		.get_turbo = byt_get_max_pstate,
+		.get_turbo = byt_get_turbo_pstate,
 		.set = byt_set_pstate,
 		.get_vid = byt_get_vid,
 	},

drivers/cpufreq/powernow-k8.c

@@ -1076,7 +1076,7 @@ static int powernowk8_cpu_init(struct cpufreq_policy *pol)
 {
 	struct powernow_k8_data *data;
 	struct init_on_cpu init_on_cpu;
-	int rc;
+	int rc, cpu;
 
 	smp_call_function_single(pol->cpu, check_supported_cpu, &rc, 1);
 	if (rc)
@@ -1140,7 +1140,9 @@ static int powernowk8_cpu_init(struct cpufreq_policy *pol)
 	pr_debug("cpu_init done, current fid 0x%x, vid 0x%x\n",
 		 data->currfid, data->currvid);
 
-	per_cpu(powernow_data, pol->cpu) = data;
+	/* Point all the CPUs in this policy to the same data */
+	for_each_cpu(cpu, pol->cpus)
+		per_cpu(powernow_data, cpu) = data;
 
 	return 0;
 
@@ -1155,6 +1157,7 @@ err_out:
 static int powernowk8_cpu_exit(struct cpufreq_policy *pol)
 {
 	struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu);
+	int cpu;
 
 	if (!data)
 		return -EINVAL;
@@ -1165,7 +1168,8 @@ static int powernowk8_cpu_exit(struct cpufreq_policy *pol)
 
 	kfree(data->powernow_table);
 	kfree(data);
-	per_cpu(powernow_data, pol->cpu) = NULL;
+	for_each_cpu(cpu, pol->cpus)
+		per_cpu(powernow_data, cpu) = NULL;
 
 	return 0;
 }

drivers/gpu/drm/drm_ioctl.c

@@ -296,6 +296,18 @@ int drm_getcap(struct drm_device *dev, void *data, struct drm_file *file_priv)
 	case DRM_CAP_ASYNC_PAGE_FLIP:
 		req->value = dev->mode_config.async_page_flip;
 		break;
+	case DRM_CAP_CURSOR_WIDTH:
+		if (dev->mode_config.cursor_width)
+			req->value = dev->mode_config.cursor_width;
+		else
+			req->value = 64;
+		break;
+	case DRM_CAP_CURSOR_HEIGHT:
+		if (dev->mode_config.cursor_height)
+			req->value = dev->mode_config.cursor_height;
+		else
+			req->value = 64;
+		break;
 	default:
 		return -EINVAL;
 	}

drivers/gpu/drm/i2c/tda998x_drv.c

@@ -1151,8 +1151,10 @@ tda998x_encoder_init(struct i2c_client *client,
 
 	priv->current_page = 0xff;
 	priv->cec = i2c_new_dummy(client->adapter, 0x34);
-	if (!priv->cec)
+	if (!priv->cec) {
+		kfree(priv);
 		return -ENODEV;
+	}
 	priv->dpms = DRM_MODE_DPMS_OFF;
 
 	encoder_slave->slave_priv = priv;

drivers/gpu/drm/i915/intel_display.c

@@ -8586,6 +8586,20 @@ static int intel_gen7_queue_flip(struct drm_device *dev,
 	if (ring->id == RCS)
 		len += 6;
 
+	/*
+	 * BSpec MI_DISPLAY_FLIP for IVB:
+	 * "The full packet must be contained within the same cache line."
+	 *
+	 * Currently the LRI+SRM+MI_DISPLAY_FLIP all fit within the same
+	 * cacheline, if we ever start emitting more commands before
+	 * the MI_DISPLAY_FLIP we may need to first emit everything else,
+	 * then do the cacheline alignment, and finally emit the
+	 * MI_DISPLAY_FLIP.
+	 */
+	ret = intel_ring_cacheline_align(ring);
+	if (ret)
+		goto err_unpin;
+
 	ret = intel_ring_begin(ring, len);
 	if (ret)
 		goto err_unpin;

drivers/gpu/drm/i915/intel_dp.c

@@ -537,6 +537,7 @@ intel_dp_aux_native_write(struct intel_dp *intel_dp,
 	uint8_t	msg[20];
 	int msg_bytes;
 	uint8_t	ack;
+	int retry;
 
 	if (WARN_ON(send_bytes > 16))
 		return -E2BIG;
@@ -548,19 +549,21 @@ intel_dp_aux_native_write(struct intel_dp *intel_dp,
 	msg[3] = send_bytes - 1;
 	memcpy(&msg[4], send, send_bytes);
 	msg_bytes = send_bytes + 4;
-	for (;;) {
+	for (retry = 0; retry < 7; retry++) {
 		ret = intel_dp_aux_ch(intel_dp, msg, msg_bytes, &ack, 1);
 		if (ret < 0)
 			return ret;
 		ack >>= 4;
 		if ((ack & DP_AUX_NATIVE_REPLY_MASK) == DP_AUX_NATIVE_REPLY_ACK)
-			break;
+			return send_bytes;
 		else if ((ack & DP_AUX_NATIVE_REPLY_MASK) == DP_AUX_NATIVE_REPLY_DEFER)
-			udelay(100);
+			usleep_range(400, 500);
 		else
 			return -EIO;
 	}
-	return send_bytes;
+
+	DRM_ERROR("too many retries, giving up\n");
+	return -EIO;
 }
 
 /* Write a single byte to the aux channel in native mode */
@@ -582,6 +585,7 @@ intel_dp_aux_native_read(struct intel_dp *intel_dp,
 	int reply_bytes;
 	uint8_t ack;
 	int ret;
+	int retry;
 
 	if (WARN_ON(recv_bytes > 19))
 		return -E2BIG;
@@ -595,7 +599,7 @@ intel_dp_aux_native_read(struct intel_dp *intel_dp,
 	msg_bytes = 4;
 	reply_bytes = recv_bytes + 1;
 
-	for (;;) {
+	for (retry = 0; retry < 7; retry++) {
 		ret = intel_dp_aux_ch(intel_dp, msg, msg_bytes,
 				      reply, reply_bytes);
 		if (ret == 0)
@@ -608,10 +612,13 @@ intel_dp_aux_native_read(struct intel_dp *intel_dp,
 			return ret - 1;
 		}
 		else if ((ack & DP_AUX_NATIVE_REPLY_MASK) == DP_AUX_NATIVE_REPLY_DEFER)
-			udelay(100);
+			usleep_range(400, 500);
 		else
 			return -EIO;
 	}
+
+	DRM_ERROR("too many retries, giving up\n");
+	return -EIO;
 }
 
 static int